Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Erscheinungsjahr
- 2019 (14) (entfernen)
Dokumenttyp
- Zeitschriftenartikel (14)
Sprache
- Englisch (14)
Referierte Publikation
- ja (14) (entfernen)
Schlagworte
- Laser beam welding (5)
- Dual phase steel (2)
- High power laser beam welding (2)
- Resistance spot welding (2)
- Advanced high strength steel (1)
- Advanced high strength steels (1)
- Boundary element method (1)
- Bulging effect (1)
- Circumferential weld (1)
- Coarse-grained heat-affected zone (1)
- Crack (1)
- Cracking (1)
- Critical strain (1)
- Deposition welding (1)
- Dissimilar metal weld overlays (1)
- Electro-thermomechnical model (1)
- Electrode geometry (1)
- Electromagnetic stirring (1)
- Element transport (1)
- End crater (1)
- Finite element method (1)
- Full penetration (1)
- Fusion zone (1)
- Grain size (1)
- Grain structure (1)
- Heat conduction (1)
- Highspeed-plasma-laser-cladding (1)
- Hot crack (1)
- Hot cracking (1)
- Hybrid laser-arc welding (1)
- Inconel 718 (1)
- LME (1)
- Laser Powder Bed Fusion (1)
- Laser welding (1)
- Liquid metal embrittlement (1)
- Low heat input GMA welding (1)
- MHD (1)
- Magnetohydrodynamics (1)
- Mechanical properties (1)
- Mechanical property (1)
- Microstructure (1)
- NiCrBSi (1)
- Nickel alloys (1)
- Numerical analysis (1)
- Numerical simulation (1)
- Optical measurment technique (1)
- Oscillating magnetic field (1)
- Process simulation (1)
- RSW (1)
- Selective Laser Melting (1)
- Solidification (1)
- Testing method (1)
- Thermo-fluid dynamics (1)
- Thermo-fluid flow (1)
- Thick materials (1)
- Tungsten carbide (1)
- Wear resistance (1)
- Weld pool behavior (1)
- Welding process simulation (1)
- Zinc coated steel (1)
- digital image correlation (1)
- dual phase steel (1)
- resistance spot welding (1)
Organisationseinheit der BAM
The present work deals with the development of a strategy for the prevention of end crater defects in high-power laser welding of thick-walled circumferential welds. A series of experiments were performed to understand the influence of the welding Parameters on the formation of end crater defects such as pores, cracks, root excess weld metal and shrinkage cavities in the overlap area. An abrupt switch-off of the laser power while closing the circumferential weld leads to a formation of a hole which passes through the whole welded material thickness. A laser power ramp-down causes solidification cracks which are initiated on the transition from full-penetration mode to partial penetration. Defocusing the laser beam led to promising results in terms of avoiding end crater defects. Cracks and pores in the overlap area could be effectively avoided by using defocusing techniques.
A strategy for avoiding of end crater imperfections was tested on flat specimens of steel grade S355J2 with a wall thickness of between 8 mm and 10 mm and then transferred on the 10 mm thick pipe sections made of high-strength pipeline steel API5L-X100Q.
A 3D electro-thermomechanical model is established in order to investigate liquid metal embrittlement.
After calibration to a dual phase steel of the 1000 MPa tensile strength class, it is used to analyse the thermo-mechanical system of an experimental procedure to enforce liquid metal embrittlement during resistance spot welding. In this procedure, a tensile stress level is applied to zinc coated advanced high strength steel samples during welding. Thereby, liquid metal embrittlement formation is enforced, depending on the applied stress level and the selected material.
The model is suitable to determine and visualise the corresponding underlying stresses and strains responsible for the occurrence of liquid metal embrittlement. Simulated local stresses and strains show good conformity with experimentally observed surface crack locations.
Using a novel optical measurement technique together with the optical flow algorithm, a two-dimensional deformation analysis during welding was conducted. The presented technique is the first to provide a measurement of the full strain field locally in the immediate vicinity of the solidification front.
Additionally, the described procedure of the optical measurement allows the real material-dependent values of critical strain and strain rate characterizing the transition to hot cracking during laser welding processes to be determined. Furthermore, the above-mentioned technique is independet on the welding process, which means, it can be also used for arc welding processes. Dependency between the external strain rate and the critical local strain and strain rate has been observed. That is to say, the critical local strain and strain rate is increased with an increase of the strain rate.Moreover, this technique allows automatic identification of the cases that can be critical for the solidification crack formation by monitoring the state of strain on the crack-sensitive region within the mushy zone.
The shape of the weld pool in laser beam welding plays a major role to understand the dynamics of the melt and its solidification behavior. The aim of the present work was its experimental and numerical investigation. To visualize the geometry of the melt pool in the longitudinal section a butt joint configuration of 15 mm thick structural steel and transparent quartz glass was used. The weld pool shape was recorded by means of a high-speed video camera and two thermal imaging MWIR and VIS cameras. The observations show that the dimensions of the weld pool vary depending on the depth. The regions close to the surface form a teardrop shaped weld pool. A bulge-region and its temporal evolution were observed approximately in the middle of the depth of the weld pool. Additionally, a transient numerical simulation was performed until reaching a steady state to obtain the weld pool shape and to understand the formation mechanism of the observed bulging phenomena. A fixed keyhole with an experimentally obtained shape was used to represent the full-penetration laser beam welding process. The model considers the local temperature field, the effects of phase transition, thermo-capillary convection, natural convection and temperature-dependent material properties up to evaporation temperature. It was found that the Marangoni convection and the movement of the laser heat source are the dominant factors for the formation of the bulging-region. Good correlation between the numerically calculated and the experimentally observed weld bead shapes and the time-temperature curves on the upper and bottom surface were found.