Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Erscheinungsjahr
Dokumenttyp
Sprache
- Englisch (59)
- Deutsch (24)
- Russisch (2)
- Italienisch (1)
- Mehrsprachig (1)
Referierte Publikation
- nein (87) (entfernen)
Schlagworte
- Laser beam welding (21)
- Solidification cracking (13)
- Hybrid laser arc welding (7)
- Laserstrahlschweißen (6)
- Additive manufacturing (5)
- Hot cracking test (5)
- Laser metal deposition (5)
- Critical strain (4)
- Elektromagnetische Schmelzbadunterstützung (4)
- Laser Metal Deposition (4)
- Laser welding (4)
- Laserhybridschweißen (4)
- Numerical simulation (4)
- Stainless Steel (4)
- Thick-walled steel (4)
- 316L (3)
- Additive Manufacturing (3)
- Electromagnetic weld pool support (3)
- Hybrid Laser Arc Welding (3)
- Hybrid laser-arc welding (3)
- Laser-Pulver-Auftragschweißen (3)
- Mechanical properties (3)
- Ti-6Al-4V (3)
- Weld pool shape (3)
- Additive Fertigung (2)
- CTW-Test (2)
- Charpy impact toughness (2)
- Cryogenic steel (2)
- Defokussierung (2)
- Edge effects (2)
- Endkrater (2)
- Ferromagnetischer Stahl (2)
- Heißrissresistenz (2)
- High power laser beam welding (2)
- Hot cracking (2)
- Hybrid welding (2)
- Inconel 718 (2)
- Laser beam Welding (2)
- Laser hybrid welding (2)
- Laser-Hybridschweißen (2)
- Local critical strain (2)
- Material transport (2)
- Melt pool dinamics (2)
- Microstructure (2)
- Optical flow (2)
- Partial penetration (2)
- Pipe manufacturing (2)
- Pipeline (2)
- Rundnaht (2)
- Single pass welding (2)
- Temperature behavior (2)
- Thermography (2)
- Weld defects (2)
- Weldability (2)
- laser welding (2)
- Überlappbereich (2)
- 3DDruck (1)
- 9%Ni steel, (1)
- Additiv (1)
- Aluminium (1)
- Analytical model (1)
- As-shielded arc welding (1)
- Aufbaustrategie (1)
- Austenitic stainless steels (1)
- Austenitische Stähle (1)
- Build - up Strategy (1)
- Bulging (1)
- Bulging effect (1)
- CFD-model (1)
- CO2 lasers (1)
- CTW test (1)
- Circumferential weld (1)
- Combined laser manufacturing (1)
- Contact element (1)
- Conventional Ni-based austenitic welding electrode (1)
- Corrosion (1)
- Critical strain rate (1)
- Cryogenic Steel (1)
- DIC technique (1)
- Dickblech (1)
- Different welding position (1)
- Digitale Bildkorrelationstechnik (1)
- Direct Laser Metal Deposition (1)
- Duplex (1)
- Duplex AISI 2205 (1)
- Duplex stainless steel (1)
- Duplex stainless steels (1)
- Duplex steels (1)
- Electromagnetic Weld Pool Support (1)
- Electromagnetic backing (1)
- Electromagnetic weld pool support system (1)
- Elektromagnetische Badstütze (1)
- Elektromagnetische Schmelzbadsicherung (1)
- Elektromagnetische Schmelzbadstütze (1)
- Element transport (1)
- End crater (1)
- Externally loaded test (1)
- FE-model (1)
- FEA (1)
- FEM (1)
- Ferritic welding electrode (1)
- Festigkeit (1)
- Filler material distribution (1)
- Fine-grained Steel (1)
- Flow pattern (1)
- Full Penetration (1)
- Gap bridgeability (1)
- Gas shielded arc welding (1)
- Hardness (1)
- Heißriss (1)
- Heißrissanfälligkeit (1)
- High power laser keyhole welding (1)
- High strength steel (1)
- High-power fibre laser (1)
- Hochfester Stahl (1)
- Hochleistungsschweißen (1)
- Hot crack (1)
- Hybrid-laser-arc welding (1)
- Hydrostatic and arc pressure exceed the Laplace pressure (1)
- In situ strain (1)
- Kaltzähe Stähle (1)
- Keyhole mode laser beam welding (1)
- Laser Beam Welding (1)
- Laser Metal Deposition (LMD) (1)
- Laser Metal Deposition; Laser Beam Welding; Duplex; Stainless Steel (1)
- Laser metal deposition (LMD) (1)
- Laser metal fusion (1)
- Laser-Pulver-Auftragschweißen (LPA) (1)
- Laser-Pulver-Auftragschweißen; Laserstrahlschweißen, Duplex, Pufferschichten (1)
- Laser-beam welding, (1)
- Laser-hybrid welding (1)
- Laserpulverauftragschweißen (1)
- Laserstrahl-(Hybrid)schweißen (1)
- Laserstrahl-MSG-Hybridschweißen (1)
- Liquid Metal Embrittlement (1)
- Lokale Effekte (1)
- Longitudinal weld (1)
- Low Temperature Toughness (1)
- Lötrissigkeit (1)
- MSG-Schweißen (1)
- Macro Processing (Joining, Welding) (1)
- Magnetic bath support (1)
- Magnetohydrodynamics (1)
- Magnettechnik (1)
- Manganese (1)
- Mechanical Properties (1)
- Misalignment of edges (1)
- Modellierung (1)
- Modified spray arc (1)
- Multi - physical modeling (1)
- Nickel (1)
- Nickel-based superalloy (1)
- Novel metrology (1)
- Novel optical measurement (1)
- Novel optical metrology (1)
- Numerical modelling (1)
- Numerical process simulation (1)
- Optical measurement (1)
- Optical measurement technique (1)
- Optical measurment technique (1)
- Optische Emissionsspektroskopie (OES) (1)
- Pendelstrategie (1)
- Penetration depth (1)
- Pipeline steel X120 (1)
- Plasma-cut samples (1)
- Preheating (1)
- ProMoAM (1)
- Process chain (1)
- Pufferschichten (1)
- Rissanfälligkeit (1)
- Rissbildung (1)
- SEP-1220-3 (1)
- SMAW (1)
- Schallemissionsanalyse (SEA) (1)
- Schweißeignung (1)
- Schweißen von kaltzähen Stählen (1)
- Schweißunregelmäßigkeiten (1)
- Self-restraint test (1)
- Shielding gases (1)
- Ship building (1)
- Single-pass welding (1)
- Solidification behaviour (1)
- Solidification craking (1)
- Spiralstrategie (1)
- Stainless steel (1)
- Strain measurement (1)
- Strain rate (1)
- Superelliptic Lamé curves (1)
- Temperaturentwicklung (1)
- Tensile strength (1)
- Thermal cycles (1)
- Thermo-fluid flow (1)
- Thermographie (1)
- Thick Materials (1)
- Thick plate welding (1)
- Thick plates (1)
- Thick-plate welding (1)
- Thick-walled Structures (1)
- Ti - 6Al - 4V (1)
- Turbine blade (1)
- Turbine industry (1)
- Untersuchung laserstrahlgeschweißter Verbindungen (1)
- V-notch impact toughness (1)
- Vakuum (1)
- Weld imperfections (1)
- Weld pool (1)
- Weld pool geometry (1)
- Weld pool shape approximation (1)
- Welding thermal cycle (1)
- Werkstofffragen (1)
- Werkstoffranking (1)
- Widerstandspressschweißen (1)
- Widerstandspunktschweißen (1)
- Windkraftanlagen (1)
- X8Ni9 (1)
- YAG lasers (1)
- cryogenic steel (1)
- hardness (1)
- hochfeste Stähle (1)
- laser hybrid welding (1)
- local effects (1)
- microstructure (1)
- tensile strength (1)
- thermal cycles (1)
- thick plate welding (1)
- vacuum (1)
- Ökonomische und ökologische Vorteile (1)
Organisationseinheit der BAM
- 9 Komponentensicherheit (57)
- 9.3 Schweißtechnische Fertigungsverfahren (55)
- 8 Zerstörungsfreie Prüfung (2)
- 8.0 Abteilungsleitung und andere (2)
- 9.0 Abteilungsleitung und andere (2)
- 1 Analytische Chemie; Referenzmaterialien (1)
- 1.9 Chemische und optische Sensorik (1)
- 8.1 Sensorik, mess- und prüftechnische Verfahren (1)
Eingeladener Vortrag
- nein (11)
The weld quality and the possible defect formation are directly determined by the weld pool shape and the thermo-fluid dynamics therein. In this paper, an untypical weld pool profile, i.e., elongated at its top and bottom but narrowed at the middle, is found experimentally and numerically in the wire feed laser beam welding. The detrimental influence of the weld pool narrowing on the element transport is analyzed and discussed. A magnetohydrodynamic technique is utilized to suppress the narrowing, aiming at a more homogenous element distribution. It is found that a low-temperature region is formed in the middle of the weld pool due to the interaction of the two dominant circulations from the top and bottom regions. The weld pool is significantly narrowed due to the untypical growth of the mushy zone in the low-temperature region, which results in a direct blocking effect on the downward flow and the premature solidification in the middle region. The Lorentz force produced by a transverse oscillating magnetic field shows the potential to change the flow pattern into a single-circulation type and the low-temperature-gradient region is mitigated.
Therefore, the downward transfer channel is widened, and its premature solidification is prevented. The numerical results are well validated by experimental measurements of metal/glass observation and X-ray fluorescence element mapping.
New developments in nickel-based superalloys and production methods, such as the use of additive manufacturing (AM), can result in innovative designs for turbines. It is crucial to understand how the material behaves during the AM process to advance industrial use of these techniques. An analytical model based on reaction-diffusion formalism is developed to better explain the solidification behavior of the material during laser metal deposition (LMD). The well-known Scheil-Gulliver theory has some drawbacks, such as the assumption of equilibrium at the solid-liquid interface, which is addressed by this method. The solidified fractions under the Scheil model and the pure equilibrium model are calculated using CALPHAD simulations. Differential scanning calorimeter is used to measure the heat flow during the solid-liquid phase transformation, the result of which is further converted to solidified fractions. The analytical model is compared with all the other models for validation.
The present work deals with the recently confirmed widening of the weld pool interface, known as a bulging effect, and its relevance in high power laser beam welding. A combined experimental and numerical approach is utilized to study the influence of the bulge on the hot cracking formation and the transport of alloying elements in the molten pool. A technique using a quartz glass, a direct-diode laser illumination, a high-speed camera, and two thermal imaging cameras is applied to visualize the weld pool geometry in the longitudinal section. The study examines the relevance of the bulging effect on both, partial and complete penetration, as well as for different sheet thicknesses ranging from 8 mm to 25 mm. The numerical analysis shows that the formation of a bulge region is highly dependent on the penetration depth and occurs above 10 mm penetration depth. The location of the bulge correlates strongly with the cracking location. The obtained experimental and numerical results reveal that the bulging effect increases the hot cracking susceptibility and limits the transfer of alloying elements from the top of the weld pool to the weld root.
Diese Arbeit zeigt erstmals die Anwendung einer elektromagnetischen Schmelzbadsicherung beim einlagigen MSG-Schweißen von dickwandigen Stählen. Die innovativen Entwicklungen im Bereich des Lichtbogenschweißverfahrens ermöglichen eine Erhöhung der Abschmelzleistung, um die Einschweißtiefe zu steigern. Somit kann die Lagenanzahl reduziert und die Produktivität gesteigert werden. Allerdings besteht insbesondere beim einlagigen Schweißen von dickwandigen Bauteilen in PA-Position ein erhöhtes Risiko für das gravitationsbedingte Austropfen der Schmelze an der Wurzel. Zur Verhinderung werden Badsicherungen eingesetzt, die mechanisch angebracht und nach dem Schweißen entfernt werden müssen, was zeit- und kostenintensiv ist.
Die im Rahmen dieser Studie eingesetzte elektromagnetische Schmelzbadsicherung wirkt dem gravitationsbedingten Austropfen der Schmelze entgegen und kompensiert den hydrostatischen Druck. Sie wirkt kontaktlos, was im Gegensatz zu herkömmlichen Badsicherungen vorteilhaft ist, so dass auf eine zeit- und kostenintensive Nachbearbeitung der Schweißnahtwurzel verzichtet werden kann. Das auf extern angelegten oszillierenden Magnetfeldern beruhende Verfahren wird dabei unterhalb des zu schweißenden Bauteils positioniert. Die Magnetfeldlinien sind quer zur Schweißrichtung ausgerichtet, sodass längs zur Schweißrichtung Wirbelströme im Werkstück und eine stets nach oben gerichtete Lorentzkraft generiert werden. Mit Hilfe der elektromagnetischen Badsicherung konnten beim einlagigen MSG-Schweißen von bis zu 10 mm dicken Blechen die Tropfenbildung vermieden werden. Die innovative Technologie ermöglicht es, dickwandige Bauteile einlagig zu schweißen und reduziert die Nachbearbeitungszeiten und -kosten deutlich.
Laserstrahlhybridschweissen von Türmen für Windkraftanlagen Ökonomische und ökologische Vorteile
(2022)
Das Laserstrahlhybridschweißen ist beim Schweißen von Türmen für Windkraftanlagen eine Alternative zum Unterpulverschweißen von Dickblechen in Mehrlagentechnik und bietet hier ökonomische und ökologische Vorteile. Der industrielle Einsatz des Verfahrens ist jedoch durch prozessspezifische Herausforderungen eingeschränkt. Die im Beitrag beschriebene kontaktlose elektromagnetische Badstütze dient zur Erweiterung des Verfahrenspotenzials im Dickblechbereich >15 mm.
The study deals with the influence of the heat input and the resulting cooling times on the microstructure and Charpy impact toughness of single-pass laser hybrid welded 20-mm thick high-strength steel S690QL. The main focus is on the change of the mechanical properties over the entire seam thickness. The cooling times were measured in-situ using a pyrometer and an optical fibre in three different depths of the seam where Charpy impact test specimens were also later taken. Thereby, three different heat inputs from 1.3 kJ/mm to 2 kJ/mm were investigated. Despite the observed decreased values of both t8/5-cooling time and the Charpy impact toughness in the root part of the seam, the required impact toughness of 38 J/cm2 could be reached in dependance on applied heat input, especially at the heat input of 1.6 kJ/mm.
With additive manufacturing in the powder bed, the component size is limited by the installation space. Joint welding of additively manufactured parts offers a possibility to remove this size limitation. However, due to the specific stress and microstructure state in the additively built material, it is unclear to what extent existing evaluation rules of joint welding are also suitable for welds on additive components. This is investigated using laser beam welding of additively manufactured pipe joints. The welds are evaluated by means of visual inspection, metallographic examinations as well as computed tomography. The types of defects found are comparable to conventional components. This is an indicator that existing evaluation regulations also map the possible defects occurring for weld seams on additive components.
Die technischen Entwicklungen in der Lasertechnologie in den letzten Jahrzehnten haben eine neue Generation von Hochleistungslasersystemen im Leistungsbereich bis zu 100 kW auf den Markt gebracht. Dennoch ist die industrielle Anwendung des Hochleistungslaserstrahlschweißens auf bis zu 15 mm dicke Bleche beschränkt. Mögliche Ursachen der Einschränkungen des Verfahrens sind z.B. die Sensibilität des Verfahrens auf Fertigungstoleranzen wie Spalt und Kantenversatz, die erhöhte Tropfenbildung bei höheren Blechdicken und eine inhomogene Verteilung des Zusatzwerkstoffes beim Laserhybridschweißen. In dieser Studie wird ein auf extern angelegte Magnetfelder basierte elektromagnetische Schmelzbadstütze eingesetzt, um die Grenzen des Verfahrens zu erweitern und die Herausforderungen zu minimieren. Der wesentliche Vorteil der elektromagnetischen Schmelzbadstütze ist, dass sie berührungslos arbeitet. Mit Hilfe der elektromagnetischen Schmelzbadstütze konnten bei 20 mm dicken Proben aus S355J2 die Tropfenbildung an der Wurzel vermieden werden. Zudem wurde der Einfluss der Kantenqualität auf die Schweißnahtqualität untersucht, wobei verschiedene Schneidverfahren zur Kantenvorbereitung eingesetzt wurden, wie z.B. Plasma-, Brenn- oder Laserschneiden. Es konnte gezeigt werden, dass auch bei schlechteren Kantenvorbereitung im Gegensatz zu gefrästen Bauteilen die Werkstoffe einlagig mittels Laserhybridschweißen bei einer hohen Schweißnahtqualität gefügt werden konnten. Bei plasmageschnittenen Proben wurden zudem eine Spaltüberbrückbarkeit bzw. Kantenversatz von bis zu 2 mm sicher überbrückt. Des Weiteren war es mit Hilfe der externen Magnetfelder möglich, die Durchmischung des Zusatzwerkstoffes über die gesamte Schweißnahttiefe deutlich zu homogenisieren.
Solidification cracking is still a serious problem in laser beam welding, especially in the welding of thick-walled plates. The influence of weld pool geometry on solidification cracking in partial penetration welding of thick plates is investigated within scope of this study. Therefore, a specific experimental setup of steel and quartz glass in butt configuration and on the side with high-speed camera were used to record the weld pool shape. In addition, the influence of laser inclination angle on the weld pool geometry and on solidification crack formation was investigated. The results show a bulge in the weld pool root, which is separated from an upper region by a necking region. This leads to a case where there are three different longitudinal region lengths with different solidification zones. This temporal sequence of solidification strongly promotes the formation of solidification cracks in the weld root.
The study deals with the determination of the influence of an externally applied oscillating magnetic field on the melt pool dynamics in high power laser beam and hybrid laser arc welding processes. An AC magnet was positioned under the workpiece which is generating an upward directed electromagnetic force to counteract the formation of the droplets. To visualise the melt flow characteristics, several experiments were carried out using a special technique with mild steel from S355J2 with a wall thickness of up to 20 mm and a quartz glass in butt configuration. The profile of the keyhole and the melt flow were recorded with a high-speed camera from the glass side. Additionally, the influence of the magnetic field orientation to the welding direction on the filler material dilution on laser hybrid welding was studied with variating oscillation frequency. The element distribution over the whole seam thickness was measured with X-ray fluorescence (XRF). The oscillation frequency demonstrated a greater influence on the melt pool dynamics and the mixing of the elements of the filler wire. The high-speed recordings showed, under the influence of the magnetic field, that the melt is affected under strong vortex at the weld root, which also avoids the formation of droplets