Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Erscheinungsjahr
Dokumenttyp
Sprache
- Englisch (129)
- Deutsch (82)
- Russisch (6)
- Italienisch (1)
- Mehrsprachig (1)
Referierte Publikation
- nein (219) (entfernen)
Schlagworte
- Laser beam welding (38)
- Solidification cracking (13)
- Additive Manufacturing (11)
- Additive manufacturing (11)
- Laserstrahlschweißen (11)
- Laser metal deposition (9)
- Additive Fertigung (8)
- Numerical simulation (8)
- DED (7)
- Inconel 718 (7)
- Weld pool shape (7)
- Widerstandspunktschweißen (7)
- Laser Metal Deposition (6)
- Laserhybridschweißen (6)
- Mechanical properties (6)
- Thick-walled steel (6)
- Directed Energy Deposition (5)
- Gründungsstrukturen (5)
- Hochfester Stahl (5)
- Hot cracking test (5)
- Hybrid Laser Arc Welding (5)
- Hybrid laser arc welding (5)
- Laser welding (5)
- Laser-Pulver-Auftragschweißen (5)
- AM (4)
- Critical strain (4)
- Elektromagnetische Schmelzbadunterstützung (4)
- Element transport (4)
- Endkrater (4)
- Hot cracking (4)
- Hybrid laser-arc welding (4)
- Laser hybrid welding (4)
- Liquid Metal Embrittlement (4)
- Numerical modeling (4)
- Offshore Windenergieanlagen (4)
- Porosity (4)
- Stainless Steel (4)
- Ti-6Al-4V (4)
- 316L (3)
- CTW-Test (3)
- Cryogenic steel (3)
- Deep penetration laser beam welding (3)
- Directed energy deposition (3)
- Electromagnetic Weld Pool Support (3)
- Electromagnetic weld pool support (3)
- Full Penetration (3)
- Heat treatment (3)
- High power laser beam welding (3)
- Künstliche Intelligenz (3)
- Laser implantation (3)
- Laserimplantation (3)
- Leichtbau (3)
- MSG-Schweißen (3)
- Magnetohydrodynamics (3)
- Microstructure (3)
- Numerical modelling (3)
- Resistance spot welding (3)
- Rundnaht (3)
- Thick Materials (3)
- Weld pool dynamics (3)
- AC weld pool support (2)
- AISI D2 (2)
- Auftragschweißen (2)
- Automatisierte Fertigung (2)
- Automatisierte schweißtechnische Fertigung (2)
- Bulging effect (2)
- Charpy impact toughness (2)
- Cladding parameter (2)
- Crystal branch development (2)
- Deep penetration (2)
- Defokussierung (2)
- Design of experiments (2)
- Digitalisierung (2)
- Directed Enery Deposition (2)
- Duplex stainless steel (2)
- Edge effects (2)
- Electromagnetic backing (2)
- Elektronenstrahlschweißen (2)
- End crater (2)
- FEM (2)
- FGM (2)
- Ferromagnetischer Stahl (2)
- Festigkeit (2)
- Friction stir welding (2)
- Gap bridgeability (2)
- Grain refinement (2)
- Heat conduction (2)
- Heißrissresistenz (2)
- Hybrid components (2)
- Hybrid welding (2)
- L-PBF (2)
- Laser Welding (2)
- Laser beam Welding (2)
- Laser cladding (2)
- Laser-Hybridschweißen (2)
- Laser-metal-deposition (2)
- Lichtbogensensorik (2)
- Lightweight concepts (2)
- Local critical strain (2)
- Magnetic field (2)
- Mathematical modeling (2)
- Melt pool dinamics (2)
- Molten pool dynamics (2)
- Moving mesh (2)
- Neuronales Netz (2)
- Numerical process simulation (2)
- Optical flow (2)
- PBF-LB/M (2)
- Partial penetration (2)
- Periodic solidification pattern (2)
- Pipe manufacturing (2)
- Pipeline (2)
- Process chain (2)
- Qualitätssicherung (2)
- Rissanfälligkeit (2)
- Schweißnahtbewertung (2)
- Schweißsimulation (2)
- Schweißstruktursimulation (2)
- Selective Laser Melting (2)
- Simulation (2)
- Single pass welding (2)
- Solidification (2)
- Superellipse (2)
- Surface structuring (2)
- Temperature behavior (2)
- TiB2 (2)
- Transient heat transfer (2)
- Ultrasonic vibration (2)
- Umweltwirkungen (2)
- Unterpulverschweißen (2)
- Verfahrensvergleich (2)
- WAAM (2)
- Weld defects (2)
- Weldability (2)
- Welding of aluminum (2)
- Welding of thick metal plates (2)
- Welding simulation (2)
- Welding thermal cycle (2)
- laser welding (2)
- Ökobilanzierung (2)
- Überlappbereich (2)
- 3D FE-simulation (1)
- 3D-FE-Simulation (1)
- 3DDruck (1)
- 9%Ni steel, (1)
- AC magnetic fields (1)
- AHSS (1)
- Additiv (1)
- Additive (1)
- Advanced High-Strength Steel (AHSS) (1)
- Advanced high strength steel (1)
- Advanced high strength steels (1)
- Al-Mg-Si-Legierungen (1)
- Al/Mg alloys (1)
- Alloy 247 (1)
- Aluminium (1)
- Aluminium-Druckguss (1)
- Analytical model (1)
- Arc sensor (1)
- Arc welding (1)
- Artificial neural network (1)
- Artungleiche Werkstoffe (1)
- As-shielded arc welding (1)
- Aufbaustrategie (1)
- Aufgelöste Tragstrukturen (1)
- Auftriebskräfte (1)
- Austenitic stainless steels (1)
- Austenitische Stähle (1)
- Automated welding (1)
- Automation (1)
- Automatisierte schweißtechniche Fertigung (1)
- Automatisierung (1)
- Automobilindustrie (1)
- Bead-on-plate welds (1)
- Bewegtes Gitter (1)
- Bionik (1)
- Build - up Strategy (1)
- Build direction (1)
- Build-up Orientation (1)
- Bulge effect (1)
- Bulge formation (1)
- Bulging (1)
- CFD-model (1)
- CO2 lasers (1)
- CTW test (1)
- Calculation time (1)
- Charpy V-notch tests (1)
- Cimensional Accuracy (1)
- Circumferential weld (1)
- Circumferential welds (1)
- Cold Cracking Test (1)
- Combined laser manufacturing (1)
- Condition monitoring (1)
- Contact element (1)
- Conventional Ni-based austenitic welding electrode (1)
- Corrosion (1)
- Crack (1)
- Cracking susceptibility (1)
- Cracking susceptibility of AHSS (1)
- Cracks in the HAZ (1)
- Critical strain rate (1)
- Cryogenic Steel (1)
- CuSn1 (1)
- DED-EB (1)
- DED-LB (1)
- DIC technique (1)
- Data preparation (1)
- Datenbankstruktur (1)
- Dickblech (1)
- Die-cast aluminum (1)
- Different welding position (1)
- Digital Image Correlation (1)
- Digital factory (1)
- Digitale Bildkorrelationstechnik (1)
- Direct Energy Deposition (1)
- Direct Laser Metal Deposition (1)
- Direct energy deposition (1)
- Directed Energy Depositio (1)
- Distortion (1)
- Distortion simulation (1)
- Duplex (1)
- Duplex AISI 2205 (1)
- Duplex stainless steels (1)
- EBAM (1)
- Edge quality (1)
- Efficient modelling (1)
- Eindringprüfung (1)
- Einfluss auf Schweißeigenspannungen (1)
- Electromagnetic influence (1)
- Electromagnetic support (1)
- Electromagnetic weld pool support system (1)
- Electromagnetic weld support system (1)
- Electron beam (1)
- Elektonenstrahlschweißen (1)
- Elektromagnetische Badstütze (1)
- Elektromagnetische Porenreduktion (1)
- Elektromagnetische Schmelzbadbeeinflussung (1)
- Elektromagnetische Schmelzbadsicherung (1)
- Elektromagnetische Schmelzbadstütze (1)
- Embedded electronics (1)
- End-crater (1)
- Energy parameters of the arc (1)
- Equivalent heat source (1)
- Equivalent volumetric heat source (1)
- Ermüdung (1)
- Externally loaded hot cracking test (1)
- Externally loaded test (1)
- FE simulation (1)
- FE-model (1)
- FEA (1)
- FEM study (1)
- Fatigue strength (1)
- Fatigue tests (1)
- Ferritic welding electrode (1)
- Filler material distribution (1)
- Filler wire (1)
- Fine-grained Steel (1)
- Finite Element Method (1)
- Finite element method (1)
- Flow pattern (1)
- Flüssigmetallinduzierte Rissbildung (1)
- Flüssigmetallversprödung (1)
- Forschungsdatenmanagement (1)
- Friction spot welding (1)
- Functionally Graded Materials (1)
- Funktionally Graded Material (1)
- Fügequalität (1)
- Fügetechnologie (1)
- GMAW (1)
- Gaps (1)
- Gas shielded arc welding (1)
- Gleeble (1)
- Greens function method (1)
- Großrohre (1)
- Hardness (1)
- Heat Input (1)
- Heat Treatment (1)
- Heat treatments (1)
- Heissrisse (1)
- Heißriss (1)
- Heißrissanfälligkeit (1)
- Heißrisse (1)
- Heißzug (1)
- High power laser (1)
- High power laser keyhole welding (1)
- High speed laser cladding (1)
- High strength steel (1)
- High-power fibre laser (1)
- High-power laser (1)
- High-strength fine-grained steels (1)
- Hochleistungslaserstrahlschweißen (1)
- Hochleistungsschweißen (1)
- Human health G. (1)
- Hybrid Part (1)
- Hybrid-laser-arc welding (1)
- Hybridprozesse (1)
- Hybridschweißen (1)
- Hydrostatic and arc pressure exceed the Laplace pressure (1)
- Implementierung (1)
- In situ strain (1)
- Industrial and Manufacturing Engineering (1)
- Initial gap (1)
- Intensity of Restraint (1)
- Investigated materials (1)
- KI (1)
- Kaltzähe Stähle (1)
- Keyhole collapse (1)
- Keyhole mode laser beam welding (1)
- Keyhole mode welding (1)
- Kl (1)
- Knotenweise Zwangsbedingungen (1)
- Körperschall (1)
- Künstliche Neuronale Netze (1)
- Künstliche neuronale Netze (1)
- LME (1)
- LPA (1)
- LW (1)
- Laser (1)
- Laser Beam Welding (1)
- Laser Metal Deposition (LMD) (1)
- Laser Metal Deposition; Laser Beam Welding; Duplex; Stainless Steel (1)
- Laser Powder Bed Fusion (1)
- Laser arc-hybrid welding (1)
- Laser beam welding under vacuum/reduced pressure (1)
- Laser dispersing (1)
- Laser energy distribution (1)
- Laser metal deposition (LMD) (1)
- Laser metal fusion (1)
- Laser powder bed fusion (1)
- Laser- und Lichtbogenenergie (1)
- Laser-Metal-Deposition (1)
- Laser-Pulver-Auftragschweißen (LPA) (1)
- Laser-Pulver-Auftragschweißen; Laserstrahlschweißen, Duplex, Pufferschichten (1)
- Laser-Pulver-Auftragsschweißen (1)
- Laser-beam welding, (1)
- Laser-hybrid welding (1)
- Laser-plasma hybrid (1)
- Laserdispergieren (1)
- Laserpulverauftragschweißen (1)
- Laserschweißen (1)
- Laserstrahl-(Hybrid)schweißen (1)
- Laserstrahl-MSG-Hybridschweißen (1)
- Laserstrahlquelle (1)
- Leichtbauprinzipien (1)
- Life Cycle Assessment (LCA) Fusion welding (1)
- Life Cycle Assessment (LCA) Impact categories (1)
- Life Cycle Assessment (LCA) Schweißprozesse (1)
- Life Cycle Assessment (LCA) Umweltwirkungen (1)
- Life cycle assessment (LCA) (1)
- Lightweight principles (1)
- Liquation Cracking (1)
- Liquid Metal Embrittlement (LME) (1)
- Liquid metal embrittlement (1)
- Local fatigue spproaches (1)
- Lokale Effekte (1)
- Longitudinal weld (1)
- Low Temperature Toughness (1)
- Längsnahtschweißen (1)
- Lötrissigkeit (1)
- MAG Prozesssteuerung (1)
- MSG-Engspaltschweißen (1)
- Macro Processing (Joining, Welding) (1)
- Magnesium (1)
- Magnetic bath support (1)
- Manganese (1)
- Maritime Components (1)
- Material ranking (1)
- Mechanical Properties (1)
- Mechanical properties of the joints (1)
- Mechanisch technologische Kennwerte (1)
- Metal forming tools (1)
- Misalignment of edges (1)
- Misalignment of the edges (1)
- Mittelrippendefekt (1)
- Modellierung (1)
- Modified spray arc (1)
- Molten pool behaviour (1)
- Multi - physical modeling (1)
- Multiple reflections (1)
- Narrow-gap welding (1)
- Neural network (1)
- Nickel (1)
- Nickel-based superalloy (1)
- Nickelbasis-Superlegierungen (1)
- Novel metrology (1)
- Novel optical measurement (1)
- Numerical Simulation (1)
- Numerische ISmulation (1)
- Numerische Simulation (1)
- Offshore Windenergie (1)
- Offshore wind turbines (1)
- OpenScience (1)
- Optical measurement (1)
- Optical measurement technique (1)
- Optische Emissionsspektroskopie (OES) (1)
- Oscillating magnetic field (1)
- Oscillating vapor plume (1)
- PBF/LB-M (1)
- Path planning (1)
- Pearlitic microstructure (1)
- Pendelstrategie (1)
- Penetration depth (1)
- Phänomenologisch (1)
- Pipeline steel X120 (1)
- Plane crystalization (1)
- Plasma-Transferred-Arc (1)
- Plasma-cut samples (1)
- Plasma-cutting (1)
- Plasma-transferred-arc (1)
- Pointwise constraints (1)
- Porosity reduction (1)
- Porosität (1)
- Powder Analysis (1)
- Pre-weld Preparation (1)
- Preheatin (1)
- Preheating (1)
- Process diagnostics and simulation (1)
- Process monitoring (1)
- Process simulation (1)
- Profilvermessung (1)
- Prozesskette (1)
- Prozessparametern (1)
- Prozesssimulation (1)
- Prozessüberwachung (1)
- Prüfverfahren (1)
- Pufferschichten (1)
- Pulsed laser beam welding (1)
- Pulverbettbasiert (1)
- Quality assurance (1)
- Qualität (1)
- RSW (1)
- Rail tracks (1)
- Ray tracing (1)
- Ray tracing method (1)
- Ray-tracing (1)
- Recycling (1)
- Refill friction stir spot welding (1)
- Repair welding (1)
- Resistance Spot Welding (RSW) (1)
- Resource efficiency (1)
- Rissbildung (1)
- Rundnähte (1)
- SEP-1220-3 (1)
- SLM (1)
- SLM printed plasma torch (1)
- SMAW (1)
- Schallemissionsanalyse (SEA) (1)
- Schutzgas (1)
- Schutzgasschweißen (1)
- Schweißeignung (1)
- Schweißen von kaltzähen Stählen (1)
- Schweißprozesse (1)
- Schweißtechnik (1)
- Schweißunregelmäßigkeiten (1)
- Seam geometry (1)
- Selektive-laser-melting (1)
- Self-restraint hot cracking (1)
- Self-restraint test (1)
- Sensorik (1)
- Shielding gases (1)
- Single-pass welding (1)
- Social life cycle assessment (SLCA) (1)
- Solidification behaviour (1)
- Solidification craking (1)
- Spiralstrategie (1)
- Spurgröße (1)
- Stahl und Aluminium (1)
- Steel (1)
- Strain measurement (1)
- Strain rate (1)
- Submerged arc welding (1)
- Superelliptic Lamé curves (1)
- Support structures (1)
- Surface texturing (1)
- TRIP (1)
- Technical crack detection (1)
- Temperaturentwicklung (1)
- Tensile performance (1)
- Tensile strength (1)
- Tensile tests (1)
- Testing method (1)
- Thermal cycles (1)
- Thermo-capillary convection (1)
- Thermo-fluid flow (1)
- Thermographie (1)
- Thermography (1)
- Thermomechanisch (1)
- Thick plate welding (1)
- Thick plates (1)
- Thick steel plates (1)
- Thick-plate welding (1)
- Thick-walled Structures (1)
- Thin steel plates (1)
- Three-dimensional crystallization (1)
- Ti - 6Al - 4V (1)
- Tubular X-joints (1)
- Turbine blade (1)
- Turbine industry (1)
- Turbulence (1)
- Umwandlungsplastischen Konstante K (1)
- Untersuchung laserstrahlgeschweißter Verbindungen (1)
- V-notch impact toughness (1)
- Vakuum (1)
- Vaporization (1)
- Variables influencing hot cracking (1)
- Verzug (1)
- Volltransient (1)
- WEBAM (1)
- Weld cracks (1)
- Weld imperfections (1)
- Weld pool (1)
- Weld pool geometry (1)
- Weld pool modeling (1)
- Weld pool shape approximation (1)
- Weld specimens (1)
- Welding Current (1)
- Welding Simulation (1)
- Welding jig (1)
- Welding of AlMg3 (1)
- Welding under external loading (1)
- Werkstofffragen (1)
- Werkstoffranking (1)
- Widerstandpunktschweißen (1)
- Widerstandspressschweißen (1)
- Windkraftanlagen (1)
- Wire Electron Beam Additive Manufacturing (1)
- Wire electron beam additive manufacturing (1)
- Wärmenachbehandlung (1)
- X8Ni9 (1)
- YAG lasers (1)
- Zinc coated steel (1)
- Zink (1)
- Zinkbeschichtung (1)
- cryogenic steel (1)
- deposition welding (1)
- hardness (1)
- highspeed plasma laser cladding (1)
- hochfeste Stähle (1)
- laser energy distribution (1)
- laser hybrid welding (1)
- local effects (1)
- microstructure (1)
- quality assurance (1)
- resistance spot welding (1)
- selbstlernendes (1)
- strength (1)
- tensile strength (1)
- thermal cycles (1)
- thick plate welding (1)
- vacuum (1)
- Äquivalente Wärmequelle (1)
- Ökonomische und ökologische Vorteile (1)
- ГИДРОДИНАМИКА (1)
- КОНВЕКЦИЯ (1)
- ЛАЗЕРНАЯ СВАРКА (1)
- МЕТОД КОНЕЧНЫХ ЭЛЕМЕНТОВ (1)
- СВАРОЧНАЯ ВАННА (1)
- ТЕМПЕРАТУРНОЕ ПОЛЕ (1)
- ТЕПЛОПРОВОДНОСТЬ (1)
- ЧИСЛЕННОЕ МОДЕЛИРОВАНИЕ (1)
Organisationseinheit der BAM
- 9 Komponentensicherheit (152)
- 9.3 Schweißtechnische Fertigungsverfahren (148)
- 7 Bauwerkssicherheit (5)
- 7.2 Ingenieurbau (4)
- 9.6 Additive Fertigung metallischer Komponenten (3)
- 1 Analytische Chemie; Referenzmaterialien (1)
- 1.9 Chemische und optische Sensorik (1)
- 7.7 Modellierung und Simulation (1)
- 8 Zerstörungsfreie Prüfung (1)
- 8.0 Abteilungsleitung und andere (1)
- 8.1 Sensorik, mess- und prüftechnische Verfahren (1)
- 9.0 Abteilungsleitung und andere (1)
Eingeladener Vortrag
- nein (41)
In the last decade, high-strength fine grained steels and welding consumables have gained a strong raise of application ranging from mobile cranes to bridge constructions. However, the cracking susceptibility of these steels increases significantly in correspondence with the achieved improvements in yield strength and the loss in plastic deformation reserves.
In order to determine this behavior a series of different standardized cold cracking tests has been developed. One remaining major problem of these tests is the uncertainty about the quantitative intensity of the restraint conditions as well as the corresponding welding residual stresses.
Consequently, the comparison of different tests and welding conditions as well as the transferability of the results onto real parts is difficult at best. The main topic of this paper is the analysis of the restraint conditions and their link with the welding induced residual stresses. The importance of the given standardized selfrestrained tests and first results about the transferability of
results onto real parts are discussed. The influence of the test specimen geometry on the restraint conditions of the test is investigated for a selected test with numerical Simulation using commercial FEA software. Additionally, the residual stresses caused by the welding process are measured and linked with the restraint conditions which are defined mainly by the geometry parameters.
Finally the transferability of the selected cold cracking test results is validated experimentally. The test results of a multilayer weld on high-strength fine grained steel of real size weldments are investigated. For these experiments a 16 MN large scale testing facility is used which is capable of applying the high reaction forces and clamping conditions found at large scale demonstrator parts.
The results show the importance of the quantitative knowledge of the restraint conditions and the welding residual stresses on the cold cracking resistance.
Ultrasonic vibration enhanced friction stir welding (UVeFSW) is a recent modification of conventional friction stir welding (FSW), which transmits ultrasonic vibration directly into the localized area of the workpiece near and ahead of the rotating tool. In this study, a high strength aluminium alloy (2024-T4) was welded by this process and conventional FSW, respectively. Then tensile tests, microhardness tests and fracture surface analysis were performed successively on the welding samples. The tests results reveal that ultrasonic vibration can improve the tensile strength and the elongation of welded joints. The microhardness of the stir zone also increases.
Mechanische Eigenschaften der laserhybridgeschweißten Schweißverbindungen von hochfesten niedriglegierten Stählen erfüllen die Anforderungen der geltenden Normen
Eindringtiefe des Zusatzwerkstoff bis ca. 12 mm
Halborbitales Schweißen an 36” Rohren mit einer Wandstärke von 16 mm bei einer Schweißgeschwindigkeit von bis zu 2,2 m/min und Laserleistung von 19 kW technisch möglich
Rissfreie Schweißverbindungen an Präzisionsrohren können durch eine geeignete Schweißparameterauswahl mittels Laser-Hybridverfahren hergestellt werden
The influence of two different weld imperfections (gap/crack) on the fatigue behaviour of spot welded joints was tested
Surface cracks havenoinfluenceon thefatiguelife
Samples with cracks in the electrode indentation /HAZ where tested
Stiffness curves are not significantly influenced by surface cracks
3D FE-Simulation demonstrate no changes of stress due to surface imperfections
Drop-out of molten material was avoided by EM pressure
Compensation of the hydrostatic pressure of up to 20 mm thick
aluminum and stainless steel (experiment and FEM)
Mitigation of the weld bead dynamics
Significant changes in the velocity distributions in the weld pool
Weld pool geometry shape changes due to Hartmann effect
Significant porosity reduction
Surface quality improvements
Drop-out of molten material was avoided by EM pressure
Compensation of the hydrostatic pressure of up to 20 mm thick
aluminum and stainless steel (experiment and FEM)
Mitigation of the weld bead dynamics
Significant changes in the velocity distributions in the weld pool
Weld pool geometry shape changes due to Hartmann effect
Significant porosity reduction
Surface quality improvements
Solidification cracking phenomena taking place under Controlled Tensile Weldability (CTW) test conditions have already been investigated both experimentally and numerically via FEA in order to get a better understanding of the mechanisms of hot crack formation during laser beam welding of austenitic steel grades. This paper develops a three dimensional finite element model employing the contact elements technique to simulate the formation and propagation of solidification cracks during laser full penetration welding of fully austenitic stainless steel 1.4376. During the experimental procedure the resulting strain and displacement directed to the laser beam in the Close vicinity of the weld pool was measured at the surface of the workpiece using a Digital Image Correlation (DIC) technique with an external diode laser as an illuminating source. Local strain fields, global loads and crack lengths predicted by the model are in good Agreement with those observed in experiments.
Laser welding is a widely established manufacturing process in many industry sectors. Solidification cracking represents one of the most inadequately solved problems in welding and has major economic implications. The avoidance of hot crack forms for most fusion welding processes poses a key challenge for an important range of metallic construction materials and affects not only the manufacturers of welding equipment and material manufacturers, but also a large number of customers using welding technologies, as well as welding technical standardization and research. Solidification cracking susceptibility was examined with the help of the Controlled Tensile Weldability Test (CTW) developed by Federal Institute for Materials Research and Testing (BAM), Berlin. The test is based on the fact that hot crack formation depends on a critical strain that emerges within a critical temperature range, the so called brittle temperature range (BTR). Using this test and defined investigation programme a centreline solidification crack was generated. By controlling the applied strain during the laser beam welding process, it was possible to determine the critical strain and strain rate that led to solidification cracking formation. The hot cracking susceptibility of the tested stainless steels was qualified and quantified. The results demonstrate that the crack length increases with increasing applied strain. Furthermore, the strain rate has a significant influence on the formation of the solidification crack.
Laser welding is a widely established manufacturing process in many industry sectors. Solidification cracking represents one of the most inadequately solved problems in welding and has major economic implications. The avoidance of hot crack is for most fusion welding processes a key challenge for an important range of metallic construction materials and affects not only the manufacturers of welding equipment and material manufacturers, but also a large number of customers using welding technologies, as well as welding standardization and research. In this study a new investigation programme has been developed to qualify the hot cracking susceptibility of a variety of austenitic stainless steels. The results show the possibility of using this technique to determinate the critical values that occur with initiation of solidification cracking during laser beam welding
The numerical simulations of high power laser keyhole welding at different welding positions are performed by using Volume-Of-Fluid (VOF) method. The main material is SS400. The multi-physics phenomenon is considered using several models, such as the heat flux of Gaussian heat source, the recoil pressure with Clausisus-Clapeyron equation, the Marangoni flow considering temperature gradient, the buoyancy force with Boussinesq approximation, the additional shear stress and heat source due to metallic vapor ejected through keyhole entrance, the bubble formation assumed as adiabatic bubble, and the multiple-reflection by solving proper discriminant, are used. To analyze the fluid flow pattern, the concept of streamline formed by reconstructing the value of the velocity vector is applied.
Partial and full penetration cases at different welding positions are considered. The welding position seems to have only a minor influence on bead formation characteristics in both cases. This is probably due to the fact that the recoil pressure has a major influence when compared to other driving forces. The flow characteristics and fluid velocity in weld pool are analyzed to compare the gravity direction effect at different welding positions. It is observed that the clockwise flow pattern is mainly formed by the recoil pressure on the keyhole surface in the case of partial penetration. The laser energy can't maintain the whole weld pool when the weld pool size becomes too large. And then the solidification starts from the middle part of weld pool and a necked weld pool shape is formed. In the full penetration welding, the weld pool flow patterns are affected by the leakage of laser power through the full penetration keyhole and also by surface tension. Furthermore, the numerical simulation of full penetration welding with AISI316L is also performed to analyze the effect of material properties. The weld bead shapes obtained by simulations were compared with the corresponding experimental results to confirm the validity of the process models adopted and the CFD simulation tool.
Build-up strategies for generating components of cylindrical shape with laser metal deposition
(2015)
Laser Metal Deposition LMD) as additive manufacturing process offers the potential to produce near net shape components. This reduces the amount of material and post-processing. The components are composed of individual layers. Already mall irregularities within a layer can add up over multiple layers and lead to error propagation. This paper deals with the issue of build-up strategies to minimize irregularities and prevent error propagation. Different travel paths and the influence of a changing starting point regarding to error propagation are discussed. Different deposition rates between core and peripheral area are detected and successfully compensated by adjusting the build-up sequence. Stainless steel and titanium alloy Ti-6Al-4V are used in the experiments. The results are intended to illustrate the potential of an adjusted build-up strategy and provide basic information on the way to an automated deposition process. This paper is of interest for engineers in industry or science using LMD as additive manufacturing process.
Laser-GMA-hybrid welding of longitudinally welded large-diameter pipes of grades API- X80/ X120
(2015)
Potentials of the hybrid laser arc welding processes were investigated regarding reliable production of longitudinal welds of high strength pipe steels X80 and X120
Hybrid laser arc welding of the root pass:
Significant reduction in the weld cross section – savings of filler material
Lower heat input into the base material - improvement of mechanical properties of the weld joint
The arc type does not have any influence on the character of dilution in the laser part of the hybrid weld
14 mm deep root face was considered as optimum. No penetration of the filler material could be detected beyond this depth limit
Metal powder filler wires, micro alloyed with Ni and partly with Cr and Mo, guaranteed sufficient Charpy impact toughness at low temperature for the both investigated materials:
Hybrid laser arc welding is a very efficient process for the root pass in multi-pass welding and opens a large technical and economic potential for the manufacture of large pipes
Experimental study and numerical simulation of hot crack formation for novel laser weldability test
(2015)
Hot cracking susceptibility in laser beam welding was assessed for several stainless steels by means of the CTW test
The strain rate has a significant influence on the formation of the hot crack
It was possible to determine the critical strain and strain rate that led to shot crack formation
A material ranking of hot cracking resistance could be made.A three-dimensional FEM using the contact element technique to simulate hot cracking during LBW under external load conditions was developed.
Good agreement between the strain field measured using the DIC technique and the simulation results
Susceptibility to hot cracking can be predicted by using FEM with the correct mechanical and thermo-physical material properties
Test procedure to characterize the cracking susceptibility of RSW-steels has been developed
During externally loaded test procedure all investigated steels (HDT780CD+Z100, HDT780C+ZE75/75, HX340LAD+Z100, HCT690TD+Z100) showed a cracking behavior
With increased specimen load, the crack length grows for the micro-alloyed-steel and TRIP-steel
Complex phase steels behavior during test procedure:
Crack length growth with increasing force could not be determined
The cracking susceptibility of electro-galvanized steels is less than hot-dip galvanized steels (in this case)
30
Experimental study and numerical simulation of hot crack formation for novel laser weldability test.
(2015)
Laser beam welding is a widely established manufacturing process in several industries. The solidification cracking seriously effecting the safety of welded joints could arise during the beam welding of stainless steels caused by high solidification rates. In this study the controlled tensile weldability test (CTW) was used to investigate the solidification cracking susceptibility the fully austenitic stainless steels CrMnNi (1.4376), CrNi (1.4301), CrNiMo (1.4404) and CrNiSi (1.4828) during laser beam welding. The test facility allows welding of specimens with simultaneous application of tensile load along or cross to the welding direction while the speed of tensile force application is either constant or increases linearly. The tensile force increment and/or the displacement are set by means of a CNC controller. Trials were conducted by varying the ultimate tensile strain and cross-head speed while keeping the welding parameters constant. By observing the crack-no crack behaviour and estimating the generated crack length for each trail using a new optimized experimental procedure the influence of the two important conditions (the strain and the strain rate) for the formation of solidification cracks can be investigated, the critical values of strain and strain rate that are responsible for solidification cracking formation have been determined. In the present study a three-dimensional FEM using the contact element technique was developed to simulate the solidification cracking during laser full penetration welding under external load conditions for the steel 1.4376 in order to get a better understanding of the mechanisms of hot crack initiation and the theoretical results were compared to the experimental ones. By comparing the resulting solidification crack with simulated crack, it is possible to determine the critical condition of solidification crack formation in the region where the strains and the strain rates cannot be measured due to the high temperature. The results show a good agreement between numerical calculation and experiment. It is proposed that the solidification cracking susceptibility may be predicted by FEM analysis by using the correct mechanical and thermo-physical constants of the materials.
Das Laser-MSG-Hybridschweißverfahren führt bei untersuchten hochfesten Pipelinestählen API X80 und X120 reproduzierbar zu Schweißverbindungen mit anforderungsgerechten Zähigkeitseigenschaften.
Eine metallurgische Beeinflussung der Schweißnahtzähigkeit ist durch eine gezielte Auswahl des Zusatzwerkstoffes möglich, wobei die maximale Eindringtiefe des Zusatzwerkstoffes in die Tiefe der Laserhybridnaht zu beachten ist.
Die maximal erzielbare Eindringtiefe des Zusatzwerkstoffes ist auf ca. 14 mm begrenzt. Die eingesetzte Art des MSG-Lichtbogens hatte keinen erkennbaren Einfluss auf die Aufmischung im Laseranteil der Laserhybridnaht.
Die besseren Ergebnisse der Kerbschlagzähigkeit konnten mit Metallpulverdrähten erreicht werden.
Mit den erzielten gemittelten Werten der Schlagarbeit: ca. 200 J bei -60°C für X80 und ca. 53 J bei -40°C für X120 werden Anforderungen der Norm API 5L und DIN EN 10208-2 für die beiden untersuchten Grundwerkstoffe erfüllt.
Full penetration high power bead-on-plate laser beam welding tests of up to 20 mm thick 2205 duplex steel plates were performed in PA position. A contactless inductive electromagnetic (EM) weld pool support system was used to prevent gravity drop-out of the melt. Welding experiments with 15 mm thick plates were carried out using IPG fiber laser YLR 20000 and Yb:YAG thin disk laser TruDisk 16002. The laser power needed to achieve a full penetration was found to be 10.9 and 8.56kW for welding velocity of 1.0 and 0.5 m min(-1), respectively. Reference welds without weld pool support demonstrate excessive root sag. The optimal value of the alternating current (AC) power needed to completely compensate the sagging on the root side was found to be approximate to 1.6 kW for both values of the welding velocity. The same EM weld pool support system was used in welding tests with 20 mm thick plates. The laser beam power (TRUMPF Yb:YAG thin disk laser TruDisk 16002) needed to reach a full penetration for 0.5 m min(-1) was found to be 13.9 kW. Full penetration welding without EM weld pool support is not possible-the surface tension cannot stop the gravity drop-out of the melt. The AC power needed to completely compensate the gravity was found to be 2 kW. (C) 2016 Laser Institute of America
An electromagnetic weld pool support system for 20 mm thick duplex stainless steel AISI 2205 was investigated numerically and compared to experiments. In our former publications, it was shown how an AC magnetic field below the process zone directed perpendicular to the welding direction can induce vertically directed Lorentz forces. These can counteract the gravitational forces and allow for a suppression of material drop-out for austenitic stainless steels and aluminum alloys. In this investigation, we additionally adopted a steady-state complex magnetic permeability model for the consideration of the magnetic hysteresis behavior due to the ferritic characteristics of the material. The model was calibrated against the Jiles-Atherton model. The material model was also successfully tested against an experimental configuration before welding with a 30 mm diameter cylinder of austenitic stainless steel surrounded by duplex stainless steel. Thereby, the effects of the Curie temperature on the magnetic characteristics in the vicinity of the later welding zone were simulated. The welding process was modelled with a 3D turbulent steady-state model including heat transfer and fluid dynamics as well as the electromagnetic field equations. Main physical effects, the thermo-capillary (Marangoni) convection at the weld pool boundaries, the natural convection due to gravity as well as latent heat of solid–liquid phase transitions at the phase boundaries were accounted for in the model. The feedback of the electromagnetic forces on the weld pool was described in terms of the electromagneticinduced pressure. The FE software COMSOL Multiphysics 4.2 was used in this investigation. It is shown that the gravity drop-out associated with the welding of 20 mm thick duplex stainless steel plates due to the hydrostatic pressure can be prevented by the application of AC magnetic fields between around 70 mT and 90 mT. The corresponding oscillation frequencies were between 1 kHz and 10 kHz and the electromagnetic AC powers were between 1 kW and 2.3 kW. In the experiments, values of the electromagnetic AC power between 1.6 kW and 2.4 kW at oscillation frequencies between 1.2 kHz and 2.5 kHz were found to be optimal to avoid melt sagging or drop-out of melt in single pass fullpenetration laser beam welding of 15 mm and 20 mm thick AISI 2205.
Heat treated 9%Ni steel is considered the most suitable and economic material for construction of large-size liquefied natural gas (LNG) storage tanks which operate at cryogenic temperatures (-196°C). Strength above 700 MPa as well as a minimum impact value of 60 J are required to ensure reliable operation of the LNG tanks at operating temperature. Conventional arc welding processes, including shielded metal arc welding, gas metal arc welding, gas tungsten arc welding and submerged arc welding, are currently used in construction of LNG tanks. Ni based filler wire is the preferred filler metal of choice in LNG tank construction. The main problem with this choice is the lower mechanical properties, particularly tensile strength of the weld metal. To compensate, the wall thickness needs to be excessively thick to ensure the strength of the welded structures. Ni based filler material is expensive and a large quantity is needed to fill the multi-pass weld grooves. These factors significantly add to the cost in the fabrication of LNG storage tanks. For these reasons, exploration of new welding technologies is a priority. A big potential can be seen in laser based welding techniques. Laser beam welding results in much smaller fusion zone with chemical composition and mechanical properties similar to that of the base material. Laser welding is a much faster process and allows for a joint geometry which requires less filler material and fewer welding passes. The advantages of laser welding can help to overcome the problems pointed out above. Trials of autogenous laser welding, laser cold-wire welding and hybrid laser-arc welding conducted on the 9%Ni steel are presented in this paper. Chemical composition of the weld metal as well as effects of welding parameters on the weld formation, microstructure and tensile strength is discussed. Filler wire penetration depth as well as character of its distribution in the narrow laser welds was examined using EPMA - electron probe microanalysis.
Die stetig zunehmenden Anforderungen an Kraftstoffverbrauch, Schadstoffemission, sowie passive Sicherheit haben die Automobilindustrie vor Herausforderungen gestellt, die nur durch einen konsequenten Einsatz moderner hochfester Stahlwerkstoffe zu bewältigen sind. Obgleich eine generelle Eignung dieser Stähle für das Widerstandspunktschweißen (WPS) gegeben ist, kann es durch verschiedene externe Einflüsse im betrieblichen Umfeld zur Rissbildung in der Schweißverbindung kommen. Der Einfluss dieser Risse auf die mechanischen Eigenschaften ist derzeit nicht hinreichend genau erfasst, so dass häufig die Vorgabe einer rissfreien Schweißverbindung besteht. Die Kenntnis der Rissanfälligkeit der verarbeiteten Materialkombinationen sowie von ungünstigen Schweißparametern ist daher für viele Unternehmen von erheblicher wirtschaftlicher Bedeutung. Im Rahmen des FOSTA Projekts P921 „Entwicklung eines Verfahrens zur Bestimmung der Rissanfälligkeit von hochfesten Stählen beim Widerstandspunktschweißen“ wurde ein Ansatz zur Bestimmung der Rissanfälligkeit von WPS-Verbindungen hochfester Stähle entwickelt. Mittels einer hydraulischen Vorrichtung unter Zugbelastung wurden geschweißte, rissbehaftete Proben optisch ausgewertet. Das Verfahren ist geeignet, um ein Werkstoffranking bezüglich der Rissanfälligkeit beim Widerstandspunktschweißen für Werkstoffe aufzustellen.