Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Erscheinungsjahr
Dokumenttyp
Sprache
- Englisch (101)
- Deutsch (25)
- Russisch (2)
- Italienisch (1)
- Mehrsprachig (1)
Schlagworte
- Laser beam welding (35)
- Solidification cracking (19)
- Laser metal deposition (11)
- Hybrid laser arc welding (10)
- Additive manufacturing (9)
- Laser welding (8)
- Hybrid laser-arc welding (7)
- Microstructure (7)
- Thick-walled steel (7)
- Critical strain (6)
- Laserstrahlschweißen (6)
- Numerical simulation (6)
- Additive Manufacturing (5)
- Hot cracking test (5)
- Laser Metal Deposition (5)
- Mechanical properties (5)
- Thermography (5)
- Additive Fertigung (4)
- Electromagnetic weld pool support (4)
- Elektromagnetische Schmelzbadunterstützung (4)
- Inconel 718 (4)
- Laser-Pulver-Auftragschweißen (4)
- Laserhybridschweißen (4)
- Stainless Steel (4)
- 316L (3)
- 9%Ni steel (3)
- High power laser beam welding (3)
- Hot cracking (3)
- Hybrid Laser Arc Welding (3)
- Laser hybrid welding (3)
- Mechanical mismatching (3)
- Partial penetration (3)
- Ti-6Al-4V (3)
- Weld pool shape (3)
- Aluminium (2)
- Austenitic stainless steels (2)
- Bulging effect (2)
- CTW-Test (2)
- Charpy impact toughness (2)
- Circumferential weld (2)
- Cryogenic steel (2)
- Defokussierung (2)
- Duplex AISI 2205 (2)
- Duplex stainless steel (2)
- Duplex steels (2)
- Edge effects (2)
- Electromagnetic weld pool control (2)
- End crater (2)
- Endkrater (2)
- Ferromagnetischer Stahl (2)
- Full penetration (2)
- Gap bridgeability (2)
- Hardness (2)
- Heißrissresistenz (2)
- Hot crack (2)
- Hybrid welding (2)
- In situ strain (2)
- LMD (2)
- Laser beam Welding (2)
- Laser-Hybridschweißen (2)
- Local critical strain (2)
- Matching ferritic welding electrode (2)
- Material transport (2)
- Melt pool dinamics (2)
- Nickel (2)
- Optical flow (2)
- Optical measurement (2)
- Optical measurment technique (2)
- Pipe manufacturing (2)
- Pipeline (2)
- Preheating (2)
- Process monitoring (2)
- Rundnaht (2)
- SMAW (2)
- Ship building (2)
- Single pass welding (2)
- Strain rate (2)
- Temperature behavior (2)
- Thermal cycles (2)
- Thermografie (2)
- Weld defects (2)
- Weld pool (2)
- Weldability (2)
- laser welding (2)
- Überlappbereich (2)
- 3D Druck (1)
- 3D printing (1)
- 3DDruck (1)
- 9%Ni steel, (1)
- AC magnetic field (1)
- Additiv (1)
- Analytical model (1)
- Artificial Intelligence (1)
- As-shielded arc welding (1)
- Aufbaustrategie (1)
- Austenitic welding electrode (1)
- Austenitische Stähle (1)
- Bending test (1)
- Build - up Strategy (1)
- Build-up strategy (1)
- Bulge effect (1)
- Bulging (1)
- CFD model (1)
- CFD-model (1)
- CO2 lasers (1)
- CTW test (1)
- Clad steels (1)
- Combined laser manufacturing (1)
- Contact element (1)
- Conventional Ni-based austenitic welding electrode (1)
- Convolutional neural network (1)
- Corrosion (1)
- Crater (1)
- Critical strain rate (1)
- Cryogenic Steel (1)
- DIC technique (1)
- Deposition rate (1)
- Dickblech (1)
- Different welding position (1)
- Digitale Bildkorrelationstechnik (1)
- Direct Energy Deposition (1)
- Direct Laser Metal Deposition (1)
- Direct energy deposition (1)
- Duplex (1)
- Duplex stainless steels (1)
- Edge quality (1)
- Electromagnetic Force (1)
- Electromagnetic Weld Pool Support (1)
- Electromagnetic backing (1)
- Electromagnetic stirring (1)
- Electromagnetic support (1)
- Electromagnetic weld pool support system (1)
- Elektromagnetische Badstütze (1)
- Elektromagnetische Schmelzbadsicherung (1)
- Elektromagnetische Schmelzbadstütze (1)
- Element transport (1)
- Equivalent heat source (1)
- Externally loaded test (1)
- FE-model (1)
- FEA (1)
- FEM (1)
- Ferritic welding electrode (1)
- Ferromagnetic steel (1)
- Ferromagnetic steels (1)
- Festigkeit (1)
- Fiber laser (1)
- Filler material distribution (1)
- Filler wire mixing (1)
- Fine-grained Steel (1)
- Finite element analysis (1)
- Finite element method (FEM) (1)
- Flow pattern (1)
- Fresnel reflection (1)
- Full Penetration (1)
- Full penetration welding (1)
- Fusion zone size (1)
- GTAW (1)
- Gas shielded arc welding (1)
- Hartmann effect (1)
- Heat flow (1)
- Heat source models (1)
- Heißriss (1)
- Heißrissanfälligkeit (1)
- High brightness (1)
- High power (1)
- High power laser keyhole welding (1)
- High strength steel (1)
- High-Power Welding (1)
- High-power Laserbeam Welding (1)
- High-power fibre laser (1)
- High-power laser beam (1)
- High-power laser beam welding (1)
- High-strength low-alloy steel (1)
- Hochfester Stahl (1)
- Hochleistungsschweißen (1)
- Hybrid Laser-Arc Welding (1)
- Hybrid-laser-arc welding (1)
- Hydrostatic and arc pressure exceed the Laplace pressure (1)
- IR-Spektroskopie (1)
- IR-spectroscopy (1)
- Imaging (1)
- Impact absorbed energy (1)
- Kaltzähe Stähle (1)
- Keyhole mode laser beam welding (1)
- Keyhole mode welding (1)
- Keyhole stability (1)
- Lamé curves approximation (1)
- Laser Beam Welding (1)
- Laser Metal Deposition (LMD) (1)
- Laser Metal Deposition; Laser Beam Welding; Duplex; Stainless Steel (1)
- Laser Powder Bed Fusion (1)
- Laser Pulver Auftragsschweißen (1)
- Laser beam weliding (1)
- Laser cutting (1)
- Laser keyhole welding (1)
- Laser metal deposition (LMD) (1)
- Laser metal fusion (1)
- Laser surfacing (1)
- Laser-Pulver-Auftragschweißen (LPA) (1)
- Laser-Pulver-Auftragschweißen; Laserstrahlschweißen, Duplex, Pufferschichten (1)
- Laser-beam welding, (1)
- Laser-hybrid welding (1)
- Laserpulverauftragschweißen (1)
- Laserstrahl-(Hybrid)schweißen (1)
- Laserstrahl-MSG-Hybridschweißen (1)
- Liquid Metal Embrittlement (1)
- Lokale Effekte (1)
- Longitudinal weld (1)
- Lorentz force (1)
- Low Temperature Toughness (1)
- Lötrissigkeit (1)
- MSG-Schweißen (1)
- MWIR (1)
- Macro Processing (Joining, Welding) (1)
- Magnetic bath support (1)
- Magnetic field (1)
- Magnetohydrodynamics (1)
- Magnettechnik (1)
- Maintenance (1)
- Manganese (1)
- Marangoni flow (1)
- Matching ferritic filler metal (1)
- Mechanical Properties (1)
- Mechanical-technological properties (1)
- Melt pool dynamics (1)
- Metal (1)
- Metal mixing (1)
- Microstructure Tensile strength (1)
- Misalignment of edges (1)
- Modellierung (1)
- Modified spray arc (1)
- Multi - physical modeling (1)
- Multi-physical modelling (1)
- Multispectral thermography (1)
- NIR (1)
- Natural convection (1)
- Ni-based austenitic filler metal (1)
- Ni-based austenitic welding electrode (1)
- Nickel-based superalloy (1)
- Novel metrology (1)
- Novel optical measurement (1)
- Novel optical metrology (1)
- Numerical modeling (1)
- Numerical modelling (1)
- Numerical process simulation (1)
- Numerical simulations (1)
- Optical measurement technique (1)
- Optische Emissionsspektroskopie (OES) (1)
- Oscillating magnetic field (1)
- Partial penetration welding (1)
- Pendelstrategie (1)
- Penetration depth (1)
- Pipe Welding (1)
- Pipeline steel X120 (1)
- Pipeline steel of grade X120 (1)
- Plasma cutting (1)
- Plasma-cut samples (1)
- Plume heating (1)
- Post-weld heat treatment (1)
- ProMoAM (1)
- Process chain (1)
- Process simulation (1)
- Pufferschichten (1)
- Repair and overhaul (1)
- Rissanfälligkeit (1)
- Rissbildung (1)
- SEP-1220-3 (1)
- SWIR (1)
- Schallemissionsanalyse (SEA) (1)
- Schweißeignung (1)
- Schweißen von kaltzähen Stählen (1)
- Schweißunregelmäßigkeiten (1)
- Secondary heat source (1)
- Selective Laser Melting (1)
- Self-restraint test (1)
- Shielding gases (1)
- Shipbuilding steel (1)
- Simulation (1)
- Single-pass welding (1)
- Software (1)
- Solidification (1)
- Solidification behaviour (1)
- Solidification craking (1)
- Spiralstrategie (1)
- Stainless steel (1)
- Stainless steels (1)
- Strain fields prediction (1)
- Strain measurement (1)
- Submerged arc welding (1)
- Superelliptic Lamé curves (1)
- TES (1)
- Temperature distribution (1)
- Temperature emissivity separation (1)
- Temperaturentwicklung (1)
- Tensile strength (1)
- Thermal analysis (1)
- Thermo-fluid flow (1)
- Thermographie (1)
- Thick Materials (1)
- Thick materials (1)
- Thick plate welding (1)
- Thick plates (1)
- Thick-Walled Steel (1)
- Thick-plate welding (1)
- Thick-walled Structures (1)
- Ti - 6Al - 4V (1)
- Toughness (1)
- Turbine blade (1)
- Turbine industry (1)
- Two-run welding technique (1)
- Untersuchung laserstrahlgeschweißter Verbindungen (1)
- V-notch impact toughness (1)
- Vacuum (1)
- Vakuum (1)
- Vapor recondensation (1)
- Weld imperfections (1)
- Weld pool geometry (1)
- Weld pool shape approximation (1)
- Weld pool support (1)
- Weld root (1)
- Welding simulation (1)
- Welding thermal cycle (1)
- Werkstofffragen (1)
- Werkstoffranking (1)
- Widerstandspressschweißen (1)
- Widerstandspunktschweißen (1)
- Windkraftanlagen (1)
- X8Ni9 (1)
- YAG lasers (1)
- cryogenic steel (1)
- hardness (1)
- hochfeste Stähle (1)
- laser hybrid welding (1)
- local effects (1)
- microstructure (1)
- tensile strength (1)
- thermal cycles (1)
- thick plate welding (1)
- vacuum (1)
- Ökonomische und ökologische Vorteile (1)
Organisationseinheit der BAM
- 9 Komponentensicherheit (93)
- 9.3 Schweißtechnische Fertigungsverfahren (91)
- 8 Zerstörungsfreie Prüfung (6)
- 8.0 Abteilungsleitung und andere (6)
- 1 Analytische Chemie; Referenzmaterialien (2)
- 1.9 Chemische und optische Sensorik (2)
- 9.0 Abteilungsleitung und andere (2)
- 8.1 Sensorik, mess- und prüftechnische Verfahren (1)
Eingeladener Vortrag
- nein (11)
Full penetration high power bead-on-plate laser beam welding tests of up to 20 mm thick 2205 duplex steel plates were performed in PA position. A contactless inductive electromagnetic (EM) weld pool support system was used to prevent gravity drop-out of the melt. Welding experiments with 15 mm thick plates were carried out using IPG fiber laser YLR 20000 and Yb:YAG thin disk laser TruDisk 16002. The laser power needed to achieve a full penetration was found to be 10.9 and 8.56kW for welding velocity of 1.0 and 0.5 m min(-1), respectively. Reference welds without weld pool support demonstrate excessive root sag. The optimal value of the alternating current (AC) power needed to completely compensate the sagging on the root side was found to be approximate to 1.6 kW for both values of the welding velocity. The same EM weld pool support system was used in welding tests with 20 mm thick plates. The laser beam power (TRUMPF Yb:YAG thin disk laser TruDisk 16002) needed to reach a full penetration for 0.5 m min(-1) was found to be 13.9 kW. Full penetration welding without EM weld pool support is not possible-the surface tension cannot stop the gravity drop-out of the melt. The AC power needed to completely compensate the gravity was found to be 2 kW. (C) 2016 Laser Institute of America
Controlling the dynamics in the weld pool is a highly demanding challenge in deep-penetration laser beam welding with modern high power laser systems in the multi kilowatt range. An approach to insert braking forces in the melt which is successfully used in large-scaled industrial applications like casting is the so-called Hartmann effect due to externally applied magnetic fields. Therefore, this study deals with its adaptation to a laser beam welding process of much smaller geometric and time scale. In this paper, the contactless mitigation of fluid dynamic processes in the melt by steady magnetic fields was investigated by numerical simulation for partial penetration welding of aluminium. Three-dimensional heat transfer, fluid dynamics including phase transition and electromagnetic field partial differential equations were solved based on temperature-dependent material properties up to evaporation temperature for two different penetration depths of the laser beam. The Marangoni convection in the surface region of the weld pool and the natural convection due to the gravitational forces were identified as main driving forces in the weld pool. Furthermore, the latent heat of solide-liquid phase transition was taken into account and the solidification was modelled by the Carman-Kozeny equation for porous medium morphology. The results show that a characteristic change of the flow pattern in the melt can be achieved by the applied steady magnetic fields depending on the ratio of magnetic induced and viscous drag. Consequently, the weld bead geometry was significantly influenced by the developing Lorentz forces. Welding experiments with a 16 kW disc laser with an applied magnetic flux density of around 500 mT support the numerical results by showing a dissipating effect on the weld pool dynamics.
High-power laser beam welding became new stimuli within the last 10 years due to the availability of a new generation of high brightness multi kilowatt solid state lasers. In the welding research new approaches have been developed to establish reliable and praxis oriented welding processes meeting the demands of modern industrial applications during this time. The paper focuses on some of the current scientific and technological aspects in this research field like hybrid laser arc welding, simulation techniques, utilization of electromagnetic fields or reduced pressure environment for laser beam welding processes, which contributed to the further development of this technology or will play a crucial role in its further industrial implementation.
In this study, a three-dimensional CFD-simulation model was developed to simulate the fluid flow in the weld pool. The CFD-model showed a bulging region in the middle of the depth, which is separated from the top surface and bottom surface by two narrowing regions. It can be concluded that the interaction of the movement of the laser source with the Marangoni vortex leads to a teardrop shape at the upper and bottom surface of the workpiece. Additionally, it shows that the bulging in the weld is a result of the backflows on the upper and lower sides due to the thermo-capillary-driven flows. The weld pool shape was used as a heat source in a two-dimensional thermomechanical model, which allows a highly accurate transformation of the weld pool dimensions obtained from the CFD model. This developed technique allows the consideration of physical aspects, which cannot be considered when using traditional heat sources. The mechanical model has shown that the chronological order of the solidification of the weld has a significant influence on the nature and distribution of the stresses in the weld. High tensile stress has been observed in the bulging region, i.e. in the susceptible region for solidification cracking, when compared to the other narrowing regions, which show compressive stress.
One of the main factors affecting the use of lasers in the industry for welding thick structures is the process accompanying solidification cracks. These cracks mostly occurring along the welding direction in the welding center, and strongly affect the safety of the welded components. In the present study, to obtain a better understanding of the relation between the weld pool geometry, the stress distribution and the solidification cracking, a three-dimensional computational fluid dynamic (CFD) model was combined with a thermo-mechanical model. The CFD model was employed to analyze the flow of the molten metal in the weld pool during the laser beam welding process. The weld pool geometry estimated from the CFD model was used as a heat source in the thermal model to calculate the temperature field and the stress development and distributions. The CFD results showed a bulging region in the middle depth of the weld and two narrowing areas separating the bulging region from the top and bottom surface. The thermo-mechanical simulations showed a concentration of tension stresses, transversally and vertically, directly after the solidification during cooling in the region of the solidification cracking.
In this study, the influence of the welding speed and the arc power on the solidification crack formation for partial penetration laser hybrid welded Thick-Walled plates were investigated. Experimentally, a linear correlation between the welding velocity and the crack number was observed. That is by reducing the welding velocity the crack number was reduced.
The reduced welding velocity showed a strong impact on stress, as the model demonstrated a very lower stress amount in comparison to the reference case. The reduction of the welding speed could be a helpful technique to reduce the hot cracking. The wire feed speed showed a very slight influence on the crack formation. That can be returned to the large distance between the critical region for cracking and the arc region.
A self-restraint hot cracking test (free edge test) was used in combination with a novel optical measurement technique to determine the critical straining conditions for solidification cracking for the stainless steel grade 1.4828 (AISI 309). The Lucas-Kanade algorithm for the optical flow (OF) calculation was implemented to obtain the full-field displacement and then the full-field strain.
The use of external laser illumination with appropriate filters allows to obtain good image quality with good contrast. The critical straining conditions required for solidification cracking can be obtained by means the proposed technique in the immediate vicinity of the solidification front. A very good repeatability was demonstrated for the used measurement technique. The critical straining conditions for solidification cracking for the tested steel und under this welding conditions has been detected
Solidification cracking phenomena taking place under Controlled Tensile Weldability (CTW) test conditions have already been investigated both experimentally and numerically via FEA in order to get a better understanding of the mechanisms of hot crack formation during laser beam welding of austenitic steel grades. This paper develops a three dimensional finite element model employing the contact elements technique to simulate the formation and propagation of solidification cracks during laser full penetration welding of fully austenitic stainless steel 1.4376. During the experimental procedure the resulting strain and displacement directed to the laser beam in the Close vicinity of the weld pool was measured at the surface of the workpiece using a Digital Image Correlation (DIC) technique with an external diode laser as an illuminating source. Local strain fields, global loads and crack lengths predicted by the model are in good Agreement with those observed in experiments.
Laser welding is a widely established manufacturing process in many industry sectors. Solidification cracking represents one of the most inadequately solved problems in welding and has major economic implications. The avoidance of hot crack forms for most fusion welding processes poses a key challenge for an important range of metallic construction materials and affects not only the manufacturers of welding equipment and material manufacturers, but also a large number of customers using welding technologies, as well as welding technical standardization and research. Solidification cracking susceptibility was examined with the help of the Controlled Tensile Weldability Test (CTW) developed by Federal Institute for Materials Research and Testing (BAM), Berlin. The test is based on the fact that hot crack formation depends on a critical strain that emerges within a critical temperature range, the so called brittle temperature range (BTR). Using this test and defined investigation programme a centreline solidification crack was generated. By controlling the applied strain during the laser beam welding process, it was possible to determine the critical strain and strain rate that led to solidification cracking formation. The hot cracking susceptibility of the tested stainless steels was qualified and quantified. The results demonstrate that the crack length increases with increasing applied strain. Furthermore, the strain rate has a significant influence on the formation of the solidification crack.
Laser welding is a widely established manufacturing process in many industry sectors. Solidification cracking represents one of the most inadequately solved problems in welding and has major economic implications. The avoidance of hot crack is for most fusion welding processes a key challenge for an important range of metallic construction materials and affects not only the manufacturers of welding equipment and material manufacturers, but also a large number of customers using welding technologies, as well as welding standardization and research. In this study a new investigation programme has been developed to qualify the hot cracking susceptibility of a variety of austenitic stainless steels. The results show the possibility of using this technique to determinate the critical values that occur with initiation of solidification cracking during laser beam welding