Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Erscheinungsjahr
- 2012 (27) (entfernen)
Dokumenttyp
Schlagworte
- Flame retardancy (2)
- 100Cr6 (1)
- 15N2 (1)
- 3D-Formerkennung (1)
- ASP20212 (1)
- Acetic acid (1)
- Active Thermography (1)
- Air sampling (1)
- Aktive Thermografie (1)
- Alloy (1)
Eingeladener Vortrag
- nein (2)
Automotive brake pads consist of many components but it is still not entirely clear which role each of the elements of this complex composition plays to provide the specified regimes of sliding. This is due to the mutual interaction of multiscale mechanisms, realized during the friction.
In this work we have attempted to partly answer this question using computer simulations. Since the simulation allows us to consider various combinations of the structure of the system being simulated ceteris paribus, it becomes possible to understand the role of each constituent sequentially. The main attention is paid to the structure and composition of the thin film that forms on the surface of both bodies as a result of compaction of the wear product, its chemical composition and oxidation. This layer, also named a third body or friction film, differs in composition and microstructure from the two first bodies. We considered a single contact for the steady state sliding when the structure and composition of friction films already are formed. As a modelling tool we used the method of movable cellular automata, which has well proven itself in solving of such tasks. We investigated the influence of modification of the structure and composition of the third body on the features of system behaviour at friction. To assess the adequacy of the numerical model, experimental studies with an artificial third body were also carried out. The Simulation results are in good agreement with experimental data.
Several construction and building materials, including wood, glue and coatings, are possible sources of very volatile organic compounds (VVOCs) and volatile organic compounds (VOCs) like formic and acetic acid. Due to very high air tightness and very low air exchange rates in new buildings concentrations of these harmful substances can increase considerably. To minimize the risk, emissions from building products should be identified and quantified. With the common standard method, this means Tenax® sampling followed by thermal desorption and GC-MS analysis, these acids could not be detected sufficiently. The aim oft this study is the comparison of two different methods for the determination of acetic and formic acid. The sampling of method one, which is usually used for identification and quantification of VOCs, is done in accordance with ISO 16000-6 and ISO 16017-1 on Carbotrap® 202 multi-bed thermal desorption tube by subsequent identification and quantification with GC-MS. Method two is based on sampling on 2,4-dinitrophenylhydrazine (DNPH) cartridges, derivatisation, elution, identification and quantification of the derivatives with LC-MS/MS (liquid chromatography mass spectrometry/mass spectrometry).
Die Endlichkeit fossiler Brennstoffe und das steigende Umweltbewusstsein sind die immer stärker werdenden Motivationen für die Entwicklung von effizienteren Gasturbinen und Triebwerken zur Energieerzeugung oder zum Antrieb von Land-, Luft- und Seefahrzeugen. Eins der dafür entwickelten Konzepte ist das der thermischen Schutzschichten. Dabei kann durch den Auftrag einer keramischen Schicht die thermische Belastung der beschichteten Bauteile reduziert werden. In dieser Arbeit wird die Möglichkeit der Nutzung einer Laser-Thermoschock-Prüfeinrichtung zur Durchführung von thermo-zyklischen Versuchen an thermischen Schutzschichten untersucht. Die Probenerwärmung erfolgt hierbei durch einen fokussierten Laserstrahl, mit dem durch die gewählte Trajektoriengeometrie und Anpassung der Laserleistung eine homogene Temperaturverteilung auf der Oberflache erzeugt wird. Die für die Durchführung von zyklischen Versuchen notwendigen Erweiterungen der vorhandenen Prüfeinrichtung werden beschrieben, wozu die Entwicklung eines neuen Probenhalters und einer Test- und Auswerteroutine für die Experimente gehört. Zur Begutachtung der Entstehung und des Fortschritts von Schädigungen werden Schallemissionstechniken und thermografische Methoden eingesetzt, deren Möglichkeiten und Grenzen für die Nutzung im Rahmen der Experimente bestimmt werden. Außerdem umfasst die Arbeit eine umfassende temperaturabhängige Charakterisierung des für die thermische Schutzschicht verwendeten keramischen Materials. Hierbei ist besonders die Messung des E-Moduls mittels der dynamischen Resonanzmethode hervorzuheben, die eine selten genutzte Technik ist. Bei der Charakterisierung zeigen sich keine besonderen Abweichungen von den erwarteten Werten. Lediglich eine geringere Porosität als vom Hersteller erwartet und eine unveränderte Phasenzusammensetzung nach isothermer Auslagerung wurden beobachtet. Die bei den zyklischen Experimenten angestrebten Oberflächentemperaturen von über 1000 °C machen es nötig, die Absorption der Proben durch eine zusätzliche Beschichtung mit Magnetit zu erhöhen. Zur Messung der Temperaturverteilung auf der Probenoberfläche wird eine Infrarot- Kamera genutzt, die für diese Zwecke kalibriert wird. Die eingebaute aktive Druckluftkühlung der Probenruckseite erlaubt die Steuerung des Temperaturgradienten, besitzt aber noch Verbesserungspotenzial. Schon ohne aktive Kühlung der Proben ist ein Versuchsregime realisierbar, bei dem die thermischen Belastungen mit hoher Präzision reproduzierbar sind und mit dem die realen Einsatzbedingungen von keramischen Schutzschichten nachempfunden werden können. Die Entstehung und der Fortschritt von Schädigungen in Form von Delaminationen kann mit thermografischen Methoden und Schallemissionstechniken beobachtet werden. Bei der Ortung der Schallsignale zeigen sich die Grenzen der vorhandenen Ausrüstung. Eine relativ genaue Ortung der Quelle ist mit einer zeitaufwendigen manuellen Routine möglich, deren Ergebnis eine starke Abhängigkeit von der Signalqualität zeigt. Eine reduzierte Zonenortung mit einer automatischen Auswertung zeigt zufriedenstellende Ergebnisse. Eine Kombination der Ergebnisse der Zonenortung, der Analyse der Schallsignale und den thermografischen Analysen der Daten der Infrarot-Kamera ermöglicht eine sehr gute Visualisierung der Schädigungsentwicklung. Während erster Versuche konnten Delaminationsrisse in der keramischen Dammschicht erzeugt werden, die in der Nähe der Dammschicht-Haftschicht-Grenzschicht liegen. Dies entspricht einem Schadensbild, das durch eine hohe zyklische Belastung der Proben erreicht wird. Durch die Nutzung eines fokussierten Laserstrahls kommt es zu einer Temperaturüberhöhung im Bereich des Laserspots. Dies bewirkt, dass die thermozyklische Belastung der Proben noch um einen Thermoschockbeitrag erweitert wird.
Up to now only little knowledge has been recorded about the fire behavior and flame retardancy of wood-plastic composites (WPCs). The use of WPCs has increased continuously in recent years. Especially in their main field of application as a decking material, WPCs present a big share of the market. To date no flame-retarded solution has been introduced for WPC materials that fulfils the necessary requirements. But flameretarded materials are indispensable, especially for indoor use and the protection of escape routes. In this study basic knowledge about the fire behavior of WPCs is investigated first. Second, the effectiveness and mode of action of different flame-retardant additives is investigated. Special attention is drawn to products made of WPC material. Therefore WPC was further investigated in its main field of application as decking boards. The fire behavior of materials and products was investigated by means of cone calorimeter measurements as well as radiant panel tests. Furthermore numerical simulations were carried out to study the effects of various thermal material properties on burning behavior. Thermal decomposition was studied using thermogravimetric methods and spectroscopic investigations. Against this background, models for thermal decomposition pathways were built for combinations of WPC material with different flame retardants. WPCs show burning behavior similar to that of pure wood samples with an increased heat release rate due to polymeric fractions. It is shown that all investigated flame retardants had a positive effect on the burning behavior of WPCs. The best results were achieved by the flame retardants ammonium polyphosphate, Paxymer and expandable graphite. Especially in combination with red phosphorus, expandable graphite was highly effective because red phosphorus stabilized formed residue. Apart from the influence of flame retardants, other influencing factors like geometry and moisture content also played an important role concerning the flame retardancy of WPC decking boards. Indeed, hollow decking boards offer a reduced amount of combustible material, but their flame spread is increased in comparison to solid samples.