Refine
Document Type
- Doctoral thesis (1)
Has Fulltext
- yes (1)
Is part of the Bibliography
- no (1)
Year of publication
- 2011 (1)
Language
- English (1)
Keywords
- Bonden (1)
- D1 Luminescence band (1)
- D1 Lumineszenz Band (1)
- DLTS (1)
- Dislocation networks (1)
- Elektronische Eigenschaft (1)
- Poole-Frenkel Effekt (1)
- Poole-Frenkel effect (1)
- Silicium (1)
- Siliciumbauelement (1)
- Versetzungsnetzwerk (1)
- Wafer (1)
Institute
The thesis presents the results of the investigations of electronic properties and defect states of dislocation networks (DNs) in silicon produced by wafers direct bonding technique. Practical interest for the investigations in this area issued – first of all – from the potential application of such dislocation networks in microelectronics as all-Si light emitter for on-chip interconnection. Besides, dislocation networks may serve as a perfect model object to get new information about the fundamental properties of dislocations and grain boundaries in Si, what is of particular importance for multicrystalline silicon solar cells performance. Despite of a long story of studying of dislocations in silicon, a new insight into the understanding of their very attractive properties was succeeded due to the usage of a new, recently developed silicon wafer direct bonding technique, allowing to create regular dislocation networks with predefined dislocation types and densities. Samples for the investigations were prepared by hydrophilic bonding of p-type Si (100) wafers with same small misorientation tilt angle (~0,5°), but with four different twist misorientation angles Atw (being of <1°, 3°, 6° and 30°, respectively), thus giving rise to the different DN microstructure on every particular sample. The main experimental approach of this work was the measurements of current and capacitance of Schottky diodes prepared on the samples which contained the dislocation network at a depth that allowed one to realize all capabilities of different methods of space charge region spectroscopy (such as CV/IV, DLTS, ITS, etc.). The key tasks for the investigations were specified as the exploration of the DN-related gap states, their variations with gradually increasing twist angle Atw, investigation of the electrical field impact on the carrier emission from the dislocation-related states, as well as the establishing of the correlation between the electrical (DLTS), optical (photoluminescence PL) and structural (TEM) properties of DNs. The most important conclusions drawn from the experimental investigations and theoretical calculations can be formulated as follows: - DLTS measurements have revealed a great difference in the electronic structure of small-angle (SA) and large-angle (LA) bonded interfaces: dominating shallow level and a set of 6-7 deep levels were found in SA-samples with Atw of 1° and 3°, whereas the prevalent deep levels – in LA-samples with Atw of 6° and 30°. The critical twist misorientation angle separating SA- and LA- interfaces was estimated as Atw*≈ 3,5±0,5°, what agrees quiet well with the results of previous PL and TEM investigations. - For the dominating shallow traps in SA-samples (denoted as ST1/ST3 traps) a new phenomenon – that is ‘giant Poole-Frenkel effect’ of enhanced carrier emission due to dislocations elastic strain field was observed for the first time. Performed theoretical calculations have shown that in the investigated samples such an effect should be ascribed to the row of 60° dislocations rather than to the mesh of screw ones. In this respect, shallow traps ST1/ST3 were identified either with shallow 1D bands (directly or as being coupled with them) or with shallow stacking fault states on splitted 60° dislocation. - From the comparison and correlations of measured DLTS spectra with the results of PL and TEM investigations it was established, that shallow ST1/ST3 traps participate in D1 radiative recombination and that the structural elements, responsible for D1 luminescence of small-angle DNs, are the triple knots (intersections with screw dislocations) along the 60° dislocations. However, the optimal density of 60° dislocations as well as of triple knots, in other words – the optimal tilt and twist misorientation angles for maximal D1 intensity – needs further clarification.