BAM Dissertationsreihe
Filtern
Erscheinungsjahr
- 2015 (3) (entfernen)
Dokumenttyp
- Dissertation (3) (entfernen)
Sprache
- Englisch (3) (entfernen)
Referierte Publikation
- nein (3)
Schlagworte
- CFD (1)
- Euler/Lagrange approach (1)
- OFDR (1)
- QR codes (1)
- Shape memory polymers (1)
- distributed backscatter measurement (1)
- durability (1)
- dust explosion protection (1)
- dustiness (1)
- optical fiber sensor (1)
- polymer optical fiber (POF) sensor (1)
- smart materials (1)
- structural health monitoring (1)
- thermochromism (1)
- vented dust explosion (1)
132
The aim of this thesis was the development of switchable information carriers based on shape memory polymers (SMPs) and the investigation of their durability. Deployed as a new kind of security label, such technology may be an effective tool to prevent counterfeiting and product piracy.
Thermoplastic as well as thermoset SMPs turned out to be applicable as a specific substrate for the fabrication of switchable information carriers. In particular, a physically cross-linked and semi-crystalline poly(ester urethane) (PEU), and a chemically cross-linked epoxy-based polymer were investigated. Both SMPs were able to undergo distinct changes in shape upon triggering, which is commonly known as the shape memory effect (SME).
A key step for the fabrication of switchable information carriers was the development of a suitable technique for a surface-specific coloring of the polymeric base material. In particular, it was necessary to have a thin coat of paint in order to assure sufficient surface contrasts within the subsequently laser-engraved barcodes (e.g. quick response (QR) codes). In detail, coloring was conducted by diffusion of staining solutions, based on organic dyes, into the polymeric matrix. As a result of properly selected exposure times, homogenous layers of paint having thicknesses of about 100 μm, could be produced.
In order to obtain room temperature stable, temporary shapes with non-decipherable code information, various programming procedures were applied to the information carriers. These were either based on tensile or on compressive deformation. For instance, when using plane steel plates in the course of compressive deformation, code areas were randomly distorted. By contrast, selective distortions could be achieved using a steel ball type indenter. However, the triggering of the SME resulted in almost complete shape recoveries. As a result, the information carriers could reliably be switched back to readable states.
Before the developed information carriers can be brought onto the market, it is important to evaluate their durability against various environmental impacts. Artificial weathering was conducted exemplarily on blue and black colored QR code carriers based on PEU. Various scenarios were selected: exposure to UVA irradiation and aging in aqueous solution. In both cases, the durability was investigated at temperatures below and above the switching temperature of the employed SMP. It turned out, that the limiting factor for the usage of switchable information carriers was a lack of contrast and thus was dye-related. In the case of UV irradiation, the color of the dyes started fading, culminating in unreadable QR codes. For hydrolytic degradation, the non-colored code regions were stained in the course of aging. This originates from the fact that the organic dyes used for coloring were soluble in water. As a consequence, they were able to diffuse easily in and out of the swollen polymeric matrix. For both scenarios, aging at elevated temperature caused acceleration of the observed effects. However, the shape memory properties of the PEU were only slightly influenced by the applied aging scenarios.
Next, an additional thermo-responsive security feature was added to the information carriers. Therefore, thermochromic pigments (T-PIGs) were embedded into a PEU matrix. However, in contrast to the organic dyes, the size of the thermochromics microcapsules was too large to diffuse into the polymeric matrix. Thus, another procedure for a surface-specific coloring of the PEU was developed. This mainly included the preparation of a PEU-paste doped with T-PIG by solution mixing. The thermochromic paste was deposited by means of a solvent casting technique as thin layer atop the PEU plaque. After solvent evaporation, tightly connected PEU/PEU-T-PIG laminates were obtained. Beyond that, the layer thickness was adjustable by using a doctor blade for the paste deposition. Subsequent laser ablation finalized the QR code carriers. These were readable at room temperature, but unreadable above the color switching temperature of the employed T-PIGs due to a lack of contrast. Hence, the obtained multifunctional information carriers were characterized by distinct shape memory properties and tunable color switching performances. Furthermore, the combination of several T-PIGs having different colors and switching temperatures resulted in surfaces with multiple and unique temperature-dependent changes in color. Besides that, information carriers with temporarily concealed information could be obtained by covering the QR code with an additional layer doped with T-PIG.
125
In this thesis, an alternative approach to the well-known optical time domain reflectometry (OTDR) technique is presented. A thorough analysis regarding distributed backscatter measurement in optical fibres is provided and its prospects for optical fibre sensing applications are demonstrated and discussed. The measurement approach is referred to as incoherent optical frequency domain reflectometry (I-OFDR): the frequency response of the fibre under test is measured and transferred into its time domain equivalent using inverse Fourier transform. This general technique has been studied and used for the measurement of nonlinear scattering effects in optical fibres. The requirements, limitations and prospects for general backscatter measurement, however, are different and have not been studied in detail prior to this work. Distributed sensing using Rayleigh scattering and reflective events in the fibre is first demonstrated using I-OFDR with remarkable measurement resolution. The incoherent detection technique allows for measuring singlemode fibres as well as multimode fibres. The first part of this work deals with the theoretical analysis and optimized implementation of the frequency domain approach. Necessary signal processing and its impact on the time domain response are presented. Sources of deviation from the linearity of the I-OFDR system are identified and an optimized laboratory setup is introduced; the crucial impact of the source coherence is thoroughly discussed. Suitable system parameters for the I-OFDR approach are defined: the system dynamic range and sensitivity are determined. A technique to suppress the dynamic range-limiting signal originating from strong reflections in the fibre is suggested. It is demonstrated that the I-OFDR technique has advantages over OTDR in terms of implementation for high-resolution measurement, measurement accuracy and signal stability. These advantages and measurement possibilities specific to the frequency domain approach are utilized for spatially resolved sensing applications in the second part of this work: A low optical loss polymer optical fibre (POF) is for the first time studied and analyzed for distributed strain sensing. The backscatter level dependence on strain in the fibre can be used to detect and locate strained fibre sections. Also, a correlation algorithm is proposed and demonstrated to measure length changes along the fibre with mm-resolution by correlating the typical backscatter signature of this fibre type. The fibre type is analyzed in detail regarding cross-sensitivities to temperature, relative humidity as well as mode propagation influences. The proposed sensing principles in combination with the highresolution I-OFDR allow for promising distributed sensing applications. Special interest is expressed by the structural health monitoring (SHM) sector since the fibre can measure strain values exceeding 100 %. Another sensing technique, specific to I-OFDR, is proposed for quasi-distributed and dynamic measurement of length changes and optical power changes at reflective events along the fibre. Precise calculation of the positions and reflected powers of multiple reflections can be conducted in parallel from the measurement of a few sampling points of the complex-valued frequency response. That allows for measuring with an increased repetition rate up to 2 kHz or at μm-scale length changes resolution at lower measurement frequencies. The approach is demonstrated in the laboratory and in a field application by measuring the deformation of a masonry building on a seismic shaking table. The I-OFDR exhibits competitive performance for general high-resolution backscatter measurement and the proposed optical fibre sensor principles may have promising prospects in the structural health monitoring (SHM) sector.
123
A new safety characteristic named “dustiness” according to the German guideline VDI 2263 – part 9 is investigated. Dustiness describes the tendency of a powder to form airborne dust by a prescribed mechanical stimulus. Dusts often behave differently in a dust/air mixture or in the case of a dust explosion, even if they have comparable physical properties such as particle size and density. In order to look into the effects of dustiness on dust cloud Formation and explosion properties experiments and simulations in a 75 L vertical dust Dispersion glass tube apparatus were carried out. In a second step industrial-scale experiments were carried out in a 50 m³ silo.
Experiments showed that particle size and density are not the only factors which influence dustiness, since the chosen dusts with comparable densities and particle size distributions showed very different behavior in the flow. Other dust properties such as particle shape, specific surface area, humidity and agglomeration processes have an influence which can outweigh size and density. Preliminary explosion experiments showed that dustiness has an influence on the reduced explosion pressure and pressure rise in a vented 75 L test apparatus. In order to verify the results for applications in the process industries further tests with different settings were carried out in industrial-scale experiments. First dust concentration
measurements were done in order to evaluate the reproducibility of filling processes.
Experiments showed that single tests differed by 30 % and more from the average depending on dust sample and filling method. First explosion experiments with a worst-case
scenario in terms of high turbulence and homogenous dust distribution showed that the maximum reduced explosion pressures were well below the calculated values. Reduced
explosion pressures and rates of pressure rise of the hree tested dust were as their Explosion characteristics pmax and KSt let suggest.
The Euler/Lagrange and the Euler/Euler approaches were compared simulating dust/air mixtures. Especially sedimentation and the ability of the approaches to simulate the tendency of dust to stay airborne were investigated. The Euler/Lagrange approach is better
suited for simulating local dust concentrations, particle size distributions and particle forces.
With the Euler/Euler method it is possible to achieve fast solutions for one specified diameter.
The computational fluid dynamics code ANSYS CFX R14 was used for all simulations.