Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Erscheinungsjahr
- 2018 (38) (entfernen)
Dokumenttyp
- Beitrag zu einem Tagungsband (38) (entfernen)
Schlagworte
- Niobium carbide (8)
- Wear (7)
- Friction (6)
- Hydrogen (5)
- Welding (5)
- NbC (4)
- Additive Manufacturing (3)
- Fe3Al (3)
- Cobalt (2)
- Creep-resistant steel (2)
- Hardness (2)
- Machining (2)
- Mechanical properties (2)
- Microstructure (2)
- PEEK (2)
- Residual stress (2)
- Semi-finishing (2)
- Sintering (2)
- Solidification cracking (2)
- Tribology (2)
- Turning (2)
- 316L (1)
- 9%Ni steel, (1)
- AISI 304L (1)
- Abrasion (1)
- Alternative Kraftstoffe (1)
- Alumina (1)
- Aluminum (1)
- Austenitic stainless steel (1)
- Binder (1)
- CFD-model (1)
- CNG (1)
- Carbonitride (1)
- Cemented carbide (1)
- Cermet (1)
- Co (1)
- Conventional Ni-based austenitic welding electrode (1)
- Coolant-free (1)
- Crater wear (1)
- Critical strain (1)
- Cryogenic steel (1)
- Cryogenic temperature (1)
- Cutting tool (1)
- Cutting tools (1)
- DLC (1)
- Edge effects (1)
- Eigenspannungen (1)
- Elektromagnetische Schmelzbadunterstützung (1)
- FE-model (1)
- Ferritic welding electrode (1)
- Ferromagnetischer Stahl (1)
- Flank (1)
- Fracture toughness (1)
- Grain growth (1)
- HSLA steel (1)
- Hard metal (1)
- Hard tungsten (1)
- Hard-turning (1)
- Hardmetal (1)
- Hartstoffphasen (1)
- Heat treatment (1)
- High-strength steel (1)
- Hochfester Feinkornbaustahl (1)
- Hot Cracks (1)
- Hot steam (1)
- Hybrid-laser-arc welding (1)
- Hydrogen concentration (1)
- IN718 (1)
- In situ strain (1)
- Inserts (1)
- Interrupted milling (1)
- Iron-based alloys (1)
- Kaltriss (1)
- LNG (1)
- LTT (1)
- LTT Weld Filler Materials (1)
- Large-scale test (1)
- Laser Metal Deposition (1)
- Laser beam welding (1)
- Laser welding (1)
- Laser- und Lichtbogenenergie (1)
- Laser-Pulver-Auftragschweißen (1)
- Laser-beam welding, (1)
- Laser-metal-deposition (1)
- Laser-plasma hybrid (1)
- Laserimplantation (1)
- Laserstrahlschweißen (1)
- Lichtbogensensorik (1)
- Lubricated sliding (1)
- MAG Prozesssteuerung (1)
- MAG-Schweißen (1)
- MSG-Engspaltschweißen (1)
- Machinability (1)
- Metal (1)
- Metal matrix composite (1)
- Neutron diffraction (1)
- Neutron imaging (1)
- Nickel (1)
- Numerical simulation (1)
- Oberflächenmessung (1)
- Optical measurement (1)
- PTFE composites (1)
- Plasma-transferred-arc (1)
- Polymer composites (1)
- Polymerkomposite (1)
- Post Weld Heat Treatment (PWHT) (1)
- Profilvermessung (1)
- Properties (1)
- Residual Stresses (1)
- Residual stresses (1)
- SLM printed plasma torch (1)
- SMAW (1)
- SPS (1)
- Schweißen (1)
- Schwingfestigkeit (1)
- Selective Laser Melting (1)
- Selective laser melting (1)
- Sensorik (1)
- Solubility (1)
- Stainless Steel (1)
- Statistische Versuchsplanung (1)
- Steel (1)
- Strain rate (1)
- Stress Relief Cracking (SRC) (1)
- Stress corrosion cracking (1)
- Temperature (1)
- Temperature behavior (1)
- Tensile strength (1)
- ToF-SIMS (1)
- Toughness (1)
- Trockenreibung (1)
- Tungsten carbide (1)
- Verschleißbeständigkeit (1)
- WC (1)
- Weld pool geometry (1)
- X-ray diffraction (1)
- carrier gas hot extraction (1)
- µCT-analysis (1)
Organisationseinheit der BAM
- 9 Komponentensicherheit (38) (entfernen)
The wear rates of self-mated alumina couples show that friction as well as wear is largely determined by the above-mentioned hydro-thermal conditions. The presence of water and its amount available in the surrounding system either in liquid or in gaseous form plays a key role for friction and wear behavior and can be beneficial for the tribological profile of steam degradation resistant materials. Hot steam enhances the tribo-chemical formations of oxides and hydroxides on MgO-ZrO2 alumina and antimony impregnated carbon.
The present work deals with Niobcarbid (NbC). Strategic reflections on tungsten carbide and more and more stringent toxicological restrictions for cobalt associated for both with spiraling stock market prices have attracted recently some attention for Niobium carbide as a substitute for tungsten carbide in machining.
Investigations on weldability often deal with hot cracking as one of the most prevalent failure mechanisms during weld fabrication. The modified varestraint transvarestraint hot cracking test (MVT) is well known to assess the hot cracking susceptibility of materials. The shortcoming of this approach is that the information is only from the very near surface region which inhibits access to the characteristic of the hot crack network in the bulk. Here, we report about an alternative approach to monitor the entire 3D hot crack network after welding by means of microfocus X-ray computer tomography (µCT). However, to provide sufficient high spatial resolution small samples must be sectioned from the MVT-welded joint. The sampling is accompanied by local relaxation of the residual stress distributions that are induced by welding, which can have an impact on the crack volumes prior to the sampling. The studies were carried out to investigate the hot cracking susceptibility of low transformation temperature filler materials (LTT). As high compression residual stresses up to -600 MPa in the area of the crack networks were determined by means of the contour method, stress relaxation caused by sectioning for µCT sample extraction can affect the detectability of the cracks later on. X-ray diffraction studies revealed surface residual stress relaxations up to about 400 MPa due to cutting. To investigate this effect, the specimens with hot cracks were subjected to a load test with known stress states. The results clearly show that local stress relaxations will have a strong impact on the volume images reconstructed from tomography analysis. This effect must be considered during hot crack assessment on basis of µCT data.
Additive Manufacturing (AM) of metals has become industrially viable for a large variety of applications, including aerospace, automotive and medicine. Powder bed techniques such as Selective Laser Melting (SLM) based on layer-by-layer deposition and laser melt enable numerous degrees of freedom for the geometrical design. Developing during the manufacturing process, residual stresses may limit the application of SLM parts by reducing the load bearing capacity as well as induce unwanted distortion depending on the boundary conditions specified in manufacturing.
The residual stress distribution in the bulk of IN718 elongated prisms produced by SLM was studied non-destructively by means of neutron diffraction. The samples with different scanning strategies, i.e. hatching length, were measured in as-build condition (on a build plate) and after removal from the build plate.
The absolute values of all stress components decreased after removal from the build plate. Together with surface scan utilizing a coordinate-measuring machine (CMM), it is possible to link the stress release to the sample distortion. Obtained results indicated different residual stress states for each of the transversal, longitudinal and normal component depending on the thermal gradient in the respective direction.