Angewandte Physik
Filtern
Erscheinungsjahr
Dokumenttyp
- Vortrag (1134)
- Zeitschriftenartikel (428)
- Beitrag zu einem Tagungsband (342)
- Posterpräsentation (210)
- Forschungsbericht (25)
- Buchkapitel (23)
- Dissertation (23)
- Sonstiges (16)
- Zeitschriftenheft (Herausgeberschaft für das komplette Heft) (11)
- Beitrag zu einem Sammelband (5)
Sprache
- Englisch (1702)
- Deutsch (527)
- Mehrsprachig (2)
- Französisch (1)
Schlagworte
- Hydrogen (96)
- Corrosion (66)
- Laser-induced periodic surface structures (LIPSS) (53)
- Wasserstoff (53)
- Safety (46)
- Ageing (45)
- Eigenspannungen (40)
- Hochfester Stahl (34)
- Transport (34)
- Welding (34)
- Additive Fertigung (33)
- Degradation (32)
- Drop test (29)
- Fatigue (29)
- H2Safety@BAM (29)
- Surface functionalization (29)
- Monitoring (27)
- Femtosecond laser (26)
- Geothermal (26)
- Offshore (25)
- Rubber (22)
- Metal seal (21)
- Radioactive material (21)
- Structural health monitoring (21)
- Composite (20)
- IAEA (20)
- MAG-Schweißen (20)
- Radioaktive Stoffe (20)
- Additive manufacturing (19)
- Compression set (19)
- Explosionsschutz (19)
- LH2 (19)
- Residual stress (19)
- Seal (19)
- Windenergie (19)
- Diffusion (18)
- Korrosion (18)
- Ring Compression Test (18)
- Spent Nuclear Fuel (18)
- Structural Health Monitoring (18)
- Transport packages (18)
- CCS (17)
- Distributed acoustic sensing (17)
- Kaltrisssicherheit (17)
- Schweißen (17)
- SealWasteSafe (17)
- Sicherheit (17)
- Applications (16)
- Fire (16)
- Machine learning (16)
- Simulation (16)
- Storage (16)
- Ultraschall (16)
- Wind energy (16)
- Ökodesign (16)
- Ageing Management (15)
- CO2 (15)
- Cladding Embrittlement (15)
- Coating (15)
- Femtosecond laser ablation (15)
- Hydrogen assisted cracking (15)
- Lithiumbatterien (15)
- Microstructure (15)
- Radioactive waste (15)
- Residual stresses (15)
- Thermoelectrics (15)
- Alterung (14)
- Auswirkungsbetrachtungen (14)
- Creep (14)
- Elektrische Energiespeicher (14)
- Energy efficiency (14)
- FEM (14)
- Impact (14)
- Polyaniline (14)
- Spent fuel (14)
- Stationäre Energiespeicher (14)
- Ultrasound (14)
- Wood (14)
- Concrete (13)
- Energy label (13)
- Offshore wind energy (13)
- Steel (13)
- Zerstörungsfreie Prüfung (13)
- CCUS (12)
- Disposal (12)
- Drop testing (12)
- Druckbehälter (12)
- Endlager (12)
- Extended Storage (12)
- Hydrogen Embrittlement (12)
- Laser processing (12)
- Laser-induced periodic surface structures, LIPSS (12)
- Leakage rate (12)
- NDT (12)
- Non-destructive testing (12)
- P92 (12)
- Spent nuclear fuel (12)
- Standards (12)
- Ultraschallunterstütztes Fräsen (12)
- Ultrasonic-assisted milling (12)
- WEZ-Erweichung (12)
- Wasserstoffspeicher (12)
- Alloy 36 (11)
- Carbon steel (11)
- EBSD (11)
- Fibre break (11)
- Gamma radiation (11)
- Gefahrgut (11)
- Geothermal energy (11)
- Glass (11)
- Heat pump (11)
- Hochfester Feinkornbaustahl (11)
- Imaging (11)
- Leakage (11)
- Lithium Ion Batteries (11)
- Package (11)
- Reliability (11)
- Stainless steel (11)
- Aging (10)
- Container (10)
- Cytop (10)
- Energieverbrauchskennzeichnung (10)
- Finite element method (10)
- Lithium-ion batteries (10)
- Lithium-ion battery (10)
- Long-term behavior (10)
- Multiscale model (10)
- Regulations (10)
- Reparatur (10)
- Thermography (10)
- Transport package (10)
- Transportbehälter (10)
- Behälter (9)
- Cladding (9)
- Composite pressure vessels (9)
- Copper (9)
- Fire test (9)
- Hydrogen embrittlement (9)
- Hydrogen safety (9)
- Konrad (9)
- LNG (9)
- Laser ablation (9)
- Legierungsmodifikation (9)
- Mikrolegierungseinfluss (9)
- Normung (9)
- Oxidation (9)
- Patents (9)
- Publications (9)
- Release (9)
- Safety assessment (9)
- Surface integrity (9)
- Testing (9)
- Thermisches Durchgehen (9)
- ToF-SIMS (9)
- Wärmeführung (9)
- Acceptance rate (8)
- Alloy modification (8)
- Assessment (8)
- Calcium cobaltite (8)
- Composite cylinder (8)
- Creep-resistant steel (8)
- Damage characterization (8)
- EPDM (8)
- Energieeffizienz (8)
- Energiespeicherung (8)
- Erneuerbare Energien (8)
- Fatigue tests (8)
- Forschung (8)
- Friction (8)
- GERG-2008 equation of state (8)
- Glass fiber reinforced polymers (8)
- HNBR (8)
- High-strength steel (8)
- Hydrogen storage (8)
- Interim storage (8)
- Low temperature (8)
- Offshore wind turbines (8)
- Pipeline (8)
- Planar tomography (8)
- Probabilistic (8)
- Radioactive (8)
- Reduced volume method (8)
- Ressourceneffizienz (8)
- Sintering (8)
- Thermal Runaway (8)
- Thermografie (8)
- Tomography (8)
- Tubular X-joints (8)
- Zwischenlagerung (8)
- Acoustic emission (7)
- Battery (7)
- Bauartprüfung (7)
- Broadband dielectric spectroscopy (7)
- Composite pressure vessel (7)
- Crevice corrosion (7)
- Cylinder (7)
- DED-arc (7)
- Elastomer (7)
- Endlagerbehälter (7)
- Equations of state (7)
- Explosion protection (7)
- Ferritic-martensitic steels (7)
- Gas storage areas (7)
- Gefahrguttransport (7)
- Grout (7)
- High strength steel (7)
- Hollow Specimen Technique (7)
- Impact limiter (7)
- LCF (7)
- Lithium (7)
- Lithium-Ionen-Batterie (7)
- Membrane-based gas sensing (7)
- Microstructures (7)
- Nanostructures (7)
- Numerical modelling (7)
- Numerical simulation (7)
- Oxygen evolution reaction (7)
- Radiation monitoring (7)
- Reparaturschweißen (7)
- Rubber seal (7)
- SSRT (7)
- Solidification cracking (7)
- Spectroscopic ellipsometry (7)
- Spent Fuel (7)
- Spent fuel assessment (7)
- Submerged arc welding (7)
- Subsurface monitoring (7)
- TEM (7)
- Thermal runaway (7)
- Ultrasonic testing (7)
- Wind (7)
- X-ray diffraction (7)
- Zulassungen (7)
- Automated manufacturing (6)
- Betriebsfestigkeit (6)
- Bewertung (6)
- Carbon steels (6)
- Catalysis (6)
- Condensation (6)
- Distributed fiber optic sensing (6)
- Distributed sensing (6)
- Ductile cast iron (6)
- Electrochemistry (6)
- Electron backscatter diffraction (6)
- Energiewende (6)
- Energy labelling (6)
- Explosionsgrenzen (6)
- Extended interim storage (6)
- FKM (6)
- Femtosecond laser processing (6)
- Festlegungen (6)
- Fügetechnik (6)
- Gas separation (6)
- Gassensorik (6)
- High-entropy alloy (6)
- Inspection (6)
- Integral range (6)
- Korrosionsprüfung (6)
- MLI (6)
- MVT (6)
- Maritime atmosphere (6)
- Martensitic steel (6)
- Modelling (6)
- Nanoparticles (6)
- Notch stress approach (6)
- Oberflächenintegrität (6)
- Offshore-Windenergieanlagen (6)
- Organic coatings (6)
- Perfluorinated polymer optical fibers (6)
- Pile foundations (6)
- Quality assurance (6)
- Radiation-induced attenuation (6)
- Radiography (6)
- Reinforced concrete structure (6)
- Repair (6)
- Richtlinien (6)
- Risk (6)
- Salinization (6)
- Sample performance chart (6)
- SensRef (6)
- Smouldering (6)
- TMF (6)
- ThermoCalc (6)
- Tribology (6)
- Verschlussbauwerke (6)
- Verteilte faseroptische Sensorik (6)
- WAAM (6)
- Wind turbine blades (6)
- X-ray imaging (6)
- Zuverlässigkeit (6)
- ADR (5)
- BLDC (5)
- BLEVE (5)
- Beförderung (5)
- CO2 corrosion (5)
- Carbon dioxide (5)
- Cathodic delamination (5)
- Chalcopyrite (5)
- Compression stress relaxation (5)
- Consequences (5)
- Corrosion testing (5)
- Crack healing (5)
- DAS (5)
- Density measurements (5)
- Dichtung (5)
- Digital Image Correlation (5)
- Distributed linear sensor (5)
- Droplet corrosion (5)
- Dual purpose casks (5)
- EES (5)
- Ecodesign (5)
- Elastomeric seals (5)
- Electrocatalysis (5)
- End of life (5)
- Endlager Konrad (5)
- Engineered barrier (5)
- Engineered barrier systems (5)
- Erdgasnetz (5)
- Fallprüfung (5)
- Finite element analysis (5)
- GFK (5)
- GTR 13 (5)
- Gaseous hydrogen (5)
- Heat control (5)
- High-strength steels (5)
- Hydrogen Storage (5)
- Ignition source (5)
- Inspektion (5)
- Interface (5)
- Jet flame (5)
- KI (5)
- Kathodische Enthaftung (5)
- Konrad repository (5)
- Laminography (5)
- Lead (5)
- Maritime Atmosphäre (5)
- Markthochlauf (5)
- Marktüberwachung (5)
- Master Curve (5)
- Materials (5)
- Mechanochemistry (5)
- Metal seals (5)
- Micro solar cell (5)
- Molecular mobility (5)
- Monte-Carlo (5)
- Motor control (5)
- Neutron diffraction (5)
- Nitrogen (5)
- Numeric simulation (5)
- Optical fiber sensor (5)
- Organische Beschichtungen (5)
- P91 (5)
- PMSM (5)
- Physical phenomenology (5)
- Pipeline steel (5)
- Pipelines (5)
- Polymers of intrinsic microporosity (5)
- Power plant (5)
- Pressure assisted sintering (5)
- Pressure vessel (5)
- Pressure vessels (5)
- Qualitätssicherung (5)
- Range hood (5)
- Renewable energy (5)
- Repair welding (5)
- SEM (5)
- Sandwich (5)
- Seal performance (5)
- Seals (5)
- Servo drive (5)
- Shock absorber (5)
- SiO2 (5)
- Sicherheitsanforderungen (5)
- Sicherheitstechnische Kenngrößen (5)
- Slow burst test (5)
- Stress relief cracking (5)
- Structural stress approach (5)
- TAHYA project (5)
- Test method standard optimization (5)
- Thermal desorption analysis (5)
- Thermal radiation (5)
- Thermo-Mechanical Fatigue (5)
- Thermodynamische Simulation (5)
- Versalzung (5)
- Viscosity (5)
- Wind turbine rotor blades (5)
- Zündquellen (5)
- Acoustic emission analysis (4)
- Additive Manufacturing (4)
- Air conditioner (4)
- Alkali ions (4)
- Alkali-activated materials (4)
- Anerkennungen (4)
- BAM TTS (4)
- Batteries (4)
- Biodiesel (4)
- Biogas (4)
- Borehole probe (4)
- Burst test (4)
- C-OTDR (4)
- CFD (4)
- CIGSe (4)
- CNN (4)
- Carbon capture (4)
- Coatings (4)
- Coefficient of performance (4)
- Cold cracking safety (4)
- Compensation method (4)
- Component test (4)
- Composites (4)
- Consequence (4)
- Crack detection (4)
- Cracks (4)
- Creep-Fatigue (4)
- Data-fusion (4)
- Diffusion coefficient (4)
- Digital image correlation (4)
- Distributed sensor (4)
- Distributed strain sensing (4)
- Druck-Volumen-Produkt (4)
- Dual purpose cask (4)
- Ductile Cast Iron (4)
- Dunstabzugshauben (4)
- Electrical Energy Storage (4)
- Electrochemical impedance spectroscopy (4)
- Electromagnetic scattering (4)
- Engineered Barrier System (EBS) (4)
- Erdgas (4)
- Ermüdung (4)
- Extended Interim Storage (4)
- Fallprüfungen (4)
- Faseroptische Sensorik (4)
- Fiber optic sensor (4)
- Fiber optic sensors (4)
- Fibre-optic sensing (4)
- Fire testing (4)
- Fracture mechanics (4)
- Fuel Cells (4)
- Fuel cells (4)
- Fuel cladding (4)
- Fuel rod (4)
- Full-scale (4)
- GD-OES (4)
- Gefügedegradation (4)
- Geführte Ultraschallwellen (4)
- Geothermie (4)
- Grouted connection (4)
- Gusseisen mit Kugelgraphit (4)
- HR-CS-AAS (4)
- High-strength concrete (4)
- High-strength structural steels (4)
- Hochfest (4)
- Hochradioaktive Abfälle (4)
- Hollow specimen (4)
- Hollow specimen technique (4)
- Hydrogen-enriched natural gas (4)
- Impurities (4)
- Inspection planning (4)
- Irradiation (4)
- Kerbschlagzähigkeit (4)
- Kreislaufwirtschaft (4)
- LTT (4)
- LTT (Low Transformation Temperature) (4)
- Laser-induced forward transfer (LIFT) (4)
- Lebensdauervorhersage (4)
- Light concentration (4)
- Liquid Hydrogen (4)
- Lithium Batterien (4)
- Load cycles (4)
- Load-based testing (4)
- Localized corrosion (4)
- Low temperature behavior (4)
- Mechanical properties (4)
- MefHySto (4)
- Membranes (4)
- Mesoporous iridium oxide films (4)
- Metrology (4)
- Modalanalyse (4)
- Modifizierter Sprühlichtbogen (4)
- Monte-Carlo-Experiment (4)
- Multilayer (4)
- Near-service testing (4)
- Neutron scattering (4)
- Offshore Wind (4)
- Offshore wind turbine (4)
- PIM-1 (4)
- Package design (4)
- Partial discharge (4)
- Passive thermography (4)
- Perfluorinated polymer optical fiber (4)
- Phased array technique (4)
- Pipeline transport (4)
- Pitting corrosion (4)
- Plasma-transferred arc welding (4)
- Polymer optical fibers (4)
- Porosity (4)
- Post weld heat treatment (4)
- Predisposal (4)
- Pressure (4)
- Production scatter (4)
- Propane (4)
- Prüffristenfestlegung (4)
- QI-Digital (4)
- RAM packages (4)
- RPT (4)
- Radioactive waste containers (4)
- Rayleigh scattering (4)
- Review (4)
- Ring compression test (4)
- Rotorblatt (4)
- SAFT (4)
- Salzbeton (4)
- Schallemissionsanalyse (4)
- Schallemissionsprüfung (4)
- Seasonal performance (4)
- Sensors (4)
- Shell Buckling (4)
- Silicon (4)
- Single-sinker densimeter (4)
- Soil-structure interaction (4)
- Spent Fuel Characterization (4)
- Statistics (4)
- Streuung (4)
- Supercritical/dense phase CO2 (4)
- Survival rate (4)
- Tank (4)
- Technological innovation system (4)
- Thermal test (4)
- Thermisches Ausfugen (4)
- Thermo-mechanical fatigue (4)
- Time dependent effects (4)
- Transport cask (4)
- Transportation (4)
- Type-B Package (4)
- Ultrasonic guided waves (4)
- Ultrasonic imaging (4)
- Value of information (4)
- Varestraint test (4)
- Varestraint-Test (4)
- Verteilte faseroptische akustische Sensorik (4)
- Wear (4)
- Wiederkehrende Prüfung (4)
- Wind Energy (4)
- Wind turbine (4)
- Zulassung (4)
- AAM (3)
- ATEX (3)
- Abbildungsverfahren (3)
- Abdichtbauwerk (3)
- Acceleration (3)
- Aging management (3)
- Al2O3 (3)
- Alkali-activated material (3)
- Ansys Autodyn (3)
- Arrhenius (3)
- Artificial neural networks (3)
- Ausnahmegenehmigungen (3)
- BAMline (3)
- Back end (3)
- Bar length (3)
- Basic population (3)
- Berstfestigkeit (3)
- Bolt connections (3)
- Box-Behnken (3)
- Brennelementverhalten (3)
- Buckling (3)
- CCU (3)
- Calcination (3)
- Carbon (3)
- Carbon capture storage (3)
- Carrier gas hot extraction (3)
- Cask (3)
- Circular economy (3)
- Circumvention (3)
- Climate change (3)
- Cohesive Zone Modelling (3)
- Combustion (3)
- Compaction Grouting (3)
- Competent authority (3)
- Compression (3)
- Computed tomography (3)
- Condensate (3)
- Confidence level (3)
- Continuously inhomogeneous soils (3)
- Copper-indium-gallium-diselenide (3)
- Corrosion protection (3)
- Cracking (3)
- Creep-fatigue (3)
- Cycle strength (3)
- Deep foundations (3)
- Delfin (3)
- Density data (3)
- Design methods (3)
- Deterioration (3)
- Digitalisierung (3)
- Discharge (3)
- Distributed vibration sensing (3)
- Drucker-Prager (3)
- Dual Purpose Casks (3)
- Duplex stainless steel (3)
- Dynamic Fracture Toughness (3)
- Dynamic Tensile Test (3)
- Editorial (3)
- Electrolysis (3)
- Endlagerung (3)
- Energiespeicher (3)
- Energy (3)
- Energy storage (3)
- Engineered barriers (3)
- Equation of state (3)
- Evaporite rock (3)
- Experience feedback list (3)
- Experimental testing (3)
- FAME (3)
- Failure (3)
- Failure rate (3)
- Faseroptische Sensoren (3)
- Faseroptischer Strahlungssensor (3)
- Fe-N-C catalysts (3)
- Femtosecond laser patterning (3)
- Fibre optic sensors (3)
- Final disposal container (3)
- Final repository Konrad (3)
- Finite element methods (3)
- Finite-difference time-domain calculations (3)
- Finite-element boundary-element method (3)
- Fly ash (3)
- Foundations (3)
- Fracture Mechanics (3)
- Fracture initiation (3)
- Freileitung (3)
- Freistrahlflamme (3)
- Fuel cell (3)
- Fuel cell vehicles (3)
- GFRP (3)
- Gas analysis (3)
- Gas distribution mapping and gas source localization (3)
- Gas separation membranes (3)
- Gasanalytik (3)
- Gefahrgutverpackungen (3)
- Glas (3)
- Glass ceramic (3)
- Glass composition (3)
- Grouting (3)
- HAZ-softening (3)
- HR-CS-MAS (3)
- Hard X-ray photoelectron spectroscopy (HAXPES) (3)
- Heat flux (3)
- Heat pumps (3)
- Heat storage (3)
- Heat treatment (3)
- High-strength Steels (3)
- High-strength structural steel (3)
- Hochaktive wärmeentwickelnde Abfälle (3)
- Hochspannung (3)
- Hot cell testing (3)
- Hydride precipitation (3)
- Hydrogen diffusion (3)
- Hydrogen economy (3)
- Hydrogen measurement (3)
- Hydrogen permeation (3)
- Hydrogen trapping (3)
- IAEA Regulations (3)
- ISO (3)
- ISO 3690 (3)
- Isotope (3)
- Isotopes (3)
- Katastrophe (3)
- Kavernenspeicher (3)
- Konsequenzbegrenzung (3)
- Korrosionsschutz (3)
- LIBS (3)
- Large scale testing (3)
- Laser-induced forward transfer (3)
- Laserschweißen (3)
- Lastwechselprüfung (3)
- Layered soils (3)
- Leak detection (3)
- Leckdetektion (3)
- Li-ion battery (3)
- Lightweight materials (3)
- Lithium batteries (3)
- Lithium isotope (3)
- Lithium-Batterien (3)
- Local fatigue approaches (3)
- Long-term behaviour (3)
- Low cycle fatigue (3)
- Lucky punch area (3)
- Machining (3)
- Maintenance (3)
- Manufacturing (3)
- Market surveillance (3)
- Master Curve Concept (3)
- Measurement (3)
- Metakaolin (3)
- Metal-organic-frameworks (3)
- Metrologie (3)
- Metrologie zur Wasserstoffspeicherung (3)
- Micro-concentrator solar cell (3)
- Microalloying influences (3)
- Minimum burst ratio (3)
- ModuH2Pipe (3)
- Monopiles (3)
- Monte-Carlo Simulation (3)
- Nanoconfinement (3)
- Natural gas (3)
- Natural gas mixtures (3)
- Neutron imaging (3)
- Niobium (3)
- Non-destructive operando analysis (3)
- Nondestructive testing (3)
- Nuclear (3)
- Nuclear Fuel Cladding (3)
- Nuclear fuel (3)
- Nuclear fuel cycle (3)
- Nuclear waste management (3)
- Nuclear waste repositories (3)
- Numerical Failure Analysis (3)
- O-Ring (3)
- O-ring (3)
- OFDR (3)
- Offshore Pile Foundation (3)
- Offshore Windenergie (3)
- Offshore foundations (3)
- Offshore geomechanics (3)
- Optical fiber sensors (3)
- Ortsauflösende Fasersensorik (3)
- Oxygen reduction reaction (3)
- PFAS (3)
- POD (3)
- POSS (3)
- Packaging (3)
- Partial release (3)
- Permeability (3)
- Pfahlgründungen (3)
- Photocatalysis (3)
- Physical aging (3)
- Physical testing (3)
- Pile bending stiffness (3)
- Pile foundation (3)
- Plastic Instability (3)
- Polyethylene (3)
- Post-impact evaluation (3)
- Power-to-Gas (3)
- Predictive maintenance (3)
- Pressure build-up (3)
- Probabilistischer Ansatz (3)
- Quality Infrastructure (3)
- Quantum yield (3)
- Radiation sensing fibers (3)
- Radioactive Waste (3)
- Radioactive waste container (3)
- Radioactive waste disposal (3)
- Radioaktiv (3)
- Radiographie (3)
- Recovery (3)
- Relaxation (3)
- Representative volume element (3)
- Residual Stresses (3)
- Retention (3)
- Rotorblätter (3)
- Sample Performance Chart (3)
- Scarf repairs (3)
- Scatter (3)
- Schadensdetektion (3)
- Schallemission (3)
- Screening (3)
- Sediment (3)
- Sensitivity analysis (3)
- Smoldering (3)
- Soil stiffness (3)
- Soil test field (3)
- Sol-gel coating (3)
- Solar cell (3)
- Solar energy (3)
- Solubility (3)
- Spectroscopic imaging ellipsometry (3)
- Sprödbruch (3)
- Stahl (3)
- Steel structures (3)
- Strahlenschutz (3)
- Strahlungsinduzierte optische Dämpfung (3)
- Strain measurement (3)
- Stress relaxation (3)
- Structural Health Monitoring (SHM) (3)
- Structural integrity management (3)
- Studie (3)
- Suction bucket (3)
- Superaustenite steel (3)
- Supercapacitor (3)
- TP (3)
- Target (3)
- Technical crack detection (3)
- Technological innovation system (TIS) (3)
- Technology interaction (3)
- Tempered Martensite Ferritic Steels (3)
- Texture (3)
- Thermal Test (3)
- Thermal testing (3)
- Thermoelectric oxide (3)
- Thermographic inspection (3)
- Transformation products (3)
- Transmission electron microscopy (3)
- Transport Package (3)
- Trunnion (3)
- Ultraschall-Echoverfahren (3)
- Underground (3)
- Upconversion (3)
- Utilization (3)
- Verschlussbauwerk (3)
- Water-bearing glasses (3)
- Wind energy tower (3)
- Wind turbine blade shells (3)
- Wind turbine rotor blade (3)
- Windenergy (3)
- Wärmestrahlung (3)
- X-ray absorption spectroscopy (3)
- Zustandsüberwachung (3)
- Zündenergie (3)
- corrosion (3)
- (U)HMWPE (2)
- 1-m-punch-bar-drop-test (2)
- 3-axis gimbal (2)
- 3D imaging (2)
- AI (2)
- ASTM E1921 (2)
- Abfälle (2)
- Abgasanlage (2)
- Accelerated ageing (2)
- Accelerometer (2)
- Accident Scenario (2)
- Acoustic emission monitoring (2)
- Acoustic emission testing (2)
- Advanced experimental (2)
- Aerial platform (2)
- Ageing management (2)
- Ageing mechanisms (2)
- Akzeptanz (2)
- Alkali zinc borate glasses (2)
- Alternative Antriebe (2)
- Alumina (2)
- Aluminiumoxid (2)
- Anaerobic digestion (2)
- Analysis (2)
- Analysis of variance (2)
- Anemometer (2)
- Anerkennung (2)
- Anode (2)
- Arc Welding Automation (2)
- Arc welding automation (2)
- Artificial Intelligence (2)
- Assessment method (2)
- Atmospheric Corrosion (2)
- Atmosphärische Korrosion (2)
- Atomic packing factor (2)
- Aufgelöste Tragstrukturen (2)
- Aufmischung (2)
- Aufprallfundament (2)
- Austenit (2)
- Auswirkungsbetrachtung (2)
- Automatisierte Fertigung (2)
- BEV (2)
- Batterie (2)
- Bayes'sche Analyse (2)
- Bayesian System Identification (2)
- Behälterbau (2)
- Behälterversagen (2)
- Behälterwerkstoff (2)
- Belastungsversuch (2)
- Bemessung (2)
- Berstdruck (2)
- Berstprüfung (2)
- Bescheid (2)
- Betriebsmittelüberwachung (2)
- Binary mixture (2)
- Binary mixtures CO2 + O2 (2)
- Biobrennstoff (2)
- Bohrlochsonde (2)
- Bolt design (2)
- Borate (2)
- Borehole (2)
- Boson peak (2)
- Brittle Fracture (2)
- Brittle fracture (2)
- Burning (2)
- Burst ratio (2)
- CFRP (2)
- CO2 Reduktion (2)
- CO2 quality (2)
- COPV (2)
- CTOD (2)
- CTS (2)
- Calciumcobaltit (2)
- Calorimeter (2)
- Calorimetric test (2)
- Calorimetry (2)
- Capture (2)
- Carbon capture and storage (2)
- Carbon capture utilization (2)
- Carbon fibers (2)
- Carbon fibre (2)
- Catastrophe (2)
- Cement (2)
- Cemented waste (2)
- Chalcogenides (2)
- Chemical Analysis (2)
- Chemical analysis (2)
- Co-Cr-alloy (2)
- Coherent Rayleigh OTDR (2)
- Compaction grouting (2)
- Component testing (2)
- Composite Overwrapped Pressure Vessel (2)
- Composite cylinders (2)
- Composite structures (2)
- Composite-Druckgefäße (2)
- Compression Set (2)
- Compressive Cyclic loading (2)
- Compressive cyclic loading (2)
- Computed tomography (CT) (2)
- Computer Tomography (2)
- Computer Vision (2)
- Computer-Tomographie (2)
- Consequneces (2)
- Container for radioactive waste (2)
- Contour method (2)
- Convection coefficient (2)
- Cooking fume extractor (2)
- Copper indium gallium diselenide (CIGSe) (2)
- Corrosion Testing (2)
- Corrosion resistance (2)
- Country comparison (2)
- Crack Luminescence (2)
- Crack formation (2)
- Crack growth velocity (2)
- Crack intensity factor (2)
- Crack pattern (2)
- Crack resistance curve (2)
- Creep resisting materials (2)
- Crosslinking (2)
- Cryogenic tank (2)
- Crystallization (2)
- Cu(In,Ga)Se2 (2)
- Cyclic load (2)
- Cyclic softening (2)
- Cylindrical Cask (2)
- DCB (2)
- DLO (2)
- DMA (2)
- DPC (2)
- Damage (2)
- Damage localization (2)
- Damping concrete (2)
- Dangerous goods (2)
- Data fusion (2)
- Decision theory (2)
- Defects (2)
- Density (2)
- Design (2)
- Design approval (2)
- Dielectric spectroscopy (2)
- Digital twin (2)
- Digitalisation (2)
- Digitalization (2)
- Digitization (2)
- Direct laser interference patterning (DLIP) (2)
- Direct laser-interference patterning (DLIP) (2)
- Discotic Liquid Crystals (2)
- Discotic liquid crystals (2)
- Distribution function (2)
- Divergente Ausbildung der Wärmeeinflusszone (2)
- Double cantilever beam (2)
- Downburst (2)
- Drop (2)
- Drop tests (2)
- Druckbehältern (2)
- Druckgefäße (2)
- Druckspeicher (2)
- Dual Purpose Cask (2)
- Duplex steel (2)
- Durability (2)
- Dynamic Test Method (2)
- Dynamic impact tests (2)
- Dynamic loading (2)
- Dynamic test method (2)
- Dynamische Bruchzähigkeit (2)
- Dynamische Prüfung (2)
- ECE R134 (2)
- EDX (2)
- EMPIR (2)
- EU-Recht (2)
- Ectrocatalysis (2)
- Efficiency in transportation (2)
- Elastomer seal (2)
- Electrical conductivity (2)
- Electrochemical characterization (2)
- Electrochemical deposition (2)
- Electrochemical permeation (2)
- Electron Microscopy (2)
- Electron microscopy (2)
- Embedded sensors (2)
- Emission (2)
- Encapsulation (2)
- Energie Label (2)
- Energieeffizeinz (2)
- Energy Label (2)
- Energy carrier (2)
- Energy harvesting (2)
- Energy systems (2)
- Energy-Label (2)
- Environment (2)
- Ermüdungsfestigkeit (2)
- Experimental investigation (2)
- Explosion limits (2)
- Explosion safety (2)
- Extrapolation (2)
- F-N-curve (2)
- F-N-diagram (2)
- FE-Berechnungen (2)
- FEM simulations (2)
- FIB (2)
- FSW (2)
- FTIR (2)
- Failure analysis (2)
- Fallversuch (2)
- Faser-Kunststoff-Verbunde (2)
- Faseroptik (2)
- Fasersensorik (2)
- Faserverbund (2)
- Faserverbundwerkstoffe (2)
- Fatigue life (2)
- Fatigue of sandwich shell structures (2)
- Fatigue strength (2)
- Feinkornbaustahl (2)
- Fettabscheidegrad (2)
- Fiber Bragg gratings (2)
- Fiber reinforced polymer (2)
- Fiber-reinforced plastics (2)
- Fiberoptic sensors (2)
- Fibre optic sensing (2)
- Field conditions (2)
- Finite Element Simulation (2)
- Finite Elemente Simulation (2)
- Fire Qualification (2)
- Fire Test Stand (2)
- Flammability (2)
- Fluorine (2)
- Fuel cladding integrity (2)
- GMA welding (2)
- GMAW (2)
- Gamma radiation monitoring (2)
- Gas detection (2)
- Gas explosion (2)
- Gas generation (2)
- Gas permeation (2)
- Gas release (2)
- Gasausbreitung (2)
- Gasetagenheizungen (2)
- Gassensor (2)
- Gasspeicher (2)
- Gaswolkenexplosion (2)
- Generalized plasticity (2)
- Geopolymer (2)
- Glass structure (2)
- Glass transition (2)
- Glass-ceramics (2)
- Graduate School (2)
- Graphene (2)
- Gravimetric preparation (2)
- Grout-Verbindung (2)
- Grouted Connection (2)
- Grouted connections (2)
- Großer Fallturm Horstwalde (2)
- Guide (2)
- Guided Waves (2)
- Guided waves (2)
- H2 (2)
- H2 Fire (2)
- HAZ-Softening (2)
- HTLS (2)
- Halbleiterphysik (2)
- Hardness (2)
- Hazardous areas (2)
- Heat flux sensor (2)
- Heizkessel (2)
- Heizöl (2)
- Heißrisse (2)
- High entropy alloy (2)
- High impact shock application (2)
- High level waste (2)
- High temperature corrosion (2)
- High temperature low sag conductors (2)
- High-Pressure Gaseous Hydrogen (2)
- High-pressure density (2)
- High-strength filler metals (2)
- High-temperature corrosion (2)
- Hochdruck (2)
- Hochspannungsanlagen (2)
- Hollow-specimen (2)
- Hopkinson bar (2)
- Hot pressing (2)
- Hybrid cements (2)
- Hybrid composite pressure vessel (2)
- Hybrid laser arc welding (2)
- Hydraulic tests (2)
- Hydraulische Prüfeinrichtung (2)
- Hydrogen Trade (2)
- Hydrogen degradation (2)
- Hydrogen permeability (2)
- Hydrogen sensors (2)
- Hydrogen transport (2)
- Hydrogen transport in pipelines (2)
- Hydrogen vehicles (2)
- Härteprüfung nach Vickers (2)
- Höchstspannungsanlage (2)
- IAEA Fire (2)
- IAEA Regu-lations (2)
- IAEA Thermal Test (2)
- Ignition (2)
- Image analysis (2)
- Immunoassay (2)
- Impact angle (2)
- Imperfektion (2)
- In-service (2)
- Indium (2)
- Industriegüter (2)
- Infrastructure monitoring (2)
- Infrastrukturmonitoring (2)
- Injection Sequence (2)
- Integrity management (2)
- Internal gaps (2)
- Inverse problem (2)
- Inverter-type Air Conditioner (2)
- Isotope analysis (2)
- J-integral (2)
- JLH (2)
- Jacket Support Structures (2)
- Jacket support structure (2)
- Joint capacity (2)
- Kabelmonitoring (2)
- Kikuchi (2)
- Knowledge and Technology Transfer (2)
- Knowledge and technology transfer (2)
- KorroPad (2)
- Künstliche Intelligenz (2)
- Laboratory Container (2)
- Lagerung (2)
- Laminographie (2)
- Langsame Berstprüfung (2)
- Large Aperture Ultrasonic System (LAUS) (2)
- Laser Doppler Vibrometer (2)
- Laser beam welding (2)
- Laser-induced oxide layer (2)
- Lattice parameters (2)
- Leakage detection (2)
- Lebensdauer (2)
- Lebensdauerversuche (2)
- Lebensdauerüberwachung (2)
- Leckagerate (2)
- Legacy waste (2)
- Leichtbau (2)
- Leitfaden (2)
- Length of puncture bar (2)
- Levelized cost of energy (2)
- Life time determination (2)
- Lifetime (2)
- Lifetime prediction (2)
- Lightweight Design (2)
- Linear sensor (2)
- Liquefied Natural Gas (2)
- Liquid hydrogen (2)
- Liquid hydrogen (LH2) (2)
- Lithium battery (2)
- Load attachment (2)
- Localization of gas sources (2)
- Long-term loading (2)
- Long-term shrinkage (2)
- Low Cycle Fatigue (2)
- Low and medium level radioactive waste (2)
- Länge (2)
- Magnesia shotcrete (2)
- Magnesium chloride (2)
- Management (2)
- Marine Corrosion (2)
- Marktüberwachung Onlinehandel Webcrawler (2)
- Mast (2)
- Master curve (2)
- Material model (2)
- Materialkompatibilität (2)
- Materials technology (2)
- Measurement methods (2)
- Mechanical Engineering (2)
- Mechanical assessment (2)
- Mechanical sparks (2)
- Mechanik (2)
- Mechanism (2)
- Membrane-based linear gas sensor (2)
- Metallic seal (2)
- Metals and Alloys (2)
- Methane (2)
- Methodology (2)
- Micro silica (2)
- Micro solar cells (2)
- Micromechanical model (2)
- Microstructure characterization (2)
- Mikrolegierungseinflüsse (2)
- Minimum Waiting Time (2)
- Mix design (2)
- Mixed formulation (2)
- Mobile Robot Olfaction (2)
- Modeling (2)
- Modification of structural morphology (2)
- Monte Carlo Simulation (2)
- Monte Carlo simulation (2)
- Multicopter (2)
- Multilayer technology (2)
- Multilayertechnik (2)
- Nachhaltigkeit (2)
- Nageltest (2)
- Nanophotonics (2)
- Nanophysik (2)
- Neuronales Netzwerk (2)
- Neutron Scattering (2)
- Neutron shielding (2)
- New package design (2)
- Ni-base superalloy (2)
- Ni-based alloy (2)
- NiCr25FeAlYB (2)
- Nickel based alloys (2)
- Niobium carbide (2)
- Non destructive testing (2)
- Non-Destructive Evaluation (2)
- Non-approved (2)
- Non-equilibrium thermodynamics (2)
- Non-synoptic wind event (2)
- Normspaltweite (2)
- Nuclear waste (2)
- Nuclear waste disposal (2)
- Numerical approach (2)
- Numerical simulations (2)
- Numerische Strömungsmechanik (2)
- Offshore Wind Energy (2)
- Offshore Windenergy Pile Buckling (2)
- Offshore geotechnics (2)
- Offshore steel grade (2)
- Offshore wind energy converter (2)
- On-site inspection (2)
- Optical sensing and sensors (2)
- Optimal Sensor Placement (2)
- Optische Fasern (2)
- Optoelektronik (2)
- Overhead transmission line (2)
- Oxyfuel (2)
- PGM-free catalysts (2)
- PV module (2)
- Package testing (2)
- Parallel-Seismik (2)
- Perfluorinated polymer optical fibres (2)
- Permeation (2)
- Perovskite (2)
- Pfahl (2)
- Phase transformation (2)
- Photon counting detector (2)
- Photovoltaic (2)
- Photovoltaics (2)
- Piezoelectricity (2)
- Piezopolarisation (2)
- Piezoresistive accelerometer (2)
- Pile Tip Buckling (2)
- Pipeline network (2)
- Plastic optical fibers (2)
- Polycarbonate (2)
- Polymer Testing (2)
- Polymer electrolyte membrane fuel cell (2)
- Polymer of intrinsic microporosity (2)
- Polymers (2)
- Porous materials (2)
- Pouch cell (2)
- Power cable monitoring (2)
- Predis (2)
- Pressure tanks (2)
- Pressure wave (2)
- Pressure-assisted sintering (2)
- Pressure-volume product (2)
- Prevention (2)
- Probabilistic approach (2)
- Probability of Detection (2)
- Process control (2)
- Produktprüfungen (2)
- Propagation (2)
- Propane gas fire (2)
- Propane gas fire test facility (2)
- Properties (2)
- Protective coating (2)
- Prüfung (2)
- Prüfverfahren (2)
- Pulsed thermography (2)
- Pultruded fibre rods (2)
- Puncture bar test (2)
- Pyrolysis (2)
- QI Digital (2)
- Quality infrastructure (2)
- Quantum mechanics (2)
- Quasi-distributed sensing (2)
- Querzugversuch (2)
- RFID (2)
- RFID technology (2)
- Radial hydrides (2)
- Radioactive Materials (2)
- Radioaktive (2)
- Radioaktive Abfälle (2)
- Raman spectroscopy (2)
- Rapid Phase Transition (2)
- Rapid phase transition (2)
- Ratio refinement (2)
- Ray tracing (2)
- Reaction sintering (2)
- Reaction-sintering (2)
- Real Use Behavior (2)
- Real target (2)
- Recycling (2)
- Rehabilitation (2)
- Renewable fuels (2)
- Renewables (2)
- Repair-welding (2)
- Reparability (2)
- Repowering (2)
- Requalification (2)
- Research (2)
- Research and innovation (2)
- Resistance (2)
- Restraint (2)
- Risiko (2)
- Risikoanalyse (2)
- Risikosteuerung (2)
- Rotor blade (2)
- Rotor blades (2)
- Round Robin Test (2)
- Round robin test (2)
- Rückbau kerntechnischer Anlagen (2)
- S31266 (2)
- S31803 (2)
- SCO-III (2)
- SHPB (2)
- SNF (2)
- SSR-6 (2)
- Safety Assessment (2)
- Safety engineering (2)
- Safety requirements (2)
- Salt concrete (2)
- Sample size (2)
- Sand (2)
- Schlagfunken (2)
- Schmiedestahl (2)
- Schornstein (2)
- Schweißen von hochfesten FKB (2)
- Schweißnaht (2)
- Schwingungsbasierte Verfahren (2)
- Schwingungsdynamik (2)
- Sea (2)
- SealWasteSafe project (2)
- Sealing structures (2)
- Seasonal Performance Factor (2)
- Secondary impact (2)
- Seilschwingung (2)
- Self-organization (2)
- Semiconductor (2)
- Semiconductor nanostructures (2)
- Sensing (2)
- Sensor (2)
- Sensor testing (2)
- Sensorik (2)
- Sequential analysis (2)
- Shear keys (2)
- Ship (2)
- Shotcrete (2)
- Sibayak (2)
- Sicherer Umgang (2)
- Sicherheitstechnik (2)
- Signal processing (2)
- Silicon dioxide (2)
- Silver (2)
- Silver diffusion (2)
- Silver metallization paste (2)
- Silver-glass-metallization-paste (2)
- Single-atom catalysts (2)
- Sinter additive (2)
- Sintering additives (2)
- Size effect (2)
- Slenderness effect (2)
- Smoke gas emission (2)
- Soil-Structure-Interaction (2)
- Sol-Gel (2)
- Solid electrolytes (2)
- Solid-state batteries (2)
- Solid-state-reaction (2)
- Spar cap design (2)
- Special encapsulation (2)
- Spectroscopy (2)
- Speed of sound (2)
- Spent fuel characterisation (2)
- Spent fuel characterization (2)
- Spent fuel performance (2)
- Spontane Polarisation (2)
- Spontaneous polarization (2)
- Spruce (2)
- Standing Losses (2)
- Static load (2)
- Statistical Analysis (2)
- Statistical assessment (2)
- Statistische Auswertung (2)
- Statistische Bewertung (2)
- Stichprobenprüfung (2)
- Storage cask (2)
- Stowage (2)
- Strengthening strategy (2)
- Structural reliability (2)
- Structure-property relationship (2)
- Struktur-Eigenschaftsbeziehung (2)
- Substructures (2)
- Sulfidation (2)
- Super-austenitic stainless steel (2)
- Superconductivity (2)
- Supplementary cementitious materials (2)
- Surface modification (2)
- Surface oxidation (2)
- Surveillance (2)
- Synchrotron X-ray computed tomography (2)
- Synchrotron radiation (2)
- TAHYA Project (2)
- Technological Innovation System (2)
- Technology Gap Theory (2)
- Temperature (2)
- Temperature characteristics (2)
- Temperature sensing (2)
- Tensile Capacity (2)
- Tensile Test (2)
- Tensile capacity (2)
- Test (2)
- Tetrapyrrolic Fe–N–C powders (2)
- Thermal cycling (2)
- Thermal package testing (2)
- Thermal runaways (2)
- Thermo-Calc (2)
- Thermo-mechanische Ermüdung (2)
- Thermoelectric (2)
- Thermoelectric generator (2)
- Thermoelectric oxides (2)
- Thermoelektrika (2)
- Thermogravimetric analysis (2)
- Thick-walled (2)
- Thin film (2)
- Thin films (2)
- Ti6Al4V alloy (2)
- TiO2 (2)
- Tiefkalt (2)
- Tightness (2)
- Time-of-flight secondary ion mass spectrometry (ToF-SIMS) (2)
- Time-temperature superposition (2)
- Titanium (2)
- Titanium alloy (2)
- Tomographic reconstruction of gas plumes (2)
- Tragstrukturen (2)
- TransHyDE (2)
- Transmission electron microscopy (TEM) (2)
- Transport Packages (2)
- Transport and storage cask (2)
- Transport of dangerous goods (2)
- Transport of radaioactive materials (2)
- Transport of radioactive materials (2)
- Transport safety (2)
- Transport- und Lagerbehälter (2)
- Trapping (2)
- Tribologie (2)
- Trunnions (2)
- Trustworthy Hydrogen (2)
- Tumble dryer (2)
- Tunable Diode Laser Absorption Spectroscopy (TDLAS) (2)
- Typ-B (2)
- UP-Schweißen (2)
- Ultrashort laser processing (2)
- Ultrashort laser pulses (2)
- Ultrasonic (2)
- Uncertainty (2)
- Unterraummethoden (2)
- Uranium hexafluoride (2)
- Value of Information (2)
- Valve (2)
- Varestraint (2)
- Verbundwerkstoffe (2)
- Verflüssigtes Erdgas (2)
- Verteilte Fasersensorik (2)
- Verteilte akustische Sensorik (2)
- Verwaltungsakt (2)
- Vickers hardness (2)
- Vickers indentation (2)
- Virial coefficients (2)
- Volumetric data (2)
- WAXD (2)
- WEZ Erweichung (2)
- Wassersoff (2)
- Wasserstofferzeugung (2)
- Waste management (2)
- Waste package (2)
- Water splitting (2)
- Weibull Distribution (2)
- Weld metal (2)
- Weldability (2)
- Wind turbine blade (2)
- Wind turbine support structure (2)
- Wind turbine tower (2)
- Windenergie anlage rotorblätte (2)
- Wire Arc Additive Manufacturing (2)
- Wärmepumpen (2)
- X-ray laminography (2)
- X-ray photoelectron spectroscopy (2)
- X-ray tomography (2)
- X8NiCrSi38-18 (2)
- XANES (2)
- XAS (2)
- Yielding target (2)
- Zertifikate (2)
- ZfP (2)
- Zulassungskriterium (2)
- analysis techniques (2)
- cylinders (2)
- degradation (2)
- depth-profiling (2)
- encapsulation (2)
- fluorine (2)
- hochradioaktive Abfälle (2)
- pV-Produkt (2)
- polymer encapsulant (2)
- probabilistic approach (2)
- radiation dosimetry (2)
- solar cells (2)
- structural health monitoring (2)
- thermal excitation (2)
- thermographic inspection (2)
- wind turbine rotor blade (2)
- µCT (2)
- Überlebenswahrscheinlichkeit (2)
- (Hard) X-ray Photoelectron Spectroscopy (1)
- 100Cr6 (1)
- 150 Jahre BAM (1)
- 1D-Simulation (1)
- 2D materials (1)
- 3D Laser Scanning (1)
- 3D glass structure model (1)
- 3D reconstruction (1)
- 3D-Rekonstruktion (1)
- 8.6 (1)
- 9% Ni Steel (1)
- 9-12% Cr ferritic-martensitic steels (1)
- AAS (1)
- ACT (1)
- ADR 2019 (1)
- AISI 304L (1)
- AKR, Betonfahrbahndecke, Tausalzeintrag, Innenhydrophobierung (1)
- ALD (atomic layer deposited) (1)
- ASME (1)
- ATEX rules (1)
- ATR Anerkanntes Technisches Regelwerk (1)
- Ab initio (1)
- Ab initio Simulation (1)
- Ab initio simulations (1)
- Ab initio thermodynamics (1)
- Abbruch (1)
- Abdichtbauwerk / Verschlussbauwerk (1)
- Absolute adsorption (1)
- Absolute fluorescence (1)
- Absorber optimization (1)
- Abuse Tests (1)
- Abuse testing (1)
- Acceleration values (1)
- Acceptance criteria (1)
- Acceptance of a standard (1)
- Acceptance of failure rates (1)
- Accident Conditions of Transport (1)
- Accidental loads (1)
- Accidental scenarios (1)
- Accurate-Numerical-Methods (1)
- Acidic oxygen evolution reaction (1)
- Acids (1)
- Acoustic Emission (1)
- Acoustic resonance (1)
- Acoustic resonator (1)
- Acoustic virial coefficients (1)
- Activation energy (1)
- Active site density (1)
- Active-Site Quantification (1)
- Activity release (1)
- Additive (1)
- Additiver Fertigung (1)
- Adiabatic calorimeter (1)
- Adiabatic surface temperature (1)
- Adjustment calculation (1)
- Adsorption (1)
- Advanced material (1)
- Advisement (1)
- Aerodynamic damping (1)
- Aerodynamics (1)
- Affinity chromatography (1)
- Affinitätschromatographie (1)
- Aging Mechanisms (1)
- Aging mechanisms (1)
- Air Conditioner (1)
- Air Conditioners (1)
- Air pollution (1)
- Air-conditioning (1)
- Aktive Thermographie (1)
- Aktivitätsfreisetzung (1)
- Akustische Emission (1)
- Akzeptanzrate (1)
- Akzeptanzwahrscheinlichkeit (1)
- Algorithms (1)
- Alkali aktiviertes Material (1)
- Alkali metal anodes (1)
- Alkali metal batteries (1)
- Alkali zinc borate glass (1)
- Alkali-Activated Material (1)
- Alkali-activated materia (1)
- Alkali-aktiviertes Material (1)
- Alkaline Oxygen (1)
- All solid-state battery (1)
- All-solid-state batteries (1)
- Alloy concept (1)
- Alloys (1)
- Aln (1)
- Alternative Energieformen (1)
- Alternative Energy Sources (1)
- Alumina coating (1)
- Alumina coatings (1)
- Aluminosilicate glasses (1)
- Aluminum seal (1)
- Ammonia (1)
- Ammonia safety (1)
- Amorphization (1)
- Amoxicillin (1)
- Anaerobic pathways (1)
- Analysis of wormholes (1)
- Analysis technique (1)
- Analytical Design Methods (1)
- Analytical calculation (1)
- Analytik (1)
- Anderson Darling - GoF Test (1)
- Anforderungen (1)
- Angle of attack oscillations (1)
- Anhydrit (1)
- Anlagenbau (1)
- Anlagensicherheit (1)
- Anodization (1)
- Ansprechzeit (1)
- Antenna effect (1)
- Anti-Corrosion (1)
- Antibody (1)
- Anticorrosion (1)
- Antragstellung (1)
- Antragsverfahren (1)
- Application (1)
- Application properties (1)
- Approval (1)
- Approval certificate (1)
- Approved packages (1)
- Aqueous dispersion (1)
- Aquifer fluid (1)
- Arbeitsbereichs "Themenfeld Energie Gase" (1)
- Arbeitsflussdiagramm (1)
- Aromatic amino acid analysis (1)
- Aromatics (1)
- Aromatische Aminosäureanalyse (1)
- Arrhenius equation (1)
- Artifical aging (1)
- Artificial Sea Water (1)
- Artificial ageing (1)
- Artificial intelligence (1)
- Artificial neural network (1)
- Ash content (1)
- Associated incidental substances (1)
- Atemluftflaschen (1)
- Atemschutz (1)
- Atom catalysts (1)
- Atomic Absorption Spectrometry (1)
- Atomic absorption spectrometry (1)
- Atomic layer deposition (1)
- Atomistic model (1)
- Atomistic models (1)
- Aufbereitung (1)
- Auslegungslebensdauer (1)
- Auslegungsüberschreitend (1)
- Ausscheidung (1)
- Ausscheidungsverhalten (1)
- Aussonderugnsrate (1)
- Austenitic Stainless Steel (1)
- Austenitic Steels (1)
- Austenitic stainless steel (1)
- Austenitic steel 316L (1)
- Auswirkung von Explosionen (1)
- Authorities approval process (1)
- Automated arc welding (1)
- Automated inspection system (1)
- Automated operational modal analysis (1)
- Automated synthesis (1)
- Automated welding (1)
- Automatisierung (1)
- Automotive gases (1)
- Autonomous underwater vehicles (1)
- Axial and lateral design (1)
- Axial load bearing (1)
- Axial pile capacity (1)
- BAM Windenergie Fügetechnik (1)
- BAM-GGR 016 (1)
- BAM-GGR 022 (1)
- BAM-GGR 023 (1)
- BAM-Gefahrgutregel (1)
- BDS broadband dielectric spectroscopy (1)
- BGE TECHNOLOGY (1)
- BOFDA (1)
- BOTDA (1)
- Backscattered electrons (1)
- Bacteria repellent surfaces (1)
- Bacterial adhesion (1)
- Bacterial adhesion tests (1)
- Barriere (1)
- Basic populaiton (1)
- Batch reactions (1)
- Batch test (1)
- Batch testing (1)
- Batterie-Lagerung (1)
- Batterie-Transport (1)
- Battery Classification (1)
- Battery Safety (1)
- Battery aging (1)
- Battery characterization (1)
- Battery failure mechanisms (1)
- Battery vehicle (1)
- Baustähle (1)
- Bauteilprüfung, -sicherheit und -zertifizierung (1)
- Bauzustandsanalyse (1)
- Bayesian analysis (1)
- Bayesian updating of stress ranges (1)
- Bead-based assays (1)
- Bedarf (1)
- Bedeutung (1)
- Beginning of life (1)
- Begleitstoffe (1)
- Behmite (1)
- Behälter für radioaktive Stoffe (1)
- Behälteranforderungen (1)
- Behälterkonzepte (1)
- Beleuchtung (1)
- Benchmark (1)
- Bergungsdruckgefäß (1)
- Berstversuch (1)
- Berufsgenossenschaft (1)
- Beschichtung (1)
- Bestrahlte Brennelemente (1)
- Beständigkeit (1)
- Betrieb (1)
- Betriebslebensdauer (1)
- Betz vortex relation (1)
- Beulen (1)
- Bifunctionality (1)
- Bimetallic noble metal nanoparticles (1)
- Binary gas mixture (1)
- Binary mixtures (1)
- Bio-electrochemical (1)
- Bio-weathering (1)
- Biobased polymers (1)
- Biodeterioration and biodegradation (1)
- Bioelectrochemical CO2 reduction (1)
- Biofilm growth (1)
- Biofilms (1)
- Biofuel (1)
- Biofuel cells (1)
- Biogas-Wasserstoff-Gemische (1)
- Bioinspiration (1)
- Biomass (1)
- Biomaterials (1)
- Biomimetic surfaces (1)
- Biomimetics (1)
- Bionic materials (1)
- Biorefinery (1)
- Biotische/abiotische Faktoren (1)
- Bodenvariabilität (1)
- Boracite (1)
- Borate glasses (1)
- Borderline population (1)
- Boron (1)
- Borosilicate glasses (1)
- Boundary layer receptivity, stability & separation (1)
- Boundary layers (1)
- Brandschutzkonzepte (1)
- Brennelemente (1)
- Brennstabhüllrohr (1)
- Brennstoff (1)
- Bridge (1)
- Brillouin distributed fiber sensor (1)
- Brillouin-Streuung (1)
- Brittle failure (1)
- Broadband Dielectric Spectroscopy (1)
- Brown Coal Fly Ash (1)
- Bruchmechanik (1)
- Bruchzähigkeit (1)
- Brückensicherheit (1)
- Buckling piles circular shells (1)
- Buckling soil-structure-interaction offshore piles track (1)
- Building information modelling (1)
- Bulk metallic glasses (1)
- Bulk temperature (1)
- Bunsen-Kirchhoff-Preis (1)
- Burn-up (1)
- Burst Test (1)
- Burst requirements (1)
- Burst strength (1)
- C(T)-Proben (1)
- CCMat (1)
- CCQM (1)
- CCQM-K (1)
- CCUS, supercritical/dense phase CO2, carbon steels, martensitic steel, superaustenite steel, droplet corrosion (1)
- CFD simulation (1)
- CFK (1)
- CIGSe micro solar cells (1)
- CLUSTER (1)
- CO2 Corrosion (1)
- CO2 pipeline transport (1)
- CO2-Corrosion (1)
- CO2-Korrosion (1)
- CO2-Speicherung (1)
- CO2-corrosion (1)
- CSR (1)
- CT (1)
- Calamistrum (1)
- Calcium Cobaltite (1)
- Calcium maganate (1)
- Calcium manganate (1)
- Calciummanganat (1)
- Calibration (1)
- Caloric effects (1)
- Calorific value (1)
- Capillary waves (1)
- Car crash (1)
- Carbide (1)
- Carbon steels (1)
- Carbon Capture (1)
- Carbon Capture, Utilization and Storage (CCUS) (1)
- Carbon Electrodes (1)
- Carbon Fibre (1)
- Carbon Fibre Pressure Vessels (1)
- Carbon capture, utilization and storage technology (1)
- Carbon fiber (1)
- Carbon fibre pressure vessels (1)
- Carbon materials (1)
- Carbon nano-onion (1)
- Carbon nanodots (1)
- Carbon nanotubes (1)
- Carbon nitride (1)
- Carbon-based nanomaterials (1)
- Carbonate matrix stimulation (1)
- Carbons (1)
- Casing (1)
- Catalyst Layer (1)
- Catastrophic consequence (1)
- Cathode (1)
- Cathode active material (1)
- Cathode deactivation (1)
- Cathode material (1)
- Cavitation (1)
- Cell Exchange (1)
- Cell-repellent surfaces (1)
- Cells (1)
- Ceramic (1)
- Ceramic matrix composites (1)
- Ceramic multilayer (1)
- Ceramic multilayers (1)
- Ceramics and Composites (1)
- Certification (1)
- Certified reference materials (1)
- Chance-risk analysis (1)
- Changes with time (1)
- Char conversion (1)
- Char reactivity (1)
- Characterization (1)
- Chemical plants (1)
- Chemical potential (1)
- Chemical processes (1)
- Chemical synthesis (1)
- Chemically Complex Materials (1)
- Chemische Zusammensetzung, (1)
- Chemometrics (1)
- Chromstahl (1)
- Chrush (1)
- Chunky graphite (1)
- Cladding alloy (1)
- Cladding failure (1)
- Classification (1)
- Clean energy technology (1)
- Cleavage Fracture (1)
- Cleavage fracture (1)
- Close range photogrammetry (1)
- Clostridium ragsdalei (1)
- Cloud storage (1)
- Co-Basis-Legierung (1)
- Co-firing (1)
- Co-firings (1)
- Cobald based alloy (1)
- Cobalt (1)
- Cobalt-chromium alloy (1)
- Codependent failure mechanism (1)
- Coefficient of Friction (1)
- Coefficient of thermal expansion (1)
- Coffee (1)
- Coherent optical time domain reflectometry (1)
- Coherent optical time-domain reflectometry (C-OTDR) (1)
- Cold (1)
- Cold Cracking (1)
- Cold cracking (1)
- Cold cracking and welding (1)
- Colour center (1)
- Columnar and equiaxed structures (1)
- Combined distribution (1)
- Combustion Chamber (1)
- Commercial metal-organic frameworks (1)
- Competence Center (1)
- Competence center (1)
- Competence centre H2Safety@BAM (1)
- Competence of BAM (1)
- Complementary methodology and metrology (1)
- Complexity (1)
- Complexity of PA (1)
- Compliance (1)
- Component (1)
- Component manufatcturing (1)
- Composite Cylinder (1)
- Composite Overwrapped Pressure Vessels (1)
- Composite Pressure (1)
- Composite Pressure Vessel (1)
- Composite materials (1)
- Composite overwrapped pressure vessels (1)
- Composite reinforced tanks (1)
- Composite-Druckbehälter (1)
- Composite-Druckbehältern (1)
- Composite-Druckspeicher (1)
- Composition profiles (1)
- Compositionally complex alloy (1)
- Comprehensive study (1)
- Compressed hydrogen storage (1)
- Compression effect (1)
- Computation time (1)
- Computational (1)
- Computational Fluid Dynamics (1)
- Computed Tomography (1)
- Concepts (1)
- Concrete pavement surface textures (1)
- Condensed Matter Physics (1)
- Condensed matter physics (1)
- Condition monitoring (1)
- Conductor (1)
- Conductors (1)
- Configurational entropy (1)
- Confined catalyst (1)
- Conformation (1)
- Conformity assessment (1)
- Consequence limit (1)
- Constitutive law (1)
- Contact problem (1)
- Container Safety (1)
- Container design testing procedure (1)
- Containment (1)
- Containment analysis (1)
- Content simulation (1)
- Continuous compression stress relaxation (1)
- Continuum source atomic absorption spectrometry (1)
- Control strategy (1)
- Convection (1)
- Conventional and Tubular Specimen (1)
- Cooling simulations (1)
- Copper Deposition (1)
- Copper hydroxide (1)
- Copper sulfide (1)
- Copper vacancies (1)
- Copper-indium-gallium-diselenide (CIGSe) (1)
- Core-shell particles (1)
- Correlation length (1)
- Correlation width (1)
- Corrosion and storage (CCUS) technology (1)
- Corrosion costs (1)
- Corrosion detection (1)
- Corrosion protecting system (1)
- Corrosion protection pigments (1)
- Coupled fluid-particle simulation (1)
- Coûts de la corrosion (1)
- Co–Cr-alloy (1)
- Co−N-Cs (1)
- Cr-Mo-V steel (1)
- Crack Detection (1)
- Crack evolution (1)
- Crack growth (1)
- Crack repair (1)
- Crash loads (1)
- Creep effects (1)
- Creep-resistant Steel (1)
- Creep-resisting materials (1)
- Creep-resisting steel (1)
- Cribellate spiders (1)
- Criticality (1)
- Criticality analysis (1)
- Criticality safety analysis (1)
- Cross linking (1)
- Cross-cutting activities (1)
- Cross-cutting issues (1)
- Cross-linking (1)
- Cross-weld tensile sample (1)
- Croyo-starage (1)
- Crude oil (1)
- Crush (1)
- Crygenic (1)
- Cryoadsorption (1)
- Cryoegenic storage vessel (1)
- Cryogenic (1)
- Cryogenic Tank (1)
- Cryogenic state (1)
- Crystal Texture (1)
- Crystallography (1)
- Cu catalysts (1)
- CuInSe2 (1)
- CuO nanoparticles (1)
- Cure process (1)
- Current density distribution (1)
- Current results of the DELFIN project (1)
- Cutting forces (1)
- Cutting tool (1)
- Cutting tools (1)
- Cyber security (1)
- Cycle-fatigue sensitivity (1)
- Cyclic axial shearing (1)
- Cyclic crack growth behaviour (1)
- Cyclic degradation (1)
- Cyclic loading (1)
- Cyclic loads (1)
- Cyclic oxidation (1)
- Cyclic stress-strain behaviour (1)
- Cyclic test (1)
- Cycloaddition (1)
- Cyro storage tanks (1)
- DED-Arc (1)
- DELFIN (1)
- DGUV (1)
- DICTRA modeling (1)
- DIN 18088-5 (1)
- DNA origami (1)
- DSS (1)
- DSSC (1)
- Damage Evolution (1)
- Damage accumulation (1)
- Damage detection (1)
- Damage mechanisms (1)
- Dampfkraftwerk (1)
- Dangerous goods container (1)
- Dark fermentation (1)
- Data Fusion (1)
- Data analysis (1)
- Data privacy (1)
- Data science (1)
- Database (1)
- Dauerfestigkeitsgrenze (1)
- Dauerüberwachung (1)
- Debond (1)
- Debye waller factor (1)
- Decision matrix analysis (1)
- Decision tree (1)
- Deep Discharge (1)
- Deep learning (1)
- Defect detection (1)
- Defective Lithium batteries (1)
- Defective lithium batteries (1)
- Degradation effects (1)
- Degradation of Mechanical Properties (1)
- Degradative processes (1)
- Dehnungsgeregelt (1)
- Delamination (1)
- Delayed optical feedback (1)
- Dendritic growth (1)
- Dense phase (1)
- Density functional theory (1)
- Density measurement (1)
- Depth profiles (1)
- Depth-profiling (1)
- Desiccation (1)
- Design Testing (1)
- Design and qualification standards (1)
- Design assessment of RAM packages (1)
- Design life (1)
- Design models (1)
- Design of the packaging attachment points (1)
- Design practice (1)
- Design type testing (1)
- Detektoren (1)
- Determination of periodic inspection (1)
- Deterministic (1)
- Detonation (1)
- Deuterium (1)
- Development (1)
- Di-tert-butyl peroxide (DTBP) (1)
- DiMoWind RDS-PP Maintenance Digital Twin Offshore Wind Energy (1)
- Diagnosis (1)
- Diamond Grinding (1)
- Dichtheit (1)
- Dichtungen (1)
- Dickblech (1)
- Diclofenac (1)
- Dicotic liquid crystals (1)
- Dielectric properties (1)
- Diesel (1)
- Diesel Fuel (1)
- Diffusible hydrogen (1)
- Diffusion barrier (1)
- Diffusionskoeffizient (1)
- Diffusivity (1)
- Digital Calibration Certificate (1)
- Digital Certificates (1)
- Digital Detector Arrays (1)
- Digital Image Correlation (DIC) (1)
- Digital Traceability (1)
- Digital quality infrastructure (1)
- Digital volume correlation (1)
- Digitale Bildverarbeitung (1)
- Digitale Transformation (1)
- Digitaler Produktpass DPP (1)
- Digitaler Zwilling (1)
- Diposal (1)
- Direct laser interference patterning (1)
- Discrimination of multiple gas sources (1)
- Dislocation (1)
- Dislocation cross slip (1)
- Dislocation structure (1)
- Disposal container (1)
- Dissolution behaviour (1)
- Distributed Sensing (1)
- Distributed acoustic sensing (DAS) (1)
- Distributed acoustic sensor (DAS) (1)
- Distributed acoustic sensors (1)
- Distributed fiber optic radiation sensing (1)
- Distributed fiber optic radiation sensors (1)
- Distributed fiber optic sensors (1)
- Distributed fiber sensing (1)
- Distributed fibre optic acoustic sensing (1)
- Distributed fibre optic sensing (1)
- Distributed fibre optic sensors (1)
- Distributed radiation detection (1)
- Distributed radiation monitoring (1)
- Distributed radiation sensing (1)
- Distributed temperature sensing (1)
- Distribution of relaxation times analysis (1)
- Ditigtal image correlation (1)
- Ditungsten carbide (1)
- Dokumentensammlung (1)
- Doped quantum dots (1)
- Droplet (1)
- Druckgasspeicher (1)
- Druckgefäß (1)
- Druckunterstützte Sinterung (1)
- Druckverformungsrest (1)
- Druckversuche (1)
- Druckwelle (1)
- Dry reforming of methane (1)
- Dual atmosphere (1)
- Dual energy (1)
- Dual-Energy (1)
- Dual-energy (1)
- Ductile Cast iron (1)
- Duplex Stainless Steels (1)
- Duplex stainless steels (1)
- Duplex-steel (1)
- Dynamic Bayesian Network (1)
- Dynamic fracture (1)
- Dynamic fracture toughness (1)
- Dynamic mechanical analysis (DMA) (1)
- Dynamic method (1)
- Dynamic stall (1)
- Dynamik (1)
- Dynamisch (1)
- Dynamische Beanspruchung (1)
- Dynamische Belastung (1)
- Dämpferbeton (1)
- E-bike Akkus (1)
- E. coli (1)
- ECE R110 (1)
- EERA Joint Program (1)
- EIS (1)
- ELISA (1)
- EN 10275 (1)
- ENSA (1)
- EPMA (1)
- EU regulations (1)
- EVA (1)
- Early hydration (1)
- Early oxidation (1)
- Early sulfidation (1)
- Early-life overstress (1)
- Earthen hydraulic infrastructures (1)
- Edelstahl (1)
- Edelstahl rostfrei (1)
- Education (1)
- Efficiency (1)
- Eignungsprüfung (1)
- Eindringversuche (1)
- Einfluss Mikrolegierungselmente Ti und Nb (1)
- Eingebettete Sensorik (1)
- Elastomer Dichtung (1)
- Elastomer Seals (1)
- Elastomer seals (1)
- Elastomerdichtung (1)
- Elastomeric optical waveguides (1)
- Elastomers (1)
- Electrical properties (1)
- Electro-Magneto-Mechanical (1)
- Electrocatalysts (1)
- Electrochemical CO2 conversion (1)
- Electrochemical Impedance Spectroscopy (1)
- Electrochemical catalysts (1)
- Electrochemical cells (1)
- Electrochemical characterisation (1)
- Electrochemical impedance spectra (1)
- Electrochemical noise (1)
- Electrochemical treatment (1)
- Electrodialysis (1)
- Electrohydraulic effect (1)
- Electrolyte membrane (1)
- Electrolytes (1)
- Electromagnetic radiation (1)
- Electromagnetic theories (1)
- Electron backscattered diffraction (EBSD) (1)
- Electron probe microanalysis (1)
- Electronic (1)
- Electroosmosis (1)
- Electrospinning (1)
- Elektrochemische Charakterisierung (1)
- Elektromagnetische Schmelzbadkontrolle (1)
- Elektromotoren (1)
- Ellipsometry (1)
- Embrittlement (1)
- Emission spectra (1)
- Encapsulation process (1)
- Encapsulations for damaged spent nuclear fuel (1)
- End of Life (1)
- End of safe service life (1)
- End-of-life decision making (1)
- Endlageranforderungen (1)
- Energetic materials (1)
- Energieerzeugung (1)
- Energiekabel (1)
- Energiekabelmonitoring (1)
- Energielabel (1)
- Energiepolitik (1)
- Energiequelle (1)
- Energy Efficiency (1)
- Energy Engineering and Power Technology (1)
- Energy Gases (1)
- Energy Labelling (1)
- Energy consumption (1)
- Energy conversion (1)
- Energy dispersive X-ray spectroscopy (1)
- Energy input (1)
- Energy policy (1)
- Energy production (1)
- Energy release (1)
- Energy transition (1)
- Energy-dispersive x-ray spectroscopy (1)
- Engineered barrier system (1)
- Engineering inspection (1)
- Entropy Noise (1)
- Entropy-Nozzle Interaction (1)
- Environmental impacts (1)
- Epimerization (1)
- Epoxidharz (1)
- Epoxy Resin (1)
- Epoxy resin (1)
- Equivalent Electrical Circuits (1)
- Equivalent circuit (1)
- Equivalent stress concentration factors (1)
- Erdgas-Wasserstoff-Gemische (1)
- Erdgasinfrastruktur (1)
- Ergopeptide (1)
- Erhitzungsprüfung (1)
- Ermüdungsprüfung (1)
- Erosion (1)
- Ersatzbaustoffe (1)
- Erstarrungsrisse (1)
- Etching (1)
- European Electromobility (1)
- European Guide (1)
- European funding strategies (1)
- Europäische Kommission (1)
- Eutectic (1)
- Evaluation (1)
- Event localization (1)
- Evolutionary computing (1)
- Exergy (1)
- Exfoliation (1)
- Experiment (1)
- Experimental (1)
- Experimental design (1)
- Explosion Limits (1)
- Explosion Protection (1)
- Explosion limit (1)
- Explosion pressure (1)
- Explosionsdiagramme (1)
- Explosionsdruck (1)
- Explosionsdrücke (1)
- Explosionsgruppen (1)
- Explosionszonen (1)
- Explosive Mixtures (1)
- Exposed aggregate concrete (1)
- Extended X-ray absorption fine structure (1)
- Extended storage (1)
- Extended storing (1)
- Extrapolation of degradation (1)
- FAST (1)
- FCH JU (1)
- FEA (1)
- FEM-Simulation (1)
- FRET (1)
- FVK (1)
- Fahrzeugbrand (1)
- Failure Mechanism (1)
- Failure mechanisms (1)
- Failure rate-pressureVolume-curve (1)
- Faser-Kunststoff-Verbund (1)
- Faserkunststoffverbunde (1)
- Faserverbundbehälter (1)
- Faserverstärkte Kunstoffe (1)
- Fassade (1)
- Fast scanning calorimetry (1)
- Fast scanning calormetry (1)
- Fatigue deterioration (1)
- Fatigue life assessment (1)
- Fatigue of sandwich structures (1)
- Fe-Cr alloys (1)
- Fe-N-C catalyst (1)
- Fe3Al (1)
- Federated learning (1)
- Federunterstützte Metalldichtungen (1)
- Fehlervermeidung (1)
- Feinkornbaustähle (1)
- Fem (1)
- Femtosecond (1)
- Femtosecond laser-processing (1)
- Femtosekunden-Laserablation (1)
- Ferndiagnose (1)
- Ferngasleitung (1)
- Ferritic spheroidal graphite cast iron (1)
- Ferritic steel (1)
- Ferritic steels (1)
- Ferritic–martensitic steel (1)
- Fertigung (1)
- Fertigungsfehler (1)
- Feuersicherheit (1)
- Feuerwehr (1)
- Fiber Bragg grating sensors (1)
- Fiber optic radiation sensor (1)
- Fiber optic radiation monitoring (1)
- Fiber optics (1)
- Fiber optics sensors (1)
- Fiber reinforced polymers (1)
- Fiber sensors (1)
- Fiber-optic speckle interferometry (1)
- Fibre optical sensing (1)
- Fibre Break (1)
- Fibre Break Accumulation (1)
- Fibre Optic Sensors (1)
- Fibre break model (1)
- Fibre breaks (1)
- Fibre misalignment (1)
- Fibre reinforced plastic (1)
- Fibre reinforced plastics (FRP) (1)
- Fibre waviness (1)
- Fibre-break model (1)
- Fibre-optic (1)
- Fibre-optic sensors (1)
- Fibremod (1)
- Field tests (1)
- Filament winding (1)
- Film depositition (1)
- Final Disposal (1)
- Final disposal (1)
- Final disposal cask (1)
- Final storage (1)
- Finite Element Mesh Transition (1)
- Finite Element Methode (1)
- Finite element anaylsis (1)
- Finite element model (1)
- Finite-difference time-domain calculations (FDTD) (1)
- Finite-element-analysis (1)
- Fire Reference (1)
- Fire Reference Test (1)
- Fire ball (1)
- Fire engulfment (1)
- Fire engulfment tests (1)
- Fire reference (1)
- Flammability classification (1)
- Floor heating (1)
- Flow cytometry (1)
- Fluid-rock interactions (1)
- Fluid-structure interaction (1)
- Fluorescence (1)
- Fluorescence spectroscopy (1)
- Fluorophore tracer (1)
- Foaming (1)
- Focus area energy gases (1)
- Focused ion beam (1)
- Force reconstruction (1)
- Foresight Prozess H2 (1)
- Formaldehyde (1)
- Formation (1)
- Formgedächtnispolymere (1)
- Forschungsbedarfe (1)
- Forschungslandschaft Wasserstoff (1)
- Forschungsnetzwerk Wasserstoff (1)
- Foundation Pile (1)
- Foundation reliability analysis (1)
- Foundation reuse (1)
- Four point bending test (1)
- Fragment (1)
- Fragments (1)
- Free electron laser (1)
- Free radicals (1)
- Free stream velocity osciallations (1)
- Freileitungen (1)
- Frequency (1)
- Frequency response (1)
- Frist (1)
- Fs-Laser (1)
- Fs-laser patterning (1)
- Fuel (1)
- Fuel Gases (1)
- Fuel Technology (1)
- Fuel assemblies (1)
- Fuel rod behavior (1)
- Fuel rods (1)
- Full scale bonfire test (1)
- Functional properties (1)
- Functional safety (1)
- Functionalization (1)
- Fungal biofilms (1)
- Funkgeräte (1)
- Funkgeräte Löscheinsatz (1)
- Fusion zone size (1)
- GAUSSian net (1)
- GAUSSsches Wahrscheinlichkeitsnetz (1)
- GMNIA (1)
- GMR (1)
- GPU parallel computation (1)
- GTAW (1)
- GTR (1)
- GTR No 13 (1)
- GUR (1)
- Gamma irradiation (1)
- Gamma-irradiation (1)
- Gammastrahlung (1)
- Gap analysis (1)
- Gas Reference Material (1)
- Gas Sorption (1)
- Gas behaviour (1)
- Gas calorimetry (1)
- Gas chromatography (1)
- Gas cloud explosion (1)
- Gas cylinders (1)
- Gas diffusion electrodes (1)
- Gas diffusion layer (1)
- Gas diffusion layers (1)
- Gas emission (1)
- Gas evolution (1)
- Gas grid (1)
- Gas metal arc welding (1)
- Gas mixtures (1)
- Gas pressure cable (1)
- Gas purity (1)
- Gas sensor (1)
- Gas separation membrane (1)
- Gas turbine (1)
- Gasdetektion (1)
- Gasdruckprüfung (1)
- Gaseous filling (1)
- Gases (1)
- Gasgualität (1)
- Gaspermeation (1)
- Gasreinheit (1)
- Gassensoren (1)
- Gasspeicherung (1)
- Gefahrgut Transport (1)
- Gefahrgutrecht (1)
- Gefahrgutregel Transport kritische Batterien (1)
- Gefahrgutregeln der BAM (1)
- Gefüge (1)
- Gekoppelte Fluid-Partikel Simulationen (1)
- General Chemistry (1)
- General Materials Science (1)
- General Provisions (1)
- Generalized Newmark-alpha (1)
- Geochemie (1)
- Geoenergie (1)
- Geological Storage (1)
- Geology (1)
- Geomechanics (1)
- Geomechanics of offshore foundations (1)
- Geometry influence (1)
- Geopolymers (1)
- Geothermal borehole (1)
- German National Alliance for Hydrogen Safety (1)
- Germanium sulfide (1)
- Gesetzesgrundlagen (1)
- Gesetzliche Aufgaben (1)
- Getting started (1)
- Gitterfehlpassung (1)
- Glas fibre reinforced polymer (1)
- Glasfaserverstärkter Kunststoff (1)
- Glaskapillaren (1)
- Glasmatrixkomposit (1)
- Glass capillaries (1)
- Glass fiber reinforced polymer (1)
- Glass fibre reinforced plastics (1)
- Glass forming melts (1)
- Glass liner (1)
- Glass manufacturing (1)
- Glass matrix composite (1)
- Glass melt (1)
- Glass powder (1)
- Glasspeicher (1)
- Glasübergang (1)
- Global Optimization (1)
- Global hydrogen market (1)
- Glow-discharge (1)
- Glow-discharge optical emission spectroscopy (1)
- Gouging (1)
- Graduiertenkolleg (1)
- Grain boundaries (1)
- Grain growth (1)
- Graphite furnace (1)
- Grating (1)
- Green Deal (1)
- Green Hydrogen (1)
- Green synthesis (1)
- Gremienarbeit (1)
- Ground (1)
- Ground movement (1)
- Grout Injection (1)
- Groutverbindung (1)
- Growth competition (1)
- Grundgesamtheit (1)
- Grundwasser (1)
- Guidance material (1)
- Gummi (1)
- Gusseisen (1)
- H2-Abbau (1)
- H2-Tankstelle (1)
- H2HohlZug (1)
- H2Hohlzug (1)
- H2Safety@BAM.de (1)
- H2safety (1)
- H3PO3 (1)
- H3PO4 life cycle (1)
- HAZID (1)
- HLW (1)
- HT-PEFC (1)
- Halogens (1)
- Halophile (1)
- Hardening (1)
- Harmonisation (1)
- Hasard assessment (1)
- Haydrogen Assisted Cracking (1)
- Hazard and risk assessment (1)
- Hazard monitoring (1)
- Heat Flux (1)
- Heat Pumps (1)
- Heat Release Rate (1)
- Heat capacity (1)
- Heat emission (1)
- Heat radiation (1)
- Heat release (1)
- Heating rate (1)
- Heavy crude oil (1)
- Heizgeräte (1)
- Helical spring (1)
- Helium (1)
- Helium implantation (1)
- Helium-Dichtheitsprüfung (1)
- Herausforderungen beim Schweißen hochfester FKB (1)
- Heterogeneous ageing (1)
- Hexagonally-arranged nano-protrusions (1)
- HfO2 (1)
- Hierarchical micro-nanostructures (1)
- Hierarchical structures (1)
- High Entropy Alloy (1)
- High Entropy Materials (1)
- High Molecular Polyethylene (1)
- High Pressure (1)
- High Pressure Gaseous Hydrogen (1)
- High impact testing (1)
- High interstitial austenitic steel (1)
- High power welding (1)
- High pressure gas storage (1)
- High strength fine grained structural steels (1)
- High strength steels (1)
- High temperature (1)
- High temperature low sag (1)
- High temperature low sag (HTLS) conductors (1)
- High voltage cable (1)
- High voltage cable accessories (1)
- High-Cycle (1)
- High-Order (1)
- High-Order Methods (1)
- High-Pressure Hydrogen (1)
- High-energy X-ray CT (1)
- High-performance computing (1)
- High-precision nail penetration (1)
- High-pressure (1)
- High-pressure Gaseous Hydrogen (1)
- High-pressure high-temperature (1)
- High-pressure volumetric analyzer (HPVA) (1)
- High-resolution (1)
- High-resolution absorption isotopic spectrometry (1)
- High-resolution continuum source atomic absorption spectrometer (1)
- High-strength steel filler metal (1)
- High-temperature fuel cells (1)
- High-temperature polymer electrolyte membrane fuel cell (1)
- Highly permeably polynorbornenes (1)
- History (1)
- Hochdruckspeicherung (1)
- Hochfester vergüteter Feinkornbaustahl (1)
- Hochspannungs-Freileitungen (1)
- Hochspannungsleiter (1)
- Hochtemperaturbrennstoffzelle (1)
- Hochtemperaturermüdung (1)
- Hohlprofilknoten (1)
- Hohlzugprobe (1)
- Hopkinson Bar (1)
- Horizon 2020 (1)
- Horizontal stress (1)
- Horizontal wind turbine (1)
- Hot Press (1)
- Hot cell (1)
- Hot stage microscopy (1)
- HyComp (1)
- Hybrid Laser arc Welding (1)
- Hybrid alkaline cement (1)
- Hybrid cement (1)
- Hybrid metrology measurement (1)
- Hybrid monte carlo (1)
- Hybridschweißen (1)
- Hydraulic proof testing (1)
- Hydraulischer Lastwechselversuch (1)
- Hydrazinchemie (1)
- Hydride formation (1)
- Hydrides (1)
- Hydrodynamics (1)
- Hydrogen Fuelling Stations (1)
- Hydrogen Infrastructure (1)
- Hydrogen Metrology (1)
- Hydrogen Purity (1)
- Hydrogen Safety (1)
- Hydrogen Standards (1)
- Hydrogen Storage Materials (1)
- Hydrogen Strategy (1)
- Hydrogen Supply (1)
- Hydrogen accidents (1)
- Hydrogen adsorption (1)
- Hydrogen adsorption storage (1)
- Hydrogen analysis (1)
- Hydrogen and fuel cell technology (1)
- Hydrogen composite cylinder risk consequence (1)
- Hydrogen cryostorage (1)
- Hydrogen energy (1)
- Hydrogen enhanced vacancy formation (1)
- Hydrogen enriched natural gas (1)
- Hydrogen evolution reaction (1)
- Hydrogen gas (1)
- Hydrogen gas sensor (1)
- Hydrogen generation (1)
- Hydrogen in metals (1)
- Hydrogen infrastructure (1)
- Hydrogen market (1)
- Hydrogen policies (1)
- Hydrogen quality (1)
- Hydrogen refueling station (1)
- Hydrogen release (1)
- Hydrogen solubility in steels (1)
- Hydrogen storage composite cylinder safety (1)
- Hydrogen storage tank (1)
- Hydrogen strategy (1)
- Hydrogen supply (1)
- Hydrogen technologies (1)
- Hydrogen technology (1)
- Hydrogen uptake reproducibility (1)
- Hydrogen-assisted cracking (1)
- Hydrogen-containing gas mixture (1)
- Hydrogen-containing mixture (1)
- Hydrogen-containing mixtures (1)
- Hydrogen-containing natural gas (1)
- Hydroliquefaction (1)
- Hydrophobic treatment (1)
- Höherfeste Feinkornbaustähle (1)
- Hüllrohr (1)
- IAEA fire testing (1)
- IAEA regulations (1)
- IAEA regulations (SSR-6, SSG-26) (1)
- ICP-MS (1)
- ICP-OES (1)
- ID-MS (1)
- IFGARD (1)
- IN725 (1)
- IP-2 (1)
- IP-3 (1)
- IR oxide (1)
- IRHD (1)
- IRHD micro hardness (1)
- IRHD microhardness (1)
- ISO 11119 (1)
- ISO 12111 (1)
- ISO 1496-1 (1)
- ISO 15363 (1)
- ISO 15686 (1)
- ISO 9223 (1)
- Ignition Source (1)
- Ignition energy (1)
- Ignition sources (1)
- Ignition temperature (1)
- Immunassay (1)
- Immunoassays (1)
- Immunosensor (1)
- Impact Absorbed Energy (1)
- Impact Limiters (1)
- Impact behavior (1)
- Impact factor (1)
- Impact wear (1)
- Impakt (1)
- Imperfectly mounted reinforcement cage (1)
- In situ Raman (1)
- In situ X-ray diffraction (1)
- In situ coupling (1)
- In situ spectroscopy (1)
- In-situ (1)
- In-situ ED-XRD (1)
- In-situ characterization of GDLs (1)
- In-situ effect (1)
- In-situ polymerization (1)
- In-situ synchrotron X-ray computed tomography (1)
- In-situ synchrotron X-ray radiography (1)
- In-situ tensile test (1)
- Incoherent optical frequency domain reflectometry (1)
- Incoming goods control (1)
- Incremental encoder speed estimation (1)
- Indenter modulus (1)
- Independent Surveillance (1)
- Independent test method (1)
- Indirect Combustion Noise (1)
- Indium islands (1)
- Indium preferential nucleation (1)
- Industrial application (1)
- Industrial applications (1)
- Industrial condition monitoring (1)
- Industrial explosions (1)
- Industrial needs (1)
- Industry 4.0 (1)
- Infrastruktur (1)
- Inhaltsstoffe (1)
- Initial testing (1)
- Injection locking (1)
- Innendruckprüfung (1)
- Innovation (1)
- Innovation system (1)
- Inorganic Reference Materials (1)
- Inorganic impurities (1)
- Inserts (1)
- Insoluble content (1)
- Instandhaltung (1)
- Instandsetzung (1)
- Insulation (1)
- Insulators (1)
- Integral Range (1)
- Integrated analysis (1)
- Integrating sphere spectroscopy (1)
- Integrity monitoring (1)
- Integrity testing (1)
- Integritätsprüfung (1)
- Intelligent control (1)
- Interface model (1)
- Interlaboratory comparison (1)
- Intermediate level waste (1)
- Intermediate scale (1)
- Intermetallic compound (1)
- Intermittent compression stress relaxation (1)
- Internal Surfaces (1)
- Internal collision (1)
- Internal combustion engines (1)
- Internal shock absorber (1)
- Internal stresses (1)
- Internal-Field-Guarded-Active-Region Design (IFGARD) (1)
- Internationale Endlagerkonzepte (1)
- Internationale Recherche (1)
- Internetplattform (1)
- Intrinsic OER activity (1)
- Introduction Department 3 (1)
- Intumescent material (1)
- Inventaraufprall (1)
- Inventarverhalten (1)
- Inverter-type air conditioner (1)
- Ion-exchange membranes (1)
- Ionic porosity (1)
- Ionizing radiation (1)
- Ionothermal Template Transformation (1)
- Iridium oxide (1)
- Isolation (1)
- Isomerisierung (1)
- Isotopenstandard (1)
- Jacket foundations (1)
- Jacket structures (1)
- Jacket-Gründungsstrukturen (1)
- Japanese-German energy partnership (1)
- Jet-fires (1)
- Joining process (1)
- KICstartH2 (1)
- KKS (1)
- KONRAD (1)
- KTE (1)
- Kabinenluftströmung (1)
- Kaltriss (1)
- Kaltriss und Schweißen (1)
- Kaltrissprüfung (1)
- Kalzinierung (1)
- Katalysator (1)
- Kathodischer Korrosionsschutz (1)
- Kerbspannungskonzept (1)
- Kernenergienutzung (1)
- Kerntechnik (1)
- Kerntechnische Entsorgung (1)
- Kineatic aspects (1)
- Kinematic (1)
- Kinetic study (1)
- Kirchhoff (1)
- Klebeverbindungen (1)
- Knowledge gaps (1)
- Kohäsivzonenmodell (1)
- Kompetenzzentrum H2Safety@BAM (1)
- Komponenten (1)
- Komponentenprüfung (1)
- Kondensation (1)
- Konformitätsprüfung Messunsicherheit (1)
- Konsequenz (1)
- Kontamination von H2 (1)
- Konzeptentwicklung (1)
- Korosi (1)
- Korrosionsmonitoring (1)
- Kosten- und Wirksamkeitsanalyse (1)
- Kostenoptimierung (1)
- Kriechen (1)
- Kriechermüdung (1)
- Kritikalität (1)
- Kryodruck (1)
- Kühlmöbel (1)
- Künstliche Neuronale Netze (1)
- LAUS (1)
- LBM-DEM (1)
- LCA (1)
- LDA (1)
- LDX (1)
- LIFT (1)
- LN2 cooling (1)
- LPG (1)
- LTT-Zusatzwerkstoff (1)
- LTT-Zusatzwerkstoffe (1)
- Ladungssicherung (1)
- Lagercontainer (1)
- Langzeitmessung (1)
- Langzeitversuche (1)
- Large Aperture Ultrasound System (LAUS) (1)
- Large area structuring (1)
- Large components (1)
- Large objects (1)
- Large scale fire testing (1)
- Large-scale processing (1)
- Large-scale tests (1)
- Laser (1)
- Laser Doppler vibrometry (1)
- Laser damage (1)
- Laser dynamics (1)
- Laser hybrid welding (1)
- Laser induced XUV spectroscopy (1)
- Laser nanostructuring (1)
- Laser patterning (1)
- Laser powder bed fusion (PBF-LB/M, L-PBF) (1)
- Laser-induced amorphization (1)
- Laser-induced micro- and nanostructures (1)
- Laser-induced periodic surface strctures (LIPSS) (1)
- Laser-induced periodic surface structures (1)
- Laser-induzierte periodische Oberflächenstrukturen (1)
- Laserhybridschweißen (1)
- Laserstrahlschweißen (1)
- Lastanschlag (1)
- Lastflexibilität (1)
- Lastwechsel (1)
- Lastwechselfestigkeit (1)
- Lateral dimensions (1)
- Lateral load bearing (1)
- Lattice Boltzmann simulation (1)
- Layer depostion (1)
- Layered manganese oxide (1)
- Leak-tightness (1)
- Leakage Rate (1)
- Leaktightnes (1)
- Leaktightness (1)
- Lean duplex stainless steel (1)
- Lebensdauerabschätzung (1)
- Lebenslaufakte (1)
- Lebewind (1)
- Leckage (1)
- Legacy waste container (1)
- Legierungen (1)
- Leitlinien (1)
- Levitation (1)
- Levitation Device (1)
- Li dendrites (1)
- Li dendrites penetration mechanisms (1)
- Li ion Battery (1)
- Li-ion batteries (1)
- LiFePO4 (1)
- LiS battery (1)
- Lid behavior (1)
- Lid temperature (1)
- Lid-system (1)
- Life cycle (1)
- Life cycle assessment (1)
- Life cycle assessment (LCA) (1)
- Life span (1)
- Life time prediction (1)
- Lifetime Extension (1)
- Lifetime criterion (1)
- Lifetime evaluation (1)
- Light-harvesting (1)
- Lignin (1)
- Lignite Coal (1)
- Limit of acceptable consequence (1)
- Liquefied natural gas (1)
- Liquefied natural gas-like mixtures (1)
- Liquid phase sintering (1)
- Liquified hydrogen (1)
- Literature survey (1)
- Literaturrecherche (1)
- Lithium Ion Cells (1)
- Lithium ion battery (1)
- Lithium ion flux (1)
- Lithium metal batteries (1)
- Lithium-Batteries (1)
- Lithium-Ion Battery Safety and Testing (1)
- Lithium-Ionen-Batterien (1)
- Lithium/sodium−carbon dioxide batteries (1)
- Litium Ion Cells (1)
- Litiumbatterien (1)
- LoRaWAN (1)
- Load cases for transport (1)
- Load cycle Test (1)
- Load cycle test (1)
- Load cycle tests (1)
- Load profile (1)
- Load-Based Test Method (1)
- Local approaches (1)
- Lockin Thermografie (1)
- Long term investigation (1)
- Long term storage (1)
- Long time storage (1)
- Long-term calculation (1)
- Long-term experiment (1)
- Long-term interim storage (1)
- Long-term investigation (1)
- Long-term safety (1)
- Long-term storage (1)
- Loss of safety (1)
- Low temperature behaviour (1)
- Low temperature investigation (1)
- Low-carbon (1)
- Low-loading (1)
- Lowlevel and midlevel radioactive waste (1)
- Lowlevel midlevel radioactive waste (1)
- Lubricants (1)
- Lucky punch arey (1)
- Luftultraschall (1)
- Luminescence (1)
- Lupolen (1)
- Länderübersicht (1)
- Löschwasser (1)
- M-N-C catalysts (1)
- MIC (1)
- MID IR Spectroscopy (1)
- MNC catalyst (1)
- MOF (1)
- MOF databases (1)
- MOFs (1)
- MOSES (1)
- MOSYTRAF (1)
- MRI (1)
- MSG-Schweißen (1)
- MW-AES (1)
- Machine Learning (1)
- Machine element (1)
- Macroalgae (1)
- Magnesium (1)
- Magnesium chloride brine (1)
- Magnetic beads (1)
- Magnetocaloric effect (1)
- Magnetoeleastic couplin (1)
- Magnetpartikel (1)
- Maintenance Digital Twin Offshore Wind Energy (1)
- Management system (1)
- Manufacturing tolerances (1)
- Marine geomechanics (1)
- Marine geotechnics (1)
- Mariner Bewuchs (1)
- Market Rump Up (1)
- Martensit (1)
- Martensitic steel (1)
- Martensitic steels (1)
- Martensitstarttemperatur (1)
- Maschinelles Lernen (1)
- Mass transport (1)
- Master Curve-Konzept (1)
- Masterschädigungslinie (1)
- Material (1)
- Material Point Method (1)
- Material Point Method (MPM) (1)
- Material point method (1)
- Material point method (MPM) (1)
- Material properties (1)
- Material properties and compatibility (1)
- Material science (1)
- Materialeignung und -kompatibilität (1)
- Materialmodell (1)
- Materialprüfung (1)
- Materials compatibility (1)
- Materials in space (1)
- Matrimid (1)
- Matter reorganization (1)
- Matter reorganization theories (1)
- Mauerwerkbruch (1)
- Maximum acceptable consequence (1)
- Maximum service pressure (1)
- Maxwell equations (1)
- Mean burst pressure (1)
- Mean strength (1)
- Measurement uncertainty (1)
- Mechanical and thermal behaviour (1)
- Mechanical challenges (1)
- Mechanical impacts (1)
- Mechanical loss spectroscopy (1)
- Mechanical testing (1)
- Mechanical tests (1)
- Mechanics of Materials (1)
- Mechanischer Schlag (1)
- Mechanisches Verhalten (1)
- Mechanistic Modelling (1)
- Medical implants (1)
- Meerwasser (1)
- Membrane (1)
- Membrane polymers (1)
- Mesoporous (1)
- Metal (1)
- Metal Seal (1)
- Metal Seals (1)
- Metal foam microstructure (1)
- Metal organic frameworks (1)
- Metal-organic Framework (1)
- Metal-organic frameworks (1)
- Metal-organic frameworks (MOFs) (1)
- Metalldichtung (1)
- Metallic silver precipitates (1)
- Metallschutzgasschweißen (1)
- Metals (1)
- Metals and alloys (1)
- Metal−organic frameworks (1)
- Meteorological influence (1)
- Methan (1)
- Methanogen (1)
- Methodenentwicklung (1)
- Methyl group rotation (1)
- Micro-CT (1)
- Micro-computed tomography (1)
- Micro-concentrator (1)
- Micro-mechanics (1)
- Microalgae culture (1)
- Microalloying elements Ti and Nb (1)
- Microbial simulation, (1)
- Microconcentrator solar cell (1)
- Microcracks (1)
- Microemulsion (1)
- Microfine Cement (1)
- Microfine cement (1)
- Microfluidics (1)
- Micromechanical analysis (1)
- Micromechanical modelling (1)
- Micromechanical simulation (1)
- Microporous Layer (1)
- Microporous carbon (1)
- Microporous layer (1)
- Microporous polymers (1)
- Microseismicity (1)
- Microsilica (1)
- Microstructur (1)
- Microstructural evolution (1)
- Microstructure evolution (1)
- Microstructure modification (1)
- Mikrolegierungselemente (1)
- Mikroorganismen (1)
- Mindedestberstdruck (1)
- Mindestfestigkeiten (1)
- Mini-UAV (1)
- Minimum Ignition Energy (1)
- Minimum burst pressure (1)
- Minimum energy performance standards (1)
- Minor alloying elements (1)
- Mixed conductors (1)
- Mixed metal oxide (1)
- Mixed-ligand MOFs (1)
- Mobilität (1)
- Mock-up (1)
- Modell (1)
- Modulare Pipelineanlage (1)
- Molecular dynamics (1)
- Molecular sieves (1)
- Molecular-dynamics (1)
- Molybdenum substrate (1)
- Monitoring Endlager (1)
- Monitoring of CO 2 (1)
- Monitoring-informed inspection and maintenance planning (1)
- Monopile (1)
- Monopile Buckling (1)
- Monopile installation risks (1)
- Monopile support structure (1)
- Monte-Carlo experiment (1)
- Monte-Carlo simulation (1)
- Monte-Carlo-Analysis (1)
- Monte-Carlo-Simulation (1)
- Monte-Carlo-experiment (1)
- Monte-Carlo-simulation (1)
- Monte-carlo simulation (1)
- Morsleben Repository (ERAM) (1)
- Mortar (1)
- Mortel (1)
- Motif (1)
- Multi-Modal Transportation Test (1)
- Multi-method Metrology (1)
- Multi-sample analysis (1)
- Multichannel measuring (1)
- Multicomponent (1)
- Multidimensional hydrogen technology adoption (1)
- Multidimensional technology adoption (1)
- Multielemental analysis (1)
- Multimodal solution (1)
- Multiparameter sensing (1)
- Multiple principal element alloy (1)
- Multiple-principal element alloy (1)
- Multiscale modelling (1)
- Muon tomography (1)
- Mössbauer study (1)
- M−N/Cs (1)
- NAMUR Open Architecture (1)
- NAPE (1)
- NAPE Project (1)
- NAPE-Project (1)
- NCT (1)
- NDE (1)
- NMC Cathode (1)
- NMR (1)
- NMR-Relaxometrie (1)
- NOL Ring test (1)
- NOL ring test (1)
- NaO-battery (1)
- Nachforderung (1)
- Nafion 117 (1)
- Nahtgeometrie (1)
- Nano (1)
- Nano-scratch test (1)
- Nanochemistriy (1)
- Nanocomposite (1)
- Nanocomposites (1)
- Nanofibers (1)
- Nanoheterostructures (1)
- Nanomaterials (1)
- Nanoparticle concentration (1)
- Nanopipettes (1)
- Nanosecond laser irradiation (1)
- Nanospheres (1)
- Nanostrcutures (1)
- Nanostructured materials (1)
- Nanostructuring (1)
- Native oxide layer (1)
- Natrium-Batterien (1)
- Natural fracture geometry (1)
- Natural gas-type mixtures (1)
- Naturmessungen (1)
- Near edge X-ray absorption fine structure spectroscopy (1)
- Net zero (1)
- Neural Networks (1)
- Neutron (1)
- Neutron imaging techniques (1)
- Neutron radiography (1)
- Neutron shielding material (1)
- Neutronen Abschirmmaterial (1)
- Neutronenbeugung (1)
- New energy carriers (1)
- Ni (1)
- Ni alloy (1)
- Ni-Legierung (1)
- Nicht zulassungspflichtig (1)
- Nicht-lineare Regression (1)
- Nicht-zulassungspflichtig (1)
- Nichtlinearitäten (1)
- Nichtrostender Stahl (1)
- Nickel alloy (1)
- Nickel alloys (1)
- Nickel base superalloy (1)
- Nickel foam (1)
- Nickel-base superalloys (1)
- Nickelbasislegierungen (1)
- Nnetwork (1)
- Nneutron imaging (1)
- Nobel-metal free electrocatalysis (1)
- Non-Destructive Testing (1)
- Non-conventional fuel gases (1)
- Non-destructive ambient analysis (1)
- Non-destructive testing civil engineering (1)
- Non-destructive testing in civil engineering (1)
- Non-linear Arrhenius behavior (1)
- Non-metals (1)
- Nondestructive testing techniques (1)
- Nonlinear Equation of Motion (1)
- Nonlinear Finite Element Formulations (1)
- Nonlinear dynamics (1)
- Nonlinear lithography (1)
- Nonlinear optics (1)
- Nonlinearities (1)
- Nonpolar (1)
- Normalverteilung (1)
- Normen (1)
- Normierungsvorschlag (1)
- Not requiring competent authority approval (1)
- Notched impact strength (1)
- Nuclear Fuel (1)
- Nuclear Structures (1)
- Nuclear Technology (1)
- Nuclear structures (1)
- Nuclear waste repository (1)
- Nuclear waste storage (1)
- Numerical Simulation (1)
- Numerical model (1)
- Numerical problem (1)
- Numerische Analyse (1)
- Numerische Berechnungsverfahren (1)
- Numerische Nachweismethoden (1)
- O Ring (1)
- O ring (1)
- O-ring metal seal (1)
- OWEA (1)
- Oberflächenkontaminiert (1)
- Oberflächenmodifikation (1)
- Offhore (1)
- Offhsore-Windenergieanlagen (1)
- Offshore Structures (1)
- Offshore Wind Energy Converter (1)
- Offshore Wind energy (1)
- Offshore Windenergieanlagen (1)
- Offshore Windkraftanlagen (1)
- Offshore pile foundation (1)
- Offshore steel (1)
- Offshore steel structures (1)
- Offshore wind (1)
- Offshore wind energy foundations (1)
- Offshore wind farm (1)
- Offshore wind farms (1)
- Offshore wind-turbine foundations (1)
- Offshore-Gründungen (1)
- Offshore-Strukturen (1)
- Offshore-Wind (1)
- Offshore-Windkraftanlagen (1)
- Offshorewindenergieanlagen (1)
- Oil and gas industry (1)
- Oil mist (1)
- Olfaction (1)
- Online-Monitoring (1)
- Open Circuit Voltage (1)
- Operando cell (1)
- Operational Technology (1)
- Operational loads (1)
- Optical Spectroscopy (1)
- Optical and Magnetic Materials (1)
- Optical fiber dosimetry (1)
- Optical fibre dosimetry (1)
- Optical incremental encoder (1)
- Optical isotopic spectrometry (1)
- Optical scattering (1)
- Optical spectroscopy (1)
- Optical time domain reflectometry (1)
- Optimal sensor placement (1)
- Ordered mesoporous carbon (1)
- Organic Solar Cell (1)
- Organic peroxide (1)
- Organic products (1)
- Orientation (1)
- Osmium (1)
- Overhead transmission lines (1)
- Overview (1)
- Oxide coatings (1)
- Oxide layer (1)
- Oxide-films (1)
- Oxygen permability (1)
- Oxygen-containing functionalities (1)
- P15y (1)
- P92 steels (1)
- PANi/SiO2 (1)
- PBF-LB/M (1)
- PDMS (1)
- PE-HD Sorption (1)
- PEM-Wasserelektrolyse (1)
- PN020 (1)
- PSA (1)
- PU-Foam (1)
- PV modules (1)
- PV-product (1)
- PVDF-Based membrane (1)
- PWM (1)
- Package safety (1)
- Package types (1)
- Packages (1)
- Packages for radioactive material (1)
- Packing density (1)
- Parallel seismic (1)
- Partial crystalline (1)
- Partial discharge sensors (1)
- Particle (1)
- Particle image velocimetry (1)
- Particle image velocimetry (PIV) (1)
- Particle size distribution (1)
- Passive IRT (1)
- Passve IR (1)
- Pattern matching (1)
- Pattern simulation (1)
- Pentafluoropyridine (1)
- Periodic insepction (1)
- Periodic inspection (1)
- Periodical review (1)
- Periodoc inspection (1)
- Perovskite solar cell (1)
- Perovskites (1)
- Perspektiven (1)
- Pfahlfußbeulen (1)
- Phase change material (1)
- Phase diagrams (1)
- Phase field modeling (1)
- Phase identification (1)
- Phase mask (1)
- Phase separation (1)
- Phase transitions (1)
- Phased array (1)
- Phasenumwandlung (1)
- Phenolic compounds (1)
- Phosphoric acid (1)
- Photodynamic therapy (1)
- Photon counting detectors (1)
- Photonenzählende Detektoren (1)
- Phototransistor (1)
- Photovoltaic cell encapsulation (1)
- Photovoltaic modules (1)
- Physical ageing (1)
- Physical relaxation (1)
- Physical vapor deposition (1)
- Physically based material model (1)
- Physics and Astronomy (miscellaneous) (1)
- Picture frame test (1)
- Piezopolarization (1)
- Pile Buckling (1)
- Pile Capacity (1)
- Pile Foundation (1)
- Pile ageing (1)
- Pile integrity testing (1)
- Pile monitoring (1)
- Pile retrofit system (1)
- Pile-Tip-Buckling (1)
- Pipeline design (1)
- Pipeline-Transport (1)
- Pitting (1)
- Plasma Polymers (1)
- Platinum (1)
- Platinum-free catalyst (1)
- Platinum-ruthenium colloid (1)
- Polar method (1)
- Polarmethode (1)
- Pole figures (1)
- Policies (1)
- Polyaniniline (1)
- Polyclonal PETN-antibodies (1)
- Polyclonal TNT-antibodies (1)
- Polyester-Urethan (1)
- Polyklonale PETN-Antikörper (1)
- Polyklonale TNT-Antikörper (1)
- Polymer (1)
- Polymer Electrolyte Membrane Fuel Cell (1)
- Polymer encapsulant (1)
- Polymer foils (1)
- Polymer in fuels (1)
- Polymer intrinsischer Mikroporosität (1)
- Polymer matrix (1)
- Polymer membranen (1)
- Polymer membranes (1)
- Polymer of intrisic microporosity (1)
- Polymers of Intrinsic Microporosity (1)
- Polymers of intrinsic Microporosity (1)
- Polymers with intrinsic microporosity (1)
- Polyurethane Foam (1)
- Polyurethane Foam, Impact Limiters, PU-Foam (1)
- Polyurethane foam (1)
- Population (1)
- Population density (1)
- Porosity prediction (1)
- Porous Materials (1)
- Porous film (1)
- Post-weld heat treatment (1)
- Posterior fatigue reliability (1)
- Postsynthetic modification (1)
- Pouch (1)
- Powder diffraction (1)
- Powder method (1)
- Power factor (1)
- Power plants (1)
- Power to Gas (1)
- Power-to-gas (1)
- Practical application (1)
- Pre-charging (1)
- Precious-group metal-free catalyst (1)
- Precipitation (1)
- Precipitation influence (1)
- Preciptiates (1)
- Pressure Equipment (1)
- Pressure Vessel (1)
- Pressure cycle life tests (1)
- Pressure increase rate (1)
- Pressure recepacles (1)
- Pressure-dependent solubility (1)
- Pressure-volume-product (1)
- Preventive strategies (1)
- Primary Battery (1)
- Principal Component Analysis (1)
- Probabilistic approval approach (1)
- Probabilistic modelling (1)
- Probabilistik (1)
- Probabilistische Bewertung (1)
- Probabilitic approach (1)
- Probabilitische Ingenieurmodelle (1)
- Probability of detection (1)
- Probability of failure (1)
- Probenfertigung (1)
- Probengeometrie (1)
- Process and plant safety (1)
- Process industries (1)
- ProcessNet (1)
- Processes (1)
- Product policy (1)
- Product test (1)
- Programmierung (1)
- Project QI Digital: Quo vadis Use Case H2 Refuelling Station? (1)
- Projektvorhaben (1)
- Proof test (1)
- Propagation testing (1)
- Propagation; Gas release (1)
- Propane gas (1)
- Protection (1)
- Proton conducting materials (1)
- Proton conductivity (1)
- Proton exchange membrane fuel cells (1)
- Prototyp (1)
- Prozess- und Anlagensicherheit (1)
- Prozesse (1)
- Präzisierungsbedarf (1)
- Prüfpflichtig (1)
- Prüfraster (1)
- Pseudosymmetry (1)
- Pull-out (1)
- Pulvermethode (1)
- Pump-probe experiments (1)
- Puncture test (1)
- Purification (1)
- Purity analysis (1)
- Push and pull effects (1)
- Pyrolysis volatiles (1)
- QCSE (1)
- Qualitative results (1)
- Quality (1)
- Quality Assurance Measures (1)
- Quality management system (1)
- Quality management tool (1)
- Qualitätsinfrastruktur (1)
- Qualitätsmanagement (1)
- Quantiative results (1)
- Quantification (1)
- Quantitative Risikoanalyse (1)
- Quantum Confined Stark Effect (QCSE) (1)
- Quantum Yield (1)
- Quantum confined stark effect (1)
- Quantum dot (1)
- Quantum dots (1)
- Quartz Crystal Microbalance QCM (1)
- Quasi-distributed vibration sensing (1)
- Quasielastic neutron scattering (1)
- RAM Transport Package (1)
- RAM transport package (1)
- RED (1)
- REverse Time Migration (RTM) (1)
- RF (1)
- RME (1)
- RTM (1)
- Racetrack specimens (1)
- Radar (1)
- Radial Hydrides (1)
- Radiation (1)
- Radiation dosimetry (1)
- Radiation induced attenuation (1)
- Radiation sensors (1)
- Radiaton-induced attenuation (1)
- Radioactiv material (1)
- Radioactive Waste Disposal (1)
- Radioactive materials (1)
- Radioactive materials transport (1)
- Radioactive waste management (1)
- Radioactve (1)
- Radioaktive Materialien (1)
- Radioaktives Material (1)
- Radiocactive material (1)
- Radiografie (1)
- Rammpfähle (1)
- Randomness (1)
- Rapid gas decompression (1)
- Rapid partial release (1)
- Rate (1)
- Rate-dependent Materials (1)
- Rauchgasanalytik (1)
- Rayleigh-Streuung (1)
- Re-assessment of exiting bridges (1)
- Reactions (1)
- Real time measurement (1)
- Real transport (1)
- Real use behavior (1)
- Rechtssetzung (1)
- Recommendations (1)
- Recycability (1)
- Recyclability (1)
- Recyclingfähigkeit (1)
- Reduced Volume Method (1)
- Reference (1)
- Reference material (1)
- Reference materials (1)
- Reference measurement (1)
- Refraction (1)
- Regel- und Messtechnik (1)
- Regeln (1)
- Regelwerk (1)
- Regelwerke (1)
- Regelwerksentwicklung (1)
- Regenerative Energieformen (1)
- Regenerator (1)
- Regular inspection (1)
- Regularien (1)
- Regulations codes and standards (RCS) (1)
- Reibung (1)
- Reibungsreduktion (1)
- Reinforced composites (1)
- Reinforced concrete (1)
- Reinforced concrete containers (1)
- Relaxation analysis (1)
- Relaxation fatigue (1)
- Reliabillity (1)
- Remote acoustic emission sensing (1)
- Removal efficiency (1)
- Renewable Energy (1)
- Renewable Energy, Sustainability and the Environment (1)
- Renewable ernergy (1)
- Repair cycles (1)
- Repair of sandwich shell structures (1)
- Repair patch (1)
- Reparierbarkeit (1)
- Replacement (1)
- Repository (1)
- Reprecipitation (1)
- Requirements (1)
- Research and Development (1)
- Research needs (1)
- Residual Stress (1)
- Residual strength (1)
- Residual stress reduction (1)
- Resonance (1)
- Resource efficiency (1)
- Resources (1)
- Ressortforschung (1)
- Ressortforschungseinrichtung (1)
- Ressourcen (1)
- Restberstfestigkeit (1)
- Restlebensdauer (1)
- Rettungskräfte (1)
- Reverse Time Migration (RTM) (1)
- Reversible Hydrogen Storage (1)
- Rheometer (1)
- Ringversuche (1)
- Risikobasierte Inspektionsplanung (1)
- Risikobasierte Maßnahmenplanung (1)
- Risk Assessment (1)
- Risk assessment (1)
- Risk communication (1)
- Risk control (1)
- Risk-based design (1)
- Risk-based maintenance planning (1)
- Riss (1)
- Risse (1)
- Rissheilung (1)
- Risslumineszenz (1)
- Rissprozes (1)
- Rissprozess (1)
- Room-temperature (1)
- Rostasche (1)
- Rotorblattinspektion (1)
- Roughness (1)
- Round Robin Trial (1)
- Routine conditions of transport (1)
- Rubber sealing (1)
- Rubber seals (1)
- Röntgenrefraktion (1)
- Rückbau (1)
- Rückverstromung (1)
- S690QL (1)
- SAXS (1)
- SCF (1)
- SEM with EDX (1)
- SHM (1)
- SLM (1)
- SNL (1)
- SOFC (1)
- SPE-HPLC Automatisierung (1)
- Safe Transport (1)
- Safe handling (1)
- Safe transport (1)
- Safety Related Properties (1)
- Safety challenges (1)
- Safety factors (1)
- Safety goal (1)
- Safety measures (1)
- Safety report (1)
- Saline brine (1)
- Salt attack (1)
- Salt eutectics (1)
- Salt rock (1)
- Salt solution (1)
- Salzschmelzen (1)
- Sample preparation (1)
- Sample testing (1)
- Sand blasting (1)
- Sandwich Schalenstrukturen (1)
- Sandwich structures (1)
- Sandwichstruktur (1)
- Sauerstoff (1)
- Sauerstoffgrenzkonzentration (1)
- Saving effort (1)
- Scale adherence (1)
- Scale/shift factor and form/stretchFactor of time-temperature relation (1)
- Scanning electron microscopy (1)
- Scanning kelvin probe force microscopy (1)
- Scarf joint (1)
- Scarf joint repair (1)
- Scarf joint repairs (1)
- Scatter value (1)
- Schadenverhütung (1)
- Schalenbildung (1)
- Schalenprüfstand (1)
- Scherwellengeschwindigkeit (1)
- Schmiedeteile (1)
- Schnellladung (1)
- Schrauben (1)
- Schubmodul (1)
- Schutzziele (1)
- Schweißnahtgeometrie (1)
- Schweißverfahren (1)
- Schwer spanbar (1)
- Schwer zerspanbare Werkstoffe (1)
- Schwergas (1)
- Schwingversuch (1)
- Schädigung (1)
- Schädigungsmechanismen (1)
- Schädigungsprozesse (1)
- Scission (1)
- Screen printing (1)
- Screening Methoden (1)
- Screening method (1)
- Sea water (1)
- Seal Behavior (1)
- Seal Waste Safe (1)
- Seal behavior (1)
- Seal behaviour (1)
- Seal failure (1)
- Seal force (1)
- Seal properties (1)
- Sealed sources (1)
- Sealing (1)
- Sealing material (1)
- Seasonal energy efficiency ratio (1)
- Seasonal performance factor (1)
- Seaweeds (1)
- Second Life (1)
- Second-generation high temperature superconductor technology (1)
- Segregation (1)
- Seismic (1)
- Seismic measurement (1)
- Seismic migration (1)
- Selbstheilung (1)
- Selective laser melting (1)
- Selective oxidation (1)
- Self-damping (1)
- Semantic Segmentation (1)
- Semiconductors (1)
- Sensible Enthalpy Rise Approach (1)
- Sensitivity (1)
- Sensor Placement (1)
- Sensor aiming (1)
- Sensor alignment (1)
- Sensor deployment (1)
- Sensor orientation (1)
- Sensor response (1)
- Sensorarrays (1)
- Sensoren (1)
- Sensorik, Analytik und Referenzmaterialien (1)
- Sensors Placement (1)
- Sensors and analytics (1)
- Service life (1)
- Service life model (1)
- Service life tests (1)
- Shale (1)
- Shear exfoliation (1)
- Shear strength (1)
- Shear strength and stiffness (1)
- Shearing (1)
- Shell buckling (1)
- Ship building (1)
- Shrinkage (1)
- Shrinkage Reducing Admixture (1)
- SiO 2 (1)
- Sicherheit von Wasserstofftechnologien (1)
- Sicherheitsbewertung (1)
- Sicherheitsmanagement (1)
- Sicherheitstechnische Auslegung (1)
- Sicherheitstechnische Eigenschaften (1)
- Sieverts’ law (1)
- Silber (1)
- Silicate (1)
- Silicone elastomer (1)
- Silver cluster (1)
- Silver glass paste (1)
- Silver precipitates (1)
- Silver seal (1)
- Silver-glass metallization paste (1)
- Similarity (1)
- Simulation and experiment (1)
- Single atom catalysts (1)
- Single cable serial connection (1)
- Single crystal (1)
- Single-crystals (1)
- Single-site catalyst (1)
- Single-source precursors (1)
- Sintering additive (1)
- Sintering atmosphere (1)
- Sintern (1)
- Site-characterization (1)
- Skilled workers (1)
- Slap-down (1)
- Slow burst testing (1)
- Slow strain tensile tests (1)
- Slug (1)
- Social acceptance (1)
- Sodium ion battery (1)
- Sodium zinc borate glass (1)
- Sodium-ion-batteries (1)
- Soft-templated mesoporous films (1)
- Soil Struture Interaction (1)
- Soil-grout interface (1)
- Soil-pile interaction (1)
- Soil-water-structure interaction (1)
- Solar Cell (1)
- Solar concentrator (1)
- Solar excitation (1)
- Solarenergie (1)
- Solarthermie (1)
- Solid microanalysis (1)
- Solid state cooling (1)
- Solid-State Complexes (1)
- Solid-State-Reaction (1)
- Solid-State-Synthesis (1)
- Solid-state lithium metal batteries (1)
- Solid-state-synthesis (1)
- Solute transport experiments (1)
- Solution plasma (1)
- Sondervorschrift 674 (1)
- Sorption (1)
- Spalte (1)
- Spannungsgeregelt (1)
- Spatial light modulators (1)
- Spatially varying ground conditions (1)
- Spectral intensity (1)
- Spectrometry (1)
- Spectroscopic Ellipsometry (1)
- Speed-of-sound measurements (1)
- Spent Fuel Cladding (1)
- Spent fuel behavior (1)
- Spent fuel behaviour (1)
- Spent nuclear fuel management (1)
- Sphalerite (1)
- Spherical parallel manipulator (1)
- Spinel (1)
- Spontaneous Polarization (1)
- Spritzbeton (1)
- Spruce wood (1)
- Sprühlichtbogen (1)
- Sspeed of sound (1)
- Stability Buckling soil-structure-interaction piles offshore (1)
- Stabilität (1)
- Stacking test (1)
- Standardisation (1)
- Standardization (1)
- Standortvorteil (1)
- State of Safety (1)
- State of the art (1)
- Statisitcal evaluation (1)
- Statistic (1)
- Statistik (1)
- Steam oxidation (1)
- Steel P92 (1)
- Steel liner (1)
- Steel protection (1)
- Stichprobenumfang (1)
- Stimulated Brillouin Scattering (1)
- Stimulated Brillouin scattering (1)
- Stochastic variation of material properties (1)
- Stofftransport von Gasen (1)
- StorHy (1)
- Storage Technologies (1)
- Storage and transport (1)
- Storage and transportation casks (1)
- Storage system components (1)
- Storing spent fuel (1)
- Strain (1)
- Strain and temperature measurements (1)
- Strain measurements of wind turbine support structures (1)
- Strain rate (1)
- Stratification (1)
- Stratégies deprévention (1)
- Strength (1)
- Strength degradation (1)
- Stress Wave Propagation (1)
- Stress cone (1)
- Structural Systems (1)
- Structural characterization (1)
- Structural color (1)
- Structural integrity maintenance (1)
- Structural systems (1)
- Structure (1)
- Structure activity relationships (1)
- Structure health monitoring (1)
- Structure property relation (1)
- Structure solution (1)
- Strukturüberwachung (1)
- Study (1)
- Stählen (1)
- Störfall (1)
- Stützeffekte (1)
- Subsurface (1)
- Suction Bucket (1)
- Sulfide (1)
- Sulfide solid electrolytes (1)
- Sulfur (1)
- Sulfur cathodes (1)
- Sulphur (1)
- Superalloy (1)
- Superaustenite steel (1)
- Superconductor (1)
- Supercritical adsorption (1)
- Supercritical/dense phase CO 2 (1)
- Supermarktkälte (1)
- Superplasticizer (1)
- Supplementary Cementitious Materials (1)
- Support structures (1)
- Surface analysis (1)
- Surface characteristics (1)
- Surface chemistry (1)
- Surface engineering (1)
- Surface plasmon polaritons (1)
- Surface processing (1)
- Surface superconductivity (1)
- Surface texture (1)
- Surfaces, Coatings and Films (1)
- Survaillance of degradation (1)
- Sustainability (1)
- Sustainability and the Environment (1)
- Sustainability and the environment (1)
- Sustainable Route (1)
- Synchrotron Imaging (1)
- Synchrotron Tomography (1)
- Synchrotron X-Ray (1)
- Synchrotron X-ray imaging (1)
- Synchrotron X-ray tomography (1)
- Synergistic effects (1)
- Syngas (1)
- Synthesegas (1)
- Synthetic Aperture Focusing Technique (SAFT) (1)
- Synthetic Gas (1)
- System identification (1)
- Säurekondensation (1)
- TAHYA (1)
- TEKKEN Test (1)
- TGA (1)
- TKD (1)
- TMF-Versuch (1)
- TOP (1)
- TPED (1)
- TRC (1)
- TSA (1)
- TTS (1)
- TTS principle (1)
- Tandem Gas Metal Arc Welding (1)
- Tandem gas metal arc welding (1)
- Tandem welding (1)
- Tape casting (1)
- Technologie (1)
- Technologies (1)
- Teilentladungs Überwachung (1)
- Teilentladungssensorik (1)
- Temperatur (1)
- Temperature behavior (1)
- Temperature distribution determination (1)
- Temperature calibration (1)
- Temperature dependency (1)
- Temperaturgedächtnispolymere (1)
- Temperaturmessung (1)
- Tempered martensite ferritic steel (1)
- Tempered martensite ferritic steels (1)
- Tensile Strength (1)
- Tensile Testing (1)
- Tensile loading (1)
- Tensile test (1)
- Ternary (1)
- Test area (1)
- Test area hydrogen safety (1)
- Test procedure (1)
- Test standard (1)
- Testinfrastruktur (1)
- Testing Methods (1)
- Tests (1)
- Tetrapyrollic (1)
- Tetrapyrrolic active-site (1)
- Texturation (1)
- The MOUSE (1)
- The upper consequence limit as a control instrument (1)
- Theodorsen theory (1)
- Theoretical modelling (1)
- Theranostics (1)
- Therma-mechanical fatigue (1)
- Thermal (1)
- Thermal Spray (1)
- Thermal behaviour (1)
- Thermal desorption spectrometry (TDS) (1)
- Thermal energy storage (1)
- Thermal expansion (1)
- Thermal fatigue/shock (1)
- Thermal properties (1)
- Thermal simulation (1)
- Thermal stress (1)
- Thermik (1)
- Thermische Belastung (1)
- Thermische Betriebsbelastungen (1)
- Thermo-mechanical-loading (1)
- Thermo-mechanics (1)
- Thermo-rheologically simple/complex behaviour (1)
- Thermo-viscoplasticity (1)
- Thermodynamic data (1)
- Thermodynamic modelling (1)
- Thermodynamic simulation (1)
- Thermodynamische Modellierung (1)
- Thermoelectric generator design (1)
- Thermoelectric properties (1)
- Thermoelektrischer Generator (1)
- Thermographic testing (1)
- Thermographie (1)
- Thermomagnetic generator (1)
- Thermomechanics (1)
- Thermomechanik (1)
- Thermomechanische Eigenschaften (1)
- Thermoset polymers (1)
- Thin Films (1)
- Thin Films; (1)
- Thin Rod (1)
- Thin film metrology (1)
- Thin mesoporous films (1)
- Thrust (1)
- Ti oxide (1)
- Ti6Al4V alloys (1)
- Tie-down and stowage (1)
- Tiefe Temperaturen (1)
- Time Effect (1)
- Time dependent effect (1)
- Time dependent loading (1)
- Time of Flight - Secondary ion mass spectrometry (1)
- Time-of-Flight Mass Spectrometry (1)
- Time-of-Flight secondary ion mass spectrometry (1)
- Time-of-flight secondary ion mass spectrometry (1)
- Time-resolved coherent scattering (1)
- Time-resolved scattering (1)
- Time-temperature superposition principle (1)
- Time-temperature superposition/equivalent principle (1)
- Tip Buckling (1)
- Titania nanoparticles (1)
- Titanium Dioxide (1)
- Titanium dioxide (1)
- Tool wear (1)
- Total Scattering (1)
- Trace of degradation (1)
- Trailing vortex (1)
- Transformation of LNG terminals (1)
- Transformer Monitoring (1)
- Transient stresses (1)
- Transmission Electron Microscopy (1)
- Transmittance (1)
- Transport casks (1)
- Transport gefährlicher Güter (1)
- Transport number (1)
- Transport package for radioactive materials (1)
- Transport packages for radioactive material (1)
- Transport packages for radioactive materials (1)
- Transport- und Lagerbehälter für radioaktive Stoffe (1)
- Transportability (1)
- Transportation and storage cask (1)
- Transverse butt weld (1)
- Treatment (1)
- Tropfen (1)
- Trunnion design (1)
- Ttransport (1)
- Tube ring hydraulic pressure test (1)
- Tube trailer (1)
- Tubular joints (1)
- Tubular specimen technique (1)
- Tuffstein (1)
- Tungsten (1)
- Turbulent Wind Excitation (1)
- Turning (1)
- Twin-screw extrusion (TSE) (1)
- Typ (1)
- Typ A (1)
- Typ-B Versandstück (1)
- Type A (1)
- Type A package (1)
- Type IV pressure vessel (1)
- Type IV pressure vessels (1)
- UAV (1)
- UF6 (1)
- UHMWPE (1)
- UHPC (1)
- UN TDG Lithiumbatterien (1)
- UN composite cylinders (1)
- UN-Modellvorschriften (1)
- UN-service life check (1)
- UV-VIS (1)
- Ultra high molecular weight (1)
- Ultra high molecular weight polyethylene (1)
- Ultrafast laser processing (1)
- Ultrafast scattering (1)
- Ultraschall-Messtechnik (1)
- Ultrashort lasers (1)
- Ultrasonic Borehole Array (1)
- Ultrasonic Echo (1)
- Ultrasonic Guided Waves (1)
- Ultrasonic Testing (1)
- Ultrasonic inspection (1)
- Ultrasonic machining (1)
- Ultrasonic material determination (1)
- Ultrasonic-Echo Borehole Probe (1)
- Umformte Flaschen (1)
- Umweltgerechte Gestaltung (1)
- Umweltverträglichkeit (1)
- Underground Repositories (1)
- Underground gas storage (UGS) (1)
- Unknown storage duration (1)
- Unsteady pitching (1)
- Unterirdische Speicher (1)
- Unterpulverschweißen (1)
- Unterseekabel (1)
- Updated Lagrange Formulierung (1)
- Uptake estimation (1)
- Uranhexaflourid (1)
- Urban buses (1)
- Urban transport (1)
- Use-Case Wasserstofftankstelle (1)
- Useable resilience (1)
- Utilization, and storage (CCUS) technology (1)
- VAMAS (1)
- VOx catalyst (1)
- VRFB (1)
- Vacancies (1)
- Vacuum hot extraction (1)
- Vakuumheißextraktion (1)
- Validate method (1)
- Validation (1)
- Vanadium speciation (1)
- Variable frequency drive (1)
- Verbraucherschutz (1)
- Verbundanlagen (1)
- Verdichtungsinjektionen (1)
- Verflüssigt (1)
- Vergüteter hochfester Feinkornbaustahl (1)
- Verlängerte Zwischenlagerung (1)
- Verpackung (1)
- Verpackungen (1)
- Verpressung (1)
- Versagensmechanismus (1)
- Versagenstemperatur (1)
- Verschleiß (1)
- Verschleißreduktion (1)
- Versuchsplattform (1)
- Verteilte Sensorik (1)
- Verteilte faseroptische Sensoren (1)
- Vertrauen (1)
- Vertrauen in Wasserstofftechnologien (1)
- Verwaltungsschale (1)
- Verwaltungsvorgang (1)
- Very long term storage (1)
- Verzögerungswerte (1)
- Vessels (1)
- Vibration (1)
- Vickers (1)
- Vienna agreement (1)
- Virial coefficient (1)
- Viskoplastisch (1)
- Voltage Loss (1)
- Volumenbegrenzung (1)
- Volumetric uptake (1)
- Vorspannung (1)
- Völkerrechtliche Verträge (1)
- WAXS (1)
- WD-XRF (1)
- WEZ Aufhärtung (1)
- WKP (1)
- Wahrscheinlichkeit (1)
- Waiting time (1)
- Wasserstoff Café (1)
- Wasserstoff Hydrogen (1)
- Wasserstoff Referenzmaterial (1)
- Wasserstoff als Energieträger (1)
- Wasserstoff-Druckbehälter (1)
- Wasserstoff-Druckspeicherung (1)
- Wasserstoff-Qualität (1)
- Wasserstoff-Sicherheit (1)
- Wasserstoff-Wirtschaft (1)
- Wasserstoffanalytik (1)
- Wasserstoffbindungsverhalten (1)
- Wasserstoffdegradation (1)
- Wasserstoffdiffusion (1)
- Wasserstofffahrzeug (1)
- Wasserstofflagerung (1)
- Wasserstoffpermeation (1)
- Wasserstoffsensor (1)
- Wasserstoffsicherheit (1)
- Wasserstoffstrategie (1)
- Wasserstofftankstelle (1)
- Wasserstofftechnologie (1)
- Wasserstofftechnologien (1)
- Wasserstofftransport in Pipelines (1)
- Wasserstoffunterstütze Kaltrissbildung (1)
- Waste Packages (1)
- Waste chracterization (1)
- Waste heat (1)
- Waste packages (1)
- Wastewater (1)
- Water (1)
- Water Distribution (1)
- Water distribution (1)
- Water electrolysis (1)
- Water management (1)
- Water reduction (1)
- Water transport (1)
- Water-structure interaction (1)
- Wave-Tower interaction (1)
- Weibull distribution parameters (1)
- Weibull parameter (1)
- Weibull parameters (1)
- Weibull-Verteilung (1)
- Weld (1)
- Weld Joint (1)
- Weld fatigue (1)
- Weld imperfections (1)
- Weld joint (1)
- Weld seam geometry (1)
- Welded (1)
- Welded joints (1)
- Wellenausbreitung (1)
- Werkstoff (1)
- Werkstoffe (1)
- Werkstoffkompatibilität (1)
- Werkzeuglebensdauer (1)
- Wet Content (1)
- Wetting (1)
- White light interferometric microscopy (1)
- Whole-chain CCS scenario (1)
- Wilhelm Conrad Röntgen (1)
- Wind Energy Structures (1)
- Wind energy business (1)
- Wind rotor blade (1)
- Wind turbine blade shell structures (1)
- Wind turbines (1)
- Wind-farm aerodynamics (1)
- Windbelastung (1)
- Windeneergie (1)
- Windenergie Anlage Rotorblätter (1)
- Windenergie anlage rotorblätter (1)
- Windenergieanlage (1)
- Windenergieanlagen (1)
- Windfarm wake analysis (1)
- Windkanalversuche (1)
- Windkraft (1)
- Windturbine (1)
- Windturm (1)
- Wireless (1)
- Wirtsgestein (1)
- Wissenschaftliche Politikberatung (1)
- Wood chips (1)
- Wood fire (1)
- Woody biomass (1)
- Workability (1)
- Wärmeeinflusszone (1)
- Wärmespeicher (1)
- Wäschetrockner (1)
- X-Ray (1)
- X-Ray imaging (1)
- X-ray CT (1)
- X-ray Computed tomography (1)
- X-ray computed tomography (1)
- X-ray fluorescence spectroscopy (1)
- X-ray refraction (1)
- X20Cr13 steel (1)
- XL-CT (1)
- XPS (1)
- XRD (1)
- Yellowing (1)
- Yellowness index (1)
- Young´s Modulus (1)
- ZIF-8 (1)
- ZIRLO® (1)
- Zearalenon (1)
- Zerstörungsfreie Prüfung (ZfP) (1)
- Zerstörungsfreie Zustandsüberwachung (1)
- Zertifikat (1)
- Zr-Modifier (1)
- Zufallszahl (1)
- Zugtragfähigkeit (1)
- Zulassungspflichtige Versandstücke (1)
- Zustimmungen (1)
- Zuständige Behörde (1)
- Zuständigkeit (1)
- Zyklische Dampfoxidation (1)
- Zyklisches Tragverhalten (1)
- Zündquelle (1)
- aerosol deposition method (ADM) (1)
- ageing (1)
- air conditioner (1)
- alkali-activated material (1)
- arbon capture (1)
- ausfgallfreie Lastwechsel (1)
- battery ageing (1)
- bended arrow of time (1)
- biodiesel (1)
- biofuels (1)
- building information modelling (1)
- burst test (1)
- calcium cobaltite (1)
- carbon capture and storage (1)
- carbon steel (1)
- chance-risk analysis (1)
- cold neutrons (1)
- composite materials (FRP) (1)
- composites (1)
- condensate (1)
- conferences (1)
- copper (1)
- creep behaviour (1)
- crystal orientation (1)
- dielectric spectroscopy (1)
- distributed backscatter measurement (1)
- editorial (1)
- electrochemical characterization (1)
- electron paramagnetic resonance spectroscopy (1)
- energy gases (1)
- energy label (1)
- energy storage (1)
- equation of state (1)
- explosion groups (1)
- explosion limits (1)
- explosion protection (1)
- extended storage (1)
- extreme temperature (1)
- fatigue test (1)
- gamma irradiation (1)
- gamma radiation (1)
- gas separation membranes (1)
- gas storage (1)
- gefährliche Güter im Luftverkehr (1)
- geothermal energy (1)
- high power welding (1)
- hochfester Stahl (1)
- hydrogen enriched natural gas (1)
- hydrogen safety (1)
- hydrogen storage (1)
- hydrogen transport (1)
- impurities (1)
- iron embrittlement (1)
- leakage (1)
- li-ion batteries (1)
- life cycle test (1)
- magnetischer Streufluss (1)
- maximum acceptable consequence (1)
- meteorologischer Einfluss (1)
- methane (1)
- methane/hydrogen-mixtures (1)
- metrology (1)
- model of constant adiabatic flame temperatures (CAFT) (1)
- modulare Pipelineanlage (1)
- molecular mobility (1)
- monitoring (1)
- nanocrystals (1)
- neutron imaging (1)
- neutron instrumentation (1)
- nuclear waste disposal (1)
- optical fiber sensor (1)
- optical fiber sensors (1)
- photoluminescence quantum yield (1)
- photovoltaics (1)
- pitting corrosion (1)
- plasticization (1)
- polyethylene (1)
- polymer optical fiber (POF) sensor (1)
- polymers (1)
- polymers of intrinsic microporosity (1)
- polynorbornenes (1)
- power-to-gas (1)
- pressure-volume product (1)
- radiation effects (1)
- radiation hardness (1)
- radiation induced attenuation (1)
- radioactive waste (1)
- radioaktives Material (1)
- risk limit (1)
- risk, reliability, inspection planning, offshore wind turbines (1)
- rotor balde (1)
- rubber (1)
- safety assessment (1)
- sandwich (1)
- scatter (1)
- schwach und mittel radioaktive Abfälle (1)
- shell (1)
- single-sinker densimeter (1)
- solar cell (1)
- solid microanalysis (1)
- sorption (1)
- specific risk value (1)
- spent fuel storage (1)
- statistische Auswertung (1)
- steel (1)
- storage (1)
- stress relaxation (1)
- structural integrity management (1)
- sulfidation (1)
- support structures (1)
- t90-Zeit (1)
- test method (1)
- thermoelectric oxide (1)
- thermoelectrics (1)
- thermography (1)
- thick metal plate welding (1)
- time-temperature equivalent formulation (1)
- time-temperature superposition principle (1)
- traceable standards (1)
- trade fair (1)
- u-p-Formulierung (1)
- utilization, and storage (CCUS) technology (1)
- zertifizierte Referenzmaterialien (1)
- Äquivalente Spannungskonzentrationsfaktoren (1)
- Ökdoesign (1)
- Ökobilanzierung (1)
- Ökodeisgn (1)
- Örtliche Korrosion (1)
- Überkritisch (1)
- Überwachung (1)
- Überwachungsverfahren (1)
- Δμ XANES (1)
Organisationseinheit der BAM
- 3 Gefahrgutumschließungen; Energiespeicher (506)
- 9 Komponentensicherheit (306)
- 7 Bauwerkssicherheit (257)
- 8 Zerstörungsfreie Prüfung (241)
- 9.4 Integrität von Schweißverbindungen (183)
- 6 Materialchemie (166)
- 5 Werkstofftechnik (164)
- 3.3 Sicherheit von Transportbehältern (156)
- 3.4 Sicherheit von Lagerbehältern (147)
- 7.2 Ingenieurbau (115)
Paper des Monats
- ja (23)
In this work, the thermoelectric material calcium cobaltite Ca3Co4O9 (CCO), a promising p-type conducting thermoelectric oxide with anisotropic properties, was processed by the powder aerosol deposition method (PAD) to form a dense ceramic CCO film with a thickness in the µm range. The prepared films were characterized regarding their microstructure and thermoelectric properties between room temperature and 900 °C. After heat treatment at 900 °C, the CCO PAD film in-plane shows excellent properties in terms of electrical conductivity (280 S/cm at 900 °C) and Seebeck coefficient (220 µV/K at 900 °C). The calculated power factor in-plane (ab) reaches with 1125 µW/(m K2) 40 % of the single crystal value, surpassing the known-properties of CCO bulk ceramics. Examination of the microstructure shows a strong fiber texture of the film as well as a strong coarsening of the grains during the first heat treatment up to 900 °C.
Development and fundamental understanding of precious-group-metal-free electrocatalysts is hampered by limitations in the quantification of the intrinsic activity of different catalytic sites and understanding the different reaction mechanisms. Comparing isomorphic nitrogen-doped carbons, Zn-N-Cs and Fe-N-Cs with the common tetrapyrrolic motif, a catalyst-independent outer-sphere rate-determining step in the alkaline oxygen reduction reaction is observed. Density functional theory (DFT) simulations on tetrapyrrolic model structures indicate the highest occupied molecular orbital (HOMO) level as a good descriptor for the catalytic activity. Contour plots suggest that the electron transfer occurs directly from the tetrapyrrolic coordination site, rather than from the metal center. Metal-free tetrapyrrolic N4 sites are discovered to be highly active oxygen reduction reaction (ORR) active sites in alkaline that reach turnover frequencies (TOF) of 0.33 and 1.84 s−1 at 0.80 and 0.75 VRHE in the order of magnitude of tetrapyrrolic Fe–N4 sites in the acidic ORR. While Zn-coordination lowers the HOMO level and therefore the catalytic activity, Fe-coordination lifts the HOMO level resulting in TOF values of 0.4 and 4 s−1 for tetrapyrrolic Fe–N4 sites at 0.90 and 0.85 VRHE, respectively. At higher mass activities, the peroxide reduction becomes rate-limiting, where highest peroxide production rates are observed for the nitrogen-doped carbon.
The following contribution presents the analyses of additively manufactured (AM) 316L using hollow specimens at 200 bar hydrogen and a strain rate of 1E-5 s-1. The work includes a comparison of three types of hollow specimens: mechanically extracted from fully additively manufactured cylinders, near-net-shape additively manufactured specimens, i.e. as printed, and specimens made of conventional 316L. AM specimens were manufactured via powder bed fusion with laser beam of metals (PBF-LB/M). For the near-net-shape specimens the inner hole remained without any mechanical processing. The inner holes of the cylindric specimens were manufactured by drilling with subsequent honing.
The susceptibility to hydrogen embrittlement was found to be strongly dependent on the surface being in contact with hydrogen. While specimens with a clean surface had a relative reduction of area (RRA) of around 78 %, those with an as-printed surface showed a significantly larger RRA of around 90 %. One possible reason for this are oxide layers formed due to small amounts of oxygen during the AM-process.
Further research is required to determine if the lower effect on the mechanical properties is permanently for as printed parts or e.g. time dependent. Additionally, further work with variation in the nominal strain rate is required.
The constantly increasing demand for renewable energy sources lead to the necessity of transporting large amounts of hydrogen. Since pipelines enable a cost-effective way for the distribution of gaseous hydrogen, the interaction of hydrogen and the pipeline materials must be carefully investigated as hydrogen can cause a degradation of the mechanical properties under certain conditions. Especially welds, which are assumed to be more susceptible to the degradation enhanced by hydrogen, are of great interest. The aim of this study is to investigate the effect of gaseous hydrogen on the mechanical properties of an X65 pipeline, and the longitudinal submerged arc welding (SAW) welded joint. The tests are conducted using the hollow specimen technique on two types of specimens: one extracted from the base material (BM) and the other extracted as a cross-weld (CW) specimen consisting of base material and weld seam. The specimens are charged in-situ under a pressure of 60 bar and tested using slow strain rate (SSR) tensile tests with a nominal strain rate of 10-5 s-1. The performed tests showed a decrease of the reduction of area (RA) from 72% in inert atmosphere to 52% in hydrogen atmosphere for the CW-specimen and a decrease from 73% in inert atmosphere to 51% for the BM. Metallographic analyses showed the crack initiation between fine grain heat affected zone (FGHAZ) and BM for the specimens tested in hydrogen atmosphere as well as for the reference specimens. This leads to the conclusion that the location of the crack initiation does not change due to the presence of gaseous hydrogen.
Das Laserstrahl-Lichtbogen-Hybridschweißverfahren kombiniert Laserstrahl- und Lichtbogenschweißverfahren in einem gemeinsamen Schmelzbad. Das Verfahren wurde Ende der 70er Jahre entwickelt, um die Synergieeffekte der Schweißprozesse effektiv zu nutzen. Durch die hohe Strahlungsintensität des Laserstrahls werden hohe Einschweißtiefen erreicht. Es ist möglich, die Anzahl der Schweißlagen zu reduzieren und somit die thermische Belastung des Grundwerkstoffes zu senken, da der Wärmeeintrag verringert wird. Die Überbrückung von Spalten und Kantenversatz kann durch die Zufuhr eines geschmolzenen Zusatzdrahtes durch das MSG-Verfahren erreicht werden. Der Zusatzdraht kann zudem das metallurgische Gefüge positiv beeinflussen. Daher ist das Laser-Hybridschweißverfahren ideal für das einlagige Schweißen von Dickblechen und wird bereits erfolgreich in der Schiffbauindustrie zum Schweißen von Blechen mit einer Dicke von bis zu 15 mm verwendet. Obwohl Hochleistungslaser heutzutage bereits im Multi-Kilowatt-Bereich verfügbar sind, sind sie für den industriellen Einsatz nur auf Stahlbleche mit einer Dicke von max. 15 mm geeignet. Hohe Abkühlgeschwindigkeiten, gravitationsbedingtes Austropfen beim einlagigen Schweißen von Dickblechen, Prozessinstabilitäten bei höheren Laserleistungen und Schweißnahtimperfektionen wie Rissbildung sind einige Faktoren, die den Einsatz von Laser-Hybridschweißtechnologien aktuell begrenzen. Ohne eine Badstütze ist eine Verringerung der Schweißgeschwindigkeit und somit der Abkühlgeschwindigkeit aufgrund unzulässiger Wurzelüberhöhungen oder gravitationsbedingtem Austropfen nicht möglich. Bei herkömmlichen Badstützen ist es allerdings erforderlich, dass sie mechanisch befestigt und die Wurzel entfernt oder nachbearbeitet werden muss. In dieser Arbeit wird als Alternative das innovative Konzept der elektromagnetischen Schweißbadsicherung vorgestellt und die Fähigkeiten dieses Verfahrens erläutert.
Auf dem Weg zum einlagigen Schweißen von dickwandigen Bauteilen – Prozesse, Potenziale, Beispiele
(2024)
Bislang kommt das Laserstrahlschweißen bzw. Laserhybridschweißen hauptsächlich bei Dickblechen mit einer Wandstärke von bis zu 15 mm zum Einsatz. Für Anwendungen über 20 mm war dieses Verfahren aufgrund einiger Herausforderungen bisher nur bedingt realisierbar. Die von der Ausgründung WeldNova GmbH der Bundesanstalt für Materialforschung und -prüfung (BAM) entwickelte Schweißbadsicherung ermöglicht nun ein einlagiges Schweißen von bis zu 40 mm Wandstärken mit einer Laserleistung von bis zu 20 kW.
A new hydrogen-based test rig is being developed for a feasibility study on the use of hydrogen as an energy source for thermal testing in accordance with the IAEA SSR-6 guidelines for transport packages containing radioactive materials.
The test rig will be capable of combusting hydrogen for a wide range of different burner geometries, mass flows and if necessary hydrogen blends. As this type of fire test according to the IAEA boundary conditions (SSR-6 & SSG-26) does not yet exist, a large number of preliminary investigations, safety assessments and calculations must be carried out in order to develop a viable concept for hydrogen fires.
A new hydrogen-based test rig is being developed for a feasibility study on the use of hydrogen as an energy source for thermal testing in accordance with the IAEA SSR-6 guidelines for transport packages containing radioactive materials.
The test rig will be capable of combusting hydrogen for a wide range of different burner geometries, mass flows and if necessary hydrogen blends. As this type of fire test according to the IAEA boundary conditions (SSR-6 & SSG-26) does not yet exist, a large number of preliminary investigations, safety assessments and calculations must be carried out in order to develop a viable concept for hydrogen fires.
To safely dispose of nuclear waste in underground facilities, engineered barrier systems are needed to seal shafts and galleries. The material used in these barriers must be adapted to the host rock parameters. Shrinking and cracking must be avoided to provide a barrier with almost zero permeability. For repositories in salt rock environments, several types of salt concrete (SC) are possible construction materials.
Within the project SealWasteSafe, we compared the behavior of an innovative alkali-activated material (AAM) with standard SC in their hydration and hardening phase. To monitor the microstructural changes within the two materials SC and AAM, acoustic emission (AE) signals have been recorded for up to ~250 days on 340-liter-cubic specimens.
The phenomenon of AE is defined as the emission of elastic waves in materials due to the release of localized internal energy. Such energy release can be caused by the nucleation of micro-fracture, e.g., in concrete while curing or when exposed to load. The occurrence of AE events gives first rough indications of microstructural changes and potentially occurring cracking and thus, provides insights for structural health monitoring (SHM).
The results show, that for the first 28 days after casting, less AE activity was detected in the AAM compared to SC. After 61 days, in the AAM material, the number of AE events exceeded those observed in the SC. However, the majority of the AE detected and located in AAM was related to surface effects, and not to microstructural changes or occurring cracks within the bulk volume. Additionally, the source location analysis indicated, that despite lower activity in SC, we observed some clustering of the events. In contrast, in AAM, the activity inside the specimen is randomly distributed over the whole volume. The monitoring results help to estimate the material’s sealing properties which are crucial to assess their applicability as sealing material for engineered barriers.
The crucial part of nuclear waste storage is the construction of sealing structures made of reliable, well-understood, and safe materials. Within the SealWasteSafe project, we compared the performance of an innovative alkali-activated material (AAM) and standard salt concrete (SC), as potential materials for sealing structures for nuclear waste repositories. Two 340-liter-cubic specimens were studied for up to ~250 days by a multisensory monitoring setup. Specifically, the long-term acoustic emission monitoring aimed to analyze the development of microstructural changes within materials.
The monitoring analysis showed fewer acoustic emission events in AAM compared to SC in the first 61 days. After approximately two months of monitoring, the number of AE events in AAM significantly exceeded the number of events in SC. The analysis showed, however, that the increased AE activity was mainly caused by surface effects of the AAM material and not by the formation of cracks within the material.
This contribution presents the use of acoustic emission analysis, both in the time and frequency domains, for monitoring and characterization of materials with potential use as engineering barriers for nuclear waste repositories.
One of the major tasks in nuclear waste management is to design safe and reliable sealing structures for radioactive waste repositories. Particularly for salt as a host rock, engineered barrier systems for underground waste disposal must be constructed of well-understood (cementitious) materials that will sustain environmental conditions and ensure high durability.
Within the SealWasteSafe project, we studied two materials with a potential for sealing structures for nuclear waste repositories: an innovative alkali-activated material (AAM) and standard salt concrete (SC). To analyze the development of microstructural changes within the materials, we monitored microseismicity (aka acoustic emission monitoring) occurring during the hardening and setting period in two 340-liter-cubic specimens for up to ~250 days.
The monitoring results showed, that in the first 61 days, fewer events occurred in AAM compared to SC. After this time the number of events in AAM sharply increased and significantly exceeded those observed in SC. However, the source localization analysis revealed that the increase of microseismicity in AAM material was not related to the formation of macro-cracks within the material but was mainly caused by the surface effects. Accompanying analysis of the test specimens with additional methods (such as e.g., X-ray CT) proved that no macro-cracks were observed inside the AAM specimen. Further analysis in the time and frequency domains helped to characterize the tested materials and to estimate their potential to be used for engineered barriers in nuclear waste repositories.
Overall, our study shows the potential of microseismicity monitoring for feasibility studies and quality assurance in a broad range of applications, also in structural health monitoring.
Ni-Fe oxide nanoparticles have gained a lot of interest because of their high activity in the oxygen evolution reaction (OER) which is crucial for water splitting. [1] Although there have been great efforts in the last years, the understanding of the synergistic effect between Fe and Ni is still under discussion.
Therefore, we prepared different Ni-Fe oxide nanoparticles with different compositions from pure iron oxide to pure nickel oxide adapting a known procedure. [2,3] Size and morphology of the nanoparticles depend on the composition which was shown with Transmission Electron Microscopy (TEM). The compositions of the nanoparticles were measured with a comparative approach using X-ray Photoelectron Spectroscopy (XPS), Hard X-ray Photoelectron Spectroscopy (HAXPES), and Energy Dispersive X-Ray Spectroscopy (EDS) coupled with the TEM providing detailed chemical information of the nanoparticles in different sample regions. EDS reveals that the different sample regions are dominated by one of the components, Fe or Ni, but a slight mixing between the components can be found (see Figure 1), which was confirmed with X-ray Diffraction (XRD). XPS indicates the enrichment of Fe at the sample surface, while HAXPES and EDS data agree on the stoichiometry of the bulk. High-resolution XPS and HAXPES exhibit some differences in the valence states of Fe and Ni, whereas Ni seems to be easier to reduce than Fe. Further investigations combining these different techniques and additionally Secondary Ion Mass Spectrometry (ToF-SIMS) are ongoing by using in situ approaches and coupling cyclic voltammetry to the analytical techniques.
The key for a transition into clean energy sources is based on the construction of safe energy infrastructure, such as transportation pipelines for Hydrogen. Duplex Stainless Steels (DSS) are an essential component used nowadays in the construction of transportation pipelines because of their many distinctive qualities. The choice of DSS for a particular hydrogen application mainly depends on its susceptibility level to Hydrogen Embrittlement (HE) or Hydrogen Assisted Cracking (HAC). Since the 20th century, the literature indicates three factors that must be considered: the microstructure of the alloy steel, the hydrogen concentration, and the mechanical load. Several mechanisms have been also proposed to describe the occurring microscale processes behind HE or HAC, and these include metastable phase transformation, Hydrogen Enhanced Localized Plasticity (HELP), and Hydrogen Enhanced Decohesion (HEDE).
The following contribution describes the path to ascertain if DSS is suitable for high-pressure gaseous hydrogen applications. The interplay between several critical factors that result in HAC was examined using high-pressure gaseous hydrogen charging, Electron Backscatter Diffraction (EBSD), and hydrogen concentration measurements using Carrier Gas Hot Extraction (CGHE). It was determined whether the strain-induced martensitic transformation of the austenite was present in a DSS 1.4462 (DSS2205) in-service pipe and in samples of freshly charged DSS 1.4462. In comparison to the common electrochemical charging described broadly in the literature, no major direct martensitic phase transformation of the austenite phase under a high-pressure hydrogen environment was observed. As for future experiments, the intention is to analyse the impact of high-pressure gaseous hydrogen on the welded components of this grade, and under mechanical load via the hollow specimen technique.
To accelerate the transition to a low-carbon economy while exploiting existing infrastructure, hydrogen can be injected to the natural gas network. However, many technical and regulatory gaps should be closed, and adaptations and investments made to ensure that multi-gas networks across Europe will be able to operate in a reliable and safe way while providing a highly controllable gas quality and required energy demand. The SHIMMER project aims to enable a higher integration and safer hydrogen injection management in multi-gas networks by contributing to the knowledge and better understanding of hydrogen projects, their risks, and opportunities.
Wir stellen unseren Ansatz und unsere Methodik zur Simulation von Piping-Erosion vor, welche während des Installationsprozesses von Suction Bucket Fundamenten für Offshore-Windkraftanlagen auftreten kann und ein kritisches Versagen des Installationsprozesses darstellt. Wir zeigen die Ergebnisse mehrere Simulationen und analysieren die hydrodynamischen und Kontaktkräfte, die auf das granulare Medium wirken, sowie die Druckdifferenz der flüssigen Phase. Solche Simulationen können zum besseren Verständnis von Piping-Erosion und letztendlich zu dessen Verhinderung beitragen.
For industrial applications dealing with hydrogen, the definition of safety distances and the assessment of possible hazards emanating from releases is mandatory. Since hydrogen is usually stored and transported under pressure, one scenario to be considered is the momentum driven release of hydrogen from a leakage with subsequent ignition. In this scenario, the emitted heat radiation from the resulting jet flame to the surroundings has to be determined to define adequate safety distances. For hydrocarbon flames, different jet flame models are available to assess the hazards resulting from an ignited jet release. Since hydrogen flames differ from hydrocarbon flames in their combustion behavior, it has to be checked if these models are also applicable for hydrogen. To evaluate the accuracy of these models for hydrogen jet flames, tests at real-scale are carried out at the BAM Test Site for Technical Safety (BAM-TTS). Herein, the flame geometry and the heat radiation at defined locations in the surroundings are recorded for varying release parameters such as leakage diameter (currently up to 30 mm), release pressure (currently up to max. 250 bar) and mass flow (up to max. 0.5 kg/s). The challenge here is the characterization of the flame geometry in an open environment and its impact on the thermal radiation. Existing heat radiation data from the literature are mostly based on unsteady outflow conditions. For a better comparability with the steady state jet flame models, the experiments presented here are focused on ensuring a constant mass flow over the release duration to obtain a (quasi) stationary jet flame. In addition, stationary outflow tests with hydrocarbons (methane) were also carried out, which are intended to serve as reference tests for checking flame models based on hydrocarbon data.
Transportierbarkeit von Transport- und Lagerbehältern für radioaktive Stoffe, welche nach eine längerfristigen trockenen Zwischenlagerung
transportiert werden müssen. Überblick über die aktuellen Regelwerke und Richtlinien sowie die Zeitpläne für das Finden eines Endlagers für hochradioaktive Stoffe und die damit verbundene verlängerte Zwischenlagerung. Des Weiteren werden das für die verlängerte Zwischenlagerung notwendige Alterungsmanagement und die noch erforderlichen Forschungstätigkeiten vorgestellt.
Transportierbarkeit von Transport- und Lagerbehältern für radioaktive Stoffe, welche nach eine längerfristigen trockenen Zwischenlagerung
transportiert werden müssen. Überblick über die aktuellen Regelwerke und Richtlinien sowie die Zeitpläne für das Finden eines Endlagers für hochradioaktive Stoffe und die damit verbundene verlängerte Zwischenlagerung. Des Weiteren werden das für die verlängerte Zwischenlagerung notwendige Alterungsmanagement und die noch erforderlichen Forschungstätigkeiten vorgestellt.
Hydrogen gas plays a key role in the European energy transition strategy. When transmitting and storing compressed hydrogen gas, safety is one of the most important conditions. With increasing hydrogen pressure and temperature, more hydrogen is absorbed by the steel components, such as pipelines or valves, and may lead to embrittlement. Although, a deep understanding of microstructure on the hydrogen solubility in steels is missing. Classical Sieverts’ law is only valid at high temperatures and low gas pressures. For that purpose, new theory is presented, which explains the role of microstructure on hydrogen solubility. Hydrogen trapping at microstructural defects is a thermally activated mechanism and causes an increase of the hydrogen solubility with decreasing temperatures. This mechanism has to be considered in cryogenic applications, such liquid or compressed hydrogen storage.
The injection of hydrogen into the natural-gas grid is an alternative during the process of a gradual decarbonization of the heat and power supply. When dealing with hydrogen-enriched natural gas mixtures, the performance of the reference equations of state habitually used for natural gas should be validated by using high-precision experimental thermophysical data from multicomponent reference mixtures prepared with the lowest possible uncertainty in composition. In this work, we present experimental density data for an 11-compound high-calorific (hydrogen-free) natural gas mixture and for two derived hydrogen-enriched natural gas mixtures prepared by adding (10 and 20) mol-% of hydrogen to the original standard natural gas mixture. The three mixtures were prepared gravimetrically according to ISO 6142–1 for maximum precision in their composition and thus qualify for reference materials. A single-sinker densimeter was used to determine the density of the mixtures from (250–350) K and up to 20 MPa. The experimental density results of this work have been compared to the densities calculated by three different reference equations of state for natural gas related mixtures: the AGA8-DC92 EoS, the GERG-2008 EoS, and an improved version of the GERG-2008 EoS. While relative deviations of the experimental density data for the hydrogen-free natural gas mixture are always within the claimed uncertainty of the three considered equations of state, larger deviations can be observed for the hydrogen-enriched natural gas mixtures from any of the three equations of state, especially for the lowest temperature and the highest pressures.
The hollow specimen technique is a simple and economical method
that has the potential to overcome the limitations and complement
the current techniques for qualifying metallic materials under highpressure
hydrogen gas.
In this technique, an axial hole is manufactured in a tensile
specimen, which is then filled with hydrogen gas, sealed, and
placed in a standard testing machine. This method requires
significantly lower amounts of hydrogen, resulting in fewer safety
measures and does not require complex equipment or a specialised
laboratory, unlike the conventional autoclave technique.
Initial studies have demonstrated the feasibility of assessing
hydrogen effects in metallic materials using the hollow specimen
technique. This led to the establishment of the committee ISO/TC
164/SC 1/WG 9 to standardise the method, however, there are still
open questions that currently prevent the technique from being
standardised for hydrogen testing. These open questions are being
addressed in the H2HohlZug project, which is presented in this
contribution.
The use of hydrogen demands high safety requirements, since hydrogen can be absorbed by metallic materials and may cause hydrogen embrittlement (HE) under certain conditions. Slow strain rate (SSR) tensile testing is a widespread method to quantify the hydrogen-induced ductility loss of alloys. Here, the hollow specimen technique was used to evaluate the effect of 150 bar hydrogen on the tensile properties of solution annealed and hardened 100Cr6 steel, which is a common material for bearing systems. This technique reduces the required amount of hydrogen and minimizes the duration and costs of the tests performed compared to in-situ tensile tests in autoclaves.
The growing demand for hydrogen requires an expansion of testing capabilities to assess the performance of metallic materials under hydrogen exposure. Considering only gaseous atmospheres, there is a variety of in-situ and ex-situ methods used to investigate the material behavior while or after exposed to hydrogen, respectively.
Among these methods, a more conservative one is the in-situ testing at slow strain rates (SSRT) using conventional tensile specimens. While results obtained by a conservative procedure may be more applicable in many cases than those of ex-situ experiments, the tests are quite demanding, leading to limited testing capacities and high costs, especially for very slow strain rates. A possible solution that can enable in-situ testing at relatively low cost is the hollow specimen technique which gained increasing interest in the last decade. The main reasons are the minimal volume of hydrogen required and the elimination of a high-pressure hydrogen autoclave leading to significantly lower costs and enabling more laboratories worldwide to perform these tests. However, interpreting results from hollow specimens, especially when compared to conventional ones, remains a significant challenge.
To address this, an experimental study was conducted using conventional and hollow specimens, both uncharged and pre-charged. Pre-charging was achieved using pure hydrogen (5.0, i.e. 99.999 %) at 100 bar and 300 °C for around 21 days. In order to obtain suitable reference specimens, other specimens were stored in argon at 100 bar and 300 °C for the same period of time. The tests were performed at various strain rates, down to 1E-6 1/s.
While these ex-situ experiments are not directly comparable to in-situ tests with both types of specimens, they do provide some insights into the differences between the results of hollow and conventional specimens. Therefore, the elongation at fracture and reduction of area (RA) were compared, among other aspects. In addition, fractographical analyses were carried out using SEM images. Elongation at fracture was not significantly affected by hydrogen in conventional specimens, but it was slightly reduced in hollow specimens. RA, on the other hand, was lower for tests with hydrogen in both types of specimens across all strain rates. Moreover, the strain rate did not appear to influence hydrogen embrittlement in conventional specimens whereas in hollow specimens, tests conducted at higher strain rates (1E-4 1/s) showed a greater impact of hydrogen on elongation at fracture than those at lower strain rates (1E-6 1/s), which is contrary to the typical expectation.
These findings suggest that the influence of hydrogen differs between conventional and hollow specimens, possibly due to factors such as surface roughness and differing stress states. However, further experiments are needed to fully understand these differences, including in-situ experiments to understand potential differences in hydrogen absorption between the two specimen types.
Wasserstoff als Energieträger gewinnt zunehmend an Bedeutung. Die Untersuchung von Störfallauswirkungen mit Wasserstoff rückt somit stärker in den Fokus. Da Wasserstoff meist unter Druck gelagert und transportiert wird, ist ein zu betrachtendes Szenario die Freisetzung aus einer Leckage mit anschließender Zündung. Die daraus resultierende Freistrahlflamme (Jet Flame) muss hinsichtlich der in die Umgebung emittierten Wärmestrahlung charakterisiert werden. In der Literatur existieren bereits verschiedene Modelle ([1], [2]), welche jedoch vermehrt auf Daten aus Kohlenwasserstoffflammen mit geringem Impuls basieren. Zur Überprüfung dieser Modelle wird im Zuge des BAM internen H2 Jet Flame Projektes die sicherheitstechnische Untersuchung von impulsbehafteten Wasserstoff Freistrahlflammen vorgenommen. Hierfür finden Versuche im Realmaßstab auf dem Testgelände Technische Sicherheit der BAM (BAM-TTS) statt. Gegenstand der Untersuchungen ist die Beurteilung der Auswirkungen von realistischen Freisetzungsszenarien hinsichtlich der Flammengeometrie und der freigesetzten Wärmestrahlung. Dabei werden Parameter wie Freisetzungswinkel, Leckagedurchmesser (z.Zt. 1 mm bis 10 mm), Druck (z.Zt. bis max. 250 bar) und Massenstrom (bis max. 0,5 kg/s) variiert. Zusätzlich können auch Einflüsse wie Art der Zündung, Zündort sowie Zündung mit zeitlichem Verzug untersucht werden. Gewonnene Erkenntnisse werden mit den Ergebnissen bereits vorhandener Modelle verglichen und diese im Bedarfsfall weiterentwickelt. Insbesondere wird der Fokus auf die Modellierung der freigesetzten Wärmestrahlung von Wasserstoffflammen gelegt. Herausforderung dabei stellt die IR-Vermessung und Modellierung von Sichtmodellen der Flammen dar. Die Visualisierung der Flammengeometrie wird mit Hilfe mehrerer Infrarot Kamerasystemen (aus mindestens zwei Blickwinkeln) vorgenommen.
Bisherige Messungen, die in der Literatur zu finden sind, basieren meist auf instationären Auströmbedingungen. Der hier verwendete Versuchsaufbau ermöglicht ein stationäres Ausströmen für mehrere Minuten und somit eine direkte Vergleichbarkeit mit den existierenden (stationären) Modellen.
Weiterhin ist der Versuchsstand umrüstbar für Vergleichsmessungen mit Kohlenwasserstoffen (Methan etc.) sowie Mischungen aus Wasserstoff und Kohlenwasserstoffen.
For industrial applications dealing with hydrogen, the definition of safety distances and the assessment of possible hazards emanating from releases is mandatory. Since hydrogen is usually stored and transported under pressure, one scenario to be considered is the momentum driven release of hydrogen from a leakage with subsequent ignition. In this scenario, the emitted heat radiation from the resulting jet flame to the surroundings has to be determined to define adequate safety distances. For hydrocarbon flames, different jet flame models are available to assess the hazards resulting from an ignited jet release. Since hydrogen flames differ from hydrocarbon flames in their combustion behavior, it has to be checked if these models are also applicable for hydrogen. To evaluate the accuracy of these models for hydrogen jet flames, tests at real-scale are carried out at the BAM Test Site for Technical Safety (BAM-TTS). Herein, the flame geometry and the heat radiation at defined locations in the surroundings are recorded for varying release parameters such as leakage diameter (currently up to 30 mm), release pressure (currently up to max. 250 bar) and mass flow (up to max. 0.5 kg/s). The challenge here is the characterization of the flame geometry in an open environment and its impact on the thermal radiation. Existing heat radiation data from the literature are mostly based on unsteady outflow conditions. For a better comparability with the steady state jet flame models, the experiments presented here are focused on ensuring a constant mass flow over the release duration to obtain a (quasi) stationary jet flame. In addition, stationary outflow tests with hydrocarbons (methane) were also carried out, which are intended to serve as reference tests for checking flame models based on hydrocarbon data.
To safely dispose of nuclear waste in underground facilities, engineered barrier systems are needed to seal shafts and galleries. The material used in these barriers must be adapted to the host rock parameters. Shrinking and cracking must be avoided to provide a barrier with almost zero permeability. For repositories in salt rock environments, several types of salt concrete (SC) are possible construction materials. Within the project SealWasteSafe, we compared the behavior of an innovative alkali-activated material (AAM) with standard SC in their hydration and hardening phase. To monitor the microstructural changes within the two materials SC and AAM, acoustic emission (AE) signals have been recorded for up to ~250 days on 340-litercubic specimens. The phenomenon of AE is defined as the emission of elastic waves in materials due to the release of localized internal energy. Such energy release can be caused by the nucleation of micro-fracture, e.g., in concrete while curing or when exposed to load. The occurrence of AE events gives first rough indications of microstructural changes and potentially occurring cracking and thus, provides insights for structural health monitoring (SHM). The results show, that for the first 28 days after casting, less AE activity was detected in the AAM compared to SC. After 61 days, in the AAM material, the number of AE events exceeded those observed in the SC. However, the majority of the AE detected and located in AAM was related to surface effects, and not to microstructural changes or occurring cracks within the bulk volume. Additionally, the source location analysis indicated, that despite lower activity in SC, we observed some clustering of the events. In contrast, in AAM, the activity inside the specimen is randomly distributed over the whole volume. The monitoring results help to estimate the material’s sealing properties which are crucial to assess their applicability as sealing material for engineered barriers.
Hydrogen-enriched natural gas, H2NG is a mixture of natural gas and H2 that can be used on existing natural gas infrastructure with little or even no modification to be applied H2NG is thus an option in the transition from fossil fuels to a hydrogen economy, as it can reduce greenhouse gas emissions and can accelerate the adoption of H2 from renewable sources. Theoretically, H2 can be mixed with NG in any ratio, but H2NG mixtures with up to 20 vol-% of H2 represent the most realistic near term option due to technical and economic reasons. The addition of H2 to natural gas alters the thermodynamic properties of the mixture, which affects its transport, storage, and combustion characteristics. In this work, we present experimental density measurements for different H2NG mixtures, performed with a high-precision single sinker densimeter from 250 to 350 K and up to 20 MPa. The mixtures were prepared gravimetrically according to ISO 6142-1 for maximum precision in their composition.
An overview with the basics of size and shape measurement of particles and 2D structures according to established methodologies (and popular imaging processing software packages) with imaging techniques is given. Main descriptors are explained based on practical cases are determined interactively at the flipchart.
Traceable morphological and chemical characterization of nanomaterials with respect to the various possible sizes, size distributions, shapes, and concentrations of real-world nanoparticles (NPs) is a challenging task. Particularly for the nonspherical, non-monodisperse nanoparticles – as typically for most of the commercial particles, including their strong tendency to agglomerate, there is a lack of standard operation procedures providing accurate nanoparticle characterisation.
In the framework of the pre-standardisation framework of VAMAS (Versailles Project on Advanced Materials and Standards, www.vamas.org) two interlaboratory comparison (ILC) studies are being carried out under the Technical Working Area (TWA) 34 “Nanoparticle Populations”:i) Project #15 addresses the analysis of the size and shape distribution of TiO2 bipyramidal NPs by traceable imaging methods such as TEM, SEM, STEM-in-SEM, AFM as well as with SAXS as an ensemble method. This ILC is thought as the next level development of the case studies exemplified in the published ISO standards ISO 21363 and ISO 19749. It was agreed to complete the first ILC with the NPs already prepared according to the same procedure on a TEM grid, and, at a later stage, to carry out second ILCs with the same NPs distributed to the participants as liquid suspensions together with protocols for the uniform NP deposition on suited substrates - as developed and optimized within the European project nPSize. Once having good deposition protocols available, the door for automated image analysis gets opened. Corresponding image analysis protocols and reporting templates have been distributed to the ILC participants, too.
ii) Project #16: two spherical SiO2 NP samples with bi-modal size distributions in two nominal relative number concentrations were prepared and distributed also as liquid suspensions accompanied by sample preparation, measurement, and image analysis protocols and reporting templates. Here, the NP concentration is the primary parameter to be measured. For the imaging methods it is targeted to
measure the relative nanoparticle concentrations (relative populations of the two modes).
The results of all the participating laboratories, in both ILCs, compiled in comparative representations will be shown and discussed for the first time. The reduction of the measurement uncertainties associated to the size, shape and number-concentration results induced by the significant improvement of the sample preparation on substrates (as single particles with a high-density coverage), combined with welldefined image analysis procedures will be highlighted.
Porous films play an important role particularly in energy applications like photovoltaics, electrolysis or batteries. Thin film properties such as thickness, chemical composition, crystallinity of the framework, and porosity define the activity of the porous films. The accurate morpho-chemical characterisation of mesoporous thin films is a challenging analytical task which requires the consideration of new analytical approaches based on the combination of data of different methods able to address the structure and chemical composition at the nanoscale. In this contribution we characterise thin mesoporous iridium-titanium mixed oxide film properties by Electron Probe Microanalysis (EPMA) with Energy-Dispersive X-ray Spectroscopy (EDS) at an SEM applied in a dedicated “thin film analysis” approach. Thus, the film mass deposition, film thickness and the film density can be determined. Further, by dividing the measured film density to an assumed (theoretical) metal oxide framework (skeletal) density, the thin film porosity can be extracted, too.
In order to assess the homogeneity of the thin film properties like the chemical composition, Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS) and Auger Electron Spectrometry are applied in the depth profiling mode, so that possible in-depth gradients are detected. Lateral inhomogeneities in the chemical composition and structure of the thin mesoporous films are also identified by applying the same methods in the line-scan or mapping mode, which can be further combined with in-depth sputtering for 3D information. The role of the spatial resolution of the analytical methods considered, which can go down well below 100 nm, will be highlighted.
Following parts of the research project as proceeded at University of Birminngham are presented: Translocation, Experiments, Synthesis of DNA Structures, Antibody, Biomarker, Binding. Following works have been carried out at BAM: High Resolution Electron Microscopy, Dedicated Sample Preparation, Surface Analysis Methods.
Electron microscopy applied in different operating modes, e.g., SEM, TEM or STEM-in-SEM, is the gold standard method to investigate the exact size and shape of individual nanoparticles. However, when fine nanoparticles with a non-monodisperse size distribution and non-spherical shapes are analysed, achieving an accurate result is challenging. Deviations in size measurements of more than 10% may occur. Understanding of the contrasts and sensitivities characteristic to the individual operating modes of an electron microscope is key in interpreting and evaluating quantitatively the measurement uncertainties needed for an eventual certification of specific nanoparticles via traceable results. Further, beyond the pure measurement, the other components in the analysis workflow with significant impact on the overall measurement uncertainties are the sample preparation and the image segmentation. In the present study the same areas of selected iron oxide fine nanoparticles (<25 nm) as reference nanomaterial (candidate) prepared on substrate for electron microscopy imaging are analysed correlatively with SEM, STEM-in-SEM and TEM with respect to their size and shape distribution. Individual significant measurement uncertainties are discussed, e.g., the sensitivity of secondary electron detectors of InLens-type to the surface morphology, particularly to the presence of an ultrathin organic coating or signal saturation effects on the particle edges, to electron beam exposure, to surface contamination, or the selection of the threshold for image segmentation. Another goal of this study is to establish a basis of analysis conditions which shall guarantee accurate results when both manual and particularly (semi-)automated segmentation approaches are applied. Advantages as well as limitations of the use of different electron microscopy operating modes, applied individually and correlatively, are highlighted.
The EU member states have set out ambitious long-term goals for deploying offshore wind energy. The installed offshore wind capacity is set to increase from 14.6 GW in 2021 to around 320 GW in 2050. This signifies the role of offshore wind energy as a major contributor to reaching the EU’s climate and energy goals. To ensure that the defined targets are met, a significant number of new wind farms has to be installed and existing wind farms reaching the end of their planned life need to be reused efficiently. Some of the relevant reuse alternatives are lifetime extension, repowering based on the existing support structures and repowering with new turbines.
As a basis of the decision-making regarding the reuse of existing offshore wind farm, the expected utility of each relevant option should be determined based on the associated expected rewards, costs and risks. The optimal concept maximizes the utility of the decision-maker and fulfills the existing constraints and requirements. To facilitate such a quantitative decision-making, models and methods have to be developed. In particular, models are required that enable predictions of (a) the condition and performance of the turbines and support structures and (b) the renumeration, costs and consequences of adverse events. These predictions have to consider (a) the governing uncertainties, (b) the available information from the planning, construction, installation and operating phase, (b) potential repair, retrofitting and strengthening schemes and (c) possible monitoring, inspection and maintenance regimes for the future operating phase.
Over the past years, several models, methods and tools have been developed at the Bundesanstalt für Materialforschung und -prüfung (BAM) to support the structural integrity management of offshore wind turbine substructures. These include:
(a) a prototype for reliability-based, system-wide, adaptive planning of inspections of welded steel structures in offshore wind farms,
(b) a method for monitoring and risk-informed optimization of inspection and maintenance strategies for jacket structures subject to fatigue, and
(c) a probabilistic cost model of inspection and maintenance of welded steel structures in offshore wind farms.
This contribution provides an overview on these works and discusses how they can be adapted and extended to support the decision-making regarding lifetime extensions and repowering of offshore wind farms.
Modern high-pressure H2 tanks consist of fiber-reinforced composite materials and a plastic lining on the inside. The use of glass would drastically increase the H2 barrier effect. This could be achieved with glass liners or fiber-reinforced polymer-bonded glass capillary storage tanks and would enable lower wall thicknesses, higher gravimetric storage densities and variable designs and thus a much more effective use of space.
However, the decisive material parameters for the development of these technologies, such as the hydrogen permeation, are unknown. This study focuses on H2 diffusion in glasses of different chemical compositions.
H2 permeation is measured by mass spectrometry. For this purpose, the mass spectrometer (MS), which is located in a high vacuum, is separated from the pressure side by the test specimen. Pure H2 gas is present on the pressure side, so that the mass flow is recorded qualitatively and quantitatively in the MS. The permeation coefficients are calculated from the sample geometry and the mass flow rates. The very low H2 permeation of glass is measured on bundles of thin-walled commercially available glass capillaries and compared with the hydrogen permeation data of the glass powder method.
AbstractLithium‐ion batteries, essential for electronics and electric vehicles, predominantly use cathodes made from critical materials like cobalt. Sulfur‐based cathodes, offering a high theoretical capacity of 1675 mAh g−1 and environmental advantages due to sulfur's abundance and lower toxicity, present a more sustainable alternative. However, state‐of‐the‐art sulfur‐based electrodes do not reach the theoretical capacities, mainly because conventional electrode production relies on mixing of components into weakly coordinated slurries. Consequently, sulfur‘s mobility leads to battery degradation—an effect known as the “sulfur‐shuttle”. This study introduces a solution by developing a microporous, covalently‐bonded, imine‐based polymer network grown in situ around sulfur particles on the current collector. The polymer network (i) enables selective transport of electrolyte and Li‐ions through pores of defined size, and (ii) acts as a robust host to retain the active component of the electrode (sulfur species). The resulting cathode has superior rate performance from 0.1 C (1360 mAh g−1) to 3 C (807 mAh g−1). Demonstrating a high‐performance, sustainable sulfur cathode produced via a simple one‐pot process, our research underlines the potential of microporous polymers in addressing sulfur diffusion issues, paving the way for sulfur electrodes as viable alternatives to traditional metal‐based cathodes.
Non-Destructive Testing (NDT) of type 4 composite pressure vessels can be seen as key to better understanding the behaviour of the composite structure and the impact of the manufacturing process on its quality. In this presentation, NDT methods used in the “Trustworthy Hydrogen” project are introduced. A brief discussion of the observed phenomena is provided.
The research carried out at the Laboratory of Spectroscopy of Functional Materials at IFSC/USP, in Brazil, is focused on the synthesis and structural-property correlation of luminescent materials including rare-earth (RE) doped glasses, ceramics and hybrid host-guest materials. For the past five years, we have been particularly interested in the development of single- and multifunctional nanosystems based on core-shell upconversion nanoparticles (UCNP) associated with dyes, organometallic complexes and other organic molecules, for biophotonic and sensing applications. In these systems, we take advantage of energy transfer between the UCNPs and the molecules to either supress or enhance luminescent response. Examples include the possibility of bioimaging and photodynamic therapy of bacteria and cancer cells, simultaneous magnetothermia and thermometry, localized O2 sensing, fast detection and quantification of biological markers (e.g. kidney disease) and microorganisms. On what concerns the development of luminescent sensors - a recently started project, our aim is to develop paper-based platforms for point-of-care devices. In this presentation, an overview of our contributions for the past years and our future aims will be presented with several examples.
Vorstellung OWA VERBATIM
(2024)
Das Risiko von Pfahlfussbeulen ist ein wesentlicher Grund für hohe Pfahlwandstärken bei Monopiles. Das Projekt VERBATIM - Verifikation des Beulnachweises und –verhaltens großer Monopiles zielte darauf ab, Beulphänomene zu untersuchen, die sich sowohl auf die plastischen Verformungen der Pfahlspitze während der Installation als auch auf das Beulen des eingebetteten Pfahls in der Nähe des Seebodens beziehen.
Auf der Basis aufwändiger Versuche wurden numerische Modelle entwickelt und validiert. Dies ermöglicht ein besseres Verständnis des Beulverhaltens, um die Wanddicke zu reduzieren, was Kosteneinsparungen bei der Stahlmenge sowie die Entwicklung sicherer und optimierter Strukturen erlaubt. Die bisherigen Designverfahren konnten die erfolgreiche Installation der Monopiles gewährleisten. Da die Größe von Monopiles jedoch stetig zunimmt, wird die Entwicklung verbesserter Designverfahren für sichere und kostengünstige Fundamente immer wichtiger.
Der Rückenwind-Vortrag gibt eine Übersicht zu den durchgeführten Untersuchungen und Ergebnissen
Distributed fiber optic sensing (DFOS) technique is a promising and robust non-destructive testing tool that can seamlessly acquire environmental conditions over large scales. Therefore, it has found extensive applications in structural health monitoring. Its appeal for monitoring underground facilities lies in the intrinsic properties of the optical fiber, such as immunity to magnetic interference, small size, chemical inertia, etc. This paper provides a concise overview of DFOS applications in underground facility monitoring. Following a brief introduction to the workingbnprinciple of the DFOS technique, various examples are provided to demonstrate how distributed fiber sensors contribute to monitoring underground facilities. The paper presents unpublished field test results with an emphasis in the energy sector, including monitoring gas storage facilities, geothermal reservoir exploration, and ground movement detection. Furthermore, the paper identifies several directions for enhancing the DFOS system.
The risk of pile base buckling is a major reason for high pile wall thicknesses in monopiles. The VERBATIM project - Verification of the buckling detection and behaviour of large monopiles - aimed to investigate buckling phenomena related to both the plastic deformation of the pile tip during installation and the buckling of the embedded pile near the seabed.
Numerical models were developed and validated on the basis of extensive tests. This enables a better understanding of the buckling behaviour in order to reduce the wall thickness, which allows cost savings in the amount of steel and the development of safer and optimised structures. The previous design procedures were able to ensure the successful installation of the monopiles. However, as the size of monopiles continues to increase, the development of improved design methods for safe and cost-effective foundations is becoming increasingly important.
The presentation provides an overview of the investigations carried out and the results.
Recent publications indicate that the order of electrochemical anodization (before or after the laser-processing step) plays an important role for the response of boneforming osteoblasts – an effect that can be utilized for improving permanent dental- or removable bone-implants. For exploring these different surface functionalities, multi-method chemical and structural characterizations were performed for two different characteristic micro-spikes covered by nanometric laserinduced periodic surface structures (LIPSS) on Ti-6Al-4V upon irradiation with nearinfrared ps-laser pulses (1030 nm wavelength, ~1 ps pulse duration, 66 & 80 kHz pulse repetition rate) at two distinct sets of laser fluence and beam scanning parameters. This involves morphological and topographical investigations by scanning electron microscopy (SEM) and white light interference microscopy (WLIM), near-surface chemical analysis by X-ray photoelectron spectroscopy (XPS) and hard X-ray photoelectron spectroscopy (HAXPES), as well as structural material examination via X-ray diffraction (XRD) measurements. The results allow to qualify the laser ablation depth, assess the spike geometry and surface roughness parameters, and provide detailed insights into the near-surface oxidation that may cause the different cell growth behavior for pre- or post-anodized medical implants.
Hydrogen Fire Testing
(2024)
In this presentation we present a new hydrogen-based test rig for an ongoing feasibility study of using hydrogen as an energy source for the thermal testing of transport packages containing radioactive materials. The test rig will be capable of combusting hydrogen for a wide range of different burner geometries, mass flows and if necessary hydrogen blends. As this type of fire test according to the IAEA boundary conditions does not yet exist, a large number of preliminary investigations, safety assessments and calculations must be carried out in order to develop a viable concept for hydrogen fires. In the first step of the feasibility study, the temperature, structure, and radiation of various hydrogen flames are surveyed. In future works, the results will make it possible to design burner frames that are suitable for fire reference tests in order to make comparisons with pool and propane fires used in assessment procedures today. In parallel comparative numerical simulations are conducted to model the thermal behaviour of hydrogen flames using the software package Ansys®. On the one hand, the numerical simulations support the experiments by providing an overview of numerous parameters and the measuring range; on the other hand, they will help with the design of the burner frame in future work. This paper gives an overview in the design and capabilities of the test rig. Furthermore, the results of the parameter studies show that burner geometry and mass flow provide a significant design margin for the thermal shape of the hydrogen flames. In addition, the results of the initial numerical calculations will be used to determine the necessary sensors, the positions, and their operating range. Only the optimal interaction allows a controlled system that permits user-defined hydrogen fires.
Introduction and Necessity of the Investigation
The IAEA regulations for the safe transport of radioactive material (IAEA SSR-6) define the safety requirements for different package types and consider different transport conditions. The accident conditions of transport specify different mechanical and thermal tests based on investigations of real accident scenarios.
Considering the rapid development of new boundary conditions of transport such as electric mobility and the use of hydrogen as energy source for trucks and other kind of vehicles, potential effects of battery and hydrogen fires in transport accidents should be investigated. The aim is to evaluate the existing test requirements developed and derived decades ago, whether they are covering the current transport situation.
This concept paper will briefly present the reasons for detailed investigations as bases for a coordinated research project under the roof of the IAEA.
Hydrogen will be one of the most important energy carriers of tomorrow. For the necessary large-scale and long-distance transportation, a reliable pipeline infrastructure is required. It is meanwhile in the most countries accepted to follow a two-way strategy by (I) repurposing the existing natural gas (NG) grid combined with (II) the installation of new pipelines. For example, in Europe a so-called European Hydrogen Backbone (EHB) is planned for 2040. Currently, 28 countries work together to establish a hydrogen pipeline grid of several thousands of kilometers. In that connection, a wide number of materials are used with different thicknesses, strength levels, chemical composition, surface conditions and so on. Worldwide research projects suggest the general compatibility of the currently applied pipeline steels e.g., in Germany the “SysWestH2” project. Nonetheless, the hydrogen gas grid will require regular inspections, repair, and maintenance. In addition, sometimes pipeline tees are required to connect new grids or pipelines the existing infrastructure. From that point of view, existing concepts from NG-grids must be investigated in terms of the transferability to hydrogen service. An overview on occurring challenges for this hydrogen transition, especially for in-service weld repair procedures is given in this presentation.
Brittle Failure Limits of Spent Fuel Claddings Subjected to Long-Term Dry Interim Storage Conditions
(2024)
The mechanical properties of spent fuel claddings can be adversely affected under the conditions of long-term dry interim storage, so that the failure limits may be reached in case of mechanical loads during handling or transport after storage. Pre-storage drying and the early stage of interim storage can expose the cladding to higher temperatures and higher tensile hoop stresses than those associated with in-reactor operation and pool storage. During slow cooling of a cladding tube under internal pressure, radial hydrides may precipitate in zirconium-based cladding alloys. This can lead to embrittlement of the material and sudden failure of the cladding integrity under mechanical stress. In order to prevent brittle failure, numerical methods are being developed to predict the mechanical behaviour and identify limiting conditions. Experimental investigations, numerical analyses and evaluation methods are discussed.
An established experimental method for characterising cladding materials is the Ring Compression Test (RCT). Some test results on irradiated cladding tubes after operation in pressure water reactors are publicly available. However, it is helpful to carry out studies on unirradiated surrogate claddings with similar material properties to reduce the effort associated with irradiated samples in hot cells and to perform material tests with a wider range of parameters. On the basis of such experimental data, load-displacement curves have been numerically analysed for a selection of cladding materials.
Radial hydrides can cause a sample to break suddenly due to fracture even at low deformation. Noticeable load drops in the RCT are caused by unstable crack propagation through the radial hydride network. The failure mechanism is quasi-cleavage in the hydrides and micro-void nucleation, growth, and coalescence in the zirconium matrix, with ductile tearing patches connecting adjacent hydrides. The cohesive zone approach was used to simulate the failure process taking into account the radial hydride morphology.
The developed method can adequately describe both the deformation and failure behaviour of irradiated as well as unirradiated claddings of zirconium-based alloys with radial hydrides under RCT conditions. Limiting conditions can be expressed in terms of fracture energy and cohesive strength.
The aim of the ZIKA research project, funded by the BMBF funding program FORKA (FKZ:15S9446 A-C), is the automated detection of internal corrosion of radioactive drums using non-destructive testing (NDT). The newly gained findings will be combined with research results from the previous project EMOS (FKZ:15S9420), which dealt with the external damage of drums. Using NDT, internal corrosion and possible internal sources of damage can be identified before they become a safety-relevant issue. However, if internally sourced damages can be seen externally, the integrity of the damaged drum is no longer guaranteed, which has significant consequences. Therefore, early detection before integrity failure is of particular importance for interim storage facilities with low- and medium-level radioactive waste drums.
Brittle Failure Limits of Spent Fuel Claddings Subjected to Long-Term Dry Interim Storage Conditions
(2024)
The mechanical properties of spent fuel claddings can be adversely affected under the conditions of long-term dry interim storage, so that the failure limits may be reached in case of mechanical loads during handling or transport after storage. Pre-storage drying and the early stage of interim storage can expose the cladding to higher temperatures and higher tensile hoop stresses than those associated with in-reactor operation and pool storage. During slow cooling of a cladding tube under internal pressure, radial hydrides may precipitate in zirconium-based cladding alloys. This can lead to embrittlement of the material and sudden failure of the cladding integrity under mechanical stress. In order to prevent brittle failure, numerical methods are being developed to predict the mechanical behaviour and identify limiting conditions. Experimental investigations, numerical analyses and evaluation methods are discussed.
An established experimental method for characterising cladding materials is the Ring Compression Test (RCT). Some test results on irradiated cladding tubes after operation in pressure water reactors are publicly available. However, it is helpful to carry out studies on unirradiated surrogate claddings with similar material properties to reduce the effort associated with irradiated samples in hot cells and to perform material tests with a wider range of parameters. On the basis of such experimental data, load-displacement curves have been numerically analysed for a selection of cladding materials.
Radial hydrides can cause a sample to break suddenly due to fracture even at low deformation. Noticeable load drops in the RCT are caused by unstable crack propagation through the radial hydride network. The failure mechanism is quasi-cleavage in the hydrides and micro-void nucleation, growth, and coalescence in the zirconium matrix, with ductile tearing patches connecting adjacent hydrides. The cohesive zone approach was used to simulate the failure process taking into account the radial hydride morphology.
The developed method can adequately describe both the deformation and failure behaviour of irradiated as well as unirradiated claddings of zirconium-based alloys with radial hydrides under RCT conditions. Limiting conditions can be expressed in terms of fracture energy and cohesive strength.
Distributed fiber optic strain sensing for structural health monitoring of 70 MPa hydrogen vessels
(2024)
We report on the development and testing of 70 MPa hydrogen pressure
vessels with integrated fiber optic sensing fibers for automotive use. The paper deals with the condition monitoring of such composite pressure vessels (CPVs) using the optical backscatter reflectometry (OBR) applied for a distributed fiber optic strain sensing along fully integrated polyimide-coated single-mode glass optical fiber (SM-GOF). The sensing fibers were embedded into the vessel structure by wrapping them over the polymer liner during the manufacturing process of the carbon fiber reinforced polymer (CFRP). Detecting local strain events by the integrated fiber optic sensors can be an opportunity for monitoring the material degradation of CPVs under static and cyclic loading.
Low Transformation Temperature (LTT)-Schweißzusätze sind ein innovativer Ansatz, um Eigenspannungen in Schweißnähten zu reduzieren. Dieser Vortrag behandelt neben den Einfluss der LTT-Schweißzusätze auch deren Naht-Ausführungen. Die unterschiedlichen LTT-Nahtgeometrien haben einen signifikanten Einfluss auf den Eigenspannungsabbau in der Schweißnaht und der Wärmeeinflusszone (WEZ).
Distributed fiber optic strain sensing for structural health monitoring of 70 MPa hydrogen vessels
(2024)
We report on the development and testing of 70 MPa hydrogen pressure vessels with integrated fiber optic sensing fibers for automotive use. The paper deals with the condition monitoring of such composite pressure vessels (CPVs) using the optical backscatter reflectometry (OBR) applied for a distributed fiber optic strain sensing along fully integrated polyimide-coated single-mode glass optical fiber (SM-GOF). The sensing fibers were embedded into the vessel structure by wrapping them over the polymer liner during the manufacturing process of the carbon fiber reinforced polymer (CFRP). Detecting local strain events by the integrated fiber optic sensors can be an opportunity for monitoring the material degradation of CPVs under static and cyclic loading.
Hydrogen pressure vessels are among the most essential components for reliable hydrogen technology. Under current regulations, a mostly conservative strategy is employed, restricting the usage time of hydrogen pressure vessels without providing information on the real remaining lifetime. During the service life, pressure vessels are inspected periodically. However, no established method that can provide continuous monitoring or information on the remaining safe service life of the vessel. In this paper, we propose a sensor network for Structural Health Monitoring (SHM) of hydrogen pressure vessels where data from all sensors are collected and centrally evaluated. Specifically, we integrate three different SHM sensing technologies namely Guided Wave ultrasonics (GW), Acoustic Emission testing (AT), and distributed Fiber Optic Sensing (FOS). This integrated approach offers significantly more information and could therefore enable a transition from costly and time-consuming periodic inspections to more efficient and modern predictive maintenance strategies, including Artificial Intelligence (AI)-based evaluation. This does not only have a positive effect on the operational costs but enhances safety through early identification of critical conditions in the overall system in real-time. We demonstrate an experimental set-up of a lifetime test where a Type IV Composite Overwrapped Pressure Vessel (COPV) is investigated under cyclic loading instrumented with AT, FOS, and GW methods. We acquired data from the sensor network until the pressure vessel failed due to material degradation. The data collected using the three different SHM sensor technologies is planned to be evaluated individually, using data fusion, and AI. In the future, we aim to integrate the measurement setup into a hydrogen refueling station with the data stream implemented into a digital signal processing chain and a digital twin.
The transition toward a hydrogen-based economy requires a widespread transport and distribution network, and repurposed natural gas pipelines are a viable option. An assessment of the hydrogen-induced degradation of pipeline steels is needed to inject H2 gas into the existing infrastructure safely. The conservative and standardized method consists of in-situ tensile tests in an autoclave filled with high-pressure hydrogen gas. A proposed alternative method involves
using a hollow specimen as containment volume and applying the gas pressure in the inner cavity.
This technique has lower costs and shorter test preparation time but is not standardized yet. This study aims to evaluate and compare the tensile properties of API 5L X65 pipeline steel in two states: vintage and modern. The influence of the surface roughness is investigated through parallel tests with drilled and reamed specimens. Hydrogen tests are compared with reference tests in an inert environment. A significant hydrogen-induced decrease in tensile properties is observed, and no significant difference between vintage and modern X65 can be drawn. The reduction in tensile properties is more significant in specimens with higher inner surface roughness. The evaluation of surface conditions appears crucial when assessing the HE susceptibility of hydrogen transport and storage equipment.
Low transformation temperature (LTT) welding consumables offer an innovative approach to increase the fatigue strength of welded high-strength steel structures. LTT welding consumables are characterized by a martensitic phase transformation near ambient temperature, which generates compressive residual stresses in the weld and heat affected zone (HAZ). The aim is to achieve a weld geometry, which generate high compressive residual stresses at the fatigue crack critical weld toe.
Longitudinal stiffeners were gas metal arc welded using a conventional welding consumable; the base material was a high strength steel S700M. A chromium-nickel alloyed LTT consumable was deposit subsequently just on front sides of the stiffeners. Different welding parameters led to varying cross sections of the weld. The residual stresses were determined using X-ray diffraction (XRD) in the crack critical HAZ.
When using only the conventional, the HAZ is characterized by high tensile residual stresses. The additional application of the LTT alloy leads to a significant reduction of the tensile residual stresses. Depending on the weld geometry, even compressive residual stresses can be observed at the weld toe
The presentation is divided in two parts. In the first part the significance of mechanical impacts as ignition source for hydrogen containing atmospheres is shown and recent results of a research project evaluating ignition probabilities under different conditions is presented. In the second part future challenges in the field of hydrogen safety are discussed. Finally, the German National Hydrogen Safety Alliance is introduced.
Hydrogen pressure vessels are among the most essential components for reliable hydrogen technology. Under current regulations, a mostly conservative strategy is employed, restricting the usage time of hydrogen pressure vessels without providing information on the real remaining lifetime. During the service life, pressure vessels are inspected periodically. However, no established method that can provide continuous monitoring or information on the remaining safe service life of the vessel. In this paper, we propose a sensor network for Structural Health Monitoring (SHM) of hydrogen pressure vessels where data from all sensors are collected and centrally evaluated. Specifically, we integrate three different SHM sensing technologies namely Guided Wave ultrasonics (GW), Acoustic Emission testing (AT), and distributed Fiber Optic Sensing (FOS). This integrated approach offers significantly more information and could therefore enable a transition from costly and time-consuming periodic inspections to more efficient and modern predictive maintenance strategies, including Artificial Intelligence (AI)-based evaluation. This does not only have a positive effect on the operational costs but enhances safety through early identification of critical conditions in the overall system in real-time. We demonstrate an experimental set-up of a lifetime test where a Type IV Composite Overwrapped Pressure Vessel (COPV) is investigated under cyclic loading instrumented with AT, FOS, and GW methods. We acquired data from the sensor network until the pressure vessel failed due to material degradation. The data collected using the three different SHM sensor technologies is planned to be evaluated individually, using data fusion, and AI. In the future, we aim to integrate the measurement setup into a hydrogen refueling station with the data stream implemented into a digital signal processing chain and a digital twin.
Packages for the transport of spent nuclear fuel are designed to endure severe accidents. To obtain approval, these transport packages must adhere to the specification-based criteria of the international transport regulations SSR-6 of the International Atomic Energy Agency (IAEA). To ensure compliance with these requirements, specific mechanical and thermal tests need to be addressed with respect to the package type. Typically, SSR-6 prescribes a mechanical test followed by a thermal fire test as part of different testing scenarios. To approve the latter test of the sequence, BAM performs calorimeter tests in advance with so-called fire reference packages for characterizing the actual fire and its impact on the package to be tested. Packages are designed with different geometry sizes depending on their purpose. For previous tests, the implemented test setups in the fire test stand were sufficiently dimensioned and could cover all requirements in this respect. However, to cover additional testing needs in the future, BAM is expanding the test setup for the purpose of testing significantly larger packages.
In previous test setups one ring burner for propane surrounding the test specimen was sufficient. The limiting size in this configuration was the design height of the transport package to be tested. According to the thermal test of the IAEA-Regulations [1], a 30-minute fully engulfing 800°C pool fire or an equally severe fire, e.g., propane gas fire, must be applied to the transport package. Possible adjustments such as nozzle cross-section and propane mass flow can be adjusted to a certain extent. Further modifications, to cover significantly higher and larger packages all-around with a fully engulfing fire, must be accomplished with an additional, second burner ring. Both burner rings had the same dimensions and were mounted on top of each other at different heights to create a significantly larger volume of fire that completely engulfs the package including its impact limiter.
To meet the IAEA regulatory boundary conditions, the enhanced fire test stand with the second burner ring is tested with a large fire reference package and will then be used for real-size transport packages after all parameters are successfully met. This fire reference package represents the external geometry of a generic transport cask for radioactive material and is equipped with numerous temperature sensors to record temperature curves at the interior wall surfaces.
Structural health monitoring of hydrogen pressure vessels using distributed fiber optic sensing
(2024)
We report on distributed fiber optic sensing-based monitoring of hydrogen composite overwrapped pressure vessels (COPV) to simultaneously increase the operational lifespan and mitigate maintenance costs. Our approach represents, to the best of our knowledge, the first application of distributed fiber optic sensing for COPV Type IV monitoring, where the sensing fibers are attached to the surface, rather than integrated into the composite material. Specifically, we attach an optical fiber of 50 m to the pressure vessel's surface, covering both the cylindrical and dome sections. We note that our fiber optic sensing technique relies on swept wavelength interferometry providing strain information along the entire length of the optical fiber with high spatial resolution even at the millimeter scale. When the vessel is pressurized, the sensing optical fiber shows a linear strain response to pressure at every position along the fiber. After thousands of load cycles, the vessel finally fails with the optical fiber detecting and precisely localizing the damage in the vessel’s blind dome area. Furthermore, we discuss the potential of state-of-the-art signal processing methods and machine learning for advancing predictive maintenance. This could reduce the number of regular inspections, mitigate premature maintenance costs, and simultaneously increase the vessel’s remaining safe service life. We believe that the structural health monitoring of hydrogen pressure vessels with fiber optic sensors can enhance trust in hydrogen technology contributing to the energy transition in the future.
Packages for the transport of spent nuclear fuel are designed to endure severe accidents. To obtain approval, these transport packages must adhere to the specification-based criteria of the international transport regulations SSR-6 of the International Atomic Energy Agency (IAEA). To ensure compliance with these requirements, specific mechanical and thermal tests need to be addressed with respect to the package type. Typically, SSR-6 prescribes a mechanical test followed by a thermal fire test as part of different testing scenarios. To approve the latter test of the sequence, BAM performs calorimeter tests in advance with so-called fire reference packages for characterizing the actual fire and its impact on the package to be tested. Packages are designed with different geometry sizes depending on their purpose. For previous tests, the implemented test setups in the fire test stand were sufficiently dimensioned and could cover all requirements in this respect. However, to cover additional testing needs in the future, BAM is expanding the test setup for the purpose of testing significantly larger packages.
In previous test setups one ring burner for propane surrounding the test specimen was sufficient. The limiting size in this configuration was the design height of the transport package to be tested. According to the thermal test of the IAEA-Regulations [1], a 30-minute fully engulfing 800°C pool fire or an equally severe fire, e.g., propane gas fire, must be applied to the transport package. Possible adjustments such as nozzle cross-section and propane mass flow can be adjusted to a certain extent. Further modifications, to cover significantly higher and larger packages all-around with a fully engulfing fire, must be accomplished with an additional, second burner ring. Both burner rings had the same dimensions and were mounted on top of each other at different heights to create a significantly larger volume of fire that completely engulfs the package including its impact limiter.
To meet the IAEA regulatory boundary conditions, the enhanced fire test stand with the second burner ring is tested with a large fire reference package and will then be used for real-size transport packages after all parameters are successfully met. This fire reference package represents the external geometry of a generic transport cask for radioactive material and is equipped with numerous temperature sensors to record temperature curves at the interior wall surfaces.
We investigated the phase transformations during butt-welding of supermartensitic steel plates with help of Neutron-Bragg-Edge Imaging (NBEI). Gas tungsten arc welding (GTAW) was used with a motorized torch allowing for automated weldments. The austenitization in the heat affected zone (HAZ) could be clearly visualized at λ = 0.39 nm, a wavelength smaller than the Bragg edge wavelengths of both austenite and martensite. The re-transformation into the martensitic phase during cooling was clearly detected. However, we observed an unexpected additional change in transmission at λ = 0.44 nm, a wavelength larger than the wavelength of the Bragg edges of both the martensitic and austenitic phases. We attribute this change to the Deybe-Waller-Factor that describes the temperature dependence of coherent scattering at a crystal lattice. The observed two-dimensional attenuation map corresponds well with a temperature distribution modelling by software macros in ANSYS [3]. Here, the absolute temperature values could be achieved by calibrating the modelled attenuation with help of a thermocouple placed at the steel plate. This allows in return for a direct two-dimensional temperature reading based on the Debye-Waller-relation between neutron attenuation and sample temperature.
eavy-weight packages for the safe transport of radioactive material are equippedwith impact limiters often built ofwood-filled steel sheet structures to fulfil the requirements of the International Atomic Energy Agency (IAEA) regulations. The requirements definemechanical tests followed by a thermal test, including criteria ensuring the package design’s ability to withstand severe accidents and provide a high level of technical safety. Impact limiters are a package component mainly designed for the packages to withstand severe mechanical accident scenarios. In drop tests the impact limiters absorb the kinetic energy during impact of the package. The package must then - with its pre-damaged impact limiters - endure a thermal test defined precisely in the IAEA regulations as a 30-min fully engulfing 800 °C-fire. After the fire, a wood-filled impact limiter may continue to release thermal energy from an ongoing combustion process, defining relevant package temperatures. The energy flow from a possible burning impact limiter to the package is important for the safety evaluation of transport packages. To investigate the combustion behaviour of densely packed layers of spruce wood, encapsulated in pre-damaged cylindrical metal enclosures, a test set-up has been realised. The set-up consists of a combustion chamber to perform these tests under defined boundary conditions. The temperature development of the test specimens will be observed fromoutside with a thermographic imager, with HD-Cameras, and the mass loss will be measured during the entire test. Airflow conditions in the combustion chamber are analysed using Computational Fluid Dynamics (CFD) calculations in OpenFOAM. The planned combustion test setup is described.
Aspects of corrosion protection in the maritime sector– Focus of Current research of BAM for H2Mare
(2024)
Germany has set itself the task of becoming a world leader in the field of green hydrogen technologies and is promoting the transition to a hydrogen economy. The H2Mare flagship project is exploring the offshore production of green hydrogen and other power-to-X products. One of the most important goals is the safe and cost-efficient operation of offshore infrastructures, where a service life of at least 25 years is aimed at. However, the corrosive environment towards metallic materials presents challenges in marine areas. The atmosphere at one location could be affected by the distance to the sea level and does not have the same corrosivity for all exposed kinds of materials. The research of the durabilitty of different materials and corrosion protection systems by weathering campaigns and laboratory experiments aims to close this gap of knowledge. BAM‘s mandate is to make the data available to the responsible operators through standardisation to ensure safety and cost efficiency.
Heavy-weight packages for the safe transport of radioactive material are equippedwith impact limiters often built ofwood-filled steel sheet structures to fulfil the requirements of the International Atomic Energy Agency (IAEA) regulations. The requirements definemechanical tests followed by a thermal test, including criteria ensuring the package design’s ability to withstand severe accidents and provide a high level of technical safety.
Impact limiters are a package component mainly designed for the packages to withstand severe mechanical accident scenarios. In drop tests the impact limiters absorb the kinetic energy during impact of the package. The package must then - with its pre-damaged impact limiters - endure a thermal test defined precisely in the IAEA regulations as a 30-min fully engulfing 800 °C-fire. After the fire, a wood-filled impact limiter may continue to release thermal energy from an ongoing combustion process, defining relevant package temperatures. The energy flow from a possible burning impact limiter to the package is important for the safety evaluation of transport packages. To investigate the combustion behaviour of densely packed layers of spruce wood, encapsulated in pre-damaged cylindrical metal enclosures, a test set-up has been realised. The set-up consists of a combustion chamber to perform these tests under defined boundary conditions. The temperature development of the test specimens will be observed fromoutside with a thermographic imager, with HD-Cameras, and the mass loss will be measured during the entire test. Airflow conditions in the combustion chamber are analysed using Computational Fluid Dynamics (CFD) calculations in OpenFOAM. The planned combustion test setup is described.
A monitoring and surveillance system is a mandatory element to ensure that a radioactive waste disposal facility provides and meets the required level of safety during both its operational and closure periods. In this study an innovative approach for the identification and monitoring of the structural integrity of stored radioactive drums is presented. The activities were carried out in the context of the European Project PREDIS, whose goal is the development of a robust and reliable sensing technology for monitoring and long-term storage of radioactive waste packaging systems.
Specifically, the focus was set on the development of innovative and smart sensor technologies, non-destructive examination tools, and/or devices capable to improve the safety of the storage by minimizing the number of interventions of cemented waste packages. Both conventional and innovative techniques, such as muon-tomography, SiLiF neutron and SciFi gamma detection, or contactless and smart radio transceiver technology provided with radiation monitoring sensors, have been considered and adapted for the use under repository conditions. Indeed, gamma and neutron detection techniques exploit the radiological information coming from inside the drums, while imaging techniques proved to be effective in spotting high density objects embedded inside the concrete: together, they allow to improve safety and security and can provide an early alert on behavioral changes hinting at anomalies in the drums.
A reliable monitoring and oversight system is essential to guarantee the safe operation and eventual closure of radioactive waste disposal facilities. With recent technological advancements, there is now the capability to deploy distributed wireless sensor networks that are cost-effective and low in power consumption. Such networks are versatile, finding applications in several civil, environmental, and industrial sectors. This work presents a novel system and method for identifying and continuously monitoring the integrity of stored radioactive waste packages. The proposed approach, developed by the University of Pisa in the context of the H2020 European Project PREDIS, employs a network of wireless node devices, provided with solid-state micro-power radiation detectors tasked with the measurement of gamma-rays and thermal neutrons coming from within cemented waste drums. Collected data are automatically transmitted across the storage site via Long Range radio technology and forwarded to cloud-based or offline platforms, allowing for further visualization, data processing, and safe storage. The system highlights the feasibility of autonomously and passively gathering data from radioactive waste drums over extended distances (more than 250 m in non-line-of-sight conditions), decreasing the reliance
on portable or automated scanning mechanisms. In line with its capability for autonomous, long-range data collection, the system satisfies the requirement for structural integrity, containment, and confinement of packaging throughout both interim and long-term disposal of radioactive wastes, thereby playing a key role in reinforcing the safe management of radioactive waste.
Residual stress formation during repeated gouging and repair welding cycles of high-strength steels
(2024)
The construction of foundation and erection structures for wind power plants requires the use of modern, sustainable and resource-efficient high-strength fine-grained structural steels. Weld defects due to the welding process are unacceptable. To overcome this issue, local thermal gouging followed by re-welding is a common and cost-effective method. The high shrinkage restraint of the gouge by the surrounding structure can cause crack initiation when design and re-weld induced residual stresses are superimposed. This risk is intensified by the progressive degradation of the microstructure and mechanical properties of high-strength steels during the weld repair process.
This investigation focuses on high-strength steels S500MLO for offshore applications and S960QL for mobile crane applications. The reduction and development of residual stresses caused by local thermal gouging and re-welding was investigated. Digital Image Correlated (DIC) stress-strain analysis was performed during preheating, welding and cooling. The results of the global DIC analysis and local longitudinal and transverse residual stresses of the weld determined by X-ray diffraction were found to be in good agreement. Furthermore, different stress levels were identified during gouging and welding. Repeated repair cycles led to an increase of longitudinal and transverse residual stresses in the weld metal as well as a hardness increase in the heat affected zone.
Machine learning-assisted equivalent circuit identification for dielectric spectroscopy of polymers
(2024)
Polymers have become indispensable across fields of application, and understanding their structure–property relationships and dynamic behaviour is essential for performance optimization. Polymer membranes, particularly ion exchange membranes, play a crucial role in renewable energy conversion technologies, fuel cells, solar energy conversion, and energy storage. In this context, broadband dielectric spectroscopy (BDS) offers a powerful, non-destructive approach to investigate the electrical response and relaxation dynamics of polymers. These properties are investigated by parametrizing the system’s impedance response in terms of a network of circuit elements, i.e. the electrical equivalent circuit (EEC), whose impedance resembles the one of the system under investigation. However, the determination of the EEC from BDS data is challenging due to system complexity, interdependencies of circuit elements, and researcher biases. In this work, we propose a novel approach that incorporates a convolutional neural network (CNN) model to predict the EEC topology. By reducing user bias and enhancing data analysis, this approach aims to make BDS accessible to both experienced users and those with limited expertise. We show that the combination of machine learning and BDS provides valuable insights into the dynamic behaviour of polymer membranes, thus facilitating the design and characterization of tailored polymers for various applications. We also show that our model outperforms state-of-the-art machine learning methods with a top-5 accuracy of around 80% for predicting the circuit topology and a parameter fitting error as low as 0.05%.
Indirect combustion noise due to the interaction of flow inhomogeneities with a choked combustion-chamber exit is an important cause of combustion instability in solid rocket motors.
Moreover, it is believed to be an issue in electrical-power generation turbines and aero-engines. If these flow inhomogeneities are essentially characterized by the fluid having a locally appreciablydifferent thermodynamic state, the acoustic response engendered by its interaction with the combustion-chamber exit is commonly referred to as entropy noise. In this paper, dedicated numerical-simulation results of entropy-patch choked-nozzle interactions are presented. Two types of entropy patches were considered: rectangular slugs and circular spots. Moreover, analytical-model-based analysis, of said simulation results, is presented. Based on said analysis, the authors posit the existence of three modeling regimes: the quasi-steady-modeling regime, the blended-physical-effects regime, and the inertial-modeling regime.
We present our approach and methodology for simulating piping erosion, which occurs during the installation process of suction bucket foundations for offshore wind turbines. We show several simulations and analyze the hydrodynamic and contact forces acting on the granular fabric and the differential pressure of the fluid phase. We demonstrate weak scaling performance on the LUMI supercomputer with a parallel efficiency of up to 90% for 4096 Graphics Compute Dies.
Die Transformation der Energienutzung von konventionellen zu erneuerbaren Quellen führt dazu, dass zukünftig mehr Energie effizient zwischengespeichert werden muss. Eine Möglichkeit der elektrochemischen Zwischenspeicherung bieten Lithium-Ionen-Batterien. Hierfür können ausgemusterte Automobilantriebsbatterien verwendet werden. Erfüllen sie die hohen Anforderungen des mobilen Bereichs nicht mehr, haben sie oftmals noch eine ausreichende Kapazität und Leistungsfähigkeit für die stationäre Zwischenspeicherung.
Neben der Verwendung der Batterien im größeren Maßstab, z.B. bei Energieversorgern, werden durch den vermehrten Einsatz von Photovoltaik-Anlagen in Ein- und Mehrfamilienhäusern verstärkt Zwischenspeicher für Privathaushalte nachgefragt. Dies birgt auch für Einsatzkräfte neue Herausforderungen in der Gefahrenabwehr.
Im vom Bundesministerium für Bildung und Forschung (BMBF) geförderten Verbundprojekt „SEE-2L – Sicherheit elektrochemischer Energiespeicher in Second Life Anwendungen“ wurden Versuche mit Second Life Modulen durchgeführt. Verbundpartner im Projekt waren neben der vfdb die Otto-von-Guericke-Universität Magdeburg und die Bundesanstalt für Materialforschung und -prüfung. Zudem war das Institut der Feuerwehr Nordrhein-Westfalen eingebunden.
Die durchgeführten Versuche bilden eine Grundlage für die Einordnung der Batteriespeicher, z.B. aus Sicht des baulichen Brandschutzes, zur Methodik der Brandbekämpfung oder zur Risikobewertung hinsichtlich der Prozess- und Anlagensicherheit.
Im Beitrag werden die Versuchsergebnisse vorgestellt und Ansätze für deren Anwendung gezeigt. Um die gewonnenen Erkenntnisse zu vermitteln, wurde im Projekt zudem ein Schulungskonzept für Einsätze mit Lithium-Ionen-Technologien erarbeitet, das im Beitrag präsentiert wird. Es besteht aus theoretischen und praktischen Anteilen, sodass bei den Feuerwehren praxisnah aus- bzw. fortgebildet werden kann.
Lithium-ion batteries are a key technology for tackling challenges in energy and climate crisis, but up to 30 % are discarded right after production. Quality is closely related to the homogeneity of the used materials and coatings. Fluorine compounds, both in the polymer and from degradation of the electrolyte, are of special interest for the formation and aging of LIBs. Glow-discharge optical emission spectroscopy (GD-OES) emerged as a fast and convenient method for depth-profiling of battery materials. However, fluorine remains a spectroscopic challenge due to a high excitation energy and only few strong emission lines in the UV/Vis spectral range.
We investigated the partial substitution of argon with neon in the plasma gas. The main emission line at 685.603 nm was monitored by both photo multiplier tube (PMT) with Czerny-Turner monochromator at 20 µm slit-size, and charge-coupled device (CCD) with 1200 lines/mm grating. For calibration, we used a set of hot-pressed copper cylinders with varying calcium fluoride amount fraction, ranging from 1.6 % to 4.4 %. Plasma gas mixtures with a mole fraction of 5 %, 10 % and 20 % neon in argon were used. Sensitivity in comparison to pure argon was increased by factor 4, 7 and 14, respectively. In general, PMT detection was more sensitive than CCD. As expected, sputter rates decreased with higher neon content in the plasma gas. Depth-profiling of the cathodes was performed in pulsed mode at constant voltage and pressure, which resulted in stable plasma conditions. We achieve matrix-independent quantitative information on fluorine distribution by correction based on sputter rates.
This advancement in GD-OES provides a more accurate analytical approach for evaluating the homogeneity of lithium-ion battery materials, potentially leading to more sustainable and cost-effective manufacturing processes.
To address the challenges of the climate crisis, multiple solutions for sustainable energy sources and storage systems are needed. One such solution is lithium-ion batteries (LIBs). Currently, 5 to 30 % of LIBs are discarded immediately after manufacturing. The homogeneous distribution of all materials used in the coating of cathodes and anodes is critical for the quality of LIBs. Furthermore, during formation i.e., the first steps of the charge/discharge cycling, the solid-electrolyte interphase forms on the anode particles, which has a huge impact on the performance. The same happens to some extent on the cathode, forming the cathode-electrolyte interphase. Fluorinated polymers and electrolytes are used in the manufacturing of LIBs. The electrolyte in particular is prone to degradation during formation and aging of the batteries. The interface of the cathode material with the aluminum current collector is also a critical point where degraded fluorine components cause pitting corrosion and at the same time promote passivation of the metal foil. Monitoring the spatial distribution of fluorine on these surfaces and interfaces is essential for sustainable LIB production.
In order to reduce global warming, the use of hydrogen as a renewable energy source is becoming more important. To enable this transition, unprecedently large amounts of hydrogen need to be safely transported and stored. Since hydrogen is usually stored and transported under pressure, one scenario to be considered is the release of hydrogen from a leakage with subsequent ignition. The resulting jet flame must be characterized with respect to the thermal radiation emitted into the environment to define safety distances. Various models that characterize the resulting flame shape and radiation already exist in the literature, but these are mainly based on empirical data from hydrocarbon jet flames. To verify the applicability of these models to hydrogen, real-scale tests are carried out at the BAM Test Site for Technical Safety (BAM-TTS) with the aim to assess the flame geometry and the emitted thermal radiation. Parameters such as leakage diameter (currently up to 30 mm), pressure (currently up to max. 250 bar) and mass flow (up to max. 0.5 kg/s) are varied. In particular, the focus will be laid on the measurement and modelling of the thermal radiation. The challenge here is the characterization of the flame geometry in an open environment and its impact on the thermal radiation. Existing heat radiation data from literature are mostly based on unsteady outflow conditions. The experimental setup used here allows for the generation of a steady-state outflow for several minutes and thus a direct comparability with existing (steady-state) models. Furthermore, stationary outflow tests with hydrocarbons (methane) were also carried out, which are intended to serve as reference tests for checking flame models based on hydrocarbon data. Following from the experimental investigations, modelling parameters such as the Surface Emissive Power (SEP) and the radiant heat fraction for hydrogen and methane will be compared to literature data.
Einleitend wird im Vortrag das Aktivitätsfeld Elektrische Energiespeicher und -umwandlung vorgestellt sowie eine kurze Einführung in die Terminologie der elektrischen Energiespeicher gegeben. Im Folgenden wird das BMBF-Vorhaben SEE-2L vorgestellt. Hier wird der Schwerpunkt auf die Entwicklung und den Aufbau eines Großversuchsstand für das thermische Durchgehen von Lithium-Batterien auf Modul- und Batterieebene gelegt. Darüber hinaus werden die Ergebnisse einer ersten Versuchsserie vorgestellt. Zum Abschluss wird ein kurzer Ausblick zu weiteren anstehenden Versuchen gegeben.
Second Life Verwendungen - Untersuchungen und erste Erfahrungen mit einem Ausbildungsdemonstrator
(2024)
Der Vortrag gibt zunächst einen Themeneinstieg in den Bereich der Second-Life-Batterien sowie rechtliche und technische Grundlagen zu Lebenszyklus und Alterung. Im Weiteren werden experimentelle Ergebnisse aus Versuchen zum thermischen Durchgehen mit Batteriemodulen aus dem BMBF-Vorhaben SEE-2L vorgestellt. Darüber hinaus wird ein eigens entwickelter Ausbildungsdemonstrators vorgestellt, welcher einen wesentlichen Baustein des Ergebnistransfers aus dem Vorhaben darstellt.
The consideration of ageing mechanisms is with integration into the IAEA-requirements now obligatory for the design of transport packages. For packages intended to be used for shipment after storage the consideration of the effects of ageing mechanisms during storage in safety analyses and the implementation of corresponding instructions for operation and maintenance are required. Therefore, these packages have been maintained during storage in a manner that all requirements specified in the IAEA-requirements and in the applicable certificates of approval have been fulfilled.
BAM is the competent authority in Germany for evaluating the thermal and mechanical design of packages for the transport of radioactive materials. In this context, BAM also evaluates the aging mechanisms and aging effects occurring during the long-term storage period of such transport packages. BAM has developed a guideline for the implementation of ageing assessment and of the measures for ageing management into the approval procedure based on IAEA-requirements.
The goal of the presented paper is to introduce this guideline and the general approach for ageing management requirements and to describe the application to a specific package design. The type and amount of the ageing management not only depend on the use of the packaging, but also on the accessibility of the components that are considered in the ageing assessment. The different operating phases of a packaging are considered for the ageing assessment, such as loading, interim storage or transport.
The implementation of measures for ageing management is divided into three levels – systemic measures, package design related measures and documentation. The systemic measures are attributed to the general management system and define the whole activities for organization of ageing management like structure, responsibilities, documentation, reports and evaluation. The package design related measures are defined in an ageing management plan. These measures shall ensure that the anticipated changes of the package design under consideration of ageing effects still complies with the design approval specification. Therefore, an ageing surveillance program and, if necessary, a gap analysis program shall be developed. The ageing management documentation ensures the continuous documentation of the compliance of a specific package to the approved package design, comprising mainly records resulting from operation and surveillance.
The consideration of ageing mechanisms is with integration into the IAEA-requirements now obligatory for the design of transport packages. For packages intended to be used for shipment after storage the consideration of the effects of ageing mechanisms during storage in safety analyses and the implementation of corresponding instructions for operation and maintenance are required. Therefore, these packages have been maintained during storage in a manner that all requirements specified in the IAEA-requirements and in the applicable certificates of approval have been fulfilled.
BAM is the competent authority in Germany for evaluating the thermal and mechanical design of packages for the transport of radioactive materials. In this context, BAM also evaluates the aging mechanisms and aging effects occurring during the long-term storage period of such transport packages. BAM has developed a guideline for the implementation of ageing assessment and of the measures for ageing management into the approval procedure based on IAEA-requirements.
The goal of the presented paper is to introduce this guideline and the general approach for ageing management requirements and to describe the application to a specific package design. The type and amount of the ageing management not only depend on the use of the packaging, but also on the accessibility of the components that are considered in the ageing assessment. The different operating phases of a packaging are considered for the ageing assessment, such as loading, interim storage or transport.
The implementation of measures for ageing management is divided into three levels – systemic measures, package design related measures and documentation. The systemic measures are attributed to the general management system and define the whole activities for organization of ageing management like structure, responsibilities, documentation, reports and evaluation. The package design related measures are defined in an ageing management plan. These measures shall ensure that the anticipated changes of the package design under consideration of ageing effects still complies with the design approval specification. Therefore, an ageing surveillance program and, if necessary, a gap analysis program shall be developed. The ageing management documentation ensures the continuous documentation of the compliance of a specific package to the approved package design, comprising mainly records resulting from operation and surveillance.
A widespread recovery of waste heat requires a cost‐effective production of thermoelectric generators. Thermoelectric oxides are predestined for use at high temperatures. For manufacturing reasons, a multilayer generator design will be easily scalable and cost‐effective. To evaluate the potential of ceramic multilayer technology for that purpose, a multilayer of the promising thermoelectric oxides calcium cobaltite (Ca3Co4O9), calcium manganate (CMO, CaMnO3), and glass–ceramic insulation layers is fabricated. Cracks and reaction layers at the interfaces are observed in the microstructure. The compositions of these reaction layers are identified by energy‐dispersive X‐ray spectroscopy and X‐ray diffraction. Mechanical and thermal properties of all layers are compiled from literature or determined by purposeful sample preparation and testing. Based on this data set, the internal stresses in the multilayer after co‐firing are calculated numerically. It is shown that tensile stresses in the range of 50 MPa occur in the CMO layers. The reaction layers have only a minor influence on the level of these residual stresses. Herein, it is proven that the material system is basically suitable for multilayer generator production, but that the co‐firing process and the layer structure must be adapted to improve densification and reduce the tensile stresses in the CMO.
Im Rahmen des BMBF-Vorhabens SEE-2L wurde auf dem Testgelände Technische Sicherheit (BAM TTS) ein Großversuchsstand für das thermische Durchgehen von Lithium-Batterien auf Modul- und Batterieebene entwickelt und aufgebaut. Im Zuge des Projektes konnte eine erste Versuchsserie zu den Auswirkungen des thermischen Durchgehens von Batteriemodulen durchgeführt werden. Im Vortrag werden die wesentlichen Ergebnisse der Versuche vorgestellt.
The production of formaldehyde on industrial scale requires huge amounts of energy due to the involvement of reforming processes in combination with the demand in the megaton scale. Hence, a direct route for the transformation of (bio)methane to formaldehyde would decrease costs and puts less pressure on the environment. Herein, we report on the use of zinc modified silicas as possible support materials for vanadium catalysts and the resulting consequences for the performance in the selective oxidation of methane to formaldehyde. After optimization of the Zn content and reaction conditions, a remarkably high space-time yield of 12.4 kgCH2O⋅kgcat − 1 ⋅h− 1 was achieved. As a result of the extensive characterization by means of UV–vis, Raman, XANES and NMR spectroscopy it was found that vanadium is in the vicinity of highly dispersed zinc atoms which promote the formation of active vanadium species as supposed by theoretical calculations. This work presents a further step of catalyst development towards direct industrial methane conversion which may help to overcome current limitations in the future.
Low Transformation Temperature (LTT)-Schweißzusätze stellen einen innovativen Ansatz zur Erhöhung der Ermüdungsfestigkeit geschweißter Konstruktionen dar. LTT-Schweißzusätze zeichnen sich durch eine martensitische Phasenumwandlung nahe der Raumtemperatur aus, welche Druckeigenspannungen in der Schweißnaht und der Wärmeeinflusszone (WEZ) generieren.
Dieser Vortrag fokussiert sich auf die gezielte Einbringung zusätzlicher LTT-Lagen an ermüdungskritischen Stellen von konventionell geschweißten Verbindungen. Dies ermöglicht eine ökonomische Anwendung, ohne dass die Schweißnahtintegrität zu stark beeinflusst wird. Die Auswirkungen zusätzlicher LTT-Lagen wurden anhand geschweißter Längssteifen aus hochfestem Stahl hinsichtlich der chemischen Zusammensetzung und der Eigenspannungen untersucht. Unter Variation der Schweißgeschwindigkeit und Abstand zur konventionellen Naht konnten 3 unterschiedliche Nahtausführungen des Chrom-Nickellegierten LTT-Zusatzes bewertet werden.
Die chemische Zusammensetzung wurde mittels OES-Analysen untersucht. Dabei stellte heraus, dass die Aufmischung in allen Varianten sehr ähnlich war trotz teils unterschiedlicher LTT-Volumina. Härtebestimmungen ergaben in allen 3 Varianten eine ähnliche Härte. Daraus lässt sich annehmen, dass die Martensitstarttemperatur bei allen Nahtvarianten ähnlich ist.
Röntgenografische Eigenspannungsmessungen belegen, dass die Eigenspannungen am versa-genskritischen Nahtübergang bei Einsatz von LTT-Schweißzusätzen deutlich abgesenkt werden. Während die konventionelle Schweißnaht Zugeigenspannungen von ca. 350 MPa aufweist, können an den LTT-Nähten teilweise Druckeigenspannungen von bis zu -150 MPa nachgewiesen werden. Je höher der Abstand zur konventionellen Naht und je größer das eingebrachte LTT-Volumen ist, umso stärker sind die Eigenspannungsreduzierungen am Nahtübergang. Da in allen 3 Varianten eine ähnliche Martensitstarttemperatur angenommen werden kann, ist somit die Geometrische Komponente der LTT-Zusatzlage ein entscheidender Faktor für die Eigenspannungsreduzierung.
In 2007 the license for the German Konrad repository for low and intermediate level radioactive waste was finally confirmed. Since then, the site is improved, prepared and equipped for the currently planned start of waste package emplacement in 2029. Bundesanstalt fuer Materialforschung und -pruefung is regularly contracted by the Bundesgesellschaft für Endlagerung as the responsible authority for waste product control, waste container design testing, and waste package acceptance. In this context BAM is mainly responsible for design testing of various container types including the evaluation of quality assurance measures for container manufacturing.
In addition to general requirements concerning container design, the casks have to withstand specific mechanical load scenarios. Drop tests from different heights under consideration of the most damaging drop orientation and a stacking test are two examples for necessary safety demonstrations.
If the containers are made from concrete the reinforcement has the function to absorb tensile forces the concrete is not able to withstand by its own. Because of manufacturing imperfections of cylindrical concrete containers manufactured already decades ago, the reinforcement cages are not always exactly, asymmetrically positioned when they were poured. This inspired BAM to perform various ABAQUS® finite-element (FE) simulations by using the example of a simplified cylindrical container design with generic dimensions. On the basis of the calculated tensile and compressive stress distributions suggestions are derived on how a cylindrical concrete container with an imperfectly placed reinforcement cage has to be oriented for a drop or stacking test to ensure the most damaging test scenario.
Dem AVK-Arbeitskreis Wasserstoff-Drucktanks werden ausgehend von Zielen und Aufgaben der BAM sowie der Fachkompetenz auf dem Gebiet der Sicherheit von Composite-Druckbehältern über die prüftechnische Ausstattung, die angewendeten und weiterentwickelten Prüf- und Untersuchungsmethoden sowie zu Beispielen von Forschungsvorhaben wie DELFIN, COLIBRI und SH2APED berichtet.
Packages for the transport of radioactive material are designed to en-dure severe accidents. Packages for the transportation of radioactive material must demonstrate that the package can withstand certain prescribed tests from the IAEA Regulations [1]. In addition to mechanical tests, a thermal test in form of a fire test must be carried out. As packages to be tested at BAM are signifi-cantly larger than previous package designs, BAM has expanded an existing fire test stand. A modular concept is chosen, which means that the arrangement of the burner nozzles can be adapted to the test specimen. The dimensions of the burner rings, the type, the orientation and the number of burner nozzles can be varied depending on the test specimen. In addition, various pumps can be used to set the corresponding mass flow. With the help of a calorimeter test, the fire test stand can be qualified for a specific size of packages regarding the boundary conditions of the IAEA Regulations [1]. Due to the typically wood filled impact limiters in German package designs, a fire test is necessary, as experiments have shown that possible openings that occurred during a mechanical test contributed to the igni-tion of the wood filled impact limiters within the prescribed 30 minutes of the IAEA Regulations [1]. From a series of experiments, two experiments are pre-sented to show the possibilities to obtain different temperatures and temperature rates in the test specimen. In addition to sensor data, the heat flux into the package is calculated to verify that the IAEA boundary conditions are satisfied. In addition to the temperature data, other data such as wind speed and wind direction are also recorded to explain subsequent effects in the measurement data in a comprehen-sible manner.
Acceptable limits for activity release from transport casks for high-level radioactive material specified in the IAEA regulations must be kept by the integrity of cask body and the cask sealing system. BAM as the German competent authority for mechanical, thermal and containment assessment of packages liable for approval verifies the activity release compliance with the regulatory limits. The specification of conservative package design leakage rates is one of the most important aspects in assessment.
Metal seals of the Helicoflex® Type are usually used to ensure the required package tightness for both, storage, and transport of the cask before and after storage. Due to the long-term use the seal behavior is influenced by temperature and time. The mechanical and thermal loadings associated with the routine, normal and accident conditions of transport specified in the regulations can have a significant effect on the leak tightness of the sealing system. Whereas the safety for application of new, non- aged Helicoflex® seals is verified sufficiently, there are still technical data gaps concerning the efficiency of aged Helicoflex® seals.
BAM performed experiments to learn more about the sealing efficiency of aged Helicoflex® seals with Aluminum and Silver outer jackets. The seals were compressed in test-flanges and for artificial ageing the complete flange systems were stored in an oven for several month at a high temperature. After this ageing procedure the flanges were opened completely, the seals were moved a little to vary the contact area, and the flanges were compressed again. During the compression and decompression tests after the aging, load-deformation characteristics of the seals, and leakage rates were measured.
With these tests a load situation was simulated, which can occur in the regulatory drop test of the cask: Under high impact loads the bolted lid can lift a little for a short moment, allowing a little movement of the seal, so that the contact area can change before compressing again.
Details about test conditions and first results will be presented in the poster.
Packages for the transport of radioactive material are designed to en-dure severe accidents. Packages for the transportation of radioactive material must demonstrate that the package can withstand certain prescribed tests from the IAEA Regulations [1]. In addition to mechanical tests, a thermal test in form of a fire test must be carried out. As packages to be tested at BAM are signifi-cantly larger than previous package designs, BAM has expanded an existing fire test stand. A modular concept is chosen, which means that the arrangement of the burner nozzles can be adapted to the test specimen. The dimensions of the burner rings, the type, the orientation and the number of burner nozzles can be varied depending on the test specimen. In addition, various pumps can be used to set the corresponding mass flow. With the help of a calorimeter test, the fire test stand can be qualified for a specific size of packages regarding the boundary conditions of the IAEA Regulations [1]. Due to the typically wood filled impact limiters in German package designs, a fire test is necessary, as experiments have shown that possible openings that occurred during a mechanical test contributed to the igni-tion of the wood filled impact limiters within the prescribed 30 minutes of the IAEA Regulations [1]. From a series of experiments, two experiments are pre-sented to show the possibilities to obtain different temperatures and temperature rates in the test specimen. In addition to sensor data, the heat flux into the package is calculated to verify that the IAEA boundary conditions are satisfied. In addition to the temperature data, other data such as wind speed and wind direction are also recorded to explain subsequent effects in the measurement data in a comprehen-sible manner.
Germany had been transporting spent fuel to the reprocessing plant in Sellafield and La Hague for decades until around 2005. Resulting from the obligation to take back the vitrified high-level waste from reprocessing six CASTOR® HAW28M filled with 168 canisters with radioactive waste in vitrified form were transported from Sellafield to the interim storage facility Biblis in 2020. Rail wagons were used for the transport to the port in Barrow-in-Furness, where they were loaded into a dedicated seagoing vessel, certified as INF Class 3 according to the INF Code. This was the first time that vitrified high level waste with considerable heat load was transported under a German design approval certificate.
BAM was involved in the authority assessment of the conditions for the sea transport. For the first transport BAM required among others, assessment of temperature distribution during transport, logging of temperatures of cargo bays and graphical imaging of temperatures of the bay with the cask in order to ensure compliance with temperature specifications, e.g. maximal neutron absorber and gasket temperatures. Special interest was taken in the identification of possible events exceeding the specified temperatures considering the different philosophies of IMDG code and its supplement INF code regarding temperature control of hatches. Results show compliance with assumed conditions.
Electron Back Scatter Diffraction (EBSD) is a very versatile analytical technique allowing for the characterization of material structure. Historically, diffraction images (Kikuchi patterns) registered during EBSD analysis were solved using Hough/Radon transformation. The last decade brought several novel techniques of experimental pattern analysis, focusing entirely on image analysis routines such as pattern matching, or various variants of High-Resolution EBSD. However, all the above-mentioned techniques require prior knowledge of the material structure to perform orientation analysis. The recently presented algorithm employed in Crystallographic Analysis of Lattice Metric (CALM) software, effectively removes this limitation enabling a standard-less analytical approach in EBSD systems. At its core, the CALM technique couples accurate detection of the Kikuchi bands position, with a rigid construction of reciprocal lattice resulting from translational crystal symmetry. A unique characteristic of the methodology also gives an opportunity for application in the analysis of continuous lattice changes, for example tetragonality mapping. During mapping, however, the geometry of the gnomonic projection (represented by the projection center) is continuously altered decreasing overall algorithm efficiency. The work presents an analysis of the projection center in terms of precision and accuracy.
Germany had been transporting spent fuel to the reprocessing plant in Sellafield and La Hague for decades until around 2005. Resulting from the obligation to take back the vitrified high-level waste from reprocessing six CASTOR® HAW28M filled with 168 canisters with radioactive waste in vitrified form were transported from Sellafield to the interim storage facility Biblis in 2020. Rail wagons were used for the transport to the port in Barrow-in-Furness, where they were loaded into a dedicated seagoing vessel, certified as INF Class 3 according to the INF Code. This was the first time that vitrified high level waste with considerable heat load was transported under a German design approval certificate.
BAM was involved in the authority assessment of the conditions for the sea transport. For the first transport BAM required among others, assessment of temperature distribution during transport, logging of temperatures of cargo bays and graphical imaging of temperatures of the bay with the cask in order to ensure compliance with temperature specifications, e.g. maximal neutron absorber and gasket temperatures. Special interest was taken in the identification of possible events exceeding the specified temperatures considering the different philosophies of IMDG code and its supplement INF code regarding temperature control of hatches. Results show compliance with assumed conditions.
Der Abschlussbericht stellt die wesentlichen Arbeitsschritte und Ergebnisse des Teilvorhabens der BAM im BMBF-Vorhaben SEE-2L vor. Im Rahmen dieses Vorhabens wurde auf dem Testgelände Technische Sicherheit (BAM TTS) ein Großversuchsstand für das thermische Durchgehen von Lithium-Batterien auf Modul- und Batterieebene entwickelt und aufgebaut. Im Zuge des Projektes konnte eine erste Versuchsserie zu den Auswirkungen des thermischen Durchgehens von Batteriemodulen durchgeführt werden. Der Abschlussbericht umfasst zwei Teile, im Teil I den Kurzbricht und im Teil II die eingehende Darstellung.
The characterization of really unknown phases typically uses 70 to 150 reflectors for lattice metric calculation. The determination of the lattice parameters follows with 4% accuracy. Including a Z correction up to 1% can be reached. The precision of the lattice parameters ratios (a:b:c) is, however, better than 0.1%.
Der Bau von Gründungs- und Turmstrukturen für Windkraftanlagen erfordert den Einsatz moderner, nachhaltiger und ressourcenschonender hochfester Feinkornbaustähle. Durch den Schweißprozess verursachte Schweißnahtfehler sind nicht akzeptabel. Um diese zu beheben, ist das lokale thermische Fugenhobeln mit anschließendem Reparaturschweißen ein gängiges und wirtschaftliches Verfahren. Die hohe Schrumpfbehinderung um die ausgefugte Nut durch das umgebende Gefüge kann zu Rissbildung führen, wenn sich konstruktiv bedingte Spannungen und Eigenspannungen aus der Reparaturschweißung überlagern. Diese Gefahr wird durch die Verschlechterung der Mikrostruktur und der mechanischen Eigenschaften hochfester Stähle während des Schweißreparaturprozesses noch verstärkt.
For the hydrogen-based energy economy of tomorrow, the construction of the necessary infrastructure will play a central role. Most materials used to date, such as welded steels, can be prone to hydrogen embrittlement under certain conditions. This includes the classic delayed cold cracking during welding as well as degradation phenomena during service of components in hydrogen-containing environment. For the evaluation of any hydrogen effect, for example, on the mechanical properties of a welded metallic material, the hydrogen content must be precisely determined. In the case of weld seams, the carrier gas hot extraction (CGHE) according to ISO 3690 is meanwhile state-of-the-art. CGHE is based on accelerated hydrogen degassing due to the thermal activation of hydrogen at elevated temperatures. In addition to the quantification of hydrogen, thermal desorption analysis (TDA) with varying heating rates can be used to determine and evaluate the hydrogen trapping at microstructural defects in the material. For both techniques, experimental and metrological influences must be considered, which have a major effect on the result. For example, ISO 3690 suggests different sample geometries and minimum extraction times for CGHE. This study summarizes the results and experiences of numerous investigations at the Federal Institute for Materials Research and Testing (BAM) with different sample temperatures and geometries (ISO 3690 type B and cylindrical TDA samples) regarding the influence of the sample surface (polished/welded), measurement accuracy depending on the sample volume and the insufficient monitoring of the effect of PI control on the extraction temperature. A deviating extraction temperature from the target temperature can significantly falsify the measurement results. Based on the results, methods are shown which allow the desired extraction temperature to be reached quickly without physically interfering with the measuring equipment. This serves to significantly improve the reliability of the hydrogen measurement through increased signal stability and accelerated hydrogen desorption. In general, an independent temperature measurement with dummy samples is recommended for the heating procedure of choice to exclude possible undesired temperature influences before the measurement. The methods described can be transferred directly to industrial applications