Refine
Document Type
- Working paper (5)
Has Fulltext
- yes (5)
Is part of the Bibliography
- no (5)
Language
- English (5)
Keywords
- Gemischt-ganzzahlige Programmierung (5) (remove)
Institute
In wire-arc additive manufacturing, a wire is molten by an electrical or laser arc and deposited droplet-by-droplet to construct the desired workpiece, given as a set of two-dimensional layers. The weld source can move freely over a substrate plate, processing each layer, but there is also the possibility of moving without welding. A primary reason for stress inside the material is the large thermal gradient caused by the weld source, resulting in lower product quality. Thus, it is desirable to control the temperature of the workpiece during the process. One way of its optimization is the trajectory of the weld source. We consider the problem of finding a trajectory of the moving weld source for a single layer of an arbitrary workpiece that maximizes the quality of the part and derive a novel mixed-integer PDE-constrained model, including the calculation of a detailed temperature distribution measuring the overall quality. The resulting optimization problem is linearized and solved using the state-of-the-art numerical solver IBM CPLEX. Its performance is examined by several computational studies.
Since the beginning of its development in the 1950s, mixed integer programming (MIP) has been used for a variety of practical application problems, such as sequence optimization. Exact solution techniques for MIPs, most prominently branch-and-cut techniques, have the advantage (compared to heuristics such as genetic algorithms) that they can generate solutions with optimality certificates. The novel process of additive manufacturing opens up a further perspective for their use. With the two common techniques, Wire Arc Additive Manufacturing (WAAM) and Laser Powder Bed Fusion (LPBD), the sequence in which a given component geometry must be manufactured can be planned. In particular, the heat transfer within the component must be taken into account here, since excessive temperature gradients can lead to internal stresses and warpage after cooling. In order to integrate the temperature, heat transfer models (heat conduction, heat radiation) are integrated into a sequencing model. This leads to the problem class of MIPDECO: MIPs with partial differential equations (PDEs) as further constraints. We present these model approaches for both manufacturing techniques and carry out test calculations for sample geometries in order to demonstrate the feasibility of the approach.
We describe the problem of re-balancing a number of units distributed over a geographic area. Each unit consists of a number of components. A value between 0 and 1 describes the current rating of each component. By a piecewise linear function this value is converted into a nominal status assessment. The lowest of the statuses determines the efficiency of a unit, and the highest status its cost. An unbalanced unit has a gap between these two. To re-balance the units, components can be transferred. The goal is to maximize the efficiency of all units. On a secondary level, the cost for the re-balancing should be minimal. We present a mixed-integer nonlinear programming formulation for this problem, which describes the potential movement of components as a multi-commodity flow. The piecewise linear functions needed to obtain the status values are reformulated using inequalities and binary variables. This results in a mixed-integer linear program, and numerical standard solvers are able to compute proven optimal solutions for instances with up to 100 units. We present numerical solutions for a set of test instances and a bi-criteria objective function, and discuss the trade-off between cost and efficiency.
We consider the problem of planning an inspection flight to a given set of waypo- ints using an inhomogeneous fleet of multirotor, battery-driven micro aerial vehicles (MAVs). Therein, two subproblems must be solved. On the one side, the detailed trajectories of all MAVs must be planned, taking technical and environmental restrictions into account and on the other side, the MAVs must be assigned to the waypoints considering their installed equipment. The goal is to visit all waypoints in minimal time. The strong interaction of the two subproblems makes it necessary to tackle them simultaneously. Several aspects are taken into account to allow realistic solutions. A two-level time grid approach is applied to achieve smooth trajectories, while the flight dynamics of the MAVs are modeled in great detail. Safety distances must be maintained between them and they can recharge at charging stations located within the mission area. There can be polyhedral restricted air spaces that must be avoided. Furthermore, weather conditions are incorporated by polyhedral wind zones affecting the drones and each waypoint has a time window within it must be visited. We formulate this problem as a mixed-integer linear program and show whether the state-of-the-art numerical solver Gurobi is applicable to solve model instances.
We consider two mathematical problems that are connected and occur in the layer-wise production process of a workpiece using Wire-Arc Additive Manufacturing. As the first task, we consider the automatic construction of a honeycomb structure, given the boundary of a shape of interest. In doing this we employ Lloyd’s algorithm in two different realizations. For computing the incorporated Voronoi tesselation we consider the use of a Delaunay triangulation or alternatively, the eikonal equation. We compare and modify these approaches with the aim of combining their respective advantages.
Then in the second task, to find an optimal tool path guaranteeing minimal production time and high quality of the workpiece, a mixed-integer linear programming problem is derived. The model takes thermal conduction and radiation during the process into account and aims to minimize temperature gradients inside the material. Its solvability for standard mixed-integer solvers is demonstrated on several test-instances. The results are compared with manufactured workpieces.