Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (169)
- Beitrag zu einem Tagungsband (108)
- Vortrag (41)
- Forschungsbericht (6)
- Buchkapitel (1)
- Tagungsband (Herausgeberschaft für den kompletten Band) (1)
- Posterpräsentation (1)
- Forschungsdatensatz (1)
Sprache
- Englisch (237)
- Deutsch (83)
- Russisch (6)
- Italienisch (1)
- Mehrsprachig (1)
Schlagworte
- Laser beam welding (69)
- Additive manufacturing (19)
- Solidification cracking (19)
- Laser metal deposition (18)
- Mechanical properties (13)
- Microstructure (13)
- Numerical simulation (13)
- Additive Manufacturing (11)
- Laser welding (11)
- Laserstrahlschweißen (11)
- DED (10)
- Inconel 718 (10)
- Resistance spot welding (10)
- Thick-walled steel (9)
- Additive Fertigung (8)
- Hybrid laser arc welding (8)
- Hybrid laser-arc welding (8)
- Numerical modeling (8)
- Weld pool shape (8)
- Widerstandspunktschweißen (8)
- Porosity (7)
- Critical strain (6)
- Element transport (6)
- Hochfester Stahl (6)
- Laser Metal Deposition (6)
- Laserhybridschweißen (6)
- Liquid metal embrittlement (6)
- Magnetohydrodynamics (6)
- Ti-6Al-4V (6)
- Welding simulation (6)
- AM (5)
- Artificial neural network (5)
- Directed Energy Deposition (5)
- Electromagnetic weld pool support (5)
- Gründungsstrukturen (5)
- High power laser beam welding (5)
- Hot cracking (5)
- Hot cracking test (5)
- Hybrid Laser Arc Welding (5)
- Laser hybrid welding (5)
- Laser-Pulver-Auftragschweißen (5)
- Liquid Metal Embrittlement (5)
- Magnetic field (5)
- Simulation (5)
- Solidification (5)
- Crack (4)
- Deep penetration (4)
- Deep penetration laser beam welding (4)
- Directed energy deposition (4)
- Duplex stainless steel (4)
- Elektromagnetische Schmelzbadunterstützung (4)
- Endkrater (4)
- Grain refinement (4)
- Offshore Windenergieanlagen (4)
- Stainless Steel (4)
- Weld pool dynamics (4)
- 316L (3)
- 9%Ni steel (3)
- Advanced high strength steels (3)
- Automatisierte Fertigung (3)
- Bulging effect (3)
- CTW-Test (3)
- Cryogenic steel (3)
- Crystal branch development (3)
- Design of experiments (3)
- Digitalisierung (3)
- Electromagnetic Weld Pool Support (3)
- End crater (3)
- Equivalent heat source (3)
- FEA (3)
- Friction stir welding (3)
- Full Penetration (3)
- Gap bridgeability (3)
- Heat conduction (3)
- Heat treatment (3)
- Künstliche Intelligenz (3)
- L-PBF (3)
- Laser (3)
- Laser energy distribution (3)
- Laser implantation (3)
- Laserimplantation (3)
- Leichtbau (3)
- MSG-Schweißen (3)
- Mathematical modeling (3)
- Mechanical mismatching (3)
- Molten pool dynamics (3)
- Multi-physical modelling (3)
- Numerical modelling (3)
- Numerical process simulation (3)
- Partial penetration (3)
- Periodic solidification pattern (3)
- Process simulation (3)
- Quality assurance (3)
- Ray tracing (3)
- Refill friction stir spot welding (3)
- Rundnaht (3)
- Selective Laser Melting (3)
- Thick Materials (3)
- Transient heat transfer (3)
- AC weld pool support (2)
- AHSS (2)
- AISI D2 (2)
- Advanced high strength steel (2)
- Aluminium (2)
- Auftragschweißen (2)
- Austenitic stainless steels (2)
- Automatisierte schweißtechnische Fertigung (2)
- Bulge effect (2)
- Bulge formation (2)
- Charpy impact toughness (2)
- Circumferential weld (2)
- Clad steels (2)
- Cladding parameter (2)
- Coarse-grained heat-affected zone (2)
- DED-EB (2)
- Data preparation (2)
- Defokussierung (2)
- Die-cast aluminum (2)
- Dimensional accuracy (2)
- Directed Enery Deposition (2)
- Dissimilar metal weld overlays (2)
- Dual phase steel (2)
- Duplex AISI 2205 (2)
- EBAM (2)
- Edge effects (2)
- Edge quality (2)
- Electromagnetic backing (2)
- Electromagnetic influence (2)
- Electromagnetic support (2)
- Electromagnetic weld pool control (2)
- Electron beam welding (2)
- Elektronenstrahlschweißen (2)
- Energy efficiency (2)
- FEM (2)
- FGM (2)
- Ferromagnetischer Stahl (2)
- Festigkeit (2)
- Finite element method (2)
- Finite element simulation (2)
- Flüssigmetallinduzierte Rissbildung (2)
- Full penetration (2)
- GMAW (2)
- Grain size (2)
- Hardness (2)
- Heißrissresistenz (2)
- High power welding (2)
- High-power laser beam welding (2)
- High-strength low-alloy steel (2)
- Hot crack (2)
- Hybrid components (2)
- Hybrid welding (2)
- In situ strain (2)
- Keyhole collapse (2)
- Keyhole mode welding (2)
- LME (2)
- Laser Powder Bed Fusion (2)
- Laser Welding (2)
- Laser beam Welding (2)
- Laser cladding (2)
- Laser-Hybridschweißen (2)
- Laser-metal-deposition (2)
- Lichtbogensensorik (2)
- Life cycle assessment (LCA) (2)
- Lightweight concepts (2)
- Local critical strain (2)
- Matching ferritic welding electrode (2)
- Melt pool dinamics (2)
- Melt pool dynamics (2)
- Metal mixing (2)
- Moving mesh (2)
- Neuronales Netz (2)
- Nickel (2)
- Nickel alloys (2)
- Optical flow (2)
- Optical measurement (2)
- Oscillating magnetic field (2)
- Oscillating vapor plume (2)
- PBF-LB/M (2)
- Path planning (2)
- Pipe manufacturing (2)
- Pipeline (2)
- Porosity reduction (2)
- Preheating (2)
- Process chain (2)
- Process monitoring (2)
- Qualitätssicherung (2)
- RSW (2)
- Residual stress (2)
- Rissanfälligkeit (2)
- SMAW (2)
- Schweißnahtbewertung (2)
- Schweißsimulation (2)
- Schweißstruktursimulation (2)
- Seam geometry (2)
- Single pass welding (2)
- Strain rate (2)
- Submerged arc welding (2)
- Superellipse (2)
- Surface structuring (2)
- Temperature behavior (2)
- Testing method (2)
- Thermal cycles (2)
- Thermo-fluid flow (2)
- TiB2 (2)
- Transformable steels (2)
- Ultrasonic vibration (2)
- Umweltwirkungen (2)
- Unterpulverschweißen (2)
- Verfahrensvergleich (2)
- WAAM (2)
- Weld defects (2)
- Weld pool (2)
- Weldability (2)
- Welding of aluminum (2)
- Welding of thick metal plates (2)
- Welding thermal cycle (2)
- Wire arc additive manufacturing (2)
- Wire electron beam additive manufacturing (2)
- Zinc coated steel (2)
- Zink (2)
- laser welding (2)
- resistance spot welding (2)
- Ökobilanzierung (2)
- Überlappbereich (2)
- 3D FE-simulation (1)
- 3D-FE-Simulation (1)
- 3DDruck (1)
- 9%Ni steel, (1)
- AC magnetic field (1)
- AC magnetic fields (1)
- AGIL (1)
- AM feature integration (1)
- Adaptive control (1)
- Adaptive welding beam oscillation (1)
- Additiv (1)
- Additive (1)
- Advanced High-Strength Steel (AHSS) (1)
- Advanced high-strength steel (1)
- Advanced high-strength steels (1)
- Al-Mg-Si-Legierungen (1)
- Al/Mg alloys (1)
- AlMg0.7SiTiB filler wire (1)
- Alloy 247 (1)
- Aluminium-Druckguss (1)
- Aluminum alloy 2024-T3 (1)
- Aluminum alloys (1)
- Aluminum bronze (1)
- Analytical model (1)
- Arc sensor (1)
- Arc welding (1)
- Artificial Intelligence (1)
- Artungleiche Werkstoffe (1)
- As-shielded arc welding (1)
- Aufbaustrategie (1)
- Aufgelöste Tragstrukturen (1)
- Auftriebskräfte (1)
- Austenitic welding electrode (1)
- Austenitische Stähle (1)
- Automated manufacturing (1)
- Automated welding (1)
- Automation (1)
- Automatisierte schweißtechniche Fertigung (1)
- Automatisierung (1)
- Automobilindustrie (1)
- Automotive application (1)
- Bead-on-plate welds (1)
- Bending test (1)
- Bewegtes Gitter (1)
- Bionik (1)
- Boundary element method (1)
- Build - up Strategy (1)
- Build direction (1)
- Build-up Orientation (1)
- Build-up strategy (1)
- Bulging (1)
- Bulging effects (1)
- CFD model (1)
- CFD-model (1)
- CO2 lasers (1)
- CTW test (1)
- Calculation time (1)
- Carbon dioxide footprint (1)
- Charpy V-notch tests (1)
- Cimensional Accuracy (1)
- Circumferential welds (1)
- Clustering (1)
- Coarse grained heat affected zone (1)
- Cold Cracking Test (1)
- Columnar crystal growth (1)
- Combined laser manufacturing (1)
- Computer vision (1)
- Condition monitoring (1)
- Contact element (1)
- Conventional Ni-based austenitic welding electrode (1)
- Convolutional neural network (1)
- Corrosion (1)
- Cracking (1)
- Cracking susceptibility (1)
- Cracking susceptibility of AHSS (1)
- Cracks in the HAZ (1)
- Crater (1)
- Critical strain rate (1)
- Cryogenic Steel (1)
- CuSn1 (1)
- DED-LB (1)
- DIC (1)
- DIC technique (1)
- DIP transfer (1)
- Damage prediction (1)
- Datenbankstruktur (1)
- Deep learning (1)
- Deformed geometry (1)
- Dendrite growth (1)
- Density measurement (1)
- Deposition rate (1)
- Deposition welding (1)
- Dickblech (1)
- Die-casted aluminum (1)
- Different welding position (1)
- Digital Image Correlation (1)
- Digital factory (1)
- Digitale Bildkorrelationstechnik (1)
- Digitalization (1)
- Digitization (1)
- Direct Energy Deposition (1)
- Direct Laser Metal Deposition (1)
- Direct energy deposition (1)
- Directed Energy Depositio (1)
- Dissimilar joints (1)
- Dissimilar welding (1)
- Distortion (1)
- Distortion simulation (1)
- Duplex (1)
- Duplex stainless steels (1)
- Duplex steels (1)
- EBSD (1)
- Economic wide technology replacement (1)
- Efficient modelling (1)
- Eindringprüfung (1)
- Einfluss auf Schweißeigenspannungen (1)
- Electro-thermomechnical model (1)
- Electrode geometry (1)
- Electromagnetic (1)
- Electromagnetic Force (1)
- Electromagnetic stirring (1)
- Electromagnetic supported degassing (1)
- Electromagnetic weld pool support system (1)
- Electromagnetic weld support system (1)
- Electron beam (1)
- Elektonenstrahlschweißen (1)
- Elektromagnetische Badstütze (1)
- Elektromagnetische Porenreduktion (1)
- Elektromagnetische Schmelzbadbeeinflussung (1)
- Elektromagnetische Schmelzbadsicherung (1)
- Elektromagnetische Schmelzbadstütze (1)
- Embedded electronics (1)
- End-crater (1)
- Energy input (1)
- Energy parameters of the arc (1)
- Environment (1)
- Environmental impact categories (1)
- Equivalent stress concentration factors (1)
- Equivalent volumetric heat source (1)
- Ermüdung (1)
- Externally loaded hot cracking test (1)
- Externally loaded test (1)
- FE simulation (1)
- FE-model (1)
- FEM study (1)
- Fatigue strength (1)
- Fatigue tests (1)
- Ferritic welding electrode (1)
- Ferromagnetic steel (1)
- Ferromagnetic steels (1)
- Fiber laser (1)
- Filler material distribution (1)
- Filler wire (1)
- Filler wire mixing (1)
- Fine-grained Steel (1)
- Finite Element Method (1)
- Finite element analysis (1)
- Finite element method (FEM) (1)
- Flange width (1)
- Flow pattern (1)
- Flüssigmetallversprödung (1)
- Forschungsdatenmanagement (1)
- Fresnel reflection (1)
- Friction spot welding (1)
- Full penetration welding (1)
- Functionally Graded Materials (1)
- Funktionally Graded Material (1)
- Fusion zone (1)
- Fusion zone profile (1)
- Fusion zone size (1)
- Fusion zone, nickel alloys (1)
- Fügequalität (1)
- Fügetechnologie (1)
- GMA surfacing (1)
- GMA welding (1)
- GTAW (1)
- Galvanized steel (1)
- Gap bridging (1)
- Gaps (1)
- Gas shielded arc welding (1)
- General analytical solutions (1)
- Gleeble (1)
- Gleeble experiments (1)
- Gleeble testing (1)
- Grade S960QL steel (1)
- Grain structure (1)
- Greenhouse gas mitigation (1)
- Greens function method (1)
- Großrohre (1)
- HSLA (1)
- Hardly separable problem (1)
- Hartmann effect (1)
- Heat Input (1)
- Heat Treatment (1)
- Heat flow (1)
- Heat input (1)
- Heat source models (1)
- Heat treatments (1)
- Heissrisse (1)
- Heißriss (1)
- Heißrissanfälligkeit (1)
- Heißrisse (1)
- Heißzug (1)
- High brightness (1)
- High power (1)
- High power laser (1)
- High power laser keyhole welding (1)
- High process speeds (1)
- High speed laser cladding (1)
- High strength steel (1)
- High strength steels (1)
- High-Power Welding (1)
- High-power Laserbeam Welding (1)
- High-power fibre laser (1)
- High-power laser (1)
- High-power laser beam (1)
- High-strength fine-grained steels (1)
- High-strength steel sheets (1)
- Highspeed-plasma-laser-cladding (1)
- Hochleistungslaserstrahlschweißen (1)
- Hochleistungsschweißen (1)
- Hohlprofilknoten (1)
- Hold time (1)
- Hot Cracks (1)
- Human health G. (1)
- Hybrid Laser-Arc Welding (1)
- Hybrid Part (1)
- Hybrid-laser-arc welding (1)
- Hybridprozesse (1)
- Hybridschweißen (1)
- Hydrostatic and arc pressure exceed the Laplace pressure (1)
- Imaging (1)
- Impact absorbed energy (1)
- Implementierung (1)
- Inconel 625 (1)
- Inconel 939 (1)
- Industrial and Manufacturing Engineering (1)
- Initial gap (1)
- Instumented indentation test (1)
- Integrated alignment features (1)
- Intensity of Restraint (1)
- Investigated materials (1)
- KI (1)
- Kaltzähe Stähle (1)
- Kerbspannungskonzept (1)
- Keyhole mode laser beam welding (1)
- Keyhole stability (1)
- Kl (1)
- Knotenweise Zwangsbedingungen (1)
- Körperschall (1)
- Künstliche Neuronale Netze (1)
- Künstliche neuronale Netze (1)
- LCA (1)
- LMD (1)
- LPA (1)
- LW (1)
- Lamé curves (1)
- Lamé curves approximation (1)
- Laser Beam Welding (1)
- Laser Metal Deposition (LMD) (1)
- Laser Metal Deposition; Laser Beam Welding; Duplex; Stainless Steel (1)
- Laser arc-hybrid welding (1)
- Laser beam welding under vacuum/reduced pressure (1)
- Laser beam weliding (1)
- Laser cutting (1)
- Laser dispersing (1)
- Laser keyhole welding (1)
- Laser melting (1)
- Laser metal deposition (LMD) (1)
- Laser metal fusion (1)
- Laser powder bed fusion (1)
- Laser powder-based directed energy deposition (1)
- Laser surfacing (1)
- Laser- und Lichtbogenenergie (1)
- Laser-Metal-Deposition (1)
- Laser-Pulver-Auftragschweißen (LPA) (1)
- Laser-Pulver-Auftragschweißen; Laserstrahlschweißen, Duplex, Pufferschichten (1)
- Laser-Pulver-Auftragsschweißen (1)
- Laser-beam welding, (1)
- Laser-hybrid welding (1)
- Laser-plasma hybrid (1)
- Laserdispergieren (1)
- Laserpulverauftragschweißen (1)
- Laserschweißen (1)
- Laserstrahl-(Hybrid)schweißen (1)
- Laserstrahl-MSG-Hybridschweißen (1)
- Laserstrahlquelle (1)
- Leichtbauprinzipien (1)
- Life Cycle Assessment (LCA) Fusion welding (1)
- Life Cycle Assessment (LCA) Impact categories (1)
- Life Cycle Assessment (LCA) Schweißprozesse (1)
- Life Cycle Assessment (LCA) Umweltwirkungen (1)
- Life cycle assessment (1)
- Life-cycle assessment (1)
- Lifetime (1)
- Lightweight principles (1)
- Liquation Cracking (1)
- Liquid Metal Embrittlement (LME) (1)
- Local fatigue spproaches (1)
- Lokale Effekte (1)
- Longitudinal weld (1)
- Lorentz force (1)
- Low Temperature Toughness (1)
- Low alloy steels (1)
- Low feed rates (1)
- Low heat input GMA welding (1)
- Low heat input Gma welding (1)
- Längsnahtschweißen (1)
- Lötrissigkeit (1)
- MAG Prozesssteuerung (1)
- MAG welding (1)
- MHD (1)
- MSG-Engspaltschweißen (1)
- Macro Processing (Joining, Welding) (1)
- Magnesium (1)
- Magnesium Alloy (1)
- Magnesium alloy (1)
- Magnetic bath support (1)
- Maintenance (1)
- Manganese (1)
- Marangoni flow (1)
- Maritime Components (1)
- Matching ferritic filler metal (1)
- Material modeling (1)
- Material ranking (1)
- Mechanical Properties (1)
- Mechanical properties of the joints (1)
- Mechanical property (1)
- Mechanical-technological properties (1)
- Mechanisch technologische Kennwerte (1)
- Metal forming tools (1)
- Metallic vapour plume (1)
- Microstructure Tensile strength (1)
- Misalignment of edges (1)
- Misalignment of the edges (1)
- Mittelrippendefekt (1)
- Model calibration (1)
- Model order reduction (1)
- Modellierung (1)
- Modified spray arc (1)
- Molten pool behaviour (1)
- Multi - physical modeling (1)
- Multi-attribute decision method (1)
- Multi-criteria decision support (1)
- Multi-materials joining (1)
- Multi-regional inputeoutput data (1)
- Multiple reflections (1)
- Narrow gap welding (1)
- Narrow-gap welding (1)
- Natural convection (1)
- Neural network (1)
- Neural networks (1)
- Ni-based austenitic filler metal (1)
- Ni-based austenitic welding electrode (1)
- Ni-based superalloy (1)
- NiCrBSi (1)
- Nickel-based superalloy (1)
- Nickelbasis-Superlegierungen (1)
- Notch stress approach (1)
- Novel metrology (1)
- Novel optical measurement (1)
- Numerical Simulation (1)
- Numerical analysis (1)
- Numerical simulations (1)
- Numerical welding simulation (1)
- Numerical welding simulations (1)
- Numerische ISmulation (1)
- Numerische Simulation (1)
- Offshore Windenergie (1)
- Offshore wind turbines (1)
- Open science (1)
- Open source (1)
- OpenScience (1)
- Optical measurement technique (1)
- Optical measurment technique (1)
- Optische Emissionsspektroskopie (OES) (1)
- PBF/LB-M (1)
- Partial penetration welding (1)
- Pearlitic microstructure (1)
- Pendelstrategie (1)
- Penetration depth (1)
- Phase field method (1)
- Phase transformation (1)
- Phänomenologisch (1)
- Pipe Welding (1)
- Pipe weld preparation (1)
- Pipeline steel X120 (1)
- Pipeline steel of grade X120 (1)
- Plane crystalization (1)
- Plasma cutting (1)
- Plasma-Transferred-Arc (1)
- Plasma-cut samples (1)
- Plasma-cutting (1)
- Plasma-transferred-arc (1)
- Plastic deformation (1)
- Plume heating (1)
- Pointwise constraints (1)
- Porosität (1)
- Post-weld heat treatment (1)
- Powder Analysis (1)
- Pre-weld Preparation (1)
- Precipitation hardening aluminum alloys (1)
- Preheatin (1)
- Process diagnostics and simulation (1)
- Process innovations (1)
- Profilvermessung (1)
- Proper generalized decomposition (1)
- Prozesskette (1)
- Prozessparametern (1)
- Prozesssimulation (1)
- Prozessüberwachung (1)
- Prüfverfahren (1)
- Pufferschichten (1)
- Pulsed laser beam welding (1)
- Pulverbettbasiert (1)
- Qualität (1)
- Rail tracks (1)
- Ray teacing (1)
- Ray tracing method (1)
- Ray-tracing (1)
- Ray-tracing methods (1)
- Recycling (1)
- Repair and overhaul (1)
- Repair welding (1)
- Research data management (1)
- Resistance Spot Welding (RSW) (1)
- Resource efficiency (1)
- Rissbildung (1)
- Rundnähte (1)
- SEP-1220-3 (1)
- SLM (1)
- SLM printed plasma torch (1)
- Schallemissionsanalyse (SEA) (1)
- Schutzgas (1)
- Schutzgasschweißen (1)
- Schweißeignung (1)
- Schweißen von kaltzähen Stählen (1)
- Schweißnahtgeometrie (1)
- Schweißprozesse (1)
- Schweißtechnik (1)
- Schweißunregelmäßigkeiten (1)
- Secondary heat source (1)
- Selektive-laser-melting (1)
- Self-restraint hot cracking (1)
- Self-restraint test (1)
- Sensor (1)
- Sensorik (1)
- Shielding gases (1)
- Ship building (1)
- Shipbuilding steel (1)
- Single-pass welding (1)
- Social life cycle assessment (SLCA) (1)
- Software (1)
- Solidification behaviour (1)
- Solidification craking (1)
- Spiralstrategie (1)
- Spurgröße (1)
- Stahl und Aluminium (1)
- Stainless steels (1)
- Steady-state weld pool (1)
- Steel (1)
- Steel and Al (1)
- Strain fields prediction (1)
- Strain measurement (1)
- Strain-rate (1)
- Stress-strain behavior (1)
- Super martensitic filler material (1)
- Superalloy (1)
- Superelliptic Lamé curves (1)
- Support structures (1)
- Surface cracks (1)
- Surface texturing (1)
- Sustainability assessment (1)
- TIG welding (1)
- TRIP (1)
- TRIP - transformation induced plasticity (1)
- Tandem Gas Metal Arc Welding (1)
- Tandem gas metal arc welding (1)
- Tandem welding (1)
- Technical crack detection (1)
- Temperature distribution (1)
- Temperaturentwicklung (1)
- Tensile performance (1)
- Tensile properties (1)
- Tensile resistance spot welding experiment (1)
- Tensile strength (1)
- Tensile tests (1)
- Texture (1)
- Thermal analysis (1)
- Thermal softening (1)
- Thermo physical simulation (1)
- Thermo-capillary convection (1)
- Thermo-fluid dynamics (1)
- Thermographie (1)
- Thermography (1)
- Thermomechanisch (1)
- Thick materials (1)
- Thick metal plate welding (1)
- Thick plate welding (1)
- Thick plates (1)
- Thick steel plates (1)
- Thick-Walled Steel (1)
- Thick-plate welding (1)
- Thick-walled Structures (1)
- Thin steel plates (1)
- Three-dimensional crystallization (1)
- Ti - 6Al - 4V (1)
- Titanium alloy (1)
- Toughness (1)
- Transformation induced plasticity (TRIP) (1)
- Tubular X-joints (1)
- Tubular joints (1)
- Tungsten carbide (1)
- Turbine blade (1)
- Turbine components (1)
- Turbine industry (1)
- Turbulence (1)
- Two-dimensional solidification (1)
- Two-run welding technique (1)
- Umwandlungsplastischen Konstante K (1)
- Untersuchung laserstrahlgeschweißter Verbindungen (1)
- V-notch impact toughness (1)
- Vacuum (1)
- Vakuum (1)
- Vapor recondensation (1)
- Vaporization (1)
- Variables influencing hot cracking (1)
- Verzug (1)
- Viscoplasticity (1)
- Volltransient (1)
- WEBAM (1)
- Wear resistance (1)
- Weld cracks (1)
- Weld end crater (1)
- Weld imperfections (1)
- Weld pool behavior (1)
- Weld pool geometry (1)
- Weld pool modeling (1)
- Weld pool shape approximation (1)
- Weld pool support (1)
- Weld root (1)
- Weld seam geometry (1)
- Weld specimens (1)
- Welding (1)
- Welding Current (1)
- Welding Simulation (1)
- Welding costs (1)
- Welding jig (1)
- Welding of AlMg3 (1)
- Welding parameter (1)
- Welding process selection (1)
- Welding process simulation (1)
- Welding residual stresses (1)
- Welding under external loading (1)
- Weldx (1)
- Werkstofffragen (1)
- Werkstoffranking (1)
- Widerstandpunktschweißen (1)
- Widerstandspressschweißen (1)
- Windkraftanlagen (1)
- Wineglass shape (1)
- Wire Electron Beam Additive Manufacturing (1)
- Wire feed laser beam welding (1)
- Wire-based additive manufacturing (1)
- Wärmenachbehandlung (1)
- X8Ni9 (1)
- YAG lasers (1)
- Zinc (1)
- Zinkbeschichtung (1)
- cryogenic steel (1)
- deposition welding (1)
- digital image correlation (1)
- dual phase steel (1)
- hardness (1)
- highspeed plasma laser cladding (1)
- hochfeste Stähle (1)
- laser energy distribution (1)
- laser hybrid welding (1)
- local effects (1)
- microstructure (1)
- quality assurance (1)
- selbstlernendes (1)
- sensitivity analysis (1)
- strength (1)
- tensile strength (1)
- thermal cycles (1)
- thick plate welding (1)
- vacuum (1)
- welding residual stresses (1)
- Äquivalente Spannungskonzentrationsfaktoren (1)
- Äquivalente Wärmequelle (1)
- Ökonomische und ökologische Vorteile (1)
- ГИДРОДИНАМИКА (1)
- КОНВЕКЦИЯ (1)
- ЛАЗЕРНАЯ СВАРКА (1)
- МЕТОД КОНЕЧНЫХ ЭЛЕМЕНТОВ (1)
- СВАРОЧНАЯ ВАННА (1)
- ТЕМПЕРАТУРНОЕ ПОЛЕ (1)
- ТЕПЛОПРОВОДНОСТЬ (1)
- ЧИСЛЕННОЕ МОДЕЛИРОВАНИЕ (1)
Organisationseinheit der BAM
- 9 Komponentensicherheit (241)
- 9.3 Schweißtechnische Fertigungsverfahren (237)
- 7 Bauwerkssicherheit (6)
- 7.2 Ingenieurbau (4)
- 9.6 Additive Fertigung metallischer Komponenten (3)
- 5 Werkstofftechnik (2)
- 5.2 Metallische Hochtemperaturwerkstoffe (2)
- 7.7 Modellierung und Simulation (2)
- 1 Analytische Chemie; Referenzmaterialien (1)
- 1.9 Chemische und optische Sensorik (1)
Eingeladener Vortrag
- nein (41)
A method of solving the thermo-fluid dynamics problem is presented, enabling the prediction of the shape and dimensions of the weld pool during keyhole laser welding of thick plates. It is shown that the rear weld pool boundary can be satisfactorily approximated by a set of superellipses (Lamé curves). The presence of a convex rear weld pool boundary in the mid-plane has been observed experimentally and reproduced numerically. It was shown that in this zone the concentration of liquating impurities increases and the local solidification temperature decreases, contributing to the susceptibility to hot cracking.
Despite the advances in hardware and software techniques, standard numerical methods fail in providing real-time simulations, especially for complex processes such as additive manufacturing applications. A real-time simulation enables process control through the combination of process monitoring and automated feedback, which increases the flexibility and quality of a process. Typically, before producing a whole additive manufacturing structure, a simplified experiment in the form of a beadon-plate experiment is performed to get a first insight into the process and to set parameters suitably. In this work, a reduced order model for the transient thermal problem of the bead-on-plate weld simulation is developed, allowing an efficient model calibration and control of the process. The proposed approach applies the proper generalized decomposition (PGD) method, a popular model order reduction technique, to decrease the computational effort of each model evaluation required multiple times in parameter estimation, control, and optimization. The welding torch is modeled by a moving heat source, which leads to difficulties separating space and time, a key ingredient in PGD simulations. A novel approach for separating space and time is applied and extended to 3D problems allowing the derivation of an efficient separated representation of the temperature.
The results are verified against a standard finite element model showing excellent agreement. The reduced order model is also leveraged in a Bayesian model parameter estimation setup, speeding up calibrations and ultimately leading to an optimized real-time simulation approach for welding experiment using synthetic as well as real measurement data.
In this contribution, we present a physically motivated heat source model for the numerical modeling of laser beam welding processes. Since the calibration of existing heat source models, such as the conic or Goldak model, is difficult, the representation of the heat source using so-called Lamé curves has been established, relying on prior Computational Fluid Dynamics (CFD) simulations.
Lamé curves, which describe the melting isotherm, are used in a subsequent finite-element (FE) simulation to define a moving Dirichlet boundary condition, which prescribes a constant temperature in the melt pool. As an alternative to this approach, we developed a physically motivated heat source model, which prescribes the heat input as a body load directly. The new model also relies on prior CFD simulations to identify the melting isotherm. We demonstrate numerical results of the new heat source model on boundary-value problems from the field of laser beam welding and compare it with the prior CFD simulation and the results of the Lamé curve model and experimental data.
Electromagnetic stirring is known to promote material flow, reduce porosity, uniform elements distribution, and refine grain in laser beam welding (LBW), which enhances the applicability of LBW in various industries. In this study, a phase-field model of dendrite growth in AA5754 Al alloy electromagnetic stirring laser beam welding was established. The model considered the thermal electromagnetic Lorentz force resulting from the interaction between the electric field generated by the Seebeck effect and the magnetic field, as well as the temperature gradient and solidification rate of the solidification interface obtained from the computational fluid dynamics electromagnetic stirring LBW model. The variation rules of dendrite growth with different magnetic parameters and effects are analyzed. Comprehensively, the magnetic field promotes the solidification rate, thus promoting interfacial instability and a large magnetic flux density leads to a faster interface instability. The solidification rate as well as the temperature gradient affect the growth rate, and the accelerated growth caused by the so lidification rate with a high frequency and a large magnetic flux density effectively inhibits the slow growth caused by the temperature gradient. The thermal electromagnetic Lorentz force is the main factor for the branch increment at low frequencies, while both thermal electromagnetic Lorentz force and temperature gradient in crease the number of branches at high frequencies. The calculated average branch numbers considering various factors in the stable stage under different magnetic parameters were consistent with the results of the scanning electron microscope tests.
Numerical and experimental assessment of liquid metal embrittlement in externally loaded spot welds
(2024)
Zinc-based surface coatings are widely applied with high-strength steels in automotive industry. Some of these base materials show an increased brittle cracking risk during loading. It is necessary to examine electrogalvanized and uncoated samples of a high strength steel susceptible to liquid metal embrittlement during spot welding with applied external load. Therefore, a newly developed tensile test method with a simultaneously applied spot weld is conducted. A fully coupled 3D electrical, thermal, metallurgical and mechanical finite element model depicting the resistant spot welding process combined with the tensile test conducted is mandatory to correct geometric influences of the sample geometry and provides insights into the sample’s time dependent local loading. With increasing external loads, the morphology of the brittle cracks formed is affected more than the crack depth. The validated finite element model applies newly developed damage indicators to predict and explain the liquid metal embrittlement cracking onset and development as well as even ductile failure.
A fundamental study of physical mechanisms of wineglass-shaped fusion zone profile in laser melting
(2024)
The fusion zone geometry in laser melting processes e.g., laser welding and laser-based additive manufacturing, of metallic materials has commonly a wineglass-shaped profile which is critical to the grain orientation and stress distribution. Hereby, we adopt for the first time a decoupling work through a combination of multi-physics modelling and experiments to reveal the fundamental mechanisms of this special morphology. Two physicsbased easy-to-use metal vapour models are proposed to consider the vapour’s momentum and thermal effects separately. It is found that the direct laser energy absorption and Marangoni shear stress which are widely hypothesised to dominate the wineglass-shape formation show only a minor influence. The additional heating from the metallic vapour plume rather than its momentum impact contributes predominantly to the enlarging of the molten pool top region, resulting directly in the formation of the wineglass-shaped fusion zone. The generality of the plume heating effect is also validated in two types of materials (steel and Al) in a wide range of parameters.
Beim Unterpulverschweißen sind die Prozessgeräusche ein Indikator für eine gute Fügequalität. Diese Beurteilung kann i.d.R. nur von einer erfahrenen Fachkraft durchgeführt werden. Eine kürzlich entwickelte künstliche Intelligenz kann automatisch das akustische Prozesssignal anhand vortrainierter Merkmale klassifizieren und die Fügequalität anhand des Geräuschs beurteilen. Der Algorithmus, einmal richtig trainiert, kann den Prüfaufwand beim Unterpulverschweißen deutlich reduzieren.
It is proposed to model the experimentally observed weld pool boundary with superellipses (Lamé curves) and to find the unknown parameters of the curves using optimization methods. It has been shown experimentally that during laser welding of austenitic stainless steel with a thickness of 2 mm at a speed of 20 mm/s, the rear weld pool part has a shape close to triangular which can be accurately approximated by a superellipse. Analytical dependences of the trajectory and growth rate of the crystal and its cross-sectional area on the geometry of the rear weld pool part are obtained.
The application of anti-corrosion coated, high-strength steels in the automotive industry has increased in recent years. In combination with various zinc-based surface coatings, liquid metal embrittlement cracking can be observed in some of these materials. A high-quality, crack-free spot-welded joint is essential to realize the lightweight potential of the materials. In this work, the LME susceptibility of different coatings, which will be determined by the crack length and the occurrence rate, will be investigated using a welding under external load setup. The uncoated specimens did not show any LME. EG, GI and GA showed significantly less LME than ZM coatings. The latter coatings showed much larger crack lengths than the EG, GI and GA coatings. Furthermore, two mechanisms regarding the LME occurrence rate were observed: the occurrence of LME in zinc–magnesium coatings was theorized to be driven by the material properties of the coatings, whereas the occurrence of LME at EG, GI and GA samples was forced mainly by the application of the external tensile load.
In the experimental setup of this work, the materials were exposed to unusually high mechanical loads (up to 80% of their yield strength) to evoke LME cracks.
Despite the advances in hardware and software techniques, standard numerical methods fail in providing real-time simulations, especially for complex processes such as additive manufacturing applications. A real-time simulation enables process control through the combination of process monitoring and automated feedback, which increases the flexibil- ity and quality of a process. Typically, before producing a whole additive manufacturing structure, a simplified experiment in form of a bead-on- plate experiment is performed to get a first insight into the process and to set parameters suitably. In this work, a reduced order model for the transient thermal problem of the bead-on-plate weld simulation is devel- oped, allowing an efficient model calibration and control of the process. The proposed approach applies the proper generalized decomposition (PGD) method, a popular model order reduction technique, to decrease the computational effort of each model evaluation required multiple times in parameter estimation, control and optimization. The welding torch is modeled by a moving heat source, which leads to difficulties separating space and time, a key ingredient in PGD simulations. A novel approach for separating space and time is applied and extended to 3D problems allowing the derivation of an efficient separated representation of the tem- perature. The results are verified against a standard finite element model showing excellent agreement. The reduced order model is also leveraged in a Bayesian model parameter estimation setup, speeding up calibrations and ultimately leading to an optimized real-time simulation approach for welding experiment using synthetic as well as real measurement data.
The effect of the oscillating metal vapor plume on the keyhole and molten pool behavior during the laser beam welding of AlMg3 aluminum alloys is investigated by experimental and numerical methods. The real-time height of the metal vapor plume is measured by high-speed camera observation. The obtained experimental results are used to evaluate the additional heating source and laser beam attenuation caused by the scattering and absorption based on the Beer–Lambert theory. Furthermore, the dynamic behavior of the metal vapor plume is incorporated into a 3D transient heat transfer and fluid flow model, coupled with the ray tracing method, for the laser beam welding of the AlMg3 alloy. It is found that additional heating resulting from the scattered and absorbed laser beam energy by the metal vapor plume significantly expands the shape of the molten pool on the top region. Moreover, the oscillating metal vapor plume caused the fluctuation of the high-temperature region in the molten pool. The probability of keyhole collapse at the bottom increases 17% due to the oscillating laser power induced by the laser beam attenuation. The internal interplay between the metal vapor plume, molten pool shape, and keyhole collapse is obtained. The developed model has been validated by experiments, which shows a good agreement.
Numerical study on the formation of a bulging region in partial penetration laser beam welding
(2023)
A transient three-dimensional thermo-fluid dynamics numerical model was developed to study the formation of a bulging region in partial penetration laser beam welding. The model accounts for the coupling between the fluid flow, the heat transfer, and the keyhole dynamics by considering the effects of multiple reflections and Fresnel absorption of the laser beam in the keyhole, the phase transitions during melting and evaporating, the thermo-capillary convection, the natural convection, and the phase-specific and temperature-dependent material properties up to the evaporation temperature. The validity of the model was backed up by experimentally obtained data, including the drilling time, the weld pool length, the local temperature history outside the weld pool, the process efficiency, and a range of metallographic crosssections.
The model was applied for the cases of partial penetration laser beam welding of 8 mm and 12 mm thick unalloyed steel sheets. The obtained experimental and numerical results reveal that the bulging region forms transiently depending on the penetration depth of the weld, showing a tendency to transition from a slight bulging to a fully developed bulging region between penetration depths of 6 mm and 9 mm, respectively.
A three-dimensional numerical model was developed to accurately predict the steady-state weld pool shape in full penetration laser beam welding. The model accounts for the coupling between the heat transfer and the fluid dynamics by considering the effects of solid/liquid phase transition, thermo-capillary convection, natural convection, and phase-specific and temperature-dependent material properties up to the evaporation temperature. A fixed right circular cone was utilized as a keyhole geometry to consider the heat absorbed from the laser beam. The model was used to analyze the influence of the thermodynamic activity of solutes and turbulence on the weld pool shape. A mesh sensitivity analysis was performed on a hybrid mesh combining hexahedral and tetrahedral elements. For the case of full penetration laser beam welding of 8 mm thick unalloyed steel sheets, the dependence of the weld pool shape on the surface-active element sulfur was found to be negligible. The analysis of the results showed that a laminar formulation is sufficient for accurately predicting the weld pool shape since the turbulence has a minor impact on the flow dynamics in the weld pool. The validity of the numerical results was backed up by experimental measurements and observations, including weld pool length, local temperature history, and a range of metallographic crosssections.
The contactless magnetohydrodynamic technology has been considered as a potential and promising method to improve the weld qualities of deep penetration laser beam welding. In this paper, numerical investigations are conducted to study the influence of the auxiliary oscillating magnetic field on the porosity suppression in laser beam welding of 5754 aluminum alloy. To obtain a deeper insight into the suppression mechanism, a three-dimensional transient multi-physical model is developed to calculate the heat transfer, fluid flow, keyhole dynamic, and magnetohydrodynamics. A ray tracing algorithm is employed to calculate the laser energy distribution on the keyhole wall. A time-averaged downward Lorentz force is produced by an oscillating magnetic field. This force acts in the molten pool, leading to a dominant downward flow motion in the longitudinal section, which blocks the bubble migration from the keyhole tip to the rear part of the molten pool. Therefore, the possibility for the bubbles to be captured by the solidification front is reduced. The electromagnetic expulsive force provides an additional upward escaping speed for the bubbles of 1 m/s ~ 5 m/s in the lower and middle region of the molten pool. The simulation results are in a good agreement with experimental measurements. Based on the results obtained in this study, a better understanding of the underlying physics in laser beam welding enhanced by an auxiliary oscillating magnetic field can be provided and thus the welding process can be further optimized reducing the porosity formation.
Numerical analysis of ultrasonic vibration enhanced friction stir welding of dissimilar Al/Mg alloys
(2023)
The ultrasonic vibration enhanced friction stir welding (UVeFSW) process has unique advantages in joining dissimilar Al/Mg alloys. While there are complex coupling mechanisms of multi-fields in the process, it is of great significance to model this process, to reveal the influence mechanism of ultrasonic vibration on the formation of Al/Mg joints.
In this study, the acoustic-plastic constitutive equation was established by considering the influence of both ultrasonic softening and residual hardening on the flow stress at different temperatures and strain rates. And the ultrasonic induced friction reduction (UiFR) effect on friction coefficient in different relative directions at the FSW tool-workpiece interface was quantitatively calculated and analyzed.
The Al/Mg UVeFSW process model was developed through introducing the above acoustic effects into the model of Al/Mg friction stir welding (FSW). The ultrasonic energy is stronger on the aluminum alloy side. In the stirred zone, there is the pattern distribution of ultrasonic sound pressure and energy. The heat generation at the tool-workpiece contact interface and viscous dissipation were reduced after applying ultrasonic vibra-tion. Due to the UiFR effect, the projection of friction coefficient and heat flux distributions at the tool-workpiece interface present a "deformed" butterfly shape. The calculated results show that ultrasonic vibra-tion enhanced the material flow and promoted the mixing of dissimilar materials.
The weld quality and the possible defect formation are directly determined by the weld pool shape and the thermo-fluid dynamics therein. In this paper, an untypical weld pool profile, i.e., elongated at its top and bottom but narrowed at the middle, is found experimentally and numerically in the wire feed laser beam welding. The detrimental influence of the weld pool narrowing on the element transport is analyzed and discussed. A magnetohydrodynamic technique is utilized to suppress the narrowing, aiming at a more homogenous element distribution. It is found that a low-temperature region is formed in the middle of the weld pool due to the interaction of the two dominant circulations from the top and bottom regions. The weld pool is significantly narrowed due to the untypical growth of the mushy zone in the low-temperature region, which results in a direct blocking effect on the downward flow and the premature solidification in the middle region. The Lorentz force produced by a transverse oscillating magnetic field shows the potential to change the flow pattern into a single-circulation type and the low-temperature-gradient region is mitigated.
Therefore, the downward transfer channel is widened, and its premature solidification is prevented. The numerical results are well validated by experimental measurements of metal/glass observation and X-ray fluorescence element mapping.
Through experimental observation and auxiliary numerical simulation, this investigation studies the different types of grain refinement of 5754 aluminum alloy laser beam welding by applying a transverse oscillating magnetic field. Scanning electron microscope results have proved that the application of a magnetic field can reduce the average crystal branch width and increase its number. The interaction between the induced eddy current generated by the Seebeck effect and the applied external magnetic field produces a Lorentz force, which is important for the increase of the number of crystal branches. Based on the theory of dendrite fragmentation and the magnetic field-induced branches increment, the grain size reduction caused by the magnetic field is studied. Furthermore, the effects of the magnetic field are analyzed by combining a phase field method model and simulations of nucleation and grain growth. The grain distribution and average grain size after welding verifies the reliability of the model. In addition, the introduction of a magnetic field can increase the number of periodic three-dimensional solidification patterns. In the intersection of two periods of solidification patterns, the metal can be re-melted and then re-solidified, which prevents the grains that have been solidified and formed previously from further growth and generates some small cellular grains in the new fusion line. The magnetic field increases the building frequency of these solidification structures and thus promotes this kind of grain refinement.
The effect of the oscillating metal vapor plume on the keyhole and molten pool behavior during the laser beam welding of AlMg3 aluminum alloys is investigated by the experimental and numerical method. The real-time height of the metal vapor plume is measured by high-speed camera observation. The obtained experimental results are used to evaluate the additional heating source and laser beam attenuation caused by the scattering and absorption based on the Beer-Lambert theory. Furthermore, the dynamic behavior of the metal vapor plume is incorporated into a 3D transient heat transfer and fluid flow model, coupled with the ray tracing method, for the laser beam welding of the AlMg3 alloy. It is found that the additional heating resulting from the scattered and absorbed laser beam energy by the metal vapor plume significantly expands the shape of the molten pool on the top region. Moreover, the oscillating metal vapor plume caused the fluctuation of the molten pool shape. The probability of keyhole collapse at the bottom increases significantly to 72% due to the oscillating laser power induced by the laser beam attenuation. The internal interplay between the metal vapor plume, molten pool shape, and the keyhole collapse are obtained. The developed model has been validated by the experiments, which shows a good agreement.
The strain field can reflect the initiation time of solidification cracks during the welding process. The traditional strain measurement is to first obtain the displacement field through digital image correlation (DIC) or optical flow and then calculate the strain field. The main disadvantage is that the calculation takes a long time, limiting its suitability to real-time applications. Recently, convolutional neural networks (CNNs) have made impressive achievements in computer vision.
To build a good prediction model, the network structure and dataset are two key factors. In this paper, we first create the training and test sets containing welding cracks using the controlled tensile weldability (CTW) test and obtain the real strain fields through the Lucas–Kanade algorithm. Then, two new networks using ResNet and DenseNet as encoders are developed for strain prediction, called StrainNetR and StrainNetD. The results show that the average endpoint error (AEE) of the two networks on our test set is about 0.04, close to the real strain value. The computation time could be reduced to the millisecond level, which would greatly improve efficiency.
A technique for calculating the main solidification parameters for a two-dimensional columnar crystal growth during complete penetration laser beam welding of thin steel sheets was developed. Given that the weld pool interface is described by Lamé curves (superellipses) within the horizontal plane of growth, general analytical solutions were derived for the geometry of the crystal axis and the corresponding growth rate and cross-sectional area of the crystal. A dimensionless analysis was performed to provide insights on the dependence of the solidification parameters on the shape and dimensions of the rear part of the weld pool boundary. The derived solutions were applied for the case of complete penetration laser beam keyhole welding of 2 mm thick 316L austenitic chromium-nickel steel sheets. It was shown that the reconstruction of the weld pool boundary with Lamé curves provides higher accuracy and flexibility compared to results obtained with elliptical functions. The validity of the proposed technique and the derived analytical solutions was backed up by a comparison of the obtained solutions to known analytical solutions and experimentally determined shapes and sizes of the crystals on the top surface of the sheet. The dimensions of the calculated crystal axis correlated well with the experimentally obtained results.