TY - THES A1 - Le, Quang Huy T1 - Empirical large-signal modeling of 22-nm FDSOI CMOS transistors in RF/mm-Wave range T1 - Empirische Großsignal-Modellierung von 22-nm-FDSOI-CMOS-Transistoren im RF/mm-Wellenbereich N2 - In recent years, the deployment of the 5th generation (5G) telecommunications network has fuelled growing interest in low-power and low-cost wireless transceivers in the radio frequency integrated circuits (RFIC) market. With silicon-based complementary- metal-oxide-semiconductor (CMOS) technologies, the digital circuitries and the RF front-end can be implemented monolithically as a single system-on-chip (SoC). In such scenario, advanced fully depleted silicon-on-insulator (FDSOI) technology has emerged as a potential candidate to meet the market demand. In particular, the industry’s 22-nm FDSOI technology has been continuously matured in accordance with the development roadmap for 5G mm-wave applications. Research in transistor device modeling is of high importance to support the technology development process. Moreover, a large-signal model that accurately captures and reflects the transistor’s nonlinear behaviour is essential for circuit design and reliability analysis. Hence, this thesis deals with measurement-based approach, i.e., empirical modeling, to develop a suitable large-signal model for the mm-wave transistors in 22-nm FDSOI technology platform. A versatile and efficient large-signal model based on the Angelov (Chalmers) model is proposed in this work. Besides, artificial neural network (ANN) is utilized to model the gate charge of the transistors. Moreover, the systematic modeling procedure addresses many important issues to ensure good model-to-hardware correlation. The proposed model is well validated for small-signal operation up to 110 GHz. Furthermore, by means of non- 50-Ω large-signal measurements, the excellent model validity to predict the nonlinear distortions of the FDSOI transistors is also comprehensively demonstrated. Finally, to evaluate the model applicability in RF circuit design, the proposed model is implemented in a commercial circuit simulator for the design of a wideband 22-nm FDSOI power amplifier. N2 - In den letzten Jahren hat die Einführung des Telekommunikationsnetzes der 5. Generation (5G) das Interesse an stromsparenden und kostengünstigen drahtlosen Transceivern auf dem Markt für integrierte Hochfrequenzschaltungen (RFIC) geschürt. Mit siliziumbasierten Complementary-Metal-Oxide-Semiconductor (CMOS)-Technologien können die digitalen Schaltkreise und das HF-Front-End monolithisch als ein einziges System-on-Chip (SoC) implementiert werden. In einem solchen Szenario hat sich die fortschrittliche Fully-Depleted-Silicon-On-Insulator (FDSOI) als potenzieller Kandidat herausgestellt, um die Marktnachfrage zu erfüllen. Insbesondere die 22-nm-FDSOI-Technologie der Industrie wurde gemäß der Entwicklungs-Roadmap für 5G-mm-Wellen-Anwendungen kontinuierlich weiterentwickelt. Forschung im Bereich der Transistor-Bauelementemodellierung ist von großer Bedeutung, um den Technologieentwicklungsprozess zu unterstützen. Darüber hinaus ist ein Großsignalmodell, welches das nichtlineare Verhalten des Transistors genau erfasst und widerspiegelt, für das Schaltungsdesign und die Zuverlässigkeitsanalyse unerlässlich. Daher befasst sich diese Arbeit mit einem messbasierten Ansatz, d. h. empirischer Modellierung, um ein geeignetes Großsignalmodell für die mm-Wellen-Transistoren in der 22-nm-FDSOI-Technologieplattform zu entwickeln. In dieser Arbeit wird ein vielseitiges und effizientes Großsignalmodell auf der Grundlage des Angelov (Chalmers)-Modells vorgeschlagen. Außerdem wird ein künstliches neuronales Netzwerk (KNN) verwendet, um die Gate-Ladung der Transistoren zu modellieren. Darüber hinaus spricht das systematische Modellierungsverfahren viele wichtige Punkte an, um eine gute Korrelation zwischen Modell und Hardware sicherzustellen. Das vorgeschlagene Modell ist für den Kleinsignalbetrieb bis 110 GHz gut validiert. Darüber hinaus wird anhand von Nicht-50-Ω-Großsignalmessungen die hervorragende Modellvalidität zur Vorhersage der nichtlinearen Verzerrungen der FDSOI-Transistoren umfassend demonstriert. Um schließlich die Anwendbarkeit des Modells im HF-Schaltungsdesign zu bewerten, wird das vorgeschlagene Modell in einem kommerziellen Schaltungssimulator für den Entwurf eines Breitband-22-nm-FDSOI-Leistungsverstärkers implementiert. KW - mm-wave KW - 22-nm KW - FDSOI KW - CMOS KW - ANN KW - Large-signal model KW - KNN KW - Großsignalmodell KW - mm-Wellen KW - Modellierung KW - Großsignalverhalten KW - Transistor KW - SOI-Technik KW - CMOS-Schaltung KW - Milimeterwelle KW - 5G Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-68077 ER - TY - JOUR T1 - Amtliches Mitteilungsblatt der BTU Cottbus–Senftenberg, 2024, 30 (29.08.2024) N2 - Fünfte Änderungssatzung zur Allgemeinen Prüfungs- und Studienordnung für Master-Studiengänge (RahmenO-MA) Lesefassung: Allgemeine Prüfungs- und Studienordnung für Master-Studiengänge an der BTU Cottbus–Senftenberg (RahmenO-BA) vom 12. September 2016 i. d. F. der Fünften Änderungssatzung zur Allgemeine Prüfungs- und Studienordnung für Master-Studiengänge an der BTU Cottbus–Senftenberg (RahmenO-BA) vom 27. August 2024 T3 - Amtliches Mitteilungsblatt der BTU Cottbus–Senftenberg - 2024, H.30 Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-67731 ER - TY - JOUR T1 - Amtliches Mitteilungsblatt der BTU Cottbus–Senftenberg, 2024, 29 (29.08.2024) N2 - Fünfte Änderungssatzung zur Allgemeinen Prüfungs- und Studienordnung für Bachelor-Studiengänge (RahmenO-BA) Lesefassung: Allgemeine Prüfungs- und Studienordnung für Bachelor-Studiengänge an der BTU Cottbus–Senftenberg (RahmenO-BA) vom 12. September 2016 i. d. F. der Fünften Änderungssatzung zur Allgemeine Prüfungs- und Studienordnung für Bachelor-Studiengänge an der BTU Cottbus–Senftenberg (RahmenO-BA) vom 27. August 2024 T3 - Amtliches Mitteilungsblatt der BTU Cottbus–Senftenberg - 2024, H.29 Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-67724 ER - TY - THES A1 - Bytyqi, Afrim T1 - Beneath the surface : unmasking the hidden risks and disadvantages of outsourcing in early drug development T1 - Unter der Oberfläche : Aufdeckung der versteckten Risiken und Nachteile des Outsourcings in der frühen Arzneimittelentwicklung N2 - This research examines the impact of outsourcing on knowledge and technology development in clinical research, with a particular focus on early drug development. It explores how outsourcing, while offering short-term advantages such as cost reduction and access to specialized expertise, can lead to long-term disadvantages such as loss of knowledge, reduced scientific integrity and altered power dynamics between sponsors and vendors. The study highlights the ethical and philosophical implications of transferring responsibilities to vendors, including the potential for reduced autonomy and expertise among sponsor personnel and the risks associated with reliance on vendor-generated data. To address these challenges, an alternative operating model is proposed that emphasizes shared responsibility and greater involvement of sponsor staff in research activities to maintain knowledge integrity, ensure research quality and promote professional development. N2 - Dieses Forschungsprojekt untersucht die Auswirkungen von Outsourcing auf die Entwicklung von Wissen und Technologie in der klinischen Forschung, mit besonderem Schwerpunkt auf den frühen Phasen der Arzneimittelentwicklung. Es wird untersucht, wie Outsourcing kurzfristige Vorteile wie Kostenreduktion und Zugang zu spezialisierter Expertise bietet, aber auch langfristige Nachteile wie Wissensverlust, Beeinträchtigung der wissenschaftlichen Integrität und veränderte Machtverhältnisse zwischen Sponsoren und Vendoren mit sich bringen kann. Die Studie beleuchtet die ethischen und philosophischen Implikationen der Übertragung von Verantwortung an Vendoren, einschließlich des potenziellen Verlustes an Autonomie und Expertise für Sponsoren, sowie die Risiken, die mit der Abhängigkeit von den durch Vendoren generierten Daten verbunden sind. Um diesen Herausforderungen zu begegnen, wird ein alternatives Betriebsmodell vorgeschlagen, das den Schwerpunkt auf geteilte Verantwortlichkeiten und eine stärkere Einbeziehung des Sponsorpersonals in die Forschungsaktivitäten legt, um die Integrität des Wissens zu wahren, die Qualität der Forschung zu sichern und die berufliche Entwicklung zu fördern. KW - Wissensentwicklung KW - Hidden risks KW - Disadvantages of outsourcing KW - Early drug development KW - Responsibility KW - Knowledge development KW - Versteckte Risiken KW - Nachteile des Outsourcings KW - Frühe Arzneimittelentwicklung KW - Verantwortung KW - Arzneimittelentwicklung KW - Outsourcing KW - Risikoanalyse Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-68027 ER - TY - THES A1 - Rohde-Abuba, Caterina T1 - Un/doing Migration : understanding the performativity of migrant identities in care work T1 - Un/Doing Migration : die Performativität von Migrationsidentitäten in Care Work N2 - This Rahmenpapier discusses the performativity approaches of Bourdieu and Butler as reflexive research perspectives on the social construction of migrant and refugee identities. Focusing on the performativity of speech acts and emotionalized enactments, I employ empirical data examples about commodified and familial care work that reveals how migration and refugeeness are constituted in micro-level face-to-face interactions. Introducing the concepts of doing, undoing and not doing migration/refugeeness, I show different care performances that reproduce, transform or subvert social identities in the interplay of individual agency with the social regulation by institutional, organizational and discursive structures of the national migration, asylum and integration regimes. Throughout the paper, I argue that the social order of migration/refugeeness is biopolitical and postcolonial: drawing on historical images of orientalism, social positions of internal others are constituted and simultaneously subordinated to the majority society. Regulated by biopolitical means of administration and disciplining, social processes of doing of migration/refugeeness generate affective values in the images of internal and external others, who supposedly depend on the care and control of the hegemonic nation. When 'migrant/refugee workers' are used as an effective and economical solution to the increasing labor demand of the nation and when 'refugee families' become a commodity on the national market of public and private social services, the social order of migration/refugeeness materializes in productive values that benefit the nation state. N2 - Dieses Rahmenpapier behandelt die Performativitätsansätze von Bourdieu und Butler als reflexive Forschungsperspektiven auf die soziale Konstruktion von Migrations- und Fluchtidentitäten. Datenbeispiele zu kommerzialisierter und familiärer care work zeigen, dass Migration und Flucht auf der Mikro-Ebene in emotionalisierten Sprechakten und Interaktionen konstituiert werden. Mithilfe von Konzepten des doing, not doing und undoing migration/refugeeness wird untersucht, wie care Praktiken soziale Identitäten im Zusammenspiel von individuellen Handlungen mit der Regulierung durch nationale Migrations-, Asyl- und Integrationsregime produzieren, transformieren oder subvertieren. Ich argumentiere, dass die soziale Ordnung von Migration/Flucht biopolitisch und postkolonial ist: Unter Rückgriff auf historische Bilder des Orientalismus werden soziale Positionen interner Anderer konstituiert und gleichzeitig der Mehrheitsgesellschaft untergeordnet. Reguliert durch biopolitische Mittel der Administration und Disziplinierung erzeugen soziale Prozesse des doing migration/refugeeness affektive Werte in den Imaginationen interner und externer Anderer bezüglich ihrer mutmaßlichen Abhängigkeit von Fürsorge und Kontrolle durch die hegemoniale Mehrheitsgesellschaft. Indem „Migranten/Flüchtlinge“ als effektive und wirtschaftliche Lösung für den steigenden Arbeitskräftebedarf der kommerzialisierten care work genutzt werden und „Flüchtlingsfamilien“ als Objekte von Sozialdienstleistungen der öffentlichen care work herangezogen werden, materialisiert sich die soziale Ordnung von Migration/Flucht in produktiven Werten, die dem Nationalstaat zugutekommen. KW - Refugeenes KW - Migration KW - Reflexivity KW - Performativity KW - Identities KW - Flucht KW - Performativität KW - Identität KW - Biopolitik KW - Biopolitik KW - Flüchtlingslager KW - Identität KW - Performativität Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-67947 ER - TY - THES A1 - Perez-Bosch Quesada, Emilio T1 - In-depth electrical characterization of HfO₂-based memristive devices for their integration in CMOS-compatible neuromorphic systems T1 - Elektrische Charakterisierung von HfO₂-basierten memristiven Bauelementen zur Integration in CMOS-kompatible neuromorphe Systeme N2 - The rapid development of information and communication technologies is reaching critical limits that might compromise the global digitalization progress, one of the main economy pillars nowadays. Among others, limits like the end of Moore’s law, derived from miniaturization issues in nano-scale devices; the need for massive data processing parallelization due to the ever-increasing amount of data generated in every single aspect of our daily routine; and the acute increase of the annual electricity consumption in data center due to energy inefficiency in their computational architectures. Therefore, the need for partial or complete migration of current computing paradigms towards more sustainable ones is of paramount importance to bypass these limits. Neuromorphic computing systems inspired by the neural and synaptic activity of the human brain irrupted as an innovative alternative to merge memory and computing units, traditionally separated following the von Neumann architecture. Emerging non-volatile memory technologies, specifically the Resistive Random Access Memory (RRAM) technology, are playing important roles in the development of new computing paradigms due to their outstanding properties, namely, fast switching, high scalability, long state retention and their multilevel-cell capabilities, among others. The later stands out as a key feature to increase memory densities at lower area cost and it lately gathered special interest concerning neuromorphic applications. Due to the uncertainty surrounding the stochastic processes governing the resistive switching of the RRAM technology, here is still scarce number of real RRAM-based hardware implementations. In this work, motivated by the impact of the inherent stochasticity of the RRAM technology on neuromorphic systems’ performance, a thorough wafer-scale electrical characterization is carried out over HfO2-based RRAM devices to study their quasistatic response. Their non-idealities are identified, in a way that they could be modelled and potentially mitigated to enhance the memristive devices stability and thus, their performance carrying out multiply-accumulate (MAC) tasks, fundamental operations for the implementation of artificial intelligence (AI) applications. This characterization supports the adaptation of three physics-based compact models and an empirical study of vector-matrix multiplication (VMM) operations performed using real RRAM devices for neuromorphic applications. The impact of the devices’ non-idealities on the final operation results is assessed along consecutive VMMs. This work sets the baseline of the quasistatic characterization of IHP’s RRAM devices and opens the way towards real ardware neuromorphic systems with such technology. N2 - Durch die immer schnelle voranschreitende Entwicklung von Informations- und Kommunikationstechnologien werden kritische Grenzen erreicht, die dem globalen Digitalisierungsprozess im Wege stehen. Eine dieser Grenzen ist das Mooresche Gesetz, welches den Skalierungsprozess von integrierten Schaltkreisen beschreibt. Außerdem steigt der Bedarf der Informationsverarbeitung von digitalen Daten und damit dem globalen Energieverbrauch stetig an. Deshalb müssen herkömmliche Rechnerstrukturen durch neue nachhaltigere Konzepte, welche energiesparender arbeiten sollen, ersetzt werden. In klassischen von-Neumann Computern sind das Speicher- und Rechenwerk voneinander getrennt. Eine Möglichkeit, die angesprochenen Grenzen zu überwinden, sind neuromorphe Rechner, welche von neuronalen Strukturen inspiriert sind, in denen speichernde Bauelemente gleichzeitig einen Teil der Rechnung Übernehmen (In-Memory Computing). Eine dafür geeignete Technologie ist RRAM (Resistive Random Access Memory), dank deren Eigenschaften wie: Nichtflüchtigkeit, gute Skalierbarkeit, schnelles Schaltverhalten, lange Rentention-Zeiten und der Speichermöglichkeit mehrerer Bits pro Zelle. Gerade die zuletzt genannte Eigenschaft ist wichtig, um kompakte In-Memory Computing Einheiten für neuromorphe Anwendungen zu entwickeln. Des Weiteren können RRAM-Speicherzellen zusammen mit Transistoren in integrierten Schaltkreisen gefertigt werden. Auf Grund verschiedener Nicht-Idealitäten der RRAM-Bauelemente gibt es bis zum heutigen Zeitpunkt nur wenige neuromorphe RRAM-Systeme. In dieser Arbeit wird eine umfängliche On-Wafer Untersuchung zum statischen Verhalten von integrierten HfO2-basierten RRAM-Bauelementen durchgeführt. Die angesprochenen Nicht-Idealitäten werden auf Grundlage der Messwerte quantisiert und Empfehlungen, wie dieses stochastische Verhalten für Anwendungen der künstlichen Intelligenz genutzt werden können gegeben. Diese Charakterisierung hilft bei der Adapation von drei physikalischen RRAM-Modellen. Ausgehend von den Messungen wird der Einsatz von RRAMs für die Berechnung von Vektor-Matrix Multipliationen (VMMs) überprüft. Diese mathematische Operation ist in neuromorphen Anwendungen allgegenwärtig. Es wird weiterhin untersucht, wie die Nicht-Idealitäten der RRAMs sich auf das Rechenergebnis auswirkt. Diese Arbeit legt durch die Charakterisierung von IHP‘s RRAM-Technologie den Grundstein für energieeffiziente neuromorphe Hardware-Beschleuniger mit eben dieser Technologie. KW - Vector-matrix multiplications, KW - Neuromorphic computing KW - RRAM KW - Non-volatile KW - Vektor-Matrix-Multiplikationen KW - RRAM KW - Neuromorphes Rechnen KW - Neuromorphing KW - Neuronales Netz KW - Resistive RAM Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-67815 ER - TY - RPRT A1 - Zink, Benita A1 - Fritsch, Manuel T1 - Braunkohleausstieg in der Lausitz : Volks- und betriebswirtschaftliche Konsequenzen T1 - Brown coal phase-out in Lusatia : economic and business consequences N2 - Der geplante Braunkohleausstieg bis 2038 stellt die Lausitz vor große wirtschaftliche Herausforderungen, da die Region stark von der Braunkohleindustrie abhängig ist. Im Jahr 2021 waren in der Lausitz etwa 6.370 Personen direkt in der Braunkohleindustrie beschäftigt, wobei fast 940 Millionen Euro Wertschöpfung generiert wurden. Indirekt hängen weitere 5.195 Arbeitsplätze und zusätzliche Wertschöpfung von der Industrie ab, was insgesamt 11.565 Arbeitsplätze und 1,5 Milliarden Euro Wertschöpfung ausmacht – das entspricht 2,2 Prozent der regionalen Arbeitsplätze und 4,6 Prozent der Bruttowertschöpfung. Der Produktionswert der Braunkohleindustrie beläuft sich auf 4,5 Milliarden Euro oder 6,6 Prozent der regionalen Produktion. Die Umstrukturierung der Wirtschaft ist notwendig, um den Wegfall dieser Wertschöpfung zu kompensieren. Besonders betroffen werden die direkt in der Braunkohleindustrie Beschäftigten sein, aber auch die vorgelagerten Zulieferer sind erheblich gefährdet. Die Analyse zeigt, dass 18 Prozent der 4.273 Arbeitsplätze in der Vorleistungsgüterherstellung für die Braunkohleindustrie als gering gefährdet gelten, da sie alternative Absatzmärkte finden könnten. 56 Prozent der Arbeitsplätze sind mittelmäßig gefährdet, darunter wertschöpfungsintensive Branchen wie Teile des Verarbeitenden Gewerbes und bestimmte Dienstleistungen. Hochgefährdet sind 26 Prozent der Arbeitsplätze, insbesondere in der Logistik und im Transport. Sollten die gefährdeten Vorleistungsarbeitsplätze verloren gehen, entspräche dies einem Rückgang von 1,3 Prozent der gesamten Wertschöpfung in der Lausitz. Auch der durch den Konsum der braunkohleabhängigen Beschäftigten generierte wirtschaftliche Impuls ist durch den Braunkohleausstieg bedroht. Der Einkommenseffekt wird den Konsum erheblich mindern, insbesondere wenn viele Arbeitsplätze in der Braunkohleindustrie und ihren Zulieferunternehmen wegfallen. Um die negativen Effekte abzufedern und eine Abwanderung zu vermeiden, ist es entscheidend, den von Arbeitslosigkeit betroffenen Personen Perspektiven in der Region zu bieten. Zusammengefasst zeigt die Studie, dass der Braunkohleausstieg erhebliche wirtschaftliche Risiken für die Lausitz birgt, sowohl direkt in der Braunkohleindustrie als auch in den vorgelagerten Branchen. Ein frühzeitiges Erschließen alternativer Absatzmärkte und Investitionsimpulse sind entscheidend, um die negativen Auswirkungen zu minimieren und die regionale Wirtschaft nachhaltig umzustrukturieren. N2 - The planned phase-out of lignite by 2038 poses major economic challenges for Lusatia, as the region is heavily dependent on the lignite industry. In 2021, around 6,370 people in Lusatia were directly employed in the lignite industry, generating almost 940 million euros in added value. A further 5,195 jobs and additional added value depend indirectly on the industry, making a total of 11,565 jobs and 1.5 billion euros in added value - this corresponds to 2.2 percent of regional jobs and 4.6 percent of gross value added. The production value of the lignite industry amounts to 4.5 billion euros or 6.6 percent of regional production. The restructuring of the economy is necessary to compensate for the loss of this added value. Those directly employed in the lignite industry will be particularly affected, but upstream suppliers are also at considerable risk. The analysis shows that 18 percent of the 4,273 jobs in intermediate goods manufacturing for the lignite industry are considered to be at low risk because they could find alternative sales markets. 56 percent of the jobs are at medium risk, including value-added-intensive sectors such as parts of the manufacturing industry and certain services. 26 percent of the jobs are at high risk, particularly in logistics and transport. If the intermediate goods jobs at risk were to be lost, this would correspond to a decline of 1.3 percent of the total value added in Lusatia. The economic stimulus generated by the consumption of lignite-dependent employees is also threatened by the lignite phase-out. The income effect will significantly reduce consumption, especially if many jobs in the lignite industry and its suppliers are lost. In order to cushion the negative effects and prevent migration, it is crucial to offer prospects in the region to those affected by unemployment. In summary, the study shows that the phasing out of lignite poses significant economic risks for Lusatia, both directly in the lignite industry and in the upstream sectors. Early development of alternative sales markets and investment incentives are crucial to minimising the negative effects and restructuring the regional economy in a sustainable manner. KW - Braunkohleausstieg KW - Lausitz KW - Konsequenzen KW - Lausitz KW - Strukturwandel KW - Braunkohlentagebau KW - Auswirkung KW - Braunkohlenindustrie KW - Wertschöpfungskette KW - Privater Verbrauch KW - Brown coal phase-out KW - Lusatia KW - Consequences Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-67874 ER - TY - JOUR A1 - Klug, Marius A1 - Berg, Timo A1 - Gramann, Klaus T1 - Optimizing EEG ICA decomposition with data cleaning in stationary and mobile experiments JF - Scientific Reports N2 - Electroencephalography (EEG) studies increasingly utilize more mobile experimental protocols, leading to more and stronger artifacts in the recorded data. Independent Component Analysis (ICA) is commonly used to remove these artifacts. It is standard practice to remove artifactual samples before ICA to improve the decomposition, for example using automatic tools such as the sample rejection option of the AMICA algorithm. However, the effects of movement intensity and the strength of automatic sample rejection on ICA decomposition have not been systematically evaluated. We conducted AMICA decompositions on eight open-access datasets with varying degrees of motion intensity using varying sample rejection criteria. We evaluated decomposition quality using mutual information of the components, the proportion of brain, muscle, and 'other' components, residual variance, and an exemplary signal-to-noise ratio. Within individual studies, increased movement significantly decreased decomposition quality, though this effect was not found across different studies. Cleaning strength significantly improved the decomposition, but the effect was smaller than expected. Our results suggest that the AMICA algorithm is robust even with limited data cleaning. Moderate cleaning, such as 5 to 10 iterations of the AMICA sample rejection, is likely to improve the decomposition of most datasets, regardless of motion intensity. KW - Electroencephalography KW - Independent component analysis KW - Signal-to-Noise Ratio KW - Elektroencephalographie KW - Signal-Rausch Abstand KW - Unabhängige Komponentenanalyse Y1 - 2023 U6 - https://doi.org/10.1038/s41598-024-64919-3 SN - 2045-2322 VL - 14 PB - Springer CY - Heidelberg ER - TY - JOUR A1 - Khan, Muhammad Moman A1 - Sidorczuk, Katarzyna A1 - Becker, Juliane A1 - Aleksandrowicz, Adrianna A1 - Baraniewicz, Karolina A1 - Ludwig, Christina A1 - Ali, Aamir A1 - Kingsley, Robert A. A1 - Schierack, Peter A1 - Kolenda, Rafał T1 - Characterization of clumpy adhesion of Escherichia coli to human cells and associated factors influencing antibiotic sensitivity JF - Microbiology Spectrum N2 - Escherichia coli intestinal infection pathotypes are characterized by distinct adhesion patterns, including the recently described clumpy adhesion phenotype. Here, we identify and characterize the genetic factors contributing to the clumpy adhesion of E. coli strain 4972. In this strain, the transcriptome and proteome of adhered bacteria were found to be distinct from planktonic bacteria in the supernatant. A total of 622 genes in the transcriptome were differentially expressed in bacteria present in clumps relative to the planktonic bacteria. Seven genes targeted for disruption had variable distribution in different pathotypes and non-pathogenic E. coli, with the pilV and spnT genes being the least frequent or absent from most groups. Deletion (Δ) of five differentially expressed genes, flgH, ffp, pilV, spnT, and yggT, affected motility, adhesion, or antibiotic stress. ΔflgH exhibited 80% decrease and ΔyggT depicted 184% increase in adhesion, and upon complementation, adhesion was significantly reduced to 13%. ΔflgH lost motility and was regenerated when complemented, whereas Δffp had significantly increased motility, and reintroduction of the same gene reduced it to the wild-type level. The clumps produced by Δffp and ΔspnT were more resistant and protected the bacteria, with ΔspnT showing the best clump formation in terms of ampicillin stress protection. ΔyggT had the lowest tolerance to gentamicin, where the antibiotic stress completely eliminated the bacteria. Overall, we were able to investigate the influence of clump formation on cell surface adhesion and antimicrobial tolerance, with the contribution of several factors crucial to clump formation on susceptibility to the selected antibiotics. KW - Escherichia coli KW - Clumpy adhesion KW - Motility KW - Antibiotic tolerance KW - Stress KW - Escherichia coli KW - Zelladhäsion KW - Phänotyp KW - Genanalyse Y1 - 2024 U6 - https://doi.org/10.1128/spectrum.02606-23 SN - 2165-0497 VL - 12 IS - 5 PB - American Society for Microbiology (ASM) CY - Washington, DC ER - TY - JOUR A1 - Hasanuzzaman, Gazi A1 - Buchwald, Tom A1 - Schunk, Christoph A1 - Schröder, Andreas A1 - Egbers, Christoph A1 - Hampel, Uwe T1 - DATIV - Remote enhancement of smart aerosol measurement system using Raspberry Pi based distributed sensors JF - Sensors N2 - Enclosed public spaces are the hotspots for airborne disease transmission. To measure and maintain indoor air quality in terms of airborne transmission, an open source, low cost and distributed array of Particulate Matter Sensors has been developed and named as Dynamic Aerosol Transport for Indoor Ventilation or DATIV system. This system can use multiple Particulate Matter Sensors (PMS) simultaneously and can be remotely controlled using a Raspberry Pie based operating system. The data acquisition system can be easily operated using the GUI within any common browser installed on a remote device such as a PC or Smartphone with corresponding IP address. The software architecture and validation measurements are presented together with possible future developments. KW - Particulate matter KW - Aerosol KW - Low cost measurement system KW - Distributed sensors KW - Indoor ventilation Y1 - 2024 U6 - https://doi.org/10.3390/s24134314 SN - 1424-8220 VL - 24 IS - 13 PB - MDPI CY - Basel ER -