TY - CHAP ED - Schwarz, Harald ED - Janik, Przemysław ED - Gono, Radomir ED - Lehmann, Dirk T1 - 21st EEEIC International Conference on Environment and Electrical Engineering – Student Edition : Wrocław - Ostrava - Cottbus, June 2022 N2 - In the time of increased awareness about the environment problems by the public opinion and also intensive international efforts to reduce emissions of greenhouse gases, as well increase of the generation of electrical energy to facilitate industrial growth, the conference offers broad contribution towards achieving the goals of diversification and sustainable development. Focus of the student conference is to promote the discussion of views from scientists and students from Wroclaw University of Technology, Technical University of Ostrava and Brandenburg University of Technology Cottbus-Senftenberg. The conference is a unique teaching session motivating the students to write science related papers, prepare presentations and discus future developments. It is a formal part of the curriculum offered as an elective module, accompanied by a technical excursion. KW - Energiequalität KW - Energieressourcen KW - Energietechnik KW - Energiewende KW - Umweltmanagement KW - Energy resources KW - Energy system transformation KW - Environmental management KW - Power quality KW - Elektrische Energie KW - Energietechnik KW - Energievorrat KW - Umweltbezogenes Management Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-59982 SN - 978-3-940471-71-0 ER - TY - THES A1 - Li, Yang T1 - Implementation of a network cluster model for large-scale renewable power estimation and effective energy utilization T1 - Implementierung eines Netzcluster-Modells zur Schätzung der Leistung erneuerbarer Energien im großen Maßstab und zur effektiven Energienutzung N2 - With the large-scale expansion of decentralized power generation from renewable energy resources (RES) and reduction of fossil fuel-based power generation, this leads to fundamental structural changes in the power supply system. The transition is characterized by a shift from central to decentral, from directional to bi-directional. As the share of renewable power systems in the electricity grid increases, the inherent uncertainty of renewable energies poses challenges to the grid system’s stability. To achieve increased efficiency, decarbonisation, decentralization, and digitisation in energy sector, a flexible and resilient energy system is required. Electrical energy data and non-electrical energy data are generated from various sources, including the supervisory control and data acquisition system (SCADA), geographic information system (GIS), and weather information system. Based on these data, different spatial and temporal models of energy systems and their databases are created and connected. This thesis contributes to the analysis of regional power performance. To this end, an efficient simplified grid-oriented network cluster is presented to account for the regional allocation of RES power systems. The model clustering includes the grid topology, temporal and spatial resolution, and the structure of electrical and non-electrical data. This approach contributes to methodological aspects of energy system modelling and analysis. In addition, based on the proposed cluster model, this thesis presents the physical profile-based and data-driven methods to estimate the regional large-scale photovoltaic (PV) and wind power generations. In order to adapt to the spatial-temporal heterogeneity of the regional renewable power generations and to improve the local power utilization rate, this thesis conducts empirical analyses of the regional energy storage and combined PV and wind power systems using cable pooling with shared grid connection. In summary, this thesis presents a flexible modelling approach that takes into account the regional allocation of renewable power systems and enables a more accurate estimation of regional power generation. The proposed model and analytical methods can help the efficiency and resiliency of the energy system and support the transition towards renewable energies. N2 - Mit dem großflächigen Ausbau der dezentralen Energieerzeugung aus erneuerbaren Energiequellen (RES) und der Reduzierung der fossilbasierten Energieerzeugung kommt es zu grundlegenden strukturellen Veränderungen im Stromversorgungssystem. Der Übergang ist durch einen Wandel von zentral zu dezentral und von direktional zu bi-direktional gekennzeichnet. Mit zunehmendem Anteil erneuerbarer Energiesysteme im Stromnetz stellen die inhärente Unsicherheit dieser Energien Herausforderungen für die Stabilität des Netzes dar. Um eine erhöhte Effizienz, Dekarbonisierung, Dezentralisierung und Digitalisierung im Energiesektor zu erreichen, ist ein flexibles und robustes Energiesystem erforderlich. Elektrische Energie- und Nichtelektrische Energiemessdaten werden aus verschiedenen Quellen generiert, einschließlich des Supervisory Control and Data Acquisition Systems (SCADA), des Geographic Information Systems (GIS) und des Wetterinformationssystems. Basierend auf diesen Daten werden verschiedene räumliche und zeitliche Modelle von Energiesystemen und deren Datenbanken erstellt und miteinander verbunden. Diese Arbeit trägt zur Analyse der regionalen Leistung bei. Zu diesem Zweck wird ein effizientes, vereinfachtes netzorientiertes Clustermodell vorgestellt, um die regionale Zuordnung von RES-Energiesystemen zu berücksichtigen. Das Modell-Clustering umfasst die Netztopologie, zeitliche und räumliche Auflösung sowie die Struktur der elektrischen und nichtelektrischen Daten. Dieser Ansatz trägt zu methodischen Aspekten der Energiemodellierung und -analyse bei. Darüber hinaus präsentiert diese Arbeit auf der Grundlage des vorgeschlagenen Clustermodells physikbasierte und datengetriebene Methoden zur Schätzung der regionalen großflächigen Photovoltaik- (PV) und Windstromerzeugung. Um sich an die räumlich-zeitliche Heterogenität der regionalen erneuerbaren Stromerzeugung anzupassen und die lokale Stromnutzungsgrade zu verbessern, führt diese Arbeit empirische Analyse der regionalen Energiespeicherung und kombinierte PV- und Windenergiesysteme unter Verwendung von Kabel-Pooling mit gemeinsam genutzten Netzverbindungen durch. Zusammenfassend präsentiert diese Arbeit einen flexiblen Modellierungsansatz, der die regionale Zuordnung von erneuerbaren Energiesystemen berücksichtigt und eine genauere Schätzung der regionalen Stromerzeugung ermöglicht. Das vorgeschlagene Modell und die Analysemethoden können die Effizienz und Robustheit des Energiesystems verbessern und den Übergang zu erneuerbaren Energien unterstützen. KW - Decentralized power generation KW - Energy system modelling and analysis KW - Regional power generation KW - Grid-oriented network cluster KW - Regional energy storage KW - Dezentrale Stromerzeugung KW - Erneuerbare Energien KW - Elektrisches Energiesystem KW - Elektrizitätsversorgungsnetz KW - Dezentrale Energieversorgung KW - Dezentrale Elektrizitätserzeugung KW - Energiesystemmodellierung und -analyse KW - Regionale Stromerzeugung KW - Netzorientiertes Netzcluster KW - Regionale Energiespeicherung Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-64562 ER - TY - CHAP ED - Schwarz, Harald ED - Janiik, Przemyslaw ED - Gono, Radomir ED - Lehmann, Dirk T1 - 14th EEEIC International Conference on Environment and Electrical Engineering – Student Edition : Wrocław-Ostrava-Cottbus 8th – 12th of June 2015 N2 - In the time of increased awareness about the environment problems by the public opinion and also intensive international efforts to reduce emissions of greenhouse gases, as well increase of the generation of electrical energy to facilitate industrial growth, the conference offers broad contribution towards achieving the goals of diversification and sustainable development. Focus of the student conference is to promote the discussion of views from scientists and students from Wroclaw University of Technology, Technical University of Ostrava and Brandenburg Technical University of Cottbus. The conference offers prominent academics and industrial practitioners from all over the world the forum for discussion about the future of electrical energy and environmental issues and presents a base for identifying directions for continuation of research. KW - Energiequalität KW - Elektrische Energie KW - Energietechnik KW - Energievorrat KW - Umweltbezogenes Management KW - Energieressourcen KW - Energietechnik KW - Energiewende KW - Umweltmanagement KW - Energy resources KW - Energy system transformation KW - Environmental management KW - Power quality Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-56789 SN - 978-3-940471-35-2 ER - TY - THES A1 - Shevchenko, Iaroslav T1 - Ein Beitrag zum Online-Monitoring von Teilentladungen in Betriebsmitteln des Höchstspannungsnetzes T1 - A contribution to the online monitoring of partial discharges in high-voltage grid components N2 - Mit der zunehmenden Nutzung von Hochspannungs-Stromkabeln, insbesondere durch das Aufkommen langer HVDC(HGÜ)-Leitungen, entsteht die Notwendigkeit, ihren Zustand sensibel zu überwachen, etwa durch die Verfolgung der Entstehung und Entwicklung von Teilentladungen. Diese Studie zeigt, dass bestehende Lösungen schlecht auf den Fall von HVDC-Leitungen zugeschnitten sind und dass ein neues, ausgeklügelteres Überwachungssystem eine Vielzahl von unterschiedlichen Problemen angehen muss. Zunächst wird ein Überblick über die Aufgabe und die Hauptfunktionsblöcke des Überwachungssystems gegeben. Anschließend werden ausgewählte Blöcke in den folgenden Kapiteln detailliert untersucht. Der erste dieser Blöcke, ein Hochfrequenz-Stromtransformator, ist dafür verantwortlich, das Signal in der Stromleitung zu erfassen und an die Elektronik weiterzuleiten. Diese Komponente erhält eine ausführliche Behandlung: allgemeine Designüberlegungen, Berechnung der Streuinduktivität, Betrieb in Anwesenheit eines Leistungsstroms, Resonanzverhalten, ausgewogenes Design. Besonderes Augenmerk wird auf die Anwendung der Finite-Elemente-Analyse (FEA) in Bezug auf den Hochfrequenz-Stromtransformator (HFCT) gelegt. Die vorgestellten Techniken können jedoch auch auf andere magnetische Geräte angewendet werden. Der letzte Abschnitt des Kapitels präsentiert verschiedene Entwicklungsstufen, experimentelle Aufbauten, Prototypmodelle und das endgültige Gerät, das in Serienproduktion gegangen ist. Der nächste Block befasst sich mit dem Problem der Signalextraktion aus dem Rauschen. Es wird eine Literaturanalyse durchgeführt, die sich auf die Rauschunterdrückung in Teilentladungsdaten bezieht, und die Anwendung des Signalabtrennungsansatzes basierend auf der linearen prädiktiven Codierung wird gezeigt. Im Abschnitt über die Lokalisierung werden Beispiele für Probleme vorgestellt, die bei der Entwicklung eines Algorithmus zur Lokalisierung von Teilentladungen aufgetreten sind. In dem Kapitel, das den Labortests gewidmet ist, werden verschiedene Hilfsexperimente zusammengefasst, die während der Entwicklung des Systems durchgeführt wurden. Einige davon sind: TDR-basierte Leitungscharakterisierung, Schätzung der Überwachungsempfindlichkeit, Messung der Kabeldämpfung und der Reflexionskoeffizienten der Zubehörteile. Im abschließenden Kapitel - den Feldtests - wird die Installation des Systems auf einer 110-kV-Leitung und die gemessene Übertragungsfunktion vorgestellt. N2 - Increasing utilization of HV power cable lines, and particularly the advent of long HVDC underground links, results in the need to sensitively monitor their condition, such as by tracking the emergence and development of partial discharges. This study demonstrates that existing solutions are poorly suited to the case of HVDC lines, and that a new, more sophisticated monitoring system needs to address a wide array of diverse problems. First of all, the overview of the task and main functional blocks of the monitoring system is given. Following this, selected blocks are subject to detailed examination in subsequent chapters. The first of these blocks, a high-frequency current transformer (HFCT), is responsible for capturing the signal in the power line and transferring it to the electronics. This component receives in-depth coverage: general design considerations, computation of leakage inductance, operation in presence of a power current, resonant behavior, balanced design. Particular attention is given to the application of Finite Element Analysis (FEA) in relation to the HFCT, however, the demonstrated techniques can also be applied to other magnetic devices. Last section of the chapter presents various stages of development, experimental setups, prototypes, and the final device which has been put into series production. The next block addresses extraction of signals from noise. A literature analysis is conducted concerning noise suppression in partial discharge recordings, and the application of the signal separation approach based on Linear Predictive Coding is shown. In the section on localization, examples illustrating problems encountered during the development of a partial discharge localization algorithm are presented. In the chapter devoted to laboratory tests, various auxiliary experiments conducted during the system's development are compiled, where some of them are: Time Domain Reflectometry (TDR) TDR-based line characterization, estimation of monitoring sensitivity, measurement of the cable attenuation and reflection coefficients of the accessories. In the final chapter – field tests – the installation of the system on a 110 kV line and the measured transfer function are demonstrated. KW - High-frequency current transformer KW - Partial discharge KW - High voltage direct current KW - Underground cable KW - Finite element analysis KW - Stromwandler KW - Teilentladungen KW - Hochspannungs-Gleichstrom-Übertragung KW - Erdkabel KW - Finite-Elemente-Methode KW - Erdkabel KW - Hochspannungskabel KW - Hochspannungsgleichstromübertragung KW - Stromwandler KW - Finite-Elemente-Methode KW - Teilentladung Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-66294 ER - TY - CHAP ED - Schwarz, Harald ED - Janik, Przemysław ED - Gono, Radomir ED - Lehmann, Dirk T1 - 20th EEEIC International Conference on Environment and Electrical Engineering – Student Edition : Wrocław - Ostrava - Cottbus, May 2021 N2 - In the time of increased awareness about the environment problems by the public opinion and also intensive international efforts to reduce emissions of greenhouse gases, as well increase of the generation of electrical energy to facilitate industrial growth, the conference offers broad contribution towards achieving the goals of diversification and sustainable development. Focus of the student conference is to promote the discussion of views from scientists and students from Wroclaw University of Technology, Technical University of Ostrava and Brandenburg University of Technology Cottbus-Senftenberg. The conference is a unique teaching session motivating the students to write science related papers, prepare presentations and discus future developments. It is a formal part of the curriculum offered as an elective module. Accompanied by a technical excursion. KW - Energiequalität KW - Elektrische Energie KW - Energietechnik KW - Energievorrat KW - Umweltbezogenes Management KW - Energieressourcen KW - Energietechnik KW - Energiewende KW - Umweltmanagement KW - Energy resources KW - Energy system transformation KW - Environmental management KW - Power quality Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-56571 SN - 978-3-940471-66-6 ER - TY - THES A1 - Shalaginov, Ievgen T1 - Eine praktische Anwendung von netzautarken Erzeugungsanlagen auf Basis Erneuerbarer Energien und Strom- und Wärmespeicher für kleine Siedlungen T1 - Practical application of grid-independent power plants, using renewable energy sources in a combination with electrical and heat storage facilities, for small settlements N2 - In dieser Arbeit wurde demonstriert, dass der Umstieg von konventionellen Methoden der Energieerzeugung auf modernere Konzepte möglich ist, die eine hohe Versorgungssicherheit und Zuverlässigkeit aufweisen, wirtschaftlich zu betreiben und dabei wesentlich umwelt- und klimafreundlicher sind. In diesem Konzept wurden verschiedene erneuerbare Technologien der Energieerzeugung einbezogen, um eine sichere und zuverlässige Energieeinspeisung zu gewährleisten, ohne dass die Notwendigkeit der Anbindung an ein Übertragungsnetz besteht. Zentraler Bestandteil des Konzepts ist es, elektrische Energie in chemisch gebundener Form (Wasserstoff) zu speichern und bei Bedarf jederzeit in elektrische und thermische Energie umzuwandeln. Dadurch kann in dieser Anlage eine effiziente Energieerzeugung erfolgen. Die Anwendung von Wasserstoff als Sekundärenergieträger ist vielversprechend und erlaubt ein „Energie nach dem Bedarf“-Konzept anzuwenden, um die Energie effizient und wirtschaftlich zum Verbraucher liefern. Der Wirkungsgrad des Gesamtsystems kann mit ca. 60% elektrisch und 85% thermisch angesetzt werden (wobei der Wirkungsgrad bei Anlagen mit größeren installierten elektrischen Leistungen ab 10 MW weiter ansteigt). Damit ist es eine gute Alternative zu konventionellen Arten der Energieerzeugung. Der modulare Aufbau und der geringe Platzbedarf erlauben es, die autarke EE-Anlage in der Nähe der Verbraucher (Stadt, Siedlung) einzurichten. Selbstverständlich sind noch umfangreiche Forschungen notwendig, um das gesamte Energieversorgungssystem mit der Transport- und Verteilungstechnologie zu erfassen. N2 - This work shows that transfer from conventional energy production to modern concepts is possible. Such concepts have high supply security and reliability, are economic in exploitation as well as are more environmentally and climate friendly. The concept described in this work involves various technologies of renewable energy production, in order to ensure secure energy supply without the need of connection to the main distribution network. The central process of the concept is the conversion of electrical energy into chemical (hydrogen), which can be saved and on demand converted back into electrical or thermal energy. This allows efficient energy production in the developed power plant. Implementation of hydrogen as a secondary energy source is very promising and allows to use the energy on the principle “energy upon demand” in order to be able to supply energy to the user efficiently and economically. The efficiency of the whole plant can reach ca. 60% of electric and 85% of thermal energy (though the efficiency of the power plants with more than 10 MW of the installed electrical capacity can be further increased). Therefore it is a good alternative to the conventional types of energy production. The modular construction of the power plant and the small space requirement allows the construction of such renewable energy power plants near the consumers (cities, towns). Further research is needed in order to investigate the overall energy production system in a combination with the transportation and distribution technologies. KW - Regenerative Energie KW - Kleinstadt KW - Energieversorgung KW - Erneuerbare Energien KW - Netzautark KW - Kraftwerke KW - Renewable energies KW - Grid-independent KW - Power plants Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-32468 ER - TY - CHAP ED - Schwarz, Harald ED - Janik, Przemyslaw ED - Gono, Radomir ED - Lehmann, Dirk T1 - 19th EEEIC International Conference on Environment and Electrical Engineering – Student Edition : Cottbus-Ostrava-Wrocław, June 2020 N2 - In the time of increased awareness about the environment problems by the public opinion and also intensive international efforts to reduce emissions of greenhouse gases, as well increase of the generation of electrical energy to facilitate industrial growth, the conference offers broad contribution towards achieving the goals of diversification and sustainable development. Focus of the student conference is to promote the discussion of views from scientists and students from Wroclaw University of Technology, Technical University of Ostrava and Brandenburg University of Technology Cottbus-Senftenberg. The conference offers prominent academics and industrial practitioners from all over the world the forum for discussion about the future of electrical energy and environmental issues and presents a base for identifying directions for continuation of research. KW - Energy resources KW - Energy system transformation KW - Elektrische Energie KW - Energietechnik KW - Energievorrat KW - Umweltbezogenes Management KW - Environmental management KW - Power quality KW - Energiequalität KW - Energieressourcen KW - Energietechnik KW - Energiewende KW - Umweltmanagement Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-57157 ER - TY - CHAP ED - Schwarz, Harald ED - Janik, Przemyslaw ED - Gono, Radomir ED - Lehmann, Dirk T1 - 16th EEEIC International Conference on Environment and Electrical Engineering – Student Edition : Wrocław-Ostrava-Cottbus 19th – 23th of June 2017 N2 - In the time of increased awareness about the environment problems by the public opinion and also intensive international efforts to reduce emissions of greenhouse gases, as well increase of the generation of electrical energy to facilitate industrial growth, the conference offers broad contribution towards achieving the goals of diversification and sustainable development. Focus of the student conference is to promote the discussion of views from scientists and students from Wroclaw University of Technology, Technical University of Ostrava and Brandenburg University of Technology Cottbus-Senftenberg. The conference offers prominent academics and industrial practitioners from all over the world the forum for discussion about the future of electrical energy and environmental issues and presents a base for identifying directions for continuation of research. KW - Energy resources KW - Energy system transformation KW - Elektrische Energie KW - Energietechnik KW - Energievorrat KW - Umweltbezogenes Management KW - Environmental management KW - Power quality KW - Energiequalität KW - Energieressourcen KW - Energietechnik KW - Energiewende KW - Umweltmanagement Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-57121 ER - TY - CHAP ED - Schwarz, Harald ED - Janik, Przemyslaw ED - Gono, Radomir ED - Lehmann, Dirk T1 - 15th EEEIC International Conference on Environment and Electrical Engineering – Student Edition : Wrocław-Ostrava-Cottbus 20th – 24th of June 2016 N2 - In the time of increased awareness about the environment problems by the public opinion and also intensive international efforts to reduce emissions of greenhouse gases, as well increase of the generation of electrical energy to facilitate industrial growth, the conference offers broad contribution towards achieving the goals of diversification and sustainable development. Focus of the student conference is to promote the discussion of views from scientists and students from Wroclaw University of Technology, Technical University of Ostrava and Brandenburg Technical University of Cottbus. The conference offers prominent academics and industrial practitioners from all over the world the forum for discussion about the future of electrical energy and environmental issues and presents a base for identifying directions for continuation of research. KW - Energiequalität KW - Elektrische Energie KW - Energietechnik KW - Energievorrat KW - Umweltbezogenes Management KW - Energieressourcen KW - Energietechnik KW - Energiewende KW - Umweltmanagement KW - Energy resources KW - Energy system transformation KW - Environmental management KW - Power quality Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-56798 SN - 978-3-940471-37-6 ER - TY - CHAP ED - Schwarz, Harald ED - Janik, Przemysław ED - Gono, Radomir ED - Lehmann, Dirk T1 - 22nd EEEIC International Conference on Environment and Electrical Engineering – Student Edition : Wrocław - Ostrava - Cottbus, June 2023 N2 - In the time of increased awareness about the environment problems by the public opinion and also intensive international efforts to reduce emissions of greenhouse gases, as well increase of the generation of electrical energy to facilitate industrial growth, the conference offers broad contribution towards achieving the goals of diversification and sustainable development. Focus of the student conference is to promote the discussion of views from scientists and students from Wroclaw University of Technology, Technical University of Ostrava and Brandenburg University of Technology Cottbus-Senftenberg. The conference is a unique teaching session motivating the students to write science related papers, prepare presentations and discus future developments. It is a formal part of the curriculum offered as an elective module, accompanied by a technical excursion. KW - Power quality KW - Elektrische Energie KW - Energietechnik KW - Energievorrat KW - Umweltbezogenes Management KW - Energy ressources KW - Energy system transformation KW - Environmental management KW - Energiequalität KW - Energieressourcen KW - Energietechnik KW - Energiewende KW - Umweltmanagement Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-64732 ER - TY - THES A1 - Kuprat, Mark Sebastian T1 - The potential of renewable energy sources and integrated energy in the ENTSO-E : a techno-economic potential analysis within an energy balance assessment T1 - Das Potential der erneuerbaren Energien und integrierter Energiesysteme im Verband der Europäischen Übertragungsnetzbetreiber - ENTSO-E : eine techno-ökonomische Potentialanalyse im Rahmen einer energiebilanziellen Bewertung N2 - This analysis aims at the investigation of the techno-economic RES potentials and to minimize GHG emissions in the ENTSO-E. The ENTSO-E represents one of the world’s largest economic regions with a GDP of 19,835 billion US dollar (23%) and a primary energy consumption of 29,705 TWh (18%). ENTSO-E is coined with high degrees of fossil energy dependencies (49.9%) from third-party countries and contributes 3,517 Mt CO2eq (9%) to global GHG emissions. The Primary Sources onshore wind, offshore wind, utility-scale PV, and CSP techno-economic potentials are assessed via GIS-based georeferenced spatial analysis. Solar rooftop potentials are calculated based on a per capita approach. The Secondary Sources bioenergy, hydropower, geothermal, and hydrokinetic energy potentials are approximated based on meta-analysis. Primary and Secondary Sources potentials are input into the IES linear optimization model to simulate an energy system with high shares of RES and PTX. It is found that RES-based primary energy production potentials account for 13,492 TWh and energy dependency could be reduced by 6,482 TWh to 20.5%. Compared to the base year 1990, the direct GHG emission reduction amounts to 3,246 Mt CO2eq (70.7%). This reduction does not correspond with the EU reduction target of 80–95%. Hence, RES-based fuel imports, such as synthetic fuels and hydrogen, from third-party countries become necessary, to substitute fossil fuels and reduce domestic emissions. Additional GHG reduction potentials are suspected in the indirect emission sectors agriculture and waste management. In reference to the Sankey methodology, the analysis entails comprehensive energy flow balances for the ENTSO-E 2016 and 2050 energy systems. The ENTSO-E member countries exhibit heterogeneous properties regarding RES potentials, GHG emissions, and energy dependencies, and, hence, must be assessed individually. Integrated energy systems with high shares of RES and PTX represent a promising means to decrease direct energy use and non-energy use emissions as well as energy dependencies significantly. N2 - Die vorliegende Arbeit zielt auf die Untersuchung der techno-ökonomischen Potentiale der erneuerbaren Energien und die Minimierung der Treibhausgasemissionen im Verband der Europäischen Übertragungsnetzbetreiber (ENTSO-E) ab. Mit einem BIP von 19.835 Milliarden US-Dollar (23%) und einem Primärenergieverbrauch von 29.705 TWh (18%) repräsentiert ENTSO-E eine der größten Wirtschaftsregionen der Welt. ENTSO-E ist dabei durch eine hohe Energieimportabhängigkeit von fossilen Energieträgern (49,9%) aus Drittländern geprägt und trägt 3.517 Mt CO2eq (9%) zu den globalen Treibhausgasemissionen bei. Die techno-ökonomischen Potentiale der Primärquellen Onshore-Wind, Offshore-Wind, PV und CSP wurden mittels GIS-basierter und georeferenzierter Analyse ermittelt. Die Potentiale von Solardächern wurden auf der Grundlage eines Pro-Kopf-Ansatzes berechnet. Die Potentiale der Sekundärquellen Bioenergie, Wasserkraft, Geothermie und Hydrokinetik wurden auf der Grundlage einer Meta-Analyse ermittelt. Die Potentiale der Primärquellen und Sekundärquellen wurden anschließend als Input für das lineare IES-Optimierungsmodell genutzt, um ein Energiesystem mit einem hohen Anteil an erneuerbaren Energien und PTX zu simulieren. Es wurde festgestellt, dass sich das Potential der Primärquellen auf 13.492 TWh beläuft und die Energieimportabhängigkeit um 6.482 TWh auf 20,5% reduziert werden konnte. Im Vergleich zum Basisjahr 1990 umfasst die Reduzierung der Treibhausgasemissionen 3.246 Mt CO2eq (70,7%). Diese Verringerung entspricht nicht dem EU-Reduktionsziel von 80-95%. Daher werden auf erneuerbaren Energieträgern basierende Kraftstoffimporte, wie bspw. synthetische Kraftstoffe und Wasserstoff, aus Drittländern erforderlich, um die fossilen Kraftstoffimporte zu ersetzen und die inländischen Emissionen zu verringern. Zusätzliche Treibhausgasminderungspotentiale werden in den indirekten Emissionssektoren Landwirtschaft und Abfallwirtschaft vermutet. In Anlehnung an die Sankey-Methodik beinhaltet die Arbeit umfassende Energieflussbilanzen für die ENTSO-E Energiesysteme 2016 und 2050. Die ENTSO-E Mitgliedsländer weisen dabei heterogene Eigenschaften in Bezug auf die spezifischen EE-Potentiale, THG-Emissionen und Energieimportabhängigkeiten auf und müssen daher individuell bewertet werden. Als Ergebnis stellen integrierte Energiesysteme mit einem hohen Anteil an erneuerbaren Energien und PTX ein vielversprechendes Mittel dar, um die energetischen und nichtenergetischen Emissionen sowie die Energieimportabhängigkeiten signifikant zu verringern. KW - ENTSO-E KW - RES KW - PTX KW - GIS KW - GAMS KW - EE-Potentiale KW - Sektorenkopplung KW - Europa KW - Energiebilanzen KW - Sankey KW - Europa KW - Energiebilanz KW - Erneuerbare Energien KW - Übertragungsnetz Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-61397 ER - TY - CHAP ED - Schwarz, Harald ED - Janik, Przemyslaw ED - Gono, Radomir ED - Lehmann, Dirk T1 - 17th EEEIC International Conference on Environment and Electrical Engineering – Student Edition : Ostrava-Wrocław-Cottbus 11th – 16th of June 2018 N2 - In the time of increased awareness about the environment problems by the public opinion and also intensive international efforts to reduce emissions of greenhouse gases, as well increase of the generation of electrical energy to facilitate industrial growth, the conference offers broad contribution towards achieving the goals of diversification and sustainable development. Focus of the student conference is to promote the discussion of views from scientists and students from Wroclaw University of Technology, Technical University of Ostrava and Brandenburg University of Technology Cottbus-Senftenberg. The conference offers prominent academics and industrial practitioners from all over the world the forum for discussion about the future of electrical energy and environmental issues and presents a base for identifying directions for continuation of research. KW - Energy resources KW - Energy system transformation KW - Elektrische Energie KW - Energietechnik KW - Energievorrat KW - Umweltbezogenes Management KW - Environmental management KW - Power quality KW - Energiequalität KW - Energieressourcen KW - Energietechnik KW - Energiewende KW - Umweltmanagement Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-57139 ER - TY - CHAP ED - Schwarz, Harald ED - Janik, Przemysław ED - Gono, Radomir ED - Lehmann, Dirk T1 - 17th EEEIC International Conference on Environment and Electrical Engineering – Student Edition : Ostrava-Wrocław-Cottbus 11th – 16th of June 2018 N2 - In the time of increased awareness about the environment problems by the public opinion and also intensive international efforts to reduce emissions of greenhouse gases, as well increase of the generation of electrical energy to facilitate industrial growth, the conference offers broad contribution towards achieving the goals of diversification and sustainable development. Focus of the student conference is to promote the discussion of views from scientists and students from Wroclaw University of Technology, Technical University of Ostrava and Brandenburg University of Technology Cottbus-Senftenberg. The conference offers prominent academics and industrial practitioners from all over the world the forum for discussion about the future of electrical energy and environmental issues and presents a base for identifying directions for continuation of research. KW - Energiequalität KW - Elektrische Energie KW - Umweltbezogenes Management KW - Energietechnik KW - Energievorrat KW - Umweltmanagement KW - Energiewende KW - Energietechnik KW - Energieressourcen KW - Energy resources KW - Power quality KW - Environmental management KW - Energy system transformation Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-51579 SN - 978-3-940471-49-9 ER - TY - THES A1 - Buckow, Benjamin T1 - Entwicklung von Modellen und Methoden zur Qualifizierung für die Netzbetriebsführung unter Einbeziehung eines neuartigen dynamischen Netzsimulators T1 - Development of models and methods for qualification of Dispatchers using a new dynamic power system simulator N2 - Das elektrische Energieversorgungssystem in Europa, insbesondere in Deutschland, unterliegt vor allem seit der Verabschiedung des Erneuerbare-Energien-Gesetzes im Jahre 2000 enormen Veränderungen. Die über viele Jahre gewachsene Struktur einer zentralen Energieeinspeisung durch konventionelle Kraftwerke löst sich zunehmend auf, getrieben durch den Ausstieg aus der Atom- sowie der Kohleenergie und es bildet sich ein dezentrales Energieversorgungsnetz, welches durch die Energieerzeugung aus erneuerbare Energien, allen voran Windenergie- und Photovoltaikanlagen, geprägt ist. Wesentliche Gründe dieser Veränderungen sind politische und regulatorische Rahmenbedingungen sowie der technische Fortschritt im Bereich der Erzeugung, Verbrauch und Übertragung von Energie. Durch diese Wandlung des Energieversorgungssystems werden die Netzbetriebsführer zunehmend vor kritische Situationen gestellt, da die fluktuierende Einspeisung der erneuerbaren Energien nicht präzise vorhergesagt werden kann und somit Einspeisung und Verbrauch nicht mehr im Gleichgewicht sind. Dieses Defizit erreicht vermehrt eine Größenordnung, die durch Regelleistung nicht mehr ausgeregelt werden kann und ein Eingreifen der Netzbetriebsführer in das Energieübertragungsnetz nach sich zieht. Damit diese kritischen Situationen von den Netzbetriebsführern zu jeder Zeit beherrscht werden können, ist es nötig, das Personal für solche Szenarien zu qualifizieren. Dabei bedarf es Forschungsarbeit, um diese Qualifizierung an Simulator gestützten Schulungen mit geeigneten Netzmodellen und Szenarien sicherzustellen. Dabei muss die Interaktion und Kommunikation zwischen den Netzbetriebsführern zentraler Bestandteil einer solchen Schulung sein. Insbesondere bei Netzwiederaufbau Szenarien ist die Einhaltung einer präzisen Kommunikation unter Berücksichtigung von Meldeketten und Weisungsberechtigungen. In dieser Arbeit wird solche eine Schulung unter Anwendung didaktischer Methoden ausarbeitet sowie Netzmodelle entwickelt, welche die Grundlage sind, um an einem solchen dynamischen Netzsimulationssystem Netzbetriebsschulungen durchzuführen. Darüber hinaus werden verschiedene Szenarien erstellt, um die unterschiedlichsten Aspekte der Netzbetriebsführung unter Einbeziehung von Netzbetriebsführern, Studierenden und Meister zu schulen. N2 - The electrical energy supply system in Europe, especially in Germany, is subjected to enormous changes, especially after enactment of the Renewable Energy Sources Act in 2000. The structure of a central energy supply system through conventional power plants, which has grown over many years, is fading away, driven by the phase-out of nuclear and coal power plants. Furthermore, a decentralized energy supply structure is getting formed, which is characterized by generation from renewable energies, especially from wind and photovoltaic technologies. The main reasons for these changes are the political and regulatory framework as well as technical progress in the area of generation, consumption and transmission of energy. This change in the energy supply system means that dispatchers are faced with increasing critical situations, since the fluctuating feed-in of renewable energies cannot be predicted precisely and thus feed-in and consumption are no longer in balance. This deficit is increasingly reaching an order of magnitude that can no longer be compensated by balancing power and requires dispatchers’ interventions in electrical transmission grid. In order to overcome these critical situations at all times, it is necessary to qualify the dispatching staff for such scenarios. Research and development is also required to endorse the qualification of dispatching staffs on simulator-based training courses with suitable grid models and scenarios. The interaction and communication between the dispatchers must be a central component of such training programs. Particularly in grid restoration scenarios, compliance with precise communication, taking account of message chains and authorization to issue instructions play crucial roles. In this dissertation, such a training program is developed using didactic methods. Moreover, different network models are developed as building components of grid operation training on a dynamic power system simulator. In addition, various scenarios are created in order to train the most diverse aspects of grid operation management which contains training programs for dispatchers, students and certified electrical staffs. KW - Netzbetrieb KW - Trainingssimulator KW - Schulung KW - Grid operation KW - Training simulator KW - Training KW - Elektrizitätsversorgung KW - Management KW - Qualifikation KW - Simulation Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-52267 ER - TY - THES A1 - Blasius, Erik T1 - Ein Beitrag zur Netzintegration von Elektrofahrzeugen als steuerbare Lasten und mobile Speicher durch einen Aggregator T1 - A contribution to the grid integration of electric vehicles as flexible loads and mobile storages through an aggregator N2 - Der stete Zuwachs des Erzeugungsleistungs- und Energieaufkommens aus erneuerbaren Energien (EE) wirkt sich immer deutlicher auf die elektrischen Energieversorgungsnetze aus. Die Folge: Hohe Leistungsgradienten der Erzeugung und kritische Auslastungsgrade der Übertragungs- und Verteilnetze. Räumlich verteilte Energiespeicher können helfen, die EE besser zu integrieren und resultierende negative Effekte zu egalisieren. Der durch die Bundesregierung proklamierte Entwicklungsplan der sog. Energiewende fordert eine deutliche Zunahme des Anteils der EE und der Elektromobilität. Diese auch zukünftig gewünschte Entwicklung könnte die gegenwärtig betriebenen Energieversorgungsnetze weiter stärker belasten. Die vorliegende Arbeit bietet einen möglichen Lösungsbeitrag der Elektrofahrzeuge als Speichertechnologie für die Bewältigung der Herausforderung der netzverträglichen Integration von EE und Elektromobilität. Hierzu wird ein Konzept zur Einbindung mobiler Speicher (Elektrofahrzeuge mit V2G-Fähigkeit) vorgestellt. Dieses Konzept wird in einem Reallabor an der Brandenburgischen Technischen Universität Cottbus-Senftenberg evaluiert. Insbesondere die Informations- und Kommunikationstechnologie zwischen Elektrofahrzeug, Ladesäule und einem Aggregator wird eingehend betrachtet, denn sie bildet einen Grundpfeiler der Nutzbarmachung mobiler Speicher. Hinsichtlich der eingesetzten prozessualen Intelligenz zur Bewältigung nötiger Verfahren und Methoden werden ein Lademanagementsystem für die Ladesäulen und ein Energiemanagementsystem für den Aggregator eingeführt. Beide lassen die externe Verwaltung der Prozesse durch einen Betreiber zu. Es folgt eine Untersuchung der empirischen Verfügbarkeit der Elektrofahrzeugflotte während eines mehrmonatigen Betrachtungszeitraumes. Die Auswertung und Analyse dieser Verfügbarkeit liefert konkrete Ergebnisse hinsichtlich einer Abschätzung zukünftiger Nutzungspotentiale eines mobilen Speichers. Abschließend werden zu erwartende Auswirkungen der Nutzung der mobilen Speicher auf die kalendarische sowie zyklische Alterung der Traktionsbatterie diskutiert. N2 - The constant growth of power generation and power supply capacities from renewable energies (EE) leads to more and more distinctive effects on the power system. The consequences are a high range of the level of efficiency concerning the generation and the critical degrees of utilization of the distribution and transmission network. Spatially distributed energy storage can be useful to integrate the EE even better and to equalize the resulting negative effects of the EE-facilities. The federal government proclaims and postulates in the so-called Energiewende a significant increase in EE and in electric mobility. Thus may strain the currently used electric energy networks even further. This paper offers a possible approach to solve the dilemma by using electrically powered vehicles as a storage technology in order to accomplish the challenge of a network-compatible integration of EE and electric mobility. Therefore, a concept will be presented to integrate mobile storage devices (electric vehicles with V2G-capability). This concept will be evaluated in a field laboratory at the BTU-Cottbus-Senftenberg. Especially the information and communication technology (ICT) between electric vehicle, charging station and aggregator will be thoroughly observed. The ICT generates the keystone in the utilization of mobile storages. Regarding the applied processual intelligence to accomplish necessary methods and techniques, a charging management system for charging stations and an energy management system for the aggregator will be introduced. Both of them allow the external administration of the processes through an operator. Continuing with an empirical analysis concerning the availability of the electric vehicle fleet during a period of several months. This survey provides precise results concerning the estimation of future utilization potentials of mobile storage devices. As a last point, there will be an examination of the anticipated effects relating to the usage of mobile storage considering the calendric and cyclic ageing. KW - Elektrofahrzeug KW - Aggregator KW - Netzintegration KW - Mobiler Speicher KW - Steuerbare Last KW - Electric vehicle KW - Aggregator KW - Grid integration KW - V2G KW - Flexible load KW - Elektrofahrzeug KW - Netzrückwirkung KW - Dezentrale Energiespeicherung Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-38594 ER - TY - CHAP ED - Schwarz, Harald ED - Janik, Przemysław ED - Gono, Radomir ED - Lehmann, Dirk T1 - 16th EEEIC International Conference on Environment and Electrical Engineering – Student Edition : Wrocław-Ostrava-Cottbus 19th – 23th of June 2017 N2 - In the time of increased awareness about the environment problems by the public opinion and also intensive international efforts to reduce emissions of greenhouse gases, as well increase of the generation of electrical energy to facilitate industrial growth, the conference offers broad contribution towards achieving the goals of diversification and sustainable development. Focus of the student conference is to promote the discussion of views from scientists and students from Wroclaw University of Technology, Technical University of Ostrava and Brandenburg University of Technology Cottbus-Senftenberg. The conference offers prominent academics and industrial practitioners from all over the world the forum for discussion about the future of electrical energy and environmental issues and presents a base for identifying directions for continuation of research. KW - Energiequalität KW - Elektrische Energie KW - Energietechnik KW - Energievorrat KW - Umweltbezogenes Management KW - Umweltmanagement KW - Energiewende KW - Energietechnik KW - Energieressourcen KW - Power quality KW - Environmental management KW - Energy system transformation KW - Energy resources Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-51550 SN - 978-3-940471-48-2 ER - TY - CHAP ED - Schwarz, Harald ED - Janik, Przemysław ED - Gono, Radomir ED - Lehmann, Dirk T1 - 18th EEEIC International Conference on Environment and Electrical Engineering – Student Edition : Cottbus Ostrava-Wrocław 11th – 14th of June 2019 N2 - In the time of increased awareness about the environment problems by the public opinion and also intensive international efforts to reduce emissions of greenhouse gases, as well increase of the generation of electrical energy to facilitate industrial growth, the conference offers broad contribution towards achieving the goals of diversification and sustainable development. Focus of the student conference is to promote the discussion of views from scientists and students from Wroclaw University of Technology, Technical University of Ostrava and Brandenburg University of Technology Cottbus-Senftenberg. The conference offers prominent academics and industrial practitioners from all over the world the forum for discussion about the future of electrical energy and environmental issues and presents a base for identifying directions for continuation of research. KW - Energy resources KW - Environmental management KW - Power quality KW - Energy system transformation KW - Energieressourcen KW - Energiewende KW - Umweltmanagement KW - Energietechnik KW - Energiequalität KW - Umweltbezogenes Management KW - Energievorrat KW - Elektrische Energie KW - Energietechnik Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-51660 SN - 978-3-940471-50-5 ER - TY - THES A1 - Samborsky, Michael T1 - Conceptual aspects of future High Voltage Direct Current (HVDC) electrical power transmission networks T1 - Konzeptionelle Aspekte für ein kommendes Hochspannungs-Gleichstrom-Übertragungsnetz (HGÜ) N2 - A continually growing demand for reliable energy supply makes existing power systems more heavily loaded and evokes engineers and experts to look for feasible immediate solutions in power energy transmission. One of these solutions might be a bulk power transmission network at extra high voltages based on direct current. Currently, high voltage direct current (HV DC) transmission has been only realized in point-to-point systems and back-to-back arrangements. Thus, the next logical step in this development would be an HV DC network. In principle, it might have certain advantages over a conventional high voltage AC system, as it could be less closely meshed covering larger areas and transmit higher electric power with lower losses. However, no well-grounded investigations concerning possible layout and operation of an HV DC network are publicly available. Experience from the HV DC lines does not allow to make substantial conclusions regarding the requirements for an HV DC network. Therefore, some basic questions on the operation of an HV DC network need to be answered mainly from systems simulations. N2 - Die ständig wachsende Nachfrage nach zuverlässiger Energieversorgung verursacht eine höhere Belastung vorhandener Energiesysteme und veranlasst Ingenieure und Experten, nach machbaren Lösungen in Energieübertragungssystemen zu suchen. Eine dieser Lösungen könnte ein leistungsstarkes Übertragungsnetz bei hohen Spannungen auf der Basis von Gleichstrom sein. Hochspannungs-Gleichstrom-Übertragungen (HGÜ) werden bislang nur als Punkt-zu-Punkt-Systeme und als Kurzkupplungen ausgeführt. Prinzipiell würde jedoch ein HGÜ Netz wesentliche Vorteile gegenüber einem Hochspannungs-Drehstromnetz bieten, da es weiträumiger gespannt und für die Übertragung höherer elektrischer Leistungen geeignet sein könnte. Grundlegende Untersuchungen für die Gestaltung und den Betrieb eines HGÜ-Netzes liegen jedoch nicht vor. Erfahrungen aus dem Betrieb der HGÜ-Leitungsverbindungen ermöglichen keine wesentlichen Schlüsse auf die Erfordernisse eines Gleichspannungsnetzes. Daher sind im Rahmen einer Netzsimulation im HGÜ-Netzbetrieb voraussichtlich auftretende Fragestellungen zu klären. KW - HVDC KW - Power transmission KW - Transient process KW - Energy system KW - High voltage KW - HGÜ KW - Energieübertragung KW - Übergangsprozess KW - Energiesystem KW - Hochspannung KW - Elektrisches Energiesystem KW - Hochspannungsgleichstromübertragung Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-43658 ER - TY - THES A1 - Fenske, Stefan T1 - Ermittlung des Schaltvermögens von Hochspannungs-Leistungsschaltern beim Auftreten generatornaher Kurzschlussströme mit ausbleibenden Nulldurchgängen T1 - Determination of high voltage circuit-breaker breaking capability in case of generator short-circuit currents with delayed zero crossings N2 - Hochspannungs-Leistungsschalter vermögen den Kurzschlussstrom nur in seinem Nulldurchgang zu unterbrechen. Es ist also der jeweilige Fall daraufhin zu untersuchen, ob es bei generatornahen Kurzschlüssen zu Stromnulldurchgängen kommt, oder ob dem Schalter durch externe Maßnahmen die Möglichkeit zur Stromunterbrechung gegeben werden muss. In dieser Arbeit wurde ein Rechenverfahren entwickelt, mit dem bei geringem Aufwand festgestellt werden kann, ob ein gegebener Hochspannungs-Leistungsschalter im vorgegebenen Kreis bei anzugebenden Betriebszuständen einen Kurzschluss mit ausbleibenden Stromnulldurchgängen beherrscht. Das Rechenverfahren wurde mit Hilfe des Netzberechnungsprogramms PowerFactory der Firma DIgSILENT GmbH entwickelt. Es beinhaltet ein neues dreiphasiges Leistungsschaltermodell, dass das Ein- und Ausschaltverhalten eines Leistungsschalters simuliert und alle wichtigen die ausbleibenden Stromnulldurchgänge verursachenden Faktoren berücksichtigt. Zudem werden sämtliche auftretenden Generatorbetriebszustände und die das Auftreten von ausbleibenden Stromnulldurchgängen verursachenden worst-case-Szenarien automatisch berechnet. In der Arbeit wurde untersucht, unter welchen Umständen im zeitlichen Verlauf des generatorseitigen Kurzschlussstromes ausbleibende Stromnulldurchgänge auftreten und welche Parameter den größten Einfluss auf den Kurzschlussstromverlauf haben. Zudem wurde die Wahrscheinlichkeit des Auftretens von ausbleibenden Stromnulldurchgängen in Abhängigkeit der genannten Parameter in realen Anwendungen abgeschätzt. Die vorliegende Arbeit ist notwendig, da die zukünftige Entwicklung der Hochspannungs-Leistungsschalter dazu führt, dass die einzelnen Unterbrechereinheiten für eine höhere Bemessungsspannung ausgelegt werden als bisher. Damit sinkt bei höheren Nennspannungen (z.B. > 362 kV) die Zahl der Unterbrechereinheiten pro Schalterpol. Als Folge sinkt auch die Lichtbogenspannung je Schalterpol, und es verringert sich der die Gleichstromzeitkonstante verkürzende Einfluss, so dass gegebenenfalls konstruktive Maßnahmen erforderlich werden. N2 - High-voltage circuit breakers are capable of interrupting the short-circuit current only in its zero crossing. Therefore in the case of short circuits close to generators it has to be determined whether and when there are current zero crossings, or whether the circuit breaker must be given the possibility of current interruption by external measures. In this work a computational procedure was developed. It can be determined with little effort whether a given high-voltage circuit breaker in a given circuit under predetermined operating conditions can control a short-circuit current with absence of zero crossings. As a result it is possible to make statements of the breaking capability of a new high-voltage circuit breaker even during the development. The computational method is based on the network calculation program PowerFactory of the company DIgSILENT GmbH. It includes a new three-phase breaker model that simulates turn-on and turn-off transients and includes the factors which cause the absence of current zero crossings. In addition, all occurring generator operating conditions and the occurrence of absence of current zero crossings that cause worst-case scenarios are automatically calculated. In the study it was investigated, under what generator conditions short-circuit currents with delayed zero crossings may occur and which parameters have the greatest impact on the short-circuit current flow. Moreover, the probability of absence of current zero crossings in dependence on those parameters was estimated in actual applications. This work is a contribution to the future development of high-voltage circuit breakers, as the individual breaker units are designed for a rated voltage higher than before. Consequently at higher voltages (e.g. > 362 kV) the number of breaking units per circuit-breaker pole will decrease. As a result, the arc voltage per circuit-breaker pole will decrease as well, and reduce the d.c. time constant shortening effect. KW - Hochspannungsnetz KW - Leistungsschalter KW - Kurzschlussstrom KW - Schaltverhalten KW - Hochspannungs-Leistungsschalter KW - Ausbleibende Stromnulldurchgänge KW - High voltage circuit-breaker KW - Delayed zero crossings Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus-22148 ER - TY - CHAP ED - Schwarz, Harald ED - Leonowicz, Zbigniew T1 - 8th EEEIC International Workshop on Environment and Electrical Engineering : Karpacz, Poland, 10 - 13. May 2009 N2 - In the time of increased awareness about the environment problems by the public opinion and intensive international effort to reduce emissions of greenhouse gases, as well increase of the generation of electrical energy to facilitate industrial growth, the conference offers broad contribution towards achieving the goals of diversification and sustainable development. The scope of the Conference is to promote a Forum, where people involved with electrical power systems may exchange their experiences and present solutions found for actual and future problems. The conference offers prominent academics and industrial practitioners from all over the world the forum for discussion about the future of electrical energy and environmental issues and presents a base for identifying directions for continuation of research. KW - Umweltbezogenes Management KW - Energievorrat KW - Elektrische Energie KW - Energietechnik KW - Energieressourcen KW - Umweltmanagement KW - Energietechnik KW - Energy resources KW - Environmental management KW - Power quality Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus-7716 SN - 978-3-940471-10-9 ER - TY - CHAP ED - Schwarz, Harald ED - Janik, Przemyslaw ED - Gono, Radomir ED - Lehmann, Dirk T1 - 15th EEEIC International Conference on Environment and Electrical Engineering – Student Edition : Wrocław-Ostrava-Cottbus 20th – 24th of June 2016 N2 - In the time of increased awareness about the environment problems by the public opinion and also intensive international efforts to reduce emissions of greenhouse gases, as well increase of the generation of electrical energy to facilitate industrial growth, the conference offers broad contribution towards achieving the goals of diversification and sustainable development. Focus of the student conference is to promote the discussion of views from scientists and students from Wroclaw University of Technology, Technical University of Ostrava and Brandenburg Technical University of Cottbus. The conference offers prominent academics and industrial practitioners from all over the world the forum for discussion about the future of electrical energy and environmental issues and presents a base for identifying directions for continuation of research. KW - Energy resources KW - Environmental management KW - Power quality KW - Energy system transformation KW - Energieressourcen KW - Energiewende KW - Umweltmanagement KW - Energietechnik KW - Energiequalität KW - Umweltbezogenes Management KW - Energievorrat KW - Elektrische Energie KW - Energietechnik Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-42731 SN - 978-3-940471-37-6 ER - TY - THES A1 - Nanewortor, Xoese Kobla T1 - A concept of renewable energy plant-storage capacity sizing for integration into electrical distribution network T1 - Ein Konzept zur Größenoptimierung der Speicherkapazität von erneuerbaren Energieerzeugungsanlagen zur Integration in das elektrische Verteilnetz N2 - Energy demand of continents, countries, communities and individuals will continue to increase in the phase of increasing population and improvement in the living standards of people. The attempt to meet this ever increasing demand and at the same time protect the environment has resulted in the fast growth of power generation from renewable sources of energy especially from wind through wind power plants and solar through photovoltaic power plants. This growth has been facilitated by various support schemes such as feed-in-tariff scheme, feed-in-premium and quota scheme. Further growth is expected in the future. This is because of the existing support schemes and the expectation of the emergence of improved technologies for harvesting renewable energy. This development of power generation from renewable sources of energy although positive lead to some distinctive negative effects on the existing electrical network to which they are connected. These negative effects are known and well documented. The fluctuating nature of wind and solar radiation at any given location over a given period of observation is seen to translate into the power they feed into the power network. This fluctuating infeed requires more active management of the network by system operators so as to ensure continuous reliable power generation and delivery. Sometimes the management process lead to non-utilization of power produced by the renewables sources. Secondly, expansion and reinforcement of some existing networks are needed in other to accommodate renewable power generators. These come at a cost. Many studies and researches have been dedicated to finding solutions to these issues. This work agrees with the use of storage systems as means of solving these issues but the question that remains unanswered is what the optimal way is. There is also a further push given to the view of installing renewable energy plants together with storage systems as a unit in this work. The main task presented in this work, however, is a concept of sizing renewable energy plant and storage systems as a unit. The resulting renewable energy plant-storage unit has the objective of supporting the electrical network to which it will be connected. Firstly the support should be by reducing the fluctuating effect from renewable production. Secondly by helping improve the load hosting capacity of the electrical network. This will be by supplying the part of the load demand leading to the reduction of the overall power drawn by connected loads from the electrical power network. Historic data of renewable resource and also the load demand at the point or bus of connection are the drivers of this concept. With the earlier mentioned objectives and random or stochastic nature of data involved, particle swarm optimization method is employed in implementing the concept of sizing to arrive at an optimal solution of required sizes of the renewable energy plant-storage system. The concept of sizing is based on proposing an ideal load demand that can be supplied by a utility under normal operating condition at all time. It follows that any extra demand should be supplied by the optimally sized renewable energy plant-storage unit. In this work sizing results of three scenarios presented. A single node network with three different types of the load was used in testing the effect of optimally sized renewable energy plant-storage system on an electrical network. The outcome of this test showed that the optimally sized renewable energy storage-system improved the ability of the test electrical network to support additional load hence load hosting capacity of test network was improved. The process required modelling and simulation all of which were carried out using MATLAB Simulink software. N2 - Der Energiebedarf von Kontinenten, Ländern, Gemeinden und Einzelpersonen wird sich mit wachsender Bevölkerungszahl und steigendem Lebensstandard auch weiterhin erhöhen. Das Vorhaben, dieser ständig zunehmenden Nachfrage gerecht zu werden und zugleich die Umwelt zu schützen, hat zum schnellen Wachstum der Stromerzeugung aus erneuerbaren Energiequellen geführt. Die Nutzung von Windenergie mit Hilfe von Windkraftanlagen und von Solarenergie durch Photovoltaikanlagen ist dabei von besonderer Bedeutung. Dieses Wachstum wurde unterstützt durch verschiedene Förderregelungen wie dem Feed-in tariffs scheme, dem Feed-in Premium und der Quotenregelungen. Für die Zukunft wird eine weitere Steigerung für diesen Bereich prognostiziert. Die bestehenden Förderregelungen und die zu erwartenden Verbesserungen in den Technologien zur Gewinnung erneuerbarer Energie legen dies nahe. Diese generell positive Entwicklung der Stromerzeugung aus erneuerbaren Energiequellen führt jedoch auch zu einigen markanten negativen Auswirkungen auf das bestehende elektrische Netz. Diese negativen Effekte sind bekannt und gut dokumentiert. Durch die über einen bestimmten Beobachtungszeitraum durchgeführte Aufzeichnung der fluktuierenden Charakteristik von Windgeschwindigkeiten und Sonneneinstrahlung kann für einen beliebigen Ort die entsprechende in das Stromnetz eingespeiste Energiemenge bestimmt werden. Diese zeitlich variierende Einspeisung erfordert in höherem Maße eine aktive Überwachung bzw. Steuerung des Netzes durch die Netzbetreiber um die kontinuierliche zuverlässige Stromerzeugung und -lieferung zu gewährleisten. Der Steuerungsprozess führt in einigen Fällen zur Nichtnutzung des durch erneuerbare Energien erzeugten Stroms. Des Weiteren wird die Erweiterung und Verstärkung einiger bestehender Netze benötigt um weitere erneuerbare Energieerzeuger einzubinden. Dieser Ausbau verursacht Kosten. Viele Forschungsstudien arbeiten an den Lösungen für diese Herausforderungen. Das Ergebnis dieser Arbeit bestätigt die Verwendung von Speichersystemen als ein Mittel zur Lösung der aufgeführten Probleme, beantwortet jedoch nicht die Frage nach dem optimalen Weg. Die Installation von Anlagen zur Erzeugung erneuerbarer Energie und deren Kopplung mit Speichersystemen wird in der Arbeit aufgegriffen. Das Hauptaugenmerk liegt hierbei auf einem Konzept zur Dimensionierung der Einheit aus erneuerbaren Energieanlagen und Speichersystemen. Die sich daraus ergebende erneuerbare Energieanlage-Speicher-Einheit hat das Ziel, das mit ihr verbundene Stromnetz zu unterstützen. Dies wird erstens durch die Reduzierung des fluktuierenden Effektes der erneuerbaren Energie-Produktion und zweitens durch die Verbesserung der Netzkapazität erreicht. Dieses geschieht indem ein Teil der benötigten Energiemenge durch angeschlossene Speicher bereitgestellt wird, wodurch der Leistungsbezug aus dem Stromnetz reduziert wird. Historische Daten der erneuerbaren Energiequellen und auch der Energienachfrage an Verbindungspunkten oder –leitungen sind grundlegend für dieses Konzept Mittels den zuvor genannten Angaben und dem Einsatz zufälliger oder stochastischer Daten, sowie der Anwendung der „particle swarm“-Optimierung, welches ein stochastisches Verfahren ist, kann ein Konzept zur Berechnung der optimalen Lösung der erforderlichen Größen des REP-S-System erlangt werden. Das Konzept der Optimierung basiert auf der Annahme eines idealisierten Energiebedarfs unter normalen Betriebsbedingungen. Diese Daten können vom Energieversorger bereitgestellt werden. Weiterer Energiebedarf soll durch die optimale Größe der REP-S-Einheit geliefert werden. In dieser Arbeit werden Sizing-Optimierungs-Ergebnisse von drei Szenarien dargestellt. Ein einzelnes Knotennetz mit drei verschiedenen Arten des Energiebedarfes wurde genutzt um die Wirkung der optimierten Größe des REP-S-System auf ein elektrisches Netz zu prüfen. Das Ergebnis dieses Tests zeigte, dass die optimale Größe des REP-S-Systems die Fähigkeit des Testnetzes zusätzlichen Bedarf zu auszugleichen steigert und somit die Kapazität des Testnetzes verbessert wurde. Unter Verwendung von MATLAB Simulink-Software wurden die für den Prozess notwendigen Simulationen und Modellierungen durchgeführt. KW - Storage sizing KW - Load hosting capacity KW - Particle swam optimization KW - Renewable energy KW - Lastaufnahmekapazität KW - Partikelschwarmoptimierung KW - Windkraftanlage KW - Erneuerbare Energie KW - MATLAB Simulink KW - Elektrizitätsversorgungsnetz KW - Erneuerbare Energien KW - Windkraftwerk KW - Partikel-Schwarm-Optimierung Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-39437 ER - TY - THES A1 - Xu, Ruoyu T1 - Comparison of switching behaviours between vacuum and SF6 technologies at 145kV network T1 - Vergleich der Schaltverhalten zwischen Vakuum und SF6 Technologien beim 145kV-Netz N2 - This PhD project started from one basic question: whether vacuum technology can be applied to 145kV electrical power system networks as a potential substitution to SF6 technology which has been utilised for decades of practice, due to environment and economic concerns. Possible threats and challenges, which might cause problems for the proposed replacement, are identified mainly in three areas: (1) small inductive current switching, (2) capacitive load current switching and (3) short-line fault switching. Three circuit-breaker programming models, therefore, have been developed based on statistic data provided by breaker manufactures: (1) a maximum di/dt fixed model which has been utilised for small inductive current switching tests and capacitive load current de-energising tests; (2) a dynamic di/dt model adopting from Mayr’s classic arc model for SF6 circuit-breakers which has been utilised for short-line fault tests; and (3) a current making model for capacitive load current energising tests. In a general conclusion, vacuum technology shows its superiority in most of the switching duties although in some rare cases, SF6 technology still stands a chance to break it even. But if we take the environment and economic factors into consideration, vacuum is definitely worth investigating in the future market. N2 - Diese Doktorarbeit basiert auf einer grundlegenden Frage: Ob die Vakuum-Schalttechnik als potentieller Ersatz für die in Energieverteilungsnetzen bis 145 kV in jahrzehntelanger Praxis verwendete SF6-Technoligie geeignet ist, da gegen letztere Bedenken bezüglich der Umweltverträglichkeit bestehen. Die potenziellen Probleme für das vorgeschlagene Ersetzen sind vor allem in drei Bereichen identifiziert: (1) Schalten kleiner induktiver Ströme, (2) Schalten kapazitiver Lasten, und (3) Kurzschlüsse auf Freileitungen. Daher wurden drei Programmiermodelle für Leistungsschalter, basierend auf statistischen Angaben von Leistungsschalter-Herstellern, entwickelt: (1) ein auf maximales di/dt festgelegtes Modell, das für das Schalten kleiner induktiver Ströme und das Abschalten kapazitiver Ströme verwendet worden ist; (2) ein dynamisches di/dt-Modell, das vom klassischen Lichtbogenmodell nach Mayr übernommen worden ist; (3) ein Strommodell für das Einschalten kapazitiver Lasten. Daraus resultiert eine allgemeine Schlussfolgerung, dass die Vakuum-Schalttechnik in den meisten Schaltaufgaben überlegen ist. Jedoch hat auch die SF6-Schalttechnologie unter einigen seltenen Umständen eine Chance überlegen zu sein. Aber, wenn wir Umweltprobleme und wirtschaftliche Faktoren berücksichtigen, lohnt es sich auf jeden Fall, die Vakuum-Schalttechnik im Hinblick auf den zukünftigen Markt weiter zu untersuchen. KW - Vacuum KW - SF6 KW - Simulation KW - Aufschlüsselung KW - Vakuum KW - TRV KW - Breakdown KW - High-frequency current quenching KW - Hochspannungsleistungsschalter KW - Vakuumschalter KW - Ausschaltverhalten Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-36693 ER - TY - THES A1 - Amanpour, Saman T1 - A cellular approach to optimize the integration of renewable generation into distribution networks T1 - Ein zellularer Ansatz zur Optimierung der Integration regenerativer Erzeugungen in Verteilnetzen N2 - The steady growth of the renewable-based technologies in the last twenty years has changed the character of the power systems significantly. Until today, there are more than 112 GW installed photovoltaic and wind parks in Germany and around 90% of the installed renewable generators are integrated into distribution networks. As a result, distribution networks are often facing congestion problems and more investments are needed for the required network development plans. The political decisions in Germany for increasing the share of renewables in electricity consumption up to 65% until 2030 and the nuclear phase out until 2022 and further shutdowns of the coal power plants raised serious concerns about the reliability of power supply and feasibility of the transition plan. The present dissertation has a look over the recent developments and offers a methodology for reduction of the resulted costs from further integration of renewable generators into the distribution networks. The suggested methodology is based on a cellular approach and helps also to postpone the unnecessary costly network expansions. Furthermore, it helps to integrate the renewable generators in an optimized way which has an added value to move towards the defined sustainability goals. The proposed methodology has two steps. The first step is made up of the cellular approach and grey wolf optimization in MATLAB environment. In this step, the optimal combination of technologies for fulfillment of the defined goals are found out. The second step consists of the quasi dynamic simulations in PowerFactory environment. In this step, the suggested results from MATLAB optimization are investigated in semi-real situations. With the quasidynamic simulations, it is checked whether the results are tolerable from the point of view of network operation and whether it is possible to facilitate the network operation with certain strategies. N2 - Das stetige Wachstum der auf erneuerbaren Energien basierenden Technologien in den letzten zwanzig Jahren hat den Charakter der Stromsysteme erheblich verändert. Bis heute sind in Deutschland mehr als 112 GW an Photovoltaik- und Windkraftanlagen installiert und rund 90% der installierten erneuerbaren Erzeugungsanlagen sind in die Verteilnetze integriert. Infolgedessen sind die Verteilnetze häufig mit Netzengpässen konfrontiert und es sind mehr Investitionen für die erforderlichen Netzausbaupläne nötig. Die politischen Entscheidungen in Deutschland, den Anteil der erneuerbaren Energien am Stromverbrauch bis 2030 auf 65 % zu erhöhen, den Ausstieg aus der Kernenergie bis 2022 zu vollziehen und weitere Kohlekraftwerke abzuschalten, gaben Anlass zu ernsthaften Bedenken hinsichtlich der Sicherheit der Stromversorgung und der Realisierbarkeit des Übergangsplans der deutschen Energiewende. Die vorliegende Dissertation wirft einen Blick auf die jüngsten Entwicklungen der Stromnetze und bietet eine Methodik zur Reduzierung der Kosten, die durch die weitere Integration erneuerbarer Erzeugungsanlagen in die Verteilnetze entstehen. Die vorgeschlagene Methodik basiert auf einem zellularen Ansatz und verschiebt den unnötigen kostspieligen Ausbau der Stromnetze in die Zukunft. Darüber hinaus hilft sie, die erneuerbaren Erzeugungsanlagen auf eine optimierte Weise in die Stromnetze zu integrieren, was einen Mehrwert für die Erreichung der definierten Nachhaltigkeitsziele darstellt. Die vorgeschlagene Methodik in dieser Dissertation besteht aus zwei Schritten. Der erste Schritt besteht aus dem zellulären Ansatz und der Grey Wolf Optimierung in der MATLAB-Umgebung. In diesem Schritt wird die optimale Kombination von der auf erneuerbaren Energien basierenden Technologien zur Erfüllung der definierten Ziele ermittelt. Der zweite Schritt besteht aus den quasi-dynamischen Simulationen in der PowerFactory-Umgebung. In diesem Schritt werden die vorgeschlagenen Ergebnisse aus der MATLAB-Optimierung in semi-realen Situationen untersucht. Mit der quasi-dynamischen Simulationen wird überprüft, ob die Ergebnisse aus Sicht des Netzbetriebs tolerierbar sind und ob man mit bestimmten Strategien den Netzbetrieb erleichtern kann. KW - Cellular approach KW - Optimization KW - Renewable energy KW - Generation KW - Distribution networks KW - Zellularer Ansatz KW - Optimierung KW - Erneuerbare Energien KW - Erzeugung KW - Verteilnetze KW - Verteilungsnetz KW - Erneuerbare Energien KW - Elektrizitätserzeugung KW - Übertragungsnetz KW - Netzstabilität (Elektrische Energietechnik) Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-59009 ER - TY - CHAP ED - Schwarz, Harald ED - Janik, Przemyslaw ED - Leonowicz, Zbigniew ED - Lehmann, Dirk T1 - 7th EEEIC International Workshop on Environment and Electrical Engineering : Wroclaw - Cottbus, 5 - 11. May 2008 N2 - The proposed solution meets the latest trends in world power engineering and has the lowest ecological costs amongst the accessible power engineering solutions. It is also in accordance with the Polish power engineering law, which takes into account the recommendations of the European Economic Commission, the Second Sulphur Protocol and the Framework Convention of the United Nations (concerning the changes of climate). KW - Energievorrat KW - Energieressourcen KW - Umweltmanagement KW - Energy ressource KW - Environmental management Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus-4388 SN - 978-3-940471-07-9 N1 - Zugleich als Printausgabe erschienen ER - TY - THES A1 - Napierala, Artur T1 - Kontaktieren von stromtragfähigen Silikon-Bauelementen T1 - Contacting of current carrying silicon rubber components N2 - Die Vielfalt der Materialien, die in der Lage sind Strom zu führen, hat sich um elektrisch leitfähige Kunststoffe erweitert. Diese Materialien haben vergleichsweise günstige Eigenschaften, wie z.B. eine geringe Dichte und hohe Wetterbeständigkeit. Trotzdem beschränkt sich zurzeit der Einsatz dieser Materialien wegen Stromübergangsproblemen auf geringe elektrische Leistungen. Um solche Materialien auch für hohe Betriebsströme einsetzen zu können, ist eine zuverlässige Kontaktierung erforderlich. Dieser Beitrag behandelt die Kontaktierung zwischen stromtragfähigem Kunststoff und Metall. Ein wesentlicher Teil der Arbeit beschäftigt sich mit potenziellen Ursachen von Kontaktierungsproblemen, die weiterhin am Beispiel von elektrisch leitfähigem Silikonkautschuk analysiert werden. Bei der Suche nach Ursachen für diese Probleme werden mechanische, thermische und elektrische Aspekte sowie deren Zusammenhänge in Betracht gezogen. Da die Technologie in wesentlichem Maß die physikalischen Eigenschaften bestimmt, wird deren Einfluss ebenfalls analysiert. Neben der theoretischen Betrachtung wurden vielfältige Untersuchungen zu diesen Aspekten durchgeführt, und deren Relevanz für die Stromübergangsprobleme ermittelt. Daraus ließ sich am Ende die Ursache der Stromübergangsprobleme ableiten. Ausgehend von den gewonnen Ergebnissen und unter Berücksichtigung der spezifischen Eigenschaften von leitfähigem Silikonkautschuk wird eine Verbesserungsmöglichkeit zur Kontaktierung vorgestellt. Sie basiert auf einer Modifikation der Oberflächen, speziell deren Metallisierung. Hierbei hat sich das Magnetronsputtern, Metallisierung von Werkstoffen im elektromagnetischen Feld unter Vakuum, als am besten geeignetes Verfahren erwiesen. Nach der Beschichtung der Oberfläche des leitfähigen Silikonkautschuks mit Aluminium bzw. Titan hat sich der Stromübergang und damit auch die Stromtragfähigkeit wesentlich verbessert. Anschließend werden die Ursachen für diese Verbesserung erklärt und die elektrische Belastbarkeit vor und nach der Oberflächenmodifikation ausgewertet. Die Arbeit gibt Hinweise auf weitere Möglichkeiten zur Verbesserung der Stromtragfähigkeit, zeigt somit weiteren Untersuchungsbedarf auf. N2 - The diversity of materials, which are able to carry electricity, has been expanded to electrical conductive plastics. These materials have comparatively favourable properties, such as low density and high weather resistance. Nevertheless, application of these materials is confined to low electric power due to the problems in current passage areas. In order to apply such materials to high operating currents a reliable contacting is necessary. This contribution examines contacting between electrical conductive plastic and metal. An essential part of this work deals with possible problem causes in contacting, which furthermore are analysed on the example of electrical conducting silicone rubber. Mechanical, thermal and electrical aspects as well as their relationships are taken into account in search of causes for these problems. Because technology essentially determines physical properties, its influence is also analysed. Alongside theoretical considerations varied tests have been carried out and their relevance to the problems in current passage area has been determined. The reasons for problems in current passage areas have been finally deducted from the tests. Supported by the gained results as well as in consideration of the specific properties of silicone rubber, a possibility of improvement in contacting is shown. It is based on the surface modification and particularly on its metallization. Here, magnetron sputtering, metallization of materials in electromagnetic field, has proved to be the best suitable process. After coating the surface of silicone rubber with aluminium or titan the current-carrying capacity has improved significantly. Subsequently the causes of this improvement were explained and the electrical load-carrying capacity before and after the modification of the surface was evaluated. This thesis gives indications of further possible improvements of the current-carrying capacity and thus points out the necessity for further research. KW - Silicone KW - Elektrisches Bauelement KW - Elektrischer Kontakt KW - Kontaktieren KW - Leitfähiger Silikonkautschuk KW - Magnetronsputtern KW - Contacting KW - Electrically conductive silicon rubber KW - Magnetron sputtering Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus-19174 ER - TY - THES A1 - Ying, Shaoqing T1 - Auswirkungen auf die Niederspannungsnetze bei hoher Penetration von innerstädtischen Photovoltaikanlagen und Elektrofahrzeugen T1 - Impact of a high penetration of urban photovoltaic systems and electric cars on the low voltage networks N2 - Durch die schnell steigende Durchdringung von innerstädtischen Photovoltaikanlagen und Elektrofahrzeugen in den Niederspannungsnetzen wird die zukünftige Versorgungsinfrastruktur herausgefordert. Die Schwerpunkte der Netzauswirkungen werden auf das Spannungsband und die tolerierte Netzbelastung der untersuchten Netze fokussiert. Das Ziel dieser Dissertation ist es, die zulässig installierbare Photovoltaikleistung in den Wohnsiedlungen zu ermitteln und die möglichen Lösungen zur Vermeidung des notwendigen Netzausbaues zu entwickeln. Zunächst wurde eine Untersuchung zur Ermittlung des Photovoltaikpotenzials in der Stadt Cottbus mit ca. 100.000 Einwohnern durchgeführt. Insgesamt ist ca. 250 MWp Photovoltaikleistung theoretisch installierbar. Dies kann zu einer maximalen Summeneinspeiseleistung von 200 MW führen, welche die derzeitige Lastspitze in Cottbus weit überschreiten würde. Zur Ermittlung der Netzauswirkungen auf die Niederspannungsnetze bei hoher Penetration von Photovoltaikanlagen und Elektrofahrzeugen wurden die folgenden drei Modelle erstellt: Das Photovoltaikeinspeisemodell basiert auf der gemessenen Globalstrahlung mit realen Zeitreihen in Cottbus. Zur Modellierung der Lastgänge von Haushalten wird das Standardlastprofil zur Verfügung gestellt. Die zusätzlichen Ladelastgänge von Elektrofahrzeugen werden den derartigen Lastgängen von Haushalten überlagert. Die Netzstruktur wurde für Ein- und Zweifamilienhaussiedlungen und Mehrfamilienhaussiedlungen modelliert. Die Simulationen wurden in der Netzberechnungssoftware ELEKTRA durchgeführt. Es ist festzuhalten, dass die installierbare Photovoltaikleistung in den Ein- und Zweifamilienhaussiedlungen beschränkt werden muss. Durch eine induktive Blindleistungsbereitstellung kann die zulässige Leistung erhöht werden. In den Mehrfamilienhaussiedlungen ist eine komplette Ausnutzung der Dachfläche mit Photovoltaikanlagen möglich. Zum Schluss wurden zwei Varianten durch Einsatz der Speichersysteme zur besseren Integration der Photovoltaikanlagen entwickelt und dann anhand eines Beispielnetzes demonstriert. N2 - With the fast growing penetration of photovoltaic systems and future electric cars in the low voltage networks, the energy supply will be challenged. Main concerns of the impact on the networks are focused on the voltage band and tolerable utilisation ratio. The aim of this dissertation is to evaluate the acceptable penetration limit of photovoltaic systems in the urban residential settlements and to find out solutions to avoid the necessary network extensions. In the first part a study of the photovoltaic potentials was carried out in the city of Cottbus that inhabits approximately 100.000 people. About 250 MWp photovoltaic capacities could be installed. This could result in a maximum photovoltaic power infeed of 200 MW, which would clearly exceed the current peak load and highly stress the grids. To analyse the impact of high penetration of photovoltaic systems and electric cars more specifically, the following three models must be created: The photovoltaic system model is based on the real solar radiation data in Cottbus. The standard load profile was used for the consumer model, where the electric cars were considered as additional loads. Different network models were investigated for detached house settlements and apartment settlements. The simulations were carried out in the software ELEKTRA. The results showed that, the permissible installable photovoltaic capacity per accommodation unit in the detached house settlement is supposed to be limited. By generating reactive power from the inverters of the photovoltaic generators, the permissible photovoltaic capacity can be increased. In the apartment settlements, the available roofs can be used for installation of photovoltaic systems without limitation. In the end, two solutions by using batteries for a better integration of the photovoltaic systems were developed and demonstrated in an example network. KW - Niederspannungsnetz KW - Elektrofahrzeug KW - Photovoltaikanlage KW - Photovoltaikanlagen KW - Elektrofahrzeuge KW - Netzauswirkungen KW - Spannungsband KW - Netzbelastung KW - Photovoltaic systems KW - Electric cars KW - Network impact KW - Voltage band KW - Network utilisation ratio Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus-24421 ER - TY - THES A1 - Venna, Karthik Reddy T1 - A Simulation analysis to improve the dielectric strength inside High Voltage Vacuum Interrupters T1 - Simulationsanalyse zur Verbesserung der dielektrischen Festigkeit im Inneren von Hochspannungs-Vakuumschaltröhren N2 - Vacuum circuit breakers are expected to be one of the possible alternatives for SF6 circuit breakers in transmission voltages up to 230kV because of the excellent insulation as well as environmental friendly characteristics of vacuum. But for higher voltages, maintaining the electrical insulation inside and outside the interrupter tube is very important and becoming a challenge for the design engineers. Normally a vacuum interrupter consists of metal shields sandwiched between the ceramic insulator blocks inside the tube. The primary purpose of these metal shields is to protect the insulator walls by avoiding metal vapor deposition during the arcing process. On the other hand, these metal shields also influence the electric field distribution inside the interrupter tube. The presence of the metal shields may reduce the dielectric strength of the interrupter tube if proper measures are not taken. This research is devoted to provide the information about the possible areas inside and outside the interrupter tube that are considered as critical in terms of dielectric strength because of the presence of metal shields. Possible solutions are also given in this thesis to overcome the high field stress in these critical areas with the help of 2D simulations that are simulated in ANSYS Maxwell. The critical areas and their respective solutions presented in this work are (1) unidentified edges outside the interrupter tube which are formed by the metal shields that are inserted between the ceramic blocks. These edges, at high field stress, may act as a source of discharges between the interrupter tube and the outer insulator. This problem can be reduced by the combination of using a pressurized insulating gas (which is in this case N2) between interrupter tube and outer insulator and by extending the unidentified edges and covering them with field grading rings which are conductive in nature. (2) Triple junctions (Vacuum-Ceramic-Metal shield) are the sources of high field stress inside the interrupter tube and are considered as a primary source of Secondary Electron Emission Avalanche that takes place on the (3) ceramic surface. The triple junction emissions can be avoided by properly designing the insulator geometry at point of contact with the metal shield. In addition, inserting metal parts of certain depth at the both ends of the ceramic insulators can also reduce the field stress at the triple junctions and avoid surface flashovers on the ceramic surface. (4) The gap between the metal shield and the contact rod is also considered to be a critical area which can be highly stressed (field) if the geometry of metal shield curvature is not properly designed. Various metal shield curvatures are proposed and simulated and an optimum geometry is suggested that reduces the electric field stress between the metal shield and contact rod. Using this optimized metal shield curvature, the diameter of the interrupter tube can be reduced considerably which in turn reduces the size of the interrupter tube. N2 - Vakuum-Leistungsschalter sind eine der möglichen Alternativen zum SF6-Leistungsschalter in den Übertragungsspannungen bis 230kV auf Grund der ausgezeichneten Isolierung sowie umweltfreundlichen Eigenschaften des Vakuums sein. Aber für höhere Spannungen ist das Aufrechterhalten der elektrischen Festigkeit innerhalb und außerhalb der Schaltröhre sehr wichtig und immer eine Herausforderung für die Entwicklungsingenieure. Normalerweise enthält eine Vakuumschaltröhre Metallabschirmungen, die zwischen den Keramikisolatoren im Inneren der Röhre angeordnet sind. Der Hauptzweck dieser Metallabschirmungen ist, die inneren Wände des Isolators vor Metalldampf-Ablagerungen zu schützen, die während des Löschprozess auftreten. Diese Metallabschirmungen beeinflussen die elektrische Feldverteilung im Inneren der Schaltröhre und können daher die dielektrische Festigkeit der Schaltröhre reduzieren, wenn keine entsprechenden Maßnahmen getroffen werden. Ziel der vorliegenden Untersuchung ist es, Informationen über die möglichen Bereiche innerhalb und außerhalb der Schaltröhre zu sammeln, die aufgrund der Anwesenheit von Metallabschirmungen als kritisch hinsichtlich der dielektrischen Festigkeit angesehen werden. Mögliche Lösungen werden in dieser Arbeit genannt, um die hohe Feldstärke in diesen kritischen Bereichen mit Hilfe von 2D-Simulationen in ANSYS Maxwell zu reduzieren. Die kritischen Bereiche und ihre jeweiligen Lösungen in dieser Arbeit sind (1) undefinierte Kanten der Metallabschirmung außerhalb der Schaltröhre, die zwischen den Keramikteilen auftreten. Diese Kanten können bei hoher Feldstärke als Quelle von Entladungen zwischen der Schaltröhre und dem äußeren Isolator wirken. Dieses Problem kann durch die Kombination eines unter Druck stehenden Isoliergases (in diesem Fall N2) zwischen der Schaltröhre und dem äußeren Isolator und durch die Verlängerung der undefinierten Kanten in leitfähige Feldsteuerringe hinein vermieden werden, die als Abdeckung wirken. (2) Triple-Punkte (Vakuum-Keramik-Metall Abschirmung) sind die Ursache einer hohen Feldstärke in der Schaltröhre und werden als primäre Quellen der Sekundärelektronenemission gesehen, die als Stoßentladung auf der Keramikoberfläche (3) auftreten. Die Triple-Punkte-Emissionen können durch die richtige Gestaltung der Isolatoren am Kontaktpunkt mit dem Metallschirm vermieden werden. Zusätzlich werden durch Einsetzen von Metallteilen bestimmter Tiefe an den beiden Enden der Keramikisolatoren auch die Feldstärke im Triple-Punkte Bereich reduziert und Überschläge auf der Keramikoberfläche vermieden. (4) Der Abstand zwischen der Metallabschirmung und dem Kontaktbolzen wird ebenfalls als kritischer Bereich durch das hoch belastete Feld betrachtet, wenn die Krümmung der Metallabschirmung nicht richtig ausgebildet ist. Verschiedene Krümmungen für die Metallabschirmung werden durch Simulation untersucht. Eine optimale Geometrie der Krümmungen wird vorgeschlagen, die die elektrische Feldstärke zwischen der Metallabschirmung und dem Kontaktbolzen reduziert. Mit dieser optimierten Krümmung der Metallabschirmung kann der Durchmesser der Schaltröhre und damit das Volumen der Schaltröhre erheblich reduziert werden. KW - High voltage vacuum interrupter KW - Triple junctions KW - Field grading rings KW - Metal shields KW - ANSYS maxwell KW - Triple-Punkte KW - Feldsteuerringe KW - Elektrische Feldstärke KW - Hochspannungs-Vakuumschaltröhre KW - Metallabdeckungen KW - Vakuumschalter KW - Hochspannungsschalter KW - Durchschlagsfestigkeit Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-33551 ER - TY - THES A1 - Bao, Han T1 - Optimal design of 245kV SF₆ bushing by using genetic algorithm T1 - Optimale Gestaltung der 245kV SF₆ gasisolierte Durchführung durch genetischen Algorithmus N2 - Currently more and more researches of high voltage bushings are focused on the requirements for a simple structure, compactness and light-weight. The general operation of SF6 gas-filled bushings (SF6 bushings) is satisfying the requirements, but in the operation and design of SF6 bushings still many improvements may be possible. The minimizing of dimension might enhance the electric field strength (E) on the crucial points of bushings, which may lead to partial discharge, flashover and even break down. Electric field distribution along the surface mainly depends on contour design, besides the effect of contamination. This dissertation mainly describes the optimization of the bushings design by genetic algorithm. First, a model of SF6 bushing was developed and simulated for the theory purpose. Then, the potential breakdown problems were defined and the mechanisms of the potential breakdown were explained. Afterwards, the dissertation proposes an approach, i.e. genetic algorithm to optimize the contour design of SF6 bushings. The approach improved the execution efficiency by accessing the fitness values of searched solutions during the optimization process. To verify the effectiveness of the genetic algorithm, it has been applied to minimize the electric field strength at the critical positions. Furthermore, the critical points of SF6 bushings were optimized. Several new structures of the ground electrode were proposed and optimized separately by genetic algorithm. A new curve, i.e. cubic spline was applied to the contour of the top flange to avoid the influence of the triple points. By optimization E on the surface of top flange was minimized. The potential distribution on the surface of insulator was optimized by a new structure. By the genetic algorithm the contour of composite weather sheds (WS) was optimized as water-drop form. In summary, a more uniform potential distribution along the surface of weather sheds and minimal values of electric field strength at critical points can be derived effectively by genetic algorithm. In addition, a smaller dimension of SF6 bushing was obtained in comparison with presently available ones. N2 - In Schaltanlagen bis zur Spannungsebene 245 kV werden grob gesteuerte Durchführungen verwendet. Derzeit konzentrieren sich immer mehr Entwicklungen solcher Durchführungen auf eine einfache Gestaltung, kompakten Aufbau und geringes Gewicht. Obwohl im Allgemeinen SF6-gefüllte Durchführungen die gestellten Anforderungen erfüllen, gibt es weitere Möglichkeiten, die SF6-gefüllte Durchführung im Betrieb und Design zu verbessern. Geringere Dimensionen könnten die elektrische Feldstärke an Schwachstellen der Durchführung verstärken und dadurch Teilentladungen und Überschläge verursachen, die zur Zerstörung der Durchführung führen. Darüber hinaus hängt die elektrische Feldstärke von der Gestaltung der Oberfläche und vom Grad der Verschmutzung ab. Diese Dissertation stellt vor Allem die Optimierung der Strukturen einer SF6-gefüllten Durchführung mittels genetischem Algorithmus vor. Zunächst wurde ein Modell der SF6-gefüllten Durchführung entwickelt und für den Theorie-Zweck simuliert. Danach werden potentielle Probleme identifiziert und näher erläutert. Anschließend folgt eine Einführung in die Methode des genetischen Algorithmus zur Optimierung des Kontourdesigns. Die Ausführungseffizienz wird durch den Zugriff auf die Fitnesswerte während des Optimierungs-verfahrens verbessert. Die Validierung des genetischen Algorithmus wird durch Minimieren der elektrischen Feldstärke an den Schwachstellen verifiziert. Damit ist die Gestaltung der Schwachpunkte optimiert worden. Verschiedene neue Strukturen der Erdelektrode wurden vorgeschlagen und durch Anwenden des genetischen Algorithmus optimiert. Durch Verwenden einer neuen Kurve aus kubischen Splines wurde die Kontur der Kopfelektrode so gestaltet, dass der Einfluss von Tripelpunkten vermieden wurde. Die elektrische Feldstärke an der Oberfläche der Kopfelektrode ist durch Anwenden des genetischen Algorithmus minimiert worden. Die Potentialverteilung entlang der Oberfläche des Isolierkörpers wurde durch eine neue Struktur optimiert. Die Enden der Rippen des Silikon-Verbundisolators sind ebenfalls mit Hilfe des genetischen Algorithmus für das Verhalten bei Befeuchtung gestaltet worden. Unter Verwendung des genetischen Algorithmus sind eine gleichmäßigere Potentialverteilung entlang der Gehäuseoberfläche und minimale Werte der elektrischen Feldstärke an Schwachstellen erreicht worden. Die Dimensionen der so optimierten SF6-Durchführung sind geringer als die der ursprünglichen Durchführung. KW - Optimized contour design KW - SF6 bushing KW - Streamer theory KW - Ansoft Maxwell KW - Bézier curve KW - Optimale Gestaltung KW - SF6 Durchführung KW - Streamer Theorie KW - Ansoft Maxwell KW - Bézier Kurve KW - Hochspannungsanlage KW - Schwefelhexafluorid KW - Genetischer Algorithmus KW - Optimierung Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-31751 ER - TY - THES A1 - Stürmer, Henryk T1 - Ein Beitrag zur Spannungsaufteilung über den Unterbrechereinheiten von Hochspannungsleistungsschaltern ohne Steuerkondensatoren T1 - A contribution to the voltage division across the interrupter units of high voltage circuit breakers without grading capacitors N2 - Hochspannungs-Leistungsschalter mit mehreren Unterbrechereinheiten werden gängigerweise mit parallel geschalteten Steuerkondensatoren größerer Kapazität betrieben. Dadurch erfolgt eine weitgehend gleichmäßige Aufteilung der Spannung über die einzelnen Schaltstrecken. Der Einsatz von Steuerkondensatoren verursacht zusätzliche Kosten für die Leistungsschalter. Obendrein sind sie potentielle Fehlerquellen. Daher besteht ein Interesse, die Notwendigkeit der Steuerkondensatoren zu untersuchen. Hierzu sind die kleinen Kapazitäten der Unterbrechereinheiten des Hochspannungs-Leistungsschalters zu bestimmen, um die genaue Spannungsaufteilung ohne Steuerkondensatoren zu erhalten. Nach der Betrachtung verschiedener Verfahren zur relativ schwierigen Messung der kleinen Kapazitäten der Unterbrechereinheiten folgen Messungen sowie Feldsimulationen, um den Einfluss der Umgebung der Leistungsschalter im praktischen Betrieb auf die Spannungsverteilung über den unbeschalteten Unterbrechereinheiten zu ermitteln. N2 - High-voltage circuit-breakers are generally equipped with parallel grading capacitors of high capacitance. Thus, the voltage is distributed almost equal across the individual interrupting units. The use of grading capacitors means additional costs for the circuit-breakers. Moreover, they are potential sources of failures. Therefore, it is of interest to investigate the necessity of grading capacitors. As a precondition the small capacitances of the interrupter units of the circuit-breaker have to be measured to find the exact voltage distribution without grading capacitors. After considering various methods for the relatively difficult measurement of the small capacitances of the interrupter units measurements have been carried out. They have been complimented by field simulations to determine the influence of the environment on the voltage distribution across the interrupter units without grading capacitors in practical service. KW - Hochspannungsleistungsschalter KW - Spannungsaufteilung KW - High voltage circuit breaker KW - Voltage distribution KW - Hochspannungsleistungsschalter KW - Spannungswandler Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-31802 ER - TY - THES A1 - Challagondla, Naresh Kumar T1 - Behaviour of water drop on the insulator surface and study of electric field distribution on parallel insulators under DC T1 - Verhalten von Wassertropfen auf der Isolator-Oberfläche und Untersuchung der elektrischen Feldverteilung auf parallelen Isolatoren unter DC N2 - With the recent developments in electrical transmission system, HVDC transmission for long distances has become feasible. With this development, many insulators are being used in HVDC system. Different kinds of insulators are situated at different places (example: desert, near to sea, agriculture area, etc.) so they will get expose to different types of pollution. Pollution affects the behavior of insulation in terms of breakdown and withstand capability. The application experience of insulators under HVDC conditions is limited. There is a necessity to understand the flashover performance and to recognize key parameters in the design and dimensioning of insulators used under HVDC conditions. This dissertation presents the difference between the analysis of partial breakdowns at AC and DC. The dissertation explains the behavior of a water drop on insulator shed surface energized with DC. It deals with the moving water drop and hanging drop at the edge of the shed. There are many situations where insulator structure should be in parallel. For example, the structure of insulators in vertical disconnector equipment often is parallel. If insulators are arranged in parallel, then the behavior of the electric field is totally different. It is important to know the behavior of these insulators used in HVDC system. This report also explains the pollution and non-pollution behavior of parallel insulators energized with DC. The results can be a source of information to optimize the design and dimensioning of HVDC insulators, especially in pollution conditions. N2 - Mit den neuen Entwicklungen im Bereich der elektrischen Übertragungsnetze wurde die HGÜ für große Entfernungen ermöglicht. Durch diese Entwicklungen werden viele Isolatoren im HGÜ-System verwendet. Unterschiedliche Arten von Isolatoren werden an verschiedenen Orten eingesetzt (z.B.: in der Wüste, in der Nähe vom Meer, im landwirtschaftlichen Bereich, etc.), wodurch sie auch unterschiedlicher Verschmutzung ausgesetzt werden. Die Verschmutzung beeinflusst das Verhalten der Isolation in Bezug auf ihre Belastbarkeit und ihr Versagen. Die praktischen Erfahrungen mit Isolatoren unter HGÜ-Bedingungen sind begrenzt. Es ist erforderlich das Überschlagverhalten zu verstehen und die wichtigen Parameter für die Auslegung und Dimensionierung von Isolatoren unter HGÜ Bedingungen zu erkennen. Diese Dissertation stellt den Unterschied zwischen Teilentladungen bei AC und DC dar. Die Dissertation erklärt das Verhalten eines Wassertropfens auf der Schirm Oberfläche des Isolators bei angelegter DC Spannung. Sie befasst sich mit bewegten Wassertropfen und hängenden Tropfen am Rand des Schirms. Es gibt viele Situationen, in denen eine parallele Isolator-Struktur erforderlich ist. Zum Beispiel kommt in vertikalen Trennschaltern eine parallele Struktur der Isolatoren vor. Wenn Isolatoren parallel angeordnet sind, ist das Verhalten des elektrischen Feldes völlig unterschiedlich. Es ist wichtig, das Verhalten der Isolatoren in der HGÜ-Anlage zu kennen. Dieser Bericht erklärt auch das Verhalten bei der Verschmutzung und im verschmutzungsfreien Zustand von parallelen Isolatoren unter DC Spannung. Die Ergebnisse können als Informationsquelle verwendet werden, um die Auslegung und Dimensionierung von HGÜ-Isolatoren, insbesondere bei Verschmutzung, zu optimieren. KW - HVDC KW - High-Voltage insulators KW - Pollution performance KW - Water drop behavior KW - Parallel insulators KW - Ansys Maxwell KW - HGÜ KW - Hochspannungsisolatoren KW - Verhalten bei Verschmutzung KW - Verhalten von Wassertropfen KW - Parallele Isolatoren KW - Hochspannungsisolator KW - Wassertropfen Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-33718 ER - TY - THES A1 - Federau, Erik T1 - Ein Beitrag zur Konzeptionierung eines Leitsystems für ein steuerbares Microgrid T1 - A contribution to the conceptual design of a control system for a controllable microgrid N2 - Die vorliegende Arbeit beschäftigt sich mit der Entwicklung eines Leitsystems für ein Microgrid. Der Begriff Leitsystem beschreibt die Gesamtheit aller Komponenten und Einrichtungen für eine zentrale Steuerungs- und Überwachungszentrale, in der eine Datensammlung aus hierarchisch niederen Ebenen erfolgt. Das Ziel: Prozesse und Abläufe sollen erfasst und für den Anwender sichtbar gemacht werden. Als Microgrid wird in diesem Kontext ein inselnetzfähiges, lokal begrenztes Smart Grid bezeichnet. Grundlage für die Entwicklung eines Leitsystems für ein Microgrid bildet die klassische Verteilung der Ebenen zur Anpassung standardisierter und anwendungserprobter Strukturen. Diese werden im Rahmen alternativer Ansätze abgestimmt. So wird das „Smart Grid Architecture Modell“ (SGAM) auf die Ebenen des Microgrids angewendet. Hier wird innerhalb der Ebenen nach spezifischen Aufgaben und den damit verbundenen Eigenschaften unterschieden. Das hat eine Komplexitätsreduzierung der fünf Ebenen zur Folge. Vor dem Hintergrund spezifischer Normungsaktivitäten kann so die Erarbeitung bzgl. Interoperabilitätsbedingungen innerhalb der Bereiche problemloser und übersichtlicher gehandhabt werden. In der vorliegenden Arbeit werden verschiedene Leitsystemansätze für ein Microgrid vorgestellt. Diese können dezentrale Anlagenteile in ihren separaten Steuer- und Regelprozessen anleiten oder zum Teil beeinflussen. Ein Energiemanagementsystem mit Microgrid-relevanten Applikationen und Fahrplantools wird als Hilfsmittel zur bedarfsgerechten Führung eines intelligenten Kleinstnetzes ebenfalls abgebildet. Abschließend erfolgt die Implementierung eines Leitsystems in ein universitäres Microgrid. N2 - This thesis deals with the development of a control system for a microgrid. The term control system herewith is used to describe all components and devices of a centralized control and monitoring center in which a collection of data from hierarchically lower levels takes place. Its aim is to track processes and procedures and to make them visible for the user. In this context, a microgrid describes a separate (stand-alone) and locally limited Smart Grid. Developing a control system for a microgrid is based on the conventional allocation of the levels to adapt standardized and field-proven structures. As part of alternative approaches the latter are adjusted accordingly. Thus the “Smart Grid Architecture Model” (SGAM) is applied to the levels of a microgrid. Within these levels a distinction is made concerning specific tasks and their according characteristics. This leads to a reduction of complexity within the five levels. Against the backdrop of specific standardization activities, the development according to interoperability requirements within these levels can be handled clearly and without problems. In this thesis different control system approaches for a microgrid are presented which can guide or partially influence decentralized plant components within their separate control and regulating processes. Furthermore, an energy management system with microgrid-relevant applications and timetable tools is also presented as a supportive mean for a needs-orientated management of an intelligent microgrid. A control system such as this has been implemented into a microgrid on campus. KW - Micro Grid KW - Smart Grid KW - Leitsystem KW - Kleinstnetz KW - Control system KW - Microgrid architecture model KW - Elektrizitätserzeugung KW - Algorithmus Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-37687 ER - TY - THES A1 - Taheruzzaman, Muhammad T1 - Design, modelling, and planning of renewable energy integrated microgrid for rural electrification in Bangladesh N2 - The Electric power crisis is one of the major problems in Bangladesh, the gap between demand and generation is increasing day by day. Moreover, most of the power plants are gas based which will be phased out in future. An alternate electric supply is an essential part for electrifying the developing countries, in this context an innovative approach of rural electrification including DC microgrid, mini-grid and nanogrid would be technically and economically feasible. The thesis draws also attention on the development of technology which enables community owned power system to emerge in the rural areas based on distributed SHS and demand of that community. Firstly, the electric status and renewable potential in Bangladesh are studied and considered those data into the software based simulation to analysis the technical feasibility to implement DC microgrid by Homer pro tools. The distributed RES (Renewable Energy sources) considered solar PV and biomass. The booming of a large number of individual SHS (Solar Home System) in Bangladesh, bottom-up energy sharing concept would have studied to configure the optimal design of microgrid system and different configuration including grid connected and DC and AC system studied. Secondly, The PV module is highly dependent on cell temperature and solar irradiance, the ambient temperature, and solar irradiance mathematical equation have been considered to model and simulate in MATLAB/SIMULINK based environment. Similarly charge controller, battery operation, and performance analysis with respect to the PV model. In the distributed energy sources are mainly SHS including large size and regular also model and simulate in MATLAB/SIMULINK software. For instance, the thesis mainly focuses on an optimal design, planning, sizing of DC hybrid microgrid, the SHS, and biomass-based power system with the goal of maximizing the efficiency and reliability. Homer Pro tool used in the work for design an optimal configuration and sizing for technical feasibility. Finally, a model of DC microgrid compresses with micro sources like SHS systems, µ-CHP, the household loads model in MATLAB/SIMULINK. Decentralized SHS control strategies (droop control) and operation also design and model in MATLAB/SIMULINK environment, where DC – DC converter needs to couple SHS and DC microgrid. KW - Biomass KW - Microgrid KW - Solar home system KW - Rural electrification KW - SIMULINK KW - Biomasse KW - Energiemanagement KW - Fotovoltaikanlage KW - Elektrifizierung KW - Ländlicher Raum Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-39884 ER - TY - THES A1 - Bonkarev, Maxim T1 - Concept analysis for High-Voltage Direct-Current circuit breakers for application in a network of HVDC transmission T1 - Konzeptanalyse für Hochspannungsgleichstrom-Übertragungsschalter für die Anwendung in einem HGÜ Übertragungsnetz N2 - For several decades HVDC technology was used primarily for point-to-point bulk power transmission. Although multiterminal HVDC systems are very few in number, it is expected that multiple HVDC links may be interconnected into HVDC transmission grid. Since every meshed grid requires reliable protection solution, an HVDC circuit breaker must be developed and introduced. This thesis focuses on the performance evaluation of different HVDC circuit breaker concepts. The performance evaluation study is carried out by means of numerical simulations. The obtained quantitative results describe capabilities and limitations of different HVDC circuit breaker concepts as well as the reaction of HVDC network on switching operations. Different converter protection measures and in particular application of fault current limiter were considered, too. Based on the research findings, a number of recommendations for HVDC circuit breaker development are given and suggestions for further research activities are presented. N2 - Seit mehreren Jahrzehnten wurde die HGÜ-Technologie hauptsächlich für die Punkt-zu-Punkt Übertragung der großen Strommengen verwendet. Obwohl multiterminale HGÜ-Systeme nicht zahlreich vertreten sind, wird erwartet, dass mehrere HGÜ-Leitungen in HGÜ-Netz verbunden werden können. Da jedes vermaschte Stromnetz zuverlässige Schutzlösung erfordert, muss ein HGÜ-Leistungsschalter entwickelt und eingesetzt werden. Diese Doktorarbeit konzentriert sich auf die Leistungsbewertung der verschiedenen HGÜ-Leistungsschalterkonzepte. Die Leistungsbewertungsstudie wird durch numerische Simulationen durchgeführt. Die erhaltenen quantitativen Ergebnisse beschreiben Möglichkeiten und Grenzen der verschiedenen HGÜ-Leistungsschalterkonzepte sowie die Gegenwirkung des HGÜ-Netzwerkes auf Schaltvorgänge. Verschiedene Umrichter-Schutzmaßnahmen und insbesondere Anwendung der Strombegrenzer wurden auch untersucht. Auf Grundlage der Forschungsergebnisse werden eine Reihe von Empfehlungen für die Entwicklung des HGÜ-Leistungsschalters gegeben und Anregungen für weitere Forschungsaktivitäten vorgestellt. KW - Multi-terminal HVDC KW - HVDC circuit breaker KW - Fault protection methods KW - Network response KW - Simulation-based performance evaluation KW - Multiterminale HGÜ KW - HGÜ-Leistungsschalter KW - Fehlerschutzmethoden KW - Netzwerkreaktion KW - Simulationsbasierte Leistungsbewertung KW - Hochspannungsgleichstromübertragung KW - Vermaschtes Netz KW - Netzschutz KW - Leistungsschalter KW - Fehlererkennung Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-35459 ER - TY - THES A1 - Dewi, Sari T1 - Repowering public utility grid by integrating hydro, PV and wind into the grid to supply electricity in Palu (Indonesia) T1 - Erneuerung des öffentlichen Stromversorgungsnetzes durch Integration von Wasserkraft, PV und Wind in das Netz zur Stromversorgung in Palu (Indonesien) N2 - The use of renewable energy sources, either off-grid or on-grid to supply electricity, has been done by developed countries since many years ago. Developing countries, for example Indonesia especially east part of Indonesia have recently started this way whereas renewable energy potential for example hydro, PV and wind are abundantly available. The lack of research and data is one of the obstacles to precede the use of renewable energy in this area, meanwhile this area has electricity shortages problem that occurred quite often. Combined hydro, PV, wind, coal and diesel generators will solve electricity shortages problem in Palu (Indonesia). Integration of Hydro, PV and wind into PALAPAS utility grid will decrease levelized cost of energy from US$ 0.145 per kWh to US$ 0.133 per kWh. Sensitivity analysis against fluctuating fuel cost (from US$ 0.4 per litre to US$ 1.6 per litre) will increase levelized cost of energy before integrating renewable energy into the grid from US$ 0.145 per kWh to US$ 0.455 per kWh and will increase levelized cost of energy after integrating RE into the grid from US$ 0.133 per kWh to US$ 0.403 per kWh. Repowering grid with integrating hydro, PV and wind will increase power quality especially by using configuration based on homer results. Buses voltage and buses frequency showed better result before, during and after some faults based on Homer simulation results. Voltage spectrum and sinusoidal waveform voltage are showing less distortion after integrating hydro, PV and wind into the grid even with no distortion based on Homer results. N2 - Die Nutzung erneuerbarer Energiequellen, die entweder netzunabhängig oder netzfern Strom liefern, ist seit vielen Jahren Aufgabe der Industrieländer. Entwicklungsländer wie Indonesien, insbesondere der östliche Teil, haben kürzlich damit begonnen. Mangelnde Forschung und Datenmangel sind eines der Hindernisse, die der Nutzung erneuerbarer Energien in diesem Bereich entgegenstehen. In diesem Gebiet treten häufig Probleme mit Stromengpässen auf. Die Kombination von Wasserkraft-, PV-, Wind-, Kohle- und Dieselgeneratoren wird das Problem der Stromknappheit in Palu (Indonesien) lösen. Durch die Integration von Wasserkraft, PV und Wind in das Versorgungsnetz von PALAPAS werden die gestaffelten Energiekosten von 0,145 US-Dollar pro kWh auf 0,133 US-Dollar pro kWh gesenkt. Sensitivitätsanalysen bei schwankenden Brennstoffkosten (von 0,4 US-Dollar pro Liter auf 1,6 US-Dollar pro Liter) erhöhen die Energiekosten vor der Integration erneuerbarer Energien von 0,145 US-Dollar pro kWh auf 0,455 US-Dollar pro kWh und erhöhen die Energiekosten nach der Integration von RE in das Stromnetz von 0,133 US-Dollar pro kWh auf 0,403 US-Dollar pro kWh. Das Repowering-Grid mit integrierter Wasserkraft-, PV- und Windenergie wird die Stromqualität erhöhen, insbesondere durch die Konfiguration auf Grund von Homer-Ergebnissen. Die Busspannung und die Busfrequenz zeigten ein besseres Ergebnis vor, während und nachdem einige Fehler auf der Grundlage von Homer-Ergebnissen passierten. Das Spannungsspektrum und die sinusförmige Wellenformspannung zeigen weniger Verzerrung, nachdem Wasserkraft, PV und Wind in das Netz integriert wurden, selbst wenn keine Verzerrungen aufgrund von Homer-Ergebnissen auftraten. KW - Shortage KW - Repowering KW - Grid KW - Integration KW - Energy KW - Engpass KW - Erneuerung KW - Netz KW - Integration KW - Energie KW - Palu, Indonesien KW - Erneuerbare Energien KW - Energieversorgungsnetz KW - Elektrizitätseinspeisung Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-45472 ER - TY - THES A1 - Schmoger, Christin T1 - Sicherheitsbetrachtungen im Fall von stromstarken Erdfehlern in NOSPE-Netzen und bei Netzkopplung T1 - Safety assessments in the case of high-current earth faults in networks with low-impedance neutral point treatment and with network coupling N2 - Der von der Energiewende-bedingte Verteilnetzausbau mit Kabelstrecken beeinflusst den Umgang mit der Sternpunktbehandlung. Neben klassischen Umstellungsmaßnahmen sind neue Lösungen zur Kopplung von Netzen mit unterschiedlicher Sternpunktpunkterdung zu diskutieren. Schwerpunkt stellt jeweils die Auslegung von Erdungsanlagen in Kombination mit einem geeigneten Schutzkonzept zur Einhaltung der Personensicherheit dar. Auf Basis der DIN EN 50522 ist ein mögliches personengefährdendes Potential zu bewerten, welches aus der Stromverteilung an der Fehlerstelle resultiert. In der Praxis wird dabei rechnerisch die zulässige Erdungsimpedanz über den relevanten Teilstrom (dargestellt über den Reduktionsfaktor) und dem, aus dem Schutzkonzept resultierenden, Grenzwert für die Berührungsspannung vorgegeben und messtechnisch geprüft. Vorrangig in Mittelspannungsnetzen mit niederohmiger Sternpunkterdung bestehen Unsicherheiten in der korrekten Interpretation der Norm respektive der Wahl und Beurteilung geeigneter Parameter. Die Dissertation konzentriert sich auf die Schwerpunkte Bestimmung des Reduktionsfaktors in einer inhomogenen, offen betriebenen Ringstruktur von Mittelspannungsnetzen, sowie Diskussion möglicher Modelle und der Wirkungsweise heutiger Messverfahren von Erdungsimpedanzen. Aufbauend auf theoretischen Modell-Analysen wurde eine Methodik zur Auswertung beider Parameter u. a. durch Aufnahme einer Stromverteilung in einem Erdkurzschlussversuch entwickelt und erstmals in einer Netzgruppe durchgeführt. Die Herausforderung bestand darin, Lösungen zum eindeutigen messtechnischen Nachweis beider Parameter infolge von Überlagerungseffekten zu entwickeln. Mithilfe der Versuchsergebnisse konnten bestehende Berechnungs- und Messverfahren sowie unterschiedlichen Modelle zur Interpretation der Erdungsimpedanz bewertet und Handlungsempfehlungen abgeleitet werden. Reduktionsfaktor und Erdungsimpedanz erfahren verschiedene Interpretationen in der Praxis. Daher widmete sich die Dissertation der Analyse des Modells der DIN EN 50522 und schlägt aufgrund der Herausforderungen in der Praxis eine Erweiterung zur eindeutigen Definition vor. Erstmalig konnten anhand des Versuchs die Modellansätze von Berechnungsverfahren für den Reduktionsfaktor geprüft und bestätigt werden. Am Beispiel des VPE-Kabels konnte mit einem Sicherheitsaufschlag ein Planungswert vorgeschlagen werden. Auf Basis des Versuchs und der heutigen Messverfahren wurde diskutiert, dass die Erdungsimpedanz infolge der unterschiedlichen Einbeziehung von Kettenleitern verschiedene Werte annehmen kann. Aufgrund des Zusammenhangs mit dem Reduktionsfaktor resultieren für die Bewertung der Berührungsspannung Kombinationspaare, die nach dem Modell der DIN EN 50522 oder Modifizierungen in der Berechnung ausgelegt und mittels klassischer Messung bewertet werden können. Die Dissertation liefert damit einen Diskussionsbeitrag, wie sich die Auslegung von Erdungsanlagen durch geeignete Verfahren weiterentwickeln kann. N2 - The grid expansions caused by the German Renewable Energies Act (EEG) have an impact on the neutral point treatment of grids due to the addition of power cables instead of overhead lines. Besides conversion measures new solutions for the coupling of networks with different neutral earthing have to be discussed. The focus of the dimensioning of grids with high fault currents is on the rating of the grounding systems in combination with an appropriate selective protection concept to meet personal safety requirements. The concept of calculation and measurement of the grounding impedance is based on the DIN EN 50522. Especially in medium-voltage networks, uncertainties occur within the planning process regarding the appropriate choice of parameters according to the right interpretation of the German standard DIN EN 50522. Hence, this thesis focusses on the following core areas Development of computational procedures for the determination of reduction factors in inhomogeneous and open ring systems of a medium-voltage network; Discussion of models and present measurement standard methods for earthing impedances. To answer the questions, a methodology for the evaluation of data gathered in a short-circuit to earth trial was developed and actually tested in a real existing network for the first time in the German-speaking countries. Especially in the trial an explicit separation of both parameters is essential for a proper interpretation of the results. The Thesis concentrates on the overlapping effect and elaborates possible solution concepts for the parameters metrological evidence. The results of the trial have been compared with calculation methods, measurement methods and existing models of the earthing impedances. The scientific discoveries of this Thesis have been compared with the requirements of the German standard DIN EN 50522 to derive recommendations for the practical application. Reduction factor and earthing impedance are interpreted differently. For this reason, the dissertation analysis the overhead line model of the DIN EN 50522 and proposes to an enhanced model to define discussed practical challenges explicit. Theoretical and practical analyses of the reduction factor further qualify already developed calculation methods and suggest corresponding safety margins for VPE-cables. The comparison of the trial and standard methods indicates that different earthing impedances, caused by the chain conductor, are possible. The interpretation of the earthing impedance has an immediate impact on the reduction factor determination. Within the trial, different combinations of reduction factors with earthing impedances were investigated for the valuation of safety requirements. By means of the evaluation of the short-circuit to earth trials within this Thesis an approach is shown, how the dimensioning of grounding systems with consideration of appropriate measuring and calculation procedures can be developed further. KW - Erdungsanlagen KW - Reduktionsfaktor KW - Erdungsimpedanz KW - Sternpunkterdung KW - DIN EN 50522 KW - Grounding system KW - Reduction factor KW - Earthing impedance KW - Neutral point treatment KW - EN 50522 KW - Mittelspannungsnetz KW - Erdschluss KW - Sternpunkterdung KW - Wechselstromwiderstand KW - Impedanzmessung Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-51131 ER - TY - CHAP ED - Schwarz, Harald ED - Janik, Przemysław ED - Gono, Radomir ED - Lehmann, Dirk T1 - 19th EEEIC International Conference on Environment and Electrical Engineering – Student Edition : Cottbus-Ostrava-Wrocław, June 2020 N2 - In the time of increased awareness about the environment problems by the public opinion and also intensive international efforts to reduce emissions of greenhouse gases, as well increase of the generation of electrical energy to facilitate industrial growth, the conference offers broad contribution towards achieving the goals of diversification and sustainable development. Focus of the student conference is to promote the discussion of views from scientists and students from Wroclaw University of Technology, Technical University of Ostrava and Brandenburg University of Technology Cottbus-Senftenberg. The conference offers prominent academics and industrial practitioners from all over the world the forum for discussion about the future of electrical energy and environmental issues and presents a base for identifying directions for continuation of research. KW - Energy resources KW - Environmental management KW - Power quality KW - Energy system transformation KW - Energieressourcen KW - Energiewende KW - Umweltmanagement KW - Energietechnik KW - Energiequalität KW - Elektrische Energie KW - Energietechnik KW - Energievorrat KW - Umweltbezogenes Management Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-52154 SN - 978-3-940471-55-0 ER - TY - THES A1 - Bendig, Martin T1 - Ein modellbasierter Beitrag zur räumlichen und zeitlichen Analyse von Sektorenkopplungspotenzialen im transformierten Energieversorgungssystem T1 - A model based contribution to spatial and temporal analysis of potentials for sector coupling in transformed energy supply systems N2 - Das deutsche Energieversorgungssystem soll bis zum Jahr 2050 umfassend transformiert werden. Auch wenn es auf dem Pfad zur vollständigen Dekarbonisierung der Energieversorgung noch eine Vielzahl technischer Herausforderungen gibt, ist davon auszugehen, dass an der politischen Ambition einer treibhausgasneutralen Energieversorgung bis spätestens zum Jahr 2045 festgehalten wird. Klimaschutz ist jedoch nur eine Dimension im Spannungsfeld Energiewende. Es gilt, Ökologie, Wirtschaftlichkeit, technische Realisierbarkeit und Versorgungssicherheit sowie gesellschaftliche Aspekte in Einklang zu bringen. Das Ziel dieser Arbeit ist es, einen wissenschaftlichen Beitrag zur Untersuchung eines durch erneuerbare Energieanlagen dominierten Energieversorgungssystems im Jahr 2050 zu leisten. Die Einspeisung elektrischer Energie aus Wind- und Photovoltaikanlagen unterliegt jedoch hohen Fluktuationen. Aus diesem Grund sind im zukünftigen Energieversorgungssystem hohe temporäre Energieüberschüsse und -defizite zu erwarten. Eine mögliche Lösung könnte hierfür die Sektorenkopplung darstellen. Die vollständige Kopplung dieser Sektoren würde es ermöglichen, hohe Energieüberschüsse sinnvoll zu verwenden oder auftretende Energiedefizite auszugleichen. Bedingt durch die fluktuierende EE-Einspeisung sind die Potenziale zur Nutzung von überschüssiger elektrischer Energie in anderen Energie- und Wirtschaftssektoren im Zeitverlauf jedoch nicht konstant. Aus diesem Grund erscheint es sinnvoll, die Diskussion über Sektorenkopplungspotenziale auf zeitlich und räumlich aufgelöste Untersuchungen zu stützen. Ohne die Prognose und Modellierung von zeitlich und räumlich hoch aufgelösten Einspeise- und Lastzeitreihen ist es nicht möglich, zielführende Aussagen über Sektorenkopplungspotenziale und eine bedarfsgerechte Energiebereitstellung im zukünftigen Energieversorgungssystem zu treffen. Zur Quantifizierung und Prognose zukünftiger Sektorenkopplungspotenziale wurde im Rahmen dieser Dissertation ein vielseitig einsetzbares Energiemodell entwickelt und detailliert vorgestellt. Hierbei handelt es sich um eine modular aufgebaute, Microsoft Excel-basierte Lösung in Verbindung mit Visual Basic for Applications. So ist es möglich, das Modell auf jedem modernen Windowssystem ohne weitere Software zu verwenden. Das Energiemodell wurde anschließend auf eine geeignete Modellregion für das Jahr 2050 angewendet. Im Energiemodell werden elektrische Erzeugungs- und Lastzeitreihen in stündlicher Auflösung für bis zu 200 Modellknoten (räumliche Auflösung) ermittelt, miteinander verrechnet und auf mehreren Modellebenen aggregiert. Am Beispiel der gewählten Modellregion konnten so die Sektorenkopplungspotenziale im Rahmen einer Sensitivitätsanalyse umfangreich diskutiert werden. Damit war es möglich, die Forschungsfragen dieser Dissertation detailliert zu beantworten. N2 - Until the year 2050, the German energy supply system shall be transformed comprehensively. Along the path to completely decarbonized energy and economic sectors lie many technical challenges. Nevertheless, it is to be expected, that the German government will continue to pursue its ambition to reach a greenhouse gas-neutral energy supply system by the year 2045 at the latest. However, climate protection is but one aspect of the German Energiewende. It is imperative to reconcile ecology, profitability, technical feasibility, security of supply as well as social aspects. This dissertation aims to provide a scientific contribution to analysing an energy supply system in 2050, that is dominated by renewable energy plants. However, power generation and therefore energy infeed from wind and solar energy systems is subject to high levels of fluctuation. For this reason, temporary energy deficits and surpluses are to be expected. Sector coupling could provide a possible solution to this problem. By energetically coupling the energy and economic sectors, energy surpluses in one sector can be used to supply the energy demand in other sectors. However, due to the fluctuating energy infeed from wind turbines and photovoltaic systems, these sector coupling potentials are also not temporally constant and subject to fluctuations. Therefore, it seems reasonable to analyse and discuss sector coupling potentials with high temporal and spatial resolution. Without modelling and forecasting spatially and temporally resolved time series for energy infeed and demand, it is not possible to make well-founded statements about future sector coupling potentials and a needs-based energy supply. As part of this dissertation, in order to quantify and forecast future sector coupling potentials, a versatile energy system model was developed and described in detail. The model was structured modularly and implemented in Microsoft Excel in conjunction with Visual Basic for Applications. Thereby, it is possible to run the model on any regular Windows operating system without the need for specialized hard or software. In addition, the energy model was used to analyse a suitable model region for the year 2050. The energy model was used to quantify and forecast energy infeed and demand with hourly resolution for up to 200 model nodes (spatial resolution). These time series were then offset against each other and aggregated at different model levels. Using the model region as an example, sector coupling potentials for the year 2050 could be discussed in detail as part of a sensitivity analysis. Thereby, it was possible to answer the research questions of this dissertation. KW - Sektorenkopplung KW - Energieversorgungssystem KW - Energiesystemmodellierung KW - Sector coupling KW - Energy supply system KW - Energy system modelling KW - Energieversorgung KW - Sektorkopplung Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-59749 ER - TY - THES A1 - Dhara, Madhavi T1 - Wirkung von Kabelschirmungskonzepten auf abgestrahlte Magnetfelder von elektrischen Antriebssträngen in Elektro- und Hybridfahrzeugen T1 - Influence of cable shielding concepts on radiated magnetic fields from electric drive trains in pure electric and hybrid vehicles N2 - Jede elektrische, elektronische Komponente für Kraftfahrzeugsanwendungen muss auf Komponentenebene und nach der Montage im Fahrzeug die elektrischen, magnetischen und elektromagnetischen Emissionsanforderungen gemäß Normen erfüllen. Die Entwicklung von Konzepten der elektromagnetischen Verträglichkeit für ein elektrisches Kraftfahrzeug erfordert ein gründliches Verständnis der elektromagnetischen Kopplungsmechanismen des Hochvoltsystems. An einen Elektroantrieb werden vielfältige Anforderungen gestellt. Daraus ergibt sich eine eingeschränkte Handlungsfreiheit zum Erreichen der elektromagnetischen Verträglichkeit. Daher ist es im Entwicklungszyklus nötig, Ressourcen mit Kenntnis der elektromagnetischen Verträglichkeit frühzeitig zielgereicht einsetzen zu können. Hierbei gilt es Designparameter frühzeitig festzulegen und bereits dabei eine Ergebnisbewertung vornehmen zu können. Die Wellenlängen der dominanten Spektren elektromagnetischer Störungen von Spannungsquellenpulswechselrichtern im Vergleich zu den geometrischen Abmaßen eines normal großen Fahrzeugs fallen in den Nahfeldbereich. Dies ermöglicht einen quasistationären Ansatz, bei dem das elektrische Feld und das Magnetfeld getrennt untersucht und analysiert werden können. Der Schwerpunkt dieser Arbeit liegt auf der gestrahlten Magnetfeldkopplung in einem Kraftfahrzeug mit einem Elektroantrieb. Üblicherweise erfordert ein Elektroantrieb für seinen Betrieb funktionale Ströme höherer Größenordnung. Das pulsweitenmodulierte Spannungsschalten der leistungselektronischen Wandler, z.B. bei Pulswechselrichter und Gleichstrom (DC)/DC Wandler, verursacht zusätzlich zu den funktionalen Strömen auch parasitäre Ströme. Diese werden durch Spannungsänderungen am Ausgang der Leistungselektronik erzeugt, die die verteilten Kapazitäten z.B. Statorwicklung zu Rahmenkapazität der elektrische Maschine, anregen. Diese Ströme führen zu Magnetfeldemissionen, an die strenge Anforderungen auf Fahrzeugebene gestellt werden. Abschirmungen werden systematisch zur Verringerung der abgestrahlten Emissionen bei elektrischen Antriebsanwendungen in Kraftfahrzeugen eingesetzt, so auch für die Hochvoltkabel. Die relativ geringen Mengen einer nicht idealen Kabelschirmung sind aufgrund des hohen Grades an abgestrahlten Emissionen von Bedeutung. Folglich sind die Schirm- und Masseschleifenströme, d.h. die Schirmwirkung, entscheidend für die Magnetfelder. Neben diesen Stromverteilungen sind die Magnetfelder wesentlich von der Geometrie der Hochvoltkabelführung und dem Frequenzbereich abhängig. In dieser Arbeit werden drei Arten von Schirmungskonzepten für Hochvoltkabel mittels analytischer Modellierung betrachtet. Die drei Schirmungskonzepte sind einzeln geschirmte Kabel in koaxialer Ausführung, mehradrige geschirmte Kabel in Summenschirmausführung und ungeschirmte Kabel mit parallelem Massedraht als Schirm. Die erstellten analytischen Modelle werden genutzt, um die gestrahlten Magnetfeldemissionen vorherzusagen. Ein Vergleich zur Bestätigung der Anwendbarkeit der analytischen Modelle für ein Elektroantriebssytem wird vorgestellt. Die Wirkung der verschiedenen Schirmungskonzepte für das Kraftfahrzeug wird dargelegt. N2 - Every electronic, electrical component for automotive applications has to comply with the electric, magnetic and electromagnetic emission requirements according to the norms and standards during component test and after its assembly in the vehicle. The development of electromagnetic compatibility concepts for electric vehicles require a thorough understanding of electromagnetic coupling mechanisms of the high volatage system. Limited freedom of modifications in vehicle electric drive necessitates the optimal utilization of available resources which further requires adequate recognition and assessment of electromagnetic compatibility related design parameters. The wavelengths of dominant electromagnetic interferences from voltage source inverter compared to geometrical dimension of a regularly sized vehicle will fall into near field region. It enables a quasi-steady approach in which the electric and magnetic fields can be investigated and analysed seperately. The focus of this work is laid on the radiated magnetic field coupling in an automotive electric drive. Usually automotive electric drive involves higher order functional currents for its operation. Pulse width modulated voltage switching of the power electronic converters like inverter and DC/DC converter causes parasitic currents additional to the functional ones. Parasitic currents are generated due to unbalanced voltages at the output of the power electronics which excite the distributed capacitances for e.g. stator winding to frame capacitance of the motor. These currents result in magnetic field emissions which face stringent requirements on vehicle level. Magnetic fields depend on the current strength, geometry, coupling on antennas and wires or other electronic devices. Shields are systematically used to reduce radiated emissions in automotive electric drive applications, so for the high voltage cables. The relatively small quantities of a non ideal cable shield are of importance due to the high level of radiated emissions. As a consequence, the shield and ground loop currents i.e. shielding effectiveness are decisive for magnetic fields. Along with these current distributions, the magnetic fields are significantly dependent on the geometry of high voltage cable routes and the characteristics in frequency domain. In this work, three types of shielding strategies for high voltage cables i.e. individually shielded cables, multiconductor shielded cables and unshielded cables with parallel ground wire which functions as shield are considered for analytical modelling to predict radiated magnetic field emissions. A comaparitive study on their applicabilty in the automotive electrical drive system is presented. KW - Magnetfeld KW - HV Kabelschirmungskonzepte KW - Gleichtaktströme KW - Gegentaktströme KW - Übertragungsfunktionen KW - Magnetic field KW - HV cable shielding concepts KW - Common mode currents KW - Differential mode currents KW - Transfer functions KW - Elektrofahrzeug KW - Hybridfahrzeug KW - Triebstrang KW - Kabel KW - Elektromagnetische Verträglichkeit KW - Magnetische Abschirmung Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-55008 ER - TY - THES A1 - Jende, Enrico T1 - Ein Beitrag zur modellgestützten Planung und zum Betrieb sektorenübergreifender Energiespeicher mit Fokus auf die Strom- und Wärmeversorgung in Microgrids T1 - A contribution to model-based planning and operation of cross-sectoral energy storage systems with focus on power and heat supply in Microgrids N2 - Zur Einhaltung der Dekarbonisierungsziele und Bewältigung der Herausforderungen bei der ganzheitlichen Transformation des Energiesystems im Kontext der politisch geforderten Energiewende, ist zunehmend der Begriff Sektorenkopplung zu verzeichnen. Eine wesentliche Rolle nimmt dabei die auf den Begriff Power-to-X (P2X) zusammengefasste Elektrifizierung der Sektoren Gas, Wärme, Kälte und Mobilität ein. P2X-Energiewandler und die damit einhergehende Nutzung Erneuerbarer Energien (EE), z.B. aus Photovoltaik (PV) und Wind, sind aufgrund der volatilen Stromerzeugung der EE-Anlagen als dargebotsabhängige Energiewandlung zu verstehen. Aus diesem Grund werden P2X-Energiewandler mit sektoralen Energiespeichern und flexiblen bedarfsgerechten Energiewandlern hin zu sektorenübergreifenden Energiespeichern aggregiert. Diese sind nicht nur in der Lage den Herausforderungen eines zunehmend aus EE bestehenden Energieversorgungssystems (EVS) entgegenzuwirken, sondern einen Beitrag zur sektorenübergreifenden Energiebedarfsdeckung und Dekarbonisierung zu leisten. In diesem Zusammenhang ist in den vergangenen Jahren auf dem Campus der Brandenburgischen Technischen Universität Cottbus-Senftenberg (BTU) eine Forschungs- und Demonstrationsanlage entstanden, welche sektorale und sektorenübergreifende Energiespeicher topologisch lokal aggregiert und hinsichtlich der Netzbetriebsführung verknüpft. Dieser dezentrale Anlagenverbund bietet eine herausragende Möglichkeit, einen sektorenübergreifenden Betrieb der dezentralen EVS auf lokaler Ebene zu untersuchen. Als Forschungsgegenstand und Teilsystem der Forschungs- und Demonstrationsanlage gilt im Folgenden der sektorenübergreifende Energiespeicher bestehend aus den Technologien der Kraft-Wärme-Kopplung, Power-to-Heat und einem thermischen Energiespeicher. Dieser Anlagenverbund wird innerhalb der Systemgrenzen eines Microgrid unter größtmöglicher Nutzung erneuerbarer Energien am Beispiel der PV untersucht. Ein Simulationsmodell erweitert diesen Forschungsgegenstand und zielt auf modellgestützte Untersuchungen zur Planung und zum Betrieb des sektorenübergreifenden Energiespeichers, insbesondere zur stromnetzdienlichen Systemintegration. Die Ergebnisse der Untersuchungen werden im Folgenden dargestellt und gelten als Beitrag zur Systemintegration von sektorenübergreifenden Energiespeichern in die lokale dezentrale Energieversorgung. N2 - To comply with the decarbonisation objectives and to tackle the challenges of the holistic transformation of the energy system in the context of the politically demanded energy transition, is increasingly being used the term sector coupling. The electrification of the gas, heat, cooling and mobility sectors, which is based on the term Power-to-X (P2X), plays a key role here. P2X energy converters and the associated use of renewable energies (EE), e.g. from photovoltaic (PV) and wind, are as a supply-dependent energy conversion to understand in to the volatile power generation of renewable energy plants. For this reason P2X energy converters with sectoral energy storage systems and flexible demand-oriented energy converters are aggregated into cross-sectoral energy storage systems. These are not only able to contract the challenges of an increasing renewable energy supply system (EVS), but also to make a contribute to cross-sectoral energy coverage and decarbonisation. In this context, a research and demonstration facility was built in recent years on the campus of the Brandenburg Technical University Cottbus-Senftenberg (BTU), which aggregates sectoral and cross-sectoral energy storage topologically local and links it regard in to grid operation management. This decentralized network of facilities provides an excellent opportunity to investigate cross-sectoral operation of decentralized EVS in a local level. In the following the research subject and subsystem of the research and demonstration plant is named the cross-sector energy storage consisting of the technologies of combined heat and power, power-to-heat and a thermal energy storage. This system composite is investigated within the system limits of a microgrid with the greatest possibility use of renewable energies using e.g. PV. A simulation model extends this research thesis and aims at a model-based investigations for the planning and operation of the cross-sector energy storage, in particular for grid-compliened system integration. The results of the investigations are presented below and are considered to contribute to the system integration of cross-sectoral energy storage into the local distributed energy supply system. KW - Microgrid KW - Sektorenkopplung KW - Dezentrale Energieversorgung KW - Sektorenübergreifender Energiespeicher KW - Sector coupling KW - Decentralized energy supply KW - Cross-sectoral energy storage KW - Microgrid KW - Microgrid KW - Elektrizitätsversorgungsnetz KW - Dezentrale Energieversorgung KW - Dezentrale Wärmeversorgung Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-52906 ER - TY - CHAP ED - Schenk, Mario ED - Janik, Przemysław ED - Michalec, Łukasz ED - Lehmann, Dirk ED - Schwarz, Harald T1 - 23rd EEEIC International Conference on Environment and Electrical Engineering – Student Edition : Wrocław - Ostrava - Cottbus, June 2024 N2 - In a time of growing public awareness of environmental challenges, intensified international efforts to reduce greenhouse gas emissions, and the increasing demand for electrical energy to support industrial growth, this conference makes a significant contribution to advancing the goals of diversification and sustainable development. The primary aim of the student conference is to foster dialogue among scientists and students from Wroclaw University of Technology, the Technical University of Ostrava, and Brandenburg University of Technology Cottbus-Senftenberg. This conference serves as a unique educational opportunity, encouraging students to author scientific papers, deliver presentations, and engage in discussions about future developments. It is an integral part of the curriculum, offered as an elective module and complemented by a technical excursion. KW - Energiequalität KW - Energieressourcen KW - Energietechnik KW - Energiewende KW - Umweltmanagement KW - Energy ressources KW - Energy system transformation KW - Environmental management KW - Power quality KW - Elektrische Energie KW - Energietechnik KW - Energievorrat KW - Umweltbezogenes Management Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-68952 ER - TY - CHAP ED - Schwarz, Harald ED - Janik, Przemyslaw ED - Gono, Radomir ED - Lehmann, Dirk T1 - 13th EEEIC International Conference on Environment and Electrical Engineering – Student Edition : Wrocław-Ostrava-Cottbus 19th - 23rd of May 2014 N2 - In the time of increased awareness about the environment problems by the public opinion and also intensive international efforts to reduce emissions of greenhouse gases, as well increase of the generation of electrical energy to facilitate industrial growth, the conference offers broad contribution towards achieving the goals of diversification and sustainable development. Focus of the student conference is to promote the discussion of views from scientists and students from Wroclaw University of Technology, Technical University of Ostrava and Brandenburg Technical University of Cottbus. The conference offers prominent academics and industrial practitioners from all over the world the forum for discussion about the future of electrical energy and environmental issues and presents a base for identifying directions for continuation of research. KW - Energiequalität KW - Elektrische Energie KW - Energietechnik KW - Energievorrat KW - Umweltbezogenes Management KW - Energieressourcen KW - Energietechnik KW - Energiewende KW - Umweltmanagement KW - Energy resources KW - Energy system transformation KW - Environmental management KW - Power quality Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-56774 SN - 978-3-940471-34-5 ER - TY - CHAP ED - Schwarz, Harald ED - Janik, Przemyslaw ED - Leonowicz, Zbigniew ED - Gono, Radomir ED - Lehmann, Dirk T1 - 11th EEEIC International Conference on Environment and Electrical Engineering – Student Edition : Wrocław-Ostrava-Cottbus 7th - 12th of May 2012 N2 - In the time of increased awareness about the environment problems by the public opinion and also intensive international efforts to reduce emissions of greenhouse gases, as well increase of the generation of electrical energy to facilitate industrial growth, the conference offers broad contribution towards achieving the goals of diversification and sustainable development. Focus of the student conference is to promote the discussion of views from scientists and students from Wroclaw University of Technology, Technical University of Ostrava and Brandenburg Technical University of Cottbus. The conference offers prominent academics and industrial practitioners from all over the world the forum for discussion about the future of electrical energy and environmental issues and presents a base for identifying directions for continuation of research. KW - Energiequalität KW - Energieressourcen KW - Elektrische Energie KW - Energietechnik KW - Energievorrat KW - Umweltbezogenes Management KW - Energietechnik KW - Energiewende KW - Umweltmanagement KW - Energy resources KW - Energy system transformation KW - Environmental management KW - Power quality Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-56751 SN - 978-3-940471-32-1 ER - TY - CHAP ED - Schwarz, Harald ED - Janik, Przemyslaw ED - Gono, Radomir ED - Lehmann, Dirk T1 - 10th EEEIC International Conference on Environment and Electrical Engineering – Student Edition : Wrocław-Ostrava-Cottbus 17th – 21st of May 2011 N2 - In the time of increased awareness about the environment problems by the public opinion and also intensive international efforts to reduce emissions of greenhouse gases, as well increase of the generation of electrical energy to facilitate industrial growth, the conference offers broad contribution towards achieving the goals of diversification and sustainable development. Focus of the student conference is to promote the discussion of views from scientists and students from Wroclaw University of Technology, Technical University of Ostrava and Brandenburg Technical University of Cottbus. The conference offers prominent academics and industrial practitioners from all over the world the forum for discussion about the future of electrical energy and environmental issues and presents a base for identifying directions for continuation of research. KW - Energiequalität KW - Energieressourcen KW - Elektrische Energie KW - Energietechnik KW - Energievorrat KW - Umweltbezogenes Management KW - Energietechnik KW - Energiewende KW - Umweltmanagement KW - Energy resources KW - Energy system transformation KW - Environmental management KW - Power quality Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-56747 SN - 978-3-940471-31-4 ER - TY - CHAP ED - Schwarz, Harald ED - Janik, Przemyslaw ED - Gono, Radomir ED - Lehmann, Dirk T1 - 12th EEEIC International Conference on Environment and Electrical Engineering – Student Edition : Wrocław-Ostrava-Cottbus 20th - 25th of May 2013 N2 - In the time of increased awareness about the environment problems by the public opinion and also intensive international efforts to reduce emissions of greenhouse gases, as well increase of the generation of electrical energy to facilitate industrial growth, the conference offers broad contribution towards achieving the goals of diversification and sustainable development. Focus of the student conference is to promote the discussion of views from scientists and students from Wroclaw University of Technology, Technical University of Ostrava and Brandenburg Technical University of Cottbus. The conference offers prominent academics and industrial practitioners from all over the world the forum for discussion about the future of electrical energy and environmental issues and presents a base for identifying directions for continuation of research. KW - Elektrische Energie KW - Energietechnik KW - Energievorrat KW - Umweltbezogenes Management KW - Energiequalität KW - Energieressourcen KW - Energietechnik KW - Energiewende KW - Umweltmanagement KW - Energy resources KW - Energy system transformation KW - Environmental management KW - Power quality Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-56765 SN - 978-3-940471-33-8 ER - TY - CHAP ED - Schwarz, Harald ED - Janik, Przemyslaw ED - Gono, Radomir ED - Lehmann, Dirk T1 - 18th EEEIC International Conference on Environment and Electrical Engineering – Student Edition : Cottbus Ostrava-Wrocław 11th – 14th of June 2019 N2 - In the time of increased awareness about the environment problems by the public opinion and also intensive international efforts to reduce emissions of greenhouse gases, as well increase of the generation of electrical energy to facilitate industrial growth, the conference offers broad contribution towards achieving the goals of diversification and sustainable development. Focus of the student conference is to promote the discussion of views from scientists and students from Wroclaw University of Technology, Technical University of Ostrava and Brandenburg University of Technology Cottbus-Senftenberg. The conference offers prominent academics and industrial practitioners from all over the world the forum for discussion about the future of electrical energy and environmental issues and presents a base for identifying directions for continuation of research. KW - Energy resources KW - Energy system transformation KW - Elektrische Energie KW - Energietechnik KW - Energievorrat KW - Umweltbezogenes Management KW - Environmental management KW - Power quality KW - Energiequalität KW - Energieressourcen KW - Energietechnik KW - Energiewende KW - Umweltmanagement Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-57144 ER - TY - THES A1 - Engelbrecht, Daniel T1 - Untersuchung der Potentiale und Anforderungen an ein Wirkleistungsmanagement im Verteilnetz mit hohem Anteil von dezentralen Erzeugungsanlagen T1 - Study of the potentials and requirements for an Active Power Management in the distribution system with high propotion of regenerative generation units N2 - In der Dissertation werden neue Potentiale und Anforderungen sowie neue Verfahren und Methoden zur Bereitstellung von Systemdienstleistungen erarbeitet. Der Fokus wird dabei auf das Wirkleistungsmanagement im Verteilnetz gelegt. Bei einer zunehmenden Durchdringung von Erneuerbaren Energien steigt der gegenseitige Einfluss mit den technischen Systemen im Netzbetrieb und bestehenden sowie zukünftigen Märkten. In der Arbeit werden organisatorische und technische Lösungen entwickelt, welche eine sichere Bereitstellung von Regelleistung sowie eine Unterstützung durch den Verteilnetzbetreiber für ein systemdienliches Engpassmanagement des Übertragungsnetzbetreibers ermöglichen. Anhand eines 110-kV-Modellnetzes werden die technischen Lösungen aufgezeigt und bewertet. Dabei zeigt sich, dass eine erweiterte Betriebsplanung im Verteilnetz notwendig wird. Mögliche Konflikte können im Vorfeld durch eine Netzzustandsbewertung und Informationsübermittlung gelöst werden. Weiterhin können Anforderungen des ÜNB zur Unterstützung zum Redispatch im Rahmen einer Vortagesplanung integriert werden. Zur Realisierung der Prozesse und somit Erfüllung der neuen Anforderungen sind zum Teil technische Ände-rungen in den Systemen der Netzführung sowie organisatorische und rechtliche Anpassungen in der Handhabung des Engpassmanagements notwendig. Hierzu werden in der vorliegenden Arbeit konkrete Empfehlungen ausgesprochen. N2 - This thesis presents new potentials and requirements as well as procedures and methods for provision of ancillary services in an electrical system. The focus of the thesis is the Active Power Management in the distribution system. With increasing penetration of renewable energies, the mutual influence of technical systems in the system operation and existing and future markets increases. In this thesis, organizational and technical solutions are developed which enable a secure supply of control power and support from the distribution system operator for a congestion management of the transmission system. Elaborated technical solutions are presented and evaluated using the 110-kV network model. The results of the network simulation show that an extended operational planning is necessary in the operation of the distribution system. Possible can be solved in a forecast process with a network status evaluation and provision of information. Furthermore, requirements of the TSO regarding a support of the Redispatch can be integrated into a forecast process of the system operation of the distribution system. For the realization of the process and to fulfill the new requirements, some technical changes are required in the network operation systems as well as organizational and legal adaptations for the application of the congestions management. In this regard, concrete recommendations are made in this thesis. KW - Wirkleistungsmanagement KW - Verteilnetz KW - Erneuerbare Energien KW - Regelleistung KW - Redispatch KW - Active power management KW - Distribution system KW - Control power KW - Redispatch KW - Renewable energy KW - Lastverteilung KW - Erneuerbare Energien KW - Wirkleistung KW - Verteilungsnetz Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-43479 ER - TY - CHAP ED - Schwarz, Harald ED - Janik, Przemyslaw ED - Leonowicz, Zbigniew ED - Gono, Radomir ED - Lehmann, Dirk T1 - 11th EEEIC International Conference on Environment and Electrical Engineering – Student Edition : Wrocław-Ostrava-Cottbus 7th - 12th of May 2012 N2 - In the time of increased awareness about the environment problems by the public opinion and also intensive international efforts to reduce emissions of greenhouse gases, as well increase of the generation of electrical energy to facilitate industrial growth, the conference offers broad contribution towards achieving the goals of diversification and sustainable development. Focus of the student conference is to promote the discussion of views from scientists and students from Wroclaw University of Technology, Technical University of Ostrava and Brandenburg Technical University of Cottbus. The conference offers prominent academics and industrial practitioners from all over the world the forum for discussion about the future of electrical energy and environmental issues and presents a base for identifying directions for continuation of research. KW - Energy resources KW - Energy system transformation KW - Environmental management KW - Power quality KW - Energiequalität KW - Energieressourcen KW - Energietechnik KW - Energiewende KW - Umweltmanagement KW - Umweltbezogenes Management KW - Energievorrat KW - Elektrische Energie KW - Energietechnik Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-42645 SN - 978-3-940471-32-1 ER - TY - CHAP ED - Schwarz, Harald ED - Janik, Przemyslaw ED - Gono, Radomir ED - Lehmann, Dirk T1 - 13th EEEIC International Conference on Environment and Electrical Engineering – Student Edition : Wrocław-Ostrava-Cottbus 19th - 23rd of May 2014 N2 - In the time of increased awareness about the environment problems by the public opinion and also intensive international efforts to reduce emissions of greenhouse gases, as well increase of the generation of electrical energy to facilitate industrial growth, the conference offers broad contribution towards achieving the goals of diversification and sustainable development. Focus of the student conference is to promote the discussion of views from scientists and students from Wroclaw University of Technology, Technical University of Ostrava and Brandenburg Technical University of Cottbus. The conference offers prominent academics and industrial practitioners from all over the world the forum for discussion about the future of electrical energy and environmental issues and presents a base for identifying directions for continuation of research. KW - Energy resources KW - Energy system transformation KW - Environmental management KW - Power quality KW - Energiequalität KW - Energieressourcen KW - Energietechnik KW - Energiewende KW - Umweltmanagement KW - Umweltbezogenes Management KW - Energievorrat KW - Elektrische Energie KW - Energietechnik Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-42660 SN - 978-3-940471-34-5 ER - TY - CHAP ED - Schwarz, Harald ED - Janik, Przemyslaw ED - Gono, Radomir ED - Lehmann, Dirk T1 - 12th EEEIC International Conference on Environment and Electrical Engineering – Student Edition : Wrocław-Ostrava-Cottbus 20th - 25th of May 2013 N2 - In the time of increased awareness about the environment problems by the public opinion and also intensive international efforts to reduce emissions of greenhouse gases, as well increase of the generation of electrical energy to facilitate industrial growth, the conference offers broad contribution towards achieving the goals of diversification and sustainable development. Focus of the student conference is to promote the discussion of views from scientists and students from Wroclaw University of Technology, Technical University of Ostrava and Brandenburg Technical University of Cottbus. The conference offers prominent academics and industrial practitioners from all over the world the forum for discussion about the future of electrical energy and environmental issues and presents a base for identifying directions for continuation of research. KW - Umweltbezogenes Management KW - Energievorrat KW - Elektrische Energie KW - Energietechnik KW - Energy resource KW - Energy system transformation KW - Environmental management KW - Power quality KW - Energiequalität KW - Energieressource KW - Energietechnik KW - Energiewende KW - Umweltmanagement Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-42659 SN - 978-3-940471-33-8 ER - TY - CHAP ED - Schwarz, Harald ED - Janik, Przemyslaw ED - Gono, Radomir ED - Lehmann, Dirk T1 - 10th EEEIC International Conference on Environment and Electrical Engineering – Student Edition : Wrocław-Ostrava-Cottbus 17th – 21st of May 2011 N2 - In the time of increased awareness about the environment problems by the public opinion and also intensive international efforts to reduce emissions of greenhouse gases, as well increase of the generation of electrical energy to facilitate industrial growth, the conference offers broad contribution towards achieving the goals of diversification and sustainable development. Focus of the student conference is to promote the discussion of views from scientists and students from Wroclaw University of Technology, Technical University of Ostrava and Brandenburg Technical University of Cottbus. The conference offers prominent academics and industrial practitioners from all over the world the forum for discussion about the future of electrical energy and environmental issues and presents a base for identifying directions for continuation of research. KW - Energy resources KW - Energy system transformation KW - Environmental management KW - Power quality KW - Energiequalität KW - Energieressourcen KW - Umweltmanagement KW - Energiewende KW - Energietechnik KW - Umweltbezogenes Management KW - Energievorrat KW - Elektrische Energie KW - Energietechnik Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-42637 SN - 978-3-940471-31-4 ER - TY - CHAP ED - Schwarz, Harald ED - Janik, Przemyslaw ED - Gono, Radomir ED - Lehmann, Dirk T1 - 14th EEEIC International Conference on Environment and Electrical Engineering – Student Edition : Wrocław-Ostrava-Cottbus 8th – 12th of June 2015 N2 - In the time of increased awareness about the environment problems by the public opinion and also intensive international efforts to reduce emissions of greenhouse gases, as well increase of the generation of electrical energy to facilitate industrial growth, the conference offers broad contribution towards achieving the goals of diversification and sustainable development. Focus of the student conference is to promote the discussion of views from scientists and students from Wroclaw University of Technology, Technical University of Ostrava and Brandenburg Technical University of Cottbus. The conference offers prominent academics and industrial practitioners from all over the world the forum for discussion about the future of electrical energy and environmental issues and presents a base for identifying directions for continuation of research. KW - Energy resources KW - Energy system transformation KW - Environmental management KW - Power quality KW - Energiequalität KW - Energieressourcen KW - Energietechnik KW - Energiewende KW - Umweltmanagement KW - Umweltbezogenes Management KW - Energievorrat KW - Elektrische Energie KW - Energietechnik Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-42675 SN - 978-3-940471-35-2 ER - TY - CHAP ED - Schenk, Mario ED - Janik, Przemysław ED - Michalec, Łukasz ED - Lehmann, Dirk T1 - 24th EEEIC International Conference on Environment and Electrical Engineering – Student Edition : Wrocław - Ostrava - Cottbus, June 2025 N2 - In a time of growing public awareness of environmental challenges, intensified international efforts to reduce greenhouse gas emissions, and the increasing demand for electrical energy to support industrial growth, this conference makes a significant contribution to advancing the goals of diversification and sustainable development. The primary aim of the student conference is to foster dialogue among scientists and students from Wroclaw University of Technology, the Technical University of Ostrava, and Brandenburg University of Technology Cottbus-Senftenberg. This conference serves as a unique educational opportunity, encouraging students to author scientific papers, deliver presentations, and engage in discussions about future developments. It is an integral part of the curriculum, offered as an elective module and complemented by a technical excursion. KW - Elektrische Energie KW - Energietechnik KW - Energievorrat KW - Umweltbezogenes Management KW - Energiequalität KW - Energieressourcen KW - Energietechnik KW - Energiewende KW - Umweltmanagement KW - Energy ressources KW - Energy system transformation KW - Environmental management KW - Power quality Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-72596 ER -