Filtern
Dokumenttyp
- Vortrag (17)
- Zeitschriftenartikel (4)
- Beitrag zu einem Tagungsband (1)
Sprache
- Englisch (22) (entfernen)
Schlagworte
- Hydrogen (6)
- H2Safety@BAM (5)
- Safety (5)
- Explosion protection (3)
- Wasserstoff (3)
- BLEVE (2)
- Hydrogen safety (2)
- Hydrogen transport in pipelines (2)
- LH2 (2)
- Liquid hydrogen (LH2) (2)
- Mehrphasenströmung (2)
- Sicherer Umgang (2)
- Sicherheit (2)
- Stofftransport (2)
- ATEX (1)
- Battery (1)
- Berufsgenossenschaft (1)
- Biogas (1)
- CNG (1)
- Classification (1)
- Closed vessel combustion (1)
- Coating (1)
- Competence Center (1)
- Consequences (1)
- Cryoegenic storage vessel (1)
- Cryogenic Tank (1)
- Cyro storage tanks (1)
- DELFIN (1)
- Epoxy resin (1)
- Explosion (1)
- Explosion Limits (1)
- Explosion Protection (1)
- Flammability (1)
- Flammable gas (1)
- Flammable liquid (1)
- Gas cylinders (1)
- Glass capillaries (1)
- Graduate School (1)
- Graduiertenkolleg (1)
- Green Deal (1)
- Hazardous areas (1)
- Hollow specimen (1)
- Hydrogen Strategy (1)
- Hydrogen assisted cracking (1)
- Hydrogen infrastructure (1)
- Hydrogen quality (1)
- Hydrogen release (1)
- Hydrogen storage (1)
- Hydrogen strategy (1)
- Hydrogen transport (1)
- Ignition Source (1)
- Ignition source (1)
- Japanese-German energy partnership (1)
- LPG (1)
- Laminar burning velocity (LBV) (1)
- Liquid Hydrogen (1)
- Liquified hydrogen (1)
- Lithium-ion batteries (1)
- Long-term calculation (1)
- Mechanical sparks (1)
- Methane (1)
- Minimum Ignition Energy (1)
- ModuH2Pipe (1)
- NMC Cathode (1)
- Natural gas (1)
- Natural gas mixtures (1)
- Permeability (1)
- Pouch cell (1)
- Power2Gas (1)
- Quality Infrastructure (1)
- Rapid phase transition (1)
- Renewable energy (1)
- Risk Assessment (1)
- Safety characteristic (1)
- Sicherheit von Wasserstofftechnologien (1)
- Slow strain tensile tests (1)
- Synthetic Gas (1)
- Thermal runaways (1)
- Trustworthy Hydrogen (1)
- Wasserstoff Hydrogen (1)
- modulare Pipelineanlage (1)
Organisationseinheit der BAM
- 2 Prozess- und Anlagensicherheit (22) (entfernen)
Eingeladener Vortrag
- nein (17)
In this presentation the drivers for the rise of hydrogen technologies are outlined and main challenges for the market ramp-up are shown. Finally, the activities and capabilities of the competence center H2Safety@BAM are characterized and some of the current projects at BAM adressing the main challenges for hydrogen technologies are presented focussing on the hydrogen transport and infrastructure.
In the DECHEMA Virtual Talks, general aspects of the safety and acceptance of hydrogen technologies were presented. How can trust in new technologies be built when past accidents led to myths and fairy tales? The presentation does away with general prejudices and shows that handling hydrogen is neither more unsafe nor safer than handling other fuel gases. The basis for the safe handling of hydrogen is always a risk analysis.
The Gases Advisory Group is organized regularly by the Prevention Division of the German Employer's Liability Insurance Association for Raw Materials and the Chemical Industry. The event serves as an exchange between science and industry on current safety-related issues concerning oxygen and hydrogen. In this context, BAM presented an overview of its various activities of the competence center H2Safety@BAM, which are reflected in the entire hydrogen value chain. In addition, the plans for the expansion of the test infrastructure at BAM's Technical Safety Test Site were presented. The results of the DELFIN project on the safety of pressurized gas storage tanks, the release tests of liquid hydrogen as well as the underfiring of corresponding cryogenic storage tanks and the plans for the ModuH2Pipe@BAM project were also presented. The presentation concluded with the current recommendations of the Hydrogen Research Network.
The BTU-BAM graduate school Trustworthy Hydrogen was presented at the online meeting of the Lausitz Hydrogen Network entitled "Business meets Science and Research". It is the first graduate school in Germany to focus on the trustworthiness of hydrogen and combines the unique competencies of BAM and BTU to train the next generation of
interdisciplinary hydrogen scientists.
Hydrogen differs from most other flammable gases regarding the safety related properties. Mainly the minimum ignition energy (MIE) is particularly low and the burning velocity is particularly high. Hydrogen mixtures are formed in different hydrogen applications, for example if hydrogen is added to the existing natural gas grid, if synthetic gas (mixture of CO and H2) is produced or in biogas plants. Safety related properties of hydrogen mixtures were determined experimentally and are presented in this presentation. Moreover the accuracy of estimation methods for safety related properties of hydrogen mixtures is evaluated.”
Hydrogen is a central component of the energy transition and the European Green Deal for a climate-neutral Europe. To be able to achieve the targets defined by 2045, the EU and the German government have drafted a framework for action and are making long-term investments in research, development and the rapid implementation of innovative hydrogen technologies.
The conditions for a successful energy transition and the economic use of green hydrogen as a clean energy carrier are Hydrogen readiness and a rapid market ramp-up, as well as the establishment of the necessary value chains in the national and European framework. Reliable quality and safety standards are the prerequisite for ensuring safety of supply and environmental compatibility and for creating trust in these technologies.
BAM has bundled its expertise in the field of hydrogen technologies into a competence center H2Safety@BAM to create confidence in the technology and to support the hydrogen strategies of the German government and the EU. The topic of hydrogen has been current at BAM for more than one hundred years and is also currently the focus of numerous research and cooperation activities. The competence centre H2Safety@BAM and its vision of “We build trust in hydrogen technologies” will be presented with its many safety-related topics, which can be found throughout the entire hydrogen value chain. Two deep dives will present the results on projects dealing with the design-to-cost issue of classical pressurized gas storage containments and the consequences of the release of liquid hydrogen, which will be roughly compared to the release of ammonia.
The following presentation provides an overview on some of the challenges with metallic materials used as structural materials in the energy sector for the transport and storage of hydrogen. The presentation contains explanations about the methodologies utilized to characterize the susceptibility of these materials for hydrogen.
Experiments have been performed to determine whether a storage vessel containing LH2 and caught in a fire engulfing the vessel can result in a BLEVE (Boiling Liquid Expanding Vapour Explosion) and if so its effects. The tests were performed at the Test Site Technical Safety of the Bundesanstalt für Materialforschung und –prüfung (BAM) in Horstwalde, Germany.
Three tests were performed using double-walled vacuum insulated vessels of 1 m3 volume. The cylindrical Vessels differed in orientation (horizontal or vertical) and the insulation material used (perlite or multi-layer insulation (MLI)). The degree of filling of the vessels was approximately 35-40 % in each of the tests performed. The fire load was provided by a propane fed burner positioned under the storage vessel and designed to give a homogeneous fire load.
The conditions in the vessel (temperatures and pressure) as well as external effects (heat radiation, blast waves, flame ball development and fragmentation) were measured.
All vessels were equipped with K-type thermocouples at several locations: inside the inner vessel in the gas phase and the liquid phase, on the inner and outer side of the inner vessel and on the inner and outer side of the outer vessel. The pressure inside the inner vessel (both in liquid, as a level indicator, and gaseous phase), and in the space between the inner and outer vessels (vacuum pressure) was measured.
Bolometers were used to measure the heat radiation generated by both the propane fire and that generated by a possible fireball/BLEVE. To measure blast generated by the vessel burst/BLEVEs blast pencils were positioned at three locations in two directions. Weather conditions were monitored at two weather stations. Further several cameras were used to monitor the events: normal cameras, infrared (IR)-cameras, high-speed cameras also on board of a drone.
Two of these vessels, a horizontal and a vertical vessel both insulated with perlite withstood the fire loading for 1 hour 20 minutes and 4 hours respectively without catastrophic failure. A horizontal vessel insulated with MLI failed by bursting after 1 hour and 6 minutes resulting in a fireball, fragments, and blast waves.
Within a research cooperation between BAM and Gexcon as part of the SH2IFT program, large scale experiments have been performed at the Test Site Technical Safety of the Bundesanstalt für Materialforschung und –prüfung (BAM) to determine the hazards emerging from a vacuum insulated cryogenic storage vessel containing liquified hydrogen (LH2) is caught in a fire engulfing it.
The paper provides a summary of safety characteristics of hydrogen and hydrogen fuel gases. The inves-tigations focus on water electrolysis, the feeding of hydrogen into the natural gas grid and the use ofhydrogen for the fermentation process in biogas plants. The safety characteristics of hydrogen such as avery low minimum ignition energy, very large explosion range and high flame velocity with the resultingrapid pressure increase of hydrogen explosions are of particular importance for explosion protection andthey differ strongly from those of natural gas. Explosion ranges of hydrogen-methane-carbon dioxidemixtures have been measured for the use of hydrogen in biomethane production. The paper also showsand discusses explosion ranges of hydrogen and hydrogen-natural gas mixtures. Pressure and tempera-ture dependencies of the explosion limits of mixtures were investigated. Furthermore, pressure rise rates(KGvalues) were measured with regard to constructive explosion protection. The maximum experimen-tal safe gaps were determined for the classification of the mixtures and assignment to explosion groupsaccording to the European ATEX directives. It was found that admixture of 10% hydrogen to natural gashas only a minor influence on the safety characteristics of gas explosions.