Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Erscheinungsjahr
Dokumenttyp
- Buchkapitel (68) (entfernen)
Schlagworte
- Baustoffe (4)
- Archaeometry (3)
- Druckfestigkeit (3)
- Lehmsteinmauerwerk (3)
- Nanoparticle (3)
- Standards (3)
- Superplasticizer (3)
- Additive Fertigung (2)
- Adobe masonry (2)
- Bemessung (2)
- Broadband dielectric spectroscopy (2)
- Femtosecond laser (2)
- Flame retardancy (2)
- Flash DSC (2)
- Ink analysis (2)
- Interdisciplinary approach (2)
- Korrosion (2)
- Laser ablation (2)
- Laser-induced periodic surface structures, LIPSS (2)
- Lehmbau (2)
- Mechanical behaviour (2)
- Mechanische Eigenschaften (2)
- Microstructures (2)
- Nanocomposite (2)
- Nickel-base superalloys (2)
- Polymer (2)
- Silica beads (2)
- 2D nanoparticle (1)
- AFM (1)
- APTES (1)
- Accelerator (1)
- Additive manufacturing (1)
- Adhesion (1)
- Adobe (1)
- Advanced Materials (1)
- Alloy 36 (1)
- Alloy modification (1)
- Alterung (1)
- Alumina (1)
- Aluminum Titanate (1)
- Ankerauszugsversuch (1)
- Antiquity (1)
- Application (1)
- Arc welding (1)
- Aryl phosphate (1)
- Atemschutz (1)
- Aufbau von Festkörpern (1)
- Außenschutzverglasung (1)
- Beanspruchung (1)
- Blends (1)
- Boehmite (1)
- Bone implant (1)
- Book production (1)
- Bronzeguss (1)
- Bruch (1)
- Bruchmechanik (1)
- Building Materials (1)
- Calcium phosphate coating (1)
- Capillary waves (1)
- Carrier excitation (1)
- Carrier gas hot extraction (1)
- Cement paste (1)
- Certified reference material (1)
- Chemical corrosion (1)
- Chemische Analyse (1)
- Climate responsive materials (1)
- Codex Miscellaneus (1)
- Columnar and equiaxed structures (1)
- Compositionally complex alloys (1)
- Conductivity (1)
- Coptic (1)
- Coptic studies (1)
- Corrosion (1)
- Corrosion testing (1)
- Creep (1)
- Creep, Creep Rupture, and Stress Rupture (1)
- Creep-resistant steel (1)
- Cryogenic temperature (1)
- Cultural Heritage protection (1)
- Dead Sea Scrolls (1)
- Defects (1)
- Dendritic growth (1)
- Dielectric spectroscopy (1)
- Differential scanning calorimetry (1)
- Diffraction (1)
- Digitale Bildverarbeitung (1)
- Direct energy deposition (1)
- Discotic liquid crystals (1)
- Dispersion (1)
- Distribution of nanoparticles (1)
- Double-pulse (1)
- Druck (1)
- Druckversuch (1)
- Durability (1)
- Dye (1)
- Dynamics (1)
- Elasticity (1)
- Electrochemical corrosion (1)
- Endurance testing (1)
- Engine combustion (1)
- Engine performance (1)
- Epoxi nanocomposites (1)
- Epoxy nanocomposites (1)
- Exfoliation (1)
- Experimental tests (1)
- Fatigue crack propagation (1)
- Fatigue crack propagation stagesdefects (1)
- Fatigue life (1)
- Fatigue strength (1)
- Femtosecond (1)
- Feuchte (1)
- Feuchteabhängige Festigkeit (1)
- Filled rubbers (1)
- Filled thermosets and plastics (1)
- Flammability (1)
- Flaschenventile (1)
- Fluorescence (1)
- Fracture mechanics (1)
- Free electron laser (1)
- Friction (1)
- Gas Barrier Properties (1)
- Gas solubility (1)
- Gefügeuntersuchung (1)
- Glas (1)
- Glasmalereien (1)
- Gleichgewicht (1)
- Graphene (1)
- Handbook (1)
- Heißrisssicherheit (1)
- High entropy alloys (1)
- High pressure oxygen (1)
- High-temperature corrosion (1)
- Historical Buildings (1)
- Historical Developments (1)
- Human health G. (1)
- Hydrocarbons (1)
- Hydrogen (1)
- Hydrogen assisted cracking (1)
- Hydrogen diffusion (1)
- IEQ (1)
- Ignition source (1)
- Imaging (1)
- Implants (1)
- In situ NDE (1)
- In situ monitoring (1)
- Incident research (1)
- Ink (1)
- Innovation (1)
- Interfacial forces (1)
- Interferometer (1)
- Interphase (1)
- Ionic Liquids (1)
- Ionic liquids (1)
- Ions (1)
- Kaltrisssicherheit (1)
- Keramik (1)
- Klimamessungen (1)
- Korrosionsschutz (1)
- Kreislaufwirtschaft (1)
- Kristallsystem (1)
- LCC (1)
- Lanthanide (1)
- Laser arc-hybrid welding (1)
- Laser powder bed fusion (1)
- Laser processing (1)
- Laser-induced fixation (1)
- Laser-induced periodic surface structures (LIPSS) (1)
- Lattices (1)
- Lehm (1)
- Lehmmauermörtel (1)
- Lehmmauerwerk (1)
- Lehmsteine (1)
- Life cycle assessment (LCA) (1)
- Liftetime (1)
- Loch- u. Spaltkorrosion (1)
- Low Cycle Fatigue (LCF) (1)
- Low-tech approach (1)
- Lubricant (1)
- Luftschadstoffe (1)
- MVT-Test (1)
- Machine Learning (1)
- Manuscript making (1)
- Manuscripts (1)
- Masterbatch (1)
- Materialkreislauf (1)
- Materialprüfung (1)
- Materials in space (1)
- Mauerwerk (1)
- Mechanical Properties (1)
- Metall (1)
- Microcracking (1)
- Mikro-CT (1)
- Mikrostrukturuntersuchung (1)
- NIR (1)
- Nanocomposites (1)
- Nanocrystal (1)
- Nanodielectrics (1)
- Nanostrcutures (1)
- Nanostructure (1)
- Nanostructures (1)
- Neutron Diffraction (1)
- Neutron imaging (1)
- Neutron radiography (1)
- Nonmetallic material (1)
- Normen (1)
- Normung (1)
- Numerical simulation (1)
- Oxidation (1)
- Oxides (1)
- Oxygen pressure surge (1)
- PC/ABS (1)
- Palaeography (1)
- Peroxy-fuels (1)
- Phase equilibria (1)
- Plasma (1)
- Plasma-transferred arc welding (1)
- Plasticity (1)
- Polymer composites (1)
- Polymer-based nanocomposites (1)
- Post NDE (1)
- Preservation (1)
- Prüfung (1)
- Prüfverfahren (1)
- Pump-probe experiments (1)
- Quantum dot (1)
- Quantum yield (1)
- Reference material (1)
- Referenzmaterial (1)
- Referenzorganismus (1)
- Referenzverfahren (1)
- Reinforcement (1)
- Relaxation tests (1)
- Resource efficiency (1)
- Rheological properties (1)
- Rheology (1)
- Ridis amorphous fraction (1)
- Rigid amorphous fraction (1)
- Rod-like liquid crystals (1)
- Rubber (1)
- SCC (1)
- Schadenskunde (1)
- Schadenstoleranz (1)
- Schubversuch (1)
- Selective Laser Melting (SLM) (1)
- Semiconductor (1)
- Sensor (1)
- Separation membranes (1)
- Setting (1)
- Silica (1)
- Sintermechanismen (1)
- Social life cycle assessment (SLCA) (1)
- Sol-gel coating (1)
- Spannungsrisskorrosion (1)
- Specific heat spectroscopy (1)
- Spectroscopy (1)
- Statische Druck- und Schubbeanspruchung (1)
- Surface chemistry (1)
- Surface functionalization (1)
- Surface integrity (1)
- TEKKEN-Test (1)
- TGA-MS (1)
- Talc (1)
- Tauchen (1)
- Technische Keramik (1)
- Teilsicherheitsbeiwert (1)
- Temparatur modulated Flash DSC (1)
- Temperature effect (1)
- Temperature modulated DSC (1)
- Test procedures (1)
- Thermography (1)
- Thermomechanical Fatigue (TMF) (1)
- Thermophysikalische Eigenschaften (1)
- Thin film (1)
- Time-resolved scattering (1)
- Titanium alloy (1)
- Tribologie (1)
- Ultrasonic-assisted milling (1)
- Ungleichgewicht (1)
- Upconversion (1)
- Ventile (1)
- Verbundwerkstoff (1)
- Versagensmechanismen (1)
- Wasserstoff (1)
- Wear (1)
- Werkstoffauswahl (1)
- Werkstoffeigenschaften (1)
- Werkstoffkennwerte (1)
- Werkstoffmechanische Prüfung (1)
- Werkstoffprüfung (1)
- Writing Ink (1)
- X-ray Computed tomography (1)
- X-ray diffraction (1)
- X-ray refraction radiography (1)
- X-ray scattering (1)
- Zerstörungsfreie Prüfung (1)
- Zuverlässigkeit (1)
- Zuverlässigkeitstheorie (1)
- historical earthen building (1)
- material characterisation (1)
- natural ventilation (1)
- numerische Modellierung (1)
- rammed earth (1)
- static monitoring (1)
Organisationseinheit der BAM
- 5 Werkstofftechnik (10)
- 7 Bauwerkssicherheit (9)
- 6 Materialchemie (8)
- 4 Material und Umwelt (7)
- 5.2 Metallische Hochtemperaturwerkstoffe (7)
- 4.5 Kunst- und Kulturgutanalyse (5)
- 6.6 Physik und chemische Analytik der Polymere (5)
- 9 Komponentensicherheit (5)
- 6.2 Material- und Oberflächentechnologien (3)
- 7.4 Baustofftechnologie (3)
A new titanium alloy improving the operation of implants additively manufactured and including laterally closed lattice structures is proposed. The new alloy possesses an increased affinity to the bone. The measured bone–interface implant (BII) of less than 10 mm and bone–implant contact (BIC) of 95% demonstrated an excellent osseointegration. Furthermore, since additive manufacturing naturally leads to a high-roughness surface finish, the wettability of the implant is increased. The combination of these factors is pushing ossification beyond its natural limits. In addition, the quality and speed of the ossification and osseointegration in/around laterally closed lattice implants open the possibility of bone spline key of prostheses. This enables the stabilization of the implant into the bone while keeping the possibility of punctual hooks allowing the implant to be removed more easily if required.
Ancient Inks
(2023)
In the last decade scientists and scholars have accumulated more knowledge on black ink used for writing in Antiquity and the early Middle Ages.
Ready availability of non-destructive testing instruments employed in interdisciplinary projects on historic manuscripts have made it possible to determine the composition of ink and to compare it with the extant records.
The current state of preservation of the DSS results from the synergetic effect of various factors such as great age, post-discovery treatments, poor storage conditions, environmental influences and exhibitions. With rare exceptions, neither the initial state nor a list of the treatments performed on each DSS fragment is known. Reconstruction of the individual fragment history will have to rely upon advanced analytical techniques to identify the treatments and their effects.
Management of the scrolls may be divided roughly into three periods: a) the scholarly archiving period, from 1948 to the mid-1960s; b) first attempts at conservation, from the mid-1960s to late-1980s; c) Israel Antiquities Authority Scrolls Lab, from 1991 onwards.
Only the nano-scaled structure of the nanocomposite and the dispersion of nanoparticles within the polymer matrix harbor multifunctional potential including superior fire retardancy. Thus, this chapter focuses on the dispersion of nanoplates, based mainly on studies of layered silicates and graphene/graphene-related nanoplates. The nanostructure and properties of the nanocomposites are dependent mainly on thermodynamic and kinetic factors during preparation. Improving nano-dispersion often directly improves flame retardancy. Therefore, the modification of the nanoplates as well as the preparation of nanocomposites becomes very important to control this dispersion. The dispersion of nanoplates functions as a prerequisite for the formation of an efficient protective layer, changing the melt flow and dripping behavior, or the improvement of the char properties.
We discuss the non-linear stress–strain behavior of microcracked polycrystalline ceramics under uniaxial tension and compression (displacement control).
Micromechanics explanation and modeling of its basic features, such as non-linearity and hysteresis in stress–strain curves, are developed, with stable microcrack propagation and “roughness” of intergranular cracks playing critical roles in tension and crack sliding playing a critical role in compression. Experiments involving complex loading histories are explained, and themodel is shown to reproduce the basic features of the observed stress–strain curves.
Lehmmauerwerk bietet sich aufgrund seiner zahlreichen ökologischen Vorteile für die Errichtung klimafreundlicher und ressourcenschonender Gebäude an. Um den Anwendungsbereich tragenden Lehmmauerwerks durch eine zeitgemäße Nachweisführung zu erweitern, werden in diesem Beitrag Grundlagen für die Entwicklung eines eurocodekonformen Bemessungskonzepts erarbeitet. Hierzu werden die Ergebnisse umfangreicher experimenteller Untersuchungen an Lehmmauerwerk sowie Lehmsteinen und -mörteln nach Konditionierung bei unterschiedlichen Klimata vorgestellt. Darauf aufbauend erfolgt eine Traglastanalyse druckbeanspruchter Lehmmauerwerkswände mittels numerischer und analytischer Methoden. Die daraus gewonnenen Erkenntnisse werden abschließend in einen an DIN~EN~1996-3/NA angelehnten Bemessungsvorschlag überführt, welcher die materialspezifischen Besonderheiten von Lehmmauerwerk berücksichtigt und eine fundierte Grundlage für eine wirtschaftliche und zuverlässige Nachweisführung darstellt.
Irradiation of solid surfaces with intense ultrashort laser pulses represents a unique way of depositing energy into materials. It allows to realize states of extreme electronic excitation and/or very high temperature and pressure and to drive materials close to and beyond fundamental stability limits. As a consequence, structural changes and phase transitions often occur along unusual pathways and under strongly nonequilibrium conditions. Due to the inherent multiscale nature—both temporally and spatially—of these irreversible processes, their direct experimental observation requires techniques that combine high temporal resolution with the appropriate spatial resolution and the capability to obtain good quality data on a single pulse/event basis. In this respect, fourth-generation light sources, namely, short wavelength and short pulse free electron lasers (FELs), are offering new and fascinating possibilities. As an example, this chapter will discuss the results of scattering experiments carried out at the FLASH free electron laser at DESY (Hamburg, Germany), which allowed us to resolve laser-induced structure formation at surfaces on the nanometer to submicron length scale and in temporal regimes ranging from picoseconds to several nanoseconds with sub-picosecond resolution.
Surface nanostructures provide the possibility to create and tailor surface functionalities mainly via controlling their topography along with other chemical and physical material properties. One of the most appealing technologies for surface functionalization via micro- and nanostructuring is based on laser processing. This can be done either via direct contour-shaping of the irradiated material using a tightly focused laser beam or in a self-ordered way that allows employing larger laser beam diameters along with areal scanning to create a variety of laser-induced periodic surface structures (LIPSS). For the latter approach, particularly ultrashort pulsed lasers have recently pushed the borders across long-lasting limitations regarding the minimum achievable feature sizes and additionally boosted up the production times. This chapter reviews the plethora of recently investigated applications of LIPSS—for example, via imposing diffractive or plasmonic structural colors, the management of liquids and surface wetting properties, biomedical and bioinspired functionalities, beneficial effects in tribology for reducing friction and wear, the manipulation of optical scattering and absorption in photovoltaics, or the modification of magnetic or superconducting surface properties in other energy applications. The footprint of the LIPSS-based technology is explored in detail regarding the current state of industrialization, including an analysis of the market and associated LIPSS production costs.
Nickel-Iron-Alloy Modification to Enhance Additively Welded Microstructure for Subsequent Milling
(2022)
The aerospace industry uses nickel–iron alloys, e.g., FeNi36, to create moulding tools for composite materials, since these alloys have a low coefficient of thermal expansion. Nickel–iron alloys are hard-to-cut materials. The moulding tools are large in size and involve complex structures, making them cost-intensive and difficult to manufacture. Thus, the focus is set on additive manufacturing, which can additionally enable the repair of components in order to eliminate local defects. However, the process usually results in a heterogeneous microstructure and anisotropic mechanical properties. As there is a high demand for a precise and exact fit of the precision moulds and the surface quality, the welded components must be subsequently machined. Additionally, inhomogeneous microstructure may lead to unstable cutting forces and conditions. Consequently, a modification of the microstructure morphology is achieved through specific alloy modifications in order to stabilise and improve the subsequent machining process. Therefore, titanium and zirconium are chosen as modification elements with a maximum 1% weight percent and are added to nickel–iron alloy powder. The elements are alloyed, and build-up welded by plasma-transferred-arcwelding. The resulting microstructure morphology of the welded wall structure and the machining properties are then determined. It can be shown that titanium has a significant effect on the structural morphology of the welded layers, as well as on the machining.
Epoxy-Based Nanocomposites—What Can Be Learned from Dielectric and Calorimetric Investigations?
(2022)
Epoxy-based nanocomposites are promisingmaterials for industrial applications (i.e., aerospace, marine, and automotive industries) due to their extraordinary mechanical and thermal properties. Regardless of the broad field of applications, there is still a considerable need to identify their structure–property relationships. Here, a detailed dielectric and calorimetric (DSC and fast scanning calorimetry) study on different epoxy-based nanocomposites was performed. Bisphenol A diglycidyl ether (DGEBA) cured with diethylenetriamine (DETA) was employed as the polymeric matrix, which was reinforced with three diverse nanofillers that exhibit different interaction strengths with the epoxy matrix (halloysite nanotubes, surface modified halloysite nanotubes, and taurine-modified layered double hydroxide). The structure, molecular mobility, and vitrification behavior are discussed in detail, focusing on the intrinsic structural and dynamic heterogeneity, as well as interfacial properties.
The chapter gives a brief introduction to (nano)compositecomposite materials having the focus on polymer-based nanocomposites. The different dimensionalities of nanoparticles are introduced, along with their distribution in the matrix.
Different application fields of polymer-based nanocomposites, like flame retardancy, filled rubbers, nanofilled thermosets and thermoplastics, separation membranes and nanodielectrics, are considered in greater detail.
The characterization of the mechanical properties and behaviour of adobe masonry is fundamental for the understanding of the structural behaviour of adobe constructions. Thus, in the last decades, experimental studies focused on this topic have been carried out by different authors. Many of the existing experimental works, however, were carried out aiming to support broader studies focused on the seismic behaviour of adobe constructions and are not very detailed. Moreover, authors tend to adopt different procedures in their experimental work, since there are few indications in existing standards for testing adobe masonry. The wide variety in materials used, both for the adobes and mortars, further complicates this work, making it difficult to compare results obtained in different studies. This chapter provides an overview of the indications given by standards and other technical recommendations for the mechanical testing of adobe masonry. It presents a review of existing research on the mechanical behaviour of adobe masonry, addressing studies that focus on: (i) compression behaviour, (ii) shear behaviour, (iii) joint shear behaviour. It provides a global analysis of the existing knowledge, suggesting improvements for normative documents and identifying future Research needs.
The mechanical characterization of adobe bricks is an important first step in the study of the behaviour of adobe masonry. For this reason, in the last decades, different authors have conducted research on the mechanical behaviour of adobes from various regions of the world. Despite the importance of mechanical characterization, there are still only a few standards and normative documents with clear indications for the mechanical testing of earthen materials and, in general, These indications are not thorough and vary among different countries. Consequently, authors tend to adopt different types of test specimens and procedures in their experimental work, thus obtaining results that are not directly comparable. The fact that the materials and procedures traditionally used are also not standardized,varying greatly from region to region, also contributes to the difficulty of comparing results from different studies. This chapter presents a review of the indications provided by codes, standards and other technical recommendations for the mechanical testing of adobe bricks, as well as a detailed review of procedures adopted, and results obtained by different authors regarding the mechanical characterization of traditional adobe bricks. This chapter focuses, in particular, on the behaviour of adobe bricks when subjected to simple compression. It provides an overview of the existing knowledge and identifies needs for future research and development.
Laser-induced periodic surface structures (LIPSS) are a universal phenomenon and can be generated on almost any material by irradiation with linearly polarized radiation. This chapter reviews the current state in the field of LIPSS, which are formed in a “self-ordered” way and are often accompanying materials processing applications. LIPSS can be produced in a single-stage process and enable surface nanostructuring and, in turn, adaption of optical, mechanical, and chemical surface properties. Typically, they feature a structural size ranging from several micrometers down to less than 100 nm and show a clear correlation with the polarization direction of the light used for their generation. Various types of LIPSS are classified, relevant control parameters are identified, and their material-specific formation mechanisms are analyzed for different types of inorganic solids, i.e., metals, semiconductors, and dielectrics. Finally, technological applications featuring surface functionalization in the fields of optics, fluidics, medicine, and tribology are discussed.
Whilst a decisive role of the particle-matrix interphase on the mechanical properties of nanoparticle-filled polymers has been demonstrated in the last years, the arbitrary design of this interphase remains a very challenging goal. In principle, this could be realized via an appropriate surfacemodification of the nanofiller prior to its incorporation in the polymer. For most systems, such as for boehmite nanofillers, however, the interaction of organic modifiers with the particle surface has not been studied in detail, and only single studies are known rather than systematic investiga- tions on the effects of different chemical functions anchored on the particle surface. In this chapter, we present an extensive study on the binding of APTES, a common silane surface modifier, with boehmite, and show that thermogravimetric analysis (TGA) coupled with mass spectrometry (MS) is a convenient and highly suitable method to elucidate the ligand binding in detail. Furthermore, a two-step coupling strategy is presented, demonstrating that based on APTES anchored to the parti- cle surface, the condensation of various carboxylic acids can be utilized to enable highly diverse chemical properties of the nanofillers, which leads to very different particle-matrix interactions in the nanocomposites.
The large number of TEM investigations and the regular microstructure
of single-crystal nickel-base superalloys has boosted the development of a number of physically motivated constitutive laws. In contrast to the more phenomenological models discussed in the next chapter, these models use dislocation densities as internal variables. Obvious advantages are that the computed densities can be compared to TEM observations and the Deformation mechanisms can be easier translated into mathematical equations.
The elastic constants are the most basic mechanical properties of a material and are needed for any structural analysis of a component. For example, they have a major influence on the eigenfrequencies of vibrating parts. Single crystals of Ni-base superalloys are strongly anisotropic, which means that the observed properties are orientation dependent. Tensor algebra is then required to mathematically formulate the elastic properties and their relations to the crystal orientation. Hence, this chapter first summarizes some basic definitions and calculation rules for Rotation matrices, including the definition of the Euler angles, which are most commonly used to define the relative orientations of the crystal and the component. Parts of this chapter closely follow the lines of the excellent exposition of the topic by Olschewski.
High-temperature corrosion is a widespread problem in various industries.
As soon as a hot and reactive gas (CO2, O2, H2O, SO2, NOx, etc.) is in contact with a solid, physico-chemical processes at the surface and interfaces lead to material degradation. The processes are dynamic and controlled by thermodynamic and kinetic boundary conditions. Whether a reaction product is protective or not depends on various factors, such as chemical composition of the solid and the reactive media, surface treatment as well as diffusion and transport paths of cations and anions. Resulting chemical and structural inhomogeneities with the corrosion layers are characterized by off stoichiometry within cationic and anionic sub lattices. The competitive processes can be studied by various techniques of applied crystallography.
This chapter gives an overview on the challenges of chemical-structural Analysis of reaction products by crystallographic methods such as X-ray diffraction and X-ray near-edge structure spectroscopy and scanning electron microscopy electron backscatter diffraction (SEM-EBSD) for corrosion science.
If a component is cyclically loaded, its load carrying capacity is considerably lower than in the monotonic loading case. This general observation applies in particular to L-PBF parts. The causes of this are mainly material defects such as pores and unwelded regions (Chapter 8) and a pronounced surface roughness in the as-built condition (Chapter 9). In addition, effects due to the anisotropy of the microstructure (Chapter 6) and a complex residual stress pattern (Chapter 7) play an important role. A consequence is that common strategies of fatigue assessment cannot be transferred to L-PBF applications without modifications. Due to the inhomogeneity of the material, the determination of representative material properties and the transfer to the component is a problem, and this is also the case with regard to the consideration of defects, surface roughness and residual stresses. The chapter gives a brief introduction to these problem areas.
In this chapter, the current state-of-the-art of in situ monitoring and in situ NDE methods in additive manufacturing is summarized. The focus is set on methods, which are suitable for making statements about the quality and usability of a component currently being manufactured. This includes methods which can be used to determine state properties like temperature or density, other physical properties like electrical or thermal conductivity, the microstructure, the chemical composition, the actual geometry, or which enable the direct detection of defects like cracks, voids, delaminations, or inclusions. Thus, optical, thermographic, acoustic, and electromagnetic methods, as well as methods being suitable for investigating particle and fume emission are presented. The requirements of in situ monitoring methods with a focus on thermographic methods are discussed by considering different additive manufacturing processes like laser powder bed fusion (PBF-LB/M) and direct energy deposition (DED-LB/M). Examples of the successful implementation and applications of such monitoring methods at BAM are given. The in situ monitoring and NDE methods are compared against post-process NDE methods. The advantages and challenges of in situ methods concerning real-time data analysis and the application of AI algorithms are addressed and discussed.