Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Dokumenttyp
- Vortrag (3)
- Zeitschriftenartikel (1)
- Dissertation (1)
- Posterpräsentation (1)
Sprache
- Englisch (6)
Schlagworte
- PEG (6) (entfernen)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (3)
Functional sequences of precision polymers based on thiolactone/Michael chemistry are identified from a large one-bead one-compound library. Single-bead readout by MALDI-TOF MS/MS identifies sequences that host m-THPC that is a second Generation photo-sensitizer drug. The corresponding Tla/Michael-PEG conjugates make m-THPC available in solution and drug payload as well as drug release kinetics can be fine-tuned by the precision segment.
Phage display is used to find specific target binding peptides for polypropylene (PP) surfaces. PP is one of the most commonly used plastics in the world. Millions of tons are produced every year. PP binders are of particular interest because so far gluing or printing on PP is challenging due to its low surface energy. A phage display protocol for PP was developed followed by Next Generation DNA Sequencing of the whole phage library. Data analysis of millions of sequences yields promising peptide candidates which were synthesized as PEG conjugates. Fluorescence-based adsorption-elution-experiments show high adsorption on PP for several sequences.
Peptide-polymer bioconjugates combine oligopeptides with synthetic polymer blocks and can be used for various applications in material sciences. In recent years, bioconjugates were applied as compatibilizers and coatings. Biocombinatorial approaches, such as phage display, have been shown to yield strong binding peptides, which exhibit excellent coating properties as peptide-PEO conjugates. Phage display represents a widely exploited strategy to select peptides or proteins that exhibit highly specific affinity to various substrates. Following a phage display experiment, DNA sequencing of binding phage clones is required in order to get the sequence information of the binding peptides. Traditionally, random clone picking followed by Sanger sequencing was applied. However, this method may not necessarily identify the strongest binding clones. Next-generation sequencing made sequencing of whole phage libraries possible, which highly improved the selection of strong binders. Here, we show that the biocombinatorial method of phage display combined with next generation DNA sequencing of whole phage libraries represents a powerful tool for an application in material chemistry. Phage display is used to find specific target binding peptides for polypropylene surfaces (PP). PP binders are of particular interest because thus far gluing or printing on PP is challenging due to its low surface energy. Scripts for sequence data analysis were developed and promising sequences were synthesized as peptide-PEO conjugates. Fluorescence based adsorption experiments on PP surfaces led to the identification of strong binding sequences and a better understanding of the peptide-surface interactions.
The reduced size of nanoparticles (diameter < 100 nm) confers them high specific surface areas and permeability through many biological pathways resulting in high interaction with biological systems. Therefore, in the recent years, nanoparticles (NPs) have increasingly found many applications in biomedical research. Herein, silica-based NPs are among the most promising candidates for biomedical studies due to their relative low toxicity and the possibility of functional variability. The main focus of this thesis work has been the synthesis and characterisation of novel hybrid NPs with enhanced properties for biomedical studies. More specifically, suppression of protein adsorption and achievement of highly fluorescent NPs in serum-rich media are well focused. First, a chemical strategy for the preparation of highly fluorescent silica nanoparticles by covalent attachment of Alexa dyes and subsequent shielding by an additional pure silica shell is well presented. These nanoparticles were investigated by Dynamic light scattering (DLS), Transmission electron microscopy (TEM) and fluorescence spectroscopy, the latter includes determination of absolute fluorescence quantum yields of such scattering suspensions with an integrating sphere setup and the assignment of fluorescence intensity values. At low shelling extension core-shell fluorescent silica nanoparticles show smooth surfaces and high quantum yields, even comparable to those for free dyes. However, by increasing the amount of shell precursor, nanoparticle surfaces show raspberry morphologies and decay of the quantum yields. Secondly, two different types of novel silica-poly(ethylene glycol) hybrid nanoparticles (H- SiO2-PEG and G- SiO2@PEG) have been synthesized by use of the same polymer precursor: Here the influence of concentration of the polymer precursor poly(ethylene glycol) methyl ether-3-(triethoxysilyl) propyl urethane (mPEG-IPTES) on the particle properties was scrutinised. For polymer grafted NPs, the concentration of polymer precursor increases the PEG density and the hydrophobicity of the NPs surface. On the other hand, for condensated NPs, the polymer precursor influences the size, but not the density of polymer chains on the NPs surface, which indicates that PEG on the surface of the NPs effectively reduces the adsorption of Bovine serum albumin (BSA). Finally, the influence of polymer length on the ability to repel BSA adsorption onto nanoparticles is reported. SNPs@PEG with different molecular weights (mPEG: 350, 2000 and 5000 g/mol) were synthesized by nucleophilic substitution of tosylated mPEG to aminated silica nanoparticles (chemical grafting). The resulted hybrid nanoparticles were consistently characterized by DLS, TEM, Fourier transform infrared spectroscopy (FTIR), Thermogravimetric analysis (TGA) and X-ray photoelectron spectroscopy (XPS). BSA at different concentrations were used as a model protein to study the protein-corona formation after adsorption onto the pristine and modified nanoparticles (SNPs@PEG). For pristine SNPs and SNPs@PEG (MW = 350 g/mol), zeta potential at different incubation times (0, 24 and 48 h) show a dynamic evolution of the nanoparticle-protein corona. Conversely, for SNPs@PEG with MW ≥ 2000 g/mol, a significant suppression of corona formation and time evolution was observed. In resume, protein corona is strongly influenced by the adsorption inhibition of PEG surfaces.
The surface chemistry / functionalization of nanomaterials and microparticles largely controls the stability of these materials as well as their solubility and subsequent biofunctionalization and their interactions with biological systems. Moreover, in the case of some nanomaterials like semiconductor quantum dots or lanthanide-based upconversion nanocrystals, the ligand shell strongly affects their optical properties, e.g., via passivation of surface states and traps that favor luminescence quenching or the protection of surface atoms from quenching water molecules. This renders analytical methods for the quantification of surface groups like functionalities very important. Targets of broad interest are here amino, carboxyl, alkine and maleimide groups used for common bioconjugation reactions and typical ligands like thiols and polyethylene glycol (PEG) molecules of varying length, used for the tuning of material hydrophilicity and biocompatibility, minimization of unspecific interactions, prevention of biofouling, and enhancement of blood circulation times as well as surface-bound biomolecules like streptavidin or other biomolecules relevant e.g., for diagnostic assays. Here, we focus on simple optical methods relying on standard laboratory instrumentation, validated by method comparison and/or mass balances and present examples for their use for the characterization of different types of nanomaterials and microparticles.
Luminescence-based detection methods, ranging from fluorescence spectroscopy for photophysical and mechanistic studies over sensing applications, chromatographic separation techniques and the microarray technology with fluorescence detection to fluorescence microscopy, flow cytometry, single molecule spectroscopy, and molecular imaging to integrating sphere spectroscopy, are among the most widely used methods in the life and material sciences. This is due to e.g., their unique sensitivity enabling the detection of single molecules, potential for multiplexing, ease of combination with spatial resolution, and suitability for remote sensing. Many of these advantages are closely linked to the choice of suitable molecular and nanoscale fluorescent reporters, typically required for signal generation. This includes organic dyes without and with sensor function, fluorophore-encoded polymeric and silica nanoparticles as well as nanocrystalline systems like semiconductor quantum dots and upconversion phosphors, emitting in the visible (vis), near-infrared (NIR), and IR (infrared). Current challenges present the environment sensitivity of most fluorophores, rendering fluorescence spectra, measured intensities/fluorescence quantum yields, and fluorescence decay kinetics matrix-dependent, and instrument-specific distortions of measured fluorescence signals that need to be considered for quantification and comparability of data, particularly fluorescence spectra.
Here, current applications of luminescence-based methods and different types of reporters will be presented. In this context, suitable spectroscopic tools for the characteri-zation of the optical properties of fluorescent reporters and fluorophore-encoded microparticles, analytical tools for the determination of the surface chemistry of different types of particles, and different multiplexing strategies will be discussed.