@article{ErtugrulEmdadiHaertel2025, author = {Ertugrul, G{\"o}khan and Emdadi, Aliakbar and H{\"a}rtel, Sebastian}, title = {Powder production and additive manufacturing of iron aluminide alloys using plasma ultrasonic atomization and laser-directed energy deposition}, series = {Additive Manufacturing Letters}, volume = {14}, journal = {Additive Manufacturing Letters}, publisher = {Elsevier}, address = {Amsterdam}, issn = {2772-3690}, doi = {10.1016/j.addlet.2025.100313}, year = {2025}, abstract = {With a combination of desirable properties such as low density, high specific yield strength, low material cost, and excellent oxidation and corrosion resistance, iron aluminide (Fe-Al) has shown considerable potential to be an alternative to high-alloy chromium steels, and in some cases even nickel-based superalloys, in hightemperature applications. Due to these features, it is especially suitable for the aerospace and automotive industries. Recent advancements indicate an increasing interest in Fe-Al within the additive manufacturing industry, particularly in directed energy deposition (DED) processes. Despite this progress, processing of Fe-Al materials using the laser directed energy deposition (L-DED) has not been sufficiently investigated. In this study, Fe-Al powder material was produced from a commercial Al rod encased in a commercial low alloy-steel tube by a plasma-based ultrasonic atomization eliminating the need to cast an alloy ingot in advance. Subsequently, the produced powder was used in a L-DED process to fabricate an additively manufactured sample. The sample was investigated in terms of mechanical property, microstructure, chemical composition, and phase structure by scanning electron microscope (SEM) / energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), electron backscatter diffraction (EBSD) and microhardness analyses.}, subject = {Iron aluminides (Fe-Al); Laser directed energy deposition (L-DED); Plasma ultrasonic atomization; Powder; Intermetallic phase}, language = {en} } @article{ErtugrulEmdadiJedynaketal.2025, author = {Ertugrul, G{\"o}khan and Emdadi, Aliakbar and Jedynak, Angelika and Weiß, Sabine and H{\"a}rtel, Sebastian}, title = {Hot forming behavior of tungsten carbide reinforced Ni-based superalloy 625 additively manufactured by laser directed energy deposition}, series = {Additive Manufacturing Letters}, volume = {13}, journal = {Additive Manufacturing Letters}, publisher = {Elsevier}, address = {Amsterdam}, issn = {2772-3690}, doi = {10.1016/j.addlet.2025.100267}, year = {2025}, abstract = {The demands of high-performance industries such as aerospace, automotive, tool manufacturing, oil, and gas industries are driving the innovation in high-performance materials and their production methods. This study explores the impact of hybrid manufacturing, specifically the effect of the addition of tungsten carbide (WC/W2C) via Laser-Directed Energy Deposition (L-DED), on the hot workability, hardness, and microstructure of nickel-based superalloy Inconel 625 (IN625). IN625 is known for its high temperature and high corrosion resistance, and tungsten carbide for its high wear resistance and grain refinement effect. The integration of WC/W2C particles into the IN625 matrix, in addition to the use of the hybrid approach of additive manufacturing followed by a hot-forming process, significantly influences the microstructure and mechanical behavior of the material. Thus, while incorporation of the WC/W2C can strengthen the material and extend the mechanical limitations, its full impact, including any potential usages, should be thoroughly evaluated for the intended application of the materials. To understand the effect of WC/W2C, additive manufacturing of IN625 both with and without WC/W2C and isothermal hot compression was carried out. The objective is to analyze the differences in microstructure and properties between L-DED manufactured IN625, and WC-reinforced IN625, and their hot-forming behavior, focusing on the effects of WC addition and post-deformation on microstructure and mechanical properties. This work represents the first investigation into the effect of WC/W2C hard particles on the hot-forming process of additively manufactured Ni-based metal matrix composites.}, subject = {Hybrid manufacturing; Laser-directed energy deposition (L-DED); Hot-forming; Inconel 625 (In625); Microstructure manipulation}, language = {en} }