Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Dokumenttyp
- Vortrag (152)
- Posterpräsentation (18)
- Beitrag zu einem Tagungsband (16)
- Zeitschriftenartikel (13)
- Buchkapitel (2)
- Monografie (1)
- Dissertation (1)
Sprache
- Englisch (203) (entfernen)
Referierte Publikation
- nein (203) (entfernen)
Schlagworte
- Welding (38)
- Additive Manufacturing (32)
- Additive manufacturing (29)
- Residual stress (26)
- Hydrogen (18)
- Residual Stress (17)
- Residual stresses (15)
- Ultrasonic-assisted milling (13)
- AGIL (12)
- In situ measurement (11)
- Surface integrity (11)
- Diffraction (10)
- TIG welding (10)
- Alloy 36 (9)
- Alloy modification (9)
- Cyclic R-curve (9)
- High-strength steels (9)
- LIBS (9)
- Neutron diffraction (9)
- Fatigue (8)
- High-strength steel (8)
- 316L (7)
- L-PBF (7)
- Microstructure (7)
- X-ray diffraction (7)
- AlSi10Mg (6)
- Duplex stainless steel (6)
- Eigenspannungen (6)
- Residual Stresses (6)
- Restraint (6)
- Stress relief cracking (6)
- AM (5)
- Austenitic stainless steels (5)
- Carrier gas hot extraction (5)
- Chemical composition (5)
- Creep-resistant steel (5)
- Fracture mechanics (5)
- Heat control (5)
- Heat treatment (5)
- Hochfester Stahl (5)
- Hydrogen assisted cracking (5)
- LIBS TIG welding (5)
- Laser Powder Bed Fusion (5)
- Laser powder bed fusion (5)
- Mechanical properties (5)
- Post weld heat treatment (5)
- Steel (5)
- Submerged arc welding (5)
- Additive Fertigung (4)
- Component assessment (4)
- Fatigue crack propagation threshold (4)
- Fracture Mechanics (4)
- High-strength structural steels (4)
- ISO 3690 (4)
- MAG-Schweißen (4)
- Neutron imaging (4)
- Research (4)
- Stainless Steel (4)
- Turbine disk (4)
- X-ray and Neutron Diffraction (4)
- Cold cracking safety (3)
- Crack propagation (3)
- Cyclic R-Curve (3)
- Digital image correlation (3)
- Experimental procedure (3)
- Fatigue crack growth (3)
- Fatigue crack propagation (3)
- Fatigue life (3)
- Fatigue strength (3)
- High strength steel (3)
- High-entropy alloy (3)
- High-strength Steels (3)
- Hydrogen-assisted cracking (3)
- Kitagawa-Takahashi diagram (3)
- Large-scale test (3)
- Neutron Diffraction (3)
- Overspeed (3)
- Repair (3)
- Repair-welding (3)
- Solidification cracking (3)
- Structural integrity (3)
- Synchrotron (3)
- Tool wear (3)
- Ultraschallunterstütztes Fräsen (3)
- WAAM (3)
- Wind energy (3)
- AISI 316L (2)
- Cold cracking (2)
- Component test (2)
- Computed tomography (2)
- Crack closure (2)
- Crack closure effect (2)
- Crack-closure (2)
- Debye-Waller-Faktor (2)
- Dilatometry (2)
- Dissimilar metal weld (2)
- Dissimilar metal weld (DMW) joint (2)
- Duplex Stainless Steel (2)
- Effective crack propagation data (2)
- Endurance limit (2)
- Environmental conditions (2)
- Evaporation (2)
- Fatigue Crack Propagation (2)
- Fatigue properties (2)
- GMA Welding (2)
- High Cycle Fatigue (2)
- High Entropy Alloy (2)
- Hot cracking (2)
- Kaltrisssicherheit (2)
- Martensite (2)
- Measurement (2)
- Microstructure characterization (2)
- Multi-principal element alloys (2)
- Neutron (2)
- Neutron radiography (2)
- Ni alloy (2)
- Oberflächenintegrität (2)
- Phase transformation (2)
- Pipelines (2)
- Plasma-Transferred-Arc (2)
- Plasma-transferred arc welding (2)
- Process parameters (2)
- Reheat cracking (2)
- Repair Welding (2)
- Ressidual stress (2)
- Review (2)
- Selective Laser Melting (2)
- Short crack (2)
- Structural Integrity (2)
- Tensile properties (2)
- Texture (2)
- Thermography (2)
- Ultrasonic assisted milling (2)
- Varestraint-Test (2)
- Vickers hardness (2)
- WRC 1992 diagram (2)
- Weldments (2)
- Werkzeugverschleiß (2)
- Windenergie (2)
- Wire Arc Additive Manufacturing (2)
- Zerspankräfte (2)
- 13CrMoV9-10 (1)
- AISI D2 (1)
- ASTM E647 (1)
- Ageing (1)
- AlSi10Mg alloy (1)
- Aluminium Alloy (1)
- Application properties (1)
- Auftragschweißen (1)
- Austenite-to-martensite transformation (1)
- Austenitic Stainless Steel (1)
- Austenitic stainless steel (1)
- Austenitischer Rostfreier Stahl (1)
- Backlight (1)
- Beugung (1)
- Bragg-edge (1)
- Bragg-edge imaging (1)
- Burst (1)
- Calibration free (1)
- Carrier gas hot extraction (CGHE) (1)
- Co-Cr-alloy (1)
- Cold Spray (1)
- Component Assessment (1)
- Co–Cr-alloy (1)
- Crack propagation resistance (1)
- Crack-tip constraint (1)
- Cracking (1)
- Creep resistant steel (1)
- Crystal Plasticity Modelling (1)
- Cutting tool (1)
- Cyclic J-integral (1)
- Cyclic R-curve analysis (1)
- DED-arc (1)
- Damage Tolerance (1)
- Damage tolerance (1)
- Damage tolerance assessment (1)
- Damage tolerant component design (1)
- Data evaluation methods (1)
- Debye–Waller factor (1)
- Debys-Waller-Factor (1)
- Defects (1)
- Defekte Eigenspannung (1)
- Dehydrogenation heat treatment (1)
- Diffusion (1)
- Digital Image Correlation (DIC) (1)
- EA4T railway axle steel (1)
- EN AW-2618A (1)
- Electrochemical permeation (1)
- Erstarrungsriss (1)
- Experimental design (1)
- Experimental determination (1)
- Failure Assessment Diagram (1)
- Fatigue Crack Growth (1)
- Fatigue Limit (1)
- Fatigue S-N curve (1)
- Fatigue Strength (1)
- Fatigue assessment (1)
- Fatigue crack propagation stagesdefects (1)
- Fatigue limit (1)
- Fatigue threshold (1)
- Ferrite (1)
- Filler metal modification (1)
- Finite Element Analysis (1)
- Fractography (1)
- GMAW (1)
- Gas analytic (1)
- Gas metal arc welding (1)
- Gas tungsten arc welding (GTAW) (1)
- Gefügedegradation (1)
- HAZ (1)
- HCF (1)
- HSLA steel (1)
- Heat Treatment (1)
- Heating rate (1)
- Heißriss (1)
- High-pressure (1)
- High-strength (1)
- High-strength filler metals (1)
- Hot Cracking (1)
- Hot Cracks (1)
- Hydrogen concentration (1)
- Hydrogen diffusion (1)
- Hydrogen embrittlement (1)
- Hydrogen measurement (1)
- IN718 (1)
- ISO 12108 (1)
- Implant test (1)
- Implant-test (1)
- In situ measurement, (1)
- In-service (1)
- In-situ diffraction (1)
- In-situ thermography (1)
- In718 (1)
- Infractstructure (1)
- Intrinsic fatigue crack propagation threshold (1)
- Iron aluminides (1)
- Joining (1)
- Joining process (1)
- LCF (1)
- LPBF (1)
- LTT (1)
- LTT Weld Filler Materials (1)
- LTT filler material (1)
- LTT weld filler materials (1)
- Large scale test (1)
- Laser implantation (1)
- Legierungsmodifikation (1)
- Low Cycle Fatigue (1)
- Low Transformation Temperature (1)
- Low transformation temperature (LTT) steel (1)
- MAG welding (1)
- MAG-Welding (1)
- MANUFACT (1)
- MVT (1)
- Machining (1)
- Manufact (1)
- Material defects (1)
- Mechanical behavior (1)
- Metal vapor (1)
- Metallic components (1)
- Metals (1)
- Micro-shrinkages (1)
- Micromechnical properties (1)
- Microstructure characterisation (1)
- Minimum waiting time (1)
- Mock-up (1)
- Modification of structural morphology (1)
- Modified Varestraint-/Transvarestraint test (1)
- NDT (1)
- Neutron Imaging (1)
- Neutron tomography (1)
- Nickel-iron-alloy (1)
- Niobium carbide (1)
- Non-destructive testing (1)
- Offshore (1)
- Offshore wind turbine (1)
- PBF-LB/M (1)
- Phase field modeling (1)
- Pipeline (1)
- Plasma transferred arc welding (1)
- Pore formation (1)
- Post processing heat treatment (1)
- Powder Bed Fusion of Metals with Laser Beams (1)
- Preciptiates (1)
- Probabilistic Assessment (1)
- Process Monitoring (1)
- Process Simulation (1)
- Pulverbettbasiertes Laserstrahlschmelzen (1)
- Radiography (1)
- Refraction (1)
- Repair welding (1)
- Reparatur (1)
- Reparaturschweißen (1)
- Representative Specimens (1)
- Representative material properties (1)
- Repräsentative Werkstoffeigenschaften (1)
- Research and Development (1)
- Residual lifetime (1)
- Residual stress analysis (1)
- Röntgenradiographie (1)
- S-N diagram (1)
- SLM (1)
- Scattering (1)
- Schadenstolerante Bauteilauslegung (1)
- Selective laser melting (1)
- Short Crack Propagation (1)
- Short crack Propagation (1)
- Slow Strain Rate Testing (1)
- Small scale testing (1)
- Small-scale specimens (1)
- Snergiedispersive Röntgendiffraktion (1)
- Solidification Cracking (1)
- Standardization (1)
- Steel 316L (1)
- Supermartensitic steel (1)
- Supermatensitischer Stahl (1)
- Surface texturing (1)
- TEKKEN test (1)
- Temperature (1)
- Tensile testing (1)
- Thermisches Ausfugen (1)
- Thoughness (1)
- Threshold regime (1)
- TiB2 (1)
- Tomography (1)
- Transient stresses (1)
- Varestraint (1)
- Varestraint testing (1)
- WRC 92 (1)
- Waiting time (1)
- Wasserstoffdegradation (1)
- Welded Joints (1)
- Wärmbehandlung (1)
- Wärmeführung (1)
- X-ray Diffraction (1)
- Zugversuch (1)
- carrier gas hot extraction (1)
- cold cracking safety (1)
- duplex stainless steel (1)
- fatigue crack growth (1)
- high-strength steel (1)
- miniature specimens; FCGR curves; intrinsic threshold (1)
- µCT-analysis (1)
- μCT (1)
- μCT-analysis (1)
Organisationseinheit der BAM
- 9.4 Integrität von Schweißverbindungen (203) (entfernen)
The weldability of stainless steels is largely controlled by the chemical composition, and alloys with ferritic or ferritic-austenitic solidification show the highest resistance to hot cracking. As the resulting phase balance also
affects the final properties, it may be beneficial to both foresee and measure the weld metal ferrite content. The WRC ’92 constitution diagram is currently the most accurate prediction tool available, but it does not take the cooling rate into consideration and the precision may be less accurate for stainless steels with high ferrite numbers (FN). This study aims to validate the reliability of the WRC ’92 diagram for weld metals with FN > 50. The chemical composition was altered through gas tungsten arc welding (GTAW) of UNS S32205 with ER347 filler wire that had been PVD-coated with either niobium (Nb), copper (Cu), nickel (Ni), manganese (Mn), carbon (C), or silicon (Si). The actual ferrite content was assessed using image analysis, FERITSCOPE® and X-ray diffraction (XRD). While the WRC ’92 diagram predictions were deemed accurate to acceptable for Ni, Si, and Mn, notable deviations were observed for Nb, Cu, and C. The FeriteScope exhibited a consistent trend with image analysis, though the values were higher, and scatter was wider, and the conversion factor is open for discussion. The lowest accuracy and largest spread were obtained using non-contact XRD, rendering it unsuitable for ferrite measurements of welds.
The presentation gives an overview of BAM's activities on processing influences and application properties of MPEAs in the form of joined and machined high and medium entropy alloys (CoCrFeMnNi and CoCrNi). In the case of welding, the focus is on defect-free welded joints with sufficient mechanical properties. In the case of machining, the focus is on the possible influence on the surface quality of the materials through adequate milling parameters. In addition, the hydrogen absorption and diffusion properties as well as the electrochemical corrosion behavior are fundamentally examined.
For the hydrogen-based energy economy of tomorrow, the construction of the necessary infrastructure will play a central role. Most materials used to date, such as welded steels, can be prone to hydrogen embrittlement under certain conditions. This includes the classic delayed cold cracking during welding as well as degradation phenomena during service of components in hydrogen-containing environment. For the evaluation of any hydrogen effect, for example, on the mechanical properties of a welded metallic material, the hydrogen content must be precisely determined. In the case of weld seams, the carrier gas hot extraction (CGHE) according to ISO 3690 is meanwhile state-of-the-art. CGHE is based on accelerated hydrogen degassing due to the thermal activation of hydrogen at elevated temperatures. In addition to the quantification of hydrogen, thermal desorption analysis (TDA) with varying heating rates can be used to determine and evaluate the hydrogen trapping at microstructural defects in the material. For both techniques, experimental and metrological influences must be considered, which have a major effect on the result. For example, ISO 3690 suggests different sample geometries and minimum extraction times for CGHE. This study summarizes the results and experiences of numerous investigations at the Federal Institute for Materials Research and Testing (BAM) with different sample temperatures and geometries (ISO 3690 type B and cylindrical TDA samples) regarding the influence of the sample surface (polished/welded), measurement accuracy depending on the sample volume and the insufficient monitoring of the effect of PI control on the extraction temperature. A deviating extraction temperature from the target temperature can significantly falsify the measurement results. Based on the results, methods are shown which allow the desired extraction temperature to be reached quickly without physically interfering with the measuring equipment. This serves to significantly improve the reliability of the hydrogen measurement through increased signal stability and accelerated hydrogen desorption. In general, an independent temperature measurement with dummy samples is recommended for the heating procedure of choice to exclude possible undesired temperature influences before the measurement. The methods described can be transferred directly to industrial applications
The combination of high corrosion resistance and good mechanical properties of duplex steels (DSS) is due to their chemical composition and the balanced phase ratio of ferrite (α) and austenite (γ).
Many industrial applications require a material joint of DSS. Tungsten inert gas (TIG) welding is relatively easy to use, requires little space and allows automated welding, with very high reproducibility and is therefore excellent for welding DSS.
During solidification of these steels, critical phase ratios of α and γ can occur, leading to solidification cracking, susceptibility to corrosion, lower ductility, and critical strength values. Therefore, to obtain the desired material properties, the α/γ distribution must be reliably predicted. This is usually done using the WRC1992 diagram. However, the prediction accuracy of the ferrite content in this diagram is usually not accurate enough and must therefore be optimized. It is therefore necessary to monitor even the smallest changes in the chemical composition of the weld metal, ideally during welding. This is done in these experiments using Laser-induced Breakdown Spectroscopy (LIBS). A major advantage of this technique is the highly accurate time- and spatially-resolved measurement of chemical composition during welding. Previous work has quantified the chemical composition in the weld metal and heat affected zone. In the presented study, the influence of individual elements, such as Nb and Cu, on the resulting weld microstructure is investigated.
Large scale hydrogen assisted cracking test for thick walled SAW joints for offshore applications
(2023)
Offshore wind turbines continuously increase in size and weight and demand adequate offshore foundations concepts like monopiles, tripods or jackets. These components are typically submerged arc welded (SAW) high-strength thick steel plates like the S420ML. During welding, the occurrence of delayed hydrogen assisted cracking (HAC) must be anticipated. HAC is a critical combination of the local hydrogen concentration within a susceptible microstructure under certain mechanical load, i.e., the occurring (welding) residual stresses. The welding sequence of the thick-walled plates complicate the residual stress distribution due to the necessary repeated thermal cycling, i.e., welding seam / layer deposition to fill the joint. For that purpose, SAW with two-wire-technique was used to weld a specially designed and prototype-like mock-up of a real component with a thickness of 50 mm, filled more than 20 passes and a seam length of 1,000 mm. Additional welded stiffeners simulated the effect of a high restraint, to stimulate critical HAC conditions. The necessity of a minimum waiting time (MWT) before the NDT can be conducted (to exclude HAC) was critically verified by the application of ultrasonic testing of the welded joint at different time-steps of the NDT of 48 h after welding. The residual stresses were determined by a robot XRD goniometer. Tensile residual stresses up to the yield limit are found both in the weld metal and in the heat-affected zone. Numerical modelling allowed the qualitative estimation of the hydrogen diffusion in the weld. A remarkable HAC occurrence was not identified and proves both, a certain resistance of the weld joint to HAC and the (questionable) duration of the MWT.
This presentation summarizes the latest results on the microalloying influence on the preciptitation behavior on the mechanical properties of welded high-strength steel with a design yield strength of 690 MPa and above. For that reason, Charpy tests were performed for the pure weld metal and different heat-affected zones. Thermodynamic phase field modeling showed the usefulness of calculations in Thermocalc to predict the preciptiation behavior and (finally) to conclude the mechanistic behavior of the welded joint.
High entropy alloys (HEA) are a new class of materials that have been investigated since the early 2000s and offer great potential to replace conventional alloys. However, since they sometimes have significant contents of expensive alloying elements such as Co or Ni, their use is only conceivable in highly stressed areas of components. For this purpose, the weldability with conventional alloys such as high-alloy austenitic steels must be investigated. In addition to the resulting microstructure, the mechanical properties are also fundamental for the usability of HEAs in DMWs. For this purpose, TIG welds of CoCrFeMnNi HEA (cold rolled and recrystallized state) with AISI 304 austenitic steel are investigated. These mechanical properties are analyzed in this work by means of tensile tests and local hardness measurement. The local strain behavior of the welded joints is also characterized by means of Digital Image Correlation (DIC). The results of the local hardness measurement show a clear influence of the initial condition of the HEA on the HAZ. Thus, the HEA in the cold-rolled condition shows a clear softening because of recrystallization processes in the HAZ. On the other hand, there is no influence on the hardness of the weld metal, which is approx. 200 HV0.1 in both cases. The tensile tests show a consistent failure of the weld in the weld metal. However, regardless of the HEA condition, strengths in the range of the recrystallized HEA (RM ~ 550–600 MPa) are achieved, although with significantly reduced fracture elongations.
Duplex stainless steels (DSS) are frequently used, especially in applications requiring high strength combined with high corrosion resistance in aggressive media. Examples include power plant components and maritime structures. During welding of these steels, local variations in chemical composition can occur. This results in ferritization of the material and negatively affects the mechanical properties of the components. In this work, tungsten inert gas (TIG) welding experiments were performed with DSS. Chemical composition analysis was realized in situ by using Laser Induced Breakdown Spectroscopy (LIBS). The aim of the work is to quantitatively measure the chemical composition in the weld seam of various DSS and to identify possible influences of welding parameters on the microstructure of the material. The chemical concentrations of the main alloying elements Cr, Ni, Mn on the surface of the sample during the welding process and the cooling process were measured. Mn and Ni are austenite stabilizers and their content increases during welding by using certain high alloyed filler material. Spectra were recorded every 1.3 s at a spacing of approximately 2 mm. During the cooling process the location of the measurement was not changed. The LIBS method is proofed to be suitable for the quantitative representation of the chemical compositions during the welding process.
It was found that there is a systematic dependence of the crack growth on the welding parameters as well as on the load. Decreasing welding speeds with simultaneously higher heat input promote crack formation with increasing strain rate.
Based on the results, a new crack criterion was finally selected which allows an extended assessment of the material behavior during the MVT-test. The threshold introduced can quantify the dependencies of the crack formation on the welding and testing parameters, which could not be comprehensively described with the conventional evaluation. In principle, the evaluation routine can also be transferred to other Varestraint or externally loaded hot cracking tests.
This presentation summarizes the latest research results of the influence of the post weld heat treatment (PWHT) rate and
the global mechanical stress conditions on the stress relief cracking (SRC) susceptibility of low-alloyed and creep-resistant CrMoV steel submerged arc weld joints. It was found that a certain effect of very low heating rates could be confirmed. In addition, the interlinking of SRC susceptibility increasing effects during the PWHT and the ex-post indentification in metallographic cross-section via microstructure characterization is very complex.