TY - THES A1 - Helbron, Hendrike T1 - Strategic environmental assessment in regional land use planning : indicator system for the assessment of degradation of natural resources and land uses with environmental potential for adaption to global climate change (LUCCA) T1 - Strategische Umweltprüfung in der Regionalplanung : Indikatorensystem für die Bewertung der Degradation natürlicher Ressourcen und von Flächennutzungen mit Umweltpotenzial für die Anpassung an den globalen Klimawandel (LUCCA) N2 - Strategic Environmental Assessment in regional land use planning (here: SEA-REP) is a systematic process in Germany, which aims at an optimisation of the integration of environmental policies into decision-making at regional scale. It therefore plays an essential role for the comparison of site alternatives, and the implementation of mitigation and adaptation measures of negative effects of both regional development and climate change. Significant findings and personal experiences gained in an INTERREG project (‛transSEA’) created a fundamental basis for this doctoral research. The main objective was to develop the ‛LUCCA’ indicator system, which is a result of an analysis of land use types, that are increasingly important for effects of global climate change, and should therefore adapt to future conditions with regional land use planning. This system was developed from current German practice of the methodological application of SEA-REP in the core assessment of site-specific impacts on the affected area and impact zone. Main objectives were to integrate spatial effects of climate change into SEA-REP, and to develop a method to make particularly the tendency of physical degradation of natural resources in a region transparent. The research was based on a comprehensive analysis of best practice of SEA and assessment methods applied in German case studies of regional land use planning. Proposed was a a two-tiered environmental baseline- and objective-led approach of impact assessment. Its first tier is a site-specific assessment of significant impacts of regional plan designations and their alternatives. An environmental conflict analysis has the aim to apply assessment thresholds of conflict intensity for each impact factor affecting the importance of assessed components of LUCCA. Results are three classes of conflict intensity, which were determined and can be measured with the help of state indicators, impact indicators and assessment thresholds. 12 LUCCA indicators were defined in connection to regional environmental orientation objectives, environmental components, land uses and further criteria for indicator selection. The second tier is represented by an overall strategic assessment of the regional plan and its designation criteria. This assessment additionally considers positive and cumulative impacts, as well as structural alternatives. The result of the research is a standard concept for environmental orientation objectives, guidance indicators and assessment ranges for the LUCCA indicator system. Regional environmental orientation objectives, which represent outcome values of the future state of environment, were derived from existent environmental quality objectives and environmental quality standards. For each LUCCA indicator mitigation and adaptation measures of regional planning and requirements for tiering to SEA of lower land use planning were proposed. Recommendations for vital and critical action are addressed to competent national and regional authorities of spatial and sector planning. These involve the direct integration of concerns of climate change into SEA-REP, the regional operationalisation of environmental objectives for adaptation to climate change, an improved cooperation between spatial and sector planners concerned with the future use of land and resources, and, last but not least, an involvement of the public in the setting of regional objectives for the future state of a region’s environment. Recommendations for the competent national and federal ministries are the integration of substantial standards into legislation, the setting of binding standards for a stricter reduction of land consumption, the determination of clear responsibilities and activities at all planning levels, and the release of guidance for effective regional land use planning practice that enhances adaptation to climate change. The main recommendations for European regional planning bodies are to establish regional environmental objective concepts for SEA-REP, update regional environmental data profiles, apply the SEA-REP+LUCCA indicator system, develop a tiered decision-support system, challenge conventional regional planning, improve cooperation with sector planning and involve the public in the development of adaptation strategies. A recommended adaptation task at regional planning level is the designation of strictly safeguarded priority areas with specific functions of land uses for the mitigation of negative effects of climate change. Such priority areas, which should be area-specifically defined in a regional land use map, should be linked to the implementation of binding adaptation measures in lower land use planning and at project level. An operationalisation of proposed assessment steps will be necessary for the regional-specific geographic and bio-physical conditions of the EU regions. The thesis concludes with future research needs and an outlook on the potential future role of SEA-REP. A clear responsibility of the future tasks of SEA-REP and LUCCA was recognised as a formal driving force for adaptation of land use to effects of climate change. Improved knowledge on spatial effects of climate change and vulnerability assessments will be required for an effective revision and application of SEA-REP and LUCCA. SEA should gain further importance in a transparent and participative decision-making. Environmental concerns and the protection of LUCCA will have to gain more weight, if the significance of danger and harm, caused by effects of climate change and anthropogenic land degradation, shall be mitigated now and in the future. N2 - Die Strategische Umweltprüfung (SUP) in der Regionalplanung (hier: SEA-REP) ist ein systematisches Verfahren in Deutschland, das eine Optimierung der Integration von Umweltzielen in die Entscheidungsfindung auf regionaler Planungsebene zum Ziel hat. Sie spielt daher eine wesentliche Rolle im Alternativenvergleich und der Umsetzung von Vermeidungs- und Anpassungsmaßnahmen an negative Auswirkungen von sowohl regionaler Entwicklung, als auch des Klimawandels. Bedeutende Ergebnisse und persönliche Erfahrungen, die in einem INTERREG Projekt (‛transSEA’) gewonnen wurden, bilden eine grundlegende Basis für die Dissertation. Das Ergebnis dieser Dissertation ist die Entwicklung des ‛LUCCA’ Indikatorensystems. Es ergibt sich aus einer Analyse bedeutender Flächennutzungen, deren Funktionszuweisung durch Effekte des Klimawandels an Bedeutung zunehmen wird, und die daher gezielt durch Planung anzupassen sind. Das System wird aus aktueller deutscher Praxis der methodischen Anwendung von SEA-REP in der zentralen Bewertung von flächenspezifischen Umweltauswirkungen auf die betroffene Fläche und Wirkzone entwickelt. Hauptziele sind die Integration räumlicher Auswirkungen des Klimawandels in die SEA-REP und die Entwicklung einer Methode, die insbesondere die Tendenz in einer Region hinsichtlich der physikalischen Degradation der Umweltschutzgüter transparent macht. Die Untersuchung basiert auf einer umfangreichen Analyse von ‛best practice’ SUP Verfahren, sowie auf Bewertungsmethoden, die in deutschen Fallbeispielen der Regionalplanung angewandt wurden. Vorgeschlagen wird ein zweistufiger Ansatz zur Umweltprüfung, der sich durch einen starken Bezug zu Schutzgütern und Umweltzielen auszeichnet. Die erste Stufe bildet eine flächenspezifische Prüfung erheblicher Umweltauswirkungen durch regionalplanerische Flächenausweisungen mit ihren Alternativen. Das Ziel der Umweltkonfliktanalyse ist, für jeden Wirkfaktor, der die flächenbezogen bewertete Bedeutung von LUCCA als Umweltschutzbelang beeinträchtigt, Bewertungsmaßstäbe der Konfliktintensität anzuwenden. Ergebnisse sind drei Klassen der Konfliktintensität, die mit Hilfe von Zustandsindikatoren (‛state indicators’), Wirkungsindikatoren (‛impact indicators’) und Bewertungsmaßstäben bestimmt und gemessen werden können. 12 LUCCA Indikatoren werden in Verbindung zu regionalen Umweltorientierungszielen, Schutzbelangen, Flächennutzungen und weiteren Kriterien für die Indikatorenauswahl definiert. Die zweite Stufe wird durch eine Gesamtbewertung des Regionalplans und seine Ausweisungskriterien repräsentiert. In diesem Prüfungsschritt werden zusätzlich positive und kumulative Auswirkungen, sowie Strukturalternativen geprüft. Das Ergebnis der Forschung ist ein standardisiertes Konzept mit ‛Umweltorientierungszielen’, Leitindikatoren und Bewertungskorridoren für das LUCCA Indikatorensystem. Umweltorientierungsziele für die regionale Planungsebene, die Ergebniswerte für den zukünftigen Zustand der Umwelt repräsentieren, werden von bestehenden Umweltqualitätszielen und Umweltqualitätsstandards abgeleitet. Für jeden LUCCA Indikator werden Vermeidungs- und Anpassungsmaßnahmen für die Regionalplanung und Anforderungen für die Abschichtung auf die untere Ebene der Flächennutzungsplanung vorgeschlagen. Eine Optimierung des Regionalplanentwurfs während des SUP Verfahrens und die endgültige Entscheidungsfindung erfordern eine verbesserte Transparenz der zu integrierenden Auswirkungen des Klimawandels. Empfehlungen für entscheidende und kritische Handlungen werden an zuständige nationale und regionale Behörden der Raum- und Fachplanungen adressiert. Diese umfassen eine direkte Integration des Klimawandels in die SEA-REP, die regionale Operationalisierung von Umweltzielen für die Anpassung an den Klimawandel, eine verbesserte Kooperation zwischen Raum- und Fachplanern, die zuständig sind für die Planung der zukünftigen Nutzung von Fläche und Ressourcen, und nicht zuletzt eine Beteiligung der Öffentlichkeit bei der Festsetzung regionaler Ziele für den zukünftigen Umweltzustand in einer Region. Nationalen und föderalen zuständigen Ministerien wird die Integration von materiellen Standards in bestehende Gesetze empfohlen. Verbindliche Standards für eine strengere Reduzierung des Flächenverbrauchs sollen festgesetzt werden. Klare Verantwortlichkeiten und Aktivitäten auf allen Planungsebenen sind zu bestimmen, sowie Richtlinien zu einer guten regionalplanerischen Praxis zu veröffentlichen. Wesentliche Empfehlungen für europäische Regionalplanungsbehörden sind die Erstellung eines Konzepts für regionale Umweltziele für die SUP in der Regionalplanung, die Aktualisierung regionaler Umweltdatenprofile, die Anwendung der SUP in der Regionalplanung mit den LUCCA Indikatoren, die Entwicklung eines abschichtenden Entscheidungsfindungssystems, die Herausforderung der konventionellen Regionalplanung, die Verbesserung der Kooperation mit Fachplanungen und die Einbeziehung der Öffentlichkeit in die Aufstellung von Anpassungsstrategien. Es sollen auf regionaler Planungsebene streng geschützte Vorranggebiete mit spezifischer Funktion der Flächennutzungen für die Verminderung der Erheblichkeit negativer Beeinträchtigungen des Klimawandels ausgewiesen werden. Solche Vorranggebiete sollen an die Umsetzung verbindlicher Anpassungsmaßnahmen in der Flächennutzungsplanung gebunden werden. Es ist erforderlich, dass die regionale Planungsbehörde die vorgeschlagenen Prüfschritte für die regionalspezifischen geographischen und bio-physikalischen Gegebenheiten operationalisiert. Abschließend werden Vorschläge zum zukünftigen Forschungsbedarf und ein Ausblick auf das zukünftige Potenzial der SUP in der Regionalplanung gemacht. Verbesserte Umweltdaten über raumbedeutsame Auswirkungen des Klimawandels und eine Bewertung der Empfindlichkeiten sind für die Anwendung und Weiterentwicklung der SEA-REP und LUCCA erforderlich. Zusätzlich muss die Beteiligung der Öffentlichkeit in der SUP mehr Bedeutung erlangen und die Beschlussfassung dadurch transparenter werden. In der regionalplanerischen Abwägung benötigen Umweltbelange und der Schutz von LUCCA mehr Gewicht, wenn durch Effekte des Klimawandels und durch anthropogene Flächendegradation entstehende Gefährdungen und Schäden jetzt und zukünftig vermieden werden sollen. KW - Umweltverträglichkeitsprüfung KW - Raumordnung KW - Klimaänderung KW - Risikoanalyse KW - Bewertungssystem KW - Strategische Umweltprüfung KW - Raumplanung KW - Klimawandel KW - Risikoanalyse KW - Bewertungsmethoden KW - Strategic environmental assessment KW - Land use planning KW - Climate change KW - Risk analysis KW - Assessment methods Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus-5848 ER - TY - THES A1 - Dirnberger, Herbert T1 - Eine systemorientierte Managementmethode für Consulting-Unternehmen im Bauwesen T1 - A system-oriented management method for consulting-firms in the building industry N2 - Die Arbeit überträgt Grundgedanken und Hilfsmittel der systemorientierten Managementlehre (Universität St. Gallen, Malik Management Zentrum St. Gallen) auf die Branche der Consulting - Unternehmen im Bauwesen (CUB) in Deutschland, die im Jahr 2006 mit 86 Tsd. Firmen und über 360 Tsd. Mitarbeitern einen Umsatz von über 30 Mrd. € erwirtschaftet hat. Erörtert werden die zum Verständnis der eingesetzten Denkweisen und Konzepte notwendigen Grundlagen der Begriffe und Definitionen von ‚System’, Kybernetik und Systemtheorie.Es werden vor allem das zirkuläre und vernetzte Denken, Regelkreise und deren hierarchischer Aufbau, die Rückkopplung, die ‚Black box’, die Bedeutung des Ausbalancierens von Maßnahmen, Modellbildungen für unterschiedliche Fragestellungen der Unternehmenspolitik, die Möglichkeiten der Selbstorganisation und die bedingte Autonomie von Unternehmensteilen erläutert. Als Werkzeuge werden das Viable System Modell (VSM) nach Stafford Beer und Wirkungsgefüge nach Frederik Vester und Gomez/Probst (Universität St. Gallen) eingesetzt. Das VSM liefert eine übergeordnete Orientierung zur Integration grundlegender Anforderungen der Unternehmensführung und gleichzeitig konkrete Anweisungen zur Ausbildung aller Funktionen des Organismus Unternehmen. Wirkungsdiagramme bilden Zusammenhänge des »Systems« CUB oder formulierte Fragestellungen in der gewünschten Detaillierungsebene ab. Bestehende Wirkungen und mögliche Konsequenzen von Aktivitäten und Einflüssen können mit ihrer Hilfe bis zu einem gewissen Grad nachvollzogen bzw. vorausgedacht werden. Das Verfahren »Easy Fuzzy Balancing« wird vom Verfasser ausgearbeitet, um Entscheidungssituationen, z.B. bei strategischen Überlegungen, nachvollziehbar aufzubereiten. Es kombiniert den einfachen Aufbau der Nutzwertanalyse mit der Denkweise von Fuzzy – Logic und setzt diese mit grundlegender Mathematik um. Aus der Diskussion vorhandener Lösungen wie der Balanced Scorecard wird ein »Kennzahlensystem« entwickelt, welches eine ausgewogene, die Vergangeheit, Gegenwart und Zukunft berücksichtigende sowie vollständig alle erforderlichen Bereiche und Prozesse abdeckende Analyse möglich macht. Mit Hilfe von »Easy Fuzzy Balancing« werden die Ergebnisse zu einem »Index Gesamterfolg« verdichtet. Auf Basis dieser Konzepte und Hilfsmittel wird eine »Methode« vorgestellt, die umfassend und auf die Branche zugeschnitten die Aufgaben der Unternehmensplanung, -führung und Weiterentwicklung eines CUB abbildet. Dazu werden branchenspezifische Hilfsmittel, wie beispielsweise ein »Strategieprozess« und ein »Strategisches Koordinatensystem CUB«, welches zur Orientierung im Markt genutzt wird, vorgestellt. Das Hauptaugenmerk wird immer wieder auf die Fähigkeiten und die Anforderungen bei der Erbringung der Dienstleistung eines CUB gerichtet. An der Schnittstelle zum Projekt, im Zusammenwirken mit den besonderen und einmaligen Bedingungen eines Bauvorhabens entsteht Komplexität. Die Fähigkeiten im Umgang mit diesen nur teilweise planbaren Zuständen stellt die wesentliche Führungsaufgabe und den bedeutendsten Erfolgsfaktor eines CUB dar. Die Verantwortung des Projektleiters und seine zur erfolgreichen Projektabwicklung erforderlichen Fähigkeiten werden herausgearbeitet. Der Einsatz der systemorientierten Grundgedanken und Werkzeuge sowie der branchenspezifischen Hilfsmittel werden jeweils an Beispielen aus der Beratungspraxis gezeigt. Als Ergebnis liegt eine »Methode« vor, die Hinweise statt Rezepte liefert und im Unternehmen an die besonderen Anforderungen und Randbedingungen angepasst wird. N2 - This study applies basic ideas and tools of system-oriented management studies (University of St. Gallen, Malik Management Zentrum St. Gallen) to the trade of consulting-firms in the German building industry (CUB). This branch of business covers about 86 thousand companies with more than 360 thousand employees, and in 2006 generated a turnover of more than 30 billion €. For a better understanding of the concepts and ways of thinking applied in this study necessary fundamentals are being discussed which explain the terms ‘system’, ‘’cybernetics and ‘systems theory’ and their definitions. Above all the concept of circular and interconnected thinking, control loops and their hierarchical design are illustrated as well as feed-back loops, the ;black box’, the importance of balancing corporate activities, the forming/creation of models as an answer to various questions concerning company policy, possibilities of self-organisation and the limited autonomy of company units. The Viable System Model (VSM) according to Stafford Beer and effect systems (the model of a complex problem showing the linked loops of its variables) according to Frederik Vester and Gomez/Probst (University of St. Gallen) are used as tools in this approach. The VSM provides the superordinate orientation for integrating basic requirements of corporate management and at the same time gives concrete instructions for designing all the different functions of the corporation as an organism. Effect systems illustrate the connections of the »system« CUB or picture clearly defined questions in the desired level of detail. With their help existing effects and possible consequences of activities and influences can be understood or even anticipated to a certain degree. The method of »Easy Fuzzy Balancing« is created by the author in order to prepare decision-making - for example in strategic considerations – in a transparent way. It combines the simple structure of a utility analysis with the way of thinking of Fuzzy-Logic and operates with very basic mathematics. By discussing existing solutions such as the Balanced Scorecard a specific »Kennzahlensystem« (performance measurement system) is developed, which allows a balanced analysis of all necessary areas and functions of a corporation, an analysis which covers past, present and future aspects. With the help of “Easy Fuzzy Balancing” the results of this analysis can be condensed into an >>Index Gesamterfolg<< (Index of overall performance). Based on the above mentioned concepts and tools a comprehensive »Methode« (method) is presented, which is especially designed for this branch and which fully maps the tasks of corporate planning, management and development of a CUB. For this purpose tools are presented which are specific for this trade, such as a »Strategieprozess« (strategy process) and a »Strategisches Koordinatensystem CUB« (Stratetic Coordinate System), which is used for orientation in the market. The main focus is consistently directed towards the skills and requirements needed for providing the consultative and designing services of a CUB. Complexity arises at the interface to the project, through interrelation with the special and unique conditions of a construction project. Skills in dealing with these situations, that can only be planned to a certain degree, constitute the fundamental task of management and the most crucial element of success of a CUB. The responsibility of the project manager and his skills needed for a successful handling of a project are furthermore elaborated. The use of system-oriented ideas and implements as well as tools specific to this branch are illustrated through examples taken from consulting practice. As a result a »Methode« (method) is presented which provides hints instead of exact formulas, and which has to be adjusted to the specific requirements and conditions of a particular corporation. KW - Deutschland KW - Bauwirtschaft KW - Unternehmensberatung KW - Systemorienterte Managementlehre KW - Bauwirtschaft KW - Ingenieurbüro KW - Architekturbüro KW - System-oriented management studies KW - Building and construction industry KW - Engineering firm KW - Architecture firm Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus-5716 SN - 978-3-00-026448-1 ER - TY - THES A1 - Arguirov, Tzanimir Vladimirov T1 - Electro-optical properties of dislocations in silicon and their possible application for light emitters T1 - Elektro-optischen Eigenschaften von Versetzungen in Silizium und deren mögliche Anwendung für Licht-Emitter N2 - This thesis addresses the electro-optical properties of silicon, containing dislocations. The interest in those properties is driven mainly by two practical reasons. One is the optical characterisation of multicrystalline silicon for solar cells, and the other is the design of light emitting diodes based on silicon by enhancement of silicon radiative properties via introduction of dislocations. The work demonstrates that dislocation specific radiation may provide a means for optical diagnostics of solar cell grade silicon. It provides insight into the mechanisms governing the dislocation recombination activity, their radiation, and how are they influenced by other defects present in silicon. We demonstrate that photoluminescence mapping is useful for monitoring the recombination activity in solar cell grade silicon and can be applied for identification of contaminants, based on their photoluminescence signatures. It is shown that the recombination at dislocations is strongly influenced by the presence of metals at the dislocation sites. The dislocation radiation activity correlates with their electrical activity. Thus, photoluminescence mapping at room temperature may provide a means for revealing and characterising of dislocation-rich regions in multicrystalline silicon. It is shown that the dislocation and band-to-band luminescence are essentially anti-correlated. The band-to-band intensity being related to the diffusion length of minority carriers can be used for measurements of diffusion length, as long as the surface recombination rate is controlled. Moreover, photoluminescence mapping can be used for the detection of optically active defects in solar grade materials. Thus, betaFeSi2 precipitates, with a luminescence at 0.8 eV, were detected within the grains of block cast materials. They exhibit a characteristic feature of quantum dots, namely blinking. The second aspect of the thesis concerns the topic of silicon based light emitters for on-chip optical interconnects. The goal is an enhancement of sub-band-gap or band-to-band radiation by controlled formation of dislocation-rich areas in microelectronics-grade silicon as well as understanding of the processes governing such enhancement. For light emitters based on band-to-band emission it is shown, that internal quantum efficiency of nearly 2 % can be achieved, but the emission is essentially generated in the bulk of the wafer. On the other hand, light emitters utilizing the emission from dislocation-rich areas of a well localized wafer depth were explored. Three different methods for reproducible formation of a dislocation-rich region beneath the wafer surface were investigated and evaluated in view of their room temperature sub-band-gap radiation: (1) silicon implantation and annealing, (2) epitaxially grown SiGe buffer, and (3) direct wafer bonding. The most promising dislocation-based emitter appears the utilization of a dislocation network produced by wafer bonding. It is shown, that monochromatic D1 radiation (wavelength 1.5 µm) can be generated in a well localised depth of the wafer. The radiation is not absorbed in silicon and such localized emitter can, potentially, be coupled with silicon waveguides and Ge-based detectors for optical interconnects. N2 - Diese Dissertation befasst sich mit den elektro-optischen Eigenschaften von Silizium mit Versetzungen. Das Interesse an den Versetzungseigenschaften beruht vor allem auf zwei praktischen Gründen: Die versetzungsspezifische Lumineszenz erlaubt einerseits optische Charakterisierung von multikristallinen Silizium für Solarzellen und anderseits die Entwicklung einer Silizium-basierten Leuchtdiode. Die Arbeit untersucht zunächst den Einsatz der Versetzungs-spezifische Lumineszenz für die optische Diagnostik von multikristallinen (Versetzungsreichen) Silizium für Solarzellen. Sie liefert Erkenntnisse über die Mechanismen für die versetzungsbedingte Rekombination, Versetzungsstrahlung, und darüber, wie diese durch andere Defekte im Silizium beeinflusst werden. Es wird gezeigt, dass Photolumineszenz-Mapping anwendbar ist für eine großflächige Analyse der Rekombination in Solarzellen-Silizium und für die Identifizierung von Verunreinigungen angewendet werden kann. Es wird gezeigt, dass metallische Verunreinigungen starken Einfluss auf die Rekombination im Bereich der Versetzungen haben und dass die Strahlungsaktivität mit ihrer elektrischen Aktivität korreliert. Versetzungs- und Band-Band-Lumineszenz sind im Wesentlichen antikorrelieret. Die Band-Band-Intensität ist abhängig von der Diffusionslänge der Minoritätsladungsträger. Daher kann Band-Band Strahlung als Maß für die Diffusionslänge benutzt werden, sofern die Oberflächenrekombination bekannt ist. Darüber hinaus kann Photolumineszenz-Mapping auch für den Nachweis von optisch aktiven Defekten in Solarzellen-Silizium verwendet werden. So wurden betaFeSi2 Ausscheidungen, mit einer Strahlungsenergie von 0,8 eV, innerhalb der Körner von Blockguss Silizium nachgewiesen. Sie zeigen ein charakteristisches Merkmal von Quantenpunkten, das sogenannte Blinken. Der zweite Aspekt der Forschung steht im Zusammenhang mit der Suche nach Silizium-basierten Licht-Emittern für On-Chip optische Interconnects. Das Ziel ist, durch kontrollierte Bildung von versetzungsreichen Gebieten in der Silizium Wafer eine Erhöhung des Sub-Bandgap oder Band-Band-Strahlung zu erreichen und die Prozesse, welche für eine solche Erhöhung verantwortlich sind zu verstehen. Es wird gezeigt, dass Band-Band Licht-Emittern eine interne Quanten-Effizienz von fast 2% erreichen können, aber die Emission entsteht im Wesentlichen im gesamten Volumen des Wafers. Licht Emitter, welche die Emission von versetzungsreichen Gebieten ausnutzen, können dagegen in einer definierten Tiefenschicht eingeschränkt werden. Drei verschiedene Methoden zur reproduzierbaren Bildung der versetzungsreiche Regionen unterhalb der Wafer-Oberfläche wurden untersucht und im Hinblick auf ihre Raumtemperatur Sub-Bandgap-Strahlung bewertet: (1) Silizium-Implantation und Ausheilen, (2) epitaktisch gewachsene SiGe-Puffer, und (3) direktes Wafer-Bonding. Wafer-Bonding erscheint am besten geeignet für versetzungsbasierte Lichtemitter. Es wird gezeigt, dass monochromatische D1-Strahlung (Wellenlänge 1,5 mm) erzeugt werden kann in einer gut lokalisierten Tiefe der Wafer. Die Strahlung wird nicht in Silizium absorbiert und solche lokalisierten Emitter sind möglicherweise geeignet für die Kopplung mit einem Silizium-Wellenleiter und Ge-Detektor für eine optische Interconnects. KW - Silicium KW - Versetzung KW - Lumineszenz KW - Lumineszenz KW - Versetzungen KW - Silizium KW - Luminescence KW - Dislocations KW - Silicon Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus-5837 ER - TY - THES A1 - Karacoglu, Meline T1 - Erfolgsfaktor Gründungscontrolling T1 - Controlling of the foundationprocess as success factor N2 - Die zahlreichen empirischen Studien der Gründungsforschung und insbesondere die Forschung zum Erfolg neugegründeter Unternehmen weisen Schwächen auf, so dass sie nicht ohne weiteres verwertbar sind. Darüber hinaus sind – nach der Grundannahme der Erfolgsfaktorenforschung – die wenigen Determinanten zu bestimmen, welche nicht nur den Unternehmenserfolg nachhaltig beeinflussen, sondern auch die Besonderheiten von Unternehmensgründungen und die Wechselwirkungen zwischen den Erfolgsfaktoren ihrerseits berücksichtigen und auf die unterschiedlichen Lebenszyklusphasen eingehen. Die bisherigen Forschungsergebnisse beziehen sich lediglich auf den gesamten Lebenszyklus des Unternehmens, so dass diese nicht ohne weiteres auf alle Unternehmen angewendet werden können. In der ausführlichen Diskussion um die Problematik der wenigen relevanten Erfolgsfaktoren steht die Unternehmensplanung im Mittelpunkt des Gründungs- und Wachstumsprozesses. Sie ermöglicht die Integration der spezifischen Eigenschaften des Gründers sowie des zu gründenden Unternehmens mit seiner spezifischen Umwelt. Sie ist die Informations-, Kommunikations- und Handlungsgrundlage für die Beteiligten, in der der jeweilige aktuelle Stand und die strategische Zielsetzung des Unternehmens darzustellen ist. Diese dynamische Anpassung der Unternehmensplanung auf die Marktänderungen zur richtigen Zeit besitzt eine besondere Bedeutung für das Überleben und die wirtschaftliche Entwicklung des neugegründeten Unternehmens. Um die erforderlichen dynamischen Anpassungen - operativ und strategisch - an die Umweltveränderungen durchführen zu können und die Wachstumspotentiale des Unternehmens zu verbessern, ist ein sinnvolles und adäquates Controllingsystem unverzichtbar. Zu diesem adäquaten Controllingsystem gehört die „Balanced Scorecard“, mit deren Hilfe die operativen Ziele aus den strategischen Zielen abgeleitet werden. Die Balanced Scorecard – als strategisches Kennzahlen- bzw. Managementsystem – eliminiert nicht nur mehrere Nachteile traditioneller Kennzahlensysteme, sondern macht auch die Vision und die Ziele des Unternehmens konsequent messbar und somit nachvollziehbar auf allen Ebenen. N2 - Most of the empirical studies of the foundation research and specially the research for the success of new founded firms are riddled with weakness. Regarding gaps these studies are not easily useable. According to the basic supposition of the success-factor-research, there are few determinants that have to be fixed. These determinants influence the success of a firm. Over and above the special quality of the firm foundation and the interaction between the success factors have to be considered. One has to recognize the different lifecycle phases. The latest results refer only to the total lifecycle. That’s why it would be difficult to use them for all firms and for the prevailing lifecycle phases. By a detailed discussion about the less relevant success factor the firm planning stands in the centre of the establishment- and development process, It makes the integration of the special characteristics of the new founded firm and its special environment possible. This is an information, communication and action basic for all the persons involved. The current state and the strategic targets of the firm have to be interpreted in the firm plan. This dynamic adaptation of the firm planning with a right timing in reaction to the market modifications has a special meaning for the new founded firm to survey and to develop financially. An appropriate and adequate controlling system is important so that one can be able to operate with dynamic adaptation-operative and strategic- to the environment modification and to improve the expansion potential of the firm. The „balanced score card“belongs to this adequate controlling system. The operative targets will be derived from the strategic ones with its assistance. The „balanced score card“as a strategic management system eliminates the disadvantages of the traditional number systems like reference number systems. It makes also the vision and the targets of the foundation consistently measurable. And this is how they become comprehensible in all levels. KW - Unternehmensgründung KW - Controlling KW - Gründungscontrolling KW - Erfolgsfaktoren KW - Unternehmensplanung KW - Gründungsforschung KW - Balanced scorecard KW - Controlling the process of the foundation KW - Success factors KW - Research of foundation KW - Business planning KW - Balanced scorecard Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus-5802 ER - TY - JOUR T1 - Mitteilungen : Amtsblatt der BTU Cottbus, 2008,24 (17.11.2008) N2 - Satzung zur Änderung der Prüfungs- und Studienordnung für den Master-Studiengang World Heritage Studies vom 28. August 2008 Neubekanntmachung: Prüfungs- und Studienordnung für den Master-Studiengang World Heritage Studies vom 28. August 2008 (Ersetzt durch AMbl 12/2021) T3 - Mitteilungen : Amtsblatt der BTU Cottbus - 2008, H.24 Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus-5822 ER - TY - THES A1 - Hannebauer, Dina T1 - Zur Querschnitts- und Stabtragfähigkeit von Trägern mit profilierten Stegen T1 - Bearing capacity of girders with corrugated webs N2 - In der vorliegenden Arbeit werden das Stabilitätsverhalten und dessen Einfluss auf die Querschnitts- und Stabtragfähigkeit von Trägern mit profilierten Stegen umfassend untersucht. Die gewählten Parametergrenzwerte orientieren sich am derzeitigen Anwendungsbereich stegprofilierter Träger. Es werden ausschließlich sinus- und trapezförmige Profilierungen untersucht. Die Arbeit leistet einen Beitrag, dem Anwender das Tragverhalten unterschiedlicher Profilierungen aufzuzeigen und gleichzeitig abzugrenzen. Ein gezielter Einsatz der derzeit auf dem Stahlleichtbaumarkt existierenden Trapez- und Wellstegträger wird ermöglicht. Erhöhte Wettbewerbschancen sind eine Folge. Die Ergebnisse der experimentellen und numerischen Untersuchungen zum lokalen Stabilitätsverhalten des Stegbleches bei Querkraftbeanspruchung tragen zu einem besseren Verständnis über das Tragverhalten bei und erlauben eine Weiterentwicklung des mehrfach diskutierten Interaktionsmodells zur Querkrafttragfähigkeit. Umfangreiche Parameterstudien zeigen, dass die Profilierungsform (trapez- bzw. sinusförmig) sowie die Parameter Wellenamplitude und –länge die Tragmechanismen bestimmen. Die Interaktion des lokalen und globalen Beulens wird dabei mit einer Beulspannung für zonales Beulen beschrieben. Auf Grundlage dieser Ergebnisse kann die Tragfähigkeit stegprofilierter Träger besser formuliert werden. Die Abminderungskurven, welche das Nachbeulverhalten sowie Imperfektionen berücksichtigen, werden optimiert. Eine wesentliche Verbesserung der Plateaulängen ist für Träger mit profilierten Stegen gelungen. Des Weiteren wird der Einfluss der lokalen Instabilität des Gurtes biegebeanspruchter Träger untersucht. Im Speziellen werden dabei Einflussparameter des Plattenbeulens untersucht und gezeigt, dass Abweichungen angenommener Beulfeldabmessungen ungünstige Auswirkungen auf das beschriebene Tragverhalten haben. Im Ergebnis der Untersuchungen wird eine Optimierung der anzunehmenden Beulfeldabmessungen für Plattenbeulen vorgeschlagen. Abschließend ergänzen Untersuchungen zum globalen Stabilitätsverhalten der Wellstegträger die grundlegenden Untersuchungen zum Tragverhalten der Wellstegträger und ordnen diese in die bestehenden europäischen Knickspannungslinien ein. N2 - The stability behaviour and its influence on bearing capacity of girders with corrugated webs have been investigated comprehensively within the present paper. The investigated parameters orientate towards current applications of girders with corrugated webs. Only sinusoidal and trapezoidal corrugations are examined. The paper makes a contribution in order to present users differences in load bearing behaviour of corrugated web-girders and distinguish them concurrently. Specific use of presently existing corrugated web-girders becomes possible. Results of experimental and numerical investigations regarding local stability behaviour of webs, which are shear force-loaded have been established. Extensive parameter studies show, that shape of corrugation (trapezoidal and sinusoidal) as well as amplitude and length of corrugation define the load bearing behaviour. The interaction of local and global buckling is expressed with a critical buckling stress for zonal buckling. Based on these results bearing capacity of girders with corrugated webs can be described more precise. In conclusion, reduction factor curves (considering imperfections and post-buckling behaviour) have been improved. A decisive optimization of plateau length has been succeeding for girders with corrugated webs. Additional the local stability behaviour of flanges has been investigated due to flexural loading. Especially the influence parameter of plate buckling has been determined. It could be shown, that variances of assumed buckling field dimensions have unfavourable effects due to common-described load bearing behaviour. Results and improved plate buckling field dimensions have been summarized and suggested. Concluding investigations of the global stability behaviour complete fundamental statements about load bearing behaviour of girders with sinusoidally corrugated webs and integrate them into existing european buckling curves. KW - Stahl KW - Schlankes Bauteil KW - Tragverhalten KW - Stabilität KW - Steg KW - Profilierung KW - Wellstegträger KW - Trapezstegträger KW - Querkrafttragfähigkeit KW - Stabtragfähigkeit KW - Corrugation KW - Sinusoidal KW - Trapezoidal KW - Girder Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus-5734 ER - TY - JOUR T1 - Mitteilungen : Amtsblatt der BTU Cottbus, 2008,23 (10.11.2008) N2 - Neufassung der Prüfungs- und Studienordnung für den Bachelor-Studiengang Informations- und Medientechnik vom 01. Juli 2008 Neufassung der Prüfungs- und Studienordnung für den Master-Studiengang Informations- und Medientechnik vom 01. Juli 2008 (Ersetzt durch AMbl 20/2017) T3 - Mitteilungen : Amtsblatt der BTU Cottbus - 2008, H.23 Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus-5790 ER - TY - JOUR T1 - Mitteilungen : Amtsblatt der BTU Cottbus, 2008,22 (07.11.2008) N2 - Neufassung der Prüfungs- und Studienordnung für den Bachelor-Studiengang Informatik vom 01. Juli 2008 (siehe AMbl 25/2017) Neufassung der Prüfungs- und Studienordnung für den Master-Studiengang Informatik vom 01. Juli 2008 (ersetzt durch Abl 10/2012; siehe dazu AMbl 25/2017) Erste Satzung zur Änderung der Prüfungsordnung des Diplom-Studiengangs Informatik vom 01. Juli 2008 Erste Satzung zur Änderung der Studienordnung des Diplom-Studiengangs Informatik vom 01. Juli 2008 T3 - Mitteilungen : Amtsblatt der BTU Cottbus - 2008, H.22 Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus-5786 ER - TY - THES A1 - Rieper, Felix T1 - On the behaviour of numerical schemes in the low Mach number regime T1 - Über das Verhalten von numerischen Verfahren im Strömungsbereich kleiner Machzahlen N2 - This work is concerned with the study of two-dimensional inviscid flow. The main concern is the so-called "accuracy problem" of first-order upwind schemes in the low Mach number regime. The thesis is divided into two parts. In a preliminary chapter the governing thermodynamic and mechanical equations are introduced. The Navier-Stokes equations for viscous flow are presented because the concepts of fluid viscosity and Reynolds number are later needed in the context of artificial viscosity of numerical schemes. The Euler equations are introduced along with a single-scale asymptotic analysis for small Mach numbers. In the first part the behaviour of various first-order upwind schemes in the low Mach number regime is analysed with respect to a one-dimensional model case, where the two-dimensionality only remains in the shear waves of the local Riemann problem. The concepts of numerical viscosity and numerical Reynolds number are first introduced for the upwind method for the scaler linear advection equation. These concepts are then applied to Roe's scheme and the scheme by Harten-Lax-van Leer (HLL). The aim is to show that the accuracy problem can only be avoided, if all characteristic waves are resolved by the upwind scheme. Otherwise, the artificial viscosity on these waves is of the wrong order of magnitude dx/M and grows with decreasing Mach numbers, instead of being order dx. In the following chapter, various flux vector splitting methods are analysed in this respect. The analysis presented is verified with a number of numerical results. Comparisons with analytical solutions give a direct measure of the accuracy of the scheme; to this end we use the flow around a cylinder. As standard test case the flow around a NACA0012 aerofoil is used. The second part of the thesis is dedicated to two-dimensional flow. The numerical scheme of choice is based on Roe's approximate Riemann solver, which does not show the accuracy problem in the one-dimensional setting. Part II begins with broad numerical studies, which path the way to the analysis by giving answers to the following questions. How does the numerical behaviour of the scheme change, when the cells in a structured, body-fitted grid around a cylinder are continuously transformed from (almost) squares, via trapezoids to triangles? How important is the grid structure to the accuracy problem? Later we restrict the numerical investigations to structured grids with two different cell geometries: squares and rectangular triangles, which originate from the squares by adding a diagonal edge. On these types of finite volume cells the steady flow around a rectangle and the dissipative behaviour of an oblique contact layer is investigated. The moving Gresho vortex is simulated as an example of an unsteady flow simulation. All numerical studies suggest two things: firstly, the accuracy problem is linked to the momentum transport in shear flow and, secondly, this problem is absent if the finite volume cells are of triangular shape -- irrespective of the grid being structured or unstructured. The analysis begins with heuristic considerations. We investigate a special case of a divergence free flow with constant pressure and density on a Cartesian and a related triangular grid. Already here, the different form of the artificial viscosity term on square and triangular finite volume cells becomes evident. On Cartesian grids there is a decoupling of the artificial viscosity into horizontal and vertical direction. For non-trivial velocity fields the viscosity terms of order dx/M cannot vanish and cause the numerical error to grow for decreasing Mach numbers. On triangular grids there is no such decoupling: the artificial viscosity of order dx/M contains all jumps of the normal component of the velocity at the three cell interfaces. This suggests that the accuracy problem is absent because these jumps can completely vanish without constraining the velocity field to a trivial flow. The thesis closes with a proof of this proposal for the Roe scheme for steady low Mach number flow. Using asymptotic analysis of the semi-discrete equations, it is explicitly derived that the accuracy problem is avoided, if the Roe scheme is used on triangular finite volume cells. The accuracy of the scheme is accompanied by a constraint: the normal velocity does not jump at cell interfaces. This constraint leaves enough degrees of freedom for the velocity field as is shown with graph theoretic arguments. N2 - Kern dieser Arbeit sind zweidimensionale reibungsfreie Strömungen. Das Hauptaugenmerk liegt dabei auf dem sogenannten accurcay problem von Upwind-Verfahren erster Ordnung im Bereich kleiner Machzahlen. Die Dissertation ist in zwei Teile untergliedert. In einem einleitenden Kapitel werden die für diese Studie relevanten thermodynamischen und mechanischen Gleichungen eingeführt. Die Konzepte der inneren Reibung in Fluiden und der Reynoldszahl werden später im Kontext von künstlicher Viskosität numerischer Verfahren benötigt. Daher werden die Navier-Stokes Gleichungen für reibungsbehaftete Strömungen zuerst eingeführt. Im Anschluss werden die Eulergleichen und die Ergebnisse der asymptotischen Analyse für kleine Machzahlen vorgestellt. Im ersten Teil der Arbeit werden verschiedene Upwind-Verfahren erster Ordnung hinsichtlich ihres Verhaltens in einer eindimensionalen Modellsituation untersucht, wobei die Zweidimensionalität nur durch die Existenz von Scherwellen in den lokalen Riemannproblemen bestehen bleibt. Das Konzept der numerischen oder künstlichen Viskosität und der numerischen Reynoldszahl wird am Beispiel des Upwind-Verfahrens für die skalare lineare Advektionsgleichung entwickelt. Diese Konzepte werden dann auf das Roe-Verfahren und das Verfahren von Harten, Lax und van Leer (HLL) übertragen. Ziel dieser Analyse ist es zu zeigen, dass im Bereich kleiner Machzahlen ein Upwind-Verfahren alle charakteristischen Wellen auflösen muss, wenn das "accuracy problem" vermieden werden soll. Dieser Aspekt wird im Anschluss für diverse Fluss-Vektor-Splitting Verfahren untersucht. Die Analyse wird mit zahlreichen numerischen Ergebnissen untermauert. Die stationäre Zylinderumströmung wurde als Testfall gewählt, da die analytische Referenzlösung der inkompressiblen Potentialströmung bekannt ist. Als weiteren Testfall untersuchen wir die stationäre Strömung um ein NACA0012 Flügelprofil. Der zweite Teil der Arbeit ist zweidimensionalen Strömungen gewidmet. Als Flusslöser beschränke ich mich auf den approximativen Riemannlöser von Roe, der das accuracy problem in der eindimensionalen Modellsituation nicht aufweist. Dieser Teil beginnt mit einer Reihe von numerischen Studien, die Hinweise darauf geben sollen, in welcher Richtung die Analyse anzusetzen ist. Für die Zylinderumströmung wird das strukturierte, körperangepasste Gitter derart transformiert, dass das Verhalten des Verfahrens beim stetigen Übergang von quasi quadratischen Zellen über trapezförmige bis hin zu dreieckigen Zellen ersichtlich wird. Vergleichende Rechnungen auf strukturierten und unstrukturierten Gittern um den Zylinder sollen Aufschluss geben über den Einfluss der Gitterstruktur auf das accuracy problem. Im Hinblick auf eine vereinfachte Analyse werden die numerischen Untersuchungen im Anschluss auf strukturierte Gitter mit zwei Zellgeometrien beschränkt: Quadrate und rechtwinklige Dreiecke, die durch Einfügen einer Diagonalen aus den Quadraten hervorgehen. Auf diesen zwei Typen von Finite-Volumen-Zellen wird die stationäre Umströmung eines Rechtecks sowie das dissipative Verhalten auf schräglaufende Kontaktunstetigkeiten untersucht. Der Transport eines Greshowirbels dient als Beispiel einer instationären Strömung. Alle numerischen Ergebnisse legen zwei Dinge nahe: Erstens, dass das accuracy problem verbunden ist mit dem Impulstransport in Scherschichten, und zweitens, dass dieses Problem auf dreiecksförmingen Finite-Volumen-Zellen vermieden wird – unabhängig davon, ob das Gitter strukturiert oder unstrukturiert ist. Bei kartesischen Gittern beobachtet man eine Entkopplung der künstlichen Viskosität in horizontale und vertikale Richtung. Für nicht-triviale Strömungen können daher die Fehlerterme der Ordnung dx/M nicht verschwinden -- der Diskretisierungsfehler wächst mit abnehmender Machzahl. Auf Dreiecks-Gittern gibt es keine solche Entkopplung. Die künstliche Viskosität der Ordnung dx/M enthält die Sprünge der Normalenkomponente der Geschwindigkeit von allen drei Zellkanten. Dies legt die Vermutung nahe, dass auf Dreiecksgittern das accuracy problem vermieden wird, indem diese Sprünge verschwinden – ohne das Geschwindigkeitsfeld zu sehr einzuschränken. Die Studie wird mit einem Beweis dieser Vermutung für den Roelöser im Bereich kleiner Machzahlen im stationären Fall abgeschlossen. KW - Numerische Strömungsmechanik KW - Zweidimensionale Strömung KW - Upwind-Verfahren KW - Schwach kompressible Strömung KW - CFD KW - Numerische Strömungsmechanik KW - Upwind Schemata KW - Numerische Viskosität KW - Weakly compressible flow KW - CFD KW - Upwind schemes KW - Numerical viscosity KW - Low Mach number flow Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus-5747 ER - TY - JOUR T1 - Mitteilungen : Amtsblatt der BTU Cottbus, 2008,21 (04.11.2008) N2 - Neufassung der Prüfungs- und Studienordnung für den Master-Studiengang Power Engineering vom 16. Mai 2008 (Ersetzt durch Amtsblatt 16/2011) T3 - Mitteilungen : Amtsblatt der BTU Cottbus - 2008, H.21 Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus-5773 ER -