@phdthesis{Haeberle2016, author = {Haeberle, J{\"o}rg}, title = {Transparente leitf{\"a}hige Metalloxideinkristalle und amorphe oxidische D{\"u}nnschichtsysteme - Eine photoelektronenspektroskopische Vergleichsstudie}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus4-40356}, school = {BTU Cottbus - Senftenberg}, year = {2016}, abstract = {Die Materialklasse der transparenten leitenden Metalloxide (engl. transparent conducting oxides (TCO)) und amorphen oxidischen D{\"u}nnschichtsysteme (engl. amorphous oxidic semiconductors (AOS)) sind {\"u}beraus faszinierend, da sie gegens{\"a}tzliche physikalische Eigenschaften, wie Transparenz und hohe Leitf{\"a}higkeit in sich vereinen. Die zugrunde liegenden physikalischen Mechanismen sind immer noch unklar und werden in dieser Dissertation beleuchtet. Dazu wurde die resonante Photoelektronenspektroskopie (resPES)gew{\"a}hlt, da sie sich in den letzten Jahren als vielseitiges Werkzeug f{\"u}r die detaillierte Untersuchung der elektronischen Struktur und der Identifikation von Defekten ausgezeichnet hat. Im Rahmen dieser Arbeit ergab sie die einmalige M{\"o}glichkeit, sowohl hoch qualitative TCO-Einkristalle (ZnO, Ga2O3, In2O3 und SnO2) als auch amorphe oxidische D{\"u}nnschichtsysteme (GIZO und SnOx) photeelektronenspektroskopisch zu untersuchen und zu vergleichen. Somit wird gezeigt, dass die elektronische Struktur der Materialklasse der TCO und ihrer korrespondierenden AOS mehr Gemeinsamkeiten aufweisen, als bisher erwartet wurde. Es zeigt sich, dass die Bandl{\"u}cke, im eigentlichen Sinne, in der Materialklasse der TCO und AOS nicht existiert. Lokalisierte Zust{\"a}nde f{\"u}llen den gesamten Bereich dieser Bandl{\"u}cke aus und reichen zum Teil in das Valenzband (VB) und Leitungsband (CB) hinein. Dies f{\"u}hrt dazu, dass es keine, wie bisher gedacht, scharfen Grenzen zwischen lokalisierten und delokalisierten Zust{\"a}nden gibt. Um dies zu verdeutlichen wird ein neuartiges Modell eingef{\"u}hrt, das aufzeigt, dass die Wechselwirkung von metallischen d- und s-Niveaus in einer {\"O}ffnung der d-Schale resultiert. Durch Charge-Transfer (CT)-Mechanismen und weitere Hybridisierung mit metallischen unbesetzten p-Zust{\"a}nden folgt eine st{\"a}rkere Lokalisierung. Die Diskussion wird begonnen mit der Kl{\"a}rung der Elementeverh{\"a}ltnisse der untersuchten Materialsysteme. Darauf folgt die Charakterisierung von intrinsischen Defekten und ihren Beitr{\"a}gen auf die elektronische Struktur. Abschließend werden die elektronischen Strukturen der AOS mit denen der korrespondierenden TCO verglichen.}, subject = {Metalloxide; D{\"u}nnschichtsysteme; ResPES; Experimentelle partielle Zustandsdichte; Intrinsische Bandl{\"u}ckenzust{\"a}nde; TCO; AOS; ResPES; Experimental pDOS; Intrinsic gap states; Metalloxide; Photoelektronenspektroskopie; Elektronenstruktur; Zustandsdichte; Energiel{\"u}cke}, language = {de} } @phdthesis{Niese2014, author = {Niese, Sven}, title = {Lab-based in-situ X-ray microscopy - methodical developments and applications in materials science and microelectronics}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus4-35665}, school = {BTU Cottbus - Senftenberg}, year = {2014}, abstract = {The method of microscopic imaging using X-rays and diffractive lenses was developed at synchrotron radiation facilities and it was recently transferred to systems with laboratory X-ray sources. The first part of this thesis focuses on instrumentation, in particular on the fabrication, characterization, and application of multilayer Laue lenses (MLL). The second part describes a micromechanical in-situ test that is used to study crack propagation with X-ray microscopy in microchips in a dedicated fracture mechanics experiment called micro double cantilever beam test (MicroDCB). MLLs were fabricated from WSi2/Si multilayer coatings using mechanical preparation and focused ion beam milling. Initial characterization of the obtained lenses using scanning electron microscopy and X-ray microscopy was used to evaluate the quality of the multilayer stack and particularly to identify geometrical imperfections of individual lens elements. Crossed partial MLLs were assembled as a compact lens device for two-dimensional operation, i.e. point focusing of synchrotron radiation or full-field transmission imaging. The optical properties were simulated using a geometrical optics approximation and a physical optics model. Experimental results verify full-field imaging using crossed partial MLLs with a focal length of 8.0 mm for Cu-Ka radiation in a laboratory X-ray microscope. Sub-100 nm resolution is shown and remaining aberrations are discussed. So-called wedged MLLs employ dynamic diffraction to increase the diffraction efficiency. A fabrication process is presented that allows a subsequent geometrical modification of the lens element using a stress layer. Thus, the wedged geometry is realized independently of the multilayer coating. The resulting layer tilt is measured using a laboratory X-ray microscope. First investigations of such wedged MLLs with synchrotron radiation at a photon energy E=15.25 keV show an enhancement of the diffraction efficiency of 57 \% in comparison to a tilted MLL with the same dimensions. The long working distance of the X-ray microscope facilitates the integration of customized equipment to perform in-situ experiments. The MicroDCB tester was designed and built to drive a crack in an appropriately prepared specimen. It is compatible with the X-ray microscope and it allows tomographic studies under load. In particular, the method was applied to investigate crack propagation in the on-chip interconnect stack of advanced microelectronics products. Stable crack propagation at this location was achieved. Subsequent tomographies were acquired at several load steps. The reconstructed datasets show no critical distortions. This test is assumed to provide valuable information about crack propagation such heterogeneous structures, what is of interest to address reliability issues.}, subject = {X-ray microscopy; Diffractive X-ray lens; Double cantilever beam test; R{\"o}ntgenmikroskopie; Diffraktive R{\"o}ntgenlinse; R{\"o}ntgenlinse; Rissausbreitung; R{\"o}ntgenmikroskopie}, language = {en} } @phdthesis{Kutukova2023, author = {Kutukova, Kristina}, title = {In-situ study of crack propagation in patterned structures of microchips using X-ray microscopy}, doi = {10.26127/BTUOpen-6256}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus4-62567}, school = {BTU Cottbus - Senftenberg}, year = {2023}, abstract = {The motivation of this thesis was to control crack steering into regions of engineered 3D-nanopatterned structures with high fracture toughness and to determine the local critical energy release rate for crack propagation in 3D-nanopatterned systems. On-chip copper interconnect structures of advanced microchips, insulated by organosilicate glasses, were chosen as an example system to study fracture on small scale, since this is a well-defined 3D- nanopatterned system and since a high mechanical robustness is requested for microchips. An experiment for in-situ high-resolution 3D imaging of the fracture behavior of 3D-nanopatterned structures and of the kinetics of microcrack propagation in solids was designed and applied, combining a miniaturized micromechanical test and high-resolution X-ray imaging. Particularly, a miniaturized piezo-driven double cantilever beam test set-up (micro- DCB) was integrated in a laboratory X-ray microscope, and nano X-ray computed tomography was applied for high-resolution 3D imaging of the microcrack evolution in the on-chip interconnect stack of microchips manufactured in the 14 nm technology node. The measured geometry of the microcrack at several loading steps during the micro-DCB test and the subsequent data analysis based on linear elastic fracture mechanics and the Euler-Bernoulli beam model were the basis for the development and application of a new methodology to determine the critical energy release rate for crack propagation in sub- 100 nm regions of a processed wafer quantitatively. It was experimentally proven that specially designed metallic guard ring structures at the rim of the microchips dissipate energy in such a way that the microcrack propagation is efficiently slowed down and eventually stopped, i.e. they are effective to prevent mechanical damage of microchips. It was demonstrated that it is possible to steer the microcrack in a controlled way by tuning the fracture mode mixity locally at the crack tip. The established concept for a controlled crack propagation provides the basis for further fundamental studies of the fracture behavior of nanoscale materials and structures. The results have significant effects for the understanding of fracture mechanics at small scales, e.g. in microchips, but also in other nanopatterned materials, e.g. in bio-inspired, hierarchically structured engineered materials. The experimental results gathered at realistic microelectronic products provide valuable information to control the crack path in on-chip interconnect stacks for design-for-reliability in semiconductor industry and to manufacture mechanically robust microchips in leading-edge technology nodes. The experimental study of controlled microcrack steering into regions with high fracture toughness provides knowledge for the design of guard ring structures in microchips to stop the propagation of microcracks, e.g. generated during the wafer dicing process.}, subject = {R{\"o}ntgenmikroskopie; In-situ-Rissausbreitung; On-Chip-Interconnect-Stacks; Bruchmechanik; Schutzringstrukturen; X-ray microscopy; In-situ crack propagation; On-chip interconnect stacks; Fracture mechanics; Guard ring structures; Rissausbreitung; Mikroriss; Bruchverhalten; Bruchmechanik; Nanostrukturiertes Material; Chip; R{\"o}ntgenmikroskopie}, language = {en} } @phdthesis{Rouissi2017, author = {Rouissi, Zied}, title = {Role of substrates morphology and chemistry in ALD HfO₂ on Si(111)-H terminated surfaces as model}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus4-42418}, school = {BTU Cottbus - Senftenberg}, year = {2017}, abstract = {This work presents an approach to investigate fundamental aspects concerning the early stage of the atomic layer deposition (ALD) growth process on stepped surfaces. The first interaction between precursors and surface is strongly important for the ALD growth that it is still far away from the status to be completely understood. For this purpose, a few ALD-cycles withtetrakis(dimethylamido)hafnium (TDMAH) and trimethylaluminum (TMA) as metallic precursors and water (H₂O) as oxidant has been performed in order to study the initial metal oxide film growth on stepped surfaces such as silicon Si(111)-H terminated, highly oriented pyrolytic graphite (HOPG) and silver deposited HOPG (Ag-HOPG). These investigations have been carried out at various substrate temperatures, where scanning tunneling microscopy (STM) has been used systematically to probe the ALD features. This technique is delivering unique knowledge about the locality and the density of nucleation's sites on the different substrates. The data collected are then subjected to a mathematical model to understand the growth and to determine the effect of the surface morphology and chemistry on the behavior of the nucleation. The in-situ cycle-by-cycle STM investigation of 4 initial ALD cycles of TDMAH and H₂O on Si(111)-H terminated at room temperature (RT) and at 280°C displays two regimes of growth: In Regime I (1st - 2nd cycle) an increase in roughness in the first cycle to 0.2nm and 0.34nm respectively for RT and 280°C with a partial surface coverage of 71\% and 54\% is observed. In the 2nd cycle, the coverage increased to ~98\% and 94\% maintaining the same film height of the 1st cycle. A complete layer is formed in this regime. The results are discussed in reference to the Puurunen model. Following this model, the determination of the reaction mechanism in relation to the number of Hf atoms/nm² attached to the surface reveals that two ligands exchanges occur at RT and one ligand exchange at 280°C in the first regime. In addition, the origin of the reaction saturation was determined to be caused by the steric hindrance effect. In this first regime, the growth model is governed by random deposition followed by Mullins diffusion as determined from the universal values found for the roughness dynamic exponents (α, β, 1/z) of the film.}, subject = {ALD; Stepped surface; Morphology; Growth statistics; STM; Gestufte Oberfl{\"a}che; Wachstumsstatistik; Morphologie; Rastertunnelmikroskopie (RTM); Halbleiteroberfl{\"a}che; Schichtwachstum; Atomlagenabscheidung; Rastertunnelmikroskopie}, language = {en} } @phdthesis{Mueller2010, author = {M{\"u}ller, Sebastian}, title = {Synchrotron radiation spectroscopy studies of the initial interaction of Chromium and Cobalt with the surface of Titanium Dioxide}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus-18914}, school = {BTU Cottbus - Senftenberg}, year = {2010}, abstract = {In the framework of this thesis, synchrotron radiation based spectroscopy methods are applied to study the electronic structures of stoichiometric Rutile single crystals and TiO2 thin films, and the initial stage of chromium and cobalt growth on TiO2 thin films. Resonance photoemission spectroscopy of clean TiO2 at the Ti L2,3 edges led to Auger-like features, with kinetic energies corresponding to the Ti L2,3M4,5M4,5 Auger decay channels. The presence of these features is assigned to origin from a d2L2 charge transfer state. The resonance of the Ti L3M2,3V Auger channel at the Ti L2 edge is assigned to the L2L3V Coster-Kronig Auger, followed by the normal L3M2,3V Auger decay. The deposition of chromium on the TiO2 film causes a strong interaction at the interface, in which TiO(2-x) is formed together with chromium in the Cr 3+ state. Besides the oxidized component, contribution of metallic chromium is found as well. In the ultra-low coverage regime, post-deposition oxidation is observed, in which metallic chromium is oxidized to Cr2O3, accompanied by re-oxidation of the substrate to TiO2. The interface reaction is also reflected by the appearance of two defect states in the band gap. Resonant photo-emission at the Cr 2p and Ti 2p edges shows well distinguishable Cr 3d respectively Ti 3d character of the respective states. Indications for self-cleaning properties are found by removal of surface carbon during storage in UHV, but the influence of chromium on these properties is not studied in detail. The interaction between cobalt and TiO2 is weaker than that of chromium and TiO2. Nevertheless, an interface reaction is found, in which some of the deposited cobalt is oxidized, while the oxide support is partly reduced. The particular oxidation state of Cobalt is identified by means of multiplet calculation including charge transfer and crystal field effects. The calculated XAS and XPS spectra indicate Co 2+ in a tetrahedral coordination with four oxygen atoms. The metallic component of cobalt gives rise to a broad resonance in the valence band down to -20 eV, with a pronounced satellite feature that reflects the oxidized component.}, subject = {Spektroskopie; Titandioxid; Atomare Multiplett-Rechnung; Resonante Photoemission; Metall-Metalloxid-Wechselwirkung; Titanium dioxide; Metal/metal-oxide interaction; Multiplet-calculation; Resonant photoemission}, language = {en} } @phdthesis{Sohal2006, author = {Sohal, Rakesh}, title = {CVD growth of (001) and (111) 3C-SiC epilayers and their interface reactivity with praseodymium oxide dielectric layers}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus-121}, school = {BTU Cottbus - Senftenberg}, year = {2006}, abstract = {In this work, growth and characterisation of 3C-SiC thin films, investigation of oxidation of thus prepared layers and Pr-silicate and AlON based interface with SiC have been studied. Chemical vapor deposition of 3C-SiC thin films on Si(001) and Si(111) substrates has been investigated. Prior to the actual SiC growth, preparation of initial buffer layers of SiC was done. Using such a buffer layer, epitaxial growth of 3C-SiC has been achieved on Si(111) and Si(001) substrates. The temperature of 1100°C and 1150°C has been determined to be the optimal temperature for 3C-SiC growth on Si (111) and Si(001) substrates respectively. The oxidation studies on SiC revealed that a slow oxidation process at moderate temperatures in steps was useful in reducing and suppressing the g-C at the SiO2/SiC interface. Clean, graphitefree SiO2 has been successfully grown on 3C-SiC by silicon evaporation and UHV anneal. For the application of high-k Pr2O3 on silicon carbide, plausible interlayer, Pr-Silicate and AlON, have been investigated. Praseodymium silicate has been prepared successfully completely consuming the SiO2 and simultaneously suppressing the graphitic carbon formation. A comparatively more stable interlayer using AlON has been achieved. This interlayer mainly consists of stable phases of AlN along with some amount of Pr-aluminates and CN. Such layers act as a reaction barrier between Pr2O3 and SiC, and simultaneously provide higher band offsets.}, subject = {Siliciumcarbid; Kristallfl{\"a}che; Dielektrische Schicht; CVD-Verfahren; Oxidation; Oxidation}, language = {en} } @phdthesis{Calvet2002, author = {Calvet, Wolfram}, title = {Pr{\"a}paration und in-situ Charakterisierung MBE-gewachsener Kupferindiumdisulfid-Schichten}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-000000242}, school = {BTU Cottbus - Senftenberg}, year = {2002}, abstract = {Die vorliegende Arbeit behandelt CuInS2-Filme, die mittels Molekularstrahlepitaxie auf einkristallinen Si- und GaAs-Substraten unterschiedlicher Orientierung abgeschieden wurden. In-situ kamen dabei photoelektronenspektroskopische Analysemethoden und die Beugung niederenergetischer Elektronen zum Einsatz. Ex-situ wurden die Filme mittels R{\"o}ntgenstrukturanalyse, Ionenr{\"u}ckstreuung und Photolumineszenz untersucht. Zun{\"a}chst wurde die Bandanpassung des Si(111)/CuInS2(112)-Hetero{\"u}bergangs bestimmt, wobei die Grenzfl{\"a}che durch das Auftreten von Fremdphasen und durch Interdiffusion nicht ideal und stark gest{\"o}rt erscheint. Es wurde ein Grenzfl{\"a}chendipol von etwa 1 eV ermittelt. Der Vergleich der chemischen Zusammensetzung an der Filmoberfl{\"a}che und im Filmvolumen deutet auf einen Konzentrationsgradienten in der Schicht hin. Unabh{\"a}ngig vom Cu/In-Verh{\"a}ltnis wurde eine schwefelarme Oberfl{\"a}che gefunden. Zudem zeigen Cu-reiche CuInS2-Filme unabh{\"a}ngig von der Substratorientierung ein [112]-orientiertes Wachstum, wogegen im In-reichen Pr{\"a}parationsregime die Kristallorientierung des Substrates {\"u}bernommen wird.}, subject = {Kupferindiumsulfid; D{\"u}nne Schicht; Molekularstrahlepitaxie}, language = {de} } @phdthesis{FelixDuarte2016, author = {Felix Duarte, Roberto}, title = {Analysis and optimization of interfaces in "wide-gap" chalcopyrite-based thin film solar cell devices}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus4-37402}, school = {BTU Cottbus - Senftenberg}, year = {2016}, abstract = {The chemical and electronic structure of chalcopyrite absorbers with different bulk band gap energies, Egbulk, [i.e., low-gap Cu(In,Ga)Se2 (CIGSe, Egbulk ~ 1.2 eV) and wide-gap CuInS2 (CIS, Egbulk ~ 1.5 eV)] and of buffer/absorber heterointerfaces based on these materials are studied with soft and hard x-ray spectroscopy techniques. Mechanisms that benefit (limit) the performance of low(wide)-gap chalcopyrite-based solar cells are identified. This knowledge is used to develop surface tailoring treatments to optimize buffer/absorber heterointerfaces based on wide-gap chalcopyrites and improve the performance of their solar cells. Photoemission spectroscopy (PES) characterization of the two absorbers (i.e., CIGSe and CIS) reveal compositional-depth profiles. The changes detected in CIGSe include: a near surface Ga-depletion, a strongly Cu-poor surface and a strong presence of surface Na that (likely) occupies Cu vacancies. A similar Cu-deficiency is found in CIS. The depth-composition changes result in significant widening of the band gap at the surface, Egsurf, (i.e., CIGSe, Egsurf: 1.70 ± 0.2 eV and CIS, Egsurf: 1.88 ± 0.2 eV) as evident by ultraviolet photoelectron spectroscopy (UPS) and inverse photoemission spectroscopy (IPES) measurements. Differences in the interaction of the CIGSe and CIS surfaces with deposited buffer materials are identified. PES and modified Auger parameter studies reveal strong intermixing at the CdS/CIGSe and ZnS/CIGSe heterointerfaces. S L2,3 x-ray emission spectroscopy (XES) measurements of CIGSe substrates submitted to CdS chemical bath deposition (CBD-CdS) treatments show the formation of In2S3 and defect-rich/nanostructured CdS at the interface, compounds with higher band gap values than the measured Egsurf for CIGSe. S L2,3 XES spectra of CIGSe substrates submitted to CBD-ZnS treatments reveal the formation of (Zn,In)(S,Se)2 chemical analogs at the interface. PES and XES measurement series show that the CdS/CIS heterointerface is more abrupt, with no detected interface chemical species. Direct measurement of the band alignment of these heterointerfaces reveals: an ideal conduction band offset (CBO) configuration for CdS/CIGSe (i.e., CBO: +0.11 ± 0.25 eV), a spike CBO configuration for ZnS/CIGSe (i.e., CBO: +1.06 ± 0.4 eV), and a highly unfavorable cliff CBO configuration for CdS/CIS (i.e., CBO: -0.42 ± 0.25 eV). The performance of solar cell devices based on these heterointerfaces is correlated to their CBO configuration. Two surface tailoring approaches intended to correct the CBO configuration of the CdS/CIS heterointerface are presented. One method is based on rapid thermal processing (RTP) selenization treatments of CIS absorbers, aiming to exchange Se for S in treated samples. The idea behind this approach is to modify the surface of a wide-gap chalcopyrite so that it forms a more favorable heterointerface with CdS, such as heterointerfaces within low-gap chalcopyrite devices. X-ray fluorescence analysis and PES measurements of RTP-treated CIS samples show a greater treatment effect at the surface of the sample compared to the bulk (i.e., surface [Se]/[S+Se] range: 0.23 ± 0.05 to 0.83 ± 0.05, compared to bulk [Se]/[S+Se] range: 0.01 ± 0.03 to 0.24 ± 0.03). Tuning of the Cu:In:(S+Se) surface composition from a Cu-poor 1:3:5 to a 1:1:2 stoichiometry is observed in RTP-treated CIS samples with lower to higher surface Se contents, respectively. UPS measurements show a shift in valence band maximum toward the Fermi level in samples with higher surface Se content (i.e., -0.88 ± 0.1 to -0.51 ± 0.1 eV), as expected for a reduction in Egsurf due to exchange of Se for S. Ultraviolet-visible spectrophotometry reveals a reduction in the optical band gap of samples with greater Se incorporation (i.e., from 1.47 ± 0.05 to 1.08 ± 0.05 eV), allowing for a working window for optimization purposes. The second tailoring method involves surface functionalization of CIS absorbers with dipole-charge-inducing self-assembled monolayers (SAM) of benzoic acid derivatives and thiol molecules. The introduction of dipole charges between a heterointerface can tune the relative alignment of the electronic bands composing its electronic structure; thus, use of a suitable dipole-inducing SAM could correct the CBO misalignment in the CdS/CIS heterointerface. UPS measurements of the secondary electron cut-off region of CIS samples treated with a selected set of SAMs show a work function modulation of CIS (i.e., 4.4 ± 0.2 eV - 5.2 ± 0.2 eV). Small gains in solar cell parameters of solar cells based on SAM-modified heterointerfaces are measured. An overview of the performance of chalcopyrite(kesterite)-based solar cells in relation to the electronic properties of their corresponding buffer/absorber heterointerface suggests that optimization approaches extending beyond the buffer/absorber heterointerface may be needed for further performance gains in wide-gap chalcopyrite-based solar cell devices.}, subject = {Photovoltaics; Thin Film Solar Cells; Chalcopyrite absorbers; Solid-state Physics; Photovoltaik; R{\"o}ntgenspektroskopie; D{\"u}nnschichtsolarzelle; Chalkopyrit-Absorbermaterialien; Festk{\"o}rperphysik; X-ray spectroscopy; Kupferkies; D{\"u}nnschichtsolarzelle; Festk{\"o}rperphysik; Fotovoltaik}, language = {en} } @phdthesis{Hartmann2018, author = {Hartmann, Claudia}, title = {Surface and interface characterization of CH₃NH₃PbI₍₃₋ₓ₎Clₓ and CsSnBr₃ perovskite based thin-film solar cell structures}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus4-46358}, school = {BTU Cottbus - Senftenberg}, year = {2018}, abstract = {The chemical and electronic structure of hybrid organometallic (CH₃NH₃PbI₍₃₋ₓ₎Clₓ) and inorganic (CsSnBr₃) perovskite materials on compact TiO₂ (c-TiO₂) is studied using x-ray and electron based spectroscopic techniques. The morphology and local elemental composition of CH₃NH₃PbI₍₃₋ₓ₎Clₓ, used as absorbers in PV devices, defining the film quality and influencing the performance of respective solar cells is studied in detail by using photoemission electron microscopy (PEEM). An incomplete coverage, with holes reaching down to the c-TiO₂ was revealed; three different topological regions with different degrees of coverage and chemical composition were identified. Depending on the degree of coverage a variation in I oxidation and the formation of Pb⁰ in the vicinity of the c-TiO₂ is found. The valence band maxima (VBM) derived from experimental data for the perovskite and c-TiO₂, combined with information from literature on spiro-MeOTAD suggests an energy level alignment resulting in an excellent charge selectivity at the absorber/spiro-MeOTAD and absorber/c-TiO₂ interfaces respectively. Further, the derived energy level alignment indicates a large recombination barrier (~2 eV), preventing shunts due to direct contact between c-TiO₂ and spiro-MeOTAD in the pin-holes. In-situ ambient pressure hard x-ray photoelectron spectroscopy (AP-HAXPES) studies of 60 and 300 nm CH₃NH₃PbI₍₃₋ₓ₎Clₓ have been performed under varies conditions (i.e. vacuum/water and dark/UV light) to gain insight into the degradation mechanism responsible for the short lifetime of the absorber. The 60 nm perovskite forms Pb⁰ in water vapor (non-defined illumination) in presence of x-rays. The 300 nm perovskite sample shows a complex behavior under illumination/dark. In water vapor/dark the perovskite dissolves into its organic (MAI) and inorganic (PbI₂) components. Under illumination PbI₂ further decomposes to Pb⁰ induced by UV light and x-rays. For alternative inorganic CsSnBr₃ perovskites, the impact of SnF₂ on the chemical and electronic structure is studied to identify its role for the improved performance of the solar cell. HAXPES and lab-XPS measurements performed on CsSnBr₃ with and without SnF₂ indicate two Sn, Cs, and Br species in all samples, where the second Sn species is attributed to oxidized Sn (Sn⁴⁺). When adding SnF₂ to the precursor solution, the coverage is improved and less Sn⁴⁺ and Cs and Br secondary species can be observed, revealing an oxidation inhibiting effect of SnF₂. Additionally, SnF₂ impacts the electronic structure, enhancing the density of states close to the VBM.}, subject = {Perovskite; Photoelectron spectroscopy; Thin-film solar cell; Solid-state physics; Photovoltaics; Photovoltaik; Festk{\"o}rperphysik; D{\"u}nnschichtsolarzelle; Photoelektronenspektroskopie; Perowskite; Fotovoltaik; Halbleiter; D{\"u}nnschichtsolarzelle; Perowskit; Photoelektronenspektroskopie}, language = {en} } @phdthesis{Meier2004, author = {Meier, Ulrich}, title = {Grenzfl{\"a}chenverhalten und Morphologie des ZnO/Si-Heterokontaktes}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-000000551}, school = {BTU Cottbus - Senftenberg}, year = {2004}, abstract = {Als Modellsystem f{\"u}r gleichrichtende Heterokontakte von D{\"u}nnschichtsolarzellen wurden polykristalline ZnO-Filme auf Si mittels Magnetron-Sputtern und metallorganischer Gasstrahldeposition (MOCBD) abgeschieden. Mit Photoelektronenspektroskopie wurden bis zu 3 chemische Grenzfl{\"a}chenkomponenten gefunden: SiOx, eine Willemit-artige Mischphase und reduziertes Zn0. Letzteres kann {\"u}ber die Sputterparameter Bias-Potenzial und O2-Partialdruck kontrolliert werden. Mit MOCBD wurden auf Si(111):H abrupte Heterokontakte pr{\"a}pariert. Ferner tritt an Korngrenzen und der Oberfl{\"a}che Hydroxid auf. Dies kann durch Heizen entfernt werden. W{\"a}hrend der Messungen traten energetische Verschiebungen der Spektren auf, die die Auswertung der Grenzfl{\"a}chenenergetik st{\"o}ren. Zur Erkl{\"a}rung wurde folgendes Modell entwickelt: In einem schnellen Oberfl{\"a}chenprozess findet Photolyse von Hydroxid statt, wodurch H2O oder mobile OH-Gruppen gebildet werden, die Sauerstoffvakanzen ausheilen und so die n-Dotierung vermindern. In einem langsameren Volumenprozess wird durch Photolyse von ZnO die n-Dotierung erh{\"o}ht.}, subject = {Silicium; Zinkoxid; Magnetronsputtern; MOCVD-Verfahren; Photoelektronenspektroskopie; ZnO; Si; Interface reaction; XPS; PES}, language = {de} } @phdthesis{Das2015, author = {Das, Chittaranjan}, title = {Spectroscopic and electrochemical study of TiO₂/Si photocathode}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus4-36924}, school = {BTU Cottbus - Senftenberg}, year = {2015}, abstract = {Diese Dissertationsschrift besch{\"a}ftigt sich mit der Atomlagenabscheidung (ALD) d{\"u}nner TiO₂-Schichten auf p-Typ Silizium, untersucht die elektronischen Eigenschaften der abgeschiedenen Schichten und beschreibt die elektrochemische Charakterisierung von TiO₂/Si-Photoelektroden. Die Abscheidungsparameter, die elektronischen Eigenschaften und die Stabilit{\"a}t der TiO₂/Si-Proben werden miteinander korreliert. Mittels der ALD-Technik wurden TiO₂-Schichten mit zwei verschiedenen Prekursoren (Titan- Isopropoxid und Titan-Methoxid) auf Si-Substraten abgeschieden. Labor- und Synchrotron basierte R{\"o}ntgen-Spektroskopietechniken wurden benutzt, um die abgeschiedenen Schichten zu charakterisieren. Die Qualit{\"a}t der Schichten wurde dabei mittels R{\"o}ntgen-Photoelektronenspektroskopie (XPS) beurteilt, wobei die St{\"o}chiometrie, das Ti³⁺/Ti⁴⁺-Verh{\"a}ltnis sowie Defektzust{\"a}nde in den TiO₂-Filmen Kriterien darstellten. Um verschiedene Polymorphe von TiO₂ zu erhalten, wurde die Heizmethode der Schichten innerhalb der ALD-Prozedur variiert. Die elektronischen Eigenschaften amorpher und Anatas-TiO₂-Schichten wurden mittels Synchrotronstrahlung bestimmt und mit denen eines TiO₂-Rutil-Einkristalls verglichen. R{\"o}ntgen- Absorptionsspektroskopie (XAS) und resonante Photoelektronenspektroskopie (res-PES) wurden mit Synchrotronstrahlung durchgef{\"u}hrt. Dabei diente die XAS der Bestimmung der Art des Polymorphen und der elektronischen Struktur der TiO₂-Schichten. Res-PES-Messungen wurden an den O1s- und Ti2p- Kanten durchgef{\"u}hrt, um Auger-Prozesse mit multiplen Loch-Endzust{\"a}nden sowie polaronische und Ladungstransferzust{\"a}nde zu untersuchen und um die elektronische Bandl{\"u}cke der TiO₂-Schichten zu bestimmen. Eines der Hauptergebnisse dieser Arbeit stellt die Bestimmung der partiellen Zustandsdichten (pDOS) von Sauerstoff und Titan im Valenz- und Leitungsband dar. In der Analyse der res-PES-Daten wurde die pDOS mit den entsprechenden Bandkantenpositionen kombiniert, um die energetische Lage der Ladungsneutralit{\"a}tsniveaus (‚Charge neutrality levels') der verschiedenen TiO₂-Polymorphe zu ermitteln. Photoelektrochemische Messungen wurden an unbeschichteten und TiO₂-beschichteten Si- Photoelektroden durchgef{\"u}hrt. Dabei wurde die elektrochemische Performance der Photoelektroden in verschiedenen Elektrolytmedien mit pH-Werten zwischen 1 und 13 untersucht. Die Beschichtung der Si- Oberfl{\"a}che mit einer d{\"u}nnen TiO₂-Schicht verbesserte die Performance der Si-Photoelektrode, wobei die Stabilit{\"a}t der Elektrode in allen untersuchten Elektrolytmedien w{\"a}hrend der gesamten Messdauer von 12 Stunden erh{\"o}ht wurde. Außerdem wurde festgestellt, dass die TiO₂/Si-Photoelektrode weniger empfindlich auf {\"A}nderungen des pH-Wertes reagiert. Die elektrochemischen Ergebnisse werden auf Basis der elektronischen Eigenschaften der TiO₂-Schichten diskutiert. Die durch die spektroskopischen Messungen bestimmte elektronische Bandl{\"u}cke sowie die photoelektrochemischen Charakterisierungen werden zur Erkl{\"a}rung der Performance und Stabilit{\"a}t der TiO₂/Si-Photoelektroden herangezogen. Die Arbeit adressiert außerdem die Stabilit{\"a}t von mikrostrukturierten Photoelektroden (SiMP), die elektrochemisch pr{\"a}pariert wurden. Zun{\"a}chst verschlechterte sich die Stabilit{\"a}t der SiMP schneller als bei der planaren Si-Photoelektrode. Jedoch f{\"u}hrte die Nutzung einer TiO₂-ALD-Schutzschicht auf der SiMP zu einer besseren Gesamtperformance der SiMP auch im Vergleich zum System TiO₂/ planares Si.}, subject = {ALD; TiO2; Photocathodes; XPS; XAS; Atomlagenabscheidung; Photokathode; R{\"o}ntgenphotoelektronenspektroskopie; R{\"o}ntgenabsorptionsspektroskopie; Atomlagenabscheidung; Photokathode; R{\"o}ntgenabsorptionsspektroskopie; R{\"o}ntgen-Photoelektronenspektroskopie}, language = {en} } @phdthesis{Gerlich2012, author = {Gerlich, Lukas}, title = {In situ ARXPS Charakterisierung von tantalbasierten Barriereschichten}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus-28485}, school = {BTU Cottbus - Senftenberg}, year = {2012}, abstract = {Als eine Folge der Miniaturisierung aller integrierten elektrischen Bauteile wird der spezifische Widerstand der TaN/Ta Doppelsperrschichten ein zunehmend wichtiger Parameter f{\"u}r die Schaltgeschwindigkeit beim 32 nm Technologieknoten. In Rahmen dieser Arbeit wird die Optimierung der Abscheidung von TaN/Ta Stapeln durchgef{\"u}hrt, mit dem Ziel die Tantalnitridschichtdicke zu minimieren und das Tantal in der leitf{\"a}higeren alpha-Phase wachsen zu lassen. Im ersten Teil der Studie wurde in situ ARXPS verwendet, um das Wachstum von verschiedenen Tantalnitridschichten auf SiO2 und SiCOH in Abh{\"a}ngigkeit der Abscheidezeit, des Stickstoffflusses und der Abscheideleistung zu untersuchen. Im zweiten Teil wurde die kristalline Phase 20 nm dicken Tantal Schichten abgeschieden auf verschiedenen Tantalnitridschichten, die in der Wachstumsstudie vorgestellt worden sind, untersucht. Die wichtigsten Erkenntnisse sind das Auftreten von Tantalkarbid und Tantalsilizid als Zwischenschichtverbindungen bei der Abscheidung auf SiCOH und nur Tantalsilizid f{\"u}r die Abscheidung auf SiO2. Demzufolge w{\"a}chst alpha-Tantal vorzugsweise auf Tantalkarbid und stickstoffreichen Zwischenschichten, w{\"a}hrend Silizid an der Schnittstelle das Wachstum von beta-Tantal f{\"o}rdert. Um die Ergebnisse zu {\"u}berpr{\"u}fen, wurden zwei weitere Modifikationen des Interfaces untersucht. So wurde eine kleinere Bias-Leistung f{\"u}r eine Abscheidung von Tantalnitrid auf SiO2 benutzt, um die Rolle des Tantalsilizids zu best{\"a}tigen. Außerdem wurde eine thermische Behandlung einer d{\"u}nnen Tantalschicht auf SiCOH durchgef{\"u}hrt, um die Rolle des Tantalkarbids zu best{\"a}tigen. Schließlich ergab die Kontaktwiderstandsmessung in Viaketten auf strukturierten Wafern f{\"u}r vier ausgew{\"a}hlte Prozesse tendenziell den gleichen Verlauf wie die Schichtwiderstandsergebnisse der entsprechenden Barrierenaufbauten der Experimente auf blanken Testwafern.}, subject = {Photoelektronenspektroskopie; Tantal; ARXPS; Barriere; Interface; Tantalum; ARXPS; Barrier; Interface}, language = {de} } @phdthesis{Schweizer2004, author = {Schweizer, Stefan}, title = {Dynamisches Verhalten von Silizium-Elektroden in Fluor-haltigen Elektrolyten}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-000000526}, school = {BTU Cottbus - Senftenberg}, year = {2004}, abstract = {Einige Effekte von Silizium sind bis heute ungekl{\"a}rt. Dazu z{\"a}hlt Oxidation von hoch-dotiertem n-Si in Fluor-haltigen S{\"a}uren im Dunkeln. Diese Oxidation wurde erstmals systematisch untersucht und zur Grundlage eines Modells f{\"u}r Elektroneninjektion gemacht. Die angenommenen Oberfl{\"a}chenkomplexen erkl{\"a}ren den Einsatz der Kennlinien. Weitere Untersuchungen zur Identifizierung des Komplexes sowie seiner energetischen Position bieten sich an. Mit zyklischen Voltammogrammen wurde gezeigt, dass die Vorschubgeschwindigkeit des Potentials entscheidend f{\"u}r die Gestalt der Kennlinien ist. Schon 20mV/s ist f{\"u}r das untersuchte System zu schnell, um einen Gleichgewichtszustand zu erreichen. Dies wird durch die Ausbildung von Hysteresen klar erkennbar. Der initielle Strompuls zeigt eine vielfache Stromdichte gegen{\"u}ber den bekannten Werten der nachfolgenden Oszillationspulse. Die Wasserstoff-terminierte Grenzfl{\"a}che wird innerhalb weniger Zehntelsekunden oxidiert und passiviert. Alle nachfolgenden Strompulse k{\"o}nnen als weniger gut synchronisierte Oxidationen verstanden werden.}, subject = {Silicium; Elektrochemische Oxidation; Cyclovoltammetrie; Silizium; Oxidation; Voltammogramm; Injektion ; AFM}, language = {de} } @phdthesis{Tavakoli2006, author = {Tavakoli, Mohammad Hossein}, title = {Numerical analysis of seeding process during Czochralski growth of oxide single crystals}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus-145}, school = {BTU Cottbus - Senftenberg}, year = {2006}, abstract = {A series of two-dimensional and three-dimensional quasi-steady state numerical simulations have been performed for the initial stages (seeding process) of the Czochralski (CZ) growth of oxide crystals using the finite element method (FEM). We have considered different cases and configurations with respect to real systems in the CZ-dielectrics laboratory of the Institute for Crystal Growth (IKZ). Using induction heating in metallic parts as heat source the fluid flow and temperature field were determined in the whole CZ system. The aim of these calculations was to investigate and reveal the effect of several parameters such as the geometry and location of an active afterheater with respect to the crucible, arrangement and design of thermal insulation, crucible bottom shape, and seed rotation rate on the flow and temperature field of the system and the seed-melt interface shape. The results demonstrate that the temperature and fluid flow in the gas domain is strongly affected by an active afterheater and its insulation as well as their geometry and position. The results also show the important role played by the seed rotation rate for influencing the shape of the seed-melt interface.}, subject = {Kristallz{\"u}chtung; Czochralski-Verfahren; Czochralski-Verfahren; Ankeimprozess; Temperaturverteilung; Kristallz{\"u}chtung; Czochralski method; Seeding process; Heat transfer; Induction heating}, language = {en} } @phdthesis{Goryachko2002, author = {Goryachko, Andriy}, title = {Investigations of perspective materials for aggressively scaled gate stacks and contact structures of MOS devices}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-000000342}, school = {BTU Cottbus - Senftenberg}, year = {2002}, abstract = {The thesis discusses a fundamental question of reconstruction on the Si(100) surface as well as three material combinations, which are important for perspective microelectronics technologies: Si/Pr2O3/Si(100), W/WNx/poly-Si/SiO2/Si(100), and CoSix/Si(100). A refined mixed ad-dimer model is developed for the Si(100)-c(4´4) reconstruction on the basis of scanning tunnelling microscopy investigations. A thermal stability of Pr2O3/Si(100) and Si/Pr2O3/Si(100) structures is studied with ion sputtering assisted Auger electron spectroscopy. The latter technique is also applied for precise determination of O and N content in the new W/WNx/poly-Si/SiO2/Si(100) structure, and to study the preferential sputtering of Si in CoSi2, CoSi, and Co2Si phases on Si(100) surface. The WSix/poly-Si/SiO2/Si(100) system, which was previously used in microelectronics, is studied for comparison. The preferential sputtering of Si in WSix is shown to be qualitatively similar as in the CoSix case.}, subject = {Silicium; Kristallfl{\"a}che; Praseodymoxide; MOS Wolframnitride; D{\"u}nne Schicht; Silicon; Praseodymium oxide; Tungsten nitride; Tungsten silicide; Cobalt silicide}, language = {en} } @phdthesis{Mai2014, author = {Mai, Alexander}, title = {Aluminium based micro mirrors exposed to UV laser light - in situ performance and degradation}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus4-31497}, school = {BTU Cottbus - Senftenberg}, year = {2014}, abstract = {The present thesis characterises aluminium based micro mirrors exposed to UV laser light. Such micro mirrors, used in highly integrated spatial light modulators, can for example be used as programmable masks in DUV micro lithography. Therefore they are sensitive to any performance loss arising from material degradation or changes in the mirror curvature. The key question addressed in this thesis is the investigation of the in situ curvature change, which means characterisation during a real laser irradiation. For this purpose a measuring station was designed, combining a phase-shift interferometer, an optical microscope and the laser irradiation of the sample at 248nm. The Phase-shift interferometry technique used is a very sensitive contactless optical measurement principle, which allows a resolution of the sample surface in the single-digit nanometer range. A multitude of irradiation tests were performed to describe the change of mirror curvature as a function of different irradiation parameters such as the pulse energy, the laser repetition rate or the ambient atmosphere. The most significant effect was detected by the variation of the applied pulse energy, which was in the range of 10⁻⁵J/cm²-10⁻²J/cm². A general conclusion was that a minimum energy of 10⁻⁵J/cm² at a repetition rate of 1kHz is required to detect any laser induced change of the mirror curvature. At higher energy levels two characteristic behaviours can be distinguished. Up to a level of 10⁻³J/cm² the mirrors show a permanent concave bowing in the range of λ/100. A further increase of the pulse energy causes an accumulating bowing in the opposite direction (convex) of λ/10 within some ten million laser pulses. However this convex bowing partially relaxes after the irradiation is stopped. Another aspect of the thesis was the determination of laser induced material degradation. For this purpose irradiated mirrors were investigated by means of different devices and analytical techniques such as atomic force microscopy (AFM), reflectometry and transmission electron microscopy (TEM). The AFM analysis showed a slight increase of surface roughness and a directional change of the grain size. As a result of the TEM analysis it turned out that arrangement and shape of the grains seems not to have changed. But after the irradiation the growth of a porous oxide layer up to 20nm on the upper mirror surface was noticed. Finally different hypotheses are proposed to explain the mechanisms behind the observed concave and convex bowing at particular pulse energies. In this connection it is assumed that the mirrors at pulse energies larger than 10⁻³J/cm² do not show a static bowing at all. It is rather assumed that the mirror bow oscillates with the laser repetition rate.}, subject = {SLM; Micro mirror array; MOEMS; Laser exposure; In situ; Kippspiegel; Aluminium; Ultraviolett-Bestrahlung; Laser; In situ; Mikrospiegel; Laserbestrahlung; MOEMS; SLM}, language = {en} } @phdthesis{Lupina2006, author = {Lupina, Grzegorz}, title = {Praseodymium Silicate high-k dielectrics on Si(001)}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus-421}, school = {BTU Cottbus - Senftenberg}, year = {2006}, abstract = {Aggressive scaling of the complementary metal-oxide-semiconductor (CMOS) transistors resulted in the silicon dioxide (SiO2) gate dielectrics being as thin as 1.2 nm in the state-of-the-art high performance transistors. In consequence, the leakage current due to direct tunneling of electrons through the gate oxide increased significantly resulting in an unacceptably high level of power dissipation. For this reason, it is very desirable to replace the SiO2 gate dielectric with an insulator of a higher dielectric constant (high-k). The higher dielectric constant allows for the use of physically thicker dielectric layers with high capacitance densities but strongly reduced tunneling currents. This work focuses on the preparation and characterization of Praseodymium silicate high-k dielectric layers on Si(001) and evaluates the potential of this material to replace SiO2 as a gate dielectric in the state-of-the-art and future CMOS technology generations.}, subject = {High-k dielectrics; Praseodymium silicate; XPS}, language = {en} } @phdthesis{Staedter2014, author = {St{\"a}dter, Matthias}, title = {Untersuchungen zu Fanoresonanzen in der resonanten Photoelektronenspektroskopie}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus4-31860}, school = {BTU Cottbus - Senftenberg}, year = {2014}, abstract = {Im Mittelpunkt der vorliegenden Arbeit stehen die Untersuchung von Fanointerferenzen innerhalb der wissenschaftlichen Methode der resonanten Photoelektronenspektroskopie. Basis dieser Methode ist die Interpretation aus dem Festk{\"o}rper emittierter Elektronen. Die detektierten Elektronen k{\"o}nnen dabei aus direkten Photoemissionen oder Deaktivierungsprozessen (Spectator-/Participator-Zerf{\"a}lle) nach resonanten Anregungen von Rumpfelektronen stammen. F{\"u}hren beide Prozesse zum selben Systemendzustand, k{\"o}nnen die emittierten Elektronen interferieren, was sich in der Auspr{\"a}gung eines charakteristischen Intensit{\"a}tsprofils, dem Fano-Profil, {\"a}ußert. Die Form des Intensit{\"a}tsprofils kann dabei {\"u}ber den Fanoparameter q beschrieben werden. Im Rahmen dieser Arbeit erfolgte die Diskussion von Fanointerferenzen an organischen (HOPG, Graphenflocken) und oxidischen (CuO, In2O3, SiO2) Materialsystemen. Im HOPG und den untersuchten Graphenflocken konnten mittels der Analyse der Fanoprofile exzitonische Zust{\"a}nde innerhalb der Bandl{\"u}cke nachgewiesen werden. Durch die Untersuchungen am CuO konnte die Variation des Fanoparameters in Abh{\"a}ngigkeit vom Grundzustand des Systems gezeigt werden. Die f{\"u}r die untersuchten In2O3 Einristalle beobachteten Interferenzen beruhen auf der Existenz besetzter Zust{\"a}nde an der Fermienergie. Abschließend konnte eine Korrelation des jeweils auftretenden Fanoparameters mit den beobachteten multi-hole-Auger-Zerf{\"a}llen nachgewiesen werden.}, subject = {Fano; Fanointerferenzen; Festk{\"o}rperphysik; In-gap Zust{\"a}nde; Resonante Photoelektronenspektroskopie; Fano-Effekt; Photoelektronenspektroskopie}, language = {de} } @phdthesis{Schulz2001, author = {Schulz, Detlev}, title = {Wachstumsph{\"a}nomene und Stickstoffdotierung bei der Sublimationsz{\"u}chtung von 6H-Siliciumcarbid}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-000000044}, school = {BTU Cottbus - Senftenberg}, year = {2001}, abstract = {Die Keimoberfl{\"a}che ist durch das Vorhandensein einer St{\"o}rschicht charakterisiert, die durch die mechanische Kristallbearbeitung hervorgerufen wird. Diese Schicht kann die Ursache f{\"u}r zus{\"a}tzliche Defekte sein. Die Untersuchungen der Oberfl{\"a}chenmorphologie zeigen, daß ein {\"U}berschuß an Silicium im Quellmaterial notwendig ist, um ein defektfreies Wachstum in den ersten Stadien zu erm{\"o}glichen. Sowohl ein Oxidationsschritt vor dem Wachstum als auch die Anwendung von fehlorientierten Keimen f{\"u}hrten nicht zum gew{\"u}nschten Stufenfluß. Im Konzentrationsbereich von 1x10^18 <= c_N (cm^-3) <= 3x10^19 wurden 6H-SiC-Einkristalle gez{\"u}chtet, sowohl auf (0001)- als auch (000-1)-Keimen. Der Einbau von Stickstoff bewirkt das Absinken der Wachstumsgeschwindigkeit, was mit dem ''site-competition''-Modell erkl{\"a}rt werden kann. Die S{\"a}ttigung der Stickstoffkonzentration im Kristall in Abh{\"a}ngigkeit vom N_2/Ar-Verh{\"a}ltnis konnte durch eine Langmuir-Isotherme beschrieben werden. Die Polarit{\"a}t der Keimoberfl{\"a}che beeinflußt den Stickstoffeinbau. Die Stickstoffkonzentration im gewachsenen Kristall ist auf der C-terminierten Fl{\"a}che ca. doppelt so hoch wie auf der Si-terminierten. Es wurde gezeigt, daß die Oberfl{\"a}chenmorphologie zus{\"a}tzlich zur Keimpolarit{\"a}t den Stickstoffeinbau beeinflußt.}, subject = {Siliciumcarbid; Polytypie; Kristallz{\"u}chtung; Stickstoff; Dotierung; Siliciumcarbid; 6H-Polytyp; Einkristallz{\"u}chtung; Stickstoffeinbau; Oberfl{\"a}chenmorphologie}, language = {de} } @phdthesis{Mandal2008, author = {Mandal, Dipankar}, title = {Ultra-thin films of a ferroelectric copolymer: P(VDF-TrFE)}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus-5628}, school = {BTU Cottbus - Senftenberg}, year = {2008}, abstract = {Spin-cast films of the ferroelectric copolymer P(VDF-TrFE) are attractive for various applications. For such films the question arises whether there exists a depending on film thickness of ferroelectric functionality. In this work, ultra-thin films of P(VDF-TrFE) up to 0.35nm of thickness have been successfully spin coated, which is quite promising in respect of low cost approach in the electronic industry. This thesis focuses on the preparation of the ultra-thin P(VDF-TrFE) copolymer film and its characterizations to find out a scientific guideline for the suitable application as a non-volatile memory element. Therefore, the ultra-thin film preparations have been investigated initially. Optimization of annealing parameters has been done to get the ferroelectric beta phase and thickness determination is also done carefully. The copolymer layer thickness could be determined down to about 0.35 nm. Photoelectron spectroscopy is used extensively for the characterization of the thin film. Eventually, longer time X-ray irradiation of the P(VDF-TrFE) sample may cause a phase change from ferroelectric to paraelectric. Therefore the X-ray irradiation time was also optimized. With photoelectron spectroscopy, the interface chemistry of the P(VDF-TrFE) copolymer and different electrode materials was studied. The interfaces aluminum/P(VDF-TrFE) and PEDOT:PSS/P(VDF-TrFE) are compared. PEDOT:PSS is a conducting polymer, Poly(3,4-ethylenedioxidethiophene): poly(styrenesulfonate). This data suggested that an interface layer is formed for electrodes, made of aluminum. An interface reaction occurs in both cases: for aluminum as top and as bottom electrode. In contract, the organic PEDOT:PSS electrode shows no chemical interaction with the P(VDF-TrFE) copolymer. The much lower reactivity of organic electrode, compare to aluminum, gives a direct hint to improved functional properties of thin organic ferroelectric films. In terms of a low cost approach for electronics, based on organic devices, the introduction of organic non volatile memories is of great importance. P(VDF-TrFE) copolymer is the material with a very hopeful perspective. In next part electrical measurements with P(VDF-TrFE) have been done. By capacitance voltage measurements, the ferroelectric behavior of the polymer by measurements at elevated temperatures (Curie-Point) is confirmed, a threshold for remanent poalrization for films below 100 nm is found, if aluminum electrodes are used, but with inert electrodes, a downscaling of a low coercitive field was possible down to ten nm. This is very important, because due to the high coercitive field of the copolymer (>50 MV/m), ultrathin films for low operation voltages are needed. A prerequisite for memory applications is a high retention time, this was also confirmed. By the help of Near edge X-ray Absorption Spectroscopy (NEXAFS) the possible ferroelectric dipole orientation have been also investigated. The average dipole orientation (perpendicular to the substrate) is observed up to 0.35 nm P(VDF-TrFE) copolymer films when PEDOT:PSS/Si substrate is used. The ferroelectric properties of ultrathin films down to a layer thickness of 10nm were characterized using spectroscopic (F1s NEXAFS) and electrical methods (Capacitance voltage). The results indicates an extrinsic switching mechanism with a much lower opera-tion voltage than for a collective intrinsic switching. Both independent methods agree that there is no critical thickness for spincoated copolymer films down to 10 nm, if an adapted system of electrodes is used.}, subject = {Grenzfl{\"a}chenchemie; Photoelektronenspektroskopie; Polymerfilm; Ultrad{\"u}nne Filme; Dipolorientierung; Nichtfl{\"u}chtige Speicher; P(VDF/TrFE) Copolymer; Ultra-thin film; Dipole orientation; Non volatile memory application; P(VDF/TrFE) copolymer}, language = {en} } @phdthesis{Dudek2011, author = {Dudek, Piotr}, title = {Atomic scale engineering of HfO2-based dielectrics for future DRAM applications}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus-22775}, school = {BTU Cottbus - Senftenberg}, year = {2011}, abstract = {Modern dielectrics in combination with appropriate metal electrodes have a great potential to solve many difficulties associated with continuing miniaturization process in the microelectronic industry. One significant branch of microelectronics incorporates dynamic random access memory (DRAM) market. The DRAM devices scaled for over 35 years starting from 4 kb density to several Gb nowadays. The scaling process led to the dielectric material thickness reduction, resulting in higher leakage current density, and as a consequence higher power consumption. As a possible solution for this problem, alternative dielectric materials with improved electrical and material science parameters were intensively studied by many research groups. The higher dielectric constant allows the use of physically thicker layers with high capacitance but strongly reduced leakage current density. This work focused on deposition and characterization of thin insulating layers. The material engineering process was based on Si cleanroom compatible HfO2 thin films deposited on TiN metal electrodes. A combined materials science and dielectric characterization study showed that Ba added HfO2 (BaHfO3) films and Ti added BaHfO3 (BaHf0.5Ti0.5O3) layers are promising candidates for future generation of state of the art DRAMs. In especial a strong increase of the dielectric permittivity k was achieved for thin films of cubic BaHfO3 (k~38) and BaHf0.5Ti0.5O3 (k~90) with respect to monoclinic HfO2 (k~19). Meanwhile the CET values scaled down to 1 nm for BaHfO3 and ~0.8 nm for BaHf0.5Ti0.5O3 with respect to HfO2 (CET=1.5 nm). The Hf4+ ions substitution in BaHfO3 by Ti4+ ions led to a significant decrease of thermal budget from 900°C for BaHfO3 to 700°C for BaHf0.5Ti0.5O3. Future studies need to focus on the use of appropriate metal electrodes (high work function) and on film deposition process (homogeneity) for better current leakage control.}, subject = {Mikroelektronik; Miniaturisierung; Dielektrikum; Elektrode; Metall; Dielektrika; Hoch-k Materialien; Untersuchung auf atomarer Skala; Dielectrics; High-k materials; Atomic Scale Engineering; HfO2-based materials; XPS}, language = {en} } @phdthesis{Karavaev2011, author = {Karavaev, Konstantin}, title = {In-situ Atomic Layer Deposition growth of Hf-oxide}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus-22617}, school = {BTU Cottbus - Senftenberg}, year = {2011}, abstract = {We have grown HfO2 on Si(001) by atomic layer deposition (ALD) using HfCl4, TEMAHf, TDMAHf and H2O as precursors. The early stages of the ALD were investigated with high-resolution photoelectron spectroscopy and x-ray absorption spectroscopy. We observed the changes occurring in the Si2p, O1s, Hf4f, Hf4d, and Cl2p (for HfCl4 experiment) core level lines after each ALD cycle up to the complete formation of two layers of HfO2. The investigation was carried out in-situ giving the possibility to determine the properties of the grown film after every ALD cycle or even after a half cycle. This work focused on the advantages of the in-situ approach in comparison to ex-situ experiments. The study provides to follow the evolution of the important properties of HfO2: contamination level, density and stoichiometry, and influence of the experimental parameters to the interface layer formation during ALD. Our investigation shows that the in-situ XPS approach for ALD gives much more information than ex-situ experiments.}, subject = {Atomlagenabscheidung; Atomlagenabscheidung; ALD; R{\"o}ntgen-Photoelektronenspektroskopie; XPS; HfO2; Atomic layer deposition; ALD; X-ray photoelectron spectroscopy; XPS; HfO2}, language = {en} } @phdthesis{Handick2016, author = {Handick, Evelyn}, title = {Surface and interface characterization by X-ray and electron spectroscopies - revealing the peculiarities of Cu(In,Ga)Se₂ chalcopyrite and CH₃NH₃PbI(₃-ᵪ)Clᵪ perovskite-based thin film solar cell structures}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus4-42431}, school = {BTU Cottbus - Senftenberg}, year = {2016}, abstract = {This thesis focuses on the investigation and characterization of the surfaces and interfaces of chalcopyrite-based Cu(In,Ga)Se₂ (CIGSe) and organo-metal mixed halide perovskites, specifically CH₃NH₃PbI(₃-ᵪ)Clᵪ thin film solar cell absorbers using various x-ray and electron spectroscopies. In particular, the impact of alkali treatments on the chemical and electronic surface and near-surface structure of CIGSe absorbers is studied. For CH₃NH₃PbI(₃-ᵪ)Clᵪ the compound formation is monitored and the peculiarities of the interface formation of CH₃NH₃PbI(₃-ᵪ)Clᵪ on compact and mesoporous TiO₂ are examined. Laboratory and synchrotron-based photoelectron spectroscopy are used to gain a depth-dependent picture of the chemical and electronic structure in the surface and near-surface region of CIGSe absorbers, focusing on the influence of NaF and NaF/KF post-deposition treatments (PDT) when compared to alkali-free CIGSe absorbers. The alkali-free and NaF-PDT absorbers show similar chemical properties, having a Cu and Ga poor surface region compared to the nominal bulk and the same chemical environment for indium and selenium. For the NaF/KF-PDT samples a K-In-Se compound is present on top of a Cu-In-Ga-Se compound, with a nanopatterned surface that is almost devoid of Cu and Ga. Further, for the NaF-PDT sample a near-surface electronic band gap of 1.61[+0.14/-0.51] eV is derived. In contrast, a large and more gradual change towards the surface is obtained for the NaF/KF-PDT absorber exhibiting a significant band gap widening of the surface, which is in agreement with a Cu- and Ga-devoid surface region and the formation of a K-In-Se surface compound. To in-situ monitor the compound formation of CH₃NH₃PbI(₃-ᵪ)Clᵪ on compact TiO₂ (c-TiO₂) hard x-ray photoelectron spectroscopy is used. During in-situ annealing a drop-casted layer of precursor solution on c-TiO₂ shifts in the perovskite related core levels can be observed upon reach the "transition temperature" of 80-100°C. Further the Cl signal decrease at the onset of annealing and shows a depletion in the surface region for annealing temperatures above 50°C. In addition, the chemical and electronic structure of the interface between perovskite and mesoporous TiO₂ (mp-TiO₂) or c-TiO₂ using different perovskite layer thicknesses are studied.}, subject = {Chalcopyrit; Perovskite; Photoelectron spectroscopy; Thin film solar cell; Chalkopyrite; Perowskite; Photoelektronenspektroskopie; D{\"u}nnschichtsolarzelle; Kupferkies; Perowskit; Photoelektronenspektroskopie; D{\"u}nnschichtsolarzelle}, language = {en} } @phdthesis{Rachow2017, author = {Rachow, Fabian}, title = {Prozessoptimierung f{\"u}r die Methanisierung von CO₂ - vom Labor zum Technikum}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus4-42625}, school = {BTU Cottbus - Senftenberg}, year = {2017}, abstract = {In dieser Arbeit konnte gezeigt werden, dass eine direkte Methanisierung von CO₂, die {\"u}ber die Sabatier-Gleichung, CO₂ + 4H₂ ↔ CH₄ + 2H₂O, beschrieben wird, im Labor- und im Technikums-Maßstab unter Variation verschiedenster Bedingungen realisierbar ist. Die Sabatier-Reaktion findet beschleunigt unter dem Einsatz von Katalysatoren statt. Unterschiedliche kommerzielle Katalysatoren auf Nickel und Ruthenium-Basis konnten auf ihrer Eignung f{\"u}r die Methanisierung untersucht werden und mit im Labor pr{\"a}parierte Katalysatoren verglichen werden. Relevante Gr{\"o}ßen zur Beschreibung der Aktivit{\"a}t der Katalysatoren ist der Umsatz an CO₂, die Ausbeute an CH₄ und die Selektivit{\"a}t bez{\"u}glich der Sabatier-Reaktion. Im Labor wurden Ums{\"a}tze und Ausbeuten von {\"u}ber 90\% und Selektivit{\"a}ten von nahezu 100\% gemessen. Durch eine {\"A}nderung der Temperatur, der Eingangsmenge an Gasen, der Katalysatormenge und des Druckes k{\"o}nnen die optimalen Prozessbedingungen f{\"u}r die Reaktion spezifiziert werden. Eine weitere Betrachtung galt der Messung mit synthetischen und realen Abgasen (Oxyfuel, CCS) und darauf bezogen, der Einfluss einer Verd{\"u}nnung des CO₂ durch Stickstoff und Sauerstoff und der Rolle von bekannten Katalysatorgiften wie Schwefel- oder Stickoxiden. Es konnte ein Zusammenhang zwischen der St{\"a}rke der Verunreinigung an Schwefel, der Reaktortemperatur und der Abnahme der katalytischen Aktivit{\"a}t ermittelt werden. Die Produktion von Kohlenmonoxid gibt zus{\"a}tzlich Aufschluss {\"u}ber stattfinden Teil-und Nebenreaktionen. Ergebnisse in der Laboranlage konnten zum Teil f{\"u}r den Aufbau einer Technikumsanlage, welche eine Vergr{\"o}ßerung zum Labor um den Faktor 5000 darstellt, genutzt werden. Eine Zahl von Experimenten wurde im Technikum wiederholt. Die Technikumsanlage ist dabei in der Lage ca. 250 kg CO₂ pro Tag aus CO₂-haltigen Abgasen in Methan umzuwandeln. Ein erweiterter Praxisbezug stellte die Einbindung des Technikums in einem Kraftwerk dar und die Messung mit realem Rauchgas. Ohne zus{\"a}tzliche Reinigungsschritte des Abgases konnten auch hier Ums{\"a}tze von 90\% erreicht werden. Eine komplexe Temperaturentwicklung und Erh{\"o}hung auf 600°C im Reaktor wurde aufgezeichnet und f{\"u}hrt dabei zur Abnahme des Umsatzes auf ca. 60\%. Bei diesen Temperaturen stellt sich ein Gleichgewicht zwischen, durch die exotherme Reaktion, erzeugter und abgef{\"u}hrter W{\"a}rme ein. Als Reaktionsprodukt wird ein Schwachgas erhalten, welches f{\"u}r die R{\"u}ckverstromung eingesetzt werden kann. In der Methanisierung von CO₂ besteht die M{\"o}glichkeit das CO₂ in einen Kreislauf (Power-to-Gas) zu binden und so die Emission von Treibhausgasen zu mindern. Das erzeugte Methan fungiert als chemischer Energiespeicher und tr{\"a}gt zur Stabilisierung des Stromnetzes bei.}, subject = {Katalyse; Methanisierung; Energiespeicher; Erneuerbare Energien; CO2-Nutzung; Catalysis; Methanation; Energy storage; Renewable energy; Carbon capture and storage (CCS); Methanisierung; Katalysator; Carbon dioxide capture and utilization; Energiespeicher; Power-to-Gas}, language = {de} } @phdthesis{Meyer2007, author = {Meyer, Moritz Andreas}, title = {Effects of advanced process approaches on electromigration degradation of Cu on-chip interconnects}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus-3509}, school = {BTU Cottbus - Senftenberg}, year = {2007}, abstract = {This thesis provides a methodology for the investigation of electromigration (EM) in Cu-based interconnects. An experimental framework based on in-situ scanning electron microscopy (SEM) investigations was developed for that purpose. It is capable to visualize the EM-induced void formation and evolution in multi-level test structures in real time. Different types of interconnects were investigated. Furthermore, stressed and unstressed samples were studied applying advanced physical analysis techniques in order to obtain additional information about the microstructure of the interconnects as well as interfaces and grain boundaries. These data were correlated to the observed degradation phenomena. Correlations of the experimental results to recently established theoretical models were highlighted. Three types of Cu-based interconnects were studied. Pure Cu interconnects were compared to Al-alloyed (CuAl) and CoWP-coated interconnects. The latter two represent potential approaches that address EM-related reliability concerns. It was found that in such interconnects the dominant diffusion path is no longer the Cu/capping layer interface for interconnects as in pure Cu interconnects. Instead, void nucleation occurs at the bottom Cu/barrier interface with significant effects from grain boundaries. Moreover, the in-situ investigations revealed that the initial void nucleation does not occur at the cathode end of the lines but several micrometers away from it. The mean times-to-failure of CuAl and CoWP-coated interconnects were increased by at least one order of magnitude compared to Cu interconnects. The improvements were attributed to the presence of foreign metal atoms at the Cu/capping layer interface. Post-mortem EBSD investigations were used to reveal the microstructure of the tested samples. The data were correlated to the in-situ observations.}, subject = {Elektromigration; Elektromigration; Kupfer; Leiterbahn; In-situ; Gef{\"u}ge; Electromigration; Cu interconnects; In-situ; Cu microstructure}, language = {en} } @phdthesis{Michling2013, author = {Michling, Marcel Frank}, title = {Spektroskopische Untersuchungen an organischen Materialien und Metalloxiden}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus-29014}, school = {BTU Cottbus - Senftenberg}, year = {2013}, abstract = {Im Rahmen der vorliegenden Arbeit wurde mit Synchrotron-basierenden, optischen und Elektronen-basierenden Methoden die elektronischen Eigenschaften zweier unterschiedlicher Materialklassen untersucht. Der Fokus lag dabei im besonderen auf der Bestimmung der Größe der Bandl{\"u}cke/HOMO-LUMO-L{\"u}cke und ihre Abhängigkeit der verwendeten Methode. Die zwei unterschiedliche Materialklassen, welche untersucht wurden sind folgende: Erstens die organischen Systeme Cobalt-Phthalocyanin und Fulleren. An Ihnen wird der Einfluss der verwendeten Messmethoden aufgezeigt und die sich draus ergebenen HOMO- LUMO-L{\"u}cken (elektronisch, Volumen, Oberfläche, optisch) diskutiert. Es zeigt sich, dass die optische Methode (Ellipsometrie) generell den kleinsten Wert und die elektronischen Methoden (XPS, XAS) den größten Wert ergeben. Die Gr{\"u}nde daf{\"u}r werden ausf{\"u}hrlich diskutiert. Durch die Kombination von XPS- , XAS- und Ellipsometrie-Messungen war es möglich die Orientierung der aufgedampften CoPc-Molek{\"u}le auf den SiO2-Substrat zu bestimmen. Zweitens wurden die Metalloxide HfO2, Al2O3, In2O3 und Ga2O3 aufgrund ihrer großen technologischen Bedeutung untersucht. Mit Hilfe von ALD Zyklus-f{\"u}r-Zyklus Experimenten konnten die elektronischen Eigenschaften von HfO2 in Abhängigkeit der ALD- Zyklenzahl und das Wachstum von HfO2 in den ersten Zyklen studiert werden. Auf Basis der XPS- und EELS-Ergebnisse wurde ein Wachstumsmodell entwickelt. Es wird ebenfalls der Einfluss einer Dipolschicht an der Grenzfläche HfO2/SiO2 auf die Größe der Bandl{\"u}cke in den EELS-Messungen diskutiert. Mittels resonanten Photoemission wurde ein neuer Auger-Mechanismus (3-Loch-Auger-Prozess) in den Oxiden gefunden. Dieser hat seine Ursache in Defekten. Defekte f{\"u}hren auch zu einer Fano-Anti-Resonanz, welche an der O1s-Absorptions-Kante beobachtet und diskutiert wird.}, subject = {Spektroskopie; Metalloxide; Spektroskopie; Organik; Metalloxide; Bandl{\"u}cke; 3h-Auger; Spectroscopy; Organics; Metal oxides; Band gap; 3h-Auger}, language = {de} } @phdthesis{Richter2013, author = {Richter, Matthias Hermann}, title = {Excitons and Polarons in resonant Auger decay processes}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus-29816}, school = {BTU Cottbus - Senftenberg}, year = {2013}, abstract = {Im Rahmen dieser Arbeit wird die elektronische Struktur von organischen Halbleitern, Graphen und {\"U}bergangsmetall (TM)-Oxyden (Co-PI als Katalysator f{\"u}r die Wasserspaltung), unter Nutzung von Synchrotron-Strahlung basierter Spektroskopie, untersucht. Der Schwerpunkt liegt hierbei bei den exzitonischen und polaronischen Effekten. F{\"u}r eine genaue Beschreibung der elektronischen Struktur dieser Materialien m{\"u}ssen auch Elektron-Phonon- und Elektron-Elektron-Wechselwirkungen, sowie Polarisation und exzitonische Effekte in Betracht gezogen werden. Von Exzitonen und Polaronen als lokalisierte Bandl{\"u}ckenzust{\"a}nde ist bekannt, dass diese die optischen Materialeigenschaften beeinflussen k{\"o}nnen. Dieser Einfluss kann im resonanten Auger Zerfall aufgedeckt werden. Sogar in TM-Oxyden k{\"o}nnen Polaronen und Exzitonen als Konsequenz von einem Sauerstoff 2p nach TM3d Ladungstransfer beobachtet werden. Hierf{\"u}r sind die folgenden drei Materialklassen f{\"u}r die Untersuchungen des Einflusses von Exzitonen und Polaronen im resonanten Auger Zerfall ausgew{\"a}hlt worden. Erstens wird die Existenz von lokalisierten polaronischen und exzitonischen Zust{\"a}nden anhand von Poly(3-hexylthiophene-2,5-diyl) (rr-P3HT) und Phenyl-C61-butyric acid methyl ester (PCBM) untersucht, welche als Lichtabsorber in organischen Solarzellen eingesetzt werden. Die Existenz von 2D-Polaronen, Singulett-Exzitonen und Triplett-Exzitonen wird f{\"u}r rr-P3HT belegt, wohingegen f{\"u}r PCBM nur Singulett-Exzitonen beobachtet werden. Singulett-Exzitonen zeigen ihren Einfluss auf den resonanten Auger Zerfall durch einen kombinierten Spectator-Participator (S+P) Auger Zerfall im π*-Band. Zweitens wird f{\"u}r eine ausf{\"u}hrliche Diskussion der (S+P) Zerf{\"a}lle hoch orientierter pyrolytischer Graphit (HOPG) untersucht. F{\"u}r Graphen, als eine Monolage HOPG, in dem keine Van-der-Waals-Kr{\"a}fte wirken, k{\"o}nnen weitere Kombinationen von Auger Zerf{\"a}llen beobachtet werden: ein Doppel Spectator (S+S) und ein Doppel Spectator (S+S)* Auger-Gain Zerfall im π*-Band. Drittens wird Co-PI (Kobaltoxyd-Verbindung) untersucht. Es handelt sich hierbei um ein TM-Oxyd welches als Katalysator f{\"u}r die Sauerstoffentwicklung in photoelektrochemischen Zellen verwendet wird. Selbst lokalisierte Exzitonen werden durch resonante Anregung eines Rumpfelektrons in einem selbst lokalisierten Lochzustand erzeugt und erm{\"o}glichen dadurch einen kombinierten Auger Zerfall (S+P). F{\"u}r jeden der neuartigen Auger Zerfallsprozesse {(S+P), (S+S) und (S+S)*} wird ein Zerfallsmodell vorgestellt.}, subject = {Exziton; Polaron; Auger-Effekt; Exziton; Polaron; Auger Zerfall; Exciton; Polaron; XAS; resPES; Auger decay}, language = {en} } @phdthesis{Israel2016, author = {Israel, Johannes}, title = {Sabatierbasierte autothermale katalytische Rauchgasmethanisierung im Technikumsmaßstab und R{\"u}ckverstromung im BHKW}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus4-41467}, school = {BTU Cottbus - Senftenberg}, year = {2016}, abstract = {Es konnte gezeigt werden, dass die direkte Methanisierung des Kohlenstoffanteils aus Rauchgas auf Grundlage der Sabatier-Reaktion im Rahmen des Power-to-Gas Ansatzes unter realen Bedingungen im Technikumsmaßstab m{\"o}glich ist. Es wurde ein Durchsatz von knapp 235 kg/d CO2 bei einer Gesamtraumgeschwindigkeit der Eduktgase von ca. 1500 h-1, was einem Durchfluss von 45 Nm³/h bei einem Reaktorvolumen von 30 dm³ entspricht, erreicht. Dabei wurde das Kohlenstoffdioxid direkt, ohne weitere Aufarbeitung des Rauchgases, mit mindestens 60\% Umsatz katalytisch zu Methan reduziert. Daf{\"u}r wurde ein Katalysator auf Nickelbasis verwendet. Des Weiteren hat sich gezeigt, dass f{\"u}r eine autotherme Betriebsweise der Methanisierung von Rauchgas der Sauerstoffanteil im Rauchgas eine notwendige Voraussetzung darstellt. Es hat sich dabei herausgestellt, dass das vorliegende Intervall von 4 - 6 Vol \% Sauerstoffanteil im Rauchgas aus konventionellen Braunkohlekraftwerken genau in dem notwendigen Bereich liegt, der f{\"u}r eine ausgeglichene W{\"a}rmebilanz sorgt. Die bei der Wasserstoff-Sauerstoffreaktion zus{\"a}tzlich frei werdende W{\"a}rme gleicht den k{\"u}hlenden Effekt des mitgetragenen Stickstoffes genau aus, wodurch die f{\"u}r die Sabatier-Reaktion ben{\"o}tigte Temperatur von mindestens 300 °C aufrechterhalten werden kann. Ohne den Sauerstoff k{\"o}nnte die Methanisierung nicht autotherm betrieben werden. Zudem ist die Reaktion selbstregulierend, die Reaktionstemperatur l{\"a}uft auf einen oberen Grenzwert von etwa 600 °C hinaus, wodurch Ums{\"a}tze von 60\% nicht unterschritten werden. Bei niedrigeren Temperaturen von ca. 400 °C konnten auch Ergebnisse von {\"u}ber 90\% CO2 Umsatz im Rauchgas erreicht werden. Diese Ergebnisse konnten sowohl unter Laborbedingungen, d.h. mit aus technischen Gasen synthetisch hergestelltem Rauchgas, gemessen werden, als auch mit realem Rauchgas direkt am Kraftwerk vor Ort reproduziert werden. Das bei der Rauchgasmethanisierung entstehende Produktgas weist eine Energiedichte von ca. 5 MJ/Nm³ auf, womit es zu den Schwachgasen gez{\"a}hlt wird. Hier konnte der Nachweis erbracht werden, dass eine Nutzung des Produktgases in einem R{\"u}ckverstromungskonzept mittels eines dezentralen Blockheizkraftwerkes, welches mit einem herk{\"o}mmlichen Wankelmotor betrieben wird, m{\"o}glich ist. Das "Proof of Principle" f{\"u}r einen geschlossenen CO2 Kreislauf unter realen Bedingungen mittels der Sabatier Reaktion wurde somit erbracht und l{\"a}dt dazu ein, diesen Weg weiter zu verfolgen.}, subject = {Sabatier; Methanisierung; Energiespeicher; Rauchgas; Kohlendioxid; Blockheizkraftwerk; Wasserstoff; BHKW; CCU; CHP; Energy storage; Carbon dioxid; Methanation; Flue gas; Sabatier; Hydrogen; CCU; Power-to-Gas; Combines heat and power plant; Rauchgasreinigung; Kohlendioxidemission; Methanisierung; Blockheizkraftwerk}, language = {de} } @phdthesis{Lehmann2007, author = {Lehmann, Carsten}, title = {Elektronische Struktur d{\"u}nner Halbleiterfilme (Chalkopyrite) als Absorbermaterialien f{\"u}r D{\"u}nnschichtsolarzellen}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus-4319}, school = {BTU Cottbus - Senftenberg}, year = {2007}, abstract = {Ziel der Arbeit war es, erstmalig die Bandstruktur des in D{\"u}nnschichtsolarzellen verwendeten Absorbermaterials CuInS2 zu bestimmen. Zu diesem Zweck konnte ein neues GSMBE-Verfahren mit TBDS als Schwefel-Precursor etabliert werden, um die Verwendung von elementarem Schwefel in einem UHV-System zu ersetzen. Zus{\"a}tzlich zu den abgeschiedenen Schichten wurde eine Spaltfl{\"a}che pr{\"a}pariert. Die Charakterisierung der Proben erfolgte in situ mittels XPS/UPS und LEED. F{\"u}r weitere ex situ Untersuchungen standen XRD und SEM zur Verf{\"u}gung. Die ARUPS-Untersuchungen zur Bestimmung der Bandstruktur fanden unter Verwendung von Synchrotronstrahlung statt. Die aufgenommenen Bandstrukturen wurden mit Bandstrukturberechnungen Eyerts und Zungers verglichen. Dabei gestattete eine Zusammenarbeit mit Eyert eine exakte Verifizierung jenseits hochsymmetrischer Verl{\"a}ufe. CuInS2(001) und CuInS2(112) wurden auf Si und GaAs abgeschieden und zeigte Wachstumsraten, die im Vergleich mit MBE-Verfahren {\"a}lterer Arbeiten um bis zu 85 \% geringer waren. Dies f{\"u}hrte auf Si zur Ausbildung von CuSi-Phasen, so dass sich Si als Substrat in diesem Verfahren als ungeeignet erwies. Die CuInS2-Abscheidung auf GaAs zeigte eine starke Abh{\"a}ngigkeit von der vorhandenen Oberfl{\"a}chenrekonstruktion. Eine 2x1-Rekonstruktion auf GaAs(100) f{\"u}hrte zu einer terrassierten CuInS2-Schicht. Eine Abscheidung auf der 2x2-rekonstruierten GaAs(111)A-Oberfl{\"a}che hatte eine facettierte CuInS2-Oberfl{\"a}che zur Folge. Auf schwefelpassiviertem, rekonstruktionsfreien GaAs(111)B zeigte sich dagegen facettenfreies CuInS2(112)-Wachstum in vorherrschender Chalkopyrit-Struktur. An den Oberfl{\"a}chen von Cu-reichen CuInS2-Schichten bildeten sich CuS-Kristallite. Diese polykristallinen Ablagerungen f{\"u}hrten bei ARUPS-Untersuchungen zu nicht-dispergierenden Zust{\"a}nden, die die Bandstrukturen der CuInS2-Schichten {\"u}berlagerten. Bei k-senkrecht-Messungen zeigte sich ein Zustand, dessen Dispersion stark von Berechnungen Eyerts abweicht. Sein Ursprung konnte nicht eindeutig abgeleitet werden konnte, da der Beobachtungsraum aufgrund von Endzustandseffekten und Satellitenst{\"o}rungen stark eingeschr{\"a}nkt war. Generell zeigt ein Vergleich der Berechnungen nach Eyert bzw. Zunger mit entsprechenden Messungen, dass beide Modellrechnungen zu Bindungsenergien f{\"u}hren, die gegen{\"u}ber den Messwerten zu niedrig sind. Die energetische Ausdehnung der charakteristischen Bereiche und deren Lage zueinander wird jedoch zutreffend beschrieben. Konsistent mit Beobachtungen in anderen Arbeiten an analogen Systemen erweist sich dabei die theoretische Behandlung der d-Zust{\"a}nde bei der Modellierung als kritisch. Die Bandl{\"u}cke zwischen d-Charakter-dominierten und p-Charakter-dominierten Bereich wird von Eyert {\"u}bersch{\"a}tzt, von Zunger dagegen untersch{\"a}tzt. Dies l{\"a}sst sich auf die verwendeten N{\"a}herungen (LDA (Zunger), GGA (Eyert)) des Austauschkorrelationspotentials zur{\"u}ckf{\"u}hren. Bei einer Anpassung der von Eyert berechneten Bandstrukturen durch einen geeigneten Energieoffset zeigten sich im Vergleich mit k-parallel-Messungen im Allgemeinen gute, nahezu perfekte {\"U}bereinstimmungen von beobachteten Dispersionsverl{\"a}ufen. Es konnten die effektiven Massen der L{\"o}cher f{\"u}r die k-parallel-Messungen bestimmt werden. Die Werte liegen in der Gr{\"o}ßenordnung des Literaturwertes, jedoch im Mittel bei doppelt so hohen Werten. Ein signifikanter, richtungsabh{\"a}ngiger Trend l{\"a}sst sich aufgrund der starken Streuung nicht feststellen. Im Rahmen der vorliegenden Arbeit konnte ausserdem gezeigt werden, dass die Verwendung eines (111)-Substrates zu einer Dom{\"a}nenbildung aufwachsender CuInS2(112)-Schichten f{\"u}hrt. ARUPS-Messungen an derartigen Schichten bestehen daher aus einer {\"U}berlagerung von Bandstrukturen entlang unterschiedlicher Richtungen. F{\"u}r zuk{\"u}nftige Arbeiten bietet es sich daher an, die (111)-substratinduzierte Fehlorientierung von (112)-Schichten durch ein Step-Flow-Wachstum auf Substraten mit Miscut zu unterbinden.}, subject = {Photovoltaik; D{\"u}nnschichtsolarzelle; Bandstruktur; Chalkopyrit; ARUPS; CIS; DFT; Band structure; Chalcopyrite; ARUPS; CIS; DFT}, language = {de} } @phdthesis{KlocekJolanta2011, author = {Klocek Jolanta,}, title = {Processing and investigation of thin films with incorporated carbon species for possible application as low-k materials}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus-24358}, school = {BTU Cottbus - Senftenberg}, year = {2011}, abstract = {In this thesis the detailed investigations concerning processing and stability of thin films including carbon species and their possible application as materials of a low dielectric constant (low k) are presented. In order to gather a complex information regarding the chemical, morphological and dielectric properties of the produced layer a combination of the spectroscopy: X-ray photoelectron spectroscopy (XPS), near edge X-ray absorption fine structure spectroscopy (NEXAFS) and Fourier transform infrared spectroscopy (FTIR), microscopy: atomic force microscopy (AFM) and electrical characterization: capacitance-voltage technique (CV) have been applied. The films deposited by means of variety of techniques have been described, ranging from evaporation, through spraying and dropping to spin-coating. Regarding the possible low-k application, a considerable attention has been paid to the hybrid organic-inorganic 3-aminopropyl-trimethoxysilane (APTMS) based composite materials enriched with carbon species coming from the following dopants: C60 fullerenes, [6,6]-phenyl-C61-butyric acid (PCBM), copper phthalocyanine (CuPc), and tris(dimethylvinylsilyloxy)-POSS (POSS). In the following thesis progressive steps leading to gradual decreasing of the resulting permittivity of the hybrid material is presented. As revealed by the performed investigations, the replacement of C60 within the APTMS based matrix by its better soluble derivative PCBM allows the increase of the concentration of the carbon species within the composite films. The introduction of POSS as an additional dopant gave the opportunity of increasing the resistance of the produced material against the ambient influence. With the excess of the POSS concentration an original fractal-shaped cluster formation has been observed. Finally, the dispersion of the properly chosen low concentration of CuPc and POSS molecules within the APTMS based matrix led to the fabrication of homogenous layer with an ultra-low dielectric constant of 1.8.}, subject = {R{\"o}ntgen-Photoelektronenspektroskopie; Rasterkraftmikroskopie; R{\"o}ntgen-Photoelektronenspektroskopie; Kapazit{\"a}t-Spannungs-Charakteristik; 3-Aminopropyltrimethoxysilan; Low-k-Materialien; Rasterkraftmikroskopie; X-ray photoelectron spectroscopy; Capacitance-voltage characterization; 3-Aminopropyltrimethoxysilane; Low-k materials; Atomic force microscopy}, language = {en} } @phdthesis{Zimmer2012, author = {Zimmer, Fabian}, title = {Herstellung und Charakterisierung hocheffizienter, mikromechanischer NIR-Beugungsgitter f{\"u}r den Einsatz in miniaturisierten Spektrometern}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus-25224}, school = {BTU Cottbus - Senftenberg}, year = {2012}, abstract = {Im heutigen Bereich der Analytik spielen optische Verfahren eine wichtige Rolle und kommen in unterschiedlichsten Anwendungen zum Einsatz. Vorteilhaft ist dabei die ber{\"u}hrungslose und zerst{\"o}rungsfreie Messung mit Licht, die die Analyse von kritischen Substanzen deutlich vereinfacht. Die optische Spektroskopie nimmt dabei einen wichtigen Teil der Analytik ein. Speziell die Nah-Infrarot (NIR)-Spektroskopie im Wellenl{\"a}ngenbereich von 780 nm bis 3000 nm weist zahlreiche Anwendungen auf, die von chemischen Reaktionen und Prozessanalysen, der Untersuchung von Polymeren und Textilien, der Qualit{\"a}tskontrolle von Fr{\"u}chten und Samen bis in die Medizintechnik reichen. Die hierf{\"u}r verwendeten NIR-Spektrometer sind {\"u}berwiegend als Spektrografen ausgelegt, wobei das dispersive Element fest eingebaut ist und das Spektrum {\"u}ber ein Galliumarsenid basiertes Diodenarray vermessen wird. Diodenarrays im NIR-Bereich sind kostenintensiv, tragen allerdings maßgeblich zur spektralen Aufl{\"o}sung der Spektrografen bei. Ein alternativer Ansatz ergibt sich durch Monochromatoren mit einem beweglichen dispersiven Element, wobei das Spektrum zeitabh{\"a}ngig {\"u}ber den Detektor streicht. Dadurch ist nur eine Einzeldiode als Detektor ausreichend. Die spektrale Aufl{\"o}sung ist in diesem Fall allerdings eine Funktion der zeitabh{\"a}ngigen Position des dispersiven Elements, die mit hoher Pr{\"a}zision kontrolliert und bestimmt werden muss. In Kombination mit schnellen Messzeiten eines Spektrums im Millisekunden-Bereich, ist eine makroskopische Realisierung sehr aufwendig. Die vorliegende Arbeit besch{\"a}ftigt sich alternativ mit der Herstellung und Charakterisierung eines mikromechanischen NIR-Beugungsgitters, durch das ein neuartiges, miniaturisiertes NIR-Spektrometer, basierend auf einer Monochromator-Konfiguration, realisiert werden konnte. Das Beugungsgitter basiert dabei auf einem resonant schwingenden Mikrospiegel, der als mikroelektromechanisches System (MEMS) mittels siliziumbasierter, oberfl{\"a}chennaher Volumen-mikromechanik hergestellt wurde. Dabei konnte durch den Einsatz des mikromechanischen Beugungsgitters ein {\"a}ußerst kompaktes und robustes NIR-Spektrometer (10 x 8 x 7,5 cm³) entwickelt werden, das als Monochromator-System einen deutlichen Kostenvorteil gegen{\"u}ber derzeitigen NIR-Spektrografen erzielen kann. Erforderlich war hierbei, die Anforderungen an das mikromechanische Beugungsgitter zwingend an den Randbedingungen des NIR-Spektrometers zu spiegeln und mit Ihnen in {\"U}bereinstimmung zu bringen. Durch eine gezielte Dimensionierung und Optimierung der mechanischen und optischen Eigenschaften des mikromechanischen Beugungsgitters, zu der unter anderem die Gr{\"o}ße, Beugungseffizienz, Schwingungsfrequenz, Schwingungsstabilit{\"a}t, Schockfestigkeit und ein Verfahren zur Detektion des zeitabh{\"a}ngigen Torsionswinkels geh{\"o}rte, konnte eine spektrale Aufl{\"o}sung des NIR-Spektrometers von unter 10 nm bei einem Wellenl{\"a}ngenbereich von 900 - 2500 nm erreicht werden. Gleichzeitig wurden 3 verschiedene Gitterstrukturen zur Maximierung der Beugungseffizienz untersucht, erfolgreich hergestellt und vermessen.}, subject = {MEMS; Mikrooptik; NIR-Spektroskopie; Datenauswertung; Mikrosystemtechnik; MEMS; Mikrooptik; Mikrospiegel; Spektrometer; Microsystem technology; MEMS; Microoptics; Micromirror; Spectrometer}, language = {de} }