Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Dokumenttyp
Referierte Publikation
- ja (112) (entfernen)
Schlagworte
- Laser beam welding (29)
- Additive manufacturing (11)
- Microstructure (11)
- Laser metal deposition (10)
- Mechanical properties (9)
- Resistance spot welding (7)
- Laser welding (5)
- Liquid metal embrittlement (5)
- Numerical modeling (5)
- Process monitoring (5)
- Solidification cracking (5)
- Thermography (5)
- Additive Manufacturing (4)
- Artificial neural network (4)
- DED (4)
- Hybrid laser-arc welding (4)
- Numerical simulation (4)
- Porosity (4)
- Selective laser melting (SLM) (4)
- 9%Ni steel (3)
- Crack (3)
- Dimensional accuracy (3)
- Hybrid laser arc welding (3)
- LMD (3)
- Laser implantation (3)
- Laser powder bed fusion (L-PBF) (3)
- Magnetic field (3)
- Magnetohydrodynamics (3)
- Mechanical mismatching (3)
- Multi-physical modelling (3)
- Residual stress (3)
- Solidification (3)
- Ti-6Al-4V (3)
- TiB2 (3)
- Welding simulation (3)
- 3D printing (2)
- AISI D2 (2)
- Additive Fertigung (2)
- Advanced high strength steels (2)
- Critical strain (2)
- Deep penetration (2)
- Dissimilar metal weld overlays (2)
- Dual phase steel (2)
- Electron beam welding (2)
- Element transport (2)
- Equivalent heat source (2)
- Finite element simulation (2)
- Full penetration (2)
- Grain refinement (2)
- Grain size (2)
- High power laser beam welding (2)
- High-power laser beam welding (2)
- Hot crack (2)
- Inconel 718 (2)
- Infrared thermography (2)
- Keyhole dynamics (2)
- Laser Powder Bed Fusion (2)
- Laser beam melting (LBM) (2)
- Laser energy distribution (2)
- Matching ferritic welding electrode (2)
- Melt pool dynamics (2)
- Metal mixing (2)
- Neutron diffraction (2)
- Process simulation (2)
- Quality assurance (2)
- Ray tracing (2)
- Refill friction stir spot welding (2)
- Simulation (2)
- Surface texturing (2)
- Temperature distribution (2)
- Thermografie (2)
- Thick-walled steel (2)
- Wire arc additive manufacturing (2)
- 3D Druck (1)
- AC magnetic field (1)
- AGIL (1)
- AHSS (1)
- AISI 316L (1)
- AM (1)
- AM feature integration (1)
- Adaptive control (1)
- Adaptive remeshing (1)
- Adaptive welding beam oscillation (1)
- Additive Manufacturing (AM) (1)
- Additive manufacturing (AM) (1)
- Advanced high strength steel (1)
- Advanced high-strength steel (1)
- Advanced high-strength steels (1)
- Al/Ti dissimilar joints (1)
- AlMg0.7SiTiB filler wire (1)
- AlSi10Mg (1)
- Aluminum alloys (1)
- Aluminum bronze (1)
- Artificial Intelligence (1)
- Austenitic welding electrode (1)
- Automated manufacturing (1)
- Automatisierte Fertigung (1)
- Automotive application (1)
- Bending test (1)
- Boundary element method (1)
- Build-up strategy (1)
- Bulge effect (1)
- Bulge formation (1)
- Bulging effect (1)
- Bulging effects (1)
- CFD model (1)
- Carbon dioxide footprint (1)
- Characterisation (1)
- Circumferential weld (1)
- Clad steels (1)
- Clustering (1)
- Coarse grained heat affected zone (1)
- Coarse-grained heat-affected zone (1)
- Columnar crystal growth (1)
- Computed Tomography (1)
- Computed tomography (CT) (1)
- Computer vision (1)
- Convolutional neural network (1)
- Cracking (1)
- Crater (1)
- Crystal branch development (1)
- Crystal plasticity (1)
- DED-EB (1)
- DIC (1)
- Damage prediction (1)
- Data fusion (1)
- Data preparation (1)
- Deep learning (1)
- Deep penetration laser beam welding (1)
- Deformed geometry (1)
- Dendrite growth (1)
- Density measurement (1)
- Deposition rate (1)
- Deposition welding (1)
- Design of experiments (1)
- Die-cast aluminum (1)
- Die-casted aluminum (1)
- Digital image correlation (1)
- Digitalisierung (1)
- Digitalization (1)
- Digitization (1)
- Direct Energy Deposition (1)
- Direct energy deposition (1)
- Direct laser deposition (1)
- Directed energy deposition (1)
- Displacement (1)
- Dissimilar friction stir welding (1)
- Dissimilar joints (1)
- Dissimilar materials (1)
- Duplex AISI 2205 (1)
- Duplex steels (1)
- Dwell-time (1)
- EBAM (1)
- EBSD (1)
- Edge quality (1)
- Electro-thermomechnical model (1)
- Electrode geometry (1)
- Electromagnetic (1)
- Electromagnetic field (1)
- Electromagnetic influence (1)
- Electromagnetic stirring (1)
- Electromagnetic support (1)
- Electromagnetic supported degassing (1)
- Electromagnetic weld pool support (1)
- Emisssivity (1)
- End crater (1)
- Environment (1)
- Environmental impact categories (1)
- Equivalent stress concentration factors (1)
- Fatigue (1)
- Ferromagnetic steels (1)
- Fiber laser (1)
- Filler wire mixing (1)
- Finite element method (1)
- Finite element method (FEM) (1)
- Flange width (1)
- Flüssigmetallinduzierte Rissbildung (1)
- Fresnel reflection (1)
- Friction stir welding (1)
- Fusion zone (1)
- Fusion zone profile (1)
- Fusion zone size (1)
- Fusion zone, nickel alloys (1)
- GMA welding (1)
- GMR sensors (1)
- GTAW (1)
- Galvanized steel (1)
- Gap bridgeability (1)
- Gap bridging (1)
- General analytical solutions (1)
- Gleeble testing (1)
- Grade S960QL steel (1)
- Grain structure (1)
- HSLA (1)
- Hardly separable problem (1)
- Hardness (1)
- Heat conduction (1)
- Heat flow (1)
- Heat generation (1)
- Heat input (1)
- High brightness (1)
- High power (1)
- High process speeds (1)
- High strength steels (1)
- High-Power Welding (1)
- High-power laser beam (1)
- High-strength low-alloy steel (1)
- High-strength steel sheets (1)
- Highspeed-plasma-laser-cladding (1)
- Hochfester Stahl (1)
- Hohlprofilknoten (1)
- Hold time (1)
- Hot Cracks (1)
- Hot cracking (1)
- Hot-Stamping (1)
- Hybrid Laser-Arc Welding (1)
- IR-Spektroskopie (1)
- IR-spectroscopy (1)
- Impact absorbed energy (1)
- In situ strain (1)
- In-situ Process Monitoring (1)
- Inconel 625 (1)
- Inconel 939 (1)
- Instumented indentation test (1)
- Integrated alignment features (1)
- Joining technology (1)
- Kerbspannungskonzept (1)
- Keyhole collapse (1)
- Keyhole mode welding (1)
- Keyhole stability (1)
- L-PBF (1)
- LME (1)
- LPBF (1)
- Lack-of-fusion (1)
- Lamé curves (1)
- Lamé curves approximation (1)
- Laser Metal Deposition (1)
- Laser Powder Bed Fusion (L-PBF) (1)
- Laser Pulver Auftragsschweißen (1)
- Laser beam melting (1)
- Laser beam welding (LBW) (1)
- Laser cutting (1)
- Laser dispersing (1)
- Laser energy absorption (1)
- Laser hybrid welding (1)
- Laser keyhole welding (1)
- Laser melting (1)
- Laser powder bed fusion (1)
- Laser powder-based directed energy deposition (1)
- Laser surfacing (1)
- Laser-Pulver-Auftragschweißen (1)
- Life cycle assessment (1)
- Liquid Metal Embrittlement (1)
- Localized laser dispersing (1)
- Lorentz force (1)
- Low carbon steel (1)
- Low feed rates (1)
- Low heat input GMA welding (1)
- Low heat input Gma welding (1)
- MHD (1)
- MWIR (1)
- Magnesium Alloy (1)
- Magnesium alloy (1)
- Magnetic stray field (1)
- Magnetohydrodynamics (MHD) (1)
- Matching ferritic filler metal (1)
- Material modeling (1)
- Mathematical modeling (1)
- Mechanical anisotropy (1)
- Mechanical property (1)
- Mechanical-technological properties (1)
- Melt pool defects (1)
- Metal (1)
- Metallic vapour plume (1)
- Microstructure Tensile strength (1)
- Model calibration (1)
- Model order reduction (1)
- Molten pool (1)
- Molten pool dynamics (1)
- Multi-materials joining (1)
- Multi-physical modeling (1)
- Multispectral thermography (1)
- NIR (1)
- Narrow gap welding (1)
- Neural networks (1)
- Neutron Diffraction (1)
- Ni-based austenitic filler metal (1)
- Ni-based austenitic welding electrode (1)
- Ni-based superalloy (1)
- NiCrBSi (1)
- Nickel (1)
- Nickel alloys (1)
- Non-destructive Materials (1)
- Notch stress approach (1)
- Numerical analysis (1)
- Numerical investigation (1)
- Numerical process simulation (1)
- Numerical simulations (1)
- Numerical welding simulation (1)
- Numerical welding simulations (1)
- Online Process Monitoring (1)
- Open science (1)
- Open source (1)
- Optical measurement (1)
- Optical measurment technique (1)
- Optical tomography (1)
- Oscillating magnetic field (1)
- Oscillating vapor plume (1)
- Parabolic flight (1)
- Partial penetration (1)
- Partial penetration welding (1)
- Path planning (1)
- Periodic solidification pattern (1)
- Phase field method (1)
- Pipe Welding (1)
- Pipe weld preparation (1)
- Pipeline steel of grade X120 (1)
- Plasma cutting (1)
- Plastic deformation (1)
- Plastic material flow (1)
- Plume heating (1)
- Pool dimensions (1)
- Porosity reduction (1)
- Post-weld heat treatment (1)
- Precipitation hardening aluminum alloys (1)
- Preheating (1)
- Process development (1)
- Proper generalized decomposition (1)
- RSW (1)
- Ray teacing (1)
- Ray-tracing methods (1)
- Research data management (1)
- Residual Stress (1)
- Residual stresses (1)
- Retained Austenite (1)
- SMAW (1)
- SS316L alloy (1)
- SWIR (1)
- Safety (1)
- Schweißnahtgeometrie (1)
- Seam geometry (1)
- Secondary heat source (1)
- Selective Laser Melting (1)
- Selective Laser Melting (SLM) (1)
- Sensor (1)
- Ship building (1)
- Shipbuilding steel (1)
- Software (1)
- Stainless steels (1)
- Standardisation (1)
- Steady-state weld pool (1)
- Steel and Al (1)
- Strain fields prediction (1)
- Strain rate (1)
- Strain-rate (1)
- Stress-strain behavior (1)
- Submerged arc welding (1)
- Superalloy (1)
- Surface cracks (1)
- TES (1)
- TIG welding (1)
- TIG-welding (1)
- Temperature emissivity separation (1)
- Tensile properties (1)
- Tensile resistance spot welding experiment (1)
- Testing method (1)
- Texture (1)
- Thermal cycles (1)
- Thermal-fluid-structure coupling model (1)
- Thermo-fluid dynamics (1)
- Thermo-fluid flow (1)
- Thick materials (1)
- Thick-Walled Steel (1)
- TiC (1)
- TiN (1)
- Titanium alloy (1)
- Tool service life (1)
- Tool-workpiece interaction (1)
- Toughness (1)
- Transformable steels (1)
- Transient heat transfer (1)
- Tubular joints (1)
- Tungsten carbide (1)
- Turbine components (1)
- Two-dimensional solidification (1)
- Two-run welding technique (1)
- Vapor recondensation (1)
- Viscoplasticity (1)
- Void defect formation mechanism (1)
- Wear resistance (1)
- Weld end crater (1)
- Weld pool (1)
- Weld pool behavior (1)
- Weld pool dynamics (1)
- Weld pool shape (1)
- Weld root (1)
- Weld seam geometry (1)
- Welding (1)
- Welding parameter (1)
- Welding process simulation (1)
- Weldx (1)
- Widerstandspunktschweißen (1)
- Wineglass shape (1)
- Wire electron beam additive manufacturing (1)
- Wire feed laser beam welding (1)
- Wire-based additive manufacturing (1)
- X-ray Diffraction (1)
- X-ray computed tomography (1)
- X38CrMoV5-3 (1)
- Zinc (1)
- Zinc coated steel (1)
- Zink (1)
- digital image correlation (1)
- dual phase steel (1)
- resistance spot welding (1)
- µ-gravity (1)
- Äquivalente Spannungskonzentrationsfaktoren (1)
Organisationseinheit der BAM
- 9.3 Schweißtechnische Fertigungsverfahren (112) (entfernen)
Laser beam oscillation, applied one- or two-dimensional to the actual welding process, influences the welding process in terms of compensation of tolerances and reduction of process emissions like spatter and melt ejections that occur in industrial applications, such as in body-in-white manufacturing. If the welding process could be adapted to these tolerances by the momentarily demanded melt pool width to generate sufficient melt volume or to influence melt pool dynamics, e.g. for a better degassing, laser welding would become more robust. However, beam oscillation results are highly dependent on the natural frequency of the melt pool, the used spot diameter and the oscillation speed of the laser beam. The conducted investigations with an oscillated 300 μm laser spot show that oscillation strategies which are adjusted to the joining situation can bridge gaps to approximately 0.6 mm at metal sheet thickness of 0.8 mm. However, the complex behaviour of the melt pool has to be considered to generate proper welding results. This work puts emphasis on showing aspects of beam oscillation in fillet welding in lap joints.
Build-up strategies for temperature control using laser metal deposition for additive manufacturing
(2018)
The track geometry created with laser metal deposition (LMD) is influenced by various parameters. In this case, the laser power has an influence on the width of the track because of an increasing energy input. A larger melt pool is caused by a rising temperature. In the case of a longer welding process, there is also a rise in temperature, resulting in a change of the track geometry. This paper deals with the temperature profiles of different zigzag strategies and spiral strategies for additive manufacturing. A two-color pyrometer is used for temperature measurement on the component surface near the melt pool. Thermocouples measure the temperatures in deeper regions of a component. The welds are located in the center and in the edge area on a test part to investigate the temperature evolution under different boundary conditions. The experiments are carried out on substrates made from mild steel 1.0038 and with the filler material 316L. The investigations show an influence on the temperature evolution by the travel path strategy as well as the position on the part. This shows the necessity for the development and selection of build-up strategies for different part geometries in additive manufacturing by LMD.
An approach to develop an arc sensor for gap width estimation during automated NG-GMAW with a weaving electrode motion is introduced by combining arc sensor readings with optical measurements of the groove shape to allow precise analyses of the process. The two test specimen welded for this study were designed to feature a variable groove geometry in order to maximize efficiency of the conducted experimental efforts, resulting in 1696 individual weaving cycle records with associated arc sensor measurements, process parameters and groove shape information. Gap width was varied from 18 mm to 25 mm and wire feed rates in the range of 9 m/min to 13 m/min were used in the course of this study. Artificial neural networks were applied as a modelling tool to derive an arc sensor for estimation of gap width suitable for online process control that can adapt to changes in process parameters as well as changes in the weaving motion of the electrode. Wire feed rate, weaving current, sidewall dwell currents and angles were defined as inputs to calculate the gap width. The evaluation of the proposed arc sensor model shows very good estimation capabilities for parameters sufficiently covered during the experiments.
One of the main factors affecting the use of lasers in the industry for welding thick structures is the process accompanying solidification cracks. These cracks mostly occurring along the welding direction in the welding center, and strongly affect the safety of the welded components. In the present study, to obtain a better understanding of the relation between the weld pool geometry, the stress distribution and the solidification cracking, a three-dimensional computational fluid dynamic (CFD) model was combined with a thermo-mechanical model. The CFD model was employed to analyze the flow of the molten metal in the weld pool during the laser beam welding process. The weld pool geometry estimated from the CFD model was used as a heat source in the thermal model to calculate the temperature field and the stress development and distributions. The CFD results showed a bulging region in the middle depth of the weld and two narrowing areas separating the bulging region from the top and bottom surface. The thermo-mechanical simulations showed a concentration of tension stresses, transversally and vertically, directly after the solidification during cooling in the region of the solidification cracking.
Laser metal deposition (LMD) is an established technology for two-dimensional surface coatings. It offers high deposition rates, high material flexibility, and the possibility to deposit material on existing components. Due to these features, LMD has been increasingly applied for additive manufacturing of 3D structures in recent years. Compared to previous coating applications, additive manufacturing of 3D structures leads to new challenges regarding LMD process knowledge. In this paper, the process steps for LMD as additive manufacturing technology are described. The experiments are conducted using titanium alloy Ti-6Al-4Vand Inconel 718. Only the LMD nozzle is used to create a shielding gas atmosphere. This ensures the high geometric flexibility needed for additive manufacturing, although issues with the restricted size and quality of the shielding gas atmosphere arise. In the first step, the influence of process parameters on the geometric dimensions of single weld beads is analyzed based on design of experiments. In the second step, a 3D build-up strategy for cylindrical specimen with high dimensional accuracy is described. Process parameters, travel paths, and cooling periods between layers are adjusted. Tensile tests show that mechanical properties in the as-deposited condition are close to wrought material. As practical example, the fir-tree root profile of a turbine blade is manufactured. The feasibility of LMD as additive technology is evaluated based on this component.
Low heat input gas metal arc welding for dissimilar metal weld overlays part II: the transition zone
(2018)
Dissimilar metal weld overlays (DMWOL) of nickel base alloys on low alloy steel components are commonly used in the oil and gas, petrochemical, and power generation industries to provide corrosion and oxidation resistance in a wide range of service environments and temperatures. Traditionally, dissimilar weld overlays are produced using cold or hot wire gas tungsten arc welding. This study aims to identify and evaluate potential advantages of low heat input gas metal arc welding processes over the conventional gas tungsten arc welding in the production of dissimilar weld overlays. In order to evaluate the quality of these overlays regarding resistance against hydrogen-assisted cracking, their transition zone region is investigated in this part of the publication series. Metallurgical characterization, including energy-dispersive x-ray spectroscopy, is performed on Alloy 625/grade 22 steel overlays. The transition zone is characterized by a narrow planar growth zone and steep compositional gradients from the fusion boundary towards the weld metal. Evidence of low carbon contents in the planar growth zone, as well as for carbide precipitation in the cellular growth zone was found. The microstructure in the transition zone region of the fusion zone shows characteristics known to be suitable for good resistance against hydrogen embrittlement.
Laser metal deposition (LMD) has been applied as a coating technology for many years. Today, the technologies capacity to produce 3D depositions leads to a new field of application as additive manufacturing method. In this paper, 3D laser metal deposition of titanium alloy Ti-6Al-4V is studied with special regard to the demands of additive manufacturing. Therefore, only the coaxial LMD powder nozzle is used to create the shielding gas atmosphere, which ensures high geometric flexibility. Furthermore, specimen with high aspect ratio and hundreds of layers are manufactured, which represent typical features in additive manufacturing. The presented study contains the following steps: First, cylindrical specimens are manufactured with a standard shell-core build-up strategy and mechanical properties as well as fracture mechanisms are determined. Based on the results, experiments are conducted to improve the build-up strategy and new tensile test specimens are built with the improved strategy. The improved strategy incorporates variable track overlap ratios to achieve a constant growth in the shell and core area. As blanks, lean cylinders comprising more than 240 layers and a height of more than 120mm are manufactured. The specimens are analyzed by X-ray inspection for material defects. Fractured surfaces are observed via scanning electron microscopy and the composition of the surfaces is determined using energy dispersive X-ray spectroscopy. The tensile test results prove mechanical properties close to ASTM F1108 specification for wrought material.
Partial penetration welding with fiber laser on 20mm thick plates was carried out in horizontal position to study the role of secondary heating in modeling of high power fiber laser welding. Experiments were carried out using 18.8kW laser with 1.5 m/min welding speed at Ar assist gas flow rates of 0, 17, 29, and 40 l/min, all four cases show similar bead shape with bright emission of vapor plume. Numerical simulations were performed using volume of fluid method by considering three different models as models A–C. Model A considers only Fresnel reflection inside the keyhole using real time tracking of free surface. Model B considers vapor recondensation flux inside keyhole along with model A. Finally, model C is used, which considers vapor plume heating at 4100K temperature along with models A B. Secondary heating by recondensation and vapor plume is vital in modeling of high power fiber laser welding; especially, the upper part of the bead is more influenced due to secondary heating. Tungsten particles are also used to visualize the flow pattern of melt pool.
A three-dimensional multi-physics numerical model was developed for the calculation of an appropriate equivalent volumetric heat source and the prediction of the transient thermal cycle during and after fusion welding. Thus the modelling process was separated into two studies. First, the stationary process simulation of full-penetration keyhole laser beam welding of a 15 mm low-alloyed steel thick plate in flat position at a welding speed of 2 m/min and a laser power of 18 kW was performed. A fixed keyhole with a right circular cone shape was used to consider the energy absorbed by the workpiece and to calibrate the model. In the calculation of the weld pool geometry and the local temperature field, the effects of phase transition, thermo-capillary convection, natural convection and temperature-dependent material properties up to evaporation temperature were taken into account. The obtained local temperature field was then used in a subsequent study as an equivalent heat source for the computation of the transient thermal field during the laser welding process and the cooling stage of the part. The system of partial differential equations, describing the stationary heat transfer and the fluid dynamics, were strongly coupled and solved with the commercial finite element software COMSOL Multiphysics 5.0. The energy input in the transient heat transfer simulation was realised by prescription of the nodes temperature. The prescribed nodes reproduced the calculated local temperature field defining the equivalent volumetric heat source. Their translational motion through the part was modelled by a moving mesh approach. An additional remeshing condition and helper lines were used to avoid highly distorted elements. The positions of the elements of the polygonal mesh were calculated with the Laplace’s smoothing approach. Good correlation between the numerically calculated and the experimentally observed weld bead shapes and transient temperature distributions was found.
In recent years, laser beam welding has found wide applications in many industrial fields. Solidification cracks are one of the most frequently encountered welding defects that hinder obtaining a safe weld joint. Decades of research have shown that one of the main causes of such cracks are the strain and the strain rate. Obtaining meaningful measurements of these strains has always been a major challenge for scientists, because of the specific environment of the measurement range and the many obstacles, as well as the high temperature and the plasma plume. In this study, a special experimental setup with a high-speed camera was employed to measure the strain during the welding process. The hot cracking susceptibility was investigated for 1.4301 stainless steel, and the critical strain required for solidification crack formation was locally and globally determined.
Distortions in Additive Manufacturing (AM) Laser Metal Deposition (LMD) occur in the newly-built component due to rapid heating and solidification and can lead to shape deviations and cracking. This paper presents a novel approach to quantify the distortions experimentally and to use the results in numerical simulation validation. Digital Image Correlation (DIC) is applied together with optical filters to measure in-situ distortions directly on a wall geometry produced with LMD. The wall shows cyclic Expansion and shrinking with the edges bending inward and the top of the sample exhibiting a slight u-shape as residual distortions. Subsequently, a structural Finite Element Analysis (FEA) of the experiment is established, calibrated against experimental temperature profiles and used to predict the in-situ distortions of the sample. A comparison of the experimental and numerical results reveals a good agreement in length direction of the sample and quantitative deviations in height direction, which are attributed to the material model used. The suitability of the novel experimental approach for measurements on an AM sample is shown and the potential for the validated numerical model as a predictive tool to reduce trial-and-error and improve part quality is evaluated.
The paper describes an experimental investigation of the electromagnetic porosity reduction in partial penetration laser beam welding of 6 mm thick aluminum die casting AlSi9MnMg. The Investigation reveals that the usage of an electromagnetic field leads to a significant reduction of the porosity as well as to a surface smoothing of aluminum die casting. Based on the reference case without an electromagnetic influence, the porosity area was reduced gradually up to 76%.
Metallurgical pores as well as process pores were removed from the weld pool. Also the weld reinforcement was improved up to 78%. Best results were reached with a frequency of 4325 Hz and a magnetic flux density of 348 mT. Although a complete prevention of porosity was not achieved, the best weld seam reached a high quality and can be ranked in valuation group B of DIN EN ISO 13919-2:2001–12.