Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Erscheinungsjahr
- 2019 (6) (entfernen)
Dokumenttyp
- Vortrag (4)
- Zeitschriftenartikel (1)
- Beitrag zu einem Tagungsband (1)
Referierte Publikation
- nein (6)
Schlagworte
- Electronic Detonators (2)
- Explosivstoffe (2)
- Harmonised Standards (2)
- Marktüberwachung (2)
- On-site mixed Explosives (2)
- Standardisation (2)
- Technical Specification (2)
- AdCo Explosives (1)
- Coal dust (1)
- Explosionsgefährliche Eigenschaften (1)
Organisationseinheit der BAM
- 2.4 Prüfung und Bewertung von Explosivstoffen/Pyrotechnik (6) (entfernen)
Eingeladener Vortrag
- nein (4)
Bei der Explosion in einer Herstellungsstätte für ein Pulver zur Reinigung industrieller Feuerungsanlagen in Deutschland ist eine Person tödlich verunglückt. Die BAM wurde gebeten, beschlagnahmte Muster des Reinigungspulver zu bewerten. Dafür wurden verschiedene Untersuchungen durchgeführt. Diese sollten klären, ob die stoffliche Einstufung des Reinigungspulvers in die Stoffklasse 5.1 für die sichergestellten Pulverproben zutreffend ist. Es konnte nachgewiesen werden, dass die untersuchten Pulverproben explosionsgefährliche Eigenschaften aufweisen. Die von explosionsgefährlichen Stoffen ausgehenden Gefährdungen müssen ermittelt und bei der Herstellung und Verwendung berücksichtigt werden. Die Gefährdungen sind entsprechend neu eingeführter sicherheitstechnischer Kennzahlen ermittelt und anschließend klassifiziert worden. Die Klassifizierung erfolgte durch die Zuordnung zu einer s.g. Gefahrgruppe.
Bei der Marktüberwachung im Bereich Explosivstoffe und Pyrotechnik stehen die Behörden der Länder immer wieder vor dem Problem, mit ausreichenden Kenntnissen über die Vielfalt der Produkte ausgestattet zu sein. Darüber hinaus lassen sich nur in seltenen Fällen im Rahmen der Marktüberwachung Prüfungen mit der regulären Funktion des Explosivstoffs oder der Pyrotechnik durchführen. Dadurch konzentriert sich die Überwachung vor allem auf äußere Merkmale und die Kennzeichnung. In dem Vortrag werden anhand von Beispielen die technischen und rechtlichen Hintergründe für entsprechende Kontrollen dargestellt und mit den Erfahrungen der an der Marktüberwachung Beteiligten abgeglichen.
Since the early drafting of the European standards for civil explosives, harmonised under directive 93/15/EEC and 2014/28/EU, blasting technology has developed notably. This is particularly evident for electronic detonators and electronic firing systems, and the EU commission agreed to initiate a standardisation initiative, also noting that the currently existing document on electronic detonators is “only” a Technical Specification (CEN/TS). This paper addresses the current activities in the area of standardisation. The EU is about to launch a formal standardisation request to cover the most recent technological developments not addressed by the current standards. The request would also include various adjustments of references to the new Directive for civil explosives, and in addition the task of developing a Technical Specification for on-site mixed explosives and corresponding manufacturing units. The latter has been included to address the nowadays frequently found mobile production on the basis of ammonium nitrate prills or emulsions.
Several decades have passed since the initial drafting of the European standards for explosives subject to European Directive 2014/28/EU, and this field as experienced some substantial technical innovations. While at the turn of the millenium the concept of electronic detonators had just been conceived, and it is mentioned in a Technical Specification, today electronic detonators exist in many variants, also regarding communication means between shotfirer and the detonating cap. Questions regarding safe functioning and prevention of inadvertent ignition have to be asked in a quite different way, where delicate electronic circuits are used, and where information is transmitted by radio waves. In addition, the safety of functioning is partly found in software components and the corresponding standards need to be reviewed thoroughly on these grounds.
A different but in recent times more and more popular technology, is the on-site production of explosives, being mostly emulsion explosives, ANFO, or combined products. Also here software in the machinery is starting to play an important role. The on-site produced explosive must fulfil safety requirements and has to be, in addition, quality controlled. This cannot solely be left to the hopefully proper design of the software and machinery, but needs to be made accessible to verification. Since this area seems broader in approach, it is not going to be addressed by a new standard. The state of the art technology shall be described in a Technical Specification with a perspective from requirements of the above mentioned European Directive.
Permitted explosives have a tradition of many decades in Germany and had been designed to the needs of the underground coal mining in the Ruhr. In neighboring countries of Germany similar provisions were made to prevent hazards from fire damp and coal dust explosions in underground coal mines. Due to the termination of coal mining in Germany and most other European countries, also the testing facilities are disappearing. This presentation outlines the current situation of testing regimes and facilities.
During a European convention of the authorities for market surveillance (AdCO) for explosives the activities of the notified bodies are presented, putting a focus on matters concerning market surveillance.
The presentation outlined in detail, which verifications are possible
with explosives, while practical tests involving initiation of
explosives are excluded. Elements of labeling and the conclusions in
view of quality control were explained, and typical failures by
manufacturers to comply were orally described.