Filtern
Erscheinungsjahr
- 2017 (126) (entfernen)
Dokumenttyp
- Vortrag (126) (entfernen)
Referierte Publikation
- nein (126)
Schlagworte
- Nanoparticles (14)
- Fluorescence (8)
- Nanoparticle (8)
- NIR (7)
- Upconversion (7)
- Integrating sphere spectroscopy (6)
- Quantum yield (6)
- Biofilms (4)
- E. coli (4)
- IR (4)
Eingeladener Vortrag
- nein (126)
Nanotechnology at BAM
(2017)
A common method for nanoparticle separation, which was introduced in 1976 by Giddings, represents asymmetrical field-flow fractionation (AF4). It is a flow based separation method, which can be theoretically used to separate particles range from 1 nm to 50 µm. However, when the particles are smaller than 10 nm, separation with AF4 will become difficult to perform. Because in this case strong separation force, which induces aggregation of particles, should be applied. This will decrease recoveries of analytes and limit its application in accurate quantitative analysis. Capillary electrophoresis (CE) is another well-developed separation technique, in which samples will be separated in relation to their electrophoretic mobility. In recent years, CE has been used to separate different kinds of nanoparticles like, gold colloids or CdSe Quantum dots. However, till now only separation of particles smaller than 50 nm was reported. Because large size distribution of bigger particles will result in strong peak broadening and long separation time.
A two-dimensional coupling of AF4 and CE might provide us a new separation method, which can extend the separation ranges of both methods and be a way to characterise particles with large size distributions.
Discotic liquid crystals (DLCs) are a promising class of soft matter for electronic applications. This is due to their ability to organize and stack themselves into columns in a hexagonal columnar mesophase, driven by the overlapping of the π orbitals of their aromatic core. This leads to a high charge-carrier mobility along the column axis. Previous studies on DLCs showed that their properties, such as phase transition temperatures and enthalpies, are susceptible to nanoconfinement. In this study, 2,3,6,7,10,11 hexakis[hexyloxy] triphenylene (HAT6), a triphenylene based DLC, was confined into parallel aligned cylindrical nanopores of anodic aluminum oxide (AAO) membranes by melt infiltration in the isotropic phase under an argon atmosphere. Furthermore, the pore surfaces of a series of membranes were chemically modified, resulting in a more hydrophobic pore surface than the unmodified ones. The structure, dynamics, and the phase behavior of HAT6 confined into modified and unmodfied nanopores of AAO were investigated by broadband dielectric spectroscopy and differential scanning calorimetry. Results will be discussed in detail.
Discotic liquid crystals (DLCs) are a promising class of soft matter for electronic applications. This is due to their ability to organize and stack themselves into columns in a hexagonal columnar mesophase, a mesophase in between the plastic crystalline and isotropic phase, driven by the overlap of the π orbitals of their aromatic core. This leads to a high charge-carrier mobility along the column axis. Further, these columns could then be considered as “molecular nanowires”.
Spatial confinement of soft matter in nanoporous media influences its structure, thermodynamic properties, and mobility. Embedding liquid crystals and polymers into nanopores of anodic aluminum oxide (AAO) results in a 2D nanoconfinement of these materials. This confinement affects their properties, compared to the bulk, such as phase transition temperatures and enthalpies, molecular mobility, and architecture of the crystallization.
In this study, 2,3,6,7,10,11 hexakis[hexyloxy] triphenylene (HAT6), a triphenylene-based DLC, was confined into nanoporous AAO membranes. The structure, dynamics and the phase behavior of the confined HAT6 were investigated by broadband dielectric spectroscopy (BDS) and differential scanning calorimetry (DSC). HAT6 was embedded into nanoporous AAO membranes by melt infiltration in the isotropic phase under argon atmosphere. The membranes have parallel aligned cylindrical nanopores, with different pore diameters in the range of 10-180 nm. Bulk HAT6 forms a hexagonal columnar phase; in between the isotropic phase above 371 K and the plastic crystalline phase below 340 K. Unlike the bulk, the confined HAT6 split the phase transitions in two or more, which might be interpret as different phase structures; close to the wall and at the pore center. Moreover, the phase transitions of the confined HAT6 shifted, with decreasing pore diameter, to lower temperatures. The dependencies of the phase transition temperatures on the pore size was well-described by the Landau-de Gennes model. Furthermore, pore surfaces of a series of membranes were chemically modified, resulting in a more hydrophobic pore surface than the unmodified ones. HAT6 was embedded into the modified membranes by the same aforementioned preparation. The influence of the changed host-guest-interaction, on the structure, dynamics, and the phase behavior of HAT6 confined in the modified membranes, was also investigated by BDS and DSC.
In this study, the molecular dynamics of two linear-shaped tetramethylated guanidinium triflates ionic liquid crystals were investigated by a combination of Broadband Dielectric Spectroscopy (BDS) and Specific Heat Spectroscopy (SHS). Three processes were detected by BDS; at low temperature γ-process, at higher temperatures α-process and at even higher temperatures conductivity. The γ-process indicates localized fluctuations, and the α-process designates cooperative fluctuations. Slightly different restrictions were found for conductivity processes of LC536 and LC537 due to the slightly different lengths of alky chains. Furthermore, the cooperative dynamics were also probed by SHS. The cooperative dynamics probed by the different techniques (BDS and SHS) compared, and assigned to the different restrictions on the cooperativity due to the difference in the sensitivity of the techniques.
Trends in fluorometry and fluorescence imaging are increasing applications of molecular and nanoscale reporters with emission > 800 nm and recently also > 1000 nm for bioanalysis, medical diagnostics, bioimaging, and safety barcodes. Mandatory for the comparison of different emitter classes and the rational design of the next generation of reporters for the short wavelength infrared (SWIR) region are reliable and quantitative photoluminescence measurements in this challenging wavelength region. This is of special relevance for nanocrystalline emitters like semiconductor quantum dots and rods as well as lanthanide-based upconversion and downconversion nanocrystals, where surface states and the accessibility of emissive states by quenchers largely control accomplishable photoluminescence quantum yields and hence, signal sizes and detection sensitivities from the reporter side. Such measurements are currently hampered by the lack of suitable methods and standards for instrument calibration and validation and quantum yield standards with emission > 800 nm and especially > 1000 nm.
In this respect, we present the design of integrating sphere setups for absolute and excitation power density-dependent measurements of emission spectra and photoluminescence quantum yields in the wavelength region of 650 to 1650 nm including calibration strategies and first candidates for potential fluorescence standards. Subsequently, selected examples for spectroscopic studies of different types of nanocrystals are presented including the upconversion and downconversion emission of differently sized and surface functionalized lanthanide-doped nanoparticles
The direct measure for the conversion efficiency of absorbed photons into emitted light by an emissive species or chromophore is the photoluminescence quantum yield (pl).1 pl is the fluorometric key quantity that controls the suitability of a molecule or material e.g. for application as a label, probe or sensor molecule or as a converter material. A straightforward approach to pl values presents their absolute determination using an integrating sphere set up. This procedure circumvents the use of standards thereby avoiding additional measurements and uncertainties related to their often debated pl values. In this respect, we discuss the experimental requirements on absolute measurements of down and upconversion quantum yields (UC), the later presents currently one of the most challenging spectroscopic measurements due to its multiphotonic character. We explore the challenges for determination of excitation power density (P) dependent pl(P), present the design and characterization of a unique integrating sphere setup for such measurements in the vis to IR spectral region including its calibration, and the influence of the excitation beam profile to perform pl measurements of liquid and solid materials.
As an example for downshifting materials we present doped core-shell CdSe/ZnS semiconductor quantum dots (d-dots) which show a nearly host material and crystal size independent emission with large Stokes shifts and minimum reabsorption.2 Systematic variation of the reaction components, parameters and thickness of the ZnS shell yielded doped nanocrystals with a very high pl, high reproducibility and large quantities. Application of these NCs in the light conversion layers of commercial monocrystalline silicon (mono-Si) solar cells led to a significant enhancement of the external quantum efficiency (EQE) of this devices in the ultraviolet spectral region between 300 and 400 nm. On the other hand, lanthanide-doped up-converting nanoparticles (UCNPs), are promising light converters from the near infrared to the visible region. These NPs show multiple narrow emission bands in the visible (vis) and NIR, excellent photostability, and long luminescence lifetimes. The rational design of brighter UCNP requires an improved understanding of the radiationless deactivation pathways, that are affected by size, surface chemistry, and microenvironment.3 We give an insight into the influences of these parameters on the photophysical key characteristics of the upconversion process such as UC(P), the luminescence decay behavior, the power dependent red-to-green intensity ratio, and intensities of the individual emission bands.
Niobium-titanium carbide cermets with nickel binder have been prepared by colloidal processing in water without a milling step by using Poly-diallyl-dimethyl-ammonium chloride (Poly-DADMAC) as a dispersant. Homogeneous microstructures with relative densities larger than 99% of the theoretical density have been achieved by gas pressure sintering in argon atmosphere. However, mechanical properties like hardness and strength were slightly decreased due to precipitation of free carbon.
A study on metal sulphides in tribofilms of modelled brake wear debris under variable humidity
(2017)
Metal sulphides are needed in brake pad formulations in addition to graphite to compensate the influence of different environments. The sensitivity to humidity differs a lot for each single constituent. Only one component is not sufficient for stabilising the COF and it is also necessary to add more components than only one metal sulphide to graphite. Furthermore, a good mixing process inside the third body during braking is necessary to prevent formation of solid lubricant films which are detrimental for braking. Nevertheless, not every metal sulphide acts as a solid lubricant but most of them have the ability for stabilizing the friction coefficient.
A bottom-up approach to study metal sulphides in brake friction materials at higher temperatures
(2017)
The impact of metal sulphides in brake friction materials on the friction behaviour of disc brakes was studied at two different temperatures and in two different atmospheres using a pin-on-disc device with powder supply. Powder mixtures were prepared by using a bottom-up approach, where magnetite is the main component, in which different metal sulphides are mixed in. At 400 °C, the resulting coefficients of friction are higher in air than in nitrogen atmosphere, which can be attributed to the generation of metal oxides and were confirmed by doing thermal analysis.
The presentation is #4 of the lecture series within the CE5390 NDT&E Course at the “University of Texas at El Paso”, USA (UTEP):
1. Application of NDT to Transportation Infrastructure
2. Application of NDT to Pavements
3. Application of NDT to Tunnels
4. Application of NDT to Nuclear Structures
5. Ultrasonic Methods
6. Electrical Resistivity (ER)
7. Galvanostatic Pulse Measurement (GPM)
8. Half-Cell Potential (HCP)
9. Ground Penetrating Radar (GPR) to Infrastructure
10. Ground Penetrating Radar (GPR) to Pavements
11. Impact Echo (IE)/Ultrasonic Surface Waves (USW)
12. Infrared Thermography (IR)
13. Magnetic Flux Leakage (MFL)
14. Ultrasonic Tomography (UST)
15. Falling Weight Deflectometer/Light Weight Deflectometer
16. Spectral Analysis of Surface Wave
17. Traffic Speed Deflectometer
18. Integrity of Foundations
19. Integration of Technologies
Applications of NDT for nuclear structures are presented with an overview over the special challenges for NDE in this area.
The lecture was held as a webinar on August 29, 2017
Here, we report on the recent advancements in the synthesis and optical properties of novel core-shell CdSe semiconductor nanocrystals (SCNC) with either a thick monolithic shell of CdS or thin multi-shells of succeeding CdS and ZnS monolayers, characterized by steady state and time-resolved fluorescence spectroscopy at the ensemble level. SCNC samples, chosen upon the size of their photoluminescence quantum yield (PL QY), were subsequently investigated at the single particle level using a custom build confocal laser scanning microscope to obtain information on brightness, blinking behavior, and decay kinetics of single SCNCs and correlate these properties with their surface morphology. The results of this study can help to identify new synthetic routes and surface modifications to colloidally and photochemically stable SCNCs with a PL QY of close to unity.
Using metal tagged antibodies for multiplex immunoassays is an important aspect in the research field of bioanalytics. Various tagging strategies have been published, however the formed antibody conjugates were described only rudimentarily. We present an inexpensive, simple and fast DOTA-NHS-ester tagging strategy and the characterization of the conjugates. The monoclonal anti-beta-actin-antibody was used as model system and was modified with the bifunctional ligand DOTA-NHS-ester complexing monoisotopic lanthanide ions. In contrast to the antibody tagging with other tags based on maleimide chemistry the DOTA-NHS-ester reacts with unprotonated amino groups instead of free sulfhydryl groups. The great advantage of this is that a partially reduction of the antibody is not required and therefore the antibody remains intact. The characterization of the conjugates by different analytical techniques demonstrates that no antibody fragments are formed. A mean tagging degree of 8 tags/antibody was determined. The applicability of this tagging strategy is shown in first results of an Alzheimer’s disease study in a mouse model. We have chosen three different NHS-DOTA-ester tagged antibodies for multielement LA-ICP-MS based bioimaging of mice brain tissue. The artificial introduced lanthanides as well as naturally occurring elements were analyzed simultaneously and differences between transgenic and wild-type animals are presented.
One of the most significant limitations for the quantum efficiency of group III-nitride based light emitters is the spatial electron-hole separation due to the quantum-confined Stark effect (QCSE). To overcome this problem, Hönig et al. [1] proposed a novel concept, the Internal-Field-Guarded-Active-Region Design (IFGARD), which suppresses the QCSE for wurtzite crystals in the [0001] direction. Here, we show how encapsulating the active region by additional guard layers results in a strong reduction of the built-in electric field in c-plane wurtzite nanostructures. Even more importantly, we demonstrate the first experimental evidence for the successful realization of an IFGARD structure based on GaN/AlN heterostructures embedded in GaN nanowires. By means of power-dependent and time-resolved µ-photoluminescence (µ-PL) we experimentally proof the validity of the unconventional IFGARD structure. We managed to tune the emission of 4-nm-thick GaN nano-discs up to 3.32 eV at low excitation powers, which is just 150 meV below the bulk GaN bandgap. Our results demonstrate an almost complete elimination of the QCSE in comparison to conventional structures which show approximately 1 eV red-shifted emission. The suppression of the QCSE results in a significant increase of the radiative exciton decay rates by orders of magnitude and demonstrates the potential of IFGARD structures for future light sources based on polar heterostructures.
[1] Hönig et al., Phys. Rev. Applied 7, 024004 (2017)
Sol-gel synthesis was used to prepare nanoparticles of MgF2 and CaF2. These nanoparticles were tested for their application in wood protection. In comparison to control samples, wood specimens treated with MgF2 and CaF2 showed lower mass loss under exposure to termites and fungi. Samples treated with MgF2 performed better at protecting wood from cellulose degradation when exposed to termites. Conversely, in the presence of fungi, mass loss in treated samples was similar irrespective of the chemical composition (MgF2 and CaF2) of the treatment. A possible explanation for this difference in results between termites and fungi could be their different mechanism of cellulose hydrolysis. Thus, future wood preservatives would need to be customized according to their specific application.
The use of duplex stainless steels (DSS) in energy related applications is well known. Nowadays, DSS steels become more favorable than austenitic steels due to the outstanding mechanical properties, the good corrosion resistance and the lower nickel content. However, the use of the duplex grade in acidic environments such as seawater often leads to severe degradation of the structural integrity of the steel by hydrogen-induced/assisted cracking (HAC) phenomena, which can eventually result in premature failure. Hydrogen assisted degradation and cracking of steels are active fields of research even though this topic is intensively studied for more than a century. A bottleneck is the analytical validation of the theoretical models proposed ion the literature at the sub-micron scale.
Industrial and the research communities see a need for an accurate analytical method by which it is possible to image the distribution of hydrogen in the microstructure of a steels or and other alloys. Among the very few available methods hydrogen imaging methods, Time-of-Flight secondary ion mass spectrometry (ToF-SIMS) has the principal capability for mapping of hydrogen in a steel’s microstructure. The combination of ToF-SIMS with multivariate data analysis (MVA), electron microscopy (SEM) and electron-backscattered diffraction (EBSD) is a powerful approach for providing chemical and structural information. The use of data fusion techniques has been shown recently to enhance the better understanding of the hydrogen induced degradation processes in in a DSS steel.
CCQM has established a framework of comparisons to demonstrate the international comparability of chemical measurements. The key point is the establishment of comparable measurements, with traceability to internationally or nationally stated references.
Originally initiated by Dr Martin P Seah, NPL, the Surface Analysis Working Group (SAWG) has been formally founded in 2003. The following terms of reference were presented to CCQM in April 2002. CCQM ratified the group as a full working group of CCQM in April 2003 with these terms of reference:
- to develop pilot studies and carry out key comparisons of national measurement standards for surface and micro/nano-analysis;
- to assist in identifying and establishing inter-laboratory work to improve the traceability of surface and micro/nano-analysis;
- to establish and update a work plan to be adopted by CCQM;
- to discuss and review the scope of the working group and to liase with other working groups related to nanotechnology.
Following the 2016 meeting, the Key Comparison K-129 "Measurement of atomic fractions in Cu(In,Ga)Se2 Films" lead by KRISS and the Key Comparison K-136 on "BET specific surface area of nanoporous Al2O3" lead by UNIIM&BAM have been finished in 2016.
The 15th meeting of SAWG will focus on
- survey on CMC claim submitted with reference to K-129 and K-136.
- the overall and SAWG specific aspects of the CCQM Strategy process,
- a joint meeting with the Inorganic Working Group addressing number concentrations of nano particles,
- discussion of future comparisons.
Graphene is a two-dimensional carbon network with unique properties, including high mechanical stiffness, strength, and elasticity, outstanding electrical and thermal conductivity, and many others. Despite these advantages, its low solubility, poor reactivity and the limited accessibility of a well-defined basal plane are major challenges for applications. An ideal method to overcome these problems is the covalent attachment of functional molecules to its surface which enables further reactive modifications for specific applications. There is a number of different technologies for surface functionalization of graphene and related CNT materials. However, to get control on the functionalization process and to optimize the performance of the modified surfaces analytical tools for surface chemical characterization are required. X-ray absorption (NEXAFS) and photoelectron spectroscopy (XPS) have been identified to be rather powerful here. Specifically NEXAFS spectroscopy underpinned by quantum chemical spectrum simulations is unique in a way to address changes of aromaticity and defect formation at the graphene surface during functionalization.
For relevant surface modification technologies, we present examples on how NEXAFS and XPS can perform well. All presented modifications aim on the production of platforms for defined functional 2D nanomaterials, as for example multifunctional hybrid architectures. In detail, we investigated:
• Graphene and carbon nanotube functionalized by a Vacuum-Ultraviolet (VUV) induced photochemical process in NH3 or O2 atmospheres in order to introduce amino or hydroxy functionalities, respectively.
• Br bonding on r.f. cw low pressure plasma brominated graphite surfaces by using Br2 and bromoform as plasma gases.
• A wet chemical method for covalent functionalization of graphene sheets by a one-pot nitrene [2+1] cycloaddition reaction under mild conditions. Here a reaction between 2,4,6-trichloro-1,3,5-triazine and sodium azide with thermally reduced graphene oxide (TRGO) results in defined dichlorotriazine-functionalized graphene sheets.
An extraction of silica from natural sands of Bancar has been conducted by means of alkali fusion route using NaOH and mechanical alloying using planetary ball milling. The PANI/SiO2 Composite system has been coated in steel surfaces using spraying method. This study was designed to obtain PANI/SiO2 as an anti-corrosion coating material. The filler materials in the composite System consist of micro- and nano-SiO2. The structure of synthesized SiO2 be characterized using XRD and TEM. Corrosion of PANI/SiO2 composite has been tested using immersion method in synthetic geothermal atmosphere (Nord Deutsche Becken/NDB solution). The surface morphology after corrosion was observed by using SEM/EDX. XRD-Patterns and TEM show that the size of produced SiO2 is micro and nano. The size and composition of filler have influenced to surface degradation in geothermal atmosphere significantly. The addition of nano-SiO2 in the PANI matrix influenced corrosion resistance better than micro-SiO2 filler qualitatively. The nano-SiO2 has a high potential as an anti-corrosion material in geothermal atmosphere. The product of corrosion is mainly Fe2O3 and the corrosion process is identified as a pitting corrosion.
The interaction of nanoparticles (NPs) with cells has become a major field of interest, ranging from therapeutic applications to nanotoxicology. The cellular uptake depends on the primary characteristics of the NPs (e.g. size, shape, surface modification) and on the cells interacting with the particles. Thereby the quantification of NPs in cells is of particular importance to obtain information under different experimental conditions. Presently, the number of NPs internalized is often determined by inductively coupled plasma (ICP) optical emission spectrometry (OES) or ICP mass spectrometry (MS) after acid digestion of a cell suspension or a cell pellet. The result is an average value and no information about the distribution among cells or within a cell is available. Therefore we developed a method based on laser ablation (LA) in combination with ICP-MS to localise and quantify metallic NPs in single cells.
LA-ICP-MS is a powerful analytical method which offers excellent sensitivity at high spatial resolution and multielement capability without time-consuming sample preparation steps. Recently, LA-ICP-MS was established for elemental mapping of biological samples like tissues.
In our experiments, fibroblast cells were incubated with gold or silver containing nanoparticles and grown on sterile coverslips under standard conditions. For LA analysis the cells were fixed with formaldehyde and dried. Subcellular resolution is achived by careful optimisation of laser energy, ablation frequency and scan speed. The elemental distribution was determined by continuous ablation line by line of cells incubated with NPs. Our results show that LA-ICP-MS is able to detect NP aggregates within cellular substructures. After 24 h of incubation the NPs were found in the cytosol, preferencially in the perinuclear region, but do not enter the nucleus. Additionally, a quantification strategy at single-cell level was developed. For this purpose nitrocellulose membrane was spiked with Ag or Au nanoparticle suspension at different concentration levels and analysed by LA-ICP-MS. Based on this calibration the number of NPs taken up by individual cells was determined and variations within the cell population become visible. The cells show a strong dependence of NP uptake on concentration and incubation time.
Our results demonstrate the potential of LA-ICP-MS providing insight into NP uptake and intracellular distribution dependent on experimental parameters.
Studying the interaction of nanoparticles (NPs) with cells has become a growing field of interest. Research topics are ranging from nanotoxicology to medical applications e.g. as theranostic agents. In order to evaluate nano-bio interactions, the number of NPs inside cells as well as their localisation within cellular substructures is of particular interest.
In recent years, elemental imaging of biological samples using laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) is gaining more and more importance. Latest instrumental developments regarding spatial resolution (down to 1 µm) and detection efficiency make LA ICP-MS particularly interesting for single cell analysis.
Here, we have applied LA-ICP-MS for sub-cellular scale imaging of individual cells to study the NP pathway from uptake, via intracellular processing up to cell division. Furthermore, the local distribution of naturally occurring elements in cells like P was measured to indicate the cell morphology.
Murine fibroblast cells were incubated with different metal-containing NPs under varying experimental conditions. For LA analysis, the cells were fixed and dried. Sub-cellular resolution was achieved by careful optimisation of the laser ablation parameters. By rastering with the laser beam across the sample, a two-dimensional image of the elemental distribution can be received. Our results show that LA-ICP-MS is able to localise NP aggregates within cellular substructures. The studied NPs accumulate in the perinuclear region in the course of intracellular processing, e.g. multivesicular fusion and endosomal maturation, but do not enter the nucleus. The uptake depends on the physico-chemical properties of the nanostructures and on the incubation conditions like concentration and incubation time. Additionally, the number of NPs internalized by individual cells was determined and variations within a cell population became visible.
The findings demonstrate the potential of LA-ICP-MS providing insight into NP uptake and intracellular distribution dependent on experimental parameters.
SAXS for the determination of the size distribution of nanoparticles: Application in catalysis
(2017)
The open source software packages SASfit1 and McSAS2 are widely used to determine the size distribution of nanoparticles. SASfit is based on classical curve fitting. The type of size distribution needs to be provided as constraint for analysis. Very often the lognormal size distribution is useful as shown for the characterization of single- and multimodal magnetic iron oxide particles. The use of SASfit is part of efforts to standardize analyzing methods for magnetic nanoparticles within the EU project NanoMag (www.nanomag-project.eu). In contrast to SASfit, it is not necessary to provide the type of size distribution when using the program McSAS. Both programs provide tools that allow the user to estimate uncertainties of the derived size distributions. Such is helpful in the development of nanoscale reference materials for environmental, health and safety measurements. As an example, a detailed study on using SAXS in the characterization of ultra-small-silver nanoparticles is presented. These particles are useful in the catalytic reduction of 4-nitrophenol and display an adjustable activity (see Figure).
Figure. Core-shell silver nanoparticles catalyze the reduction of 4-nitrophenol and display an increasing catalytic activity when stabilized with different ligands in the line bovine serum albumin (BSA), glutathione (GSH) and polyacrylic acid (PAA).5
The aims of the Research Unit „Acting Principles of Nano-Scaled Matrix Additives for Composite Structures“ (DFG FOR 2021) are based on different synergetic pathways. Challenges are to achieve an improved damage tolerance combined with unchanged processability and a proof of the nano-based effect from molecular scale up to structural level. First of all, a comprehensive understanding of the acting mechanisms of nano-scaled ceramic additives onto polymer matrices of continuous fibre reinforced polymer composites with respect to improved matrix dominated properties is in focus. To proof of the nanoscopic and microscopic effects up to structural level; experimental investigations start on the functional correlation between the particle properties and the resulting properties of the epoxy as suspension and in the solid state. This includes tests for the resulting composite structures as well. Along the entire process chain different multi-scale simulations are performed from molecular modelling up to the macroscopic, structural level. The combination of experimental investigations and simulation methods enables a holistic understanding of the acting principles and basic mechanisms.
Specialized techniques based on Scanning Force Microscopy are the basis of our analysis of physicochemical properties of the boehmite nanoparticles and their polymer environment. A surface map of mechanical properties as an input for simulations facilitate a deeper understanding of such composites across all scales. This enables us to understand the macroscopic structure-property relationship and to predict failure mechanisms as well as routes for optimization.
Characterization of bio-molecular nano-layers by means of reference-free X-ray Spectrometry
An increasing field of application, e.g. in biotechnology is the dedicated adjustment of surface properties by functionalization with organic molecules. For a detailed understanding and further development of such nano-layers, a quantitative determination of the surface density of molecular species is required.
By means of reference-free X-Ray Fluorescence (XRF) spectrometry such surfaces can be analyzed quantitatively by detecting specific marker elements. Using calibrated instrumentation and a quantification approach based on atomic fundamental parameters a SI-traceable quantitative analysis without any calibration sample or reference material is possible. A chemical analysis of molecular bonds can be accomplished by X-Ray Absorption Spectroscopy in the Near-Edge region (NEXAFS). Especially in the soft X-ray range an access to relevant light elements like Carbon C, Nitrogen N and Oxygen is possible.
Here, aminated surfaces with varying densities of amino groups prepared from binary mixtures of silanes were investigated. In a complementary analysis by X-Ray Photoelectron Spectroscopy (XPS) and Fluorescence measurements based on laser-excitation in the optical light spectrum the functional-group density of silane monolayers were determined. The nitrogen atom in the head-group of the silane-molecule could be used as specific marker for the reference-free quantitative XRF analysis and were used for traceable calibration of XPS and Fluorescence Spectroscopy.
Improved wear resistant ceramics of metal incorporated NbC processed with gas pressure sintering
(2017)
Tungsten carbide (WC) dominates wear protection and machining since more than 90 years due to its hardness with an associated good toughness and high melting point.
It was recently demonstrated that Niobium Carbides are wear resistant and show a better performing under cutting than WC grades. In order to profit of the good properties of Niobium Carbide, specific processing techniques need to be developed. The density of NbC is half of WC and offers colloidal processing for perfectly mixing NbC with metallic binder (up to 15 vol.-% Ni) and secondary carbide-particles. The used NbC-powder has an average particle size d50 of 3 micron measured by laser granulometry analysis. The true density was 7.68 g/cm3. An Oxygen content of the used NbC of 0.4 % is caused by residual slag content.
It is possible to increase the stability of the NbC-suspensions and to reduce their viscosity by adding a specific dispersing agent.
This surface-modified NbC powders (containing Ni)were uniaxially pressed and then gas pressure sintered in vacuum or Argon atmosphere. All samples reached more then 98 % of there theoretical density. The micrographs showed a homogenius distribution of the Ni-binder in the product. The tribological behaviour under dry sliding and oscillating up to 600 °C and the mechanical properties were studied.
Polymer-based nanocomposites attracted recently a lot of attention from both the applicative and fundamental point of research. While the former point of view is due to the properties improvement compared to the corresponding matrix polymers the latter aspect is related to interaction of polymers with solid surfaces and confinement effects.
Here, nanocomposites based on poly(L-lactide) (PLA), which is a semi-crystalline polymer, and organically modified Layered Double Hydroxides (LDH) were prepared by melt blending, and investigated by a combination of Differential Scanning Calorimetry (DSC), Small- and Wide-Angle X-ray Scattering (SAXS, WAXS), and dielectric spectroscopy (BDS). Two different LDH materials were considered, which results in different morphologies of the nanocomposites. The influence of these different morphologies on the properties of the nanocomposites especially on the molecular mobility is discussed in detail.
In general the structure of semi-crystalline polymers has to be described by a three phase model, consisting of a mobile amorphous (MAF), a crystalline (CF), and a rigid amorphous fraction (RAF). For nanocomposites based on semi-crystalline polymers the RAF is due to both the crystallites (RAFcrystal) and the filler (RAFfiller). The considered nanocomposites were further investigated by hyper and temperature modulated differential scanning calorimetry. For the first time the different phase fractions CF, MAF, RAFcrystal, and RAFfiller could be estimated independently from each other.
Semicrystalline polymers have to be described by a three phase model consisting of a mobile amorphous (MAF), a crystalline (CF), and a rigid amorphous fraction (RAF). For nanocomposites based on a semicrystalline polymer the RAF is due to both the crystallites (RAFcrystal) and the filler (RAFfiller). In most cases a separation of both contributions is not possible without further assumptions. Polymer nanocomposite based on poly(L-lactide) and MgAl layered double hydroxide nanofiller were prepared. Due to the low crystallization rate of PLA its crystallization can be suppressed by a high enough cooling rate, and the RAF is due only to the nanofiller. The MAF, CF, and RAF were estimated by Temperature Modulated DSC. For the first time CF, MAF, RAFcrystal, and RAFfiller could be estimated. It was found, that RAFfiller increases linearly with the concentration of the nanofiller. Furthermore, RAFcrystal is only slightly influenced by the presence of the nanofiller.
Different types of polymerbased nanocomposites (matrix materials: polyethylene, polypropylene, polylactide, polycarbonate, polystyrene) with a broad variety of nanofillers (fillers: layered silica, layered doubled hydroxides, POSS) are prepared where the concentration of the particles is varied. For layered fillers TEM images show both an intercalated and exfoliated morphology in dependence on the nanofiller and the matrix. All systems are studied in detail by dielectric spectroscopy (BDS) but also complementary methods like WAXS, SAXS, gas transport measurements, calorimetry, and FTIR spectroscopy are employed. Besides the dispersion, the interfacial region between the nanoparticles and the polymer matrix is crucial for the properties of the nanocomposites. Therefore, attention is paid to investigate this interfacial area by BDS because the polar groups of both the surfactant and compatibilizer are located close to the layers. For some systems it is found that the molecular mobility in the interfacial area is essentially higher than in the matrix. In addition a Maxwell/Wagner/Sillars polarization is found due to the blocking of charges at the layers. The time constant of this MWS-process can be correlated with characteristic length scales in the nanocomposites and provides information about the dispersion of the nanofiller.
Discotic liquid crystals (DLCs) are self-assembled materials where self-assembly is driven by non-covalent intermolecular interactions. The corresponding molecules consist of a flat and rigid aromatic core substituted by flexible aliphatic side chains. While the former is responsible for the π-stacking, the latter gives rise to an increased solubility, processability, and rich thermotropic behavior. The disc-shaped molecules form columns that further assemble into two-dimensional arrays with a hexagonal mesophase. The alkyl chains fill the intracolumnar space giving rise to a nanophase separated state. These soft matter materials with highly ordered columnar structures have a great potential in molecular electronic devices such as active semiconductors in organic field-effect transistors and photovoltaic devices with a charge carrier mobility of up to 1.1 cm2/Vs. Two different homologous systems based on triphenylene derivatives were investigated as model systems for DLCs where the length of the aliphatic side chains is widely varied. Structural information is retrieved by X-ray diffraction carried out on a synchrotron. Experiments were carried out in the bulk state and confined to the nanometer wide channels of anodic aluminum membranes (Pore diameter 20 nm, 40nm, 80 nm and 180 nm). The latter case can be considered as a promising way to prepare nanowires. As method broadband dielectric spectroscopy (frequency range 10-2 Hz to 109 Hz) is employed. These experiments were accompanied by thermal investigations (Differential Scanning Calorimetry as well as Thermogravimetric Analysis) as well as inelastic neutron scattering (neutron Time-of-Flight and neutron Backscattering). The dynamics of these unique soft matter materials are discussed in detail considering their structure (length of the aliphatic side chain), the effect of self-confinement (of the aliphatic chains in the intracolumnar space) and of the outer confinement (influence of the pore size). Comparison is further made to a pyrene based system.
In the course of miniaturizing modern technology down to the molecular scale, understanding the materials behavior has to be investigated and deviations from the bulk have to be understood. A combination of nano-sized relaxation spectroscopies (Broadband Dielectric Spectroscopy (BDS) and Specific Heat Spectroscopy (SHS)) employing AC nanochip calorimetry were utilized to investigate the glassy dynamics of ultra-thin films of blends of Poly (vinyl methyl ether) (PVME) / Polystyrene (PS) (50:50 and 25/75 wt-%), which are miscible in the bulk (thicknesses: 8nm - 200nm, film thickness was controlled by ellipsometry, film topography by AFM). Both methods are sensitive to different probes; where SHS senses entropy fluctuations BDS measures dipole fluctuations. For BDS measurements, a recently developed nano-structured electrode sample arrangement is employed. By measuring the dynamic glass transition in dependence of the film thickness, SHS showed that the Tg of the whole film was strongly influenced by a nanometer-thick surface layer at the polymer/air interface due to a self-assembling process. Compared to the SHS results the BDS measurements show a completely different behavior. At high temperatures the temperature dependence of the relaxation times of the films follows that of bulk-like PS/PVME obeying the VFT-law. With decreasing temperature the temperature dependence deviates from the VFT to an Arrhenius law where the apparent activation energy decreases with decreasing film thickness. This is the first example were confinement induced changes were observed by BDS for ultra-thin films. All results were analyzed in detail in a comprehensive discussion.
The molecular dynamics of the discotic liquid crystals like pyrene-1,3,6,8-tetracarboxylic tetra(2-ethylhexyl) ester is studied by dielectric relaxation spectroscopy. Dielectric spectroscopy shows 3 processes: a b-relaxation at low temperatures and an a-relaxation in the temperature range of the mesophases followed by conductivity. The dielectric a-relaxation is assigned to a restricted glassy dynamics in the plastic crystal as well as in the liquid crystalline phase.
Sensing of intracellular pH is of particular interest in biomedical research since structure and function of biomolecules strongly depend on the concentration of protons in their environment. We have functionalized photon upconversion nano-particles (UCNPs) with pH responsive dyes to achieve nanoprobes for intracellular pH determination. The sensing mechanism is based on a resonance energy transfer (UC-RET) from the 550 nm emission of hexagonal nanocrystals of NaYF4: Yb3+,Er3+ to the pH-sensitive fluorophore pHrodoTM Red. The nanocrystals were coated with thin shells of aminosilane or highly branched polyethylenimine (PEI) with several nanometer layer thickness for coupling of the pH indicator.
The nanoprobes are calibrated by ratiometric dual wavelength readout at 550 nm (reference signal) and 590 nm (sensor signal) and visualized using a scanning confocal fluorescence microscope with 980 nm excitation wavelength. It was found that PEI coating enables a higher coupling of indicator molecules on the particle surface, better signal to reference ratios in ratiometric readout and an improved cellular uptake compared to the aminosilane coated particles due to a more positive zeta potential. We studied the cellular uptake efficacy of the nanoprobes and determined to which type of compartment, lysosomes, endosomes or cytosol, the probes are targeted to by measuring the pH of their microenvironment. An in situ control was performed in live cells by a treatment with nigericin, whereby the pH of all intracellular compartments is set at extracellular level.
Finally, we will show new strategies for the preparation of UCNP-dye conjugates with improved UC-RET efficiency to achieve higher acceptor (sensor) emission.
Most microorganisms live in environments where nutrients are limited and fluctuate over time. Cells respond to nutrient fluctuations by sensing and adapting their physiological state. Recent studies suggest phenotypic heterogeneity in isogenic populations as an alternative strategy in fluctuating environments, where a subpopulation of cells express a function that allows growth under conditions that might arise in the future. It is unknown how environmental factors such as nutrient limitation shape phenotypic heterogeneity in metabolism and whether this allows cells to respond to nutrient fluctuations. Here, we show that substrate limitation increases phenotypic heterogeneity in metabolism, and this heterogeneity allows cells to cope with substrate fluctuations. We subjected the N2-fixing bacterium Klebsiella oxytoca to different levels of substrate limitation and substrate shifts, and obtained time-resolved single-cell measurements of metabolic activities using nanometre-scale secondary ion mass spectrometry (NanoSIMS). We found that the level of NH4+ limitation shapes phenotypic heterogeneity in N2 fixation. In turn, the N2 fixation rate of single cells during NH4+ limitation correlates positively with their growth rate after a shift to NH4+ depletion, experimentally demonstrating the benefit of heterogeneity. The results indicate that phenotypic heterogeneity is a general solution to two important ecological challenges - nutrient limitation and fluctuations - that many microorganisms face. Currently, we use NanoSIMS to develop a new approach that defines functionally-relevant, phenotypic biodiversity in microbial systems. In the last part of my presentation, I will highlight why the concept of phenotypic diversity is relevant for the understanding of antimicrobial resistance.
Question: Most microorganisms live in environments where nutrients are limited and fluctuate over time. Cells respond to nutrient fluctuations by sensing and adapting their physiological state. Recent studies suggest phenotypic heterogeneity in isogenic populations as an alternative strategy in fluctuating environments, where a subpopulation of cells express a function that allows growth under conditions that might arise in the future. It is unknown how environmental factors such as nutrient limitation shape phenotypic heterogeneity in metabolism and whether this allows cells to respond to nutrient fluctuations.
Methods: We subjected the N2-fixing bacterium Klebsiella oxytoca to different levels of substrate limitation and substrate shifts, and obtained time-resolved single-cell measurements of metabolic activities using nanometre-scale secondary ion mass spectrometry (NanoSIMS).
Results: We show that substrate limitation increases phenotypic heterogeneity in metabolism, and this
heterogeneity allows cells to cope with substrate fluctuations [1]. We found that the level of NH4+ limitation shapes phenotypic heterogeneity in N2 fixation. In turn, the N2 fixation rate of single cells during NH4+ limitation correlates positively with their growth rate after a shift to NH4+ depletion, experimentally demonstrating the benefit of heterogeneity.
Conclusion: The results indicate that phenotypic heterogeneity is a general solution to two important ecological challenges—nutrient limitation and fluctuations—that many microorganisms face. Currently, we use NanoSIMS to develop a new approach that defines functionally-relevant, phenotypic biodiversity in microbial systems.
The Short Course “Immunoanalytical Methods for Environmental, Food and Clinical Analysis” offers training in antibody-based analytical techniques. The course is suitable also for beginners. The Short Course comprises Lecture Units teaching the concepts, equipment, reagents and explains the protocols to be used in the practical part. Simple “Hands On” units are offered employing portable instrumentation. – The Short Course spans from antigen production, generation of antibodies, assay development and optimization, data evaluation to the different formats that have been developed. Examples are provided from the areas of environmental analysis (pharmaceuticals, hormones and anthropogenic markers in water and wastewater), food analysis (caffeine in beverages, mycotoxins) and clinical diagnostics (infarction biomarkers). The attendants will be enabled to select an appropriate method and to judge its applicability for their given analytical problem.
The presentation deals with the progess, the use of beads brings with it when developing and using immunoanalytical methods. While with conventional assays (e.g. ELISA) fill/empty/wash steps have to be performed within the same microplate well, antibodies on beads bring the possibility of incubating the sample with the capture antibodies in one compartment and then transport it, e.g. in microfluidic channels, to the site of detection. Especially magnetic nanoparticles, that can be captured and released easily, have a wide field of application.
With ongoing innovation in process technology, the challenges of concrete technology are more and more focused on the rheological optimisation for these processes, since improper mixture stability or poor compaction ability negatively affect the concrete homogeneity and quality. However, along with the increasing complexity of today’s concrete mixture compositions, concrete becomes more prone to failure regarding the casting process. Variable properties of the raw materials typically cause changing workability. The reasons can be found among others in scattering water contents, physical or chemical properties of the cement or varying environmental temperatures. Robustness in the delicately adjusted rheology, however, is of utmost importance for modern and future process technology, from sprayed concrete over pumpable concrete towards 3D-printing, with regard to the long-term strength, the function and the durability. Typically, material induced changes cannot be identified easily due to the complex interactions of concrete constituents. Therefore, a precise and prompt counteraction is impossible. However, it is known that the yield stress can be controlled by addition of supplementary superplasticizer or stabilising agent. In combination with computerized process observation tools that can rapidly interpret and react on changes in the rheology, it is therefore thinkable, that only these two admixture types can adjust the rheology steadily and permanently, regardless of the actual root cause for observed macroscopic rheology change. The presentation will firstly give a comprehensive overview of effects at the interface between pore solution, particles and hydrates, which affect the rheology of fresh concrete. Secondly, ways are recommended how the rheology can be actively manipulated before eventually computerized methods are demonstrated that help to actively and rapidly assess and counteract performance scatter during steady casting processes.
Chemical admixtures like superplasticisers or stabilising agents are of ever increasing importance for modern concrete technology. They liberate the workability of concrete from its dependency on water content, and thus, open the gate towards innovative and future oriented concrete technologies. Meanwhile admixtures have become common practice in concrete technology, but the understanding of these highly complex polymers in the entire concrete system lags far behind their application. Due to its complex time-dependent, multi-phase and multi-scale behaviour, flowable concrete systems are highly complicated and cannot be described comprehensively by simple models. It is therefore extremely challenging to identify the relevant parameters that predominantly control flow phenomena on different size scales, since these may occur on any scale between the nano scale (e.g. superplasticizer adsorption) and macro scale (e.g. grading of the aggregates). The present study discusses fundamental mechanisms at the interface between particle or hydrate surfaces and the fluid phase at a very early stage of concrete formation, and links these effects to macroscopic flow phenomena.
Based on the observations of the nano scale effects, it seems that higher sensitivity against variations in the constituents, the handling, or the boundary condition are the inevitable price for higher performances. However, eventually a very effective method is introduced that helps to maintain stable processes regardless of the root cause for performance changes based on an efficient in-situ process control scheme and superplasticizer and stabilising agents as counter actions.
Metallic organic frameworks are the materials stirring great interest by their large variety of structure types and chemical composition as well as low density and very high surface area, which are desirable properties for gas storage such as for hydrogen, methane or carbon dioxide. Using different so called secondary building units offer an opportunity to form tunable structures with channels of various geometry and allow in this way to study the absorption of the molecular hydrogen, methane or carbon dioxid in the systematic way.
Introduction on BAM developments in the project “Microbially Induced Corrosion” (MIC) for new analytical tool, surface modifications and bacterial biofilm developments in the course of the ICBM-Colloquia at the Institut für Chemie und Biologie des Meeres (ICBM) of the Carl-von-Ossietzky-University in Oldenburg.
Presentation of the MIC-project (Microbially Induced Corrosion) within the focus area Materials of the BAM. Strategies, developments and innovations in the area of analytical tools, surface modifications, polymer stability and biofilm-enhanced deteriorations of materials in the context of microbially induced corrosion processes.
Microbially induced corrosion (MIC) is a severe cost and risk factor for the oil and gas industry, water heat- and cooling systems, waste water management, and infrastructural constructions. The industrial preventions management of MIC focuses on eliminating present microorganisms, which leads to the repeated and time-consuming application of biocides. However, biocides are often only minor effective for microorganisms that live protected from these agents in a biofilm matrix formed on material surfaces. In recent years, microbiologist have renewed our vision on the electrochemical processes underlying material corrosion induced by sulfate reducing bacteria, but the knowledge at the level of multispecies biofilm formation and the effects of material’s properties are still rather scarce.
Therefore, an interdisciplinary team of material scientists, chemists and microbiologists, established a MIC-research platform at the Federal Institute for Materials Research and Testing (BAM) to study the effects of material’s properties and biofilm formation on MIC. Using femtosecond laser pulse technology steel surfaces with defined nanostructures were manufactured. The test pieces were incubated using a flow-through chambers setup with different organisms relevant for biofilm studies. Our studies showed, that nanoscale structures severely affect the biofilm thickness and, hence, growth for health threatening organisms like E. coli and S. aureus, but also for MIC-relevant bacteria such as Fe(III)-reducing Shewanella spec.
Another aspect of the biofilm matrix is the establishment of microscale environments with conditions, such as anaerobic or acidic microenvironments, which promotes a diverse multispecies community. However, the detection and visualization of such small-scale microenvironments is rather challenging. Further, it could directly indicate the activity of microorganism influencing or inducing corrosion processes. Therefore, dye-stained nanoscale particles, bearing pH-responsive fluorophores at the surface, were developed to measure the pH at the biofilm’s surface and within the matrix using confocal laser scanning microcopy. The particles will be further advanced to measure other environmentally relevant parameters, including oxygen concentration, and concentrations of selected metal ions indicative of corrosion of e.g., materials used for water pipelines. In the future, our platform and its analytical tools will be employed to study the formation of biofilms in dependency of the respective support material, its surface properties like roughness, and the microbial community.
Molecularly imprinted polymers (MIPs) are an established and powerful matrix for the selective enrichment and separation of chemical species, especially of small organic molecules. Because MIPs contain cavities in their matrix that are complementary in size, shape and electronic/electrostatic or hydrogen bonding demand to the imprinted target molecule or template, they are frequently termed “artificial antibodies”. Compared to natural antibodies, they are chemically and physically much more robust. MIP formation proceeds through the polymerization of a mixture of functional monomers and cross-linkers in the presence of the template with subsequent extraction of the latter. While this strategy has been successfully employed for separation MIPs since decades, the development of sensory MIPs has long been limited to the combination of a MIP as enrichment phase with a separate signalling element in a discontinuous fashion, being unsuitable for many sensing applications. Only very recently, the implementation of specifically designed fluorescent probes into MIPs has been successfully accomplished, fluorescence being one of the most versatile, sensitive and easily miniaturizable techniques. This presentation will introduce basic design considerations, challenges, limitations and the potential that lies with such sensor materials on the background of the work carried out in our group.
Lanthanide-doped up-converting nanoparticles (UCNPs) are promising reporters for medical diagnostics and bioimaging, which are excited in the near infrared (NIR) by multiphoton absorption processes, and show multiple narrow emission bands in the visible (vis) and NIR, long luminescence lifetimes in the μs range, and excellent photostability. Current limitations present their relative low absorption cross sections and low fluorescence efficiencies, with the latter being affected by particle size, surface chemistry, and microenvironment, particularly water.
Here, we present results from systematic studies of the excitation power density dependent upconversion luminescence spectra, intensities/intensity ratios of the individual emission bands, slope factors, and quantum yields of UCNPs of varying size, dopant concentration, and surface chemistry in different microenvironments as well as the up- and downconversion luminescence decay kinetics of the different emission bands. Moreover, first studies of the energy transfer from UCNPs to surface-bound organic dyes acting as fluorescence acceptors are shown. Based upon these measurements, fluorescence deactivation channels are identified and spectroscopic parameters for the screening of material performance are derived.
Lanthanide-doped up-converting nanoparticles (UCNPs) are promising reporters for medical diagnostics and bioimaging. Current limitations present their relative low absorption cross sections and low fluorescence efficiencies, with the latter being affected by particle size, surface chemistry, and microenvironment, particularly water.
Here, we present results from systematic studies of the excitation power density dependent upconversion luminescence spectra, intensities/intensity ratios of the individual emission bands, slope factors, and quantum yields of UCNPs of varying size, dopant concentration, and surface chemistry in different microenvironments as well as the up- and downconversion luminescence decay kinetics of the different emission bands. Moreover, first studies of the energy transfer from UCNPs to surface-bound organic dyes acting as fluorescence acceptors are shown. Based upon these measurements, fluorescence deactivation channels are identified and spectroscopic parameters for the screening of material performance are derived.
Due to their unique physical properties, particularly their electronic and luminescent properties, graphene quantum dots (GQDs) are expected to be suitable for a wide range of applications in bioimaging, electro-optical and photonic materials or energy harvesting among others.1 Tuning the surface chemistry provides an efficient approach to modulate the fluorescence and distinct electronic properties of GQDs.2 Nevertheless, the role of surface chemistry on the electronic structure of GQDs remains poorly understood. In this presentation, we will compare systematically the electronic and chemical structures of GQDs functionalized with carboxylic and aminated groups to those of non-functionalized GQDs, combining theoretical and experimental approaches, here various photon-based spectroscopies. First, the electronic structure of GQDs was characterized by soft X-ray absorption (XA) and X-ray emission (XE) spectroscopies, probing unoccupied and occupied electronic states, respectively, at the carbon K edge for the first time. The interpretation of the XA/XE spectra was done based on theoretical calculations. Then, the chemical structure of the GQDs was characterized in situ by ATR-FTIR in water, thereby accounting for the importance of the interface between GQDs and water believed to play a central role in the chemical reactivity and the optical properties. We previously demonstrated that monitoring the OH vibrations of water molecules during exposure to humid air was a powerful method to probe H-bonding environment around carbon nanomaterials.3 For GQDs, clear surface-dependent water adsorption profiles are observed and discussed. Finally, UV/Vis absorption and photoluminescence measurements were done to characterize the optical properties of these GQDs. Our results suggest that the surface chemistry of the GQDs affects significantly their electronic structure and optical properties. These findings will contribute to an improved understanding of the structure–activity relationship of GQDs and other carbon nanomaterials with surface modifications.
There is an increasing interest in optical reporters like semiconductor and lanthanide-based nanocrystals with emission > 800 nm and recently also > 1000 nm for bioanalysis, medical diagnostics, and safety barcodes. Mandatory for the comparison of different emitter classes and the rational design of the next generation of reporters for the short wavelength infrared (SWIR) region are reliable and quantitative photoluminescence measurements in this challenging wavelength region. This is of special relevance for nanocrystalline emitters like semiconductor quantum dots and rods as well as for upconversion and downconversion nanocrystals, where surface states and the accessibility of emissive states by quenchers largely control accomplishable quantum yields and hence, signal sizes and detection sensitivities from the reporter side. Such measurements are currently hampered by the lack of suitable methods and standards for instrument calibration and validation as well as by the lack of quantum yield standards with emission > 800 nm and especially > 1000 nm.
In this respect, we present the design of integrating sphere setups for absolute and excitation power densitydependent measurements of emission spectra and quantum yields in the wavelength region of 650 to 1650 nm
including calibration strategies and first candidates for potential fluorescence standards. Subsequently, the photoluminescence properties of different types of nanocrystals are presented and discussed including absolute photoluminescence measurements of upconversion and down conversion emission in different solvents.