TY - THES A1 - Ganie, Umar Bashir T1 - Thermal analysis of lithium niobate tantalate bulk mixed crystals T1 - Thermische Analyse von Lithium-Niobat-Tantalat-Mischkristallen N2 - This study comprehensively investigated the thermal properties and phase behavior of lithium niobate-tantalate (đżđ‘–đ‘đ‘đ‘„đ‘‡đ‘Ž1âˆ’đ‘„đ‘‚3, LNT) solid solutions. The research used experimental techniques to explore the variation of the ferroelectric Curie temperature (Tc) as a function of composition. LNT single crystals were grown using the Czochralski method. The elemental composition of niobium (Nb) and tantalum (Ta) in these crystals was determined using X-ray fluorescence (XRF) analysis. Small, compositionally homogeneous samples were then selected for differential scanning calorimetry (DSC) measurements to determine specific heat capacities (Cp). The DSC measurements revealed a linear decrease in Tc with increasing Ta concentration in the LNT solid solution crystals. Additionally, the ferroelectric transition width was observed to be narrower in mixed crystals compared to pure LT. Differential Thermal Analysis (DTA) and crystal growth experiments were performed further to understand the phase behavior of LNT solid solutions. The heats of fusion for the end members, LN and LT, were measured using DTA, yielding values of 103 kJ/mol at 1531 K for LN and 289 kJ/mol at 1913 K for LT. These values were used as input parameters in a thermodynamic solution model implemented in the Factsage software. The solution model enabled the calculation of a phase diagram for LNT solid solutions, which was further optimized in the Calphad Factsage. Thermodynamic parameters for the Gibbs free energy of mixing of the solid solution were also generated. The resulting phase diagram showed good agreement with the experimental data. Additionally, the temperature-dependent thermal conductivity of pure LN, LT, and LNT solid solutions and selected doped LN and LT crystals (Mg, Zn) was investigated. Measurements were conducted across a temperature range from 300 K to 1300 K. The findings indicated that thermal conductivity increases with temperature, especially above 800 K, with a more pronounced effect in tantalum-rich solutions. The interplay of the Nb/Ta ratio and doping effects was particularly significant at high temperatures. These insights into the thermal conductivity of LNT and doped LN and LT crystals are crucial for optimizing growth conditions. Understanding thermal conductivity helps ensure homogeneous crystallization during the growth process, which remains a challenge in the production of LNT single crystals. N2 - Diese Arbeit fĂŒhrte eine umfassende Studie zur Untersuchung der thermischen Eigenschaften und Phasenverhalten von Lithiumniobat-Tantalat (đżđ‘–đ‘đ‘đ‘„đ‘‡đ‘Ž1âˆ’đ‘„đ‘‚3, LNT) Mischkristalle durch. Die Forschung nutzte experimentelle Techniken, um die Variation der ferroelektrischen Curie-Temperatur (Tc) in AbhĂ€ngigkeit von der Zusammensetzung zu untersuchen. LNT-Einkristalle wurden mit der Czochralski-Methode gezogen. Die Elementzusammensetzung von Niob (Nb) und Tantal (Ta) in diesen Kristallen wurde mittels Röntgenfluoreszenzanalyse (XRF) bestimmt. Kleine Proben mit homogener Zusammensetzung wurden dann fĂŒr Differential-Scanning-Kalorimetrie (DSC)-Messungen ausgewĂ€hlt, um die spezifischen WĂ€rmekapazitĂ€ten (Cp) zu bestimmen. Die DSC-Messungen zeigten eine lineare Abnahme der Tc mit zunehmender Ta-Konzentration in den LNT-Festlösungskristallen. ZusĂ€tzlich wurde beobachtet, dass die ferroelektrische Übergangsbreite in Mischkristallen enger war als in reinem LT. Differenzielle Thermoanalyse (DTA) und Kristallwachstumsexperimente wurden durchgefĂŒhrt, um das Phasenverhalten von LNT-Festlösungen weiter zu verstehen. Die SchmelzwĂ€rme der Endglieder LN und LT wurde mittels DTA gemessen und ergab Werte von 103 kJ/mol bei 1531 K fĂŒr LN und 289 kJ/mol bei 1913 K fĂŒr LT. Diese Werte wurden als Eingabeparameter in ein thermodynamisches Lösungsmodell verwendet, das in der Factsage-Software implementiert ist. Das Lösungsmodell ermöglichte die Berechnung eines Phasendiagramms fĂŒr LNT-Festlösungen, das weiter in Calphad Factsage optimiert wurde. Thermodynamische Parameter fĂŒr die freie Mischungsenthalpie der Mischkristallen wurden ebenfalls generiert. Das resultierende Phasendiagramm zeigte eine gute Übereinstimmung mit den experimentellen Daten. ZusĂ€tzlich wurde die temperaturabhĂ€ngige WĂ€rmeleitfĂ€higkeit von reinem LN, LT und LNT-Festlösungen sowie ausgewĂ€hlten dotierten LN- und LT-Kristallen (Mg, Zn) untersucht. Messungen wurden ĂŒber einen Temperaturbereich von 300 K bis 1300 K durchgefĂŒhrt. Die Ergebnisse zeigten, dass die WĂ€rmeleitfĂ€higkeit mit der Temperatur zunimmt, insbesondere ĂŒber 800 K, mit einem ausgeprĂ€gteren Effekt in tantalreichen Lösungen. Das Zusammenspiel des Nb/Ta-VerhĂ€ltnisses und der Dotierungseffekte war bei hohen Temperaturen besonders signifikant. Diese Erkenntnisse zur WĂ€rmeleitfĂ€higkeit von LNT- und dotierten LN- und LT-Kristallen sind entscheidend fĂŒr die Optimierung der Wachstumsbedingungen. Das VerstĂ€ndnis der WĂ€rmeleitfĂ€higkeit trĂ€gt dazu bei, eine homogene Kristallisation wĂ€hrend des Wachstumsprozesses sicherzustellen, was nach wie vor eine Herausforderung bei der Herstellung von LNT-Einkristallen darstellt. KW - Thermal conductivity KW - Lithium niobate tantalate KW - Mixed crystals KW - Crystal growth KW - Thermal analysis KW - Phase diagram KW - Mischkristalle KW - KristallzĂŒchtung KW - Thermische Analyse KW - Phasendiagramm KW - WĂ€rmeleitfĂ€higkeit KW - Tantalate KW - Lithium KW - Niob KW - Mischkristall KW - Phasendiagramm KW - TemperaturabhĂ€ngigkeit KW - Phasengleichgewicht Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-69813 ER - TY - BOOK A1 - Fischer, Saskia M. A1 - Kansok-Dusche, Julia A1 - BartholomĂ€us, Peter A1 - Bilz, Ludwig ED - Bilz, Ludwig T1 - Schule ohne Hass : praxisbezogene Ergebnisse einer Untersuchung zur QualitĂ€t von Anti-Hatespeech-Programmen T1 - School without hate : practical results of a study on the quality of anti-hate speech programs N2 - Junge Menschen werden online, aber auch im Schulalltag zunehmend Zeug:innen, Ziel und mitunter auch AusĂŒbende von Hatespeech. Hatespeech ist eine Form menschenfeindlicher Äußerungen und stellt Schulen, zu deren Aufgaben auch Demokratiebildung gehört, vor besondere Herausforderungen. Um SchĂŒler:innen fĂŒr Hatespeech zu sensibilisieren, sie beim Umgang mit Hatespeech-Situationen zu unterstĂŒtzen und ihnen erfolgreiche Strategien gegen Hatespeech zu vermitteln, steht eine Vielzahl an Anti-Hatespeech-Programmen zur VerfĂŒgung, deren Zielsetzungen, Umfang und QualitĂ€t sich stark voneinander unterscheiden. In einer durch das Bundesministerium fĂŒr Familie, Senioren, Frauen und Jugend im Rahmen des Bundesprogramms „Demokratie leben!“ geförderten Studie wurden national und international verfĂŒgbare Anti-Hatespeech-Programme ermittelt und einer systematischen QualitĂ€tsanalyse unterzogen. Dabei wurden 16 QualitĂ€tskriterien einbezogen, die sowohl aus wissenschaftlicher als auch aus praxisbezogener Perspektive ermittelt wurden. Insgesamt wurden 27 Anti-Hatespeech-Programme eingeschĂ€tzt. In dieser Publikation werden die zentralen Ergebnisse zu den 27 Programmen praxisnah vorgestellt, sodass Praktiker:innen an Schulen eine fundierte Auswahl treffen können. Dazu werden die zentralen Inhalte, Zielgruppen und Kontextbedingungen wie z. B. Dauer, Format und Kosten, aber auch die Ergebnisse der QualitĂ€tseinschĂ€tzung fĂŒr jedes der 27 Programme vorgestellt. FĂŒr ausgewĂ€hlte Situationen und Zielstellungen werden einzelne Programme exemplarisch nĂ€her beschrieben. Generelle Empfehlungen fĂŒr die Auswahl von Programmen inklusive einer Checkliste runden die Publikation fĂŒr Praktiker:innen ab. N2 - Young people are increasingly witnesses, targets, and sometimes also perpetrators of hate speech. Hate speech is a form of derogatory expression and challenges schools in particular, whose tasks also include democratic education. To raise students’ awareness about hate speech, support them in dealing with hate speech, and teach them how to appropriately react to hate speech, a variety of anti-hate-speech programs are available. These programs vary greatly in their objectives, scope, and quality. In a study funded by the Federal Ministry for Family Affairs, Senior Citizens, Women, and Youth as part of the federal program “Demokratie leben!”, nationally and internationally available anti-hate-speech programs were identified. A systematic quality assessment was conducted for each program. Sixteen different quality criteria were taken from both a scientific and a practical perspective. A total of 27 anti-hate-speech programs were assessed. This publication presents the key results of the 27 programs in a practical way so that practitioners in schools can make an informed choice. To this end, the central content, target groups, and contextual conditions, such as duration, format, and costs, as well as the results of the quality assessment for each of the 27 programs are presented. A few programs are described in more detail regarding selected practical applications and objectives. General recommendations for the selection of programs, including a checklist, complete the publication for practitioners. T3 - Schriftenreihe des Instituts fĂŒr Gesundheit - 8 KW - Hate speech KW - Diskriminierung KW - Hassrede KW - Intervention KW - Kind KW - Jugend KW - PrĂ€vention KW - Schule KW - Hassrede KW - Schule KW - Programme KW - QualitĂ€t KW - School KW - Quality assessment Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-69497 SN - 978-3-940471-81-9 ER - TY - THES A1 - Tallarek, Marie Josefine T1 - Wie erleben geburtsbegleitende Hebammen in Deutschland die Selbstbestimmung GebĂ€render? : eine Grounded Theory Studie T1 - How do midwives in Germany experience women’s birth autonomy? : a grounded theory study N2 - Hintergrund und Fragestellung GebĂ€rende haben ein Recht auf eine bestmögliche Geburtshilfe. Vor dem Hintergrund der Frage, was eine gute Geburtshilfe ausmacht, hat das Schlagwort der „selbstbestimmten Geburt“ Einzug in öffentliche und fachliche Diskurse gehalten. Allerdings fehlen derzeit empirisch informierte Theorien dahingehend, was Selbstbestimmung fĂŒr Hebammen in Deutschland konkret bedeutet, welchen Bedingungen sie unterliegt und wie sie unter der Geburt verhandelt wird. Entsprechend untersucht die Studie die Forschungsfrage: „Wie erleben geburtsbegleitende Hebammen in Deutschland die Selbstbestimmung GebĂ€render?“ Methodik Die Forschungsfragen wurden mittels der Grounded Theory Methodologie in der Ausrichtung nach Strauss und Corbin sowie Breuer et al. bearbeitet. Es wurden leitfadengestĂŒtzte problemzentrierte Einzelinterviews mit 12 werdenden und ausgebildeten Hebammen aus unterschiedlichen Settings gefĂŒhrt. Die Interviews wurden im Zeitraum 2021 – 2023 gefĂŒhrt, aufgezeichnet, transkribiert und pseudonymisiert. Die Interviewdaten wurden gemĂ€ĂŸ dem Grounded Theory Ansatz mittels des offenen, axialen und selektiven Kodierens mithilfe der Software MaxQDA analysiert. Ergebnisse Es wurden drei verschrĂ€nkte Modelle entwickelt: Das i) Kodierparadigma gibt Aufschluss ĂŒber das PhĂ€nomen „Selbstbestimmung GebĂ€render“, seine Bedingungen, die mit ihm verbundenen Handlungsstrategien der Hebammen und seine Konsequenzen. Das ii) Handlungsmodell zum Umgang von Hebammen mit den PrĂ€ferenzen GebĂ€render beinhaltet sieben Handlungsschritte, die von allen Hebammen durchlaufen werden. Das iii) Beziehungsmodell theoretisiert die Art und Weise, wie die zwischenmenschliche Beziehung innerhalb jedes Handlungsschritts gestaltet wird. Da die Hebammen auf vielfĂ€ltige AnsprĂŒche „antworten“ und die Geburtssituation „ver-antworten“, wird vorgeschlagen, statt des eng gefassten Begriffs der „selbstbestimmten Geburt“ von einer durch die Hebammen „verAntwortlichten Selbstbestimmung GebĂ€render“ auszugehen. Diskussion Die Modelle tragen zum theoretischen VerstĂ€ndnis der Selbstbestimmung GebĂ€render, ihrer Entstehung und ihrer Grenzen aus der Sicht geburtsbegleitender Hebammen bei. Somit schließen sie mit neuen Erkenntnissen an aktuelle hebammenwissenschaftliche Diskurse – wie bspw. zur Förderung einer frauzentrierten und respektvollen Geburtshilfe – an. Die entwickelten Modelle, einschließlich des vorgeschlagenen Begriffs der durch die Hebamme „verAntwortlichten Selbstbestimmung“ GebĂ€render, bergen das Potenzial, das Spannungsfeld zwischen der Achtung der Selbstbestimmung GebĂ€render sowie der Verantwortung fĂŒr FĂŒrsorge und Schadensvermeidung durch Geburtshelfende konstruktiv miteinander zu verbinden. N2 - Background and research question Persons giving birth have a right to receive the highest attainable quality of obstetric care. Against the backdrop of the question of what constitutes good obstetric care, the buzzwords "self-determined birth" or „birth autonomy“ are often referred to in public and professional discourses. However, there remains a lack of empirically informed theories as to what self-determination actually means for midwives in Germany, how it is determined and how it is negotiated during birth. This study, therefore, examines the research question: "How do midwives attending births in Germany experience the self-determination of persons giving birth?" Methods The research questions were addressed using Grounded Theory Methodology according to Strauss and Corbin and Breuer et al. Semi-structrued, problem-centered individual interviews were conducted with 12 midwives. The midwives worked in different settings (clinic; midwife-led delivery room; birth center; home birth) in seven federal states and had a heterogeneous age structure and professional experience. The interviews were conducted, recorded, transcribed and pseudonymized between 2021 and 2023. The interview data was analyzed according to the Grounded Theory Approach using open, axial and selective coding with the help of MaxQDA software. Results Tree interrelated models were developed: The i) coding paradigm provides information about the phenomenon of "self-determination of persons giving birth", its conditions, the midwives' action strategies associated with it and its consequences. The ii) action model suggests seven action steps that all midwives pass in dealing with the preferences of persons giving birth. The iii) relationship model theorizes the way in which the interpersonal relationship is built within each action step. As the midwives "respond" to a variety of demands and "take respons-ibility" for the birth situation, it is suggested that the narrow concept of "self-determined birth" should be replaced by a "respons(e)ible self-determination of persons giving birth". Discussion The models contribute to a better theoretical understanding of the self-determination of persons giving birth, its development and its limits. They thus provide new insights into current discourses in midwifery and health policy, such as the promotion of family-centered and respectful maternity care. Conclusion The concept of „respons(e)ible self-determination“ has the potential to constructively combine recently debated positions between the priorities of a right to self-determination and midwives‘ duties of care and nonmaleficience. KW - Selbstbestimmung KW - Geburt KW - Verantwortung KW - Beziehungsgestaltung KW - Birth autonomy KW - Self-determination KW - Birth KW - Responsibility KW - Relationship building KW - Geburtshilfe KW - Hebamme KW - Selbstbestimmung KW - Verantwortung KW - Obstetrics KW - Midwife KW - Self-determination KW - Responsibility KW - Grounded theory Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-69500 ER - TY - THES A1 - Li, Qiong T1 - Laboratory hard X-ray microscopy studies on pollen and diatoms T1 - Laboruntersuchungen mittels harter Röntgenmikroskopie an Pollen und Diatomeen N2 - This PhD thesis was focused on the application of the nano-XCT in study of biological materials and the development of the methodologies on study the structure and mechanical properties of biological materials. The whole unstained pollen was chosen as an example of carbon-based biological objects and imaged non-destructively. Specifically, both surface and inner structure of the unstained Pinus pollen grain and dandelion pollen grain were clearly visualized by nano-XCT. With the segmentation and rendering of the reconstructed 3D data from Pinus pollen grain according to the clear boundaries among the pollen wall and the inner structures, the detailed structures and the volumes of these different parts (exine, intine and cellular structure) were analyzed and calculated. Furthermore, Zernike phase contrast mode provides the necessary contrast for imaging of unstained carbon-based biological objects such as whole Pinus pollen. As one of the noncarbon-based biological objects, the morphology and mechanical behavior of diatom frustules and diatoms were studied by nano-XCT. A detailed comparison study of the 3D morphology of the frustules from D. geminata using nano-XCT and SEM/FIB showed that the tomographic data from nano-XCT allows arbitrary cross-sections through diatom frustules to access detailed morphology information. By using the 3D data of diatom frustule, it is able to reveal the information of the pore structure and the pore size. Nano-XCT combined with in-situ mechanical compression tests studied the 3D morphology of the frustules and, at the same time to correlate the structure with the mechanical properties of the whole individual frustules. The results show that the maximum loading force is related to the dimension of the frustule and the valve face, as well as the linking region of the epivalve and hypovalve are the weak spots. Besides, in order to study the biological objects at real or near-real environmental conditions, a house designed sample holder was integrated into an X-ray microscope and used to study the wet biological sample, i.e. to study the morphology, the volume changes and the mechanical properties of the whole diatom cells while changing from wet state to dry state. The results show that about 16% volume shrinkage of the diatoms after drying and the maximum loading force is in the range of several hundred ÎŒN for the diatoms in the wet state and single-digit mN in the dry state. Furthermore, the normalized stiffness of diatoms in the dry state is much higher in wet state. Compared with the diatom cells in dry state, the area to connect the valve face and the girdle band is the weak spots under the compression in the wet state, while the valve face and the girdle band itself could crack under the compression in the dry state. N2 - Diese Dissertation zielt darauf ab, die Anwendung der Röntgennanotomographie (Nano-XCT) bei der Untersuchung biologischer Materialien zu erweitern und die Entwicklung von Methoden zur Untersuchung der Struktur und mechanischen Eigenschaften dieser biologischen Materialien voranzutreiben. Die einzelne Pollenkörner, als eines der kohlenstoffbasierten biologischen Objekte, wurden im natĂŒrlichen Zustand zerstörungsfrei abgebildet. Insbesondere werden sowohl die OberflĂ€chen- als auch die inneren Strukturen von Kiefern- und Löwenzahnpollen mit Hilfe des Nano-XCT deutlich sichtbar gemacht. Die Segmentation und Rendern der computertomografischen Daten nach der klaren Unterscheidung zwischen der Zellwand und den inneren Strukturen ermöglicht eine dreidimensionale, farbkodierte Visualisierung der Zellwand und der inneren Strukturen, sowie die quantitative Bestimmung der Volumen dieser Komponenten (Exine, Intine und zellulĂ€re Struktur). Außerdem bietet die Anwendung des Zernike-Phasenkontrast-Modus den erforderlichen Kontrast, um solche Objekte kontrastreicher abzubilden. Als eines der nicht kohlenstoffbasierten biologischen Objekte wurden die Morphologie und mechanischen Eigenschaften der Kieselalgenfrusteln und Kieselalgen mittels Nano-XCT untersucht. Eine detaillierte Vergleichsstudie von Nano-XCT und SEM/FIB zeigte anhand der Frusteln von D. geminata, dass nur mit Nano-XCT zerstörungsfrei beliebige Querschnitte durch Frusteln möglich sind, um detaillierte Informationen zur Morphologie zu erhalten. Die 3D-Daten der Kieselalgen wurden analysiert, um Kenndaten ĂŒber die Porenstruktur und der PorengrĂ¶ĂŸe zu erhalten. Diese Kenndaten wurden fĂŒr die Modellierung und Simulation verwendet, um Informationen fĂŒr das Design von Verbundwerkstoffen bereitzustellen. Nano-XCT in Kombination mit in-situ-Kompressionstests erforschte die 3D-Morphologie der Frusteln und korrelierte gleichzeitig die Struktur mit den mechanischen Eigenschaften der gesamten einzelnen Frusteln. Die Ergebnisse zeigen, dass die maximale Belastungskraft von den Abmessungen der Frusteln abhĂ€ngt und dass der Verbindungsbereich von Epivalve und Hypovalve die Schwachstelle darstellt. Um Kieselalgen unter nahezu realen Umweltbedingungen zu untersuchen, wurde ein selbst entwickelter Probenhalter in ein Röntgenmikroskop integriert und verwendet. So konnten die Änderungen der Morphologie und des Volumens der Kieselalgen beim Übergang vom feuchten zum trockenen Zustand gemessen und mit Änderungen der mechanischen Eigenschaften korreliert werden. Die Ergebnisse zeigen, dass die Volumenschrumpfung der Kieselalgen nach dem Trocknen etwa 16% betrĂ€gt. Die maximale Belastungskraft fĂŒr die Kieselalgen im feuchten Zustand liegt im mehrere hundert ”N -Bereich und im trockenen Zustand einstellige mN -Bereich. DarĂŒber hinaus ist die normalisierte Steifigkeit von Kieselalgen im trockenen Zustand viel höher als im nassen Zustand. Verglichen mit den Diatomeen Zellen im trockenen Zustand ist der Übergangsbereich zwischen Valve und GĂŒrtelband die mechanisch schwĂ€chste Stelle der Zellen im feuchten Zustand. In trockenem Zustand brechen dann jedoch Valve und GĂŒrtelband zuerst. KW - Pollen grain KW - Diatom KW - In-situ micromechanical behavior KW - Zernike phase contrast KW - X-Ray tomography KW - Pollenkorn KW - Diatomeen KW - In-situ mechanischen Verhalten KW - Zernike Phasenkontrast KW - Röntgennanotomographie KW - Röntgentopographie KW - Biologisches Material KW - Nanostruktur KW - Mechanische Eigenschaft Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-69708 ER - TY - THES A1 - Bartlitz, Christin T1 - Das zymogene Granulamembranglykoprotein 2 als Schalter fĂŒr die WirtsspezifitĂ€t und IndividualitĂ€t von Darminfektionen T1 - The major zymogen granule membrane glycoprotein 2 as switch for host specificity and individuality of intestinal infections N2 - Das zymogene Granulamembranglykoprotein 2 (GP2) wird hauptsĂ€chlich in den Acinuszellen des Pankreas und auf den M-Zellen der Peyer-Plaques im DĂŒnndarm exprimiert. Bakterien sind in der Lage, mittels Typ 1-Fimbrien (T1F) an Zuckerreste des GP2 und somit auch an Darmzellen zu binden. Das im Pankreas sezernierte und in den Darm ausgeschiedene GP2 kann demzufolge eine derartige bakterielle AdhĂ€sion unterbinden. Ebenso ist die Initiierung einer spezifischen mukosalen Immunantwort durch an GP2 gebundene Bakterien möglich. T1F sind bei Enterobacteriaceae hĂ€ufig vorkommende, adhĂ€sive OberflĂ€chenorganellen und stellen einen wichtigen Virulenzfaktor fĂŒr die AdhĂ€sion von pathogenen Escherichia coli an intestinale Zellen dar. Das eigentliche AdhĂ€sin ist dabei das FimH-Protein an der Spitze der Fimbrie. Bisher haben nur wenige Studien die AdhĂ€sion von E. coli an GP2 untersucht. Allerdings konnten schon mehrere Studien zeigen, dass eine Variation der FimH-Sequenz generell die Bindung von Bakterien an Wirtszellrezeptoren beeinflusst. Das Ziel dieser Arbeit war daher, die AdhĂ€sion verschiedener E. coli-Pathotypen an GP2-Isoformen von drei unterschiedlichen SĂ€ugetierarten zu vergleichen und den Einfluss der FimH-Sequenzvariation auf die Bindung hin zu untersuchen. DafĂŒr wurde zunĂ€chst die fimH-Sequenz von 180 E. coli-StĂ€mmen der Pathotypen enteropathogene (EPEC), enterotoxische (ETEC) und kommensale E. coli vom Menschen, Rind und Schwein bestimmt. Zwei bovine GP2-Isoformen wurden in Sf9-Insektenzellen exprimiert, welche mit jeweils zwei GP2-Isoformen von Mensch und Schwein in Bakterienbindungsstudien verwendet wurden. Zudem wurde eine Korrelation zwischen der GP2-Bindung und der FimH-Expression untersucht. FĂŒr Untersuchungen zur GP2-FimH-Interaktion wurde die OberflĂ€chenplasmonenresonanz eingesetzt. Außerdem wurde GP2 in bovinen Darmepithelzellen exprimiert und die Zellen fĂŒr AdhĂ€sionsstudien verwendet. Aus der fimH-Analyse resultierten 60 Allele und 30 FimH-Varianten. Die Bindung von E. coli an das GP2-Protein korrelierte mit der bakteriellen FimH-Expression. Obwohl einzelne E. coli-StĂ€mme besser oder schlechter an bestimmte GP2-Isoformen adhĂ€rierten, war weder eine generelle wirts- noch pathotypspezifische Bindung nachzuweisen. Allerdings banden die FimH-Proteine besser an die langen GP2-Isoformen. Ähnliche Ergebnisse zeigten Bindungsstudien unter Nutzung von Darmepithelzellen, die auf ihrer OberflĂ€che GP2 exprimierten. Einzelne E. coli-StĂ€mme banden besser oder schlechter, generelle Aussagen konnten nicht getroffen werden. Eine In-vitro-Infektionsstudie zeigte zudem, dass eine Vorbehandlung von E. coli mit GP2 eine Bindung dieser an Darmepithelzellen reduzierte. N2 - The zymogen granule membrane glycoprotein 2 (GP2) is mainly expressed in acinus cells of the pancreas and on M cells in Peyer’s patches in the small intestine. Bacteria are able to bind to sugar residues of GP2 and, thus, also to intestinal cells by using type 1 fimbria (T1F). GP2 secreted by the pancreas and excreted into the intestine can, therefore, prevent such bacterial adhesion. Likewise, the initiation of a specific mucosal immune response by bacteria bound to GP2 is possible. T1F are common adhesive surface organelles in Enterobacteriaceae and are an important virulence factor for the adhesion of pathogenic Escherichia coli to intestinal cells. The actual adhesin is the FimH protein on top of the T1F. So far, only a few studies have investigated the adhesion of E. coli to GP2. However, several studies have shown that a variation of the FimH sequence generally influences the binding of bacteria to host cell receptors. Therefore, the aim of this study was to compare the adhesion of different E. coli pathotypes to GP2 isoforms of three different mammalian species and to investigate the influence of FimH sequence variation on binding. Initially, the fimH sequence of 180 E. coli of the pathotypes enteropathogenic (EPEC), enterotoxic (ETEC) and commensal E. coli from human, cattle and pig were determined. Two bovine GP2 isoforms were expressed in Sf9 insect cells, which were used in bacterial binding studies with two GP2 isoforms each from human and pig. Additionally, a correlation between GP2 binding and FimH expression was investigated. Surface plasmon resonance was used for studies on GP2-FimH interaction. Furthermore, GP2 was expressed in bovine intestinal epithelial cells and the cells were used for adhesion studies. The fimH gene analysis resulted in 60 alleles and 30 FimH variants. The binding of E. coli to the GP2 protein correlated with bacterial FimH expression. Although individual E. coli adhered better or worse to certain GP2 isoforms, neither a general host-specific nor a general pathotype-specific binding could be detected. The GP2-FimH interactions were more pronounced in the long GP2 isoforms and were dependent on the individual FimH variants. Binding studies using intestinal epithelial cells that expressed GP2 on the surface showed similar results. Individual E. coli strains bound better or worse, general statements could not be made. An in-vitro infection study showed that pre-treatment of E. coli with GP2 reduced binding to intestinal epithelial cells. KW - Intestinale Zelllinien KW - Intestinal cell lines KW - AdhĂ€sion KW - GP2-Isoformen KW - E. coli-Pathotypen KW - Adhesion KW - GP2 isoforms KW - E. coli pathotypes KW - Darm KW - Glykoproteine KW - ZelladhĂ€sion KW - Escherichia coli KW - Zelllinie Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-69091 ER - TY - THES A1 - Hausladen, Georg T1 - Technologie der Landschaft : auf den Spuren der Einheit der Technik bei Gilbert Simondon, ergĂ€nzt um einen Anhang zur Frage: Was sich mit Simondon von Wechselkröten und Kalkmagerrasen ĂŒber das Erfinden von Landschaften und konstruktives ökologisches Handeln lernen lĂ€sst T1 - Technology of the landscape : on the traces of the unity of technique with Gilbert Simondon, supplemented by an appendix on the question: What can be learned about the invention of landscapes and constructive ecological action with Simondon of green toads and calcareous grasslands N2 - Das Ziel dieser Arbeit ist es, zu zeigen, dass sich ein angemessenes, technisch vermitteltes VerhĂ€ltnis des Menschen zur Welt, eine zeitgemĂ€ĂŸe Technologie im Sinne Gilbert Simondons als eine der Landschaft begreifen lĂ€sst. Die Arbeit zeigt, dass Simondons Blick auf die Technik im Kern und nicht zufĂ€llig ein landschaftlicher ist. Die Bedeutung, die Simondon dem „Geografischen“, nicht zuletzt in seinen Überlegungen zur Technik, zumisst, kann als Ausdruck der fĂŒr das moderne Denken generell fundamentalen Konstitutionsfunktion der Landschaft als Ă€sthetischer Kategorie aufgefasst werden. Simondon blickt auf eine Landschaft der Technik, was dabei jedoch weitgehend fehlt, sind dezidierte Überlegungen zu einer auf Lebewesen bezogenen Technik, obwohl er gerade sie und insbesondere deren wissenschaftliche Fundierung als elementare Voraussetzung dessen erachtet, was er als „Einheit der Technik“ bezeichnet. Wie die Arbeit zeigt, kann die Ökologie und insbesondere der Ökosystembegriff als Ausdruck genau jenes fehlenden Teils erachtet werden. Eine der Einheit der Technik bei Simondon korrespondierende „Technologie“ findet ihren Ausdruck damit in der als Ökosystem begriffenen Landschaft, einer Mischung aus Menschlichem und NatĂŒrlichem, Abiotischem und Biotischem, Menschen, Maschinen, heterogenen Biospezies und unbelebter Materie. Entlang von Simondons Rezeptionsgeschichte wird in Kapitel 2 die Relevanz seines Denkens fĂŒr die Diskussion um den Begriff der Landschaft begrĂŒndet. Kapitel 3 demonstriert das Potenzial von Simondons Begriffsapparat fĂŒr die Strukturierung eines radikal relationalen Weltbilds. In Kapitel 4 werden Modi der Vermittlung dieser RelationalitĂ€t erschlossen, wobei sich die Landschaft als mittlere wie vermittelnde GrĂ¶ĂŸenordnung ausweisen lĂ€sst. Auf Basis von Simondons Ästhetikbegriff wird in Kapitel 5 die politische Bedeutung Ă€sthetischer Landschaft und das Problem Ă€sthetizistischen Handelns beleuchtet sowie der Begriff der Ă€sthetischen Anomalie als Konstitutionsmoment eines adĂ€quaten moralischen Handelns (sensu Simondon) vorgeschlagen. Kapitel 6 folgt der Spur des fehlenden Teils zur Einheit der Technik bei Simondon und beleuchtet dabei die Bedeutung eines ökologischen wie landschaftlichen Denkens sowie insbesondere des Ökosystembegriffs fĂŒr Simondons Technik- bzw. TechnologieverstĂ€ndnis. In Kapitel 7 werden in Anschluss an Simondons Begriff des Transindividuellen einige GrundzĂŒge der Funktionsweise transspezifischer Kollektive erschlossen, also Kollektiven nicht nur einer, sondern heterogenen Biospezies. In Kapitel 8 werden die Bedingungen einer adĂ€quaten „Technologie“ im Sinne Simondons rekapituliert und gezeigt, dass gerade eine „Technologie der Landschaft“ als eine „Technologie der Gegenwart“ aufgefasst werden muss. Im Anhang werden die Erkenntnisse der Arbeit auf eine konkrete Fallstudie bezogen, auf deren Basis schließlich die Möglichkeiten konstruktiven ökologischen Handelns ausgelotet werden. N2 - The aim of this work is to show that an appropriate, technically mediated human relationship to the world, a contemporary technology in the sense of Gilbert Simondon, can be understood as one of landscape. The work shows that Simondon’s view of technology is essentially and not coincidentally a landscape view. The importance that Simondon attaches to the “geographical”, not least in his reflections on technology, can be understood as an expression of the constitutive function of the “landscape” as an aesthetic category that is fundamental to modern thought in general. Simondon looks at a landscape of technology, but what is largely missing are decisive reflections on a technology related to living beings, although he considers it, and in particular its scientific foundation, to be an elementary prerequisite for what he calls the “unity of technic”. As the work shows, ecology and in particular the concept of ecosystems can be seen as an expression of precisely this missing part. A “technology” corresponding to Simondon’s unity of technic thus finds its expression in the landscape conceived as an ecosystem, a mixture of the human and the natural, the abiotic and the biotic, humans, machines, heterogenic biospecies and inanimate matter. Along Simondon's reception history, chapter 2 justifies the relevance of his thinking for the discussion on the concept of landscape. Chapter 3 demonstrates the potential of Simondon's conceptual apparatus for structuring a radically relational worldview. Chapter 4 explores modes of mediating this relationality, with the landscape proving to be both a mediating as well as a media scale. Based on Simondon's concept of aesthetics, chapter 5 examines the political significance of the aesthetic landscape along the problem of aestheticist action and proposes the concept of aesthetic anomaly as a constitutive moment of adequate moral action (sensu Simondon). Chapter 6 follows the trail of the missing part on the unity of technic Simondon’s and illuminates the significance of ecological and landscape thinking for his understanding of technology. In chapter 7, following Simondon's concept of the transindividual, some basic features of the functioning of trans-specific collectives, i.e. collectives of heterogeneous biospecies, are developed. Chapter 8 recapitulates the conditions of an adequate “technology” in Simondon's sense and shows that a “technology of the landscape” must be understood in certain ways as a “technology of the present”. In the appendix, the findings of the work are related to a concrete case study, that explores the possibility of constructive ecological action. KW - Landschaft KW - Simondon KW - Technologie KW - Ökologie KW - Landscape KW - Technology KW - Ecology KW - Simondon, Gilbert, 1924 - 1989 | Philosoph KW - Landschaft KW - Technologie KW - Ökologie KW - Ökosystem Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-69520 ER - TY - RPRT A1 - Zell, Sascha A1 - FĂŒgenschuh, Armin T1 - Optimizing autonomous unmanned aircraft system deployment locations for enhanced wildfire detection and monitoring T1 - Standortoptimierung autonomer unbemannter Flugsysteme zur fortgeschrittenen Erkennung und Beobachtung von WaldbrĂ€nden N2 - The increase in the frequency and severity of wildfires as a symptom of climate change requires innovative methods of wildfire fighting. For this reason, we propose a framework for an autonomous Unmanned Aircraft System (UAS), consisting of a fleet of Micro Air Vehicles (MAVs) stored in purpose-built hangars. The intention is to deploy the UAS as the first responder to an alarm and have the sensor-equipped MAVs monitor the target area even before other standard firefighting vehicles have arrived. The focus of this paper is primarily on the development and application of a location-allocation optimization Mixed-Integer Linear Programming (MILP) model that selects different MAV and hangar types and locates them, with the objective of approaching the target area as quickly as possible while guaranteeing a certain monitoring time at the scene. The model is applied to a large, sparsely populated, rural operational area, around a third of which consists of forest in the South of Brandenburg, Germany. The spatial demand is measured through an easily reproducible and transferable open data approach. Finally, several instances with different fixed numbers of hangars and MAVs to be set up are solved by the commercial state-of-the-art solver CPLEX and analyzed for their computation time. N2 - Die Zunahme der HĂ€ufigkeit und Schwere von WaldbrĂ€nden als Symptom des Klimawandels erfordert innovative Methoden der WaldbrandbekĂ€mpfung. FĂŒr diesen Zweck nutzen wir ein autonomes unbemanntes Luftfahrtsystem (Unmanned Aricraft System - UAS), das aus einer Flotte von Drohnen besteht, die in eigens dafĂŒr errichteten Hangars gelagert werden. Ziel ist, das UAS als Erstreaktion bei einem Alarm einzusetzen und die mit Sensoren ausgestatteten Drohnen das Zielgebiet beobachten zu lassen, noch bevor die ersten EinsatzkrĂ€fte vor Ort eintreffen. Der Fokus dieses Papers liegt in erster Linie auf der Entwicklung und Anwendung eines Modells der gemischt-ganzzahligen Programmierung (Mixed-Integer Linear Programming - MILP) zur Optimierung der Standortzuweisung. Es werden verschiedene Drohnen- und Hangartypen auswĂ€hlt und platziert, mit dem Ziel, die Einsatzbereiche so schnell wie möglich anzufliegen und gleichzeitig eine bestimmte Beobachtungszeit am Einsatzort zu garantieren. Das Modell wird auf ein großes, dĂŒnn besiedeltes, lĂ€ndliches Einsatzgebiet, das zu etwa einem Drittel aus Wald besteht, im SĂŒden von Brandenburg, Deutschland angewendet. Die rĂ€umliche Nachfrage wird durch einen leicht reproduzierbaren und ĂŒbertragbaren Ansatz mittels Open Data gemessen. Schließlich werden mehrere Instanzen mit unterschiedlichen festgelegten Anzahlen von Hangars und aufzustellenden MAVs mit dem kommerziellen State-of-the-Art Solver CPLEX gelöst und auf ihre Rechenzeit hin analysiert. T3 - Cottbus Mathematical Preprints - 32, 2025 KW - Mixed-lnteger linear programming KW - Unmanned aircraft systems KW - Micro air vehicles KW - Autonomous wildfire monitoring KW - Location-allocation optimization KW - Gemischt-ganzzahlige Programmierung KW - Drohnen KW - Drohnenhangar KW - Standortproblem KW - Autonome WaldbrandbekĂ€mpfung KW - Waldbrand KW - Überwachung KW - Drohne (Flugkörper) KW - Autonomes System KW - Standortproblem KW - Lineare Optimierung Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-69422 N1 - This paper is a preprint that will be published as a post-conference proceedings of the Optimization and Wildfire Conference (O&W) that took place in Luso, Portugal, 2024 in "Lecture Notes in Operations Research" by Springer. https://doi.org/10.1007/978-3-032-03108-2 ER - TY - THES A1 - Kaliamoorthy, Raghuram T1 - Water heritage Varanasi : an integrated conservation and development project for reviving the sacred waters and heritage ecologies T1 - Das Wassererbe Varanasi : ein integriertes Schutz- und Entwicklungsprojekt zur Wiederbelebung der heiligen GewĂ€sser und des ökologischen Erbes N2 - Water has been a pivotal force in the growth and sustenance of cities, playing a vital role in human survival. In India, a nation blessed with abundant resources, traditional water management systems have been efficiently employed. The significance of water in Hinduism extends beyond the practical, intertwining with religious beliefs and the cosmic cycle of Hindu myths. Cities in India have historically developed along rivers and water bodies, evolving into sacred sites that embody the nation’s cultural legacy. However, the rapid urbanization and modernization sweeping through India pose a formidable threat to these sacred cities, eroding their identity. Varanasi, often considered a microcosm of Indian heritage, is undergoing profound changes in its sacred landscape due to colonial policies and modern development. This transformation is evident in the diminishing catchment ecologies and the changing land use patterns over the past two decades. This research focuses on Varanasi’s water system as a key element in preserving its sacred landscape, intertwined with social, cultural, religious, and ecological dimensions. The study delves into the diverse typologies of water bodies spread across Varanasi, aiming to comprehend their transformations. The objective is to formulate a conservation and management plan that recognizes the intrinsic connection between Varanasi’s sacred waters and its heritage ecologies. The research seeks to develop a comprehensive framework and integrated strategies, complete with a site-specific action plan. Using the Durga Kund area as a model, the study envisions and designs strategies for future development. By crafting a holistic, site-specific approach to revitalizing and preserving the city’s sacred water resources, the research aims to elevate the importance of water management in Varanasi’s overall management plan. The proposed framework can serve as a model for cities sharing strong religious beliefs and facing threats to their water infrastructure. It offers a blueprint for reviving and safeguarding sacredscapes through integrated water management, applicable at both the regional and city levels. N2 - Wasser ist eine zentrale Kraft fĂŒr das Wachstum und den Unterhalt von StĂ€dten und spielt eine entscheidende Rolle fĂŒr das Überleben der Menschen. In Indien, einer Nation, die mit reichlichen Ressourcen gesegnet ist, wurden traditionelle Wassermanagement-Systeme effizient eingesetzt. Die Bedeutung des Wassers im Hinduismus geht ĂŒber das Praktische hinaus und ist mit dem religiösen Glauben und dem kosmischen Zyklus der hinduistischen Mythen verwoben. StĂ€dte in Indien haben sich historisch entlang von FlĂŒssen und GewĂ€ssern entwickelt und sind zu heiligen StĂ€tten geworden, die das kulturelle Erbe des Landes verkörpern. Die rasante Urbanisierung und Modernisierung, die Indien durchzieht, stellt jedoch eine große Bedrohung fĂŒr diese heiligen StĂ€dte dar und untergrĂ€bt ihre IdentitĂ€t. Varanasi, das oft als Mikrokosmos des indischen Kulturerbes betrachtet wird, macht aufgrund der Kolonialpolitik und der modernen Entwicklung tiefgreifende VerĂ€nderungen in seiner heiligen Landschaft durch. Dieser Wandel zeigt sich in den schwindenden Ökosystemen der Wassereinzugsgebiete und den verĂ€nderten Landnutzungsmustern der letzten zwei Jahrzehnte. Diese Untersuchung konzentriert sich auf das Wassersystem von Varanasi als SchlĂŒsselelement fĂŒr die Erhaltung der heiligen Landschaft, das mit sozialen, kulturellen, religiösen und ökologischen Dimensionen verwoben ist. Die Studie befasst sich mit den verschiedenen Arten von GewĂ€ssern in Varanasi und versucht, deren VerĂ€nderungen zu verstehen. Ziel ist es, einen Erhaltungs- und Bewirtschaftungsplan zu formulieren, der die enge Verbindung zwischen den heiligen GewĂ€ssern von Varanasi und seinem ökologischen Erbe anerkennt. Im Rahmen der Forschung sollen ein umfassender Rahmen und integrierte Strategien entwickelt werden, die durch einen standortspezifischen Aktionsplan ergĂ€nzt werden. Am Beispiel des Durga-Kund-Gebiets werden in der Studie Strategien fĂŒr die kĂŒnftige Entwicklung entworfen. Durch die Ausarbeitung eines ganzheitlichen, ortsspezifischen Ansatzes zur Wiederbelebung und zum Erhalt der heiligen Wasserressourcen der Stadt zielt die Studie darauf ab, die Bedeutung des Wassermanagements im Gesamtmanagementplan von Varanasi hervorzuheben. Der vorgeschlagene Rahmen kann als Modell fĂŒr StĂ€dte dienen, die einen starken religiösen Glauben teilen und deren Wasserinfrastruktur bedroht ist. Er bietet einen Entwurf fĂŒr die Wiederbelebung und den Schutz heiliger FlĂŒsse durch integriertes Wassermanagement, der sowohl auf regionaler als auch auf stĂ€dtischer Ebene anwendbar ist. KW - Water system KW - Sacred Landscape KW - Varanasi KW - Heritage Ecologies KW - Integrated Strategies KW - Wassersystem KW - Heilige Landschaft KW - Varanasi KW - Ökologisches Erbe KW - Integrierte Strategien KW - Varanasi KW - Wasserwirtschaft KW - Kulturerbe KW - Entwicklungsprojekt Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-65267 ER - TY - JOUR A1 - Liedtke, Victoria A1 - Wartmann, Thomas A1 - Shi, Wenjie A1 - Kahlert, Ulf D. T1 - Linking LEDGF/p75 overexpression with microsatellite instability and KRAS mutations : a small-scale study in colorectal cancer JF - Cancer Control N2 - Colorectal cancer (CRC) ranks third in men and second in women, with 153,020 new cases and 52,550 deaths in 2023, and with a projected incidence of 2.2 million new cases by 2030 due to lifestyle changes and enhanced diagnostic capabilities. Identification and analysis of new biomarkers, like lens epithelium-derived growth factor splice variant of 75 kDa (LEDGF/p75), which is known to play a crucial role as stress-related oncogene, can make a significant contribution in facilitating early CRC detection. This study analyzed the expression of LEDGF/p75 and the ubiquitin E2 conjugating enzyme UBC13 in 15 CRC tissue samples and adjacent non-tumor tissues. All patient samples underwent NGS-based mutation analysis beforehand. The western blot technique was used for protein analysis, and the results were further validated using mRNA expression data from 521 patient samples from the TCGA database. LEDGF/p75 expression was significantly elevated in nearly all tumor tissue samples compared to adjacent tissue (11/15, 73.3%). Additionally, the UBC13 enzyme, a key regulator in the degradation of signaling molecules, was also increased in most tumor tissue samples (9/15, 60.0%). Co-overexpression of LEDGF/p75 and UBC13 was evident in 6/6 patients. Patients with KRAS and MSH2 mutations showed a 75% and 100% correlation with LEDGF/p75 overexpression, respectively. This study confirms the upregulation of LEDGF/p75 in CRC and shows its correlation with KRAS and MSH2 mutations. The interaction of LEDGF/p75 with DNA damage response proteins may contribute to drug resistance and increased tumor aggressiveness. LEDGF/p75’s potential as a prognostic biomarker independent of lymph node involvement or CEA levels highlights its potential in personalized therapy, and warrants further research into its therapeutic targeting. KW - LEDGF/p75 KW - Colorectal cancer KW - Biomarker KW - Personalized therapy KW - DNA repair Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-69673 VL - 32 SP - 1 EP - 9 PB - Sage CY - London ER - TY - JOUR T1 - Amtliches Mitteilungsblatt der BTU Cottbus–Senftenberg, 2025,05 (12.02.2025) N2 - Satzung zur Einrichtung eines externen Beratungsgremiums fĂŒr die Brandenburgische Technische UniversitĂ€t Cottbus–Senftenberg vom 17. Oktober 2024 T3 - Amtliches Mitteilungsblatt der BTU Cottbus–Senftenberg - 2025, H. 05 Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-68331 ER - TY - THES A1 - Giering, Oliver T1 - Die digitale Transformation der Arbeitswelt in Deutschland : empirische Analysen zu digitalisierten ArbeitsplĂ€tzen, KĂŒnstlicher Intelligenz und ArbeitsqualitĂ€t T1 - The digital transformation of the world of work in Germany : empirical analyses of digitalised workplaces, artificial intelligence, and work quality N2 - Die Arbeitswelt unterliegt kontinuierlichen VerĂ€nderungen, die seit einigen Jahren vor allem durch die digitale Transformation geprĂ€gt sind. Insbesondere die Verbreitung digitaler Technologien und der Einsatz KĂŒnstlicher Intelligenz (KI) werden als treibende KrĂ€fte fĂŒr tiefgreifende VerĂ€nderungen in BeschĂ€ftigung, Qualifikationen, TĂ€tigkeiten und ArbeitsqualitĂ€t angesehen. Der Diskurs wird dabei vorwiegend durch technikdeterministische und ökonomische Zukunftsvisionen dominiert. Allerdings finden sich nur wenige quantitative Studien, die die Verbreitung und Auswirkungen der Digitalisierung auf ArbeitsplĂ€tze und KI untersuchen, sodass die konkreten Entwicklungen nur grob abgeschĂ€tzt werden können. Die vermuteten Auswirkungen der Digitalisierung werden hĂ€ufig als unvermeidlich beschrieben, wobei die Nutzung digitaler Technik und KI als recht unkompliziert und die Folgen als eindeutig angesehen werden. In der soziologischen Arbeitsforschung wird jedoch betont, dass die Verbreitung und Nutzung digitaler Technologien von einer Vielzahl sozialer, technischer, organisatorischer und ökonomischer Faktoren abhĂ€ngen, die miteinander in Beziehung stehen. Daher erscheint die Vorstellung eines radikalen Wandels der Arbeitswelt durch digitale Technologien und KI fragwĂŒrdig. Die Dissertation untersucht, wie moderne digitale Technologien und KI an deutschen ArbeitsplĂ€tzen bereits genutzt werden, welche Faktoren ihre Verbreitung beeinflussen und welche Auswirkungen sie auf die ArbeitsqualitĂ€t der BeschĂ€ftigten haben. Dazu wurden Daten des Sozio-oekonomischen Panels (SOEP) genutzt, das 2019 und 2020 systematisch die Digitalisierung am Arbeitsplatz in Deutschland erfasste. ZusĂ€tzlich wird auf das IAB-Betriebspanel von 2017 zurĂŒckgegriffen, um ZusammenhĂ€nge zwischen organisationalen Merkmalen und der Verbreitung digitaler Technologien zu analysieren. Es konnten zahlreiche soziale, technische und organisatorische Bedingungen identifiziert werden, die die EinfĂŒhrung und Nutzung moderner digitaler Technik und KI am Arbeitsplatz beeinflussen. Die Ergebnisse zeigen, dass die Digitalisierung nicht gleichmĂ€ĂŸig ĂŒber alle Arbeitsbereiche hinweg erfolgt, sondern in bestimmten Bereichen stĂ€rker verbreitet ist. Zudem können die Auswirkungen digitaler Technik auf die ArbeitsqualitĂ€t nicht ohne BerĂŒcksichtigung des Arbeitskontexts verstanden werden. Die Auswirkungen auf die BeschĂ€ftigten sind dabei heterogen und kontextabhĂ€ngig. Ein eindeutiger Zusammenhang zwischen der Nutzung von KI und beruflicher Autonomie konnte empirisch nicht nachgewiesen werden; vielmehr sind vielfĂ€ltige Faktoren fĂŒr die berufliche Autonomie entscheidend. Die Dissertation trĂ€gt insgesamt zu einem differenzierten, empirisch fundierten VerstĂ€ndnis der digitalen Transformation der Arbeitswelt bei. Sie verdeutlicht, dass die Digitalisierung Teil einer langfristigen Technisierung der Arbeitswelt ist, die auf historischen Entwicklungen basiert und keinen radikalen Bruch der Arbeitswelt darstellt. N2 - The world of work is continuously transforming, primarily driven by the digital transformation in recent years. In particular, the diffusion of digital technologies and the use of Artificial Intelligence (AI) are seen as driving forces behind profound changes in employment, qualifications, tasks, and work quality. The discourse is largely dominated by technological determinist and economic visions of the future. However, there are only a few quantitative studies that examine the diffusion and impact of digitalisation and AI on workplaces, meaning that the concrete developments can only be roughly estimated. The presumed impacts of digitalisation are frequently characterised as inevitable, with the utilisation of digital technologies and AI perceived as straightforward and their consequences regarded as unequivocal. However, sociological research on work emphasises that the diffusion and use of digital technologies depend on a variety of social, technical, organisational, and economic factors that are interconnected. Therefore, the notion of a radical transformation of the world of work through digital technologies and AI appears questionable. This dissertation investigates how modern digital technologies and AI are being used in workplaces in Germany, which factors influence their diffusion, and what impact they have on the work quality of employees. Data from the Socio-Economic Panel (SOEP) were used, which systematically recorded the extent of digitalisation in the workplace in Germany in 2019 and 2020. Additionally, the IAB Establishment Panel from 2017 is used to analyse the relationships between organisational characteristics and the diffusion of digital technologies. Numerous social, technical, and organisational factors influencing the introduction and use of modern digital technology and AI in the workplace were identified. The results show that digitalisation does not occur uniformly across all areas of work but is more widespread in certain areas. Furthermore, the effects of digital technology on work quality cannot be understood without considering the work context. The impacts on employees are heterogeneous and context-dependent. An unequivocal link between the use of AI and autonomy could not be empirically established; rather, a variety of factors are decisive for autonomy. Overall, the dissertation contributes to a nuanced, empirically grounded understanding of the digital transformation of the world of work. It highlights that digitalisation is part of a long-term process of the technologisation of the world of work, which builds on historical developments rather than representing a radical break with the world of work. KW - Digitale Transformation KW - Arbeitswelt KW - Digitale Arbeitsmittel KW - KĂŒnstliche Intelligenz KW - ArbeitsqualitĂ€t KW - Digital Transformation KW - World of Work KW - Artificial intelligence KW - Digital Work Tools KW - Work Quality KW - ArbeitsqualitĂ€t KW - Arbeitswelt KW - Arbeitsmittel KW - Digitalisierung KW - KĂŒnstliche Intelligenz Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-69324 ER - TY - THES A1 - Beleniotis, Petros T1 - Physics-based trap modeling of GaN HEMTs T1 - Physikbasierte Trap-Modellierung von GaN-HEMTs N2 - Gallium nitride (GaN) high-electron-mobility transistors (HEMTs) have emerged as the preferred choice for telecommunication system designs, owing to their superior power levels compared to their silicon counterparts, especially at high frequencies and in harsh environments. Despite these advantages, reliable GaN HEMTs have been impeded by challenges such as electron trapping, which significantly impairs transistor functionality. Accurately modeling these effects is essential for the successful deployment of GaN-based designs. Over the past 15 years, the focus has been on empirical models suitable for circuit design. These models often result in a disconnect between modeling and technological advancements, thereby limiting further optimization of device performance. This study presents a novel trap model for GaN HEMTs that combines accuracy with physical principles. The model is broadly applicable, enabling the simulation of current collapse and knee walkout under various bias conditions, and is adaptable to RF applications with exceptional accuracy, through different trap-circuit configurations. The first model configuration is effective in simulating small- and large-signal continuous-wave (CW) RF measurements. It accurately mimics the slow response of electrons in traps to voltage reductions, ensuring efficient performance in simulations where traps maintain a steady state. Its accuracy has been validated through multiple measurements, including pulsed IV, S-parameter measurements, RF power sweeps, and load pull contours. Its development was enhanced by integrating experimental data and theoretical insights, which improved its accuracy and facilitated the development of additional analytical tools, such as statistical and compact modeling for trap localization. The second configuration is advantageous for pulsed RF and switching applications, as well as high-temperature environments. This configuration enables precise characterization of the swift capture time constant, a capability previously unattainable with conventional measurement techniques. Its development followed a systematic approach, beginning with the characterization of trap levels within the band gap of the devices, followed by the application of TCAD simulations to locate the position of traps and assess their impact on device performance. Ultimately, the second trap model configuration incorporates Shockley-Read-Hall (SRH) statistics to model temperature- and bias-dependent trapping, aiming to simulate the slow gate-induced trapping observed in rugged GaN-based low-noise amplifiers (LNAs). The inclusion of SRH statistics addresses significant challenges in GaN HEMT trap modeling. N2 - Galliumnitrid (GaN) High-Electron-Mobility-Transistoren (HEMT) haben sich als vorteilhaft fĂŒr die Entwicklung von Telekommunikationssystemen herausgestellt, da sie im Vergleich zu Silizium eine höhere Leistung aufweisen, insbesondere bei hohen Frequenzen und in rauen Umgebungen. Trotz dieser Vorteile wird die ZuverlĂ€ssigkeit von GaN-HEMTs durch Probleme wie Elektroneneinfang in Traps behindert, welches die Transistorfunktion erheblich beeintrĂ€chtigt. Die genaue Modellierung dieser Effekte ist fĂŒr den erfolgreichen Einsatz in GaN-basierten Schaltungen unerlĂ€sslich. In den letzten 15 Jahren lag der Schwerpunkt auf empirischen Modellen. Diese Modelle fĂŒhren hĂ€ufig zu einer Diskrepanz zwischen der Modellierung und dem realen Verhalten infolge der technologischen Fortschritte, was die weitere Optimierung der Bauelementleistung einschrĂ€nkt. In dieser Studie wird ein neuartiges Trap-Modell fĂŒr GaN-HEMTs vorgestellt, das Genauigkeit mit physikalischen Prinzipien verbindet. Das Modell ist vielfĂ€ltig anwendbar und ermöglicht die Simulation des Stromkollapses und des Knee-walkouts bei verschiedenen Vorspannungsbedingungen. Es ist durch unterschiedliche Modellkonfigurationen mit hoher Genauigkeit fĂŒr spezielle HF-Anwendungen anpassbar. Die erste Modellkonfiguration eignet sich fĂŒr die Simulation von HF-Messungen mit kleinen und großen Signalen im Dauerstrichbetrieb. Sie ahmt die langsame Reaktion von Elektronen in Traps auf Spannungsreduzierungen genau nach und gewĂ€hrleistet eine effiziente Beschreibung des elektrischen Verhaltens, wenn die Traps ihren Ladezustand beibehalten. Die Modellgenauigkeit wurde durch mehrere Messungen ĂŒberprĂŒft, darunter durch gepulste Strom-Spannungs- und S-Parameter-Messungen, HF-Leistungsvariations- und Load-Pull Kontur-Messungen. Die zweite Modellkonfiguration ist vorteilhaft fĂŒr gepulste HF- und Schaltanwendungen sowie fĂŒr Hochtemperaturumgebungen. Diese Konfiguration ermöglicht eine prĂ€zise Beschreibung der schnellen Einfangzeitkonstante der Traps, eine FĂ€higkeit, die bisher bei konventionellen Messtechniken nicht verfĂŒgbar war. Die Entwicklung folgte einem systematischen Ansatz, beginnend mit der Charakterisierung der Trapenniveaus innerhalb BandlĂŒcke der Halbleiterbauelemente, gefolgt von der Anwendung von TCAD-Simulationen zur rĂ€umlichen Lokalisierung der Traps und zur Bewertung ihrer Auswirkungen auf die Bauelementfunktion. Letztendlich beinhaltet die zweite Modellkonfiguration die Shockley-Read-Hall(SRH)-Statistik, um temperatur- und vorspannungsabhĂ€ngiges Trapping zu modellieren, mit dem Ziel, das langsame Gate-induzierte Trapping zu simulieren, das in robusten rauscharmen GaN-VerstĂ€rkern (LNAs) beobachtet wird. Durch die Einbeziehung der SRH-Statistik wird den erheblichen Herausforderungen bei der Modellierung von GaN-HEMT-Traps entsprochen. KW - Shockley-Read-Hall KW - GaN HEMT KW - Microwaves KW - Compact models KW - Trapping effects KW - Mikrowellen KW - Kompaktmodelle KW - Trapping-Effekte KW - HEMT KW - Galliumnitrid KW - Mikrowelle KW - Modellierung KW - Elektron Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-69331 ER - TY - JOUR T1 - Amtliches Mitteilungsblatt der BTU Cottbus–Senftenberg, 2025,04 (05.02.2025) N2 - Erste Änderungssatzung zur PrĂŒfungs- und Studienordnung fĂŒr den Master-Studiengang Hybrid Electric Propulsion Technology (M. Sc.) vom 04. Februar 2025 Lesefassung: Fachspezifische PrĂŒfungs- und Studienordnung fĂŒr den Master-Studiengang Hybrid Electric Propulsion Technology vom 05. Juli 2024 (AMbl. 19/2024) i. d. F. der Ersten Änderungssatzung zur PrĂŒfungs- und Studienordnung fĂŒr den Master-Studiengang Hybrid Electric Propulsion Technology (M. Sc.) vom 04. Februar 2025 T3 - Amtliches Mitteilungsblatt der BTU Cottbus–Senftenberg - 2025, H. 04 Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-68320 ER - TY - JOUR A1 - Witte, Eric T1 - Keine „Entaktualisierung“ der Patienteneinwilligung T1 - No automatic “invalidation” of patient consent due to timeout N2 - Die nachfolgende Darstellung betont die Bedeutung der Einwilligung, stellt deren sog. „Entaktualisierung“ die gegenwĂ€rtige Struktur des Einwilligungsrechts gegenĂŒber und kritisiert einschlĂ€gige Rechtsprechung fĂŒr ihre AnkĂŒndigung, sich dieser Idee anschließen zu wollen. Sie beschreibt zwar mit der „Aktualisierung“ ein Gegenmodell, kommt aber zu dem Schluss, dass solche Eingriffe in das Einwilligungssystem keine Vorteile mit sich bringen und schließt mit Empfehlungen an die Praxis. N2 - The article emphasizes the meaning of patient consent to medical treatment and contrasts the so-called “invalidation” of given consent with the structure of consent law. It criticizes relevant case law for announcing its intention to follow this idea and describes a counter-model in the form of “updating” and concludes that such interventions are not likely to bring any advantages. The article concludes with recommendations for practitioners. KW - Arzthaftung KW - Patienteneinwilligung KW - Consent KW - Richterrecht KW - Deutschland KW - Arzthaftung KW - Einwilligung KW - Patient KW - Richterrecht Y1 - 2022 U6 - https://doi.org/10.26127/BTUOpen-6935 ER - TY - JOUR T1 - Amtliches Mitteilungsblatt der BTU Cottbus–Senftenberg, 2025,03 (03.02.2025) N2 - Fachspezifische PrĂŒfungs- und Studienordnung fĂŒr den Bachelor-Studiengang Life Science and International Health (B. Sc.) vom 03. Februar 2025 T3 - Amtliches Mitteilungsblatt der BTU Cottbus–Senftenberg - 2025, H. 03 Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-68319 ER - TY - RPRT A1 - Weiß, Leonard T1 - Innovationskorridor als Transformationsmotor? : Ergebnisse einer Delphi-Studie zu Impulsen, Herausforderungen und Erfolgsfaktoren im Rahmen der Entwicklung des Innovationskorridors Berlin-Lausitz T1 - Innovation corridor as a driver of transformation? : results of a Delphi study on impulses, challenges and factors for success in the context of the development of the Berlin-Lusatia innovation corridor N2 - Der Innovationskorridor Berlin-Lausitz soll Akteur:innen aus Wirtschaft, Wissenschaft, Politik und Verwaltung vernetzen, Standortfaktoren verknĂŒpfen und Konkurrenzen abbauen. Beispielhaft dafĂŒr ist der Lausitz Science Park, der als Gegenpol zum Wissenschafts- und Technologiepark Adlershof entwickelt wird, und mit der Schaffung von wohnortnahen Coworking-Spaces in den abseits der Zentren gelegenen, lĂ€ndlich geprĂ€gten Regionen mit guter Bahnanbindung einhergeht. Damit stehen im Zuge des StrukturstĂ€rkungsprozesses der Lausitz neben harten Standortfaktoren auch verĂ€nderte AnsprĂŒche der BeschĂ€ftigten an das Arbeits- und Lebensumfeld im Blickpunkt. Der Innovationskorridor Berlin-Lausitz greift das Konzept der Entwicklungsachse auf und fĂŒgt sich in die Regionalentwicklungsstrategie des Landes Brandenburg ein, die seit 2021 die Verbindung von Wachstumskernen und lĂ€ndlicheren RĂ€umen entlang von Schienenwegen fördert. In diesem Kontext wird das Projekt seit 2022 als SchlĂŒsselvorhaben der Regionalentwicklung mit einer gemeinsamen Managementstruktur durch die Wirtschaftsregion Lausitz GmbH und die WISTA Management GmbH vorangetrieben und soll als Modell fĂŒr weitere Entwicklungsachsen im Land Brandenburg dienen. Die vorliegende Delphi-Studie untersucht die raum- und governancebezogenen Perspektiven auf das Vorhaben Innovationskorridor Berlin-Lausitz, mit besonderem Fokus auf VerstĂ€ndnisse, erwartete Wirkungen, Herausforderungen und Entwicklungspfade. Dabei zeigt sich ein breites Spektrum an Erwartungen: Neben einer Netzwerkwirkung wird die koordinierte Verbesserung von Standortfaktoren mit dem Projekt verbunden. Der Erfolg der Achsenidee wird bereits langfristig im Rahmen des Strukturwandelprozesses bemessen und steht vor der Herausforderung, die Zusammenarbeit einer Vielzahl von Akteur:innen mit unterschiedlichen Interessen zu koordinieren. N2 - The Berlin-Lusatia innovation corridor aims to connect stakeholders from economy, science, politics and administration, link location factors and reduce competition. An example of this is the Lusatia Science Park, which is being developed as a counterpart to the Technology Park Berlin Adlershof and is accompanied by the creation of coworking spaces close to residential areas in rural regions outside the centres that are well connected by rail. As part of the structural development process in Lusatia, the focus is therefore not only on hard location factors but also on the changing demands of employees with regard to their working and living environment. The Berlin-Lusatia innovation corridor takes up the concept of the development axis and fits into the regional development strategy of the state of Brandenburg, which has been promoting the connection of growth centres and more rural areas along rail routes since 2021. In this context, the project has been promoted since 2022 as a key regional development project with a joint management structure by Wirtschaftsregion Lausitz GmbH and WISTA Management GmbH and is intended to serve as a model for other development axes in the state of Brandenburg. This Delphi study analyses the spatial and governance-related perspectives, with a particular focus on perceptions, expected effects, challenges and development paths. This reveals a broad spectrum of expectations: In addition to a network effect, the coordinated improvement of location factors is associated with the project. The success of the axis idea is already being measured in the long term as part of the structural change process and faces the challenge of coordinating the collaboration of a large number of stakeholders with different interests. T3 - Transform - 05/2025 KW - Entwicklungsachse KW - Innovationskorridor Berlin-Lausitz KW - Stadt-Umland-Beziehungen KW - Regionalentwicklung KW - Strukturwandel KW - Development axis KW - Berlin-Lusatia innovation corridor KW - Urban-rural relations KW - Structural change KW - Berlin KW - Lausitz KW - Regionalentwicklung KW - Entwicklungsachse KW - Strukturwandel KW - Delphi-Technik KW - Regional development Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-69302 SN - 2941-7406 ER - TY - RPRT A1 - Roewer, Anja A1 - Große-Halbuer, Katharina T1 - In der PĂ€diatrie ankommen : Pflegefachpersonen bei der Einarbeitung in pĂ€diatrische Handlungsfelder unterstĂŒtzen ; eine Handreichung fĂŒr Praxiseinrichtungen und Pflegefachpersonen T1 - Arriving in pediatrics : supporting nurses in their induction into pediatric fields of practice ; a handout for practice facilities and nurses N2 - Pflegerische Situationen in pĂ€diatrischen Handlungsfeldern sind vielfĂ€ltig und anspruchsvoll. Bereits jetzt und in Zukunft besteht ein hoher Bedarf an qualifizierten Pflegefachpersonen in allen pĂ€diatrischen Versorgungsbereichen. Generalistisch ausgebildete Pflegefachpersonen erlangen mit der Pflegeausbildung einen Berufsabschluss mit grundlegenden Kompetenzen fĂŒr die pflegerische Versorgung von Menschen aller Altersstufen. Dennoch benötigen auch Pflegefachpersonen in dem Versorgungsbereich, in den sie einmĂŒnden, eine gute Einarbeitung, um spezifischen Anforderungen gerecht werden zu können. Diese Handreichung stellt eine konkrete Hilfe fĂŒr die Einarbeitung von Pflegefachpersonen und ihren Mentor*innen in ausgewĂ€hlten pĂ€diatrischen Handlungsfeldern dar. Ziel dieser Handreichung ist es, die AttraktivitĂ€t der pĂ€diatrischen Handlungsfelder fĂŒr Pflegefachpersonen aufzuzeigen und das „Ankommen“ von Pflegefachpersonen in pĂ€diatrischen Handlungsfeldern zu unterstĂŒtzen. N2 - Nursing situations in pediatric fields of activity are diverse and demanding. There is already a high demand for qualified nurses in all areas of pediatric care and they will continue to be in the future. With their nursing training, generalist nurses acquire a professional qualification with basic skills for caring for people of all ages. Nevertheless, nurses in the area of care they enter also need good induction training to meet specific requirements. This handout provides concrete assistance for the induction of nurses and their mentors in selected pediatric fields of activity. This handout aims to demonstrate the attractiveness of pediatric fields of activity for nurses and to support the “arrival” of nurses in pediatric fields of activity. KW - Einarbeitung KW - PĂ€diatrie KW - Pflege KW - Mentor KW - Pflegefachpersonen KW - Nurse KW - Onboarding KW - Pediatric KW - Brandenburg KW - Pflegepersonal KW - Lernfeld KW - PĂ€diatrie Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-69000 ER - TY - JOUR T1 - Amtliches Mitteilungsblatt der BTU Cottbus–Senftenberg, 2025,02 (29.01.2025) N2 - Fachspezifische PrĂŒfungs- und Studienordnung fĂŒr den Master-Studiengang Control of Renewable Energy Systems vom 22. Januar 2025 T3 - Amtliches Mitteilungsblatt der BTU Cottbus–Senftenberg - 2025, H. 02 Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-68304 ER - TY - JOUR T1 - Amtliches Mitteilungsblatt der BTU Cottbus–Senftenberg, 2025,01 (29.01.2025) N2 - Fachspezifische PrĂŒfungs- und Studienordnung fĂŒr den Master-Studiengang Chemistry: Materials, Engineering and Sustainability vom 22. Januar 2025 T3 - Amtliches Mitteilungsblatt der BTU Cottbus–Senftenberg - 2025, H. 01 Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-68298 ER - TY - THES A1 - HĂŒckstaedt, Tobias T1 - Einfluss von BorsĂ€ure auf die chemisch-physikalischen StrukturĂ€nderungen wĂ€hrend der Herstellung Cellulose-basierter Carbonfasern T1 - Effect of boric acid on the chemical-physical structural changes during the production of cellulose-based carbon fibers N2 - Dank der herausragenden spezifischen Festigkeit und Steifigkeit von Carbonfasern ermöglicht ihr Einsatz im Leichtbau eine signifikante Gewichtsreduktion von Verbundwerkstoffbauteilen. FĂŒr diese Anwendungen werden nahezu ausschließlich Carbonfasern auf Basis von erdölbasierten Polyacrylnitril (PAN) verwendet. Alternative biogene PrĂ€kursorsysteme, wie beispielsweise Cellulose, gewinnen aufgrund ihres Potenzials zur CO2-Reduktion und ökonomischer Vorteile zunehmend an Interesse. Derzeit wird ihr Einsatz durch eine geringere Ausbeute bei der Herstellung und niedrigere mechanische Kennwerte eingeschrĂ€nkt, was weitere Forschungsarbeiten, u. a. im Bereich der eingesetzten Prozesshilfsmittel, erforderlich macht. In der vorliegenden Arbeit wird die Auswirkung des Einsatzes von BorsĂ€ure als Additiv bei der Herstellung Cellulose-basierter Carbonfasern beleuchtet. Es wird die Hypothese verfolgt, dass BorsĂ€ure sich nicht nur positiv auf die Ausbeute bei der thermo-mechanischen Umwandlung, sondern auch auf die finale Struktur der Carbonfaser auswirkt. Aus zwei PrĂ€kursoren, einer mit BorsĂ€ure beladen und einer unmodifiziert als Referenz, werden unter Variation der Konvertierungsparameter in einem kontinuierlichen Prozess Carbonfasern hergestellt. Die chemische Umwandlung der Carbonfasern wird systematisch mittels Elementaranalyse (CHNS, ICP-OES, REM-EDX) und thermischer Analytik (DSC, TGA-MS, In-situ WAXS) untersucht und die physikalischen StrukturĂ€nderungen mit verschiedensten WAXS-Techniken verfolgt. Auch makroskopische Eigenschaften wie Dichte, spezifische elektrische LeitfĂ€higkeit und mechanische Kennwerte werden bestimmt und ĂŒber verschiedene Modelle mit strukturellen Parametern korreliert. Bereits die thermischen Analysen zeigen eine starke Wechselwirkung zwischen BorsĂ€ure und dem Cellulose-basierten PrĂ€kursor auf. Im Vergleich zum unbehandelten Referenzsystem findet der Masseverlust bei geringen Temperaturen statt und die Ausbeute erhöht sich erheblich. Es wird gezeigt, dass BorsĂ€ureprodukte auch nach einer Temperaturbehandlung bei 2000 °C in den Carbonfasern verbleiben und bereits ab 1200 °C die Ausbildung einer kristallinen Kohlenstoffphase beschleunigen. Durch Anpassung der ProzessfĂŒhrung auf die Wirkungsweise des Additivs werden Cellulose-basierte Carbonfasern mit ElastizitĂ€tsmoduli auf dem Niveau von kommerziellen PAN-basierten Carbonfasern (230 GPa) mit stark erhöhter LeitfĂ€higkeit hergestellt. Die makroskopischen und strukturellen Änderungen werden ganzheitlich unter EinfĂŒhrung der mikroskopischen Moduli im Rahmen des uniform stress Modells erklĂ€rt und als Ursache eine Reduktion von kovalenten Quervernetzungen der Basalebenen identifiziert. Als Folge wird das Kristallitwachstum weniger stark behindert und die Orientierbarkeit der kristallinen Phase wĂ€hrend der Carbonisierung bei 2000 °C signifikant erhöht. N2 - Due to their outstanding specific strength and stiffness enable carbon fibers significant weight reduction in lightweight construction of composite components. For these applications, almost exclusively carbon fibers based on polyacrylonitrile are used. Alternative, biogenic precursor systems, such as cellulose, are gaining increasing interest due to their potential for CO2 reduction and possible economic advantages. Currently, their application is limited by lower yields in production and reduced mechanical properties, necessitating further research, including in the field of additives. In the present work, the effect of boric acid as an additive in the production of cellulose-based carbon fibers is examined. The hypothesis is that boric acid positively influences both the yield during conversion and the final structure of the carbon fiber. Two precursors, one loaded with boric acid and one unmodified as a reference, are used to produce carbon fibers in a continuous process while varying the conversion parameters. The chemical conversion of the carbon fibers is systematically analyzed using elemental analysis (CHNS, ICP-OES, SEM-EDX) and thermal analysis (DSC, TGA-MS, in-situ WAXS) and the physical structural changes are tracked using various WAXS techniques. Macroscopic properties such as density, specific electrical conductivity, and mechanical properties are also determined and correlated with structural parameters using different models. The thermal analyses already show a strong interaction between boric acid and the cellulose-based precursor. Compared to the untreated reference system, the mass loss occurs at lower temperatures and the yield increases drastically. It is demonstrated that boric acid products remain in the carbon fibers even after heat treatment at 2000 °C and that they accelerate the formation of crystalline structures starting at 1200 °C. By adapting the process to the mechanism of the additive, cellulose-based carbon fibers with elastic moduli at the level of commercial standard-modulus carbon fibers (230 GPa) and significantly increased conductivity are produced. The macroscopic and structural changes are comprehensively explained by introducing the microscopic moduli within a uniform stress model. The shear modulus of the basal planes normal to the c-axis, a direct measure of the density of covalent cross-links, decreases by 40% due to the use of boric acid. As a result, crystallite growth is less hindered and the orientability of the crystalline phase during conversion at 2000 °C is tripled. KW - Carbonfasern KW - Cellulose KW - Nachwachsende Rohstoffe KW - BorsĂ€ure KW - Carbonisierung KW - Carbon fibers KW - Cellulose KW - Renewable resources KW - Boric acid KW - Carbonization KW - Kohlenstofffaser KW - Cellulose KW - BorsĂ€ure KW - Festigkeit KW - Leichtbau KW - Nachwachsender Rohstoff Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-69083 ER - TY - THES A1 - Knorr, Alexander Georg T1 - Contextual influences on oculomotor reflexes: an internal-model perspective T1 - Kontextuelle EinflĂŒsse auf okulomotorische Reflexe als internes Modell der Welt N2 - Gaze-stablizing eye movements, such as the visual-motion-driven optokinetic reflex (OKR) serve to maintain stable eye orientation during active or passive self-motion and thereby stabilize the retinal image. Therefore, they require an explicit or implicit internal estimate of an organism's relative motion with respect to its surroundings. This thesis examines the hypothesis that contextual cues from the visual scene (such as contrast intensity, polarity and color) influence the OKR in Xenopus tadpoles. The studies reported herein found that these contextual clues have a distinct influence on gaze stabilization performance. This gives rise to the interpretation that Xenopus tadpoles exploit information contained in the spatial properties of the moving visual scene to form an internal self-motion estimate and distinguish self-motion through the environment from moving external objects. Finally, I will argue that the observed context-specific performance differences can be interpreted as an implementation of an internal model of the world. N2 - Blickstabilisierende Augenbewegungen wie der durch visuelle Bewegung ausgelöste optokinetische Reflex (OKR) dienen der Aufrechterhaltung einer stabilen Augenausrichtung bei aktiver oder passiver Eigenbewegung und damit der Stabilisierung des Netzhautbildes. Sie erfordern daher eine explizite oder implizite interne EinschĂ€tzung der relativen Bewegung eines Organismus im VerhĂ€ltnis zu seiner Umgebung. In dieser Arbeit wird die Hypothese untersucht, dass kontextuelle Hinweise aus der visuellen Szene (wie KontrastintensitĂ€t, PolaritĂ€t und Farbe) den OKR bei Xenopus-Kaulquappen beeinflussen. Es wird gezeigt, dass diese kontextuellen Hinweise einen deutlichen Einfluss auf die Blickstabilisierungsleistung haben. Dies legt die Interpretation nahe, dass Xenopus-Kaulquappen die in den rĂ€umlichen Bildeigenschaften der sich bewegenden visuellen Szene enthaltenen Informationen nutzen, um eine interne EinschĂ€tzung der Eigenbewegung vorzunehmen und die Eigenbewegung von der Bewegung externer Objekte in der Umweld zu unterscheiden. Schließlich werde ich argumentieren, dass die beobachteten kontextspezifischen Leistungsunterschiede als Implementierung eines internen Modells der Welt interpretiert werden können. KW - Optokinetic KW - Xenopus KW - Motion Perception KW - Vision KW - Sensomotorics KW - Augenbewegungen KW - Bewegungswahrnehmung KW - Sehsinn KW - Sensomotorik KW - Augenbewegung KW - Bewegungswahrnehmung KW - Krallenfrosch KW - Netzhautbild KW - Physiologische Optik KW - Sensomotorik KW - Xenopus KW - Motor perception KW - Physiological optics KW - Vision Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-68767 ER - TY - THES A1 - Lorenz-Meyer, Maximilian Nicolai Lorenz T1 - State and parameter estimation approaches for online dynamic security assessment in power systems T1 - Verfahren zur Zustands- und ParameterschĂ€tzung fĂŒr die dynamische Sicherheitsbewertung von Stromnetzen in Echtzeit N2 - With the global effort to decarbonize the energy sector, major changes are being implemented in power systems. This shift drastically alters the system dynamics, prompting the need for innovative online dynamic security assessment (DSA) tools. Such tools are crucial for system operators to gain situational awareness and make corrective or preventive operational decisions, ensuring reliable, secure, and cost-efficient system operation. A key component of online DSA tools is power system dynamic state estimation (DSE), used to obtain real-time estimates of critical system states and parameters, such as the inertia constant or the states and parameters of synchronous generators. Motivated by this, control theory-based approaches for DSE that focus on two key challenges are developed in the present thesis. Firstly, the topic of multi-area inertia estimation is addressed. Secondly, the problem of decentralized state and parameter estimation for synchronous generators is considered. Unlike much of the existing literature on the topic, rigorous analytical convergence guarantees are provided. More specifically, the main contributions of this work are as follows: 1) A robust tuning method for consensus + innovations-based distributed parameter estimation in the presence of disturbances is derived. This technique allows for systematic gain tuning, while providing guaranteed robustness properties and avoiding trial-and-error gain selection. As disturbances, such as measurement noise, perturbations in the communication channels, and model mismatches, arise in any real-world application, the tuning procedure can be utilized for various distributed estimation problems in the context of DSE and other fields. 2) The method presented under Item 1 is employed to develop a robust distributed inertia estimation approach for interconnected power systems. Differing from similar approaches, the proposed scheme requires only peer-to-peer communication of local parameter estimates between neighboring control areas, avoiding the need for a central entity with access to global measurement information. The performance of the approach is validated by simulations. 3) A decentralized unknown input scheme for reconstructing the states of synchronous generators in a multi-machine power system along with critical machine parameters is proposed. Only phasor measurements from a substation near a power plant are required for this. Such a location is more accessible to system operators than the generator's terminal bus, which is the usual measurement location assumed in the literature. Lastly, the performance is validated in a simulation study and using real-world measurement data from the German high-voltage grid. N2 - Die weltweiten Bestrebungen zur Dekarbonisierung des Energiesektors fĂŒhren zu weitreichenden VerĂ€nderungen in elektrischen Energienetzen. Dies verĂ€ndert die Systemdynamik drastisch und erfordert innovative Echtzeitstrategien zur dynamischen Sicherheitsbewertung (DSB). Solche Verfahren sind fĂŒr Netzbetreiber entscheidend, um den aktuellen Systemzustand zu bewerten und korrigierende oder prĂ€ventive Betriebsentscheidungen zu treffen, die einen zuverlĂ€ssigen, sicheren und kosteneffizienten Systembetrieb gewĂ€hrleisten. Eine SchlĂŒsselkomponente der Strategien zur DSB ist die dynamische ZustandsschĂ€tzung (DZS), die dazu dient, in Echtzeit kritische SystemzustĂ€nde und -parameter wie z. B. die TrĂ€gheitskonstante oder die ZustĂ€nde und Parameter von Synchrongeneratoren zu schĂ€tzen. Vor diesem Hintergrund werden in der vorliegenden Arbeit regelungstheoretische AnsĂ€tze fĂŒr die DZS entwickelt, die sich auf zwei zentrale Herausforderungen konzentrieren. Erstens wird das Thema der TrĂ€gheitsschĂ€tzung in elektrischen Verbundnetzen behandelt. Zweitens wird das Problem der dezentralen Zustands- und ParameterschĂ€tzung fĂŒr Synchrongeneratoren betrachtet. Im Gegensatz zu einem Großteil der bestehenden Literatur werden analytische Konvergenzgarantien angegeben. Im Einzelnen sind die wichtigsten BeitrĂ€ge dieser Arbeit die folgenden: 1) Es wird ein Entwurfsverfahren zur robusten verteilten Consensus + Innovations-basierten ParameterschĂ€tzung bei Vorliegen von Unsicherheiten entwickelt. Damit können die VerstĂ€rkungsfaktoren bei garantierter Robustheit systematisch ausgelegt werden und eine Bestimmung durch Trial-and-Error wird vermieden. Da Unsicherheiten wie Messrauschen, Kommunikationsstörungen und Modellunsicherheiten in jeder realen Anwendung auftreten, kann das Verfahren fĂŒr diverse verteilte SchĂ€tzprobleme im Kontext von DZS und anderen Bereichen verwendet werden. 2) Die unter Punkt 1 vorgestellte Methode wird zur Entwicklung eines robusten verteilten Ansatzes zur TrĂ€gheitsschĂ€tzung in elektrischen Verbundnetzen eingesetzt. Im Gegensatz zu Ă€hnlichen Verfahren erfordert dieser Algorithmus lediglich eine Peer-to-Peer-Kommunikation der lokalen ParameterschĂ€tzungen zwischen benachbarten Regelzonen, sodass keine zentrale Instanz mit Zugang zu globalen Messinformationen erforderlich ist. Die Performanz des Ansatzes wird durch Simulationen validiert. 3) Es wird ein dezentrales Verfahren zur SchĂ€tzung der ZustĂ€nde sowie kritischer Parameter von Synchrongeneratoren mit unbekannten EingangsgrĂ¶ĂŸen hergeleitet. Dazu werden nur Messdaten eines zeitsynchronisierten ZeigermessgerĂ€ts benötigt, das in einem Umspannwerk in der NĂ€he eines Kraftwerks angeschlossen ist. Ein solcher Standort ist fĂŒr Netzbetreiber leichter zugĂ€nglich als der Generatorausgang, welcher in der Literatur ĂŒblicherweise als Messort angenommen wird. Abschließend wird die Performanz des Verfahrens in einer Simulationsstudie und anhand realer Messdaten aus dem deutschen Hochspannungsnetz demonstriert. KW - Online dynamic security assessment KW - Power grid monitoring KW - Dynamic state and parameter estimation KW - Robust distributed estimation KW - Dynamische Sicherheitsbewertung KW - StromnetzĂŒberwachung KW - Dynamische Zustands- und ParameterschĂ€tzung KW - Robuste verteilte SchĂ€tzung KW - Regelungstheorie KW - Verbundnetz KW - Sicherheit KW - Bewertung KW - Synchrongenerator KW - ParameterschĂ€tzung Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-69114 ER - TY - JOUR A1 - Afitiri, Abdul-Rahaman A1 - Afrifa, Ernest Kofi Amankwa T1 - Households’ willingness to use water from a solar water disinfection treatment system for household purposes JF - World N2 - The consumption of contaminated water contributes to the global burden of diarrhea and other water-borne diseases, especially among young children. While decentralized solar water disinfection treatment systems (hereafter SODIS) remain a viable option to have safe drinking water, our understanding of the effects of household water treatment before use on willingness to accept and adopt a SODIS is limited. In this study, a complementary log-log regression analysis of the compositional and contextual factors that systematically vary with willingness to accept and adopt a SODIS in the Sawla-Tuna-Kalba (STK) district of Ghana was carried out. Based on our findings, a greater proportion of households (97%) are willing to accept and adopt a SODIS. Compositional and contextual factors such as age, marital status, education, religion, and geographical location significantly contribute to households’ willingness to accept and adopt a SODIS in the STK district of Ghana. Households that treat their water before use (66%, p < 0.05) are more likely to accept and adopt a SODIS compared to those that do not treat their water before use. The findings, therefore, suggest that scaling up SODIS in the STK district is sacrosanct and highlight the necessity to analyse compositional and contextual factors influencing willingness to accept and adopt SODIS. Our findings will inform policies and programs aimed at implementing SODIS in the study area to improve the health of communities that rely on poor-quality drinking water sources. KW - SODIS KW - Disinfection KW - Willingness to accept KW - Adoption KW - Sawla-Tuna-Kalba district Y1 - 2024 U6 - https://doi.org/10.3390/world5040060 SN - 2673-4060 VL - 5 IS - 4 SP - 1181 EP - 1193 PB - MDPI CY - Basel ER - TY - JOUR A1 - Ertugrul, Gökhan A1 - Emdadi, Aliakbar A1 - Jedynak, Angelika A1 - Weiß, Sabine A1 - HĂ€rtel, Sebastian T1 - Hot forming behavior of tungsten carbide reinforced Ni-based superalloy 625 additively manufactured by laser directed energy deposition JF - Additive Manufacturing Letters N2 - The demands of high-performance industries such as aerospace, automotive, tool manufacturing, oil, and gas industries are driving the innovation in high-performance materials and their production methods. This study explores the impact of hybrid manufacturing, specifically the effect of the addition of tungsten carbide (WC/W2C) via Laser-Directed Energy Deposition (L-DED), on the hot workability, hardness, and microstructure of nickel-based superalloy Inconel 625 (IN625). IN625 is known for its high temperature and high corrosion resistance, and tungsten carbide for its high wear resistance and grain refinement effect. The integration of WC/W2C particles into the IN625 matrix, in addition to the use of the hybrid approach of additive manufacturing followed by a hot–forming process, significantly influences the microstructure and mechanical behavior of the material. Thus, while incorporation of the WC/W2C can strengthen the material and extend the mechanical limitations, its full impact, including any potential usages, should be thoroughly evaluated for the intended application of the materials. To understand the effect of WC/W2C, additive manufacturing of IN625 both with and without WC/W2C and isothermal hot compression was carried out. The objective is to analyze the differences in microstructure and properties between L-DED manufactured IN625, and WC-reinforced IN625, and their hot-forming behavior, focusing on the effects of WC addition and post-deformation on microstructure and mechanical properties. This work represents the first investigation into the effect of WC/W2C hard particles on the hot-forming process of additively manufactured Ni-based metal matrix composites. KW - Hybrid manufacturing KW - Laser-directed energy deposition (L-DED) KW - Hot-forming KW - Inconel 625 (In625) KW - Microstructure manipulation Y1 - 2025 U6 - https://doi.org/10.1016/j.addlet.2025.100267 SN - 2772-3690 VL - 13 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Konda, Karunakar Reddy A1 - Franzki, Jonas A1 - Sharma, Dikshant A1 - König, Paul A1 - Mathiazhagan, Akilan A1 - Henke, Markus A1 - Höschler, Klaus T1 - Quantitative assessment of cooling methods for electrical machines in aircraft drives JF - IEEE Access N2 - Transformation of the aviation sector towards climate-neutral solutions such as electrification is urgent. Aviation electrification requires reasoned selection of suitable technologies which has to meet strict requirements and standards. Cooling of electrical components plays a vital role in the sizing and overall performance of the electrical drive system and must achieve high effectiveness and reliability at low weight. Three cooling methods – air cooling, direct slot cooling and cooling jacket – are sized for a 300 kW commuter aircraft (CS23) all-electric propulsion system. They are further evaluated quantitatively for weight, drag, reliability and effectiveness in a conservative assessment. A lumped parameter thermal network (LPTN) approach is utilized to assess and evaluate the thermal performance of the cooling systems. The LPTN model served as the basis to determine the temperature limits and capabilities of the cooling system which are then utilized to size the auxiliary components. Reliability is assessed via fault tree analysis, drag via scoop inlet characteristics and effectiveness via the heat load dissipated per weight of the system and the required cooling power per mechanical power. Cooling jacket achieves the highest effectiveness closely followed by slot cooling. Air cooling proves to be most reliable and lightest. KW - Cooling systems KW - Electric aircrafts KW - Motor drives KW - Sizing KW - Thermal management Y1 - 2024 U6 - https://doi.org/10.1109/ACCESS.2024.3517319 SN - 2169-3536 VL - 12 SP - 192768 EP - 192785 PB - IEEE CY - New York ER - TY - RPRT A1 - Schmidt, Verena A1 - Koch, Pola A1 - Felber, Diana T1 - Barcelona Les Tres Xemeneies : Perspektiven fĂŒr die Transformation eines ikonischen Kraftwerks T1 - Barcelona Les Tres Xemeneies : perspectives for the transformation of an iconic power plant N2 - Das Fachgebiet StĂ€dtebau und Entwerfen der Brandenburgischen Technischen UniversitĂ€t Cottbus-Senftenberg widmet sich im Entwurfsstudio Barcelona – Les Tres Xemeneies den Zukunftsperspektiven fĂŒr das ehemalige Kraftwerk Sant AdriĂ  de BesĂČs. Das denkmalgeschĂŒtzte GebĂ€ude mit seinen ikonischen, 200 Meter hohen Schornsteinen wurde anlĂ€sslich der Manifesta 15 im Herbst 2024 fĂŒr die Öffentlichkeit zugĂ€nglich gemacht. Diese temporĂ€re Aktivierung bildet den Ausgangspunkt fĂŒr eine langfristige Transformation des Areals. Die studentischen EntwĂŒrfe prĂ€sentieren Konzepte fĂŒr die stĂ€dtebauliche Entwicklung des Gebiets: Einerseits werden VorschlĂ€ge fĂŒr den Umbau und die Nachnutzung des ehemaligen Kraftwerks entwickelt, andererseits werden Lösungen fĂŒr ein gemischt genutztes Quartier aufgezeigt, das aktuelle Herausforderungen wie die Wohnungsfrage, die Klimaanpassung und das VerhĂ€ltnis zwischen Stadt und Meer adressiert. N2 - The Chair of Urban Design at Brandenburg University of Technology Cottbus-Senftenberg is exploring future perspectives for the former Sant AdriĂ  de BesĂČs power plant in the design studio Barcelona – Les Tres Xemeneies. The listed building, with its iconic 200-meter-high three chimneys, was made accessible to the public during Manifesta 15 in the fall of 2024. This temporary activation serves as a starting point for a long-term transformation of the site. The student projects present concepts for the urban development of the area: on the one hand, proposals for the renovation and repurposing of the former power plant are being developed; on the other hand, solutions for a mixed-use neighbourhood are being proposed, addressing current challenges such as the housing issue, climate adaptation, and the relationship between city and sea. T3 - Transform - 04/2024 KW - Urbane Transformation KW - Barcelona KW - Stadtentwicklung KW - Wohnungsbau KW - Wohnungsgenossenschaft KW - Sozialer Wohnungsbau KW - StĂ€dtebaulicher Entwurf KW - Wohnungstypologien KW - Umbaukultur KW - Bauen am Wasser KW - Urban transformation KW - Urban design KW - Housing typologies KW - Culture of repair KW - Waterfront construction Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-69073 SN - 2941-7406 ER - TY - RPRT A1 - Schmidt, Verena A1 - Opel, Nicole A1 - Felber, Diana T1 - Learning from Barcelona : auf den Spuren sozialer Wohnformen im Kontext der Stadtentwicklung T1 - Learning from Barcelona : tracing social housing forms in the context of urban development N2 - Barcelona ist derzeit eine der spannendsten Referenzen fĂŒr eine sozialvertrĂ€gliche und nachhaltige Stadtentwicklungs- und Wohnungsbaupolitik. Diese erfĂ€hrt international viel Aufmerksamkeit und gilt angesichts der brennenden Frage nach innerstĂ€dtischem, bezahlbarem Wohnraum in aktuellen Fachdiskursen als beispielhaft und auf viele andere Orte ĂŒbertragbar. Dieses hochaktuelle Thema hat das Fachgebiet StĂ€dtebau und Entwerfen an der Brandenburgischen Technischen UniversitĂ€t Cottbus-Senftenberg anlĂ€sslich der Biennale Manifesta 15 Barcelona Metropolitana mit dem Seminar und der Exkursion Learning from Barcelona aufgegriffen. Masterstudierende der Fachrichtungen Stadt- und Regionalplanung sowie Architektur setzten sich mit vier wichtigen Phasen der Stadtentwicklung in Barcelona auseinander und erarbeiteten zeichnerische und textliche Analysen ausgewĂ€hlter Wohnungsbauprojekte, die in diesen Zeiten entstanden sind. Ein Schwerpunkt lag dabei auf den Jahren seit 2010 und den aktuell fertiggestellten oder derzeit im Bau befindlichen genossenschaftlichen und sozialen Wohnprojekten. N2 - Barcelona is currently one of the most prominent examples of socially responsible and sustainable urban development and housing policies. It has gained international attention and is widely regarded as a model in current professional discourses, particularly in relation to the pressing issue of affordable inner-city housing. Its approach is seen as transferable to many other cities. This highly relevant topic has been addressed by the Chair of Urban Design at Brandenburg University of Technology Cottbus-Senftenberg in conjunction with the Manifesta 15 Barcelona Metropolitana Biennial through the seminar and excursion Learning from Barcelona. Master‘s students from the fields of urban and regional planning, as well as architecture, analyzed four key phases of urban development in the city. They produced both graphical and textual analyses of selected housing projects developed during these periods. Particular emphasis was placed on the years since 2010, focusing on cooperative and social housing projects that have been completed or are currently under construction. T3 - Transform - 03/2024 KW - Genossenschaftlicher Wohnungsbau KW - Barcelona KW - Stadtentwicklung KW - Wohnungsbau KW - Wohnungsgenossenschaft KW - Sozialer Wohnungsbau KW - Sozialer Wohnungsbau KW - Stadtentwicklung KW - Wohntypologien KW - Wohnungspolitik KW - Housing typologies KW - Social housing KW - Cooperative housing KW - Housing policy KW - Urban development Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-69065 SN - 2941-7406 ER -