Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Dokumenttyp
Sprache
- Englisch (410)
- Deutsch (12)
- Mehrsprachig (3)
Schlagworte
- Mechanochemistry (95)
- MALDI-TOF MS (41)
- Polylactide (36)
- In situ (32)
- Crystallization (18)
- Nanoparticles (17)
- Calcium sulfate (14)
- Catalysis (13)
- Cyclization (13)
- XRD (13)
- Polymorphism (11)
- Struvite (11)
- C-F bond activation (10)
- Heterogeneous catalysis (10)
- MOF (10)
- Phosphates (10)
- Ring-opening polymerization (10)
- Cocrystal (9)
- Flexible crystals (9)
- XANES (9)
- In situ real-time monitoring (8)
- MALDI TOF MS (8)
- MOFs (8)
- X-ray diffraction (8)
- XAS (8)
- Amorphous phases (7)
- Biobased polymers (7)
- Diffraction (7)
- EXAFS (7)
- High-entropy alloys (7)
- Polycondensation (7)
- Polymerization (7)
- SAXS (7)
- Scattering (7)
- Synchrotron (7)
- Transition metals (7)
- Anhydrite (6)
- Catalyst (6)
- Corrosion (6)
- Energetic materials (6)
- High-pressure (6)
- Mesoporosity (6)
- Crystalinity (5)
- Green chemistry (5)
- Gypsum (5)
- Kinetics (5)
- Mass spectrometry (5)
- Nucleation (5)
- Oxygen Reduction Reaction (5)
- PGM-free catalyst (5)
- Ring-expansion polymerization (5)
- Synthesis (5)
- Transesterification (5)
- Transition metal (5)
- Waveguide (5)
- ZCF (5)
- Affinity chromatography (4)
- Automated synthesis (4)
- Bassanite (4)
- Boehmite (4)
- Catalysts (4)
- Cocrystals (4)
- Crystal Engineering (4)
- High entropy alloys (4)
- Mechanical properties (4)
- Metal phosphonates (4)
- Metal-organic-frameworks (4)
- Microstructure (4)
- NTE (4)
- Nanocomposite (4)
- Phase diagrams (4)
- Polymorph (4)
- Proton conductivity (4)
- Reactive extrusion (4)
- SAXS/WAXS (4)
- Single-source precursors (4)
- Thermography (4)
- X-ray absorption spectroscopy (4)
- Ab-initio (3)
- Absorption edge tomography (3)
- Adsorption (3)
- Antibodies (3)
- C-C coupling (3)
- Coordination polymers (3)
- Copolymer (3)
- Crosslinking (3)
- Cycloalyphatic epoxy oligosiloxane (3)
- Density functional theory (3)
- Electrochemistry (3)
- Element-specific spectroscopy (3)
- Fluorescence (3)
- In situ Raman (3)
- In situ studies (3)
- LC-MS (3)
- Lignin (3)
- Liquid chromatography (3)
- Luminescence (3)
- Magnetism (3)
- Mesocrystal (3)
- Mesocrystals (3)
- Non-classical crystallization theory (3)
- PXRD (3)
- Phase transition (3)
- Polyester (3)
- Polyglycerol (3)
- Polymers (3)
- Polyurethane (3)
- Raman spectroscopy (3)
- Reference material (3)
- Ring opening polymerization (3)
- Simvastatin (3)
- Sol-gel (3)
- Solid-state (3)
- Synchrotron radiation (3)
- TDEP (3)
- TEM (3)
- Thermal decomposition (3)
- Thermal degradation (3)
- Time resolved (3)
- ZIF-8 (3)
- ZrF4 (3)
- API (2)
- Ab initio simulation (2)
- Acoustic levitation (2)
- Additive Manufacturing (2)
- Aging (2)
- Aktivkohle (2)
- Alkali-activated materials (2)
- Alkaline earth metal coordination polymers (2)
- Amphiphilicity (2)
- BAMline (2)
- Bismuth (2)
- Building and Construction (2)
- Coating (2)
- Complex oxides (2)
- Core-shell (2)
- Crystal (2)
- Crystal engineering (2)
- Crystals (2)
- DFT (2)
- DFT calculation (2)
- Density Functional Theory (2)
- Dipsersive XAS (2)
- Dispersive XAS (2)
- EOS (2)
- EU FP7 project NanoValid (2)
- Energy storage (2)
- Extended X-ray absorption fine structure (EXAFS) (2)
- FTIR (2)
- Fluoride (2)
- GEXRF (2)
- General Chemistry (2)
- Glutaraldehyde (2)
- Grazing exit (2)
- HF (2)
- HF-shuttle (2)
- High Pressure (2)
- ICP-OES (2)
- In situ PXRD (2)
- In-situ (2)
- Inter-laboratory comparison (2)
- Iron oxide nanoparticles (2)
- Kinetic (2)
- Knoevenagel condensation (2)
- Lactide (2)
- Lanthanide (2)
- Large-scale processing (2)
- Large-scale production (2)
- Lifetime (2)
- MALDI (2)
- MIC (2)
- MOUSE (2)
- Mass spectrometry of polymers (2)
- Material synthesis (2)
- Materials (2)
- Materials Chemistry (2)
- Mechanical flexibility (2)
- Mechanical property (2)
- Metal organic framework (2)
- Metal organic frameworks (2)
- Metal–organic frameworks (2)
- Method (2)
- Microbially induced corrosion (2)
- Milling (2)
- Mixed gas atmosphere (2)
- Molecular masses (2)
- N-Chlorination (2)
- Nano (2)
- Nanoparticle (2)
- Nanostructure quantification (2)
- Nitrides (2)
- Non-classical crystallization (2)
- OER (2)
- Organic Chemistry (2)
- Organic crystal (2)
- PDF (2)
- Particle (2)
- Particle size (2)
- Phenolic compounds (2)
- Photocatalysis (2)
- Photocuring (2)
- Physical and Theoretical Chemistry (2)
- Platinum (2)
- Polyglycolide (2)
- Polymer (2)
- Polymorphs (2)
- Postfluorination (2)
- Powder X-ray diffraction (2)
- Proximatanalyse (2)
- Purification (2)
- Quality assurance (2)
- Quantification (2)
- Quick-EXAFS (2)
- ROPPOC (2)
- Reconstructed ion chromatograms (2)
- Reductive amination (2)
- Reverse Monte Carlo (RMC) (2)
- Rietveld (2)
- Ring-opening Polymerization (2)
- Round Robin (2)
- SEC (2)
- Sapphire (2)
- Scanning electron microscopy (2)
- Selective oxidation (2)
- Silica nanoparticles (2)
- Single crystal (2)
- SnO2 (2)
- Solid state NMR (2)
- Solubility (2)
- Stability (2)
- Sulfates (2)
- Sulfidation (2)
- Surface chemistry (2)
- Synchrotron studies (2)
- Synchrotron tomography (2)
- TRIS (2)
- Technical lignin (2)
- Thermogravimetrie (2)
- Time-resolved (2)
- Tin acetates (2)
- Transmission electron microscopy (2)
- Two-dimensional chromatography (2D-LC) (2)
- UV degradation (2)
- UV radiation (2)
- Upconversion (2)
- X-ray and electron diffraction (2)
- XAFS (2)
- XPS (2)
- ZIF (2)
- Zeolitic imidazolate framework (2)
- Zersetzungsgasanalyse (2)
- Zirconium (2)
- 1,2,3-triazole (1)
- 29Si (1)
- 2D chromatography (1)
- 5-hydroxynicotinic acid (1)
- 89Y MAS-NMR (1)
- A4F (1)
- AEMFC (1)
- AET (1)
- Absorption edge (1)
- Absorption spectrometry (1)
- Acid resistance (1)
- Additive manufacturing (1)
- Admixtures (1)
- Affinity Chromatography (1)
- Affinity Extraction (1)
- Affinity Separation (1)
- Affinity extraction (1)
- Affinity support (1)
- Aggregation (1)
- Algorithm (1)
- Alkaline brines (1)
- Alkaline earth metal (1)
- Alloys (1)
- Alpha-tricalcium phosphate (1)
- Alternating co-poly(ether pyridine)s (1)
- Aluminium (1)
- Aluminium fluorides (1)
- Aluminium teflates (1)
- Aluminum oxide (1)
- Amino acid analysis (1)
- Amorphous calcium sulfate (1)
- Amorphous materials (1)
- Analytical techniques (1)
- Annealing (1)
- Anthracene schiff base (1)
- Antibody Purification (1)
- Antibody purification (1)
- Anticancer (1)
- Antikensammlung Berlin (1)
- Aqueous synthesis (1)
- Aromatic amino acid analysis AAAA (1)
- Aromatic amino acid analysis aaaa (1)
- Aromatic organic compounds, (1)
- Aromatic pollutants (1)
- Artificial neural network modelling (1)
- Artificial weathering (1)
- Atom probe tomography (1)
- Au nanoparticles (1)
- Augenbohne (1)
- Automated Purification (1)
- BESSY (1)
- BET (1)
- BSA (1)
- Ball milling (1)
- Band gap (1)
- Beamline (1)
- Bending mechanism (1)
- Berliner Tuffsteinfassaden (1)
- Beschichtung (1)
- Betondickglasfenster des Glockenturms am Eiermannbau (1)
- Bifunctionality (1)
- Bimetallic frameworks (1)
- Binder Jetting (1)
- Bioabbaubare Polymere (1)
- Biobased (1)
- Biocomposite (1)
- Bioconjugation (1)
- Biodegradable polymers (1)
- Biofunctional Molecules (1)
- Biogene Schwefelsäurekorrosion (1)
- Biogenic acid corrosion (1)
- Biological & biomedical applications (1)
- Biomaterials (1)
- Bioseparation (1)
- Biosourced isosorbide (1)
- Bismuth Ferrite (1)
- Borosilicate Glass (1)
- Bovine serum albumin (1)
- C-F activation (1)
- CCMat (1)
- Cadmium and lead remediation (1)
- Calcium monofluoride (1)
- Calorimetry (1)
- Capillary electrophoresis (1)
- Carbon dioxide reduction (1)
- Carbon materials (1)
- Carboxyl group (1)
- Carboxylative cyclization of propargyl alcohols (1)
- Carrier (1)
- Carrier protein (1)
- Cassical nucleation theory (1)
- Catalytic fixation of carbon dioxide (1)
- Catechol (1)
- Cationic photocuring (1)
- Cement (1)
- Cement admixtures (1)
- Cement hydration (1)
- Charge-to-size-ratio (1)
- Chemically Complex Materials (1)
- Chemically complex alloys (1)
- Chemisorption (1)
- Chemputer (1)
- Chromatography (HIC) (1)
- Citizen Science (1)
- Classification (1)
- Clean energy technology (1)
- Clerodin (1)
- Co-crystal (1)
- Coating materials (1)
- Coatings and Films (1)
- Cobalt (1)
- Cobalt (III) Schiff base complex (1)
- Cobalt and zinc oxides (1)
- Column holder (1)
- Combinatorial peptide library (1)
- Commercialization (1)
- Complex (1)
- Composites (1)
- Compositional complex alloys (1)
- Computational chemistry (1)
- Concentration step (1)
- Condensed Matter Physics (1)
- Construction (1)
- Conversion (1)
- Coordination chemistry (1)
- Coordination polymer (1)
- Copolymerization (1)
- Corundum (1)
- CrMnFeCoNi (1)
- Cristobalite frameworks (1)
- Croyo-starage (1)
- Crystal Engeneering (1)
- Crystal growth (1)
- Crystal structure (1)
- Crystallinity (1)
- Crystallization sequence (1)
- Crystalstructure (1)
- Cu catalysts (1)
- Cycles (1)
- Cyclic (1)
- Cyclisation (1)
- Cycloaddition (1)
- Cycloaliphatic epoxy oligosiloxane (1)
- Cycloparaphenylenes (1)
- DSC (1)
- Data analysis (1)
- Degradation (1)
- Degradation mechanisms (1)
- Dendrimer (1)
- Density-functional theory (1)
- Depollution (1)
- Depth resolved XANES (1)
- Diagnostic Antibodies (1)
- Digitization (1)
- Dimorphs (1)
- Direct fluorine-metal bond (1)
- Disorder (1)
- Dispersive-XAS (1)
- Double complex compound (1)
- Double complex salts (1)
- Down Stream Processing (1)
- Downstream processing (1)
- Dynamic vapor sorption (1)
- ELISA (1)
- ESEM (1)
- ESI-TOF-MS (1)
- Elastic Crystal (1)
- Elasticity (1)
- Electrical conductivity (1)
- Electrical properties (1)
- Electrocatalysis (1)
- Electrochemical CO2 conversion (1)
- Electrode materials (1)
- Electrodes (1)
- Electron microscopy (1)
- Electronic (1)
- Electronic structure (1)
- Electronic, Optical and Magnetic Materials (1)
- Encapsulation (1)
- Energetic Materials (1)
- Energy (1)
- Energy input (1)
- Energy production (1)
- Energy systems (1)
- Enthalpy of solution (1)
- Enthalpy of sublimation (1)
- Environmental Chemistry (1)
- Environmental impacts (1)
- Epitaxy (1)
- Epoxy conversion degree (1)
- Ettringen tuff (1)
- Eu (1)
- Europium (1)
- Evaporation (1)
- Evaporite deposits (1)
- Excess surface work (1)
- Exposed metal sites (1)
- Extended X-ray absorption fine structure (1)
- Extended X-ray absorption fine structure (EXAFS), (1)
- Extrusion (1)
- FPLC (1)
- FT-IR (1)
- Facilitated activation (1)
- Ferroelectric (1)
- Fexible crystals (1)
- Filter (1)
- Flexible (1)
- Flexible waveguide (1)
- Fluorides (1)
- Fluorinated MOFs (1)
- Fluorine Interaction (1)
- Fluorine coordination (1)
- Fluorine coordination polymers (1)
- Force microscopy (1)
- Formaldehyde (1)
- Friction (1)
- Functional materials (1)
- Functionality type distribution (1)
- Gandolfi method (1)
- Gas flow assisted powder deposition (1)
- General Energy (1)
- General Environmental Science (1)
- General Materials Science (1)
- General Physics and Astronomy (1)
- Glass Support (1)
- Glucose (1)
- Glycolide (1)
- Gold mit Synchrotronstrahlung (1)
- Gradient elution (1)
- Grafting (1)
- Graphene related 2D materials (1)
- Graphite furnace (1)
- Grazin exit XANES (1)
- Greek curse tablets (1)
- Green Chemistry (1)
- Grignard reaction (1)
- Grignard-Reaktion (1)
- Gypsum' SAXS (1)
- H3PO3 (1)
- H3PO4 life cycle (1)
- HERFD-XAS (1)
- HPLC (1)
- HR-CS-MAS (1)
- Halide Perovskites (1)
- Halogen bond interaction (1)
- Hard-energy X-ray photoelectron spectroscopy (1)
- Heavy metals (1)
- Hexafluorobenzen (1)
- High entropy alloy (1)
- High pressure (1)
- High temperature corrosion (1)
- High-Speed Separations (1)
- High-density polyethylene (1)
- High-pressure high-temperature (1)
- High-pressure volumetric analyzer (HPVA) (1)
- High-temperature fuel cells (1)
- Holzschutzmittel (1)
- Host–guest systems (1)
- Human Plasma (1)
- Human plasma (1)
- Humidity (1)
- Hydantoin (1)
- Hydration (1)
- Hydrochemical evolution (1)
- Hydrofluorination (1)
- Hydrogen Fuelling Stations (1)
- Hydrogen Storage (1)
- Hydrophobic interaction (1)
- Hydrophobic interaction chromatography (1)
- Hydrophobicity (1)
- Hyperbranched polymer (1)
- IgG determination (1)
- Igg (1)
- Immunoglobulins (1)
- Immunoprecipitation (1)
- Impact Sensitivity (1)
- In Situ (1)
- In situ EXAFS (1)
- In situ SAXS/WAXS (1)
- In situ X-ray diffraction (1)
- In situ XRD (1)
- In situ coupling (1)
- In situ diffraction (1)
- In-Situ Characterization (1)
- In-situ SAXS/WAXS (1)
- In-situ analysis (1)
- In-situ scattering (1)
- Industrial and Manufacturing Engineering (1)
- Inelastic Neutron Scattering Spectroscopy (1)
- Insulators (1)
- Inter-laborator comparison (1)
- Interlaboratory comparability (1)
- Intermediate phases (1)
- Iridium compounds (1)
- Iron oxide (1)
- Iron oxide films (1)
- Isosorbide (1)
- K-nearest neighbor (1)
- Kaiser-Wilhelm-Gedächtniskirche (1)
- Kandelaber des Ensembles am Charlottenburger Tor (1)
- Keggin Cluster (1)
- Kinetics from experiments (1)
- Knoevenagel (1)
- Künstliche Intelligenz (1)
- L-lactide (1)
- LC / MALDI-TOF-MS coupling (1)
- LC x ESI-TOF-MS (1)
- LCCC (1)
- Lacunary Keggin ion (1)
- Lanthanides (1)
- Lanthanides doped coordination polymers (1)
- Lanthanoide (1)
- Large-scale synthesis (1)
- Lattice enthalpy (1)
- Layer-by-Layer (1)
- Lead ions (1)
- Lead isotopes (1)
- Levitation (1)
- Lewis Acid (1)
- Lewis superacids (1)
- Ligandsubstitution (1)
- Lignin modification (1)
- Lignosulfonate (1)
- Lignosulfonates (1)
- Linker (1)
- Liquid-liquid-phase-separation (1)
- Lithium-ion battery (1)
- Lithium-sulfur battery (1)
- Local structure (1)
- Localized surface plasmon resonance (1)
- MALDI-TOF mass spectrometry (1)
- MAPbI3 perovskites (1)
- MOF-74 (1)
- Macrocycles (1)
- Material characterization (1)
- Materials Stability (1)
- Measurement (1)
- Mechanical activation (1)
- Mechanical alloying (1)
- Mechanical response (1)
- Mechanically flexible crystals (1)
- Mechanically flexible molecular crystals (1)
- Mechanism (1)
- Mechanochemical oxidation (1)
- Mechanochemical pictographs (1)
- Mechanochemical syntheses (1)
- Mechanochemical synthesis (1)
- Mechanochemictry (1)
- Mechanochemie (1)
- Mechanophotonics (1)
- Mesoporous (1)
- Metal Organic Frameworks (1)
- Metal and alloys (1)
- Metal fluorides (1)
- Metal nanoparicels (1)
- Metal-organic frameworks (MOFs) (1)
- Metal−organic frameworks (1)
- Methodology (1)
- Micromanipulation (1)
- Microstructure-property relations (1)
- Minerals (1)
- Mixed-ligand MOFs (1)
- Mixed-linkers (1)
- MoO3 (1)
- Modification (1)
- Moisture (1)
- Molar mass distribution (1)
- Molecular Conformation (1)
- Molecular Organic Frameworks (1)
- Molecular VOx catalysts (1)
- Molecular mass distribution (1)
- Molecular recognition (1)
- Monoclonal Antibodies (1)
- Monolith (1)
- Multi-principal element alloys (1)
- Multicomponent (1)
- Multivariate data analysis (1)
- Mussel-inspired adhesive systems (1)
- MySpot (1)
- Mössbauer Spectroscopy (1)
- NMR (1)
- NMR probe Development (1)
- NMR spectroscopy (1)
- NMR-Spektroskopie (1)
- Nafion 117 (1)
- Naica (1)
- Nano particles (1)
- NanoValid (1)
- Nanocarrier (1)
- Nanomaterials (1)
- Nanoparticle size measurement (1)
- Nanoparticle synthesis (1)
- Nanoparticular TiO2 (Anatase) (1)
- Nanoplattform (1)
- Nanoscience (1)
- Nanostructure (1)
- Near edge X-ray absorption fine structure spectroscopy (1)
- Nickel (1)
- Nickel nanoparticles (1)
- Nitric acid (1)
- Nitrification (1)
- Nitrobenzene reduction (1)
- Nobel-metal free electrocatalysis (1)
- Nomenclature (1)
- Nonclassical crystallization (1)
- Noncovalent interactions (1)
- Nondestructive testing techniques (1)
- Nonlinear optics (1)
- Nonspecific binding (NSB) (1)
- Normung (1)
- Nuclear Energy and Engineering (1)
- Nuclear magnetic resonance (1)
- Open Science (1)
- Optical and Magnetic Materials (1)
- Optical waveguides (1)
- Organic compounds (1)
- Organic-inorganic adsorbents (1)
- Osmium (1)
- Oxidation (1)
- Oxocobaltates (1)
- Oxygen Evolution Catalyst (1)
- Oxygen evolution reaction (OER) (1)
- Oxygen reduction reaction (1)
- PCA (1)
- PQQ (1)
- PVDF-Based membrane (1)
- Pair Distribution Functions (1)
- Pair distribution function (1)
- Particle accretion (1)
- Pb isotopes (1)
- Pentafluoropyridine (1)
- Peptide binder (1)
- Pergamonmuseums (1)
- Periodate oxidation (1)
- Pflanzenvirus (1)
- Pharmaceuticals (1)
- Phonons (1)
- Phosphate (1)
- Phosphonate esters (1)
- Phosphonates (1)
- Phosphonic acids (1)
- Phosphorous recovery (1)
- Photooxidation (1)
- Physical and theoretical chemistry (1)
- Piezoresponse (1)
- Plant virus (1)
- Plasmonic photocatalysis (1)
- Plastic deformation (1)
- Platinum group metals (1)
- Polarization (1)
- Pollution (1)
- Poly(ether-phosphoramide)s sulfides (1)
- Poly(ether-sulfone) (1)
- Poly(lactides) (1)
- Polycarbonate-co-dimethylsiloxane copolymer (1)
- Polyclonal Antibodies (1)
- Polyelektrolyt (1)
- Polylactides (1)
- Polylaktid (1)
- Polylaktide (1)
- Polymer film (1)
- Polymers and Plastics (1)
- Polymorphy (1)
- Polyoxometalates (1)
- Polyurethanes (1)
- Pore orientation (1)
- Pore space (1)
- Pore structure (1)
- Postsynthetic modification (1)
- Pphosphates (1)
- Precipitation (1)
- Prediction (1)
- Prediction relative (1)
- Preferred orientation (1)
- Process analytical technology (1)
- Process control (1)
- Protein (1)
- Protein A (1)
- Protein Purification (1)
- Protein a (1)
- Protein hydrolysis (1)
- Protein immobilization (1)
- Protein quantification (1)
- Proton conducting materials (1)
- Proton cunductor (1)
- Proton exchange membrane fuel cells (1)
- Prozessanalytik (1)
- Prozesskontrolle (1)
- Pseudo-translationalsublattices (1)
- Pulsed laser ablation (1)
- Quantum mechanics (1)
- Quick-XAS (1)
- RXES (1)
- Radiografische Untersuchung (1)
- Raman (1)
- Rare earth elements separations (1)
- Reactions (1)
- Real-time infrared spectroscopy (1)
- Recycling (1)
- Refractory alloys (1)
- Regeneration (1)
- Renewable Energy (1)
- Renewable Energy, Sustainability and the Environment (1)
- Renewable copolymers (1)
- Reverse Monte Carlo (1)
- Reversible Hydrogen Storage (1)
- Reversible adsorption. (1)
- Rh-Ir alloys (1)
- Rhodiumcomplexes (1)
- Roadmap (1)
- Robustness (1)
- SDS-PAGE (1)
- SEM (1)
- Salicylate (1)
- Sall-angle scattering (1)
- Saponite (1)
- Scaffold (1)
- Schlangenbohne (1)
- Schriftrollen vom Toten Meer (1)
- Self-assembled monolayer (SAM) (1)
- Self-assembled monolayers (SAM) (1)
- Self-assembly (1)
- Semi-Interpenetrating Network (1)
- Semi-interpenetrating networks (1)
- Separability assumption (1)
- Separation (1)
- Sequential spectroscopic data (1)
- Short chained Phthalates (1)
- Short chained phthalates (1)
- Short range order (1)
- Siderite (1)
- Silanes (1)
- Silica gel modification (1)
- Sillver (1)
- Silver (1)
- Simvastatine (1)
- Single source precursors (1)
- Sintered Material (1)
- Size distribution (1)
- Size-exclusion chromatography (SEC) (1)
- Small angle x-ray scattering (1)
- Small-angle X-ray scattering (1)
- Small-angle scattering (1)
- Soda lakes (1)
- Sodium carbonate minerals (1)
- Soft-templated (1)
- Solid phase (1)
- Solid-phase extraction (SPE) (1)
- Sorption isotherm (1)
- Sorption mechanism (1)
- Specific Surface Area (BET) (1)
- Spectral induced polarization (1)
- Spectroscopy (1)
- Spirocyclic (1)
- SrF2 (1)
- Steel (1)
- Stereocomplex (1)
- Strategy and Management (1)
- Structural Analysis (1)
- Structural defects (1)
- Structure analysis (1)
- Structure-mechanical property correlation (1)
- Structures under extreme conditions (1)
- Stuccos (1)
- Supramolecular chemistry (1)
- Surface charge (1)
- Surfaces (1)
- Sustainability (1)
- Sustainability and the Environment (1)
- Sustainable Synthesis (1)
- Sustainable chemisry (1)
- Synchrotron CT (1)
- System method (1)
- TGA (1)
- TPU (1)
- TXRF-XAS (1)
- Technical Lignin (1)
- Temperature (1)
- Termites (1)
- Therapeutic Antibodies (1)
- Thermal expansion (1)
- Thermo-desorption (1)
- Thermochemistry (1)
- Ti-based colloids (1)
- Tin catalysts (1)
- Tin(II)octanoate (1)
- Tomography (1)
- Topas (1)
- Topotactic phase transitions (1)
- Total scattering analysis (1)
- Toxicity (1)
- Transformation pathways (1)
- Transition-metal doped (1)
- Tribochemistry (1)
- Tribology (1)
- Twin-screw extrusion (TSE) (1)
- Twinning (1)
- Two-dimensional liquid chromatography (2D-LC) (1)
- Tyrosine (1)
- UPLC (1)
- UV-curing (1)
- Uncertainty budget (1)
- Up-cycling (1)
- Upscaling (1)
- VRFB (1)
- Vanadium speciation (1)
- Variable temperature (1)
- Vickers hardness (1)
- Vigna unguiculata (1)
- WAXS (1)
- Water stability (1)
- Weathering (1)
- Weibern tuff (1)
- Wood (1)
- X-ray Absorption Spectroscopy (1)
- X-ray absorption near edge structure (XANES) (1)
- X-ray crystal analysis (1)
- X-ray fluorescence spectroscopy (1)
- X-ray magnetic circular dichroism (XMCD) (1)
- X-ray magnetic circular dichroism (XMCD), (1)
- X-ray photoelectron (1)
- X-ray photoelectron spectroscopy (1)
- X-ray refraction (1)
- X-ray scattering (1)
- X-ray spectroscopy (1)
- Xerogel (1)
- Yttrium silicates (1)
- Zeolithe (1)
- Zeolitic Imidazolate Frameworks (1)
- Zeta potential (1)
- Zinc catalyst (1)
- Zyklen (1)
- corrosion (1)
- high entropy alloys (1)
- oxidation (1)
- ring-expansion polymerization (1)
- scanning electron microscopy (1)
- sulfidation (1)
- µ-CT (1)
- Ägyptisches Museum Berlin (1)
- Δμ XANES (1)
Organisationseinheit der BAM
- 6.3 Strukturanalytik (425) (entfernen)
Paper des Monats
- ja (3)
Zirconium vanadate (ZrV2O7) is a well-known negative thermal expansion (NTE) material that exhibits significant isotropic contraction over a broad temperature range (~150°C < T < 800°C). Therefore, it can be used to create composites with controllable expansion coefficients and prevent thermal stress, fatigue, cracking, and deformation at interfaces. We implement interdisciplinary research to analyze such material. We study the influence of the synthesis methods and their parameters on the sample's purity, crystallinity, and homogeneity. Moreover, we implement ab initio-based vibrational computations with partially treated anharmonicity in combination with experimental methods to follow temperature-induced structural changes and rationalize the negative thermal expansion in this material, including the influence of the local structure disorder.
To arrive to sustainable hydrogen-based energy solutions, the understanding of water-splitting catalysts plays the most crucial role. Herein, state-of-the-art hypotheses are combined on electrocatalytic active metal sites toward the oxygen evolution reaction (OER) to develop a highly efficient catalyst based on Earth-abundant cobalt and zinc oxides.
The precursor catalyst Zn0.35Co0.65O is synthesized via a fast microwaveassisted approach at low temperatures. Subsequently, it transforms in situ from the wurtzite structure to the layered γ-Co(O)OH, while most of its zinc leaches out. This material shows outstanding catalytic Performance and stability toward the OER in 1 m KOH (overpotential at 10 mA cm−2 ηinitial = 306 mV, η98 h = 318 mV). By comparing the electrochemical results and ex situ analyses to today’s literature, clear structureactivity correlations are able to be identified. The findings suggest that coordinately unsaturated cobalt octahedra on the surface are indeed the active centers for the OER.
The mechanism of action of zirconium permanent modifiers on graphite surfaces was investigated in order to understand its influence on the analytical signal in atomic and molecular absorption spectrometry (AAS/MAS). For this, the molecule formation of CaF was studied, which is used for the indirect analytical determination of fluorine in high-resolution continuum source graphite furnace molecular absorption spectrometry (HR-CS-GFMAS). The kinetics of this reaction was established by monitoring its molecular spectrum at different atomisation temperatures. An Arrhenius plot showed a pseudo-first order reaction with respect to fluorine (n = 1). An intermediate state was isolated, and its structure was elucidated by spectroscopic methods: scanning electron microscopy with energy dispersive X-ray spectroscopy (SEMEDX), X-ray photoelectron spectroscopy (XPS), X-ray absorption spectroscopy (XANES and EXAFS), and Raman microspectroscopy. We propose here a mechanism, where ZrO2 acts as a heterogeneous catalyst: after a pyrolytic step, an intermediate state of ZrO(OCaF) is activated, and at higher temperatures, CaF(g) is released from the zirconium-coated graphite surface. No evidence of the formation of zirconium carbide was found. Consequently, as the CaF formation is catalysed by a heterogeneous catalyst, surface modifications with ZrO2 nanoparticles and ZrO xerogels were investigated in order to increase the surface area. Their influence was evaluated in the molecule formation of CaF, CaCl, CaBr, and CaI. Graphite furnace modification with zirconium oxide nanoparticles proves to be the best choice for fluorine analysis with a signal enhancement of more than eleven times with respect a non-coated graphite furnace. However, the influence of zirconium modifications in the analytical signals of Cl, and I is lower than the F signals or even negative in case of the Br. Understanding zirconium modifiers as heterogeneous catalysts offers a new perspective to AAS and MAS, and reveals the potential of surface analytical methods for development of improved permanent modifiers and graphite furnace coatings.
Zirconium chloro fluoride as catalyst for C-F bond activation and HF transfer of fluoroalkanes
(2023)
In this work, we successfully synthesized amorphous zirconium chloro fluoride (ZCF), which exhibits medium lewis acidity. In addition to investigating the local coordination sphere around the Zr atoms and the material properties, we were able to establish a catalytic behavior of ZCF in C-F bond activation reactions. We present a heterogeneous catalyst that performs dehydrofluorination of a fluoroalkane and consecutive hydrofluorination of an alkyne at room temperature.
The datasets from (Hard Energy) X-ray photoelectron spectroscopy, X-ray diffraction and Scanning Electron Microsopy are related to the publication
G. Chemello, X. Knigge, D. Ciornii, B.P. Reed, A.J. Pollard, C.A. Clifford, T. Howe, N. Vyas, V.-D. Hodoroaba, J. Radnik
"Influence of the morphology on the functionalization of graphene nanoplatelets analyzed by comparative photoelectron spectroscopy with soft and hard X-rays"
Advanced Materials Interfaces (2023), DOI: 10.1002/admi.202300116.
Detailed study of multicomponent systems in solid-state as well as in solution using X-ray diffraction and X-ray spectroscopy is one of the most common topics in modern materials chemistry. 5-6 component high-entropy alloys such as fcc- and bcc-structured AlxCoCrFeNi and fluorescent nanoparticles based on fluorite-structured SrF2 doped by rare-earth metals in organic solutions have high complexity and their local structure cannot be resolved using only diffraction. X-ray absorption spectroscopy should be applied to understand peculiarities in their local structure and make a link between structure on short and long ranges and their macroscopic properties. Here, based on two representativee examples, we discuss how a combination of several X-ray absorption edges might give new insights into complex materials.
Sehr geehrte Damen und Herren,
liebe Leserinnen und Leser,
bereits im ersten Band der N.i.Ke. Schriftenreihe des Netzwerks zur interdisziplinären Kulturerhaltung hatte ich angeführt, dass bei der Untersuchung von kulturellen Artefakten naturwissenschaftliche Untersuchungsmethoden zunehmend an Bedeutung gewinnen, sie eigentlich unverzichtbar geworden sind.
Ein besonders einprägsames Beispiel dieser fächerübergreifenden Zusammenarbeit zwischen Geisteswissenschaften, Naturwissenschaften und Restaurierungswissenschaften war die Ausstellung Johannes Vermeer. Vom Innehalten, die in diesem Jahr in der Gemäldegalerie Alter Meister in den staatlichen Kunstsammlungen Dresden gezeigt wurde. Eigens für diese Ausstellung wurde das Gemälde Brieflesendes Mädchen am offenen Fenster einer grundlegenden Restaurierung unterzogen. Diese Restaurierung diente jedoch nicht nur der Reparatur des Bildes. Um sich dem ursprünglichen Zustand des Gemäldes zwischen 1657 und 1659 anzunähern, wurden später hinzugefügte Malschichten großflächig abgenommen. Möglich wurde dies durch unterschiedliche, bildgebende materialwissenschaftliche Untersuchungen im Vorfeld, welche die wissenschaftlichen Grundlagen für die Diskussion über den weiteren Umgang mit der Lesenden schufen.
Materialanalytische Verfahren wurden und werden ständig weiterentwickelt und optimiert. Sei es, um aus einer Vielzahl von Einzelmessungen ein Gesamtbild zu erstellen, oder die Größe einer Probenentnahme so zu reduzieren, dass von einer „minimal-invasiven“ oder „quasi nicht-invasiven“ Untersuchung ausgegangen werden kann. Nun feiert die Bundesanstalt für Materialforschung und -prüfung, zusammen mit ihren Vorgängerinstitutionen, den königlichen Versuchsanstalten, in diesem Jahr ihren einhundertfünfzigsten Geburtstag. Sie blickt damit auf eine lange Tradition materialwissenschaftlicher Analysen zurück, an deren Beginn beispielsweise die metallographischen Untersuchungen von Adolf Martens stehen. Derartige Untersuchungen bilden auch heute noch einen wesentlichen Bestandteil archäometallurgischer Forschung. Die Historie bzw. die Weiterentwicklung der Methodik lässt sich hier besonders gut nachzeichnen. Jedoch blicken auch Verfahren zur Charakterisierung weiterer Werkstoffe, wie Glas, Keramik, oder organischer Materialien auf eine lange Geschichte zurück.
Die in diesem Band der N.i.Ke.-Schriftenreihe präsentierten Beiträge dokumentieren einerseits aktuelle Forschungsarbeiten, die erst in diesem Jahr in entsprechenden Fachjournalen publiziert wurden, andererseits liegen einige der Arbeiten bereits 50 Jahre zurück. Sie bekunden damit nicht nur die materialtechnologische und historische Bandbreite der Projekte, sondern offenbaren die Vielfältigkeit kulturhistorischer oder restauratorischer Fragestellungen, zu deren Beantwortung natur- und materialwissenschaftliche Forschung wesentliche Beiträge liefern können.
Ich bedanke mich bei allen Kolleginnen und Kollegen, die zur Erstellung dieser dritten Ausgabe der N.i.Ke. Schriftenreihe des Netzwerks zur interdisziplinären Kulturerhaltung beigetragen haben. Ihre Aufsätze ermöglichen den Blick in die Vielfältigkeit materialwissenschaftlicher Untersuchungen im Bereich Kunst- und Kulturgut. Ich wünsche Ihnen viel Spaß auf dieser kleinen Zeitreise.
Mechanochemistry is an effective, environmentally benign, and facile method for the synthesis of new multicomponent crystal systems. Different milling parameters are known to affect the mechanisms and rates of product formation: milling frequency, milling time, filling degree of the milling jar, ball diameter and vessel size, degree of milling ball filling, and material of jars. The increasing interest in mechanochemistry is contrasted by a limited mechanistic understanding of the mechanochemical reactivity and selectivity.
Different analytical methods and their combinations have been developed for the time resolved in situ monitoring of mechanochemical transformations, including powder X-ray diffraction, X-ray adsorption spectroscopy, NMR, Raman spectroscopy, and thermography.
Here we will discuss our recent results investigating the formation of (poly-morphic) cocrystals[1,3], metal-organic compounds, and salts, thereby elucidating the influence of milling parameters and reaction sequences on the formation mechanism and kinetics. For the mechanochemical chlorination reaction of hydantoin normalizing the kinetic profiles to the volume of the milling ball showed clearly that milling reaction kinetics are conserved. Here physical kinetics dominate reaction rates in a ball-milling transformation. Attempting to interpret such kinetics in purely chemical terms risk misinterpreting the results.
Our results indicate that time-resolved in situ investigation of milling reactions offer a new approach to tune and optimize mechanochemical processes.
The definition of the term “conversion” is discussed for a variety of polymer syntheses. It is demonstrated that in contrast to organic and inorganic chemistry several different definitions are needed in polymer science. The influence of increasing conversion on structure and topology of homo- and Copolymers is illustrated. Chain-growth polymerizations, such as radical polymerization or living anionic polymerizations of vinyl monomers, condensative chain polymerization, two and three-dimensional step-growth polymerizations, ring–ring or chain–chain equilibration and chemical modification of polymers are considered.
View into the depths of copolymer microstructure by a special approach of LC-MS data evaluation
(2019)
It is a well-known story that copolymers beside their molar mass distribution (MMD) can exhibit a functionality type distribution (FTD), a copolymer composition distribution (CCD), a monomer sequence distribution (MSD) and additionally different topologies within one sample. This is and will remain a challenge for analysts.
First a very short overview will be given concerning the common liquid separation techniques for polymers (SEC, LAC, LCCC, GELC) coupled to soft ionization mass spectrometric methods like MALDI and ESI-MS with focus on their limitations. For very broadly distributed samples or chemical very similar species the superposition of different separation mechanisms in chromatography is unavoidable or the separation efficiency cannot be optimized.
Different ionization probabilities and species of the same nominal mass with completely different structures are just two problems of mass spec of complex polymer mixtures.
Subsequently, different examples will be shown how these limitations in some cases could be outsmarted.
First example will be the separation of statistical EO-PO copolymers of different chemical compositions by end group functionality and the quantification of end group fractions over the whole CCD. Here an UP-LCCC / ESI-TOF-MS coupling is applied.
Further for different kinds of polymers it will be shown how it could be realized to obtain information on small isobaric/isomeric topological heterogeneities by coupling UP-SEC / ESI-TOF-MS.
All results are based on the data processing of reconstructed ion chromatograms of single mass traces of complex ESI-MS spectra.
Using solid catalysts in disulfide-based dynamic combinatorial solution- and mechano-chemistry
(2022)
We here show for the first time that solid amines can act as catalysts for disulfide-based dynamic combinatorial chemistry by ball mill grinding. The mechanochemical Equilibrium for the two disulfide reactions studied is reached within one to three hours using ten different amine catalysts. This contrasts with the weeks to months to achieve solution equilibrium for most solid amine catalysts at 2%M at 2mM concentration in a suitable solvent. The final mechanochemical equilibrium is independent of the catalyst used, but varies with other ball mill grinding factors such as the presence of traces of solvent. The different efficiencies of the amines tested are discussed.
Use of the solvent-free mechanochemical method for a sustainable preparation of pharmaceuticals
(2023)
With the growing interest in environmental issues on the part of governments and institutions, pharmaceutical industries are asked to reduce their environmental footprint. Given the major impact related to the use of solvents, the development of methodologies less solvent demanding is nowadays even more urgent. In light of that, mechanochemistry would be a suitable solvent-free technology since it promotes the activation of the chemical reactions between (generally) solid materials via inputs of mechanical energy. Since such reactions may occur outside the kinetic and thermodynamic rules of conventional solution chemistry, the main limit of mechanochemistry is the poor mechanistic understanding of the solid-state transformations involved, which is still hindering a widespread use of the method, as well a scale-up to the industrial level. However, the development of methods for real-time monitoring of the mechanochemical reactions enables obtaining (in)accessible information on reaction intermediates, new products, or reaction time, thus getting closer to a better understanding of the mechanistic behaviour. With the rules of this chemistry becoming increasingly clear, the new reaction pathways of mechanochemistry wouldn’t represent a limit anymore, but an asset, that may lead to lot of opportunities for the pharmaceutical industry.
High entropy alloys (HEAs) are considered as a new class of alloys containing at least 5 elements with concentrations between 5 and 35 atomic percent. There has been a growing interest in HEAs in the material research field in recent years. Due to their adjustable composition, which enables the modifications of mechanical properties (such as hardness, strength and ductility etc) and their stability at high temperatures, HEAs have been the focus of various studies.
Especially the corrosion behavior of HEAs has been a wide research interest. Since the grazing exit X-ray fluorescence (GEXRF) offers a non-destructive way to collect notable information regarding the high temperature oxidation, we consider it as a useful method to investigate how HEAs behave in corrosive environments.
The main idea of grazing geometry is to enhance the fluorescence signal of the surface. This enables highly sensitive surface analyses of thin protective film on surface in sub-micrometer scale. Position-sensitive area detectors provide information regarding the signal emitted from the sample as a function of emission angle and thus allow depth-sensitive analysis. Furthermore, the data collected from samples of an incidence energy which lays within a specific energy range provides XANES data to determine oxidation states. Moreover, since GEXRF profiles can also be simulated through physical models (Urbach 1999), they enable us to determine the layer thickness of a given sample in a non-destructive way.
In this contribution, we present the preliminary results of a conceptual study regarding layer properties of CrCoNi medium entropy alloy. The successful implementation of such methodological concept will pave the way for the investigation of more complex alloys with multiple layers, which is planned for the later phases of the project.
High entropy alloys (HEAs) are considered as a new class of alloys containing at least 5 elements with concentrations between 5 and 35 atomic percent. There has been a growing interest in HEAs in the material research field in recent years. Due to their adjustable composition, which enables the modifications of mechanical properties (such as hardness, strength and ductility etc) and their stability at high temperatures, HEAs have been the focus of various studies.
Especially the corrosion behavior of HEAs has been a wide research interest. Since the grazing exit X-ray fluorescence (GEXRF) offers a non-destructive way to collect notable information regarding the high temperature oxidation, we consider it as a useful method to investigate how HEAs behave in corrosive environments.
The main idea of grazing geometry is to enhance the fluorescence signal of the surface. This enables highly sensitive surface analyses of thin protective film on surface in sub-micrometer scale. Position-sensitive area detectors provide information regarding the signal emitted from the sample as a function of emission angle and thus allow depth-sensitive analysis. Furthermore, the data collected from samples of an incidence energy which lays within a specific energy range provides XANES data to determine oxidation states. Moreover, since GEXRF profiles can also be simulated through physical models (Urbach 1999), they enable us to determine the layer thickness of a given sample in a non-destructive way.
In this contribution, we present the preliminary results of a conceptual study regarding layer properties of CrCoNi medium entropy alloy. The successful implementation of such methodological concept will pave the way for the investigation of more complex alloys with multiple layers, which is planned for the later phases of the project.
Ligand based modification has been performed to synthesize a pair of
mixed ligands d10 MOF based materials related to a previously published compound as a base material. The previous compound was a Zn(II)-MOF, {[Zn(4-bpdh)(H2dht)](MeOH)(H2O)}n (1) [N,N′-bis(1-pyridin-4-yl-ethylidene)hydrazine = 4-bpdh and 2,5-dihydroxyterephthalic acid = H4dht], which is a five-fold interpenetrated framework and highly dynamic in nature. In the first synthetic modification, the central metal is replaced by Cd(II), which has the same framework formula as the base material, but this is a rigid compound and also there is no interpenetration in the framework. In the second modification, along with the metal center, the 4,4′- coordinating N,N′-donor ligand is replaced by an isomeric 3,3′-coordinating N,N′- donor linker. In this compound, the dynamism is regenerated. The dynamic nature can be realized by the extensive PXRD studies and characteristic “step-shaped” gas/solvent adsorption behavior for CO2, water, and ethanol. Furthermore, all these 3D MOFs show excited-state intramolecular proton transfer phenomena and water sensing properties in different organic solvents. Here excitingly, the ease of water sensing property is directly related to the dynamic behavior of the framework which has been studied thoroughly in terms of structural correlation.
Unintended Rate Enhancement in Mechanochemical Kinetics by Using Poly(methyl methacrylate) Jars
(2022)
Time-resolved in situ (TRIS) X-ray diffraction has changed how mechanochemical transformations are studied but requires the use of X-ray transparent jars often made from poly(methyl methacrylate) (PMMA). However, using PMMA jars can alter the apparent kinetics of mechanochemical polymorphism by an order of magnitude, questioning the interpretability of established TRIS methods. Our results suggest that rate enhancement in PMMA jars may not be dominated by chemical effects of the polymer, but rather a result of different equilibrium temperatures within the jar. These features must be better understood before control over mechanochemical reactions can be achieved.
The transformation of a base-catalyzed, mechano-assisted Knoevenagel condensation of mono-fluorinated benzaldehyde derivatives (p-, m-, o-benzaldehyde) with malonodinitrile was investigated in situ and in real time. Upon milling, the para-substituted product was found to crystallize initially into two different polymorphic forms, depending on the quantity of catalyst used. For low catalyst concentrations, a mechanically metastable phase (monoclinic) was initially formed, converting to the mechanically stable phase (triclinic) upon further grinding. Instead, higher catalyst concentrations crystallize directly as the triclinic product. Inclusion of catalyst in the final product, as evidenced by mass spectrometric analysis, suggests this complex polymorphic pathway may be due to seeding effects. Multivariate analysis for the in situ Raman spectra supports this complex formation pathway, and offers a new approach to monitoring multi-phase reactions during ball milling.
We here explore how ball-mill-grinding frequency affects the kinetics of a disulfide exchange reaction. Our kinetic data show that the reaction progress is similar at all the frequencies studied (15–30 Hz), including a significant induction time before the nucleation and growth process starts. This indicates that to start the reaction an initial energy accumulation is necessary. Other than mixing, the energy supplied by the mechanical treatment has two effects: (i) reducing the crystal size and (ii) creating defects in the structure. The crystal-breaking process is likely to be dominant at first becoming less important later in the process when the energy supplied is stored at the molecular level as local crystal defects. This accumulation is taken here to be the rate-determining step. We suggest that the local defects accumulate preferentially at or near the crystal surface. Since the total area increases exponentially when the crystal size is reduced by the crystal-breaking process, this can further explain the exponential dependence of the onset time on the milling frequency.
Mechanochemistry emerges as a potent, environmentally friendly, and straightforward approach for crafting novel multicomponent crystal systems. Various milling parameters, including milling frequency, time, filling degree of the milling jar, ball diameter, vessel size, degree of milling ball filling, and material of jars, are recognized influencers on the mechanisms and rates of product formation. Despite the growing interest in mechanochemistry, there exists a gap in understanding the mechanistic aspects of mechanochemical reactivity and selectivity. To address this, diverse analytical methods and their combinations, such as powder X-ray diffraction, X-ray absorption spectroscopy, NMR, Raman spectroscopy, and thermography, have been developed for real-time, in situ monitoring of mechanochemical transformations.
This discussion centers on our recent findings, specifically investigating the formation of (polymorphic) cocrystals and metal-organic frameworks. Through these studies, we aim to unravel the impact of milling parameters and reaction sequences on the formation mechanism and kinetics. Notably, in the mechanochemical chlorination reaction of hydantoin, normalizing kinetic profiles to the volume of the milling ball unequivocally demonstrates the conservation of milling reaction kinetics. In this ball-milling transformation, physical kinetics outweigh chemical factors in determining reaction rates. Attempting to interpret such kinetics solely through chemical terms poses a risk of misinterpretation. Our results highlight that time-resolved in situ investigations of milling reactions provide a novel avenue for fine-tuning and optimizing mechanochemical processes.