@phdthesis{Blasl2017, author = {Blasl, Martin}, title = {Elektrooptisch induzierte Wellenleiter in paranematischen Fl{\"u}ssigkristallen}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus4-42215}, school = {BTU Cottbus - Senftenberg}, year = {2017}, abstract = {In dieser Arbeit wird die Entwicklung einer neuartigen fasergekoppelten Wellenleiterweiche beschrieben, womit erstmals das Anwendungspotential elektrooptisch induzierter Wellenleiter f{\"u}r komplexe faseroptische Anwendungen aufgezeigt wird. Die entwickelte Wellenleiterweiche kann das Licht einer Glasfaser auf zwei Glasfasern sowohl wechselseitig schalten als auch mit steuerbarem Leistungsverh{\"a}ltnis aufteilen. Hierzu wird das Prinzip elektrooptisch induzierter Wellenleiter genutzt. Bei diesem Prinzip entsteht in einer aus elektrooptischem Material bestehenden Schicht durch die lokale Brechzahl{\"a}nderung infolge eines elektrischen Feldes oberhalb einer Elektrode ein reversibler Wellenleiter. In den mittels Halbleitertechnologien gefertigten Wellenleiterstrukturen dient das fl{\"u}ssigkristalline Nematogen 5CB als elektrooptisches Material. Hierbei besitzt dessen paranematische Phase eine hohe Transmission {\"u}ber einen breiten Wellenl{\"a}ngenbereich, einen ausgepr{\"a}gten elektrooptischen Kerr-Effekt und eine Relaxationszeitkonstante kleiner einer Mikrosekunde. Neben dem Kerr-Effekt treten in paranematischen Fl{\"u}ssigkristallen elektrooptische Effekte h{\"o}herer Ordnung und ein f{\"u}r die Anwendung kritischer feldinduzierter nematisch-paranematischer Phasen{\"u}bergang auf. In diesem Zusammenhang wird die Eignung paranematischer Fl{\"u}ssigkristalle hinsichtlich der Verwendung in elektrooptisch induzierten Wellenleitern mittels des im Rahmen dieser Arbeit entwickelten D{\"u}nnschichtrefraktometers untersucht.}, subject = {Elektrooptik; Fl{\"u}ssigkristall; Paranematisch; Wellenleiter; Halbleitertechnologie; Electrooptics; Liquid crystal; Paranematic; Waveguide; Semiconductor technology; Elektrooptik; Fl{\"u}ssigkristall; Halbleitertechnologie; Lichtwellenleiter}, language = {de} } @phdthesis{Groenke2020, author = {Gr{\"o}nke, Martin}, title = {Synthesis and characterization of layered transition metal trihalides MCl₃ (M = Ru, Mo, Ti, Cr) and CrX₃ (X = Cl, Br, I)}, doi = {10.26127/BTUOpen-5282}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus4-52828}, school = {BTU Cottbus - Senftenberg}, year = {2020}, abstract = {The investigation of novel structure-to-property relations of many transition metal trihalides MX₃ by downscaling to promising monolayer is still pending. However, the production of two-dimensional MX₃ sheets that are both high crystalline and thin is an experimental challenge. This thesis is focused on the rational synthesis planning and the derived targeted preparation of thin MX₃ nanosheets (≤ 100 nm) on suitable substrates by chemical vapor transport (CVT) as well as their characterization by complementary analytical methods. CVT of nanosheets directly on substrates benefits of low timescales, less material consumption and only few structural distortions. For the determination of optimal growth conditions, the CVT processes of investigated compounds were initially simulated by using the Calphad method (program package TRAGMIN). Thus, the occurring transport efficient gas species and temperature dependent, dominating vapor transport equilibria were calculated to optimize the growth process in a direct and straightforward way. Based on prior simulation results single crystalline sheets of MCl₃ (M = Ru, Mo, Ti, Cr) and CrX₃ (X = I, Br, Cl) were successfully prepared at temperatures between 573 - 1023 K on YSZ (yttrium stabilized zirconia) or sapphire substrates. The adjustable CVT parameters (transport duration, temperatures or weighed starting material) were optimized with respect to the targeted synthesis of either bulk or nanosheets at substrates. Microsheets with thicknesses of less than 4 μm (α-TiCl₃) and about 20 nm thin nanosheets (α-RuCl₃, CrCl₃ and CrI₃) down to ultrathin flakes (≈ 3 nm, α-MoCl₃ and CrBr₃) were obtained by CVT. As a highlight, monolayers of α-RuCl₃ and CrCl₃ were isolated successfully by means of a subsequent delamination. The MX₃ sheets morphology and dimension was described by optical and electron microscopy, highlighting their two-dimensional nature. By several X-ray spectroscopy and diffraction techniques the desired composition (M:X = 1:3), high crystallinity and phase-purity of thick and thin MX₃ platelets was confirmed subsequently. With respect to MX₃ nanosheets a slight increase (α-RuCl₃, α-MoCl₃ and CrBr₃) or decrease (CrCl₃) in phonon energies was observed in comparison to their bulk counterparts. The magnetic properties of CrCl₃ micro- and nanosheets were determined to be solely ferromagnetic and thus different than those of the bulk samples. Finally, the structure-to-property relations were investigated at a first example. The catalytic properties of α-TiCl₃ microsheets were investigated by gas-phase polymerization of ethylene. By downscaling the catalysts thickness by CVT, we obtained an activity improvement of 24 \% in comparison to bulk α-TiCl₃.}, subject = {Crystal; Thermodynamic; Vapor phase; Synthesis; Simulation; Kristall; Thermodynamik; Gasphase; Synthese; Simulation; Syntheseplanung; {\"U}bergangsmetallverbindungen; Metallhalogenide; Rutheniumhalogenide; Molybd{\"a}nhalogenide; Gasphasenreaktion}, language = {en} } @phdthesis{Blasl2017, author = {Blasl, Martin}, title = {Elektrooptisch induzierte Wellenleiter in paranematischen Fl{\"u}ssigkristallen}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus4-40845}, school = {BTU Cottbus - Senftenberg}, year = {2017}, abstract = {In dieser Arbeit wird die Entwicklung einer neuartigen fasergekoppelten Wellenleiterweiche beschrieben, womit erstmals das Anwendungspotential elektrooptisch induzierter Wellenleiter f{\"u}r komplexe faseroptische Anwendungen aufgezeigt wird. Die entwickelte Wellenleiterweiche kann das Licht einer Glasfaser auf zwei Glasfasern sowohl wechselseitig schalten als auch mit steuerbarem Leistungsverh{\"a}ltnis aufteilen. Hierzu wird das Prinzip elektrooptisch induzierter Wellenleiter genutzt. Bei diesem Prinzip entsteht in einer aus elektrooptischem Material bestehenden Schicht durch die lokale Brechzahl{\"a}nderung infolge eines elektrischen Feldes oberhalb einer Elektrode ein reversibler Wellenleiter. In den mittels Halbleitertechnologien gefertigten Wellenleiterstrukturen dient das fl{\"u}ssigkristalline Nematogen 5CB als elektrooptisches Material. Hierbei besitzt dessen paranematische Phase eine hohe Transmission {\"u}ber einen breiten Wellenl{\"a}ngenbereich, einen ausgepr{\"a}gten elektrooptischen Kerr-Effekt und eine Relaxationszeitkonstante kleiner einer Mikrosekunde. Neben dem Kerr-Effekt treten in paranematischen Fl{\"u}ssigkristallen elektrooptische Effekte h{\"o}herer Ordnung und ein f{\"u}r die Anwendung kritischer feldinduzierter nematisch-paranematischer Phasen{\"u}bergang auf. In diesem Zusammenhang wird die Eignung paranematischer Fl{\"u}ssigkristalle hinsichtlich der Verwendung in elektrooptisch induzierten Wellenleitern mittels des im Rahmen dieser Arbeit entwickelten D{\"u}nnschichtrefraktometers untersucht.}, subject = {Elektrooptik; Fl{\"u}ssigkristall; Paranematisch; Wellenleiter; Halbleitertechnologie; Electrooptics; Liquid crystal; Paranematic; Waveguide; Semiconductor technology; Elektrooptik; Fl{\"u}ssigkristall; Halbleitertechnologie; Lichtwellenleiter}, language = {de} } @phdthesis{Stegler2020, author = {Stegler, Martin}, title = {Studies on the influence of mechanical stress on the properties of silicon sensor modules for the ATLAS Phase-II Upgrade}, doi = {10.26127/BTUOpen-5323}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus4-53230}, school = {BTU Cottbus - Senftenberg}, year = {2020}, abstract = {The subject of this thesis is the development and test of silicon strip detectors for the high luminosity upgrade of the tracking detector of the ATLAS experiment at the Large Hadron Collider. Special emphasis is devoted to the understanding of the impact of mechanical stress on the electrical properties and the particle detection performance of detector modules. First simulations were done to estimate the maximum expected stress on a sensor when operated at -30 °C within the future silicon strip tracking detector ITk, at ATLAS. The maximum stress in a worst case scenario is expected to be 27 MPa. Tensile strength tests were done to estimate the maximum stress which can be applied to a silicon strip sensor. Silicon shards, with a thickness and dopand concentration corresponding to the ITk sensor specifications break at >23 MPa, wafers at >700 MPa and sensors at ~ 400 MPa. The huge variations lead to the assumption, that the tensile stregth, which is highly dependent on the quality of the crystal lattice, is due to different cutting technology. Wafers, irradiated with a fluence equivalent of a lifetime dose of an ITk sensor, show no stress dependency of the youngs modulus. The tensile strength of irradiated wafers is decreased by ~ 6,6 \%. No damage on silicon sensors from mechanical stress is expected for sensor modules installed it the ITk. The electrical properties of silicon strip sensors were studied for applied mechanical stress on ATLAS07 sensors up to 60 MPa. The specifications of the sensors are similar to the specification of strip sensors in the future silicon strip tracker barrel region of the ATLAS detector. The leakage current changes at 50 MPa by -1.7 \%, the bias resistance by +0.8 \% and the interstrip resistance by -25 \%. The depletion voltage and the implant resistance are not affected by mechanical stress. Except for the interstrip resistance the results can be explained by piezoresistive effects. Silicon strip modules were build and studied in particle test beams. These modules consists of an ATLAS07 or an ATLAS12 sensor and an analogue readout to study the influence of stress on the module performance. The sensor module noise is independent from the applied stress. An effect of stress on the signal strength was seen. The ATLAS07 sensor module signal strength was decreased and the ATLAS12 sensor module signal strength was increased with a slope of ~0,6 MPa^-1. The average cluster size of the ATLAS07 sensor module was increased by 0,25 \% MPa^-1 and the average cluster size of the ATLAS12 sensor module was decreased by 0,06 \% MPa^-1 with applied stress.}, subject = {ATLAS; Piezoresistivity; Stress; Silicon; ITk; Silizium; Sensormodul; LHC; Silicium; Sensor; Piezowiderstand; ATLAS }, language = {en} } @techreport{KaucherKunathWinkler2018, author = {Kaucher, Christian and Kunath, Martin and Winkler, Herwig}, title = {Zukunft elektrochemischer Speicher f{\"u}r Hybridantriebe - Studienreport am Beispiel von Hybridrangierlokomotiven}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus4-45213}, year = {2018}, abstract = {Die Elektrifizierung des Antriebsstrangs ist derzeit eines der großen Zukunftsthemen der Automobilindustrie. Das Thema ist nicht nur f{\"u}r den Automobilsektor relevant, sondern bietet auch Potential f{\"u}r andere Bereiche der Mobilit{\"a}t. Ein Beispiel ist die Umr{\"u}stung von Diesel-Rangierlokomotiven und Diesel-Triebwagen auf hybride Antriebe. In verschiedenen Projekten konnte bereits gezeigt werden, dass sich Emissionen und Kraftstoffverbrauch so erheblich reduzieren lassen. Als wichtigste Komponente des hybriden oder elektrischen Antriebsstrangs ist der Energiespeicher zu sehen. Er bestimmt wesentlich {\"u}ber die erzielbare Reichweite sowie die Verbrauchs- und Leistungsparameter des Fahrzeugs. In dieser Studie wird daher ein {\"U}berblick {\"u}ber aktuell verf{\"u}gbare und sich in Entwicklung befindende Speichertechnologien sowie eine Einsch{\"a}tzung zu deren Weiterentwicklung gegeben. Der Fokus liegt dabei auf der Eignung der Speicher f{\"u}r die Anwendung in Hybridrangierlokomotiven. Zu diesem Zweck wurde einerseits eine umfassende Recherche in aktueller Fachliteratur durchgef{\"u}hrt. Andererseits erfolgte eine Befragung von Experten f{\"u}r elektrochemische Speicher aus Wissenschaft und Industrie. Darauf aufbauend erfolgte eine Bewertung der Eignung aktueller und zuk{\"u}nftiger Speichertechnologien f{\"u}r die Verwendung in Hybridrangierlokomotiven. Zur Visualisierung der zuk{\"u}nftigen Entwicklungen wurde eine Produkt- und Technologie-Roadmap f{\"u}r die relevanten Technologien erstellt.}, subject = {Hybridantriebe; Rangierlokomotive; Roadmap; Elektromobilit{\"a}t; Elektrochemische Speicher; Elektrolokomotive; Hybridantrieb; Elektrochemische Energiequelle; Energiespeicherung; Elektromobilit{\"a}t}, language = {de} } @techreport{SchwarickRohrHeiner2016, author = {Schwarick, Martin and Rohr, Christian and Heiner, Monika}, title = {MARCIE manual}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus4-40568}, year = {2016}, abstract = {This manual gives an overview on MARCIE - Model Checking And Reachability analysis done effiCIEntly. MARCIE was originally developed as a symbolic model checker for stochastic Petri nets, building on its predecessor - IDDMC - Interval Decision Diagram based Model Checking - which has been previously developed for the qualitative analysis of bounded Place/Transition nets extended by special arcs. Over the last years the tool has been enriched to allow also quantitative analysis of extended stochastic Petri nets. We concentrate here on the user viewpoint. For a detailed introduction to the relevant formalisms, formal definitions and algorithms we refer to related literature.}, subject = {Petri nets; Model checking; Model Checking; Petri-Netz}, language = {en} } @phdthesis{Warnecke2009, author = {Warnecke, Martin}, title = {Optimierung der Instandhaltungsplanung mit genetischen Algorithmen unter Ber{\"u}cksichtigung des Speicherverhaltens bei der Verf{\"u}gbarkeitsprognose von Kraftwerksanlagen}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus-5961}, school = {BTU Cottbus - Senftenberg}, year = {2009}, abstract = {In Zeiten des liberalisierten Strommarktes muss sich der Kraftwerkserrichter und -betreiber die Wahl seiner Prim{\"a}renergie und die Auslegung jedes einzelnen Kraftwerks hinsichtlich Emissionen und last but not least die Errichtungs- und sp{\"a}teren Betriebskosten genau {\"u}berlegen. Simulationen unter der Annahme verschiedener Szenarien sind bei diesem Marktumfeld zwingend erforderlich. Das Spannungsfeld zwischen Errichtungskosten, davon teilweise abh{\"a}ngiger Verf{\"u}gbarkeit, Instandhaltungsphilosophie und Betriebskosten bildet die Motivation f{\"u}r die Instandhaltungsoptimierung und Simulationen zur Verf{\"u}gbarkeitsprognose, die Thema dieser Arbeit sind. Der Schwerpunkt dieser Arbeit liegt auf der Planung der zeitbezogenen Instandhaltungsstrategie, bei der die Inspektion der Komponente nach einer vorgeschriebenen Zeitspanne erfolgt, die sich aus den Betriebs- und Herstellererfahrungen ableitet. Diese Problemstellung ist besonders anspruchsvoll, weil es durch Synergieeffekte zu starken Wechselwirkungen der Komponenten untereinander kommt. So besitzt jede Komponente ihre eigene theoretisch optimale Inspektionsperiode, im Verbund kann es jedoch sein, dass es wegen Freischaltungen oder Stillstandszeiten g{\"u}nstiger ist, einige Komponenten gemeinsam instandzuhalten und dabei eine einzelne Baugruppe vorzuziehen oder zur{\"u}ckzustellen. Die hieraus entstehenden Wechselwirkungen bilden eine nichtlineare, gemischt-ganzzahlige Berechnungsvorschrift f{\"u}r die Kostenabsch{\"a}tzung. F{\"u}r die Optimierung dieser Instandhaltungsplanung wurde in der vorliegenden Arbeit ein neuer Ansatz entwickelt. Nachdem festgestellt wurde, dass klassische Optimierungsverfahren dieses Problem der Instandhaltungsoptimierung nicht zufriedenstellend l{\"o}sen k{\"o}nnen, wurde eine L{\"o}sung auf Basis von „Genetischen Algorithmen" entwickelt. Gleichzeitig zur Instandhaltungsoptimierung wurde aufbauend auf vorangegangenen Arbeiten am Lehrstuhl die Methodik der Verf{\"u}gbarkeitsprognose komplexer kraftwerkstechnischer Anlagen weiterentwickelt und um die neue Komponente "Speicher" (ggf. mit Verlusten) erweitert. Mit dem Speichermodell wird die Verhaltensweise eines Speichers in die aufwandsreduzierte Monte-Carlo-Methode integriert.}, subject = {Kraftwerk; Instandhaltung; Optimierung; Instandhaltung; Genetische Algorithmen; Verf{\"u}gbarkeit; Monte-Carlo-Methode; Kraftwerk; Maintenance; Genetic algorithms; Availability; Monte-Carlo-Method; Power plant}, language = {de} } @phdthesis{Handreg2016, author = {Handreg, Martin}, title = {Entwurf von k{\"u}nstlichen neuronalen Netzen zur Regelung von Prozessgr{\"o}ßen in einer Schmelzwanne f{\"u}r Flachglas}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus4-39471}, school = {BTU Cottbus - Senftenberg}, year = {2016}, abstract = {In der vorliegenden Arbeit wird die Eignung von K{\"u}nstlichen Neuronalen Netzen hinsichtlich der Modellierung des komplexen Prozessverhaltens in einer Flachglasschmelzanlage analysiert. Die Identifikation und das Training der neuronalen Prozessmodelle erfolgen mit Messdaten einer Schmelzwanne f{\"u}r Flachglas. Im Vordergrund steht die Evaluation einer geeigneten Netzstruktur und die Parametrierung der Netzparameter. Dabei wird der Einfluss der einzelnen Netzparameter in Bezug auf die Genauigkeit der Netze eingehend untersucht. Anhand von Testdaten wird nachgewiesen, dass die qualit{\"a}tsbestimmenden Temperaturen und der Glasstand mit K{\"u}nstlichen Neuronalen Netzen hinreichend genau berechnet werden k{\"o}nnen. Auf Basis der entwickelten neuronalen Prozessmodelle wird anschließend eine modellbasierte pr{\"a}diktive Regelstrategie beschrieben. Neben der Auswahl des G{\"u}tekriteriums und des Optimierungsalgorithmus zur Berechnung zuk{\"u}nftiger Stellgr{\"o}ßen werden Richtlinien zur Dimensionierung der verf{\"u}gbaren Reglerparameter abgeleitet.}, subject = {K{\"u}nstliches Neuronales Netz; Pr{\"a}diktive Regelung; Levenberg-Marquardt-Algorithmus; Flachglas; Schmelzprozess; Artifical Neural Networks; Predictive control; Algorithm of Levenberg-Marquardt; Floatglas; Melting process; Neuronales Netz; Flachglas; Schmelzen}, language = {de} } @techreport{BaehrBuhlRadowetal.2019, type = {Working Paper}, author = {B{\"a}hr, Martin and Buhl, Johannes and Radow, Georg and Schmidt, Johannes and Bambach, Markus and Breuß, Michael and F{\"u}genschuh, Armin}, title = {Stable honeycomb structures and temperature based trajectory optimization for wire-arc additive manufacturing}, editor = {F{\"u}genschuh, Armin}, issn = {2627-6100}, doi = {10.26127/BTUOpen-5079}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus4-50796}, year = {2019}, abstract = {We consider two mathematical problems that are connected and occur in the layer-wise production process of a workpiece using Wire-Arc Additive Manufacturing. As the first task, we consider the automatic construction of a honeycomb structure, given the boundary of a shape of interest. In doing this we employ Lloyd's algorithm in two different realizations. For computing the incorporated Voronoi tesselation we consider the use of a Delaunay triangulation or alternatively, the eikonal equation. We compare and modify these approaches with the aim of combining their respective advantages. Then in the second task, to find an optimal tool path guaranteeing minimal production time and high quality of the workpiece, a mixed-integer linear programming problem is derived. The model takes thermal conduction and radiation during the process into account and aims to minimize temperature gradients inside the material. Its solvability for standard mixed-integer solvers is demonstrated on several test-instances. The results are compared with manufactured workpieces.}, subject = {Eikonal equation; Centroidal Voronoi tessellation; Additive manufacturing; Heat transmission; Mixed-integer linear programming; Geometric optimization; Additive Fertigung; Gemischt-ganzzahlige Programmierung; Geometrische Optimierung; Eikonal-Gleichung; Zentrierte Voronoi-Parkettierung; W{\"a}rmeleitung; Rapid Prototyping ; Eikonal; Ganzzahlige Optimierung; Geometrische Optimierung; W{\"a}rmeleitung}, language = {en} } @phdthesis{Ohlerich2009, author = {Ohlerich, Martin}, title = {Investigations of the physics potential and detector development for the ILC}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus-14409}, school = {BTU Cottbus - Senftenberg}, year = {2009}, abstract = {The International Linear Collider offers a lot of different interesting challenges concerning the physics of elementary particles as well as the development of accelerator and detector technologies. In this thesis, we investigate two rather separate topics - the precision measurement of the Higgs boson mass and of its coupling to the neutral gauge boson Z and the research and development of sensors for BeamCal, which is a sub-detector system of the ILC detector. After the Higgs boson has been found, it is important to determine its properties with high precision. We employ the Higgs-strahlung process for this purpose. A virtual Z boson is created in the electron-positron collisions, which emits a Higgs-boson while becoming on-shell. Using the so-called recoil technique, we determine the Higgs boson mass by reconstructing the Z boson momentum and using the center-of-mass energy of the colliding leptons. This technique allows to measure the Higgs boson mass without considering the Higgs boson decay, i.e. it can be applied even to a Higgs boson invisibly decaying. Monte-Carlo studies including a full detector simulation and a full event reconstruction were performed to simulate the impact of a realistic detector model on the precision of the Higgs boson mass and production cross-section measurement. Also, an analytical estimate of the influence of a given detector performance on the Higgs boson mass measurement uncertainty is given. We included a complete sample of background events predicted by the Standard Model, which may have a detector response similar to the signal events. A probabilistic method is used for the signal-background separation. Several other probabilistic methods were used to investigate and improve the measurement of the Higgs-strahlung cross-section and the Higgs boson mass from the recoil mass spectrum obtained after the signal-background separation. For a Higgs boson mass of 120 GeV, a center-of-mass energy of 250 GeV and an integrated luminosity of 50/fb, a relative uncertainty of 10\% is obtained for the cross-section measurement, and a precision of 118 MeV for the Higgs boson mass. The original motivation to use the recoil technique for a Higgs boson mass measurement independent on its decay modes could not be completely confirmed. For a Higgs boson mass of 180 GeV and 350 GeV, a statistics corresponding to 50/fb is not sufficient to achieve the necessary significance of the recoil mass peak above the background. The BeamCal is a calorimeter in the very forward region, about 3 m away from the nominal interaction point and surrounding the beam pipe. Due to its location, a lot of beamstrahlung pair particles will hit this calorimeter, representing a challenge for the operational reliability of the sensors under such harsh radiation conditions. We investigated single-crystal and polycrystalline CVD diamond, gallium arsenide and radiation-hard silicon as sensor candidates for their radiation hardness and found that diamond and gallium arsenide are promising. We used a 10 MeV electron beam of few nA to irradiate the samples under investigation up to doses of 5 MGy for diamond, up to about 1.5 MGy for gallium arsenide and up to about 90 kGy for silicon. We measured in regular periods the CCD to characterize the impact of the absorbed dose on the size of the signal, which is generated by electrons of a Sr-90 source crossing the sensor. Additional measurements such as the dark current and the CCD as functions of the voltage completed the characterization of the sensor candidates. For the single-crystal CVD diamond, also the thermally stimulated current was measured to determine amongst others the defect density created by irradiation. In the diamond samples, evidence for strong polarization effects inside the material was found and investigated in more detail. A phenomenological model based on semi-conductor physics was developed to describe the sensor properties as a function of the applied electric field, the dose and the dose rate. Its predictions were compared with the results of the measurements. Several parameters such as time scales and cross-sections were determined using this model, which led to ongoing investigations.}, subject = {Detektor; Speicherring; Higgs-Teilchen; Higgs-Bosonmasse; Detektor; Detektorentwicklung; ILC; Higgs boson mass; Detector development; ILC}, language = {en} }