Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Dokumenttyp
- Beitrag zu einem Tagungsband (190) (entfernen)
Schlagworte
- Laser beam welding (15)
- Additive Fertigung (14)
- Additive Manufacturing (14)
- Eigenspannungen (11)
- Hydrogen (10)
- Wear (9)
- Additive manufacturing (8)
- MAG-Schweißen (8)
- Niobium carbide (8)
- Wasserstoff (8)
- Friction (7)
- Hochfester Stahl (7)
- Schweißen (7)
- Laser powder bed fusion (6)
- Numerical simulation (6)
- Tribology (6)
- Welding (6)
- AM (5)
- DED (5)
- Laserimplantation (5)
- Laserstrahlschweißen (5)
- Solidification cracking (5)
- TiB2 (5)
- Ultraschallunterstütztes Fräsen (5)
- Diffusion (4)
- Digitalisation (4)
- Hochfester Feinkornbaustahl (4)
- Kaltrisssicherheit (4)
- Laser Metal Deposition (4)
- Mechanical properties (4)
- NbC (4)
- Numerical modeling (4)
- Residual stress (4)
- Weld pool shape (4)
- AISI D2 (3)
- AlSi10Mg (3)
- Characterisation (3)
- Deep penetration laser beam welding (3)
- Directed Energy Deposition (3)
- Fe3Al (3)
- Harmonisation (3)
- Inconel 718 (3)
- Kaltriss (3)
- Laser Powder Bed Fusion (3)
- Laser implantation (3)
- Legierungsmodifikation (3)
- Machining (3)
- Oberflächenintegrität (3)
- Porosity (3)
- Selective Laser Melting (3)
- Surface texturing (3)
- Thermography (3)
- UP-Schweißen (3)
- Werkzeugverschleiß (3)
- i-TRIBOMAT (3)
- 316L (2)
- Artungleiche Werkstoffe (2)
- Bruchmechanik (2)
- Bulging effect (2)
- Cobalt (2)
- Creep-resistant steel (2)
- Defokussierung (2)
- Dickblech (2)
- Directed Enery Deposition (2)
- Elektromagnetische Schmelzbadbeeinflussung (2)
- Elektromagnetische Schmelzbadunterstützung (2)
- Elektronenstrahlschweißen (2)
- Element transport (2)
- Endkrater (2)
- FGM (2)
- Fail-safe (2)
- Forschung (2)
- Fracture mechanics (2)
- Fracture toughness (2)
- Fügetechnologie (2)
- Gefügedegradation (2)
- Hardness (2)
- Heat treatment (2)
- Heißrisse (2)
- High-entropy alloy (2)
- Hybrid Laser Arc Welding (2)
- Hybrid components (2)
- Implant-Test (2)
- Infrared thermography (2)
- Interlaboratory tests (2)
- Kaltrisse (2)
- Kaltrissprüfung (2)
- L-PBF (2)
- Large-scale test (2)
- Laser metal deposition (2)
- Laser welding (2)
- Laser-Hybridschweißen (2)
- Laser-Pulver-Auftragschweißen (2)
- Laserhybridschweißen (2)
- Magnetohydrodynamics (2)
- Microstructure (2)
- Numerical Simulation (2)
- PEEK (2)
- Polymer materials (2)
- Presshärten (2)
- Reparatur (2)
- Residual stresses (2)
- Round robin tests (2)
- Rundnaht (2)
- Schweißnahtbewertung (2)
- Semi-finishing (2)
- Sintering (2)
- Spannungsrelaxationsriss (2)
- Stahl und Aluminium (2)
- Steel (2)
- Temperature (2)
- Tribologie (2)
- Turbine disk (2)
- Turning (2)
- WAAM (2)
- Weld pool dynamics (2)
- Windenergie (2)
- Wärmebehandlung (2)
- Wärmeführung (2)
- Wärmenachbehandlung (2)
- X38CrMoV5-3 (2)
- Überlappbereich (2)
- (U)HMWPE (1)
- 100Cr6 (1)
- 3D Druck (1)
- 3D printing (1)
- 9%Ni steel, (1)
- AISI 304L (1)
- Abrasion (1)
- Achsschenkel (1)
- Additive Manufacturing (AM) (1)
- Additive manufacturing (AM) (1)
- Aerosol measurements (1)
- Ageing (1)
- Aging (1)
- Al-Mg-Si-Legierungen (1)
- Al/Mg alloys (1)
- Alloy 247 (1)
- Alloy 36 (1)
- Alloy modification (1)
- Alternative Kraftstoffe (1)
- Alumina (1)
- Aluminium-Druckguss (1)
- Aluminum (1)
- Analytical model (1)
- Analytisches Modell (1)
- Anlagenbau (1)
- Atomic force microscopy (1)
- Auftragschweißen (1)
- Auftriebskräfte (1)
- Austenitic stainless steel (1)
- Bacteria (1)
- Bauteilbewertung (1)
- Bauteilprüfung (1)
- Bedarf (1)
- Bewegtes Gitter (1)
- Binder (1)
- Bruchmechanische Auslegung (1)
- Build direction (1)
- Build-up Orientation (1)
- Bulge formation (1)
- Burst (1)
- CASTOR-Behälter (1)
- CFD-model (1)
- CNG (1)
- Calculation time (1)
- Capability (1)
- Carbonitride (1)
- Cemented carbide (1)
- Cermet (1)
- Charpy impact toughness (1)
- Chunky graphite (1)
- Co (1)
- Coefficient of Friction (1)
- Cold Spray (1)
- Component assessment (1)
- Computer Aided Manufacturing (1)
- Constraint (1)
- Conventional Ni-based austenitic welding electrode (1)
- Coolant-free (1)
- Copper powder particles (1)
- Corrosion (1)
- Crack-closure (1)
- Crater wear (1)
- Critical strain (1)
- Cryogenic Steel (1)
- Cryogenic steel (1)
- Cryogenic temperature (1)
- Crystal branch development (1)
- CuSn1 (1)
- Cutting tool (1)
- Cutting tools (1)
- Cyclic R-curve (1)
- DED-EB (1)
- DLC (1)
- Data Integrity (1)
- Database (1)
- Datenbank (1)
- Dduplex stainless steel (1)
- Deep penetration (1)
- Diffraction (1)
- Digital (1)
- Digital Twin (1)
- Dilatometry (1)
- Direct Energy Deposition (1)
- Direct Laser Metal Deposition (1)
- Direct energy deposition (1)
- Directed energy deposition (1)
- Distortion simulation (1)
- Ductile cast iron (1)
- Durability (1)
- Dynamic fracture toughness (1)
- Dynamische Beanspruchung (1)
- EBAM (1)
- Edge effects (1)
- Effective crack propagation data (1)
- Efficient modelling (1)
- Eisenaluminid (1)
- Elastomers (1)
- Electrical conductivity (1)
- Electrochemical permeation (1)
- Electromagnetic Weld Pool Support (1)
- Electromagnetic forces (1)
- Electron beam (1)
- Elektonenstrahlschweißen (1)
- Elektromagnetische Porenreduktion (1)
- Elektromagnetische Schmelzbadsicherung (1)
- Elektromagnetische Schmelzbadstütze (1)
- End-crater (1)
- Equivalent heat source (1)
- Ersatzgeometrie (1)
- Europäisches Tribologie-Zentrum (1)
- Expansion joint (1)
- Experiment (1)
- Experimental procedure (1)
- FE-model (1)
- FEM (1)
- FSW (1)
- Fahrrad (1)
- Fatigue crack growth (1)
- Ferritic spheroidal graphite cast iron (1)
- Ferritic welding electrode (1)
- Ferromagnetischer Stahl (1)
- Filler material distribution (1)
- Flank (1)
- Force distance curve (1)
- Forschungsprojekt (1)
- Fraktographie (1)
- Frequenzanalyse (1)
- Fretting (1)
- Friction stir welding (1)
- Full Penetration (1)
- Fume (1)
- Functionally Graded Materials (1)
- Funktionally Graded Material (1)
- Fügequalität (1)
- Fügetechnik (1)
- Grain growth (1)
- Grain refinement (1)
- Green Deal (1)
- Gusseisen mit Kugelgraphit (1)
- HSLA steel (1)
- Hard metal (1)
- Hard tungsten (1)
- Hard-turning (1)
- Hardmetal (1)
- Hartstoffphasen (1)
- Haynes 282 (1)
- Heat accumulation (1)
- Heat conduction (1)
- Heat treatments (1)
- High Entropy Alloy (1)
- High entropy alloy (1)
- High power laser beam welding (1)
- High-resolution camera (1)
- High-strength steel (1)
- High-strength structural steels (1)
- Highspeed-plasma-laser-cladding (1)
- Hochentropie Legierung (1)
- Hochentropielegierung (1)
- Hochfest (1)
- Hochfeste Feinkornbaustähle (1)
- Hochleistungslaserstrahlschweißen (1)
- Hochleistungsschweißen (1)
- Holz-Holz-Kontakte (1)
- Holz-Stahl-Kontakte (1)
- Hot Cracks (1)
- Hot steam (1)
- Hot-Stamping (1)
- Hybrid Part (1)
- Hybrid laser arc welding (1)
- Hybrid laser-arc welding (1)
- Hybrid repair (1)
- Hybrid-laser-arc welding (1)
- Hydrogen Assisted Cracking (HAC) (1)
- Hydrogen concentration (1)
- Höherfester Feinkornbaustahl (1)
- IN718 (1)
- ISO 3690 (1)
- In situ measurement (1)
- In situ strain (1)
- In-situ Prozessüberwachung (1)
- In-situ monitoring (1)
- Inserts (1)
- Interoperability (1)
- Interrupted milling (1)
- Intrinsischer Schwellenwert gegen Ermüdungsrissausbreitung (1)
- Ionic liquid (1)
- Iron-based alloys (1)
- Irradiation (1)
- Joining dissimilar materials (1)
- Joint sealing (1)
- KI (1)
- Kerbschlagarbeit (1)
- Kerbschlagbiegeversuch, Untermaßproben, Normalproben, Skalierung von Ergebnissen (1)
- Keyhole collapse (1)
- Keyhole mode laser beam welding (1)
- Keyhole mode welding (1)
- Keyhole porosity (1)
- Knotenweise Zwangsbedingungen (1)
- Korrelation (1)
- Korrosionsschutz (1)
- Künstliche Intelligenz (1)
- Künstliche Neuronale Netze (1)
- LIBS (1)
- LIMS (1)
- LIPSS (1)
- LMD (1)
- LNG (1)
- LTT (1)
- LTT Weld Filler Materials (1)
- LW (1)
- Laboratory specimens (1)
- Large electrical high-voltage machine (1)
- Laser (1)
- Laser Metal Deposition; Laser Beam Welding; Duplex; Stainless Steel (1)
- Laser Powder Bed Fusion (L-PBF) (1)
- Laser Pulver Auftragsschweißen (1)
- Laser Welding (1)
- Laser beam melting (LBM) (1)
- Laser energy distribution (1)
- Laser metal deposition (LMD) (1)
- Laser- und Lichtbogenenergie (1)
- Laser-Pulver-Auftragschweißen (LPA) (1)
- Laser-Pulver-Auftragschweißen; Laserstrahlschweißen, Duplex, Pufferschichten (1)
- Laser-beam welding, (1)
- Laser-metal-deposition (1)
- Laser-plasma hybrid (1)
- Laserdispergieren (1)
- Laserpulverauftragschweißen (1)
- Laserstrahlschmelzen (1)
- Leakage Rate (1)
- Lebensdauer (1)
- Lichtbogensensorik (1)
- Liquation Cracking (1)
- Longitudinal Wave (1)
- Low Temperature Toughness (1)
- Lubricated sliding (1)
- Lubrication (1)
- MAG Prozesssteuerung (1)
- MSG-Engspaltschweißen (1)
- MSG-Schweißen (1)
- Machinability (1)
- Magnetic field (1)
- Maritime Components (1)
- Martensite (1)
- Master Curve (1)
- Master Curve-Konzept (1)
- Mechanisch technologische Kennwerte (1)
- Mediumentropie Legierung (1)
- Melt-pool-monitoring (1)
- Metal (1)
- Metal matrix composite (1)
- Methane (1)
- Minimum waiting time (1)
- Mischverbindung (1)
- Molten pool behaviour (1)
- Molten pool dynamics (1)
- Moving mesh (1)
- Multi - physical modeling (1)
- Multielement-Legierung (1)
- Multielementlegierungen (1)
- Multiple principal element alloy (1)
- Multispectral thermography (1)
- Neuronales Netz (1)
- Neutron diffraction (1)
- Neutron imaging (1)
- Nickel (1)
- Nickel-based superalloy (1)
- Nickelbasis-Superlegierungen (1)
- Numerical modelling (1)
- Numerical process simulation (1)
- Numerische ISmulation (1)
- Oberflächenmessung (1)
- Optical measurement (1)
- Optical tomography (1)
- Optische Emissionsspektroskopie (OES) (1)
- Oscillating magnetic field (1)
- Oscillating vapor plume (1)
- Overspeed (1)
- PAG (1)
- PBF-LB/M (1)
- PBF/LB-M (1)
- PTFE composites (1)
- Partial penetration (1)
- Particle gas emission (1)
- Path planning (1)
- Penetration depth (1)
- Performance testing (1)
- Periodic solidification pattern (1)
- Permeation (1)
- Phase transformation (1)
- Pipeline (1)
- Pipeline steel X120 (1)
- Pitting (1)
- Plasma (1)
- Plasma-Pulver-Auftragschweißen (1)
- Plasma-Transferred-Arc (1)
- Plasma-transferred-arc (1)
- Plume (1)
- Polymer composites (1)
- Polymerkomposite (1)
- Porosität (1)
- Position detection (1)
- Post Weld Heat Treatment (PWHT) (1)
- Powder Analysis (1)
- Pre-weld Preparation (1)
- Process Chain Integration (1)
- Process monitoring (1)
- Process parameter optimization (1)
- Process simulation (1)
- Profilvermessung (1)
- Properties (1)
- Prozesssimulation (1)
- Prüfverfahren (1)
- Quality Assurance (1)
- Quantification (1)
- Radioactive Waste (1)
- Ray tracing (1)
- Ray tracing method (1)
- Ray-tracing (1)
- Recognition (1)
- Recycling (1)
- Reheat cracking (1)
- Reibung (1)
- Reproducibility (1)
- Residual Stress (1)
- Residual Stresses (1)
- Restlebensdauer (1)
- Restraint (1)
- Ringversuch (1)
- Rissbildung in Stahl (1)
- Round robin (1)
- Rührreibschweißen (1)
- SHPB (1)
- SLM (1)
- SLM printed plasma torch (1)
- SMAW (1)
- SPS (1)
- SWIR camera (1)
- Scanning kelvin probe force microscopy (1)
- Schadensanalyse (1)
- Schadensprävention (1)
- Schadenstolerante Bauteilauslegung, (1)
- Schadenstolerante Bauteilauslegung, Restlebensdauer, intrinsischer Schwellenwert gegen Ermüdungsrissausbreitung (1)
- Schallemission (1)
- Schallemissionsanalyse (SEA) (1)
- Schweißeignung (1)
- Schweißen von kaltzähen Stählen (1)
- Schwingfestigkeit (1)
- Seal Behavior (1)
- Selective laser melting (1)
- Selective laser melting (SLM) (1)
- Sensorik (1)
- Slidng wear (1)
- Solidification (1)
- Solidification behaviour (1)
- Solidification craking (1)
- Solubility (1)
- Spatter (1)
- Speed of sound (1)
- Stahl (1)
- Stainless Steel (1)
- Statistische Versuchsplanung (1)
- Steel and aluminium (1)
- Stoßdämpfer (1)
- Strain rate (1)
- Stress Relief Cracking (SRC) (1)
- Stress corrosion cracking (1)
- Structural integrity (1)
- Structure (1)
- Struktur Integrität (1)
- Studie (1)
- Submerged arc welding (1)
- Superelliptic Lamé curves (1)
- Supermartensitic Stainless Steel (SMSS) (1)
- Surface integrity (1)
- Synchrotron (1)
- TEKKEN (1)
- TEKKEN-Test (1)
- TES (1)
- TIG welding (1)
- Temperature behavior (1)
- Temperature emissivity separation (1)
- Tensile performance (1)
- Tensile properties (1)
- Tensile strength (1)
- Thermal desorption analysis (1)
- Thermisches Ausfugen (1)
- Thermo-capillary convection (1)
- Thermo-fluid flow (1)
- Thermografie (1)
- Thermographie (1)
- Thick Materials (1)
- Thick-walled steel (1)
- TiAl64V (1)
- ToF-SIMS (1)
- Toughness (1)
- Transient heat transfer (1)
- Tribologische Daten (1)
- Trockenreibung (1)
- Tungsten carbide (1)
- Turbinenscheibe (1)
- Turbulence (1)
- Ultrasonic Transducer (1)
- Ultrasonic machining (1)
- Ultrasonic vibration (1)
- Ultrasonic-assisted milling (1)
- Varestraint-Test (1)
- Verschleißbeständigkeit (1)
- Vickers hardness (1)
- WAXD (1)
- WC (1)
- WEBAM (1)
- WIG (1)
- WRC 1992 diagram (1)
- Wear volume (1)
- Weld pool geometry (1)
- Weld pool shape approximation (1)
- Welding simulation (1)
- Werkstoff (1)
- Werkzeugmodifikation (1)
- Widerstandspunktschweißen (1)
- Wire Arc Additive Manufacturing (1)
- Wire Electron Beam Additive Manufacturing (1)
- Wire electron beam additive manufacturing (1)
- Wärmeakkumulation (1)
- X-ray diffraction (1)
- X8Ni9 (1)
- Zerspankräfte (1)
- Zwischenlagenzeit (1)
- carrier gas hot extraction (1)
- deposition welding (1)
- highspeed plasma laser cladding (1)
- keyhole dynamics (1)
- laser energy absorption (1)
- laser energy distribution (1)
- laser hybrid welding (1)
- miniature specimens; FCGR curves; intrinsic threshold (1)
- molten pool (1)
- numerical modeling (1)
- thermal cycles (1)
- thick plate welding (1)
- µCT-analysis (1)
- Äquivalente Wärmequelle (1)
- Öffentliche Sicherheit (1)
Organisationseinheit der BAM
- 9 Komponentensicherheit (190) (entfernen)
Paper des Monats
- ja (1)
Intermetallische Werkstoffe werden für Hochtemperaturanwendungen immer wichtiger. Insbesondere Aluminide mit hohen spezifischen Festigkeiten haben ein großes Potenzial für Leichtbauanwendungen, z. B. werden Titanaluminide bereits in Flugzeugturbinen eingesetzt. Ökonomische und ökologische Aspekte sind die treibende Kraft zur Substitution konventioneller Legierungen, z. B. Nickelbasislegierungen, die eine wesentlich höhere Kostenintensität und ein höheres Gewichts-Festigkeits-Verhältnis aufweisen. Insbesondere Eisenaluminide (FeAl) sind aufgrund guter mechanischer Eigenschaften und der guten Verfügbarkeit der wichtigsten Hauptlegierungselemente attraktiv. Speziell entwickelte FeAl-Legierungskonzepte ermöglichen eine wirtschaftliche Produktion im Kokillenguss, bei der die Erstarrung der Schmelze spezielle komplexe Gefüge ermöglicht, um die hohen thermischen und mechanischen Eigenschaften durch eine hohe Anzahl von harten Ausscheidungen entlang der Korngrenzen zu erreichen. Zu diesen Eigenschaften gehört aber auch, dass notwendige Bearbeitungsschritte, wie das Schlichtfräsen, zur Erzielung komplexer Endkonturen, zu vorzeitigem Werkzeugverschleiß und geringen Oberflächengüten führen. Für das finale FeAl-Bauteil ist eine hohe Oberflächenintegrität insbesondere in sicherheitsrelevanten Anwendungen in der Luftfahrt oder im Energiebereich erforderlich. Aus diesem Grund konzentriert sich die vorliegende Untersuchung auf die Mechanismen und die Minimierung des Werkzeugverschleißes und die Auswirkungen auf die Oberfläche eines in Kokille vergossenen FeAl-Bauteils. Neben den Optimierungen des Fräsprozesses und der Werkzeugparameter (Geometrie, Material) wird ein modernes hybrides Bearbeitungsverfahren, das ultra-schallunterstützte Fräsen (USAM), eingesetzt, bei dem eine Überlagerung mit einer hochfrequenten Schwingung des rotierenden Werkzeugs erzeugt wird. Analysen der Kräfte und Temperaturen im Fräsprozess, der Verschleißerscheinungen am Werkzeug und der Oberflächenintegrität zeigen positive Auswirkungen durch USAM. Darüber hinaus wird eine valide Grundlage für die Optimierung des Werkzeugs und des Fräsprozesses geschaffen, um eine hohe Oberflächenintegrität (z. B. Verringerung von Zugeigenspannungen und Defekten) und eine längere Werkzeuglebensdauer zu gewährleisten, die zukünftig eine wirtschaftliche Herstellung von FeAl-Bauteilen ermöglicht.
Hochfeste Feinkornbaustähle verfügen über großes Potenzial für gewichtsoptimierte, effiziente Strukturen in vielen modernen Stahlkonstruktion. Weitere Effizienzsteigerungen können durch additives Fertigen sowie bionische Bauweisen erreicht werden. Hochfeste Zusatzwerkstoffe für formgebendes MSG-Schweißen (engl.: Wire Arc Additive Manufacturing, WAAM) sind bereits von den Schweißzusatzherstellern lieferbar. Eine breite industrielle Anwendung insbesondere für KMU ist aufgrund fehlender quantitativer Erkenntnisse und Richtlinien bezüglich schweißbedingter Beanspruchungen und Bauteilsicherheit während der Herstellung und des Betriebs derzeit stark limitiert. In einem gemeinsamen Forschungsprojekt (FOSTA-P1380/IGF21162BG) der BAM und der TU Chemnitz werden daher die mit Eigenspannungsausbildung und der Gefahr einer Kaltrissbildung verbundenen prozess- und werkstoffbedingten sowie konstruktiven Einflüsse beim WAAM hochfester Stähle untersucht. Der vorliegende Beitrag fokussiert die Analyse der Auswirkungen von Schweißwärmeführung und Design der WAAM-Bauteile auf Nahtgeometrie, Materialausnutzung und Eigenspannungen. Hierfür werden geometrisch definierte Probenkörper (Hohlquader) vollautomatisiert mit einem speziellen, hochfesten WAAM-Massivdraht (Streckgrenze >790 MPa) geschweißt. Die Wärmeführung wird innerhalb eines statistischen Versuchsplans so variiert, dass die Dt8/5-Abkühlzeiten im empfohlenen Verarbeitungsbereich (ca. 5 s bis 20 s) liegen. Das WAAM-Schweißen komplexer Geometrien mit variierenden Schweißwärmeführungen und geometrischen Verhältnissen bzw. Wanddicken bedingt neben den Auswirkungen auf die Abkühlbedingungen, Abkühlzeiten und Gefüge deutliche Einflüsse auf die konstruktiven Steifigkeitsverhältnisse beim Schweißen. Es zeigen sich anhand der Schweißexperimente signifikante Auswirkungen durch Probenskalierung und Wärmeeinbringung auf die resultierenden lokalen Eigenspannungen. Die Folge können ungünstige Bauteileigenschaften und risskritische Zugeigenspannungen sein.
Die Verringerung der CO2-Emissionen ist eng mit der Entwicklung hocheffizienter und wirtschaftlicher Komponenten aus Stahl in der Anlagen- und Verfahrenstechnik verknüpft. Um den hohen kombinier-ten korrosiven, tribologischen, thermischen und mechanischen Beanspruchungen stand zu halten, werden auf Anwendungsfall und Stahlwerkstoff abgestimmte Verschleißschutzschichten eingesetzt. Neben der zunehmenden Forderung konventionelle Kobalt- durch Nickellegierungen zu ersetzen, wächst auch der Bedarf nach definierten Ober- bzw. Funktionsflächen hoher Güte. Aufgrund hohen Werkzeugverschleißes ist die erforderliche Fräsbearbeitung zu Herstellung der komplexen Geomet-rien der Bauteile für KMU oftmals wirtschaftlich nicht möglich. Mittels Legierungsmodifikation der Schweißzusätze für nickelbasierte plasmaauftraggeschweißte Verschleißschutzschichten und durch den Einsatz innovativer ultraschallunterstützter Fräsprozesse soll eine günstigere Zerspanbarkeit er-reicht werden, ohne das Verschleißschutzpotential zu mindern. Im vorliegenden Beitrag wird der Ein-fluss der mittels Legierungsmodifikation eingestellten Gefüge- und Ausscheidungsmorphologie auf die Zerspanbarkeit untersucht. Dies erfolgt anhand einer typischerweise für Schneckenmaschinen einge-setzten Verschleißschutzlegierung NiCrMoSiFeB-Legierung („Colmonoy 56 PTA“), die konventionelle CoCr-Legierungen (Stellite) substituiert. Metallurgische Untersuchungen und In-situ-Messungen auf-tretender Prozesskräfte an der Werkzeugschneide beim Fräsen sowie anschließende Untersuchungen von Werkzeugverschleiß und Oberflächenintegrität ermöglichen eine detaillierte Analyse und Korrela-tion zwischen mikrostrukturellen Eigenschaften und Zerspanbarkeit.
Die Wärmeverteilung des Lasers beim Laserstrahltiefschweißen ist für die Formgebung der Dampfkapillare und für die Schweißbaddynamik entscheidend. In dieser Arbeit werden die Laserwärmeverteilung und deren Einflüsse auf die Schweißbadtiefe sowie -breite numerisch anhand des Ray-Tracing-Verfahrens analysiert. Hierbei wird der La-serstrahl in mehreren Strahlenbündeln bzw. Subrays unterteilt. Diesbezüglich soll der Pfad der Subrays präzis be-rechnet werden, um die Dynamik der Dampfkapillare und des Schweißbades eines realen Schweißprozesses rich-tig abzubilden. Zu diesem Zweck beschäftigt sich die vorliegende Arbeit mit der Genauigkeitsverbesserung der Kontaktposition und der Reflexionsrichtung der Subrays auf der freien Oberfläche anhand der Level-Set-Methode. Um die Güte dieses Simulationsansatzes zu gewährleisten, wurde eine Gegenüberstellung mit den zwei klassischen Ray-Tracing-Verfahren mittels drei verschiedenen Benchmark-Testreihen durchgeführt. Anschließend wurden die Versuchsergebnisse zur Validierung der implementierten numerischen Ansätze verwendet. Im Rahmen dieser Arbeit kann es gezeigt werden, dass unterschiedliche Wärmeverteilung aufgrund der verschiedenen Ray-Tracing-Verfahren deutlich zu erkennen ist, welche wiederum die Schweißbaddynamik sowie die lokalisierte Dampfkapil-lardynamik stark beeinflussen. Ferner wurde es bestätigt, dass die implementierte Level-Set-Methode zu einer ge-naueren Ermittlung der Kontaktposition und der Reflexionsrichtung der Subrays und somit zu einer Verbesserung der simulierten Schmelzkontur führt.
Die Additive Fertigung gewinnt zunehmend an Bedeutung für die Verarbeitung von Kupferwerkstoffen im industriellen Umfeld. Hierbei wird verstärkt auf drahtförmige Ausgangswerkstoffe gesetzt, da diese Vorteile im Handling bieten, bereits aus der Schweißtechnik bekannt sind und sich zumeist durch geringere Beschaffungskosten auszeichnen. In den letzten Jahren entwickelte sich unter den drahtbasierten Verfahren der Directed-Energy-Deposition (DED) eine Prozessvariante unter Nutzung des Elektronenstrahls zur industriellen Marktreife. Dabei zeigt die Technologie Wire Electron Beam Additive Manufacturing (DED-EB) besondere Vorteile gegenüber anderen DED-Prozessen für die Anwendung an Kupfer. Um das Verfahren einem breiten Anwenderkreis in der Industrie zugänglich zu machen, fehlen jedoch Daten zu Leistungsfähigkeit, Prozessgrenzen und Anwendungsmöglichkeit- en. Die vorliegende Untersuchung beschäftigt sich mit dieser Problemstellung am Beispiel der Legierung CuSn1MnSi. Über mehrstufige Testschweißungen werden die physikalisch möglichen Prozessgrenzen ermittelt und Rückschlüsse über die Eignung der Parameter zum additiven Aufbau gezogen. An verschiedenen additiv gefertigten Probekörpern werden anschließend Kennwerte für Aufbaurate, Härte, Mikrostruktur, Oberflächenqualität sowie mechanische Festigkeitswerte ermittelt. Es zeigt sich, dass das die durch DED-EB hergestellten Proben, trotz des groben Gefüges sowie der thermischen Belastung im Aufbauprozess, in ihren Eigenschaften gut mit den Spezifikationen des Ausgangsmaterials übereinstimmen.
Um Bauteile vor Verschleiß und Korrosion zu schützen werden Beschichtungen aus resistenteren Materialien aufgetragen. Hierzu zählen unter anderen die Legierungen auf Cobalt-Chrom Basis. Der diskrete Materialsprung ist jedoch unter thermischen und mechanischen Belastungen häufig Ursache für das Versagen der Beschichtung. In dieser Arbeit werden daher Materialgradierungen von verschiedenen Stahllegierungen zu einer Cobalt-Chrom Basislegierung untersucht. Die Ergebnissen werden dafür auch mit Resultaten zu vorangegangenen Untersuchungen verglichen. Kern der Arbeit bilden geätzte Schliffbilder der Materialpaarungen und Auswertungen mittels Farbeindringprüfung sowie die metallografische Bestimmung der Porosität. Ziel der Arbeit ist ein defektfreier Aufbau der funktional gradierten Materialpaarungen.
The effect of the oscillating metal vapor plume on the keyhole and molten pool behavior during the laser beam welding of AlMg3 aluminum alloys is investigated by the experimental and numerical method. The real-time height of the metal vapor plume is measured by high-speed camera observation. The obtained experimental results are used to evaluate the additional heating source and laser beam attenuation caused by the scattering and absorption based on the Beer-Lambert theory. Furthermore, the dynamic behavior of the metal vapor plume is incorporated into a 3D transient heat transfer and fluid flow model, coupled with the ray tracing method, for the laser beam welding of the AlMg3 alloy. It is found that the additional heating resulting from the scattered and absorbed laser beam energy by the metal vapor plume significantly expands the shape of the molten pool on the top region. Moreover, the oscillating metal vapor plume caused the fluctuation of the molten pool shape. The probability of keyhole collapse at the bottom increases significantly to 72% due to the oscillating laser power induced by the laser beam attenuation. The internal interplay between the metal vapor plume, molten pool shape, and the keyhole collapse are obtained. The developed model has been validated by the experiments, which shows a good agreement.
Through experimental observation and auxiliary numerical simulation, this investigation studies the different types of grain refinement of 5754 aluminum alloy laser beam welding by applying a transverse oscillating magnetic field. Scanning electron microscope results have proved that the application of a magnetic field can reduce the average crystal branch width and increase its number. The interaction between the induced eddy current generated by the Seebeck effect and the applied external magnetic field produces a Lorentz force, which is important for the increase of the number of crystal branches. Based on the theory of dendrite fragmentation and the magnetic field-induced branches increment, the grain size reduction caused by the magnetic field is studied. Furthermore, the effects of the magnetic field are analyzed by combining a phase field method model and simulations of nucleation and grain growth. The grain distribution and average grain size after welding verifies the reliability of the model. In addition, the introduction of a magnetic field can increase the number of periodic three-dimensional solidification patterns. In the intersection of two periods of solidification patterns, the metal can be re-melted and then re-solidified, which prevents the grains that have been solidified and formed previously from further growth and generates some small cellular grains in the new fusion line. The magnetic field increases the building frequency of these solidification structures and thus promotes this kind of grain refinement.
The weld quality and the possible defect formation are directly determined by the weld pool shape and the thermo-fluid dynamics therein. In this paper, an untypical weld pool profile, i.e., elongated at its top and bottom but narrowed at the middle, is found experimentally and numerically in the wire feed laser beam welding. The detrimental influence of the weld pool narrowing on the element transport is analyzed and discussed. A magnetohydrodynamic technique is utilized to suppress the narrowing, aiming at a more homogenous element distribution. It is found that a low-temperature region is formed in the middle of the weld pool due to the interaction of the two dominant circulations from the top and bottom regions. The weld pool is significantly narrowed due to the untypical growth of the mushy zone in the low-temperature region, which results in a direct blocking effect on the downward flow and the premature solidification in the middle region. The Lorentz force produced by a transverse oscillating magnetic field shows the potential to change the flow pattern into a single-circulation type and the low-temperature-gradient region is mitigated.
Therefore, the downward transfer channel is widened, and its premature solidification is prevented. The numerical results are well validated by experimental measurements of metal/glass observation and X-ray fluorescence element mapping.
Numerical analysis of ultrasonic vibration enhanced friction stir welding of dissimilar Al/Mg alloys
(2023)
The ultrasonic vibration enhanced friction stir welding (UVeFSW) process has unique advantages in joining dissimilar Al/Mg alloys. While there are complex coupling mechanisms of multi-fields in the process, it is of great significance to model this process, to reveal the influence mechanism of ultrasonic vibration on the formation of Al/Mg joints.
In this study, the acoustic-plastic constitutive equation was established by considering the influence of both ultrasonic softening and residual hardening on the flow stress at different temperatures and strain rates. And the ultrasonic induced friction reduction (UiFR) effect on friction coefficient in different relative directions at the FSW tool-workpiece interface was quantitatively calculated and analyzed.
The Al/Mg UVeFSW process model was developed through introducing the above acoustic effects into the model of Al/Mg friction stir welding (FSW). The ultrasonic energy is stronger on the aluminum alloy side. In the stirred zone, there is the pattern distribution of ultrasonic sound pressure and energy. The heat generation at the tool-workpiece contact interface and viscous dissipation were reduced after applying ultrasonic vibra-tion. Due to the UiFR effect, the projection of friction coefficient and heat flux distributions at the tool-workpiece interface present a "deformed" butterfly shape. The calculated results show that ultrasonic vibra-tion enhanced the material flow and promoted the mixing of dissimilar materials.
The contactless magnetohydrodynamic technology has been considered as a potential and promising method to improve the weld qualities of deep penetration laser beam welding. In this paper, numerical investigations are conducted to study the influence of the auxiliary oscillating magnetic field on the porosity suppression in laser beam welding of 5754 aluminum alloy. To obtain a deeper insight into the suppression mechanism, a three-dimensional transient multi-physical model is developed to calculate the heat transfer, fluid flow, keyhole dynamic, and magnetohydrodynamics. A ray tracing algorithm is employed to calculate the laser energy distribution on the keyhole wall. A time-averaged downward Lorentz force is produced by an oscillating magnetic field. This force acts in the molten pool, leading to a dominant downward flow motion in the longitudinal section, which blocks the bubble migration from the keyhole tip to the rear part of the molten pool. Therefore, the possibility for the bubbles to be captured by the solidification front is reduced. The electromagnetic expulsive force provides an additional upward escaping speed for the bubbles of 1 m/s ~ 5 m/s in the lower and middle region of the molten pool. The simulation results are in a good agreement with experimental measurements. Based on the results obtained in this study, a better understanding of the underlying physics in laser beam welding enhanced by an auxiliary oscillating magnetic field can be provided and thus the welding process can be further optimized reducing the porosity formation.
A three-dimensional numerical model was developed to accurately predict the steady-state weld pool shape in full penetration laser beam welding. The model accounts for the coupling between the heat transfer and the fluid dynamics by considering the effects of solid/liquid phase transition, thermo-capillary convection, natural convection, and phase-specific and temperature-dependent material properties up to the evaporation temperature. A fixed right circular cone was utilized as a keyhole geometry to consider the heat absorbed from the laser beam. The model was used to analyze the influence of the thermodynamic activity of solutes and turbulence on the weld pool shape. A mesh sensitivity analysis was performed on a hybrid mesh combining hexahedral and tetrahedral elements. For the case of full penetration laser beam welding of 8 mm thick unalloyed steel sheets, the dependence of the weld pool shape on the surface-active element sulfur was found to be negligible. The analysis of the results showed that a laminar formulation is sufficient for accurately predicting the weld pool shape since the turbulence has a minor impact on the flow dynamics in the weld pool. The validity of the numerical results was backed up by experimental measurements and observations, including weld pool length, local temperature history, and a range of metallographic crosssections.
Numerical study on the formation of a bulging region in partial penetration laser beam welding
(2023)
A transient three-dimensional thermo-fluid dynamics numerical model was developed to study the formation of a bulging region in partial penetration laser beam welding. The model accounts for the coupling between the fluid flow, the heat transfer, and the keyhole dynamics by considering the effects of multiple reflections and Fresnel absorption of the laser beam in the keyhole, the phase transitions during melting and evaporating, the thermo-capillary convection, the natural convection, and the phase-specific and temperature-dependent material properties up to the evaporation temperature. The validity of the model was backed up by experimentally obtained data, including the drilling time, the weld pool length, the local temperature history outside the weld pool, the process efficiency, and a range of metallographic crosssections.
The model was applied for the cases of partial penetration laser beam welding of 8 mm and 12 mm thick unalloyed steel sheets. The obtained experimental and numerical results reveal that the bulging region forms transiently depending on the penetration depth of the weld, showing a tendency to transition from a slight bulging to a fully developed bulging region between penetration depths of 6 mm and 9 mm, respectively.
The spatial laser energy absorption inside the keyhole is decisive for the dynamic molten pool behaviors and the resultant weld properties in high-power laser beam welding (LBW). In this paper, a numerical simulation of the LBW process, considering the 3D transient heat transfer, fluid flow, and keyhole dynamics, is implemented, in which the free surface is tracked by the volume-of-fluid algorithm. The underlying laser-material interactions i.e., the multiple reflections and Fresnel absorption, are considered by an advanced ray-tracing method based on a localized Level-Set strategy and a temperature-dependent absorption coefficient. The laser energy absorption is analyzed from a time-averaged point of view for a better statistical representation. It is found for the first time that a noticeable drop of the time-averaged laser energy absorption occurs at the focus position of the laser beam, and the rest region of the keyhole has relatively homogenous absorbed energy. This unique absorption pattern may lead to a certain keyhole instability and have a strong correlation with the detrimental bulging and narrowing phenomena in the molten pool. The influence of the different focus positions of the laser beam on the keyhole dynamics and molten pool profile is also analyzed and compared. The obtained numerical results are compared with experimental measurements to assure the validity of the proposed model.
Eine typische Automobilkarosserie kann bis zu 5000 Widerstandspunktschweißverbindungen aufweisen, welche hohen Qualitätsanforderungen genügen müssen. Daher ist eine durchgehende Prozessüberwachung unerlässlich. Die Transformation zur E-Mobilität in der Automobilindustrie und die damit einhergehende Reichweitenproblematik treiben die Entwicklung und Einführung neuer hochfester Stähle an. Dies resultiert in einem gesteigerten Fertigungsaufwand hinsichtlich einer stabilen Prozess-führung in der Fügetechnik. Um diesen Anstieg an Komplexität zu bewältigen, sind die Methoden der künstlichen Intelligenz ein geeignetes Mittel. Mit ihnen kann, durch Auswertung der Prozessparameter und -signale, die individuelle Schweißpunktqualität sichergesellt werden. Die Vorhersagegenauigkeit von neuen Daten, also das extrapolieren, stellt für die meisten Algorithmen eine große Herausforderung dar.
In dieser Arbeit wird ein künstliches neuronales Netz zur Vorhersage des Punktdurchmessers von Widerstandspunktschweißungen anhand von Prozessparametern implementiert. Die Vorhersagegenauigkeit und Extrapolationsfähigkeit des Modells wird durch die Auswertung des dynamischen Widerstandssignals verbessert.
Um die Extrapolationsfähigkeit zu untersuchen, wird die Vorhersagegenauigkeit des Modells mit Daten getestet, die sich in Bezug auf den Werkstoff und der Beschichtungszusammensetzung deutlich von den Trainingsdaten unterscheiden. Dazu wurden mehrere Schweißexperimente mit Werkstoffen verschiedener Hersteller durchgeführt und nur ein Teil der Daten in das Training einbezogen. Die Ergebnisse dieser Arbeit verdeutlichen den positiven Einfluss der Prozesssignale auf die Robustheit des Modells und die Skalierbarkeit der Algorithmen
künstlicher neuronaler Netze auf Daten außerhalb des Trainingsraums.
Durch pulverbasiertes Directed-Energy Deposition lassen sich Gradierungen fertigen, um diskrete Materialübergänge zu vermeiden und die Lebensdauer von Hartschichten zu erhöhen. Die Kombination aus Stahl als Basiswerkstoff und einer verschleiß- und korrosionsbeständigen Co-Cr Legierung verspricht durch Vermeiden von Spannungskonzentrationen das Verhindern von Abplatzungen und Rissen in der Schutzschicht. Um die Qualität des gefertigten Bauteils zu beurteilen, liegen für solche Funktional Gradierten Materialien (FGM) wenig Erkenntnisse vor. Daher wird im Rahmen dieser Studie eine Methodik erarbeitet, um die relative Dichte eines Funktional Gradierten Materials auf Stahl und Co-Cr Basis mittels Maschinendaten zu bestimmen. Anschließend wird unter Einsatz eines künstlichen neuronalen Netzes anhand von Sensordaten die relative Dichte vorhergesagt. Das trainierte Netz erreicht eine Vorhersagegenauigkeiten von 99,83%. Abschließend wird eine Anwendung anhand von einem Demonstrator gezeigt.
The performance of titanium alloy (Ti6Al4V) surfaces was investigated in lubricated reciprocating sliding tribological tests (RSTT). Special emphasis was laid on the effect of surface nanostructures in area of contact on the respective friction and wear behaviour. These so-called laser-induced periodic surface structures (LIPSS, ripples) were produced on the titanium alloy surface upon scan processing in air by an ultrashort pulsed femtosecond (fs) laser. As lubricant served two types of base oils, a pure polyalcylene-glycol, and an SAE 0W30 oil containing only antioxidants and temperature stabilizers. Tribological tests were carried out on polished as well as LIPSS covered areas using both types of base oil. A test metrics was established, combining the additive 2-ethylhexyl-zincdithiophosphate (ZDDP) or the ionic liquid [P6,6,6,14] [DEHP] (98% purity) with the respective base oils. The test metrics also considered the orientation of motion with respect to the orientation of the structures formed on the surface. Results are presented which show that the interplay between LIPSS and the local chemistry formed by the respective additives is beneficial for the tribological behaviour of the titanium alloy. Certain combinations of base oil, additive and LIPSS reduced friction and wear significantly in the tribological contact.
Rapidly advancing technologies and progressive digitisation are posing challenges to the established quality infrastructure (QI). In response, the key stakeholders of the German QI established the initiative QI-Digital aimed at developing new solutions for modern quality assurance. One of the central use cases herein is quality assurance for additive manufacturing, in which a fully interlinked additive manufacturing process chain is established. The intention is to collect and process data from each production step, allowing for a comprehensive digital view of the physical material flow. Within this process chain, prototypes of digital QI tools like machine readable standards and digital quality certificates are being demonstrated, tested, and evolved. This is complemented by research on the process level, comprising the evaluation and refinement of methods for in-situ and ex-situ quality assurance, as well as algorithms for registration, reduction, and analysis of process data. This paper presents the status, goals, and vision for the QI-Digital use case additive manufacturing.
The amount of absorbed energy in the keyhole as well as its spatial and temporal distribution is essential to model the laser beam welding process. The recoil pressure, which develops because of the evaporation process induced by the absorbed laser energy at the keyhole wall, is a key determining factor for the macroscopic flow of the molten metal in the weld pool during high-power laser beam welding. Consequently, a realistic implementation of the effect of the laser radiation on the weld metal is crucial to obtain reliable and accurate simulation results.
In this paper, we discuss manyfold different improvements on the laser-material interaction, namely the ray-tracing method, in the numerical simulation of the laser beam welding process. The first improvement relates to locating the exact reflection points in the ray tracing method using a so-called cosine condition in the determination algorithm for the intersection of the reflected rays and the keyhole surface. A second correction refers to the numerical treatment of the Gaussian distribution of the laser beam, whose beam width is defined by a decay of the laser intensity by a factor of 1/e2 thus ignoring around 14 % of the total laser beam energy. In a third step, the changes in the laser radiation distribution in the vertical direction were adapted by using different approximations for the converging and the diverging regions of the laser beam thus mimicking the beam caustic. Finally, a virtual mesh refinement was adopted in the ray tracing routine. The obtained numerical results were validated with experimental measurements.
New developments in nickel-based superalloys and production methods, such as the use of additive manufacturing (AM), can result in innovative designs for turbines. It is crucial to understand how the material behaves during the AM process to advance industrial use of these techniques. An analytical model based on reaction-diffusion formalism is developed to better explain the solidification behavior of the material during laser metal deposition (LMD). The well-known Scheil-Gulliver theory has some drawbacks, such as the assumption of equilibrium at the solid-liquid interface, which is addressed by this method. The solidified fractions under the Scheil model and the pure equilibrium model are calculated using CALPHAD simulations. Differential scanning calorimeter is used to measure the heat flow during the solid-liquid phase transformation, the result of which is further converted to solidified fractions. The analytical model is compared with all the other models for validation.