Zuverlässigkeitsmethoden zur Beschleunigung von Qualifizierungsuntersuchungen für Steckkontakte
Reliability methods for accelerating qualification testing of connector contacts
Please always quote using this URN: urn:nbn:de:bvb:29-opus4-214769
- In dieser Arbeit wurde ein dreigliedriges Lösungssystem für thermische Lebensdauertest an automobilen Steckkontakten entwickelt. Das System beruhte dabei auf drei evolutionär entwickelten, aber dennoch unabhängig einsetzbaren Methoden zur Beschleunigung der Qualifizierungstests. Die Entkopplung der Einflüsse auf Steckverbinderkontakte durch einen Versuchsaufbau, bei dem Mikrobewegungen bei konstant erhöhter Temperatur eingebracht wurden, konnte keine statistisch signifikanten Beschädigungen auslösen. Hierfür wurde das Fehlen des Durchschreitens des Taupunktes als Ursache ausgemacht.
Auf Basis der Analyse des Pkw-Nutzungsverhaltens in Europa wurden realitätsnahe Lastprofile entwickelt.In dieser Arbeit wurde ein dreigliedriges Lösungssystem für thermische Lebensdauertest an automobilen Steckkontakten entwickelt. Das System beruhte dabei auf drei evolutionär entwickelten, aber dennoch unabhängig einsetzbaren Methoden zur Beschleunigung der Qualifizierungstests. Die Entkopplung der Einflüsse auf Steckverbinderkontakte durch einen Versuchsaufbau, bei dem Mikrobewegungen bei konstant erhöhter Temperatur eingebracht wurden, konnte keine statistisch signifikanten Beschädigungen auslösen. Hierfür wurde das Fehlen des Durchschreitens des Taupunktes als Ursache ausgemacht.
Auf Basis der Analyse des Pkw-Nutzungsverhaltens in Europa wurden realitätsnahe Lastprofile entwickelt. Mithilfe eines auf thermischen Zyklen beruhenden Profils konnte eine Beschleunigung der Ausfälle im Vergleich zu regulären Temperaturwechseltests erzielt werden. Die abschließende Methodik beruhte auf der Kombination von kalibrierten Lebensdauertests mit Raffungsmodellen zur. Dabei erwies sich das modifizierte Norris-Landzberg-Modell als geeignet, die Lebensdauer von Steckverbinderkontakten vorherzusagen. Der Einsatz der mit Raffungsmodellen kombinierten CALT-Methodik stellt daher eine vielversprechende Möglichkeit dar, um während der Entwicklung neuer Kontaktierungstechniken eine Hilfestellung bei der Beurteilung der Lebensdauer zu leisten.…
- This thesis developed and analytically evaluated three consecutive but independent methods for accelerating thermal qualification tests of automotive contacts. First, introduction of micro movements in the contact zone at constant elevated temperatures via a specific test setup, did not to cause statistically significant damage. This was due to the lack of passing the dew point and condensation of moisture in the contact zone. Second, the car usage behavior in Europe was analyzed and transferred to more realistic load profiles. These were carried out in relative motion tests at constant elevated temperatures and as a load profile based on thermal cycles. Only the thermal cycling load-profileThis thesis developed and analytically evaluated three consecutive but independent methods for accelerating thermal qualification tests of automotive contacts. First, introduction of micro movements in the contact zone at constant elevated temperatures via a specific test setup, did not to cause statistically significant damage. This was due to the lack of passing the dew point and condensation of moisture in the contact zone. Second, the car usage behavior in Europe was analyzed and transferred to more realistic load profiles. These were carried out in relative motion tests at constant elevated temperatures and as a load profile based on thermal cycles. Only the thermal cycling load-profile was able to cause significant damage in the contact zone faster than in regular thermal cycling tests.
Third, a methodology combined calibrated lifetime tests (CALT) with analytical methods for lifetime prediction. The modified Norris-Landzberg model provided a suitable and conservative lifetime prediction for the given connector application. In direct comparison with the conventional CALT-methodology, the combined method dramatically improved the prediction accuracy.
Therefore, the combination of the CALT methodology with acceleration models constitutes a promising way to assist lifetime assessment during development of new contacting technologies. Especially research projects benefit from the methodical way of estimating the lifetime at an early stage. This work was funded by the European Union’s European Regional Development Fund (ERDF).…
Author: | Matthias Friedlein |
---|---|
Persistent identifiers - URN: | urn:nbn:de:bvb:29-opus4-214769 |
Persistent identifiers - DOI: | https://doi.org/10.25593/978-3-96147-626-8 |
ISBN: | 978-3-96147-626-8 |
Series (Volume number): | FAU Studien aus dem Maschinenbau (419) |
Publisher: | FAU University Press |
Place: | Erlangen |
Editor: | Jörg Franke, Nico Hanenkamp, Tino Hausotte, Marion Merklein, Sebastian Müller, Michael Schmidt, Sandro Wartzack |
Referee: | Jörg Franke, Jürgen Wilde |
Advisor: | Jörg Franke |
Document Type: | Doctoral Thesis |
Language: | German |
Year of publication: | 2023 |
Date of online publication (Embargo Date): | 2023/01/29 |
Publishing Institution: | FAU University Press |
Granting institution: | Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU), Technische Fakultät |
Acceptance date of the thesis: | 2022/10/07 |
Release Date: | 2023/01/30 |
Tag: | ALT; Automobil; CALT; Temperaturwechsel; Zuverlässigkeitsuntersuchungen |
SWD-Keyword: | Zuverlässigkeit; Lebensdauer; Bordnetz; Kraftfahrzeugelektrik; Steckverbinder; Ingenieurwissenschaften; Maschinenbau; Produktionstechnik |
Length/size: | xxv, 162 Seiten |
Notes: | Parallel erschienen als Druckausgabe bei FAU University Press, ISBN: 978-3-96147-625-1 |
Original publication: | mb.fau.de/diss |
Institutes: | Technische Fakultät / Department Maschinenbau |
Technische Fakultät / Department Maschinenbau / Lehrstuhl für Fertigungsautomatisierung und Produktionssystematik (FAPS) | |
Dewey Decimal Classification: | 6 Technik, Medizin, angewandte Wissenschaften / 60 Technik / 600 Technik, Technologie |
6 Technik, Medizin, angewandte Wissenschaften / 62 Ingenieurwissenschaften / 620 Ingenieurwissenschaften und zugeordnete Tätigkeiten | |
open_access (DINI-Set): | open_access |
Collections: | Universität Erlangen-Nürnberg / FAU University Press |
Licence (German): | ![]() |