Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Dokumenttyp
- Posterpräsentation (52) (entfernen)
Schlagworte
- Additive manufacturing (10)
- Additive Manufacturing (9)
- Hydrogen (6)
- Residual stress (5)
- Thermography (5)
- Welding (4)
- 316L (3)
- Additive Fertigung (3)
- Computed tomography (3)
- ProMoAM (3)
- Residual Stress (3)
- X-ray diffraction (3)
- AM (2)
- Adaptives Schweißen (2)
- AlSi10Mg (2)
- Deuterium (2)
- Digitalisierung (2)
- Fatigue (2)
- Heat treatment (2)
- Hot stamping (2)
- L-PBF (2)
- LMD (2)
- Laser Powder Bed Fusion (2)
- Laser beam melting (2)
- Laser beam welding (2)
- Laser implantation (2)
- Laser metal deposition (2)
- Low Cycle Fatigue (2)
- Microstructure (2)
- NDT (2)
- Neutron Diffraction (2)
- Neutron diffraction (2)
- Online Process Monitoring (2)
- PBF-LB/M (2)
- Powder Bed Fusion (2)
- Selected Laser Melting (2)
- Surface integrity (2)
- Ti-6Al-4V (2)
- ToF-SIMS (2)
- Tool wear (2)
- Ultrasonic-assisted milling (2)
- AGIL (1)
- AISI 304L (1)
- Acoustic Emission (1)
- Additive surface treatment (1)
- Analytical solution (1)
- Artefact (1)
- Austenitic stainless steel (1)
- Austenitic stainless steels (1)
- Austenitic steel (1)
- Bragg-edge (1)
- Bremsbeläge (1)
- Camera (1)
- Carrier gas hot extraction (1)
- Cermets (1)
- Chemical composition (1)
- Cold Spray (1)
- Columnar crystal growth (1)
- Component test (1)
- Computed Tomography (1)
- Contact resonance (1)
- Crack propagation (1)
- Creep-resistant steel (1)
- Cutting tool (1)
- Cyclic R-curve (1)
- DED-L (1)
- Digitalization (1)
- Eigenspannung (1)
- Eigenspannungen (1)
- Fatigue Crack Growth (1)
- Fatigue crack growth (1)
- Flüssigmetallversprödung (1)
- Force distance curves (1)
- Friction (1)
- Füllgradregelung (1)
- Gleeble (1)
- Heißzug (1)
- High Cycle Fatigue (1)
- High Temperature Testing (1)
- High-strength steels (1)
- Hochfester Feinkornbaustahl (1)
- Hollow specimen (1)
- Hydrogen assisted cracking (1)
- Image processing (1)
- Implant-Test (1)
- In situ measurement, (1)
- In-situ (1)
- In718 (1)
- Iron aluminides (1)
- Kaltrissprüfung (1)
- L-PBF 316L (1)
- LIBS TIG welding (1)
- LPBF (1)
- Large scale test (1)
- Large-scale test (1)
- Laser powder bed fusion (1)
- Lichtbogensensorik (1)
- Liquid Metal Embrittlement (1)
- Longitudinal Wave (1)
- Low cycle fatigue (1)
- Lubricants (1)
- MSG-Engspaltschweißen (1)
- Melt pool behaviour (1)
- Metallsulfide (1)
- Micro computed tomography (1)
- Neutron (1)
- Neutronbeugungsverfahren (1)
- Niobium carbide (1)
- Niobium carbide (NbC) (1)
- Open data (1)
- Open science (1)
- Optical Emission Spectroscopy (1)
- Optical Tomography (1)
- Partial penetration (1)
- Photoresist (1)
- Polymers (1)
- Position detection (1)
- Prozessmonitoring (1)
- Prozessregelung (1)
- Qualitätssicherung (1)
- Radiological inspections (1)
- Repair (1)
- Reproducibility (1)
- Research data management (1)
- Round robin (1)
- SIMS (1)
- SLM (1)
- Schweißdatenmanagement (1)
- Slow Strain Rate Testing (1)
- Speed of sound (1)
- Stainless Steel (1)
- Submerged arc welding (1)
- Surface modification (1)
- Surface texturing (1)
- TEKKEN-Test (1)
- Temperature (1)
- Tensile Properties (1)
- Test procedure (1)
- Texture (1)
- Titanium (1)
- Tool steel (1)
- Tribological behavior (1)
- Tribologie (1)
- Ultrasonic Transducer (1)
- Ultrasonic assisted milling (1)
- Vernetzte Produktion (1)
- Waiting time (1)
- Wear (1)
- Widerstandpunktschweißen (1)
- X-ray Diffraction (1)
- additive manufacturing (1)
- high-resolution camera (1)
- hybrid repair (1)
- position detection (1)
- powder bed fusion of metals utilizing a laser beam (1)
Organisationseinheit der BAM
- 9 Komponentensicherheit (52) (entfernen)
Components in aircrafts are usually replaced when critical defects are present.
An alternative approach is repairing using gas dynamic cold spraying: metal particles are shot at a surface at supersonic speeds to selectively rebuild damaged material. Compared to other material-deposition techniques, its advantage is the small thermal impact on the component, preserving its mechanical properties.
Component-repair can save considerable amounts of energy and resources. However, its industrial application at large scale needs reproducible, good repair-material properties to guarantee a safe component life. The aim of this project is the development of safe, automatized repair-procedures considering the mechanical fatigue properties of the repair.
Offshore wind turbines (OWT) are a key factor of the sustainable energy generation of tomorrow. The continuously increasing installation depths and weight of the OWTs require suitable foundation concepts like monopiles or tripods. Typically, mild steels like the S420ML are used with plate thicknesses up to several hundreds of mm causing high restraints in the weld joints. Due to the large plate thickness, submerged arc welding (SAW) with multiple wires is the state-of-the-art welding procedure. As a result of the very high stiffness of the construction, a certain susceptibility for time-delayed hydrogen-assisted cracking (HAC) may occur. The evaluation of crack susceptibility is very complex due to the component size and stiffness of real offshore structures. For this purpose, a near-component test geometry was developed to transfer the real stiffness conditions to laboratory (i.e., workshop) scale. The investigated mock-up, weighing 350 kg, comprised heavy plates (thickness 50 mm, seam length 1,000 m) joined by a 22-pass submerged arc weld. Additional stiffeners simulated the effect of high restraint or shrinkage restraint of the weld. Extreme scenarios of hydrogen absorption during welding were simulated via the use of welding fluxes in dry (HD < 5 ml/100g Fe) and moisture condition (HD > 15 ml/100g Fe). The residual stresses were determined by a robot X-ray diffractometer. Areas of critical tensile residual stress (at the level of the yield strength) were found in the weld metal and heat affected zone. To identify possible delayed cracking, the welds were tested by phased array ultrasonic testing (PAUT) after 48 h. Summarized, no significant occurrence of HAC was detected, indicating the high crack resistance of the welded joint, i.e., a suitable combination of base material, welding consumable and welding parameters.
Wear behavior of innovative niobium carbide cutting tools in ultrasonic-assisted finishing milling
(2023)
The resources of niobium exceed the ones of tungsten by an order of magnitude. With 92%, Brazil is today the main global producer of niobium. Hence, niobium carbides (NbC) are a sustainable and economic alternative to conventionally used cutting materials, especially tungsten carbides (WC). Moreover, NbC can be used in Ni alloy matrix and thus offer significant advantages by substituting WC in Co matrix as cutting materials in terms of health risks and raw material price and supply risk. Based on recent studies which found an increased performance of NbC compared to WC cutting tools in machining higher strength steels, the composition NbC12Ni4Mo4VC was chosen for finish machining of a high-strength steel S960QL in this study. The experiments were carried out on an ultrasonic-assisted 5-axis milling machine using NbC tools specially made to benchmark them with commercially available coated WC cutting inserts. In addition, the influence of a coating system for the NbC inserts is tested and evaluated for its performance in the cutting process. Tool wear and cutting force analyses are implied to identify optimal parameter combinations as well as tool properties for the novel NbC tool. Together with the oscillation of ultrasonic-assisted milling, the loads on the component surface and the tool can be reduced and the wear behavior of the novel NbC tool can be refined. These milling tests are accompanied by standardized wear tests, i.e., pin-on-disc, between the aforementioned material combinations, and the results are correlated with each other. Finally, the behavior when using hard-to-cut materials such as Ni alloys, or innovative materials such as iron aluminide is also being tested, as these are constantly in the focus of machining optimization. With this strategy, comprehensive knowledge is achievable for future efficient application of NbC for milling tools, which have already been researched for decades using WC.
The long-term global goals of achieving almost net zero carbon emissions in the next decades are closely linked to the development of highly efficient components in plant, process and energy engineering, and their sustainable and resource-saving production. Plant components must increasingly withstand tribological loads in addition to high thermal, mechanical, and corrosive stresses. Such combined stresses demand high-performance alloys economically tailored to the application for wear protection and components produced as semi-finished products, via additive manufacturing (AM) or claddings via deposition welding. For instance, the protection of special components made of less cost-intensive materials, e.g., steel in process engineering for screw machines or exhaust gas separation, is feasible applying cost-intensive Ni- or Co-based hard-phase claddings.
Today an increasing number of above-mentioned applications demand precise finishing machining of components to ensure defined compact surfaces with a high integrity and complex contours. Contour milling is standard process for finishing machining of metals. Especially, the desired properties of wear resistant materials (e.g., high strength, hard precipitations) imply significant challenges for milling processes and tools, leading frequently to uneconomic milling conditions due to intolerable high tool wear and surface defects. Inhomogeneous, anisotropic weld structures due to cladding or AM of wear resistance alloys lead to further deteriorations of milling processes due to unstable milling conditions and process forces during chip removal.
To tackle these challenges, already several approaches exist, (1) to enhance machinability of the claddings by alloy modifications to specifically influence solidification and hard phases morphology (precipitation shape, size, distribution) and (2) to achieve significant improvements of the machining situation (e.g., increase of tool life and surfaces integrity) by means of modern hybrid machining processes such as ultrasonic-assisted milling. This contribution shows a comprehensive overview of recent results with these promising approaches for additively welded Ni- CoCr-alloys.
The main solidification parameters, namely the crystal axis, the growth rate, and the cross-sectional area of the columnar crystal control the primary microstructure and thus the final weld seam properties.
Limited understanding of solidification parameters due to complexities in experimental and theoretical weld pool boundary determination and
its mathematical description.
Application of local Lamé curves for efficient weld pool boundary reconstruction Derivation of general analytical solutions for the main solidification parameters of a two-dimensional columnar crystal growth during laser beam welding of thin steel sheets.
The Lamé curves approximation technique was successfully applied for the reconstruction of the rear part of the two-dimensional steady-state weld pool boundary. General analytical expressions for the main solidification parameters, namely the crystal axis, the growth rate and the cross-sectional area of the crystal were derived.
The derived expressions and herewith obtained results were verified and validated by comparing them to known theoretical solutions and experimental measurements. Dimensionless analysis of the influence of the size and shape of the rear weld pool boundary on the solidification parameters was provided.
The derived general solutions and the analysis provided allow for critical welding parameters to be estimated and adapted accordingly to improve the welding process.
Additive manufacturing (AM) technologies are becoming increasingly important, not only for the manufacture of parts, but also as repair technology that complement existing production technologies. Powder bed fusion of metals by laser beam (PBF-LB/M) combines the freedom in design with high achievable accuracy, making it ideal as a repair approach. However, there are still challenges in adapting process for repair applications. When mounting parts inside PBF-LB/M machines, their real position within the build volume is unknown. One goal of a repair process is to minimize the offset between the base component and the additively manufactured structure to reduce additional rework. For a minimum offset between component and additively manufactured structure, the actual position of the component has to be identified with high precision within the machine coordinate system (MCS). In this work a process setup is presented that allows the actual position of a gas turbine blade to be detected inside a PBF-LB/M machine. A high resolution camera with 65 megapixel is used for this purpose. The presented setup is implemented on a SLM 280 HL PBF-LB/M machine. In addition to the setup, a novel repair workflow using PBF-LB/M is presented. The developed setup and workflow consider inaccuracies in the component and camera mounting, as well as process inaccuracies. This includes keystone distortion correction by homography. The machine setup and workflow are used to repair a real gas turbine blade. Subsequently the offset between the turbine blade and the additivley manufactured structure is validated by 3D scanning the repaired part. The maximum offset is 160 µm. The presented approach can be extended to other geometries and PBF-LB/M machine manufacturers. The high-resolution camera approach is platform independent, which facilates the market penetration of PBF-LB/M repair processes.
The degradation effect of hydrogen on the mechanical properties of steels is well known, but still not sufficiently understood. The fast and safe market ramp up of hydrogen technologies makes it evident to evaluate a wider understanding of this topic. In general it is often described as hydrogen embrittlement. Therefore it is desirable to achieve a test method which is able to provide material properties under hydrogen atmosphere in an easy way. Currently mechanical tests under hydrogen atmosphere are executed in autoclaves. For this technique complex hardware is needed, therefore tests are expensive and test capacities are only available in a small scale. The shown test method promises a trendsetting approach for reducing costs and machine time by using hollow specimen.
When it comes to higher accuracies, new technologies and real applications in additive manufacturing, there is one topic which cannot be avoided: The material response on the chosen processing parameters and its agreement and correspondence with literature data of the wrought material grade counterpart. In industrial Additive Manufacturing (AM) standards in terms of printing parameters, protection gas atmospheres or powder handling instructions are not obligatory. Therefore, the question must be answered whether the AM process is reproducible and reliable over different printing companies. This was the motivation to realize a round robin test between 8 European printing companies and academic partners. The consortium had printed and tested fatigue and tensile testing bars under plant-specific conditions. A commonly used cast aluminum alloy, AlSi10Mg, was chosen as test material for the PBF-LB/M process. Differences of the results between the partners and the scatter itself were discussed in detail.
Für die konventionelle Fertigung hat sich das bestehende System der Qualitätsinfrastruktur (QI) bewährt. Die additive Fertigung vergrößert den gestalterischen Spielraum von möglichen Bauteilgeometrien und Prozessfehlern jedoch erheblich. Hier gerät die QI an ihre Grenzen, sodass die Fertigung und Zulassung sicherheits-relevanter Bauteile sehr zeit- und kostenintensive Versuche erfordern. Eine moderne digitale QI erlaubt eine effizientere Qualitätssicherung für additiv gefertigte Bauteile. Dies erfordert eine durchgängig digitale Abbildung des physischen Materialflusses.