TY - THES A1 - Eisentraut, Mark T1 - Beschleunigung des Isothermschmiedens von Titanaluminiden durch gezielte Mikrostrukturentwicklung T1 - Acceleration of isothermal forging of titanium aluminides via controlled microstructure development N2 - Titanaluminide (TiAl) sind vielversprechende Hochtemperaturwerkstoffe, die aufgrund ihrer geringen Dichte und hohen spezifischen Festigkeit insbesondere in der Luft- und Raumfahrtindustrie Anwendung finden. Die Mikrostruktur von TiAl-Legierungen spielt eine entscheidende Rolle für deren mechanische Eigenschaften und Bearbeitbarkeit. Durch gezielte Mikrostrukturentwicklung kann die Umformbarkeit und damit die Effizienz der Bearbeitungsprozesse verbessert werden. Deshalb wurde in der vorliegenden Arbeit eine neue Prozesskette für das Schmieden von Titanaluminiden entwickelt und erprobt, um die Prozesszeiten zu reduzieren und die Wirtschaftlichkeit des Werkstoffs zu erhöhen. Die Prozesskette umfasst drei Schritte: eine Vorwärmebehandlung, eine beschleunigte Umformung und eine eigenschaftsbestimmende Nachwärmebehandlung. Die spezifische Vorwärmebehandlung zur Verbesserung der Umformbarkeit führt zu einer Mikrostruktur mit einem geringen lamellaren Anteil, einem hohen β/β0-Gehalt und einem hohen Anteil an zellularen Reaktionen. Dadurch konnte die maximale Fließspannung im Vergleich zum geHIPten Zustand um ca. 20 % gesenkt werden. Es wurde ein Prozessfenster definiert, in dem der wärmebehandelte Zustand eine geringere Fließspannung und eine verbesserte Schadenstoleranz im Vergleich zum geHIPten Ausgangsmaterial aufweist. Basierend auf den Ergebnissen von Stauchversuchen mit konstanter Dehnrate wurden Dehnratenprofile mit variablen Dehnraten entwickelt, um den Umformprozess zu beschleunigen. Diese Umformung mit variabler Dehnrate wurde sowohl an zylindrischen Proben als auch an Gussrohlingen durchgeführt. Die Ergebnisse zeigten, dass die Prozesszeiten im Vergleich zur Umformung mit konstanter Dehnrate um 50 bis 70 % reduziert werden konnten, ohne eine erhöhte Materialschädigung zu verursachen. Zudem wurde festgestellt, dass die für diese Legierung entwickelten Dehnratenprofile auf andere TiAl-Legierungen übertragbar sind. Abschließend wurde eine eigenschaftsbestimmende Nachwärmebehandlung eingesetzt, die zu einer Mikrostruktur mit verbesserten Eigenschaften führte. Die mechanischen Eigenschaften der mit der neuen Fertigungskette erzeugten Proben sind dabei mit denen der konventionellen Fertigungskette vergleichbar. N2 - TiAl alloys are promising high-temperature materials widely used in the aerospace industry due to their low density and high specific strength. The microstructure of TiAl alloys significantly influences their mechanical properties and machinability. Specific microstructure development can enhance formability, thereby improving the efficiency of machining processes. This study developed and tested a new process chain for forging titanium aluminides to reduce process times and increase economic efficiency. The process chain consists of three steps: preheat treatment, accelerated forming, and property-defining post-heat treatment. The specific preheat treatment aimed at improving formability results in a microstructure with low lamellar content, high β/β0 content, and a high proportion of cellular reactions. Consequently, the maximum flow stress was reduced by approximately 20 % compared to the HIPed condition. A process window was identified where the heat-treated condition exhibited lower flow stress and improved damage tolerance compared to the HIPed base material. Based on the results of hot compression tests with a constant strain rate, strain rate profiles with variable strain rates were developed to accelerate the forming process. This variable strain rate forming was performed on both cylindrical samples and cast blanks. Results showed that process times could be reduced by 50 to 70 % compared to forming with a constant strain rate, without increasing material damage. Additionally, the strain rate profiles developed for this alloy are transferable to other TiAl alloys. Finally, a property-defining post-heat treatment was applied, resulting in a microstructure with enhanced properties. The mechanical properties of the samples produced with the new manufacturing chain are comparable to those of the conventional manufacturing chain. KW - Mechanische Eigenschaften KW - Mechanical properties KW - Titanaluminide KW - Titanium aluminides KW - TNM-B1 KW - Umformung KW - Forming KW - Titanaluminide KW - Mikrostruktur KW - Schmieden KW - Umformen KW - Prozesskette KW - Optimierung Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-70000 ER - TY - THES A1 - Eisold, Hans-Elmar T1 - Zurück zur Lösung : eine kritische Analyse von Innovationsimperativ und Innovationskultur T1 - Back to the solution : a critical analysis of the innovation imperative and innovation culture N2 - Was bedeutet es, innovativ zu sein? Ausgangspunkt der vorliegenden Arbeit ist die weitverbreitete Verwendung des Innovationsbegriffes, für den aber Probleme der Unschärfe oder ein wichtiger historisch-systematischem Bedeutungswandel erkannt werden. Die vorgenommene Auseinandersetzung zur Innovation arbeitet die begriffiche Historie auf und benennt dabei wesentliche Schwerpunkte. Die vorgeschlagene Innovationsdefinition vom Mehrwert zum Zweck des eigenen Erfolgs dient als Ausgangspunkt, um zwischen bloßer Möglichkeit und tatsächlich genutzter Lösung unterscheiden zu können. Die Frage nach der Relevanz ist das Ergebnis dieser individuellen Bewertung. Darüber hinaus wird durch ein, in Anlehnung an bereits existierende Pfad- und Urnenmodelle, entwickeltes Kugelmodell verdeutlicht, dass (Markt)Bedeutung und technisches Potential eben nicht pauschal ineinander überführbar sind. Die Bedeutung von Relevanz zeigt sich auch in der Herausforderung, Forschung als mehr oder weniger sinnvoll bestimmen zu wollen. So ist im akademischen Umfeld der ökonomische Nutzen im Kontext privater Forschung nachvollziehbar. Ein notwendiger gesellschaftlicher Effekt bleibt aber oft aus. Dieser ist oft nur mit akademischen Disziplinen umsetzbar (z. B. Pädagogik, Ökologie), die sich der Ökonomisierung teilweise völlig entziehen. Die Relevanz als Bezugswert akademischer Forschung ist damit nicht allein an ökonomischer Tauglichkeit ausgerichtet, sondern auch an ihrer gesellschaftlichen Gestaltungsabsicht und Notwendigkeit. Dies beinhaltet dann jedoch auch eine kritische Bewertung falscher oder zum Selbstzweck betriebener Forschung ohne Gehalt, deren Ursachen sich u. a. in ihrer zwanghaften Ökonomisierung wiederfinden oder durch Fehler beteiligter Akteursgruppen (menschlicher Makel) hervorgerufen werden. Diese Thesen werden im Kontext einer sinnvollen Handlungsempfehlung diskutiert. Dabei wird ein aus den Elementen Reexion, Fokus und Pragmatismus bestehender Kulturhebel vorgeschlagen, der sowohl aus der Gegenüberstellung geschlossener und offener Innovation als auch klassischer Wissenschaft und Technoscience abgeleitet werden kann. Er beantwortet die eingangs gestellte Frage, was es bedeutet, innovativ zu sein: 1. Was? -> Lösungen schaffen, 2. Wie? -> Ideen/Möglichkeiten in den Relevanzhorizont bringen (relevant machen), 3. Wodurch? -> Reflektion über sich selbst, Fokus auf die Bedürfnisse der Zielgruppe und Pragmatismus bei der Anwendung von Fähigkeiten und Wissen (Kulturhebel). Die Auseinandersetzungen der vorliegenden Arbeit führen zu diesen Schlussfolgerungen hinsichtlich innovativen Handelns N2 - What does it mean to be innovative? The starting point of the present work is the widespread use of the term innovation, for which problems of uncertainty or an important historical-systematic change in meaning are recognized. The discussion on innovation that has been undertaken works through the conceptual history and names key areas of focus. The proposed innovation definition of added value for the purpose of one's own success serves as a starting point to be able to differentiate between mere possibility and actually used solution. The question of relevance is the result of this individual assessment. In addition, a spherical model developed on the basis of existing path and urn models makes it clear that (market) importance and technical potential cannot be translated into one another across the board. The importance of relevance can also be seen in the challenge of determining research as more or less meaningful. In the academic environment, the economic benefits in the context of private research are understandable. However, there is often no necessary social effect. This can often only be implemented with academic disciplines (e.g. pedagogy, ecology), which in some cases completely elude economization. The relevance as a reference value for academic research is therefore not only based on economic suitability, but also on its social design intent and necessity. However, this also includes a critical evaluation of incorrect research or research carried out for its own sake without a salary, the causes of which can be found, among other things, in its compulsive economization or caused by mistakes by groups of actors involved (human flaws). These theses are discussed in the context of a meaningful recommendation for action. A cultural lever consisting of the elements of reflection, focus and pragmatism is proposed, which can be derived from the juxtaposition of closed and open innovation as well as classical science and technoscience. It answers the question asked at the beginning what it means to be innovative: 1. what? -> create solutions, 2. how? -> bring ideas/possibilities into the relevance horizon (make them relevant), 3. by what means? -> reflection on oneself, focus on the needs of the target group and pragmatism in the application of skills and knowledge (cultural levers). The discussions in the present work lead to these conclusions with regard to innovative action. KW - Innovation KW - Innovationskultur KW - Relevanz KW - Kulturhebel KW - Innovation KW - Innovation culture KW - Relevance KW - Culture lever KW - Innovationsforschung Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-52893 ER - TY - THES A1 - Elattassi, Najla T1 - Learning from the past, designing for the future : sustainability of the Mediterranean vernacular T1 - Aus der Vergangenheit lernen, für die Zukunft entwerfen : Nachhaltigkeit des Mediterranen Vernakuläre N2 - With climate change and the depleting ozone layer, awareness about protecting the environment is increasing and “Sustainable Architecture” is becoming an essential part of the architectural future of cities. However, sustainable buildings of today are being built with high cost, high tech systems which can be reduced by taking advantage of past technologies and systems. The brilliance of vernacular architecture and the way man adapted to his surroundings fascinated me and inspired me to do further research on the sustainable characteristics of vernacular settlements of the Mediterranean area in order to determine if these characteristics can be applied to present and future architecture in an innovative way to create sustainable buildings with least possible energy consumption. The method of research was based upon a general analysis of the passive design (solar and wind) characteristics of a town or settlement in Mediterranean climate starting from its site elements such as topography, vegetation, water. After that its urban structure, such as the geometry, block and street orientation and dimensions. Following that, the dwelling characteristics like dwelling shape, orientation and dimensions and finally the thermal regulating elements found in these dwellings, such as windows and vegetation. These elements were given a score according to their contribution to energy savings in buildings. Four case studies were chosen: two vernacular case studies from the region of study (the Mediterranean Coasts) and two modern case studies inspired by the Mediterranean vernacular. The analysis was repeated in the same sequence mentioned: Site, Settlement, Dwelling, Element, for the actual performance of each case study. The elements were given a number of points out of the score assigned for each element in the general analysis. A total score and rating for each case study resulted from this analysis. The objective of these scores were to compare the performance of the vernacular case studies to the vernacular inspired case studies in terms of energy savings. The final scores displayed comparable results between both types of case studies meaning that when these modern settlements were designed with an influence from the Mediterranean vernacular, their performance in energy savings was close to that of a vernacular settlement. That means that it is possible to design settlements which are influenced by vernacular settlements and can even defeat them by following the general guidelines of the vernacular passive design characteristics in addition to modern tools and innovative methods. These guidelines can be reflected in a handbook and rating system which can become a simple step by step guide for architects and planners to design sustainable settlements without the need for expensive and complicated rating systems and consultants. N2 - Selbst mit wachsendem Bewusstsein für die Umwelt und der Entstehung des Begriffs der "nachhaltigen Architektur", gilt Technologie immer noch als die beste und einzige Möglichkeit, ein umweltfreundliches Gebäude zu gestalten. Die Einzigartigkeit der vernakulären Architektur und die Art und Weise, wie sich der Mensch an seine Umgebung anpasste, faszinierten mich und inspirierten mich zu einer ausgiebigen Recherche über die nachhaltigen Charakteristika der vernakulären Siedlungen im Mittelmeerraum, um herauszufinden, ob diese Charakteristika auf die gegenwärtige und zukünftige Architektur auf innovative Weise angewendet werden können, um nachhaltige Gebäude mit möglichst geringem Energieverbrauch zu schaffen. Die Forschungsmethode basiert auf einer allgemeinen Analyse der Merkmale des passiven Designs einer Stadt oder Siedlung im mediterranen Klima mit dem Fokus auf den Einfluss von Sonne und Wind. Untersucht werden dazu Elemente wie Topographie, Vegetation, Wasser. Anschließend folgt die städtische Struktur mit ihrer Geometrie sowie Block- und Straßenorientierung und –abmessungen. Danach werden die Eigenschaften der Gebäude in ihrer Form, Ausrichtung und Abmessungen und schließlich die zu diesen Häusern das energetische Verhalten beeinflussende Elemente wie Fenster und Vegetation untersucht. Auf der Grundlage einschlägiger wissenschaftlicher Literatur werden alle Faktoren entsprechend ihrem Beitrag zur Energieeinsparung in Gebäuden bewertet. Vier Fallstudien dienen zur Überprüfung des Bewertungssystem, zwei Fallstudien aus der Untersuchungsregion (den Mittelmeerküsten) und zwei moderne Fallstudien, die sich an der mediterranen klassischen Weise orientieren. Die Untersuchung jeder Fallstudie wird in der gleichen Systematik wiederholt: Ort, Siedlung, Wohnung, Element und entsprechend der allgemeinen Analyse mit Punkten bewertet. Aus dieser Analyse ergibt sich eine Gesamtpunktzahl und Bewertung für jede Fallstudie. Damit sollen die Leistungen der vernakulären Fallstudien in Bezug auf Energieeinsparungen mit den modernen Fallstudien verglichen werden. Die Endbewertungen zeigen ähnliche Ergebnisse zwischen beiden Arten von Fallstudien. Das heißt, dass moderne unter dem Einfluss der mediterranen Tradition entworfene Siedlungen in Bezug auf Energieeinsparungen nahe an die Leistung einer traditionellen Siedlung heran reichen. Es ist also möglich, Siedlungen zu entwerfen, die mit vernakulären Siedlungen vergleichbar sind und sie sogar übertreffen können, wenn man zusätzlich zu modernen Techniken und innovativen Methoden die allgemeinen Leitlinien des passiven klimagerechten Bauens in vernakulären Siedlungen befolgt. Diese Richtlinien können sich in einem Handbuch und Bewertungssystem widerspiegeln, das für Architekten und Planer zu einem einfachen Schritt-für-Schritt-Leitfaden für den Entwurf nachhaltiger Siedlungen und Bauten werden kann, ohne dass teure und komplizierte Bewertungssysteme und Berater erforderlich sind. KW - Vernacular architecture KW - Sustainable KW - Passive design KW - Mediterranean KW - Vernakuläre Architektur KW - Passives Design KW - Energieeinsparung KW - Bewertungssystem KW - Nachhaltigkeit KW - Mittelmeerraum KW - Stadtentwicklung KW - Architektur KW - Solararchitektur KW - Nachhaltigkeit Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-53091 ER - TY - RPRT A1 - Elmer, Michael A1 - Schaaf, Wolfgang A1 - Biemelt, Detlef A1 - Gerwin, Werner A1 - Hüttl, Reinhard F. T1 - The artificial catchment 'Chicken Creek' - initial ecosystem development 2005-2010 N2 - This volume summarizes the monitoring activities and results at the ‘Chicken Creek’ catchment for the period 2005 to 2010. The development in all ecosystem compartments is assessed, classified, and compared to more mature systems with regard to functional relevance and succession stage. In a final synopsis, the whole catchment is evaluated with regard to ecosystem development and an outlook is given on the expected trends both in the short and the medium term. N2 - In diesem Band werden die Dauerbeobachtungen und ihre Ergebnisse im Einzugsgebiet "Hühnerwasser" im Zeitraum 2005 bis 2010 zusammengefasst. Die Entwicklung aller Ökosystemkompartimente wird abgeschätzt, eingeordnet und mit weiter entwickelten Systemen hinsichtlich funktioneller Relevanz und Sukzessionszustand verglichen. In einer abschließenden Zusammenfassung wird die ökosystemare Entwicklung des Gesamteinzugsgebietes bewertet und ein Ausblick auf die erwarteten kurz- und mittelfristigen Trends gegeben. T3 - Ecosystem development - 3 KW - Welzow KW - Braunkohlentagebau KW - Rekultivierung KW - Wassereinzugsgebiet KW - Ökosystem KW - Ökosystem KW - Künstliches Wassereinzugsgebiet KW - Hühnerwasser KW - Monitoring KW - Ecosystem KW - Artificial catchment KW - Chicken Creek KW - Monitoring Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus-23730 SN - 1867-7800 ER - TY - THES A1 - ELssaedi, Mosbah Mohamed T1 - A new approach to Event-Driven Programming T1 - Ein neuer Ansatz zur ereignisgesteuerten Programmierung N2 - In many applications, like embedded systems or systems with a strong user interaction, the program is mainly controlled by events. An event handler waits for any event to occur, and then processes that event by ignoring it or calling a corresponding action, a procedure declared in the program. In this way, events are coupled with actions and can influence the global state of the whole program. In order to design a well structured program, event handling and corresponding actions should be clearly separated. However, this aim is not always ensured. In this thesis, an approach is introduced, which enforces to design event-driven systems into two main parts: - An event-handling part, also called specification part, and - An action part, also called hand-built program part (hbp). The specification part is defined as a declarative specification of the event-handling in a special language. It is separated from the hand-built program part. Every event can only influence the state of this part, which contains the implementation of control functions, which calls the several actions defined in the hand-built program part and so connects both parts together. The prototype of a framework was implemented which allows to specify the eventhandling part by means of a special editor and generates from it some classes and templates. In order to complete the implementation, the programmer has to fill into the templates program code by hand (therefore called hand-built program part), which describe the actions. N2 - In vielen Anwendungen, wie z.B. eingebetteten Systemen oder Systemen mit starker Nutzerinteraktion, wird das Programm hauptsächlich von Ereignissen gesteuert. Eine Ereignisbehandlungsroutine wartet auf das Auftreten eines beliebigen Ereignisses und verarbeitet dann dieses Ereignis, indem sie es ignoriert oder eine entsprechende Aktion aufruft, eine Prozedur, die im Programm deklariert ist. In dieser Weise sind Ereignisse mit Aktionen gekoppelt und können den globalen Zustand des gesamten Programms beeinflussen. Um ein wohl strukturiertes Programm zu entwerfen, sollten die Ereignisbehandlung und die entsprechenden Aktionen klar getrennt werden. Allerdings wird dieses Ziel nicht immer erreicht. In dieser Arbeit wird ein Ansatz eingeführt, welcher die Beschreibung ereignisgesteuerter Systeme in Form von zwei Teilen erzwingt: - einem Ereignisbehandlungsteil, welcher auch Spezifikationsteil genannt wird. - einem Aktionsteil, welcher auch als handgeschriebener Programmteil bezeichnet wird. Der Spezifikationsteil ist als eine deklarative Spezifikation der Ereignisbehandlung in einer Spezialsprache definiert. Er ist vom handgeschriebenen Programmteil getrennt. Jedes Ereignis kann nur den Zustand dieses Teils beeinflussen, welcher die Implementierung von Steuerfunktionen enthält und die verschiedenen Aktionen aufruft, die im handgeschriebenen Programmteil definiert sind, und dadurch beide Teile miteinander verbindet. Es wurde der Prototyp eines Frameworks implementiert, welches es erlaubt, den Ereignisbehandlungsteil mittels eines speziellen Editors zu spezifizieren und daraus verschiedene Klassen und Templates zu generieren. Um die Implementierung zu vervollständigen, muss der Programmierer Programmcode von Hand in die Templates einfügen (daher die Bezeichnung "handgeschriebener Programmteil"), welcher die Aktionen beschreibt. KW - Ereignisgesteuerte Programmierung KW - Event-Driven Programming KW - Spezifizierung KW - Event-Driven Programming KW - Specification Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus-4574 ER - TY - JOUR A1 - Eltaher, Mahmoud A1 - Breuß, Michael T1 - Deep learning for unsupervised 3D shape representation with superquadrics JF - AI N2 - The representation of 3D shapes from point clouds remains a fundamental challenge in computer vision. A common approach decomposes 3D objects into interpretable geometric primitives, enabling compact, structured, and efficient representations. Building upon prior frameworks, this study introduces an enhanced unsupervised deep learning approach for 3D shape representation using superquadrics. The proposed framework fits a set of superquadric primitives to 3D objects through a fully integrated, differentiable pipeline that enables efficient optimization and parameter learning, directly extracting geometric structure from 3D point clouds without requiring ground-truth segmentation labels. This work introduces three key advancements that substantially improve representation quality, interpretability, and evaluation rigor: (1) A uniform sampling strategy that enhances training stability compared with random sampling used in earlier models; (2) An overlapping loss that penalizes intersections between primitives, reducing redundancy and improving reconstruction coherence; and (3) A novel evaluation framework comprising Primitive Accuracy, Structural Accuracy, and Overlapping Percentage metrics. This new metric design transitions from point-based to structure-aware assessment, enabling fairer and more interpretable comparison across primitive-based models. Comprehensive evaluations on benchmark 3D shape datasets demonstrate that the proposed modifications yield coherent, compact, and semantically consistent shape representations, establishing a robust foundation for interpretable and quantitative evaluation in primitive-based 3D reconstruction. KW - 3D shape representation KW - Superquadrics KW - Deep learning KW - Unsupervised learning KW - Point clouds KW - Geometric modeling Y1 - 2025 U6 - https://doi.org/10.3390/ai6120317 SN - 2673-2688 VL - 6 IS - 12 PB - MDPI CY - Lausanne ER - TY - THES A1 - Enculescu, Mihaela T1 - Wellenausbreitung in neuronalen Feldern mit retardierter Wechselwirkung T1 - Wave propagation in neural fields with delay N2 - Ein wesentlicher Aspekt der Dynamik elektrischer Aktivitaet in neuronalen Gewebe betrifft die Ausbreitung von Aktivitaet in Form von Wellen. In dieser Arbeit untersuchen wir die Existenz und Eigenschaften laufender Wellenloesungen einer nichtlinearen Neuronalen-Feld-Gleichung. Das Modell beruecksichtigt die nichtlokalen synaptischen Verbindungen und die Zeitverzoegerung bei der Kommunikation zwischen den Nervenzellen, die abstandsabhaengig ist. Die Modellgleichung hat daher die mathematische Form einer nichtlinearer, retardierter Integralgleichung. In der Arbeit wird zuerst gezeigt, wie man die Modellgleichung durch ein System von partiellen Differentialgleichungen approximieren kann, das leichter numerisch untersucht werden kann. Anschliessend werden laufende Wellenloesungen des Modells numerisch und analytisch untersucht. N2 - Activity spread in the form of nonlinear waves is a significant issue of neural tissue dynamics. In this thesis we investigate the existence and the properties of traveling wave solutions of a nonlinear neural field equation. The model includes the nonlocal synaptic connections and the space-dependent time delay that occurs at the communication of two neurons. The model equation has therefore the mathematical form of a nonlinear delayed integral equation. In the thesis we first show how the model equation can be approximated by a system of partial differential equations, that can be easyer handled numerically. Afterwards we study traveling wave solutions of the model with numerical and analytical methods. KW - Neuronales Netz KW - Informationsverarbeitung KW - Neural fields KW - Wave propagation KW - Integral equations KW - Delayed equations Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus-438 ER - TY - THES A1 - Engelbrecht, Daniel T1 - Untersuchung der Potentiale und Anforderungen an ein Wirkleistungsmanagement im Verteilnetz mit hohem Anteil von dezentralen Erzeugungsanlagen T1 - Study of the potentials and requirements for an Active Power Management in the distribution system with high propotion of regenerative generation units N2 - In der Dissertation werden neue Potentiale und Anforderungen sowie neue Verfahren und Methoden zur Bereitstellung von Systemdienstleistungen erarbeitet. Der Fokus wird dabei auf das Wirkleistungsmanagement im Verteilnetz gelegt. Bei einer zunehmenden Durchdringung von Erneuerbaren Energien steigt der gegenseitige Einfluss mit den technischen Systemen im Netzbetrieb und bestehenden sowie zukünftigen Märkten. In der Arbeit werden organisatorische und technische Lösungen entwickelt, welche eine sichere Bereitstellung von Regelleistung sowie eine Unterstützung durch den Verteilnetzbetreiber für ein systemdienliches Engpassmanagement des Übertragungsnetzbetreibers ermöglichen. Anhand eines 110-kV-Modellnetzes werden die technischen Lösungen aufgezeigt und bewertet. Dabei zeigt sich, dass eine erweiterte Betriebsplanung im Verteilnetz notwendig wird. Mögliche Konflikte können im Vorfeld durch eine Netzzustandsbewertung und Informationsübermittlung gelöst werden. Weiterhin können Anforderungen des ÜNB zur Unterstützung zum Redispatch im Rahmen einer Vortagesplanung integriert werden. Zur Realisierung der Prozesse und somit Erfüllung der neuen Anforderungen sind zum Teil technische Ände-rungen in den Systemen der Netzführung sowie organisatorische und rechtliche Anpassungen in der Handhabung des Engpassmanagements notwendig. Hierzu werden in der vorliegenden Arbeit konkrete Empfehlungen ausgesprochen. N2 - This thesis presents new potentials and requirements as well as procedures and methods for provision of ancillary services in an electrical system. The focus of the thesis is the Active Power Management in the distribution system. With increasing penetration of renewable energies, the mutual influence of technical systems in the system operation and existing and future markets increases. In this thesis, organizational and technical solutions are developed which enable a secure supply of control power and support from the distribution system operator for a congestion management of the transmission system. Elaborated technical solutions are presented and evaluated using the 110-kV network model. The results of the network simulation show that an extended operational planning is necessary in the operation of the distribution system. Possible can be solved in a forecast process with a network status evaluation and provision of information. Furthermore, requirements of the TSO regarding a support of the Redispatch can be integrated into a forecast process of the system operation of the distribution system. For the realization of the process and to fulfill the new requirements, some technical changes are required in the network operation systems as well as organizational and legal adaptations for the application of the congestions management. In this regard, concrete recommendations are made in this thesis. KW - Wirkleistungsmanagement KW - Verteilnetz KW - Erneuerbare Energien KW - Regelleistung KW - Redispatch KW - Active power management KW - Distribution system KW - Control power KW - Redispatch KW - Renewable energy KW - Lastverteilung KW - Erneuerbare Energien KW - Wirkleistung KW - Verteilungsnetz Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-43479 ER - TY - THES A1 - Engelbrecht, Steffen T1 - Mikrobielle Stickstoffelimination mit kombinierter partieller Nitrifikation/ Anammox (PN/A) in membranbelüfteten hochsalinen und Niedrigtemperatur-Festbettreaktoren T1 - Microbial nitrogen elimination with combined partial nitrification / anammox (PN/A) in membrane aerated highly saline and low temperature fixed bed reactors N2 - Durch anthropogene Aktivität hat sich der Nährstoffeintrag in die Umwelt stark erhöht. Die Hauptquellen sind die Landwirtschaft, kommunales und industrielles Abwasser. Erhöhte Stickstofffrachten haben einen starken Einfluss auf den Stickstoffkreislauf. Das Überangebot an Stickstoff führt zu Eutrophierung in Gewässern und somit zu einem weniger diversen, instabileren Ökosystem. Die Stickstoffeliminierung aus Abwässern ist essentiell für den Schutz der Ökosysteme. Das etablierte System der Nitrifikation/Denitrifikation ist aufgrund des hohen Sauerstoffbedarfs sehr energie- und somit auch kostenintensiv. Der Anammox-Prozess (anaerobe Ammonium Oxidation) ist eine potentielle Alternative zur konventionellen Stickstoffelimination. Anammox-Bakterien nutzen Ammonium und Nitrit als Elektronenakzeptor. Durch Nutzung der partiellen Nitrifikation in Kombination mit Anammox (PN/A) kann bis zu 60 % der Belüftungsenergie eingespart werden. Trotz Erfolgen in der Teilstrombehandlung ist der Prozess noch nicht erfolgreich in der Hauptstrombehandlung eingesetzt worden. Die größten Herausforderungen sind die niedrigen Temperaturen, geringe Zulaufkonzentrationen und hohe Konzentrationen organischen Kohlenstoffs. Die vorliegende Arbeit konnte die Wirksamkeit von membranbelüfteten Biofilm Reaktoren unter Verwendung von synthetischem Abwasser bei niedrigen Temperaturen (18 - 8 °C) belegen. Die Innovation in diesem System ist die räumliche Trennung von nitrifizierenden Bakterien und Anammox Bakterien. Die regelmäßige mechanische Entfernung des Nitrifikanten-Biofilms ermöglichte einen langzeitstabilen Reaktorbetrieb. Diese Reaktorkonfiguration konnte auch erfolgreich für hochsaline Abwässer (5 -30 g NaCl*L-1) bei einer Reaktortemperatur von 30 °C und auch unter Zugabe von TOC (40-100 mg TOC*L-1) genutzt werden. Weiterhin wurden Untersuchungen zur Aktivität von salzadaptierter Anammox-Biomasse und nicht adaptierter Biomasse in einem Bereich von 0 bis 50 g NaCl*L-1 durchgeführt. Bei Konzentrationen unter 30 g NaCl*L-1 konnten keine signifikanten Unterschiede im Abbauverhalten festgestellt werden. Allerdings war adaptierte Biomasse bei höheren Salzkonzentrationen konkurrenzstärker. Außerdem wurden Langzeitlagerungsversuche durchgeführt. Die Lagerungsbedingungen variierten in der Lagerungstemperatur, im Redoxpuffer und der Nährstoffversorgung. Nach 106 Tagen bei 4 °C konnte die Anammox-Biomasse noch 91 % ihrer ursprünglichen Aktivität erhalten. Somit konnte eine einfache und kostengünstige Lagerungsmethode für Anammo-Bakterien entwickelt werden. N2 - Due to anthropogenic activities, the release of nutrients into the environment has dramatically increased. The main sources are agriculture, municipal and industrial waste water. Elevated nutrient loads have strong effects to biochemical cycles. Within limnic ecosystems, an enrichment of nitrogen or phosphorus cause eutrophication, resulting in less diverse and instable ecosystems. An adequate wastewater treatment is one crucial point for relieving the ecosystems and protects them of collapsing. The removal of nitrogen compounds is an essential part in wastewater treatment. Nowadays nitrification/ denitrification is the established treatment process. However, due to high oxygen demand it is a very cost intensive technique. The anammox process (anaerobic ammonium oxidation) is a potential alternative to the conventional nitrogen removal. Anammox bacteria create a short-cut in the nitrogen transformation process. By oxidizing ammonium with nitrite as electron acceptor no further oxygen is needed. The combination of partial nitrification and anammox (PN/A) saves up to 60 % oxygen demand compared to the conventional nitrification/ denitrification process. The PN/A process is often installed as side stream application in wastewater treatment plants. The main stream application was so far mainly hampered by low temperatures, low influent concentrations of nitrogen and high organic carbon concentrations. The current study proofed the suitability of membrane aerated fixed bed biofilm reactors at low temperatures (18 °C - 8 °C) using synthetic wastewater. The distinctive innovation is based on the spatial segregation of the nitrogen metabolizing biofilms of nitrifying bacteria and anammox bacteria. As a result, a stable and reliable degradation rate could be successfully established. Moreover, the developed reactor configuration enabled a facile mechanical removal of nitrifying biofilm for regenerating the reactor capability. In addition, the reactor setup was successfully adapted to high salt concentrations (5 - 20 g NaCl*L-1), using TOC containing synthetic wastewater (40 - 100 mg TOC*L-1), at high temperature (30 °C). Industrial wastewater is often loaded with high salt concentrations. Therefore, the efficiency of salt adapted and non- adapted anammox biomass in presence of different NaCl concentrations (0 - 50 g NaCl*L-1) was also determined. At concentrations below 30 g NaCl*L-1, no significant differences in nitrogen removal rates was measured. However, adapted bacteria were significantly more resistant against higher salt concentrations (>40 g NaCl*L-1). Furthermore, several long-term storage techniques for anammox biomass were examined. Storing conditions differed in terms of temperature, redox buffer and nutrient supplement. As a result, after 106 days at 4 °C the anammox biomass retained 91 % of its specific activity. The established technique provided an economical and simple method suitable for long-term storage of immobilized anammox biomass. KW - PN/A KW - Niedrigtemperatur KW - Anammox KW - Mebranbelüfteter Biofilm-Reaktor KW - Hohe Salinität KW - PN/A KW - Low temperature KW - MABR KW - High salinity KW - Nährstoffeintrag KW - Salzgehalt KW - Abwasser KW - Biofilmreaktor KW - Ammoniumoxidierer Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-48848 ER - TY - THES A1 - Engelhorn, Thorsten T1 - On the value of the wind’s infeed and the costs of capacity build-up : a bottom-up modelling for the German market T1 - Über den Marktwert der Windeinspeisung und die Kosten des Kapazitätsausbaus : eine Bottom-up-Modellierung für den deutschen Markt N2 - In this dissertation, I present three research articles on the economics of wind energy in Germany. The first two chapters primarily assess onshore wind energy’s empirical value in the wholesale market. The third chapter discusses the efficiency of the German wind support scheme. In the first chapter, a database on German onshore wind turbines installed was created by using a general method to fill incomplete stock data. By using the database and highly granular wind speed data, hourly infeed and annual market values of around 25,700 wind turbines in Germany from 2005 to 2015 were calculated, and its drivers – infeed-price-correlation and standard deviation of infeed – analysed. Further, the spread in market values on turbine level was shown, regional differences quantified and the effect of turbine age on market values discussed. Turbines in central Germany had, on average, lower market values than turbines in the north, south or west of Germany. Modern turbines reached higher market values than older turbines. The second chapter on wind turbines’ market values covers the period until 2019. This analysis confirmed that market values were highly diverse on turbine level. Further, it explained why the market value of a single turbine matters in the market premium model. In this context, the magnitude of the outperformance of technologically advanced turbines was assessed. Last, the effect of inter-annual weather variability on wholesale electricity prices and market values was quantified, using 19 different years of winds speeds and infeed data. In the third chapter, it was analysed whether the German wind support scheme incentivised a cost-minimal capacity build-up. Two cost-minimal benchmark scenarios were developed and compared to the historical capacity build-up between 1995 and 2015. The costs of the benchmark scenarios were significantly lower than those of the historical build-up. The benchmark cost reduction largely stemmed from greater efficiency in terms of using better wind sites. It was further shown that a spatially concentrated capacity-build up, as induced in the benchmarks, is beneficial from a consumer’s point of view. N2 - In dieser Dissertation präsentiere ich drei Forschungsartikel mit ökonomischen Fragestellungen zur Windenergie an Land in Deutschland. Die ersten beiden Kapitel behandeln vornehmlich den empirischen Marktwert von Windenergieanlagen im Großhandelsmarkt. Das dritte Kapitel diskutiert die Effizienz des deutschen Windfördersystems. Im ersten Kapitel wurde eine Datenbank mit allen in Deutschland errichteten Windenergieanlagen an Land aufgebaut. Dabei wurde eine allgemeine Methode angewandt, um unvollständige Marktdaten zum Anlagenbestand zu füllen. Mit Hilfe der Datenbank und hochaufgelöster Windgeschwindigkeitsdaten wurden die stündlichen Einspeisungen und jährlichen Marktwerte von rund 25 700 deutschen Windenergieanlagen der Jahre 2005 bis 2015 berechnet, sowie deren Treiber – die Korrelation zwischen Einspeisung und Großhandelspreis und die Standardabweichung der Einspeisung – analysiert. Daneben wurde die Streuung der Marktwerte auf Turbinenebene aufgezeigt, regionale Unterschiede quantifiziert und der Einfluss des Windenergieanlagenalters auf die Marktwerte diskutiert. Anlagen in Mitteldeutschland wiesen im Durchschnitt niedrigere Marktwerte als Anlagen im Norden, Süden oder Westen Deutschlands auf. Moderne Anlagen erzielten höhere Marktwerte als ältere. Das zweite Kapitel zu Windmarktwerten untersucht die Zeit bis ins Jahr 2019. Die Analyse bestätigte die hohe Streuung der Marktwerte auf Anlagenebene. Weiter wurde aufgezeigt, weshalb Marktwerte im Marktprämienmodell für Windenergieanlagen einen Unterschied machen. In diesem Zusammenhang wurde quantifiziert, in welchem Ausmaß technologisch fortschrittliche Anlagen weniger fortschrittlichen überlegen sind. Zuletzt wurde der Einfluss des jährlich schwankenden Wetters auf Strompreise am Großhandelsmarkt und Windmarktwerten quantifiziert; dies geschah durch die Anwendung von 19 unterschiedlichen Jahren stündlicher Windgeschwindigkeits- und Einspeisedaten. Im dritten Kapitel wurde untersucht, ob das deutsche Windfördersystem einen kostenminimalen Kapazitätsaufbau anreizte. Dazu wurden zwei kostenminimale Benchmark-Szenarien entwickelt und zur historischen Entwicklung der Jahre 1995 bis 2015 verglichen. Hierbei zeigte sich, dass die Kosten der Benchmark-Szenarien deutlich geringer waren als in der Historie. Dieser Kostenvorteil stammte größtenteils von einer höheren Effizienz im Sinne einer stärkeren Nutzung ertragreicher Windstandorte. Des Weiteren wurde gezeigt, dass ein räumlich konzentrierter Kapazitätsaufbau, wie in den Benchmark-Szenarien induziert, auch aus Konsumentensicht vorteilhaft ist. KW - Onshore wind power KW - Direct marketing KW - Market value KW - Cost minimisation KW - Efficiency KW - Windenergie an Land KW - Direktvermarktung KW - Marktwert KW - Kostenminimierung KW - Effizienz KW - Windenergie KW - Kostenoptimierung KW - Marktwert Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-61221 ER - TY - THES A1 - Enow, Ernest Ako T1 - Possible synergy between FLEGT-VPA & REDD+ towards improving forest governance framework in Cameroon T1 - Mögliche Synergie zwischen FLEGT-VPA und REDD+ zur Verbesserung des Forstverwaltungsrahmens in Kamerun N2 - Illegal logging is seen as a serious impediment to achieving sustainable management of forests in the tropics. In addition, deforestation contributes in increasing carbon dioxide emissions in the atmosphere, resulting to biodiversity loss and climate change. Illegal logging and deforestation have affected Cameroon’s forest ecosystem negatively since the mid-1980s as a result of the economic crises, which intensified the exploitation of forest resources for multiple purposes. In response, some policy initiatives came up such as FLEGT-VPA and REDD+ to fight against the threats. It is due to the above background that this study was designed to examine the possible synergy between FLEGT-VPA and REDD+ towards improving the forest governance framework in Cameroon. The first part of the study assesses FLEGT-VPA in Cameroon with the application of interviews of key informants who were involved in the negotiation process of the EU-Cameroon Voluntary Partnership Agreement. The second part of the study assesses the management of Bimbia Bonadikombo Community Forest (BBCF), as one of the REDD+ pilot project sites around Mount Cameroon in the South West Region of Cameroon. The use of surveys, content analysis, and observations seeks to assess these two initiatives in their role in improving forest governance in Cameroon. The first part of the research reveals that since Cameroon ratified the FLEGT-VPA in 2011, there has been progressed concerning stakeholder participation in forest-related issues. Again, the study also reveals challenges faced with the setting up of a system to verify timber from legal origin as recommended by the European Union. The research further reveals a lack of commitment by the government in revising the current forest policies and re-organizing the domestic market for timber trade as part of the commitment made by the government during the ratification of the FLEGT-VPA. The second part of the study finds that the management of BBCF is not governed by the provision of the Cameroon community forestry manual or by its bylaws posing doubts if community forestry can halt emissions of greenhouse gases caused by deforestation, thus helping REDD+ achieve its objectives. The study recommends the need for rapid policy reform and a cross-sectoral transformation to enable FLEGT-VPA and REDD+ to synergize for a better policy outcome on issues concerning forestry and climate change. N2 - Die illegale Abholzung wird als ernsthaftes Hindernis beim Erreichen einer nachhaltigen Waldbewirtschaftung in den Tropen angesehen. Darüber hinaus trägt die Entwaldung zur Erhöhung der Kohlendioxidemissionen in der Atmosphäre bei, welches zu Verlusten der Artenvielfalt und zum Klimawandel führt. Seit Mitte der 1980er Jahre haben illegale Abholzung und Entwaldung aufgrund der wirtschaftlichen Krisen das Waldökosystem Kameruns negativ beeinflusst. Die Ausbeutung der Waldressourcen für vielfältige Zwecke wurde verstärkt. Als Reaktion darauf wurden einige politische Initiativen wie FLEGT-VPA und REDD+ ins Leben gerufen, um diesen Bedrohungen entgegenzuwirken. Die vorliegende Studie wurde vor diesem Hintergrund konzipiert, um mögliche Synergien zwischen FLEGT-VPA und REDD+ zur Verbesserung der Forstverwaltung in Kamerun zu untersuchen. Der erste Teil der Studie bewertet FLEGT-VPA in Kamerun durch Interviews mit Schlüsselfiguren, die am Verhandlungsprozess des EU-Kamerun-VPA beteiligt waren. Der zweite Teil der Studie untersucht die Verwaltung des Bimbia Bonadikombo Community Forest (BBCF), einem der REDD+ Pilotprojekte in der Region Südwestkamerun rund um den Mount Cameroon. Durch Umfragen, Inhaltsanalysen und Beobachtungen wird versucht, diese beiden Initiativen in ihrer Rolle bei der Verbesserung der Forstverwaltung in Kamerun zu bewerten. Der erste Teil der Forschung zeigt, dass seit der Ratifizierung des FLEGT-VPA 2011, Kamerun Fortschritte hinsichtlich der Beteiligung der Interessenvertreter an forstbezogenen Fragen gemacht hat. Die Studie zeigt auch Herausforderungen bei der Einrichtung eines Systems zur Überprüfung von Holz aus legaler Herkunft, wie es von der Europäischen Union empfohlen wird. Diese Arbeit zeigt ferner einen Mangel an Engagement seitens der Regierung bei der Überarbeitung der aktuellen Waldpolitiken und der Neuorganisation des Inlandsmarkts für den Holzhandel, wie es die Regierung bei der Ratifizierung des FLEGT-VPA zugesagt hat. Der zweite Teil der Studie ergibt, dass die Verwaltung des BBCF nicht durch die Bestimmungen des Kameruner Leitfadens für Community Forests oder ihre Satzungen geregelt wird, was Zweifel daran aufwirft, ob Community Forests die Emissionen von Treibhausgasen durch Entwaldung stoppen und die Ziele von REDD+ erreichen können. Die Studie empfiehlt rasche Politikreformen und eine sektorübergreifenden Transformation, um FLEGT-VPA und REDD+ in Bezug auf Fragen der Forstwirtschaft und des Klimawandels aufeinander abzustimmen. KW - Cameroon KW - FLEGT-VPA KW - REDD+ KW - Illegal logging KW - Policy KW - Kamerun KW - Illegale Abholzung KW - Entwaldung KW - Politik KW - Kamerun KW - Umweltpolitik KW - Forstverwaltung KW - Rodung KW - Kohlendioxidemission KW - Klimaänderung KW - REDD KW - Forstrecht Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-65364 ER - TY - THES A1 - Epping, Thomas T1 - Color sequencing N2 - In this dissertation, we present several solution approaches for the color change minimization problem that arises in the paint shop of an automobile plant. We give NP-completeness results for an abstract formulation of this problem and show that it is APX-hard, even in a restricted form. For this form, we establish a connection to binary matroids. When solving the color change minimization problem with the help of a line storage system, we present dynamic programs that use algorithms from computational biology, among others. Finally, we look into the color change minimization problem within the overall production process of an automobile plant. We describe an algorithm that sequences a daily production and that has been successfully developed with and implemented in the Ford Motor Company (Europe). N2 - Diese Arbeit stellt verschiedene Methoden zur Lösung des Problems der Farbwechselminimierung in der Lackierstraße einer Automobilfabrik vor. Für eine theoretische Formulierung des Problems geben wir NP-Vollständigkeitsresultate und zeigen, dass es selbst in eingeschränkter Form noch APX-schwer ist. Für diese zeigen wir eine Verbindung zu binären Matroiden auf. Bei der Farbwechselminimierung mit Hilfe eines Linienspeichers geben wir, unter anderem mit Methoden der Bioinformatik, dynamische Programme zur Lösung des Problems an. Schließlich betrachten wir die Farbwechselminimierung im Kontext des kompletten Produktionsprozesses einer Automobilfabrik. Wir beschreiben ein Verfahren zur Sequenzierung einer typischen Tagesproduktion, das in Kooperation mit der Ford-Werke AG erfolgreich umgesetzt wurde. KW - Karosserie KW - Spritzlackieren KW - Farbwechseltechnik KW - Prozessoptimierung KW - Reihenfolgeproblem KW - APX-Hardness KW - Binary methods KW - Dynamic programming KW - Flexible manufacturing systems KW - Projekt management and scheduling Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-000000572 ER - TY - THES A1 - Erlewein, Shina-Nancy T1 - Screening Intangible Heritage : media, heritage and representation: the case of Kutiyattam Sanskrit Theatre, India T1 - Screening Intangible Heritage : Medien, Kulturerbe und Repräsentation: eine Fallstudie zum Kutiyattam Sanskrit Theater in Indien N2 - This research investigates the role of audio-visual media in the representation of intangible cultural heritage and provides a theoretically and empirically grounded concept of the interrelation of media, ICH and representation. It identifies both the potentials and risks involved in media representation, as well as responding to the question regarding how audio-visual representations can foster the safeguarding of ICH, aiming at its sustained transmission and recreation. The study conceptualizes representation as a process in which meaning is produced and negotiated. It refers to discourse in Social/Cultural Anthropology, Heritage Studies and Cultural Studies, particularly making use of the circuit of culture model, Hall’s encoding/decoding model and Assmann’s concept of memory. As ICH is culturally contextualized, the analysis focuses on one specific heritage manifestation: the Kutiyattam Sanskrit theatre. It explores in detail Kutiyattam’s history, identity, performance practice and transformation, including after UNESCO’s proclamation. It analyses the processes and conditions of production, encoding, circulation, reception, utilization and regulation of audio-visual representation and demonstrates the extent to which these dynamic and manifold reciprocal processes influence Kutiyattam practices and practitioners. In the form of a thick description, the study exemplifies that media and modern technologies foster continuity in practice, revitalization, valorization and self-assertion, that they enable education, research, promotion and dissemination of ICH, and contribute to identity construction and the (re)creation of communities. It shows that audio-visual representations - when produced in collaboration with the practicing communities, thereby facilitating culture-specific coding and community use - constitute significant vehicles within safeguarding measures. Differentiating between horizontal and vertical transmission of ICH as well as micro and macro level consumption, the study further identifies numerous challenges involved in the mediatization and digitization of ICH. It addresses issues of access, participation, appropriation and intellectual property and the conflict-ridden processes of homogenization, fragmentation, commercialization and popularization, among others. It argues that rather than being innocent and neutral reflections of cultural practices, audio-visual representations are actively involved in meaning making and knowledge constitution processes and deeply enmeshed in power. It proves that representations shape memory, cultural identity and history and exercise influence on cultural expressions and communities. The study concludes with the provision of general recommendations, giving guidance regarding the utilization of media as well as the production, consumption and regulation of media work, targeting heritage professionals and media professionals alike. N2 - Diese Dissertation untersucht die Rolle audio-visueller Medien in der Repräsentation von Immateriellem Kulturerbe und offeriert ein theoretisch wie auch praktisch fundiertes Konzept der Wechselbeziehungen von Medien, IKE und Repräsentation. Die Arbeit identifiziert Chancen und Risiken medialer Repräsentation und bietet Antworten auf die Frage wie audio-visuelle Medien für den Erhalt von IKE eingesetzt werden und dessen nachhaltige Weitergabe und Entwicklung fördern können. Sie versteht Repräsentation als Prozess, in welchem Bedeutung produziert und verhandelt wird und stützt sich in ihrer Analyse auf Diskurse der Sozial- und Kulturanthropologie, der Heritage Studies und Cultural Studies. Anwendung finden im Besonderen das Modell des Kulturkreislaufes, Hall’s Encoding/Decoding-Modell und Assmanns’s Gedächtniskonzept. Da IKE kulturell kontextualisiert ist, fokussiert die Analyse auf eine spezifische Manifestation von Kulturerbe, das Kutiyattam Sanskrit Theater, welches 2001 von der UNESCO zum „Meisterwerk“ ernannt und 2008 in die „Repräsentative Liste“ eingetragen wurde. Die Arbeit betrachtet detailliert die Geschichte und Identität, performative Praxis und Transformation von Kutiyattam, insbesondere auch nach der Bekanntmachung durch die UNESCO. Sie untersucht die Prozesse und Bedingungen der Produktion, Enkodierung, Zirkulation, Rezeption, Nutzung und Regulation audio-visueller Repräsentationen und legt dar, inwieweit diese dynamischen und vielfältig reziproken Prozesse Kutiyattam Praktiken wie auch Praktizierende beeinflussen. In einer dichten Beschreibung zeigt die Studie, dass Medien und moderne Technologien Kontinuität von Praktiken, Revitalisierung, Inwertsetzung und Selbstbehauptung, wie auch Bildung, Forschung, Promotion und Verbreitung von IKE befördern und einen wesentlichen Beitrag zur Identität- und Gemeinschaftsbildung leisten. Sie weist auf, dass audio-visuelle Repräsentationen, wenn sie in Kollaboration mit den Gemeinschaften produziert werden und somit eine kultur-spezifische Kodierung und den Gebrauch innerhalb der Gemeinschaft ermöglichen, als bedeutende Träger innerhalb von Erhaltungsmaßnahmen anzusehen sind. Zwischen horizontaler und vertikaler Weitergabe sowie zwischen Konsumption auf Mikro- und Makroebene unterscheidend, markiert die Studie zudem zahlreiche Herausforderungen, welche in der Mediatisierung und Digitalisierung von IKE zu Tage treten. Sie adressiert Fragen des Zugangs, der Beteiligung und Aneignung sowie des geistigen Eigentums und benennt, unter anderem, konfliktbehaftete Prozesse der Homogenisierung, Fragmentierung, Kommerzialisierung und Popularisierung. Sie argumentiert, dass audio-visuelle Repräsentationen von IKE keine neutralen und objektiven Abbilder kultureller Praktiken darstellen, sondern vielmehr aktiv eingebunden sind in Machtverhältnisse, sowie in Prozesse der Bedeutungskonstruktion und Wissensgenerierung. Sie belegt, dass Repräsentationen zur Formation von Gedächtnis, kultureller Identität und Geschichte beitragen und somit auf kulturelle Ausdrucksformen wie auch Trägergruppen einwirken. Die Arbeit endet mit der Bereitstellung allgemeiner Empfehlungen, welche bezüglich der Mediennutzung sowie der Produktion, Konsumption und Regulation von Medienarbeiten Handlungshilfen geben. Diese Empfehlungen richten sich sowohl an Fachpersonal aus der Medienbranche wie auch dem Kulturerbebereich. KW - Intangible Cultural Heritage KW - UNESCO KW - Mediatization and digitization KW - Audio-visual representation KW - Kutiyattam Sanskrit theatre KW - Immaterielles Kulturerbe KW - Mediatisierung und Digitalisierung KW - Audio-visuelle Repräsentation KW - Kutiyattam Sanskrit Theater KW - Kudiyattam KW - Immaterielles Kulturerbe Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-35985 ER - TY - JOUR A1 - Ertugrul, Gökhan A1 - Emdadi, Aliakbar A1 - Härtel, Sebastian T1 - Powder production and additive manufacturing of iron aluminide alloys using plasma ultrasonic atomization and laser-directed energy deposition JF - Additive Manufacturing Letters N2 - With a combination of desirable properties such as low density, high specific yield strength, low material cost, and excellent oxidation and corrosion resistance, iron aluminide (Fe-Al) has shown considerable potential to be an alternative to high-alloy chromium steels, and in some cases even nickel-based superalloys, in hightemperature applications. Due to these features, it is especially suitable for the aerospace and automotive industries. Recent advancements indicate an increasing interest in Fe-Al within the additive manufacturing industry, particularly in directed energy deposition (DED) processes. Despite this progress, processing of Fe-Al materials using the laser directed energy deposition (L-DED) has not been sufficiently investigated. In this study, Fe-Al powder material was produced from a commercial Al rod encased in a commercial low alloy-steel tube by a plasma-based ultrasonic atomization eliminating the need to cast an alloy ingot in advance. Subsequently, the produced powder was used in a L-DED process to fabricate an additively manufactured sample. The sample was investigated in terms of mechanical property, microstructure, chemical composition, and phase structure by scanning electron microscope (SEM) / energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), electron backscatter diffraction (EBSD) and microhardness analyses. KW - Iron aluminides (Fe-Al) KW - Laser directed energy deposition (L-DED) KW - Plasma ultrasonic atomization KW - Powder KW - Intermetallic phase Y1 - 2025 U6 - https://doi.org/10.1016/j.addlet.2025.100313 SN - 2772-3690 VL - 14 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Ertugrul, Gökhan A1 - Emdadi, Aliakbar A1 - Jedynak, Angelika A1 - Weiß, Sabine A1 - Härtel, Sebastian T1 - Hot forming behavior of tungsten carbide reinforced Ni-based superalloy 625 additively manufactured by laser directed energy deposition JF - Additive Manufacturing Letters N2 - The demands of high-performance industries such as aerospace, automotive, tool manufacturing, oil, and gas industries are driving the innovation in high-performance materials and their production methods. This study explores the impact of hybrid manufacturing, specifically the effect of the addition of tungsten carbide (WC/W2C) via Laser-Directed Energy Deposition (L-DED), on the hot workability, hardness, and microstructure of nickel-based superalloy Inconel 625 (IN625). IN625 is known for its high temperature and high corrosion resistance, and tungsten carbide for its high wear resistance and grain refinement effect. The integration of WC/W2C particles into the IN625 matrix, in addition to the use of the hybrid approach of additive manufacturing followed by a hot–forming process, significantly influences the microstructure and mechanical behavior of the material. Thus, while incorporation of the WC/W2C can strengthen the material and extend the mechanical limitations, its full impact, including any potential usages, should be thoroughly evaluated for the intended application of the materials. To understand the effect of WC/W2C, additive manufacturing of IN625 both with and without WC/W2C and isothermal hot compression was carried out. The objective is to analyze the differences in microstructure and properties between L-DED manufactured IN625, and WC-reinforced IN625, and their hot-forming behavior, focusing on the effects of WC addition and post-deformation on microstructure and mechanical properties. This work represents the first investigation into the effect of WC/W2C hard particles on the hot-forming process of additively manufactured Ni-based metal matrix composites. KW - Hybrid manufacturing KW - Laser-directed energy deposition (L-DED) KW - Hot-forming KW - Inconel 625 (In625) KW - Microstructure manipulation Y1 - 2025 U6 - https://doi.org/10.1016/j.addlet.2025.100267 SN - 2772-3690 VL - 13 PB - Elsevier CY - Amsterdam ER - TY - THES A1 - Everth, Stefanie A1 - Kaßner, Astrid T1 - „Die Pflege entwickelt sich weiter“ : eine Forschungsarbeit zur Lehre in der Praxis T1 - “Nursing continues to be developed” : a research work on teaching in practice N2 - Die Masterarbeit untersucht das pflegewissenschaftliche und pflegedidaktische Anleitungshandeln sowie die habitualisierten Praktiken von Lehrenden in der Praxis in der pflegeberuflichen Ausbildung. Verglichen werden akademische und berufsbildende Lehrende in der Praxis aus den pflegerischen Settings: akutstationär, stationäre Langzeitpflege und ambulante Pflege. Ziel ist es, empirische Erkenntnisse über die Gestaltung der Praxislehre und über das Selbstverständnis zu gewinnen sowie Entwicklungsmöglichkeiten aufzuzeigen. Mittels qualitativer Sozialforschung wurden 14 leitfadengestützte Expertinnen- und Experteninterviews mit Lehrenden in der Pflegepraxis nach der Grounded-Theory-Methodologie durchgeführt und ausgewertet. Die Datenanalyse erfolgte durch offenes, axiales und selektives Kodieren inklusive der Anwendung des mentalen Felds als Forschungstool. Die Ergebnisse zeigen, dass die habitualisierten Praktiken im Anleitungshandeln von Lehrenden in der Praxis kontrastierende pflegewissenschaftliche und pflegepädagogische Begründungsmuster aufweisen. Ihr Berufsverständnis, ihre Kompetenzbildung und Wissensbedarfe beeinflussen maßgeblich die Gestaltung der Praxislehre. Anhand von Fallrekonstruktionen werden unterschiedliche Anleitungsprofile herausgearbeitet. Die Forschungsarbeit begründet empirisch die Notwendigkeit einer stärkeren Professionalisierung der Lehrenden in der Pflegepraxis. Empfehlungen zur hochschulischen Qualifizierung unter Einbindung der berufsbildenden Lehrenden werden abgeleitet. N2 - The master's thesis examines the nursing-scientific and nursing-didactic instructional behaviour as well as the habitualised practices of teachers in practice in nursing training. It compares academic and vocational teachers in practice from the following nursing settings: acute-care, long-term-care and home-care. The aim is to gain empirical insights into the organisation of practical teaching and self-image, as well as to identify development opportunities. Using qualitative social research, 14 guideline-based expert interviews with teachers in nursing practice were conducted and analysed according to grounded theory methodology. The data was analysed using open, axial and selective coding, including the use of the mental field as a research tool. The results show that the habitualised practices in the instructional actions of teachers in nursing practice exhibit contrasting patterns of justification in terms of nursing science and nursing education. Their understanding of the profession, their competence formation and knowledge requirements have a decisive influence on the design of practical teaching. Different instruction profiles are worked out on the basis of case reconstructions. The research work empirically substantiates the need for greater professionalisation of teachers in nursing practice. Recommendations for higher education qualification with the involvement of vocational training teachers are derived. KW - Lehre in der Pflegepraxis KW - Habitualisierte Praktiken KW - Pflegeberufliche Ausbildung KW - Lehrendenprofessionalisierung KW - Anleitungshandeln KW - Teaching in nursing practice KW - Habitualised practices KW - Nursing education KW - Professionalisation of teachers KW - Instructional action KW - Pflegeberuf KW - Pflegepädagogik KW - Pflegewissenschaft KW - Professionalisierung Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-71762 ER - TY - THES A1 - Ewusi, Anthony T1 - Groundwater exploration and management using Geophysics : Northern Region of Ghana T1 - Grundwassererforschung und -management mittels Geophysik in der Nordregion von Ghana N2 - Groundwater has been identified as the best source for rural water supply in most rural communities in the Northern region of Ghana because it eliminates the problems of water borne diseases which have affected communities in the region over the years. The guinea worm disease is presently not totally eradicated in the area and there are signals that its occurrence will be increasing in the near future if adequate measures are not implemented to curtail the problem. Adequate groundwater exploration and management appears to be the key to ensure that potable and safe water is available for the entire population of the region and that its availability on a sustainable basis is guaranteed. Groundwater facilities being provided in the area include; engineered hand dug wells, boreholes fitted with hand pumps and mechanised small towns’ piped schemes. Groundwater exploration programs implemented have however resulted in low success rates of borehole drilling because of the lack of a systematic and methodological approach. The available conventional geophysical techniques; one dimensional (1-D) electrical resistivity profiling and sounding as well as the electromagnetic (EM) methods have not been able to efficiently select suitable sites for successful borehole drilling because of their inability to successfully demarcate areas which are likely aquifer potential zones for successful groundwater abstraction. Current borehole drilling success rates especially in the Voltain rock formation are very low. The complex geological setting of groundwater systems in the area gives cause for the adoption and application of a systematic methodological approach in groundwater exploration utilising effective geophysical techniques. Available geophysical techniques which have been considered in this research work include; two dimensional (2-D) multi-electrode electrical resistivity survey, electro kinetic survey (EKS) and the radon survey. N2 - Grundwasser hat sich als die beste Quelle für die Trinkwasserversorgung in den ländlichen Regionen im nördlichen Teil Ghanas herausgestellt, weil dadurch die durch das Trinkwasser übertragenen Krankheiten ausgeschlossen werden, die seit Jahren die Gemeinden der Region befallen. Die durch den Guineawurm verursachte Krankheit ist in der Region heutzutage noch nicht ganz ausgerottet, und es gibt Hinweise, dass ihr Auftreten in der nahen Zukunft zunehmen würde, falls keine betreffenden Maßnahmen unternommen werden. Angemessene Grundwassererkundung und Grundwasser-Management sind ein wesentlicher Faktor, um sicherzustellen, dass sicheres und trinkbares Wasser für die ganze Bevölkerung der Region zur Verfügung steht und dass die Wasserverfügbarkeit auf einer nachhaltigen Basis garantiert wird. Die im Gebiet vorhandene Einrichtungen zur Grundwasserförderung umfassen handgeschachtete Brunnen, mit Handpumpen ausgestattete Bohrungen und Rohrleitungsinstallationen für größere Dörfer. Bisherige Grundwassererkundungsprogramme hatten eine niedrige Erfolgsquote (d.h. Anteil grundwasserliefernder Brunnen), weil es an den systematischen und methodologischen Ansätzen mangelte. Die verfügbaren herkömmliche geophysikalische Methoden – eindimensionale (1-D) elektrische Widerstandsprofile und -sondierungen und elektromagnetische (EM) Methoden – waren für die Ausweisung grundwasserhöfiger Bohrlokationen wenig geeignet. Die gegenwärtige Erfolgsquote von Brunnenbohrungen, besonders in der Voltain-Formation, ist sehr niedrig. Die komplexen geologischen Verhältnisse, die Grundwassersysteme im Untersuchungsgebiet prägen, gaben Anlass zur Entwicklung einer systematischen methodologischen Grundwassererkundung mit Einsatz effektiver geophysikalischer Methoden. Die verfügbaren geophysikalischen Verfahren, die in dieser Arbeit betrachtet wurden, sind die zweidimensionale (2-D) elektrische Widerstandskartierung, das elektrokinetische Verfahren (electro kinetic survey, EKS) und die Radon-Kartierung. KW - Ghana KW - Grundwasser KW - Hydrologie KW - Geophysik KW - Grundwasser KW - Geophysikalische Methode KW - 2-D elektrische Widerstandskartierung KW - Elektrokinetisches Verfahren KW - Radon-Kartierung KW - Groundwater KW - Geophysical techniques KW - 2-D multi-electrode electrical resistivity survey KW - Electro kinetic survey KW - Radon survey Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus-378 ER - TY - THES A1 - Extra, Simon Karl T1 - Ein Beitrag zur ganzheitlichen Optimierung in der Kerntriebwerksvorauslegung T1 - A contribution to holistic optimization in core engine design N2 - Die etablierte Methode der Kerntriebwerksvorauslegung, die den Pfad immer größerer Komplexität und Abbildungsgenauigkeit bei abnehmender Abstimmung und Interaktion zwischen den Komponenten des Kerntriebwerks beschreitet, kann eine Systemverbesserung nicht zuverlässig herbeiführen. Dabei beginnt die Betrachtung des zu entwerfenden Triebwerks mit einer Gesamtbetrachtung und wird anschließend an weitgehend getrennte Expertengruppen übergeben. In diesen wird dann mit Auslegungswerkzeugen steigenden Detailgrads von analytischen Rechnungen mit empirischer Unterstützung über Stromlinienkrümmungsverfahren hin zu 3D-CFD-Methoden der Entwurf durchgeführt. Das Ziel dieser Arbeit ist es, den Entwurfsprozess für das Kerntriebwerk weg von einer Optimierung einzelner Komponenten mit detaillierten Methoden hin zu einer ganzheitlichen Betrachtung der Qualität des Entwurfs zu führen. Dies überwindet die oben beschriebenen Einschränkungen in der Auslegung und ist trotzdem in der Lage, auf bestehende validierte Analysewerkzeuge zurückzugreifen. Dazu werden die dafür genutzten Kopplungsstrategien einer vergleichenden Untersuchung mithilfe eines analytischen Kerntriebwerksmodells unterzogen. Dabei wird die Wichtigkeit einer leistungsfähigen Kopplungsstrategie in Verbindung mit einem passenden Optimierungsalgorithmus dargestellt. Dies führt nicht nur zu einer Verbesserung der Ergebnisqualität, sondern ermöglicht oftmals erst den Einsatz kooperativer Methoden. Ein Verfahren mit stochastischem Sampling und der Nutzung von Antwortflächen wird in diesem Kontext erläutert und weiterentwickelt. Den Schnittstellen zwischen den Komponenten und ihrer Definition, Abbildung und Beeinflussung durch das Optimierungsverfahren kommt dabei entscheidende Bedeutung zu. Auf Basis dieses Vergleichs werden auf industriellen Methoden basierende Komponentenprozesse für die Analyse und Optimierung von Verdichter, Brennkammer und Turbine auf ihre Eignung im Rahmen einer ganzheitlichen Optimierung hin zunächst untersucht und dann angepasst. Die evaluierten Kopplungsstrategien und die angepassten Komponentenoptimierungsprozesse werden in einen Systemoptimierungsprozess überführt. Dazu wird die gewählte Kopplungsstrategie hierfür angepasst und demonstriert nach der Optimierung eine Verbesserung hinsichtlich der Systemzielfunktion, wodurch die Anwendbarkeit von kooperativen Auslegungsmethoden im industriellen Kontext gezeigt wird. N2 - The state-of-the-art method for the preliminary design of aero engines uses the path of increasing complexity and details while decreasing interaction and interdependence of the components of the core engine. This method is not able to provide a meaningful improvement of the overall system performance. Whilst the initial steps of the engine design are deeply integrated, the current method steps away from that and gives design decisions to separate groups of experts, where methods with ever-increasing level of detail are applied to design. This covers analytical tools with correction factors taken from empirical methods Meanline analysis methods as well as 3D-CFD methods. The objective of the present work is to move the design process for the core engine away from an optimization of isolated components towards a holistic approach assessing the overall system quality. This allows the designer to overcome the limitations described above whilst retaining the knowledge inherent to established design methods. The used coupling strategies are, therefore, applied to an analytical representation of a core engine model and compared. This shows the importance of finding the right coupling strategy in conjunction with an appropriate optimization strategy. It not only improves the results but may be the key to using a specific coupling method in the first place. A method using stochastic sampling in combination with response surfaces is described in detail and expanded. The interfaces between components are a major focus and are important with respect to their definition, representation and modification. Based on this, industrial methods for the analysis and optimization of compressor, combustor and turbine are checked for their performance and modified accordingly. A system optimization process is created using the coupling methods and system processes discussed earlier. The chosen coupling strategy is modified and shows its potential to improve the system goal function during the optimization process. This shows the validity of using cooperative design methods in the context of industrial aero engine design. KW - Luftfahrtantriebe KW - Kerntriebwerk KW - Antwortflächen KW - Vorauslegung KW - Kopplungsstrategien KW - Aero engines KW - Core engine KW - Response surfaces KW - Pre-design KW - Coupling methods KW - Flugtriebwerk KW - Entwurf KW - Optimierung KW - Komplexes System KW - Bemessung Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-71459 ER - TY - THES A1 - Eyb, Simona von T1 - The future is a shared country : an application of the collaborative economic model in heritage tourism T1 - Die Zukunft ist ein gemeinsames Land : die mögliche Anwendung eines kollaborativen Wirtschaftsmodells für den Welterbe-Tourismus N2 - This thesis contributes to the understanding of the collaborative economic model and its applicability in the development of heritage tourism in rural areas. It does so by examining the conceptual and operational attractiveness of the collaborative economy and by proposing a new collaborative model for tourism development. The first part of the research provides a broad theoretical contextualisation of the collaborative economic model. The main assumption is that the duality between individual and collective values lies at the core of all social interactions, and is essential in understanding the conceptual appeal of the collaborative model. The study draws upon concepts and paradigms from a wide range of academic disciplines to frame this assumption: moral philosophy, religion, history, national and political narratives, neuroscience, evolutionary biology, psychology, anthropology and World Heritage discourses. It continues with an analysis of this duality within various theoretical models in the history of Western political economy, and argues that the search for an ideal model of economic policy represented a constant balancing act between individualist or collective goals. The thesis further investigates this duality at the microeconomic level, in relation to specific aspects of economic behaviour: motivation, interaction, ownership, and modes of consumption. The research continues to examine the key characteristics of the collaborative economy, as an emerging model that challenges the structures of the dominant market economy. It demonstrates how the collaborative economy provides an ingenious manner to reconcile individual interests with a sense of community and cooperative action, developing a narrative that rehabilitates the social nature of economic activities. The second part of the thesis investigates the operational attractiveness of a potential collaborative tourism model. It explores the perspectives of both the providers (hosts) and the consumers (tourists) of travel experiences. With the help of data collected from a survey conducted at four selected locations in Romania (Hrabusna, Breaza de Sus) and India (Bhavikeri, Gokarn), the study identifies a high level of acceptance from potential hosts towards a small-scale collaborative tourism model. Similarly, data collected from an online survey offers valuable insights into the tourists’ acceptance of a collaborative tourism model and the functional aspects of its implementation. Finally, the thesis proposes a new collaborative model for small-scale heritage tourism in rural areas – sharitage. The findings of this research provide a good basis for the elaboration of new socio-economic practices that would generate development opportunities and transparent benefits for vulnerable communities in rural areas, respond to the growing tourist demand for immersive, locally contextualised travel experiences, and contribute to the safeguarding of traditional knowledge and practices. N2 - Diese Dissertation leistet einen Beitrag zum Verständnis des kollaborativen Wirtschaftsmodells und seiner Anwendung für die Entwicklung des Kulturerbe-Tourismus im ländlichen Raum. Der erste Teil der Forschungsarbeit stellt eine breite theoretische Kontextualisierung des kollaborativen Wirtschaftsmodells dar. Die Leithypothese lautet, dass die Dualität zwischen individuellen und kollektiven Werten die Grundlage aller sozialen Interaktionen und ein wesentlicher Aspekt der konzeptionellen Anziehungskraft des kollaborativen Modells ist. Die Studie berücksichtigt Konzepte und Paradigmen zahlreicher akademischer Disziplinen, um diese Hypothese zu unterstützen: Moralphilosophie, Religion, Geschichte, nationale und politische Narrativen, Neurowissenschaft, Evolutionsbiologie, Psychologie, Anthropologie und Welterbe-Diskurse. Weiterhin erfolgt eine Analyse dieser Dualität im Rahmen verschiedener theoretischer Modelle in der Geschichte der westlichen politischen Ökonomie. Das Hauptargument ist, dass die Suche nach dem optimalen Modell für Wirtschaftspolitik einen permanenten Balanceakt zwischen individualistischen und kollektiven Zielen darstellte. Die Arbeit erforscht, inwiefern diese Dualität auch auf mikroökonomischer Ebene identifizierbar ist, mit Bezug auf verschiedene für das wirtschaftliche Verhalten relevante Aspekte. Die Forschungsarbeit untersucht weiterhin die zentralen Elemente der kollaborativen Wirtschaft, die die Strukturen der dominanten Marktwirtschaft herausfordert. Die Studie zeigt, wie die kollaborative Wirtschaft kreative Rahmenbedingungen schafft, um individuelle Interessen mit Kooperation und einem Gemeinschaftsgefühl zu vereinbaren und wie sie ein besonderes Narrativ entwickelt, das die soziale Natur von wirtschaftlichen Aktivitäten hervorbringt. Der zweite Teil der Dissertation untersucht die operative Attraktivität eines potenziellen kollaborativen Tourismus-Modells. Dies bezieht sich sowohl auf die Perspektiven der Anbieter (Gastgeber) als auch auf die der Konsumenten (Touristen) der Reiseerlebnisse. Basierend auf Daten, die an je zwei ausgewählten Orten in Rumänien (Hrabusna, Breaza de Sus) und Indien (Bhavikeri, Gokarn) sowie in einer Online-Umfrage erhobenen wurden, weist die Studie eine hohe Akzeptanz der potenziellen Gastgeber und Touristen für ein kollaboratives Tourismus-Modell nach. Schließlich beschreibt die Forschungsarbeit ein neues kollaboratives Model für die Entwicklung von Kulturtourismus auf lokaler Ebene im ländlichen Raum – Sharitage. Die Erkenntnisse dieser Forschungsarbeit bieten eine gute Basis für die Ausarbeitung neuer sozioökonomischer Praktiken, die Entwicklungsmöglichkeiten und transparente Vorteile für schutzbedürftige Gemeinschaften in ländlichen Gebieten generieren, der wachsenden Nachfrage auf Seiten der Touristen für immersive, lokal kontextualisierte Reiseerlebnisse entgegenkommen und zum Schutz traditionellen Wissens und traditioneller Praktiken beitragen könnte. KW - World heritage KW - Heritage tourism KW - Collaborative economy KW - History of economic models KW - Individual and collective values KW - Welterbe KW - Kulturtourismus KW - Kollaborative Wirtschaft KW - Wirtschaftsgeschichte KW - Individuelle und kollektive Werte KW - Ländlicher Raum KW - Wert KW - Sharing Economy KW - Wirtschaft KW - Geschichte KW - Welterbe KW - Bildungstourismus Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-61300 ER - TY - THES A1 - Ezeamama, Anayo T1 - Evaluating policy impacts of minimum energy performance standards (MEPS) on Nigeria’s Nationally Determined Contribution (NDC) to the Paris Agreement T1 - Evaluierung der politischen Auswirkungen von Mindestnormen für die Energieeffizienz (MEPS) auf Nigerias national festgelegten Beitrag (NDC) zum Pariser Abkommen N2 - The Nigerian government has commenced the development of minimum energy performance standards (MEPS) as part of measures to achieve the energy and emissions savings target established in Nigeria’s Nationally Determined Contribution (NDC) to the Paris Agreement. It is expected that the implementation of MEPS will also help to address the challenges of unreliability of electricity supply and facilitate the desired energy-efficient appliance market transformation. The MEPS currently covers the three most energy-consuming electrical products in households (lighting, refrigerators, and air conditioners). This research relied on data collected from the survey of 384 households in the case study area of Enugu to study the policy impacts of the current MEPS and identify the potential for its improvement. The research also, empirically, investigated policy and institutional barriers against appliance energy efficiency improvement in the country. Three different policy scenarios were conceptualized to model the policy impacts of current MEPS: a scenario assuming no MEPS or a business-as-usual (BAU) scenario, a policy scenario (PS) that considers the current MEPS, and an aggressive policy scenario (APS) that assumes the scaling up of the current MEPS to more stringent levels. The policy analysis modeling system (PAMS) was adopted to study the impacts of MEPS considering a policy implementation period of 2019 through 2030. The United Nations’ integrated policy framework was also adopted as evaluation criteria to identify policy gaps in the existing policy measures and the identification of possible policy overlaps was conducted using content analysis. Based on the results, the implementation of the current standards would reduce annual residential electricity demand in the surveyed households by 37% compared to BAU. National-level policy impacts show that the implementation of more stringent MEPS would contribute about 11.3% of the national emissions reduction target reached in Nigeria’s NDC. The research also finds out that key policy instruments (such as financial incentives) are still in their planning stages. Furthermore, the result from the content analysis reveals that the assigned institutional roles for the advancement of end-use energy efficiency are in some cases, not based on the statutory mandates of the respective institutions which create room for possible overlaps. To close the existing energy efficiency gaps and achieve effective energy-efficient appliance market transformation, the research underscores the need for a large-scale appliance market assessment to understand current baseline efficiency levels which will guide future policy designs and ensure that MEPS remain effective. The research also recommends key possible frameworks that can guide the design and implementation of financial incentive instruments to make energy-efficient investments more attractive. N2 - Die nigerianische Regierung hat mit der Entwicklung von Mindeststandards für Energieeffizienz (MEPS) als Teil der Maßnahmen zur Erreichung des Energie- und Emissionseinsparungsziels begonnen, das in Nigerias national festgelegtem Beitrag (NDC) zum Pariser Abkommen festgelegt wurde. Es wird erwartet, dass die Umsetzung der MEPS dazu beitragen wird, die Herausforderungen der unzuverlässigen Stromversorgung zu bewältigen und die gewünschte Umstellung des Marktes für energieeffiziente Geräte zu erleichtern. MEPS deckt derzeit die drei am meisten Energie verbrauchenden elektrischen Haushaltsgeräte ab (Beleuchtung, Kühlschränke und Klimaanlagen). Diese Studie stützt sich auf Daten aus, der Befragung von 384 Haushalten im Fallstudiengebiet von Enugu, um die Auswirkungen der aktuellen MEPS zu untersuchen und Verbesserungspotentiale zu identifizieren. Die Studie untersuchte auch empirisch politische und institutionelle Barrieren, die einer Verbesserung der Energieeffizienz von Haushaltsgeräten entgegenstehen. Drei verschiedene Politikszenarien wurden entworfen, um die Auswirkungen der aktuellen MEPS zu modellieren: ein Szenario, das keine MEPS oder ein Business-as-usual (BAU)-Szenario annimmt, ein Politikszenario (PS), das die aktuelle MEPS berücksichtigt, und ein aggressives Politikszenario (APS), das die Erhöhung der aktuellen MEPS auf ein strengeres Niveau annimmt. Das Policy Analysis Modeling System (PAMS) untersuchte die Auswirkungen der MEPS im Zeitraum von 2019 bis 2030. Das integrierte politische Rahmenwerk der Vereinten Nationen wurde ebenfalls als Bewertungskriterium herangezogen, um politische Lücken in den bestehenden politischen Maßnahmen zu identifizieren. Die Identifizierung möglicher politischer Überschneidungen wurde mithilfe einer Inhaltsanalyse durchgeführt. Basierend auf den Ergebnissen reduziert die Umsetzung der aktuellen Standards die jährliche Stromnachfrage in den untersuchten Haushalten um 37% im Vergleich zum BAU reduzieren. Die Auswirkungen auf nationaler Ebene zeigen, dass die Umsetzung strengerer MEPS etwa 11,3% des nationalen Emissionsreduktionsziels im nigerianischen NDC beitragen würde. Wichtige politische Instrumente (wie finanzielle Anreize) sind noch in der Planungsphase. Darüber hinaus zeigt die Inhaltsanalyse, dass die institutionellen Rollen für die Förderung der Endenergieeffizienz in einigen Fällen nicht auf den gesetzlichen Mandaten der jeweiligen Institutionen basieren, was Raum für mögliche Überschneidungen schafft. Um Energieeffizienzlücken zu schließen und eine effektive Transformation des Marktes für energieeffiziente Geräte zu erreichen, unterstreicht die Studie die Notwendigkeit einer groß angelegten Bewertung des Gerätemarktes, in der die aktuellen Basiseffizienzniveaus als Richtschnur für zukünftige politische Maßnahmen dienen. Die Studie empfiehlt Rahmenbedingungen, die das Design und die Implementierung von finanziellen Anreizinstrumenten leiten, um energieeffiziente Investitionen attraktiver zu machen. KW - Mindeststandards für die Gesamtenergieeffizienz KW - Auswirkungen der Politik KW - Nationally Determined Contribution KW - Pariser Abkommen KW - Haushaltsgeräte KW - Minimum Energy Performance Standards KW - Policy impacts KW - Nationally Determined Contribution KW - Paris Agreement KW - Appliances KW - Nigeria KW - Klimaabkommen von Paris KW - Energieeffizienz KW - Emissionsverringerung KW - Elektrisches Haushaltsgerät KW - Elektrizitätsversorgung Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-54598 ER -