Ingenieurwissenschaften und zugeordnete Tätigkeiten
The susceptibility of different aggregate types used in concrete to ASR is strongly associated with their petrography. The aim of this study is to assess the influence of the aggregate size on the ASR potential, in particular applied to the sand fractions in the size range of 0.125-4 mm. The investigation concept is based on the hypothesis that at a specific particle size reactive aggregates could change their characteristic influence in mitigating ASR instead of promoting it. For the study of the size dependent behaviour mortars are prepared, considering aggregates of different reactivity, including very reactive, slow-late and quasi non-reactive types. The analysis is based on a stepwise substitution concept, in which mortars with a constant overall grain size distribution are compared, while only one size fraction of the non-reactive base aggregate is substituted by a reactive aggregate type of this specific size fraction. For the expansion experiments an accelerated mortar bar test (80°C, immersed in NaOH solution) was applied. The results show that the slow-late reactive greywacke yielded a strong reduction of the expansion below an aggregate size in the range of 0.5-1 mm. On the other side with the very reactive borosilicate glass, the expansions increased steadily with decreasing size. To validate if the acquired expansions were caused by ASR, thin sections were analysed. Mainly, higher expansion values were consistent with extensively more amounts of ASR indicators.
Die Notwendigkeit und Nachfrage von zerstörungsfreien Prüfverfahren für Beton, die schnell scannend automatisiert große Messflächen abtasten können, wird zunehmend größer. Ein großes Potential bietet das Ultraschallecho-Verfahren, mit dem sich eine Vielzahl von baupraktischen Fragestellungen bei der Überprüfung des Bauwerkszustandes beantworten lassen. Durch Verwendung luftgekoppelter Ultraschallprüfköpfe (ACU-Prüfköpfen), die berührungslos über das zu untersuchende Betonbauteil geführt werden, könnte dieses Ziel erreicht werden. In der vorliegenden Arbeit wird die Machbarkeit von luftgekoppeltem Ultraschallecho (ACU- Echo) an Betonbauteilen von 20 cm Dicke gezeigt. Um den Einfluss der Parameter auf die Wellenausbreitung zu studieren, werden experimentelle Untersuchungen von ACU-Echo an speziellen Plexiglas- und Betonprobekörpern durchgeführt. Dabei kommt auf der Empfangsseite auch ein Laservibrometer zum Einsatz. Mit dessen Hilfe wird die Wellenausbreitung des eingetragenen Luftultraschalls im Beton visualisiert. Durch eine besondere digitale Signalbearbeitung können verschiedene Wellenarten voneinander getrennt und interpretiert werden. Mit den gewonnenen Ergebnissen wird ein Scanner für ACU-Echo-Messungen aufgebaut, mit dem weitere wesentliche Erkenntnisse gewonnen werden und ein erstes praxisorientiertes Anwendungsbeispiel demonstriert wird.