Ingenieurbau
Filtern
Erscheinungsjahr
- 2023 (143) (entfernen)
Dokumenttyp
- Vortrag (143)
Referierte Publikation
- nein (143)
Schlagworte
- Korrosion (17)
- Hydrogen (8)
- Potentialfeldmessung (8)
- Wasserstoff (8)
- Corrosion (7)
- Blast (4)
- Korrosionsschutz (4)
- LH2 (4)
- MLI (4)
- Nichtelektrische Funken (4)
- Pipeline (4)
- Reibfunken (4)
- Research (4)
- Schlagfunken (4)
- Schleiffunken (4)
- Schweißen (4)
- Structural health monitoring (4)
- Auslagerungsversuche (3)
- Biocomposite (3)
- Blast injury (3)
- DAS (3)
- Distributed acoustic sensing (3)
- Experimental setup (3)
- Fire (3)
- Mechanisch erzeugte Funken (3)
- Mechanischer Explosionsschutz (3)
- Monitoring (3)
- Nichtelektrischer Explosionsschutz (3)
- Nichtrostender Stahl (3)
- Reparatur (3)
- Shock wave generator (3)
- Sustainability (3)
- Welding (3)
- AKR-Vermeidung (2)
- Alkali-Kieselsäure-Reaktion (2)
- Auswirkungsbetrachtung (2)
- Bahnerschütterungen (2)
- Bayesian model updating (2)
- Betonfahrbahndecke (2)
- Bio-Polymers (2)
- Brandschutz (2)
- Bridge (2)
- Bridges (2)
- Composites (2)
- Concrete (2)
- Dangerous goods packagings (2)
- Design methods (2)
- Digital Twin (2)
- Distributed fiber sensing (2)
- Domain Decomposition (2)
- Drop test (2)
- Durability (2)
- Einsatzkräfte (2)
- Existing structures (2)
- Flame retardancy (2)
- Flame retardant (2)
- Flame retardants (2)
- Fügetechnik (2)
- Gradient damage model (2)
- HME (2)
- Innenhydrophobierung (2)
- KorroPad (2)
- Korrosionsprüfung (2)
- Körpermodell (2)
- LNG (2)
- Lean Duplex (2)
- Leather (2)
- Model Bias (2)
- Normung (2)
- Numerical modelling (2)
- Offshore wind turbines (2)
- Physical phenomenology (2)
- Physical testing (2)
- Pile foundations (2)
- Pipelines (2)
- Precurser (2)
- Pressure wave (2)
- Primäres Explosionstrauma (2)
- Renewable (2)
- Repair Welding (2)
- Safety (2)
- Schallemissionsanalyse (2)
- Simulation Models (2)
- Spannungsrisskorrosion (2)
- Sustainable (2)
- Uncertainty Quantification (2)
- Variational Multiscale Method (2)
- mTBI (2)
- 2-span bridge (1)
- 3D concrete printing (1)
- 3D-Laserscanning (1)
- 3DCP (1)
- ABS (1)
- ADR (1)
- Acceleration sensors (1)
- Accidential Fire (1)
- Accidents (1)
- Achsimpulse (1)
- Acoustic sensing (1)
- Additive Manufacturing (1)
- Additive manufacturing (1)
- Ageing (1)
- Alternative Antriebe (1)
- Alterungs- und Schädigungsprozesse (1)
- Angle of repose (1)
- Antimony (1)
- Antioxydant (1)
- Arbeitsschutz (1)
- Artificial seawater (1)
- Asphalt (1)
- Assessment (1)
- Atmosphere (1)
- Atmosphäre (1)
- Atmosphärische Korrosion (1)
- Axle-sequence spectrum (1)
- BOS (1)
- Base isolation (1)
- Baugrunddynamik (1)
- Bauwerksmonitoring (1)
- Behälterversagen (1)
- Bench-scale testing (1)
- Beschichtungssysteme (1)
- Bestimmungsgemäßer Gebrauch im Explosionsschutz (1)
- Bestimmungsgemäßer Gebrauch im explosionsgefährdeten Bereich (1)
- Betonfahbahndeckentexturen (1)
- Bimetallkorroison (1)
- Bingham Fluid (1)
- Biokohle (1)
- Blast experiment (1)
- Blast tests (1)
- Brandverhalten (1)
- Brandversuch (1)
- Bridge Monitoring (1)
- Bridge monitoring (1)
- Brominated flame retardant (1)
- Brücke (1)
- Brücken (1)
- Brückenmonitoring (1)
- Burning behavior (1)
- CWI (1)
- Calcium hypophosphite (1)
- Carbon fibre reinforced polymer (1)
- Cars (1)
- Charring (1)
- Chemisoprtion (1)
- Circular Economy (1)
- Circular economy (1)
- Coda (1)
- Cold (1)
- Concrete Modeling (1)
- Container loading (1)
- Copper (1)
- Corrosion Protection (1)
- Coupling (1)
- Crygenic (1)
- Damage Detection (1)
- Damage detection (1)
- Data provenance (1)
- Data-supported assessment (1)
- Database for Analyzing (1)
- Datenanalyse (1)
- Dauerhaftigkeit (1)
- Deckschichten (1)
- Denkmalpflege (1)
- Digital I-OFDR (1)
- Digital image correlation (1)
- Distributed fiber optic sensors (1)
- Distriubuted polymer optical fiber sensor (1)
- Drinking water installations (1)
- Dripping (1)
- Dummy (1)
- Dynamic soil properties (1)
- Dynamic structural response (1)
- Dynamische Bodenkennwerte (1)
- EU project ODYSSEUS (1)
- Earth masonry (1)
- Elastische Gleiselemente (1)
- Electrochemistry (1)
- Elektrochemische Korrosion (1)
- Embedded Sensors (1)
- Embedded fiber optic sensor (1)
- Embedded sensors (1)
- Emission (1)
- Entflammbarkeit (1)
- Environmental monitoring (1)
- Erschütterungsminderung (1)
- Erschütterungsprognose (1)
- Experimental data (1)
- Experimental data to trustworthy (1)
- Explicit Dynamics (1)
- Explosives (1)
- Explosivstoffe (1)
- FSI (1)
- Fading suppression (1)
- Fahrzeug-Fahrweg-Boden-Wechselwirkung (1)
- Fahrzeugbrand (1)
- Fatigue (1)
- Fehlerquellen (1)
- Ferngasleitung (1)
- Feuerverzinkter Stahl (1)
- Feuerwiderstand (1)
- Fire Reference Test (1)
- Fire Testing (1)
- Fire protection (1)
- Fire resistance (1)
- Fire scenario (1)
- Flame inhibition (1)
- Flame retardancy concepts (1)
- Flammschutz (1)
- Flexibility (1)
- Fließfähigkeit (1)
- Floors (1)
- Flow properties (1)
- Flowability (1)
- Footbridge (1)
- Forschung (1)
- Foundation load (1)
- Foundations (1)
- Freight train (1)
- Frequency response function (1)
- Full field measurements (1)
- Full-field measurements (1)
- Galvanische Anoden (1)
- Galvanische Korrosion (1)
- Gefahrguteinstufung (1)
- Gefahrgutverpackungen (1)
- Gefahrstoffe (1)
- Gefahrstoffverordnung (1)
- Geothermal (1)
- Gleiströge (1)
- Gradient-Damage (1)
- Graphene (1)
- Grinding (1)
- Grooving (1)
- Grooving corrosion (1)
- Ground granulated blast furnace slag (1)
- Ground vibration (1)
- Großversuch (1)
- Guided Waves (1)
- HSCC (1)
- Handheld device (1)
- Hausner ratio (1)
- High-pressure (1)
- High-rise buildings (1)
- High-speed train (1)
- Home-made-explosives (HME) (1)
- Homemade explosives (1)
- Hoses (1)
- ISO 16103 (1)
- ISO 3690 (1)
- ISO 3821 (1)
- Impact target (1)
- In-service (1)
- Inertial interaction (1)
- Infractstructure (1)
- Inspeciton (1)
- Intumescent coating (1)
- Joining (1)
- Kinematic interaction (1)
- Klebebänder (1)
- Knudsen effect (1)
- Korrosionsverhalten (1)
- Korrosivität (1)
- LLB (1)
- Lab-on-a-chip (1)
- Lagerung (1)
- Layered soil (1)
- Lead (1)
- Leakage (1)
- Leichte Gesteinskörnungen (1)
- Leichtmörtel (1)
- LoRaWAN (1)
- Load Test (1)
- Localized model order reduction (1)
- Low-cost (1)
- Luftqualität (1)
- Maintal Bridge Gemuenden (1)
- Maintenance (1)
- Marine Corrosion (1)
- Markthochlauf (1)
- Material characterization (1)
- Material moisture (1)
- Measurement uncertainty (1)
- Measurements (1)
- Mechanische Funken (1)
- Mechanische Zündquellen (1)
- Mesh Convergence (1)
- Messung (1)
- Misuse of explosives (1)
- Mobilitätskonzepte (1)
- Modal load spectrum (1)
- Modal system identification (1)
- Mode of action (1)
- Model Order Reduction (1)
- Model calibration (1)
- Model updating (1)
- Molecular diffusion (1)
- Monopile (1)
- Movin load test (1)
- Multiscale Method (1)
- Multiscale method (1)
- NDT (1)
- Nanocomposites (1)
- Natural (1)
- Nichtelektrische Zündquellen (1)
- Non destructive testing and evaluation (1)
- Non-destructive testing (1)
- Numerical Simulation (1)
- Numerical analysis (1)
- Observing temperatur (1)
- Offshore (1)
- Offshore wind (1)
- Offshore wind-turbine foundations (1)
- Oxygen (1)
- Passenger train (1)
- Permeation (1)
- Photothermal (1)
- Physisorption (1)
- Pile groups (1)
- Polizei (1)
- Potentialmessung (1)
- Powders (1)
- Practical application (1)
- Preparation of HME (1)
- Primary blast injury (1)
- Primäre Explosionswirkung (1)
- Probabilistic methods (1)
- Probability of Detection (1)
- Protective layer (1)
- Prüfmethode (1)
- Prüfverfahren (1)
- Pulver (1)
- Railbridge (1)
- Railway (1)
- Railway bridge (1)
- Railway tracks (1)
- Railway tunnel (1)
- Reaktives Brandschutzsystem (1)
- Recycling (1)
- Recycling-Kunststoffe (1)
- Reduced Order Model (1)
- Reduced order modelling (1)
- Reflected pressure (1)
- Reinforcement (1)
- Reinforcing steel (1)
- Reliability (1)
- Reliability assessment (1)
- Resources from waste streams (1)
- Review (1)
- Rheology (1)
- Richtlinie (1)
- Risks (1)
- Round Robin Data (1)
- SBFEM (1)
- SEA (1)
- SHM (1)
- Safety in technology and chemistry (1)
- Scattering (1)
- Schallemission (1)
- Schweißverbindung (1)
- Schädigungscharakterisierung (1)
- Schüttgüter (1)
- Schüttwinkel (1)
- Security (1)
- Sediment (1)
- Seismic measurements (1)
- Selbstentzündung (1)
- Sensing node (1)
- Sensor network (1)
- Sensorik (1)
- Sicherheit (1)
- Sift-proofness (1)
- Simulation models and Standards (1)
- Simulations (1)
- Smart geosynthetics (1)
- Smoke (1)
- Soil-pile interaction (1)
- Soil-structure interaction (1)
- Spannbeton (1)
- Spanndrahtbruchdetektion (1)
- Spannstahl (1)
- Spannstahlbruch (1)
- Sprengversuche (1)
- Stahlbau (1)
- Stainless Steel (1)
- Standardization (1)
- Start-up (1)
- Statistical correlations (1)
- Statistik (1)
- Statistische Korrelationen (1)
- Steel (1)
- Steel pipes (1)
- Strain detection (1)
- Structural Analysis (1)
- Structural build-up (1)
- Structural dynamics (1)
- Structural integrity (1)
- Structural response (1)
- Studie (1)
- Study (1)
- Störgrößen (1)
- Sulfide (1)
- Surface-tunnel reduction (1)
- Synergism (1)
- Synergy (1)
- TRGS (1)
- TTS (1)
- Tank (1)
- Technische Regeln für Gefahrstoffe (1)
- Tests (1)
- Thixotropy (1)
- Trace detection (1)
- Traffic monitoring (1)
- Transfer fuction (1)
- Transport (1)
- Traumatic brain injury (1)
- Trägergasheißextraktion (1)
- Tunnel (1)
- Tunnelstrecke (1)
- Ultrasonic (1)
- Ultrasonic structure-scanner (1)
- Ultrasound (1)
- Umwelteinflüsse (1)
- Validation (1)
- Verarbeitung (1)
- Verkehrsinfrastruktur (1)
- Vermeidung der Elementbildung (1)
- Verteilte faseroptische akustische Sensorik (1)
- Vessels (1)
- Vibration analysis (1)
- Vibration measurements (1)
- Vibrations (1)
- Vitrimer (1)
- Vitrimers (1)
- Wasserstoffspeicher (1)
- Water-structure interaction (1)
- Werkstoffauswahl (1)
- Wiederkehrende Prüfung (1)
- Wind-farm aerodynamics (1)
- Wire arc additive manufacturing (1)
- Wood (1)
- Zink (1)
- Zivile Sicherheitsforschung (1)
- nichtrostende Stähle (1)
- zerstreute Achslastimpulse (1)
Organisationseinheit der BAM
- 7 Bauwerkssicherheit (86)
- 7.6 Korrosion und Korrosionsschutz (29)
- 2 Prozess- und Anlagensicherheit (23)
- 8 Zerstörungsfreie Prüfung (20)
- 7.2 Ingenieurbau (18)
- 2.1 Sicherheit von Energieträgern (15)
- 7.7 Modellierung und Simulation (14)
- 3 Gefahrgutumschließungen; Energiespeicher (13)
- 7.5 Technische Eigenschaften von Polymerwerkstoffen (13)
- 9 Komponentensicherheit (12)
Eingeladener Vortrag
- nein (143) (entfernen)
Bei Geräten und Maschinen zur bestimmungsgemäßen Verwendung in explosionsgefährdeten Bereichen muss in der europäischen Union eine Zündgefahrenbewertung durchgeführt werden. Dabei müssen unter anderem die Gefahren von nichtelektrischen Zündquellen betrachtet werden, zu denen auch die mechanischen Schlagvorgänge gehören.
Bei Schlagvorgängen kommt es infolge des Zusammenstoßes zweier Werkstücke zu einer Umwandlung der kinetischen Energie. Dabei erhöht sich die Temperatur der Werkstoffe an der Kontaktstelle und es kommt unter Umständen zu einem Abtrennvorgang kleiner Partikel erhöhter Temperatur. Sowohl die heißen Kontaktstellen als auch die abgetrennten Partikel können eine wirksame Zündquelle für ein explosionsfähiges Gasgemisch darstellen. Zur Festlegung von Grenzwerten wurden in der Norm DIN EN ISO 80079-36:2016 die Gasgemische anhand ihrer Explosionsgruppe klassifiziert und zu jeder Gruppe die maximale Energie des Schlagvorgangs festgelegt, unter derer die Entstehung einer wirksamen Zündquelle als unwahrscheinlich angenommen werden kann.
Nichtelektrischer Explosionsschutz - Grundlagen und Maßnahmen zum nichtelektr. Explosionsschutz
(2023)
Bei Geräten und Maschinen zur bestimmungsgemäßen Verwendung in explosionsgefährdeten Bereichen muss in der europäischen Union eine Zündgefahrenbewertung durchgeführt werden. Dabei müssen unter anderem die Gefahren von nichtelektrischen Zündquellen betrachtet werden, zu denen auch die mechanischen Schlagvorgänge gehören.
Bei Schlagvorgängen kommt es infolge des Zusammenstoßes zweier Werkstücke zu einer Umwandlung der kinetischen Energie. Dabei erhöht sich die Temperatur der Werkstoffe an der Kontaktstelle und es kommt unter Umständen zu einem Abtrennvorgang kleiner Partikel erhöhter Temperatur. Sowohl die heißen Kontaktstellen als auch die abgetrennten Partikel können eine wirksame Zündquelle für ein explosionsfähiges Gasgemisch darstellen. Zur Festlegung von Grenzwerten wurden in der Norm DIN EN ISO 80079-36:2016 die Gasgemische anhand ihrer Explosionsgruppe klassifiziert und zu jeder Gruppe die maximale Energie des Schlagvorgangs festgelegt, unter derer die Entstehung einer wirksamen Zündquelle als unwahrscheinlich angenommen werden kann.
Es werden das EU-finanzierte FE-Projekt ODYSSEUS, ausgewählte Ergebnisse zum Thema Home-made-explsosives (HMEs) und precursers, aktuelle Fragestellungen und ein Ausblick vorgestellt.
The ODYSSEUS project aims at improving knowledge about explosives precursers/HMEs and at developing and improving prognostic and detection tool to counter and prevent terrorist attacks. The contribution presents an overview of the ODYSSEUS approaches in countering and preventing terrorist attacks. The lecture will also show what knowledge has been gained to date about HMEs and new precursers and what consequences result from this.
EU project ODYSSEUS
(2023)
Im Rahmen dieses Vortrags wurden aktuelle Arbeiten der BAM im Rahmen der Forschungszusammenarbeit mit dem Bundeswehrkrankenhaus Berlin zum primären Explosionstrauma vorgestellt. Den Schwerpunkt des Vortrags bildeten die Auswirkungen der kumulierten Belastung durch "low-level blast" auf das Gehirn von Einsatzkräften und Rückschlüsse für den Arbeitsschutz und die Arbeitsmedizin.
Avoiding antimony – effect of Ca(H2PO2)2 on smoke emission and fire behaviour in brominated ABS
(2023)
The replacement of antimony trioxide (Sb2O3) in brominated flame-retardant ABS (ABS/FR) is of great interest. This study investigates the influence of calcium hypophosphite (CaP) in ABS/FR on flame retardancy and smoke emission. Different amounts of talc are added to ABS/FR/CaP to evaluate the influence of an inorganic barrier on smoke emission and flame retardancy. The cone calorimeter unveiled a reduction by 46% in PHRR for ABS/FR/CaP. Additional 8 wt.-% talc (ABS/FR/CaP/8Talc) reduced the PHRR by 61%. ABS/FR/CaP exhibited a more condensed phase action, which resulted in less smoke emission. The study investigates the influence of CaP in ABS/FR on the smoke toxicity, smoke density and the smoke particles distribution in the smoke density chamber (ISO 5659-2) coupled to a FTIR spectrometer and electrical low pressure cascade impactor (ELPI).
Blast furnace cements (CEM III) and alkali-activated slags are binders for concretes with several advantageous engineering properties, and their increased adoption in construction industry could contribute to reducing the CO2 emissions associated with cement production and use. However, the current knowledge about how these cements protect steel reinforcement in concretes against corrosion is very incomplete, which impedes their large-scale application. This knowledge gap is mainly due to the fact that these cements release sulfide and other reduced sulfur species into the concrete pore solution, the consequences of which for the state of the reinforcement and electrochemical measurements are not fully understood.
The present contribution first describes peculiarities of electrochemical measurements of steel in sulfide-containing cementitious materials and related solutions as reported in the literature and a recent report by EFC Working Party 11. It is demonstrated that the high sulfide concentrations in these systems lead to low open circuit potentials and low polarisation resistances, which may be incorrectly interpreted as indicating active corrosion of the steel.
Second, preliminary results of an ongoing project [funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) – 458297195] related to the passivation and corrosion initiation of steel in sulfide-containing solutions and mortars are presented. Eight mortars based on one alkali-activated blast furnace slag (BFS), three alkali-activated BFS/fly ash blends, one sodium sulfate-activated CEM III/C (‘hybrid cement’), one CEM III/C, one CEM III/B, and one CEM I (ordinary Portland cement, OPC) were produced, and their pore solutions expressed and analysed after 7, 14, 28, and 56 days of curing. The pH values of the solutions differed systematically, with the highest pH values recorded for the CEM I and the alkali-activated BFS/fly ash blends with a high proportion of fly ash, and the lowest pH recorded for the CEM III/B. The redox potentials of the solutions were between −500 mV and −340 mV vs. Ag/AgCl for the alkali-activated binders, approx. +10 mV vs. Ag/AgCl for the CEM I, and in between for the CEM III/B and the CEM III/C. As expected, the electrical conductivity was highest for the alkali-activated binders. These results are explained by the chemical compositions of the pore solutions of the mortars.
Finally, a test set-up to investigate the behaviour of steel in sulfide-containing solutions and the changes on subsequent oxygen and/or chloride addition is introduced. Preliminary electrochemical measurements of steel in sulfide-containing solutions are presented and discussed in the context of the above-mentioned data from the literature and the compositions of the pore solutions of the studied mortars.
Packages for the transport of radioactive material shall meet the mechanical and thermal test requirements of the International Atomic Energy Agency (IAEA) regulations for package design approval. Besides mechanical testing, the Federal Institute for Materials Research and Testing (BAM) performs thermal tests in accordance with the IAEA regulations. The thermal test includes a 30-minute 800°C fully engulfing fire.
BAM continuously performs various thermal experiments for the investigation of the thermal response of packages with respect to the IAEA fire. The purpose of this paper is to give an overview of the already performed, ongoing and future physical tests and experiments of BAM in the field of thermal investigations. These research and development works shall support our competencies for the authority package design assessment.
BAM operates a propane gas fire test facility. To be able to carry out comparative investigations and validity between the propane fire and the in detail prescribed pool fire test in the regulations, BAM carries out various calorimetric tests and investigates the boundary conditions of the fire with the help of fire reference packages. At the same time, we are conducting various fire scenarios with wood-filled impact limiters. Large-scale fire tests of impact limiters are carried out on a full scale as well as on a small scale. Influencing variables are investigated in particular by means of geometric changes and the consideration of artificial damages, in particular holes. In addition to propane fire as a heat source, thermal scenarios are also investigated with hydrogen as heat source and an infrared radiator system to ignite test specimens. For these numerous test arrangements, the transferability to existing and newly developed transport package designs is essential and fruitful within the review of design approvals, especially for Dual Purpose casks with a long-lasting operation time.
In the course of tomorrow's hydrogen-based energy transition, the construction of the corresponding infrastructure will play a central role. In that context, large diameter long-distance transmission pipelines for hydrogen will be the backbone in the European Union with service pressures from 70 to 90 bar (e.g., depending on national regulations). It is a major goal to rededicate the existing LNG infrastructure despite the necessity of new pipelines. From that point of view repairing of such transmissions pipelines via welding can be necessary. For the LNG infrastructure, it is state of the art that repair welding is conducted at pipelines under service, i.e., the LNG is still flowing as pressurized gas in the steel pipes. The reason is that a shut-down of large diameter pipelines is not so easy or sometimes impossible. In fact, as long no oxygen enters the pipeline, there would be any combustion or (in the worst case) explosion. At the moment, it is entirely open if current repair welding procedures for LNG pipelines can be transferred to pure hydrogen pipelines. In opposite to LNG, hydrogen can be way easier absorbed to the pipeline steels and diffuses through the material. If it accumulates in susceptible regions, i.e., in the welded joint, hydrogen assisted embrittlement could occur. The planned welding procedure requires a so-called preheating and maintenance of the weld joint of up to 300°C for several hours. This temperature is way higher compared to the typical service temperature of max. 40 to 50°C at operational pressures of 100 bar. In accordance to API 941, these low-alloyed pipeline steels are subjected to short-term service loads, which they are not designed for. For that reason, a collaborative project between BAM and DVGW (German Association for Gas and Water professions) was initiated in 2022 to answer the following questions by experiments and numerical simulation of: (1) How many hydrogen is additionally absorbed during the heating of the material to max. 300°C under remaining operational pressures? (2) Is the hydrogen concentration sufficient to reach a critical condition? (3) Which material and weld microstructure is the most susceptible? (4) Is there a significant difference in the repair welding behavior of LNG pipelines that had been already in use for long-term? (5) Which welding parameters and joint dimensions must be ensured for safe repair welding repair of typical pipelines? For that reason, the present study gives an overview on the current practice in repair welding of in-service pipelines, the industrial importance of this topic for the hydrogen-based energy transition and summarizes first results.