@phdthesis{Oeztuerk1999, author = {{\"O}zt{\"u}rk, Arzu}, title = {Architektur der scaenae frons des Theaters von Perge}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-000000726}, school = {BTU Cottbus - Senftenberg}, year = {1999}, abstract = {Das heutige Antalya Ovasi, das im S{\"u}den der T{\"u}rkei liegt, war in der Antike unter dem Namen 'Pamphylien' bekannt. Reste der pamphylische Stadt Perge erstrecken sich 12 km von der Strandlinie landeinw{\"a}rts unterhalb einer Felsh{\"o}he. Das Theater von Perge ist in den Hang des H{\"u}gels Kocabelen im S{\"u}dwesten der Stadt hineingebaut. Die B{\"u}hnenfassade, die scaenae frons, war dreigeschossig mit einer Spielb{\"u}hne, dem Proskenion. Dennoch lag der B{\"u}hnenfassade keine einheitliche Planung zugrunde, sie ist vielmehr das Ergebnis von zwei Hauptbauabschnitten. Die Fassade bestand urspr{\"u}nglich aus einem Proskenion und einer zweigeschossigen scaenae frons. In der zweiten Bauphase wurde das erste Proskenion abgetragen und ein neues errichtet. Zudem wurde die zweigeschossige scaenae frons um ein drittes Geschoß erh{\"o}ht. Nach der Bauornamentik ist anzunehmen, daß sich die Errichtung der ersten Fassade von der Mitte des 2. Jhs. n. Chr. bis {\"u}ber die Jahrhundertwende hinweg hinzog. Das dritte Geschoß und das zweite Proskenion wurden etwa zehn bis dreizig Jahre sp{\"a}ter (220-240 n. Chr.) errichtet als die Abschnitte der ersten Bauphase.}, subject = {Perge; Theater; Architektur; Geschichte; Modernisierung; scaenae frons; Theater; Perge; R{\"o}mische Architektur}, language = {de} } @article{CelikAtapekPolatetal.2023, author = {{\c{C}}elik, G{\"u}l{\c{s}}ah Akta{\c{s}} and Atapek, Şaban Hakan and Polat, Şeyda and Obrosov, Aleksei and Weiß, Sabine}, title = {Nitriding effect on the tribological performance of CrN-, AlTiN-, and CrN/AlTiN-Coated DIN 1.2367 hot work tool steel}, series = {Materials}, volume = {16}, journal = {Materials}, number = {7}, publisher = {MDPI}, address = {Basel}, issn = {1996-1944}, doi = {10.3390/ma16072804}, year = {2023}, abstract = {In this study, heat-treated and multisurface engineered DIN 1.2367 tool steel was subjected to room and elevated temperature wear tests, and the effect of nitriding on its tribological behavior was investigated. CrN, AlTiN, and CrN/AlTiN coatings with a total thickness of 2 µm were obtained by arc cathodic physical vapor deposition on conventional heat-treated and gas-nitrided steels. The white layer formed during nitriding was removed, and a diffusion layer (100 µm) was achieved in the cross section of the steel having a tempered martensitic matrix. The highest surface hardness was attained with an integral coating (CrN/AlTiN), and surface hardness increased even more after nitriding due to the formation of a multicomponent ceramic layer on top of the diffusion layer. The room temperature wear tests performed against an alumina counterpart revealed that (i) CrN/AlTiN-coated steel had the highest friction coefficient of 0.26, which further increased to 0.33 by nitriding due to the increase in shear strength, and that (ii) with increasing surface hardness, the specific wear rates (W) of the heat-treated and coated steels could be ranked as follows: WCrN/AlTiN < WAlTiN < WCrN. The wear rates decreased when nitriding was carried out prior to coating. In order to simulate the aluminum extrusion conditions, hot wear behavior of the surfaces against AA6080 alloy at 450 °C was investigated. The hot wear tests revealed that (i) high friction coefficients were reached due to the adhesive characteristic of aluminum to the surfaces, (ii) the nitrided and CrN/AlTiN-coated sample exhibited the lowest wear rate among all studied surfaces, and (iii) the film damage on the worn surfaces mostly occurred in the form of droplet delamination.}, subject = {DIN 1.2367; PVD coating; Wear; Characterization; PVD-Beschichtung; Verschleiß; Charakterisierung; Werkzeugstahl; Warmarbeitsstahl; Nitrierh{\"a}rten; Tribologie; Werkzeugpr{\"u}fung; Verschleiß}, language = {en} } @phdthesis{Zuehlke2004, author = {Z{\"u}hlke, Mario}, title = {Verteilt organisierte Mehrteilnehmer-Videokonferenzen f{\"u}r geschlossene Gruppen im Internet}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-000000540}, school = {BTU Cottbus - Senftenberg}, year = {2004}, abstract = {Videokonferenzen gelten als eine popul{\"a}re Anwendung in modernen Netzwerken. Trotz langj{\"a}hriger Erfahrungen geh{\"o}ren sie nicht zu den allt{\"a}glich genutzten Diensten. Videokonferenzdienste im Internet unterst{\"u}tzen meist offene Konferenzgruppen. Jedoch haben die Mehrzahl der allt{\"a}glichen Beratungen einen geschlossenen Charakter. Systeme, die geschlossene Gruppen unterst{\"u}tzen, basieren meist auf spezieller Studiotechnik. Desktop-Systeme lassen nur ein begrenztes Leistungsangebot zu. Besonders beim Aufbau von Mehrteilnehmer-Gruppen ist es schwierig, eine gute Dienstg{\"u}te bereitzustellen. Deshalb haben Systeme f{\"u}r geschlossene Gruppen bisher keine breite Anwendung gefunden. Die vorliegende Arbeit untersucht zwei An{\"a}tze zur Gestaltungsprinzipien von geschlossenen Mehrteilnehmer-Videokonferenzsystemen. Der Erste untersucht den Aufbau von globalen Konferenzen {\"u}ber den Verbund lokaler Systeme. Der Zweite, ein Peer-to-Peer-Konzept, untersucht die Unterst{\"u}tzung von geschlossenen Gruppen im Internet.}, subject = {Videokonferenz; IP; Teilnehmerrechensystem; Unicastingverfahren; {\"U}berlastkontrolle; Dienstg{\"u}te; Peer-to-Peer-Netz; Mehrteilnehmer-Videokonferenz; QoS; Peer-to-Peer; Gruppenkommunikation; Geschlossen Gruppe}, language = {de} } @phdthesis{Zoellner2014, author = {Z{\"o}llner, Marvin Hartwig}, title = {Microelectronics meets catalysis: An interdisciplinary approach on the structure-property relationship of single crystalline Ce1-xPrxO2-δ films on Si(111)}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus-30687}, school = {BTU Cottbus - Senftenberg}, year = {2014}, abstract = {Motivation: Ceria attracted a lot of attention for microelectronics (e.g. high-k gate oxide, buffer layer for heteroepitaxy) and catalysis (e.g. selectiveoxidative and dehydrogenating reactions), due to its inherent structural (similar crystal structures and small lattice mismatch with respect to silicon) and electronic (Ce4+/Ce3+ valence state variation and formation of oxygen vacancies) properties. Thus, single crystalline epitaxial ceria thin films are well investigated. Although, the neighbouring rare earth oxide, praseodymia, exhibits similar properties, this system is much less studied due to its complex phase diagram. Since both oxides exhibit a flexible structural (polymorphism) and electronic (valence state variation) behavior, it is of ongoing interest to study ceria-praseodymia mixed oxide thin films, in order to tune and improve certain characteristics for the respective applications in the field of microelectronics and catalysis. Goal: Therefore, the goal of this doctoral thesis is to grow and characterize in an interdisziplinary approach single crystalline and epitaxial, binary and ternary Ce1-xPrxO2-δ thin films in order to allocate high quality samples for further fundamental studies, devoted to the structural and electronic properties in the field of microelectronics and catalysis. Experimental: Such single crystalline and epitaxial Ce1-xPrxO2-δ thin films were grown on a Si(111) substrate by molecular beam epitaxy. An in-situ control of the crystal growth quality was achieved by reflection high-energery electron diffraction. A detailed structure characterization study was carried out by laboratory and synchrotron based X-ray scattering. Additionally, transmission electron microscopy gives a highly resolved structural insight. The structural characterization was supported by theoretical ab-initio calculations. To determine the stoichiometries and valence states of the ternary mixed oxide compounds, X-ray photoelectron spectroscopy was performed. The microscopic defect structure was investigated by Raman spectroscopy. Finally, a first insight into the catalytic behavior is gained by temperature programmed desorption experiments. Results: The structural investigation implicates an epitaxial, twin-free, exclusively type-B oriented CeO2(111) growth on Si(111) by using an ultra-thin hex-Pr2O3(0001) buffer layer. This became possible due to the crystallographic continuation of the oxygen sub-lattice and electronic conservation of the semiconducting behavior at the ceria/praseodymia interface. A stabilization of Pr4+ cations is predicted by ab-initio calculations to support this interface transition. On such a hex-Pr2O3(0001)/Si(111) support the growth of epitaxial ternary Ce1-xPrxO2-δ mixed oxides became also possible. A stoichiometry dependent study also implicates an interplay of the structural and electronic properties. In dependency on the Pr content, it turned out that truly mixed alloys with Pr3+ incorporation into the CeO2 fluorite crystal matrix and Ce3+ incorporation into the hex-Pr2O3 matrix were achieved. Between both extremes, it is shown that the Pr content leads to a higher tendency to form Ce3+ cations within a bixbyite lattice, but fluorite inclusions could not be excluded. In a first temperature dependent study on the reduction behavior, it was demonstrated by the linearly increasing behavior of the integral O2 desorption signal and the total lattice spacing difference of heated Ce1-xPrxO2-δ mixed oxides that the oxygen storage capacity can be tailored by Pr doping due to the Pr4+/Pr3+ redox system. Furthermore, it was found that the hydrocarbon oxidation process is mainly triggered by the Ce4+/Ce3+ redox system, since the desorption temperature of CO2 decreased with increasing Ce content. Outlook: In terms of future investigations, such epitaxial single crystalline Ce1-xPrxO2-δ/Si(111) heterostructures are of interest in both research fields, catalysis and microelectronics. They can be used as model catalytic systems in order to gain a deeper understanding of the structure and electronic correlation with the reaction mechanisms by a stepwise increasing of the systems complexity under defined reaction conditions. Furthermore, new applications of such a system might be evaluated in the field of microelectronics. Oxygen vancancy engineering is currently discussed in such rare earth oxides to explain and establish room temperature ferromagnetism phenomena in the area of spintronics.}, subject = {Seltenerdoxide; Heteroepitaxie; D{\"u}nnschichttechnik; Seltenerd-Oxide; Si(111); Heteroepitaktische D{\"u}nnfilme; Ceroxid; Praseodymiumoxid; Rare-earth oxides; Si(111); Heteroepitaxial thin films; Ceria; Praseodymia}, language = {de} } @phdthesis{Zwierz2014, author = {Zwierz, Radoslaw}, title = {Plasma enhanced growth of GaN single crystalline layers from vapour phase}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus4-30710}, school = {BTU Cottbus - Senftenberg}, year = {2014}, abstract = {Gallium nitride (GaN) is a III-V semiconductor, characterized by direct, wide band gap of 3.4 eV at RT. As a material of particular interest for opto- and power electronics applications, it has been thoroughly studied in recent years. Utilization of GaN homoepitaxy in manufacturing of laser diodes (LDs), light-emitting diodes (LEDs), power devices, etc. would be beneficial in terms of reducing defect density, thus improving their lifetime and performance. Yet cost-effective process for providing native GaN substrates has not been established so far. The focus of this work is put on development of a new method to grow single crystalline GaN layers from Ga vapour. Our approach exploits microwave (MW) plasma as a source of excited nitrogen species, in contrast to classical physical vapour transport (PVT)-based technique, in which ammonia (NH3) serves as a source of reactive nitrogen. Novelty of MW plasma enhanced growth of GaN from vapour lies in MW nitrogen plasma formation in the vicinity of the seed, at moderate pressure (200 - 800 mbar range), and concurrent physical vapour transport of Ga to the growth zone. Simulations of the growth setup (HEpiGaN software) and of the MW plasma source (CST Microwave software) have followed the extensive investigations of material properties. The growth setup and the MW plasma source, with the resonance cavity being its crucial part, have been constructed and implemented into the existing growth reactor. The stability of MW plasma in function of temperature and pressure has been studied along with its influence on the seed temperature, and thus on the growth conditions. Furthermore, optical emission spectroscopy (OES) has been utilized for in-situ characterization of the growth atmosphere. Studies on the interaction of Ga vapour with the nitrogen discharge were interpreted on the basis of the level structure of lower excited states of Ga. Deposition experiments have been conducted, using sapphire seeds, GaN, AlN and AlGaN templates, while GaN single crystalline layers have been grown on sapphire and GaN templates. Characterization of GaN layers have been done by various methods, i.e. structure of layers by scanning electron microscopy (SEM), their composition by energy dispersive X-ray spectroscopy (EDX) and secondary ion mass spectrometry (SIMS), and crystal quality by high resolution X-ray diffraction (HRXRD). Results of the characterization together with outcome of OES measurements revealed importance of carbon for the sub-atmospheric MW plasma enhanced growth of GaN from vapour. In addition, this fact was confirmed by experiments in the setup with reduced carbon content. Possible routes for GaN synthesis have been discussed, with the most probable being CN-assisted GaN formation. While CN was detected in the plasma spectra, there was no evidence for the existence of GaN molecules in vapour phase.}, subject = {GaN; Vapour growth; Microwave plasma; Z{\"u}chtung aus der Gasphase; Plasma; Galliumnitrid; Gasphase; Plasma}, language = {en} } @article{ZschechLechowskiKuturkovaetal.2024, author = {Zschech, Ehrenfried and Lechowski, Bartlomiej and Kuturkova, Kristina and Panchenko, Luliana and Kr{\"u}ger, Peter and Clausner, Andr{\´e}}, title = {Laboratory X-ray microscopy of 3D nanostructures in the hard X-ray regime enabled by a combination of multilayer X-ray optics}, series = {Nanomaterials}, volume = {14}, journal = {Nanomaterials}, number = {2}, publisher = {MDPI}, address = {Basel}, issn = {2079-4991}, doi = {10.3390/nano14020233}, year = {2024}, abstract = {High-resolution imaging of buried metal interconnect structures in advanced microelectronic products with full-field X-ray microscopy is demonstrated in the hard X-ray regime, i.e., at photon energies > 10 keV. The combination of two multilayer optics—a side-by-side Montel (or nested Kirkpatrick-Baez) condenser optic and a high aspect-ratio multilayer Laue lens—results in an asymmetric optical path in the transmission X-ray microscope. This optics arrangement allows the imaging of 3D nanostructures in opaque objects at a photon energy of 24.2 keV (In-Kα X-ray line). Using a Siemens star test pattern with a minimal feature size of 150 nm, it was proven that features < 150 nm can be resolved. In-Kα radiation is generated from a Ga-In alloy target using a laboratory X-ray source that employs the liquid-metal-jet technology. Since the penetration depth of X-rays into the samples is significantly larger compared to 8 keV photons used in state-of-the-art laboratory X-ray microscopes (Cu-Kα radiation), 3D-nanopattered materials and structures can be imaged nondestructively in mm to cm thick samples. This means that destructive de-processing, thinning or cross-sectioning of the samples are not needed for the visualization of interconnect structures in microelectronic products manufactured using advanced packaging technologies. The application of laboratory transmission X-ray microscopy in the hard X-ray regime is demonstrated for Cu/Cu6Sn5/Cu microbump interconnects fabricated using solid-liquid interdiffusion (SLID) bonding.}, subject = {X-ray microscopy; High-resolution radiography; Nanostructure; Advanced packaging; R{\"o}ntgenmikroskopie; Hochaufl{\"o}sende Radiographie; Nanostruktur; Erweiterte Verpackung; Nanostruktur; R{\"o}ntgenmikroskopie; Radiographie}, language = {en} } @masterthesis{ZoepkeSonntag2018, type = {Bachelor Thesis}, author = {Zoepke-Sonntag, Roger}, title = {Implementierung und Validierung einer verbesserten Partitionierungsstrategie f{\"u}r einen Finite-Volumen-L{\"o}ser zur Berechnung aeroelastischer Ph{\"a}nomene in Turbomaschinen}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus4-48083}, school = {BTU Cottbus - Senftenberg}, year = {2018}, abstract = {Diese Bachelorarbeit pr{\"a}sentiert die Implementierung und Validierung einer Partitionierungsstrategie mit graphentheoretischem Ansatz f{\"u}r aeroelastische Berechnungen in thermischen Turbomaschinen f{\"u}r den Rolls-Royce plc. (RR) firmeneigenen Str{\"o}mungsl{\"o}ser AU3D. Der Schwerpunkt liegt hierbei auf der effizienten Parallelisierung von reduzierten und dennoch akkuraten aeroelastischen Rechenmodellen der SPMR-Methode und der SAMR-Methode. Mit der momentanen Partitionierungsmethode kann das Potenzial dieser Modelle aufgrund des besonderen geometrischen Aufbaus nicht ausgenutzt werden und eine erfolgreiche Integration in den Entwurfsprozess ist nicht m{\"o}glich. Durch die exakte Darstellung der im Str{\"o}mungsl{\"o}ser auftretenden Kommunikation mittels eines Graphen und der Einbindung des externen Graphenpartitionierers Metis k{\"o}nnen nun auch reduzierte Modelle erfolgreich parallelisiert werden. Zuerst werden alle Gitterpunkte anhand der Gitterstruktur in einen Graphen transformiert. Zus{\"a}tzliche Verbindungen werden in Abh{\"a}ngigkeit des jeweilig vorliegenden Modells bestimmt und als zus{\"a}tzliche Information im Graphen abgespeichert. Anschließend wird mit Hilfe eines externen Graphenpartitionierers eine Partitionstabelle erstellt. Im Anschluss werden alle Paare, welche auf Grund des Str{\"o}mungsl{\"o}sers in einer Partition sein m{\"u}ssen, kontrolliert und falls notwendig ver{\"a}ndert. Die so produzierten Partitionen zeigen eine ausgeglichene Punkteverteilung und es k{\"o}nnen die geometrischen Besonderheiten in den getesteten Modellen verarbeitet werden. Unter Ber{\"u}cksichtigung der noch ausstehenden Validierungsarbeiten bez{\"u}glich des parallelen Str{\"o}mungsl{\"o}sers kann mit der neuen Partitionierungsmethode ein SPMR-Modell zur Berechnung von erzwungenen Schwingungen in weniger als 7 Stunden, statt in zweieinhalb Tagen, absolviert werden. Somit ist eine Integration von aeroelastischen Rechnungen in den Entwurfsprozess zuk{\"u}nftiger Triebwerksentwicklungen m{\"o}glich. Die vielseitige Anwendungsm{\"o}glichkeit f{\"u}r alle Arten von aeroelastischen Modellen konnte w{\"a}hrend der Laufzeit-Validierung gezeigt werden. Es wurde nachgewiesen, dass die neue Partitionierungsstrategie um eine Gr{\"o}ßenordnung weiter skaliert als die bisherigen Methoden. Somit k{\"o}nnen auch zuk{\"u}nftige Modellgr{\"o}ßen und Computercluster effizient genutzt werden und auch Vollmodelle innerhalb von 24 Stunden berechnet werden.}, subject = {Aeroelastik; Erzwungene Schwingungen; Finite Volumen Verfahren; Graph Partitionierung; Hochleistungsrechnen; Turbomaschine; Str{\"o}mungsmaschine; Finite-Volumen-Methode; Graphpartitionierung; Aeroelastizit{\"a}t; Erzwungene Schwingung}, language = {de} } @phdthesis{Zlatanović2018, author = {Zlatanović, Sanja}, title = {In-stream microbial carbon transformation under opposing stresses - drought and sediment transport}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus4-44896}, school = {BTU Cottbus - Senftenberg}, year = {2018}, abstract = {The mineralization of organic matter (OM) is an important ecosystem service that has come under pressure because of increased frequency of droughts and higher sediment loads in running waters. In particular, lowland streams in temperate regions may experience reinforced sediment transport through migratory ripples and changes of naturally sorted sand and gravel in streambeds towards sand-dominated, homogenized streambed structure. The impact on microbial carbon (C)-transformation from these changes was the main focus of my doctoral thesis, in particular the impact of (i) periodic mechanical disturbance associated with ripple migration (ii) streambed structure homogenization, and (iii) drought in streambeds with sorted or homogenized sediment structure. In a set of microcosms, the significance of periodic mechanical disturbances for microbial C-transformation was tested. Thereby, the quantity and quality of the OM in the sandy sediments were varied by the addition of leaves and fish feces to the OM-poor sands. The results revealed that periodic mechanical disturbances resulted in significant decrease in microbial respiration to a low and similar level regardless of OM quality contained in sand. The importance of the streambed structure (sorted vs homogenized) for C-transformation was tested using set of experimental streams. The focus was on the interaction between benthic and hyporheic microbial processes in C-transformation to better understand the consequences of streambed homogenization on microbial function. The results showed that sediment structure determines connectivity between the benthic and hyporheic zones. The lower water exchange in homogenized streambeds and thereby reduced supply of freshly produced bioavailable OM from the benthic to the hyporheic zone, curtailed microbial respiration in the latter affecting the water quality. The influence of a drought and rewetting was tested on C-transformation in streambeds with a sorted or homogenized sediment structure using experimental streams where one half of the streams were strongly shaded and the other half moderately shaded. The results showed that streambeds affected by droughts, either with sorted or homogenized sediment structure have a similar microbial activity at the first place controlled by shading, whereas microbial composition during drought and its recovery after rewetting was additionally affected by sediment structure. Overall, this doctoral thesis showed that in sediment transport- and drought-impacted streambeds (i) ripple migration results in decreased C-transformation regardless of the available quality of OM, (ii) homogenization of sorted sediment structure leads to a decrease in microbial C-transformation in the hyporheic zone, and (iii) interaction between sediment structure and shading alters microbial community composition especially critical for resistance and resilience of C-transformation during drought and rewetting.}, subject = {Environmental stressors; Hyporheic zone; C-cycling; Microbial community; Flumes; Umweltstressoren; Hyporheische Interstitial; Kohlenstoffumsatz; Mikrobielle Gemeinschaft; Rinnen; Hyporheisches Interstitial; Mikrobioz{\"o}nose; Mineralisation; Fließgew{\"a}sser}, language = {en} } @techreport{ZinkFritsch2022, author = {Zink, Benita and Fritsch, Manuel}, title = {Braunkohleausstieg in der Lausitz : Volks- und betriebswirtschaftliche Konsequenzen}, doi = {10.26127/BTUOpen-6787}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus4-67874}, year = {2022}, abstract = {Der geplante Braunkohleausstieg bis 2038 stellt die Lausitz vor große wirtschaftliche Herausforderungen, da die Region stark von der Braunkohleindustrie abh{\"a}ngig ist. Im Jahr 2021 waren in der Lausitz etwa 6.370 Personen direkt in der Braunkohleindustrie besch{\"a}ftigt, wobei fast 940 Millionen Euro Wertsch{\"o}pfung generiert wurden. Indirekt h{\"a}ngen weitere 5.195 Arbeitspl{\"a}tze und zus{\"a}tzliche Wertsch{\"o}pfung von der Industrie ab, was insgesamt 11.565 Arbeitspl{\"a}tze und 1,5 Milliarden Euro Wertsch{\"o}pfung ausmacht - das entspricht 2,2 Prozent der regionalen Arbeitspl{\"a}tze und 4,6 Prozent der Bruttowertsch{\"o}pfung. Der Produktionswert der Braunkohleindustrie bel{\"a}uft sich auf 4,5 Milliarden Euro oder 6,6 Prozent der regionalen Produktion. Die Umstrukturierung der Wirtschaft ist notwendig, um den Wegfall dieser Wertsch{\"o}pfung zu kompensieren. Besonders betroffen werden die direkt in der Braunkohleindustrie Besch{\"a}ftigten sein, aber auch die vorgelagerten Zulieferer sind erheblich gef{\"a}hrdet. Die Analyse zeigt, dass 18 Prozent der 4.273 Arbeitspl{\"a}tze in der Vorleistungsg{\"u}terherstellung f{\"u}r die Braunkohleindustrie als gering gef{\"a}hrdet gelten, da sie alternative Absatzm{\"a}rkte finden k{\"o}nnten. 56 Prozent der Arbeitspl{\"a}tze sind mittelm{\"a}ßig gef{\"a}hrdet, darunter wertsch{\"o}pfungsintensive Branchen wie Teile des Verarbeitenden Gewerbes und bestimmte Dienstleistungen. Hochgef{\"a}hrdet sind 26 Prozent der Arbeitspl{\"a}tze, insbesondere in der Logistik und im Transport. Sollten die gef{\"a}hrdeten Vorleistungsarbeitspl{\"a}tze verloren gehen, entspr{\"a}che dies einem R{\"u}ckgang von 1,3 Prozent der gesamten Wertsch{\"o}pfung in der Lausitz. Auch der durch den Konsum der braunkohleabh{\"a}ngigen Besch{\"a}ftigten generierte wirtschaftliche Impuls ist durch den Braunkohleausstieg bedroht. Der Einkommenseffekt wird den Konsum erheblich mindern, insbesondere wenn viele Arbeitspl{\"a}tze in der Braunkohleindustrie und ihren Zulieferunternehmen wegfallen. Um die negativen Effekte abzufedern und eine Abwanderung zu vermeiden, ist es entscheidend, den von Arbeitslosigkeit betroffenen Personen Perspektiven in der Region zu bieten. Zusammengefasst zeigt die Studie, dass der Braunkohleausstieg erhebliche wirtschaftliche Risiken f{\"u}r die Lausitz birgt, sowohl direkt in der Braunkohleindustrie als auch in den vorgelagerten Branchen. Ein fr{\"u}hzeitiges Erschließen alternativer Absatzm{\"a}rkte und Investitionsimpulse sind entscheidend, um die negativen Auswirkungen zu minimieren und die regionale Wirtschaft nachhaltig umzustrukturieren.}, subject = {Braunkohleausstieg; Lausitz; Konsequenzen; Lausitz; Strukturwandel; Braunkohlentagebau; Auswirkung; Braunkohlenindustrie; Wertsch{\"o}pfungskette; Privater Verbrauch; Brown coal phase-out; Lusatia; Consequences}, language = {de} } @phdthesis{Zimmer2012, author = {Zimmer, Fabian}, title = {Herstellung und Charakterisierung hocheffizienter, mikromechanischer NIR-Beugungsgitter f{\"u}r den Einsatz in miniaturisierten Spektrometern}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus-25224}, school = {BTU Cottbus - Senftenberg}, year = {2012}, abstract = {Im heutigen Bereich der Analytik spielen optische Verfahren eine wichtige Rolle und kommen in unterschiedlichsten Anwendungen zum Einsatz. Vorteilhaft ist dabei die ber{\"u}hrungslose und zerst{\"o}rungsfreie Messung mit Licht, die die Analyse von kritischen Substanzen deutlich vereinfacht. Die optische Spektroskopie nimmt dabei einen wichtigen Teil der Analytik ein. Speziell die Nah-Infrarot (NIR)-Spektroskopie im Wellenl{\"a}ngenbereich von 780 nm bis 3000 nm weist zahlreiche Anwendungen auf, die von chemischen Reaktionen und Prozessanalysen, der Untersuchung von Polymeren und Textilien, der Qualit{\"a}tskontrolle von Fr{\"u}chten und Samen bis in die Medizintechnik reichen. Die hierf{\"u}r verwendeten NIR-Spektrometer sind {\"u}berwiegend als Spektrografen ausgelegt, wobei das dispersive Element fest eingebaut ist und das Spektrum {\"u}ber ein Galliumarsenid basiertes Diodenarray vermessen wird. Diodenarrays im NIR-Bereich sind kostenintensiv, tragen allerdings maßgeblich zur spektralen Aufl{\"o}sung der Spektrografen bei. Ein alternativer Ansatz ergibt sich durch Monochromatoren mit einem beweglichen dispersiven Element, wobei das Spektrum zeitabh{\"a}ngig {\"u}ber den Detektor streicht. Dadurch ist nur eine Einzeldiode als Detektor ausreichend. Die spektrale Aufl{\"o}sung ist in diesem Fall allerdings eine Funktion der zeitabh{\"a}ngigen Position des dispersiven Elements, die mit hoher Pr{\"a}zision kontrolliert und bestimmt werden muss. In Kombination mit schnellen Messzeiten eines Spektrums im Millisekunden-Bereich, ist eine makroskopische Realisierung sehr aufwendig. Die vorliegende Arbeit besch{\"a}ftigt sich alternativ mit der Herstellung und Charakterisierung eines mikromechanischen NIR-Beugungsgitters, durch das ein neuartiges, miniaturisiertes NIR-Spektrometer, basierend auf einer Monochromator-Konfiguration, realisiert werden konnte. Das Beugungsgitter basiert dabei auf einem resonant schwingenden Mikrospiegel, der als mikroelektromechanisches System (MEMS) mittels siliziumbasierter, oberfl{\"a}chennaher Volumen-mikromechanik hergestellt wurde. Dabei konnte durch den Einsatz des mikromechanischen Beugungsgitters ein {\"a}ußerst kompaktes und robustes NIR-Spektrometer (10 x 8 x 7,5 cm³) entwickelt werden, das als Monochromator-System einen deutlichen Kostenvorteil gegen{\"u}ber derzeitigen NIR-Spektrografen erzielen kann. Erforderlich war hierbei, die Anforderungen an das mikromechanische Beugungsgitter zwingend an den Randbedingungen des NIR-Spektrometers zu spiegeln und mit Ihnen in {\"U}bereinstimmung zu bringen. Durch eine gezielte Dimensionierung und Optimierung der mechanischen und optischen Eigenschaften des mikromechanischen Beugungsgitters, zu der unter anderem die Gr{\"o}ße, Beugungseffizienz, Schwingungsfrequenz, Schwingungsstabilit{\"a}t, Schockfestigkeit und ein Verfahren zur Detektion des zeitabh{\"a}ngigen Torsionswinkels geh{\"o}rte, konnte eine spektrale Aufl{\"o}sung des NIR-Spektrometers von unter 10 nm bei einem Wellenl{\"a}ngenbereich von 900 - 2500 nm erreicht werden. Gleichzeitig wurden 3 verschiedene Gitterstrukturen zur Maximierung der Beugungseffizienz untersucht, erfolgreich hergestellt und vermessen.}, subject = {MEMS; Mikrooptik; NIR-Spektroskopie; Datenauswertung; Mikrosystemtechnik; MEMS; Mikrooptik; Mikrospiegel; Spektrometer; Microsystem technology; MEMS; Microoptics; Micromirror; Spectrometer}, language = {de} } @phdthesis{Zimbal2012, author = {Zimbal, Christine}, title = {Bestimmung der Gurney-Energien und JWL-Parameter zivil genutzter Sprengstoffe mittels Zylindertestverfahren}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus4-31652}, school = {BTU Cottbus - Senftenberg}, year = {2012}, abstract = {Die GURNEY-Energie l{\"a}sst Aussagen {\"u}ber den Energiegehalt eines Sprengstoffes und somit {\"u}ber sein Arbeitsverm{\"o}gen zu. Diese im milit{\"a}rischen Bereich etablierte Gr{\"o}ße wurde im Rahmen dieser Arbeit f{\"u}r verschiedene zivil genutzte Sprengstoffe bestimmt. Es wurden Sprengstoffe gew{\"a}hlt, die im gewerblichen Bereich h{\"a}ufig angewendet werden, z.B. in Steinbr{\"u}chen oder im Bergbau. Die Bestimmung der GURNEY-Energien dieser Gesteinssprengstoffe wurde mit dem ebenfalls aus dem milit{\"a}rischen Bereich adaptierten Zylindertestverfahren durchgef{\"u}hrt. Dazu wurden die Messbedingungen an die Anforderungen, die zivile Sprengstoffe an einen solchen Test stellen, angepasst. Ferner wurde eine neue Methode zur Aufzeichnung der Versuche entwickelt. Mit Hilfe einer Ultra-High-Speed-Kamera wurde die seitliche Zylinderrohraufweitung infolge der sich durch die Detonationswirkung ausbreitenden Schwaden aufgezeichnet. Dadurch ergeben sich neue M{\"o}glichkeiten zur Auswertung der Zylindertests. Im Gegensatz zu der {\"u}blicherweise eingesetzten Streak-Aufnahmetechnik k{\"o}nnen mit der hier verwendeten Methode mehr Informationen aus einem Versuch gewonnen werden. Aus den Zylindertestdaten lassen sich mit Hilfe der sogenannten GURNEY-Gleichung die GURNEY-Energien und auch die h{\"a}ufig verwendeten GURNEY-Konstanten ermitteln. Die JWL- Zustandsgleichung (Jones - Wilkens - Lee - Zustandsgleichung) beschreibt den Druckverlauf der sich ausbreiten Detonationsschwaden. Diese Zustandsgleichung ist Bestandteil verschiedener Computercodes zur numerischen Simulation von Detonationsprozessen. Da solche Simulationen immer mehr an Bedeutung gewinnen, ist eine Kenntnis der sprengstoffspezifischen Parameter auch f{\"u}r zivil genutzte Sprengstoffe wichtig. Bislang sind nur sehr wenige zivile Sprengstoffe hinsichtlich ihrer JWL-Parameter untersucht worden. Im Rahmen dieser Arbeit wurde ein einfaches N{\"a}herungsverfahren entwickelt, um die sprengstoffspezifischen JWL-Parameter der untersuchten zivilen Gesteinssprengstoffe durch partielles Fitting der aus den Daten der Zylindertestversuche erhaltenen Energiekurven zu bestimmen.}, subject = {Gurney-Energie; JWL-Parameter; Zylindertest; Gurney energy; Cylinder test method; Sprengstoff; Kinetische Energie; Dynamik; Simulation}, language = {de} } @phdthesis{Ziemann2019, author = {Ziemann, Torsten}, title = {Notwendige Optimalit{\"a}tskriterien f{\"u}r eine Klasse von Steuerungsaufgaben mit einem a priori gegebenen unendlichen Zeithorizont}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus4-49035}, school = {BTU Cottbus - Senftenberg}, year = {2019}, abstract = {In der vorliegenden Dissertation wird ein Beitrag zur Theorie der Steuerungsaufgaben mit einem a priori gegebenen unendlichen Zeithorizont geleistet. Diese Aufgabenklasse entsteht im Kontext der Quantenmechanik und der Theorie der Stabilisierung dynamischer Systeme, wo eine Divergenz des zu optimierenden Zielfunktionals ausgeschlossen werden muss. Es wird das Lebesgue-Integral zugrunde gelegt. Die Optimierung erfolgt in gewichteten Hilbertr{\"a}umen. Konkret werden Aufgaben betrachtet, deren Zust{\"a}nde Elemente eines gewichteten Sobolev-Raumes sind. Die Gewichtsfunktion µ mit µ(t)=exp(-⍴t), ⍴ > 0 ist dabei geeignet zu w{\"a}hlen. Hierzu wird der Parameter ⍴ > 0 aus der Dynamik bestimmt. Die Steuerungsaufgabe bettet sich so in eine konvexe Hilbertraumtheorie ein. Die zul{\"a}ssigen Prozesse lassen sich uniform in der Norm des Hilbertraumes majorisieren. Fast {\"u}berall punktweise konvergente Folgen zul{\"a}ssiger Zustandstrajektorien konvergieren gem{\"a}ß dem Satz von Lebesgue {\"u}ber die majorisierte Konvergenz auch in der Topologie des Hilbertraumes selbst. Dies erlaubt es, die Aufgabe zum einen mit Methoden der Funktionalanalysis zu studieren, zum anderen punktweise Argumente zu verwenden. Konkret wird die Dynamik im Sinn eines Anfangswertproblems nach Carath{\´e}odory studiert. Die lokal absolut stetige L{\"o}sung l{\"a}sst sich in den gewichteten Sobolev-Raum einbetten. Es gen{\"u}gen lokale, punktweise Argumente auf Seiten der Dynamik, um die Aufgabe in den Kontext einer Hilbertraumtheorie zu setzen. In diesem Kontext befasst sich die vorliegende Arbeit mit der Herleitung notwendiger Optimalit{\"a}tskriterien. Es werden zwei Maximumprinzipien vom Pontryagin-Typus bewiesen. Die Kernidee zum Beweis dieser Resultate bildet die Trennung konvexer Mengen. Konkret untersuchen wir einen konvexen und abgeschlossenen Variationskegel, welcher nicht den gesamten Hilbertraum aufspannt. Der Trennungssatz von Hahn-Banach liefert neben den Kernbedingungen des Maximumprinzips - kanonische Gleichung, Maximumbedingung - auch die explizite Existenz einer Adjungierten, welche der nat{\"u}rlichen Transversalit{\"a}tsbedingung gen{\"u}gt. Zur Konstruktion des Variationskegels werden entsprechend der beiden studierten Optimalit{\"a}tskriterien zwei unterschiedliche Arten der Variation verwendet. Zum einen wird eine auf Euler zur{\"u}ckgehende Variationsidee benutzt, zum anderen ein Ansatz, der auf Weierstraß zur{\"u}ckzuf{\"u}hren ist. Ein Vergleich der hergeleiteten Maximumprinzipien m{\"u}ndet in einer geeigneten Formulierung einer Variation im gewichteten Hilbertraum. Gleichzeitig zeigen sich nat{\"u}rliche Barrieren der konvexen Analysis auf. So k{\"o}nnen mit der in dieser Arbeit pr{\"a}sentierten Beweistechnik lediglich Aufgaben untersucht werden, welche eine bez{\"u}glich der Steuerung affin-lineare Dynamik besitzen.}, subject = {Optimale Steuerung; Unendlicher Zeithorizont; Notwendige Optimalit{\"a}tskriterien; Pontryagin Maximumprinzip; Affin-lineare Dynamik; Optimal control; Infinite horizon; Necessary optimality criteria; Pontryagin maximum principle; Affin-linear dynamics; Steuerungstheorie; Optimale Kontrolle; Optimalit{\"a}tsbedingung; Pontrjagin-Maximumprinzip}, language = {de} } @phdthesis{Zibar2023, author = {Zibar, Layla}, title = {Forced displacement urbanisms : territorial biographies and contemporary narratives in the Syrian refugee camps in the Kurdistan region of Iraq}, doi = {10.26127/BTUOpen-6297}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus4-62976}, school = {BTU Cottbus - Senftenberg}, year = {2023}, abstract = {Violent chronic conflicts, uprooting, and the continuous massive (re)generation of displacement waves constitute the main elements of the Kurds' history within nation-states' (changing) geographies. Today, Kurdish-inhabited territories represent palimpsests of involuntary dislocations and relocation stories, constantly (re)written by refuge-seeking/ granting (spatial) practices. Since 2011, contemporary uprisings and wars in Syria and Iraq have inscribed the Kurdistan Region of Iraq (KR-I) territories with a new layer of displacement stories. These territories acted as frontline receptors for consecutive Syrian refugees and Iraqi internally displaced waves seeking protection. Displacees found refuge in the rural, urban and newly set humanitarian camps' spaces; hence, they (temporarily) anchored and carved some sort of a presence within their receiving sites. The rationale behind such receiving sites' emergence, use and progression in the KR-I have historically oscillated between modernization, discipline, development and humanitarianism. Guided by the urbanism lens, this research aims to narrate the KR-I's forced displacement territorial biography of involuntary dislocated and (re)located Kurds. This narration chronologically traces these groups' newly (re)shaped receiving sites and how refuge-seeking/granting practices aggregated and (re) articulated the KR-I's territories. It investigates the ways in which these receiving sites act as seeds of emerging urbanities in such a politically contested region. On the one hand, the research zooms out and repositions these sites' emergence and spatial progression within a broader geopolitical context, socioeconomic conditionalities, uses and meaning subversions due to the ever-changing actors. On the other hand, it zooms closely into the newly set Syrian-Kurdish refugee camps in the KR-I within and beyond predefined (nation-state) belongings in their ever-distorted time-space frames. It securitizes on the ways in which these sites are conceived and inhabited to (re)claim rights "to" and "in" space, territory, history and future. Between the large and small pictures, the research investigates the human and the non-human spatial agency that (re)patches these ruptured Kurds' collective memories and contemporary narratives of where, when, what and with whom (a future) home rests. This study is an urgent call for the international and local constellation of actors to critically rethink their standardized ready-made solutions and piece-meal spatial interventions in geographies associated with chronic crisis, ever (re)branded under emergency, development and peace 'help' banners. It sets the basis for rearticulating and developing further research-based interventions that account for exhausted conflict-ridden (infra)structures, political sensitivities, socio-economic situations and environmental impacts.}, subject = {Refugee camps; Forced displacement urbanisms; Homing; Territorial biographies; Roots and routs; Fl{\"u}chtlingslager; Zwangsumsiedlung; Territoriale Biographien; Kurdistan-Irak; Fl{\"u}chtlingslager; Vertreibung; Siedlung; Geschichte}, language = {en} } @masterthesis{Zhong2023, type = {Bachelor Thesis}, author = {Zhong, Lingyu}, title = {Set Covering Probleme in der Funknetzplanung}, doi = {10.26127/BTUOpen-6355}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus4-63556}, school = {BTU Cottbus - Senftenberg}, year = {2023}, abstract = {In dieser Bachelorarbeit wird das Problem der Auswahl von Antennenstandorten f{\"u}r eine maximale r{\"a}umliche Abdeckung in 5G-Funknetzen untersucht. Das Hauptziel besteht darin, eine effiziente L{\"o}sung f{\"u}r dieses kombinatorische Optimierungsproblem zu finden, indem es als Partial Set Covering Problem formuliert und gel{\"o}st wird. Die Arbeit gliedert sich in zwei Teile: Der erste Teil bietet eine Einf{\"u}hrung in die mathematischen Grundlagen des Partial Set Covering Problems, einschließlich Definitionen, Formulierung und L{\"o}sungsverfahren. Im zweiten Teil wird ein praktischer Ansatz zur L{\"o}sung dieses Problems pr{\"a}sentiert, wobei realen Instanzen f{\"u}r die Auswahl von Antennenstandorten analysiert werden. Hierbei werden zwei Hauptfragen untersucht: 1) Wie kann die gegebene Instanz in ein Partial Set Covering Problem umformuliert werden? 2) Wie kann dieses Problem mithilfe eines heuristischen Verfahrens, insbesondere des Simulated-Annealing-Algorithmus, gel{\"o}st werden? Die Ergebnisse dieser Arbeit tragen dazu bei, fundierte Entscheidungen {\"u}ber den Aufbau von 5G-Netzen zu treffen und die Netzwerkabdeckung unter Ber{\"u}cksichtigung von Nebenbedingungen zu maximieren.}, subject = {5G-Funknetze; Antennenstandort-Optimierung; Kombinatorische Optimierung; Partial Set Covering Problem; Simulated-Annealing-Algorithmus; 5G radio networks; Antenna site optimization; Combinatorial optimization; Partial set covering problem; Simulated annealing algorithm; 5G; Funknetz; Antenne; Kombinatorische Optimierung}, language = {de} } @phdthesis{Zhao2014, author = {Zhao, Dapeng}, title = {Metal Injection Moulding of Titanium-Niobium alloys for biomedical applications}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus-30515}, school = {BTU Cottbus - Senftenberg}, year = {2014}, abstract = {The main subject of this work was the investigation of sintering behavior, microstructure, mechanical properties and biocompatibility of metal injection moulded (MIM) Ti-Nb alloys for biomedical applications. Commercially pure titanium (CP-Ti) samples were also fabricated by MIM as a reference. The sintering behavior of MIM Ti-Nb alloys was studied at first, in order to roughly determine the sintering parameters in the following investigations. Dilatometry was applied to investigate the linear shrinkage of MIM Ti-Nb samples from room temperature to 1500 °C at a heating rate of 3 °C/min under argon atmosphere. Various sintering parameters and Nb contents were used to investigate their influences on microstructure and mechanical properties of MIM Ti-Nb alloys by means of density measurements, optical microscopy (OM), X-ray diffraction (XRD), scanning electron microscopy (SEM) and mechanical testing. Transmission electron microscopy (TEM) and high energy X-ray diffraction (HEXRD) measurement were applied to investigate the nature and precipitation of the unexpected titanium carbide precipitates in MIM Ti-Nb alloys. Initial cell adhesion and cell proliferation assays of human umbilical cord perivascular cells (HUCPV) on MIM Ti-Nb alloys were performed for biocompatibility characterization. The results of this work show that MIM Ti-Nb and MIM CP-Ti samples have been successfully fabricated and the as-sintered samples show good shape retention without distortion compared to the green sample. The sintering process of MIM Ti-Nb alloys consists of three main steps - Ti-diffusion step, Ti-Nb-diffusion step and Matrix-diffusion step. With increasing sintering temperatures and time, MIM Ti-Nb alloys exhibit lower porosity and higher Young's modulus. A higher Nb content in MIM Ti-Nb alloys leads to an increase of carbide area fraction and porosity. The three factors - Nb content, carbide area fraction and porosity - determine the mechanical properties of MIM Ti-Nb alloys. An increase of Nb content and amount of carbides as well as a lowered porosity lead to a higher tensile strength. A decrease of Young's modulus can be expected with higher Nb content and porosity. A high amount of titanium carbides can result in very poor ductility, but annealing and quenching process can significantly improve the elongation by dissolving the carbides. MIM Ti-Nb alloys exhibit good biocompatibility, indicating their potential for implant applications.}, subject = {Metallpulver; Spritzgießen; Sintern; Titanlegierung; Nioblegierung; Ti-Nb Legierungen; Metallspritzgießen; Sintern; Titan-Karbid; Mechanische Eigenschaft; Ti-Nb alloys; Metal injection moulding; Sintering; Titanium carbide; Mechanical behaviour}, language = {en} } @phdthesis{Zhang2023, author = {Zhang, Yangwen}, title = {Self-sufficient semi-active vibration control of high-rise buildings under wind excitation by moveable double-skin facades}, issn = {2569-2798}, doi = {10.26127/BTUOpen-6381}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:co1-opus4-63811}, school = {BTU Cottbus - Senftenberg}, year = {2023}, abstract = {The accelerated urbanization has led to increasing tension on urban land use. In this context, more and more slender high-rise buildings are being built worldwide in pursuit of better economic benefits. However, these structures are susceptible to wind excitation due to their lower first natural frequency. Different passive, semi-active, and active damping systems have been developed to reduce wind-induced structural vibration. Among them, the tuned mass dampers are widely used and proved as a very effective method in practice. However, this system requires a large additional damping mass. This also causes additional reinforcement, which increases the cost and carbon footprint. A huge space near the top story of the building is needed for the installation. In this research, a novel system named distributed-Multiple Tuned Facade Damping (d-MTFD) system is proposed by using specially designed parallel moveable Double-Skin Facade (DSF) outer skin as damping mass. These moveable facade elements can be installed on the upper stories of the high-rise building. Smooth-running guide rail systems are used to achieve the parallel moveability. Multi-objective optimization based on the Genetic Algorithm (GA) is applied to reduce the maximum top floor acceleration (Objective I) and to reduce the maximum facade relative displacement (Objective II) simultaneously. The optimization results for the passive and semi-active systems are presented in the form of the Pareto front. The trade-off between these selected two competing optimization objectives is observed. This approach was first validated in a simulation using a 306 m tall reference building for a wind speed of 13.5 m/s at 10 m above ground level with a return period of 10 years. Acceptable peak accelerations at the top story for hotel use and a maximum facade relative displacement of less than ±0.5 m could be achieved for the benchmark building with the d-MTFD system. For semi-active control, the variable damping coefficient can be achieved by using stepper motors in generator mode. The electrical damping coefficient can be continuously adjusted by the developed power electronics. In addition, electrical energy can be generated and stored in a battery. A full-scale prototype with one parallel moveable facade element was built. Based on the prototype, the functionality of the semi-active control using a stepper motor and its energy harvesting performance was tested by applying Hardware-in-the-Loop (HiL) simulations. Greybox system identification was used to estimate some parameters (spring stiffness, friction, etc.) in the connection. The accurate system identification results ensure further validation using HiL simulations. The HiL simulations successfully demonstrated the feasibility of a self-powered semi-active d-MTFD system.}, subject = {Energy harvesting; Energiegewinnung; Distributed-Multiple Tuned Facade Damping system; d-MTFD; Hardware-in-the-Loop simulation; HiL; System identification; Systemidentifikation; Semi-active vibration control; Semi-aktive Schwingungskontrolle; Hochhaus; Schlankes Bauwerk; Doppelte Fassade; Schwingungsd{\"a}mpfung; Windlast; Mehrkriterielle Optimierung; Hardware-in-the-loop; Genetischer Algorithmus; Energieerzeugung; Prototyp}, language = {en} }