Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Dokumenttyp
- Vortrag (30)
Referierte Publikation
- nein (30) (entfernen)
Schlagworte
- Additive Manufacturing (5)
- Automation (4)
- Bonding Analysis (3)
- Materials Design (3)
- Microplastics (3)
- Biobased polymers (2)
- Electron microscopy (2)
- ILC (2)
- Interlaboratory comparison (2)
- Machine Learning (2)
- Metrology (2)
- Polymer 3R (2)
- Reference material (2)
- Reference materials (2)
- Standardisation (2)
- TED-GC/MS (2)
- VAMAS (2)
- Workflows (2)
- AFM (1)
- Additive Fertigung (1)
- Advanced ceramics (1)
- Analytical techniques (1)
- Application properties (1)
- BOS (1)
- Bedarfserhebung (1)
- Binder Jetting (1)
- Bioceramic (1)
- Biodegradable polymers (1)
- Biologische Anwendungen (1)
- Ceramic (1)
- Ceramics (1)
- Chemical Bonding (1)
- Chemically Complex Materials (1)
- Degradation (1)
- Ellipsometry (1)
- Gastomographie (1)
- High entropy alloy (1)
- High-entropy alloy (1)
- Hydrogen (1)
- ILC on detection methods (1)
- Imaging ellipsometry (1)
- Korrosion (1)
- LSD-print (1)
- Laser technology (1)
- Laser-induced Periodic Surface Structures (LIPSS) (1)
- Laser-induced periodic surface structures (LIPSS) (1)
- Laser-induzierte Röntgenstrahlung (1)
- Layerwise slurry deposition (1)
- Legierungsmodifikation (1)
- Lignin (1)
- Liquid chromatography (1)
- Machining (1)
- Magnetism (1)
- Mass spectrometry (1)
- Materialbearbeitung (1)
- Method validation (1)
- Microplastic (1)
- Microplastics detection (1)
- Microstructure (1)
- Mikrostrukturen (1)
- Mobile Robotic Olfaction (1)
- Mobile Sensorik (1)
- Nanoelectronics (1)
- Nanoparticles (1)
- Nanostrukturen (1)
- Nichtrostender Stahl (1)
- Oberflächenfunktionalisierung (1)
- Oberflächenintegrität (1)
- PlasticTrace (1)
- Poly(lactides) (1)
- Polyethylene (1)
- Polyethylene Terephtalate (1)
- Polymers (1)
- Power electronics (1)
- Quality control (1)
- Reference products (1)
- Reference standards (1)
- SAXS (1)
- Schleifbearbeitung (1)
- SiFo (1)
- Sicherheitsforschung (1)
- Slurry (1)
- Stahl (1)
- Stakeholder (1)
- Superalloy (1)
- Surface functionalization (1)
- Technical lignin (1)
- Technische Materialien (1)
- Thermal Properties (1)
- Time-resolved analysis (1)
- Transparent ceramics (1)
- Tunable Diode Laser Absorption Spectroscopy (1)
- Two Photon Polymerization (1)
- Two-dimensional chromatography (2D-LC) (1)
- Ultrafast laser processing (1)
- Ultrakurzpuls-Laserbearbeitung (1)
- Ultrakurzpulslaser (1)
- Ultraschallunterstütztes Fräsen (1)
- Verformung (1)
- Welding (1)
- White light interference microscopy (1)
Organisationseinheit der BAM
- 6 Materialchemie (20)
- 6.1 Oberflächen- und Dünnschichtanalyse (7)
- 5 Werkstofftechnik (6)
- 5.4 Multimateriale Fertigungsprozesse (5)
- 6.0 Abteilungsleitung und andere (4)
- 6.2 Material- und Oberflächentechnologien (4)
- 6.3 Strukturanalytik (4)
- 6.6 Physik und chemische Analytik der Polymere (4)
- 9 Komponentensicherheit (2)
- 9.2 Versuchsanlagen und Prüftechnik (2)
Eingeladener Vortrag
- ja (30) (entfernen)
Motivated by the aim of developing an additive manufacturing (AM) technology easily integrated in the process chains of the ceramic industry, the LSD-print technology was conceived as a slurry-based variation of binder jetting (BJ).
BJ and other powder bed technologies (such as powder bed fusion) are amongst the most successful AM techniques, especially for metals and polymers, thanks to their high productivity and scalability. The possibility to use commercially available feedstocks (in the form of powders or granules) makes BJ also attractive for ceramic materials. The application of these techniques to most advanced ceramics has however been difficult so far, because of the limitations in depositing homogeneous layers with fine, typically poorly flowable powders.
In this context, the "layerwise slurry deposition" (LSD) was proposed at TU Clausthal (Germany) as a slurry-based deposition of ceramic layers by means of a doctor blade. Combined with layer-by-layer laser sintering of the material, the LSD process was originally demonstrated for the rapid prototyping of silicate ceramics. Due to the difficulties in controlling the microstructure and the defect formation in laser-sintered technical ceramics, the LSD process was later combined with inkjet printing in the LSD-print technology, which has been further developed at BAM (Germany) in the past decade.
The LSD-print technology combines the high speed of inkjet printing, typical of BJ, with the possibility of producing a variety of high-quality ceramics with properties comparable to those achieved by traditional processing. Due to the mechanical stability of the powder bed, the process can also be carried out with continuous layer deposition on a rotating platform, which further increases its productivity.
This presentation will delve into 10 years of research on the LSD-print of a wide variety of technical ceramics including alumina, silicon carbides and dental ceramics. The discussion highlights how a seemingly small process and feedstock modification (from powders to slurries) has great influence on the challenges and potential of this process, which are being addressed on its path to industrialization.
The presentation will start with an overview of ceramic additive manufacturing (AM) technologies and will discuss the potential of AM in the field of bioceramics.
The presentation will then focus on two possible use cases of binder jetting technologies.
In the first example, standard powder-based binder jetting is used to manufacture a porous implant design for large scale bone defects. The related challenges in the process chain will be discussed, from powder synthesis to sintering and characterization of the printed part.
In the second example, the LSD-print slurry-based binder jetting technology is presented as a possibility to adapt powder-bed AM to produce dense ceramic parts. The use case will focus on an application in the field of dental ceramics, specifically for the manufacturing of patient individualized single tooth restorations (veneers, crowns) with a high throughput process chain.
Microplastic reference material is required for validation and harmonization purposes. This includes the analysis of the pure polymer particles and the validation of the respective measurement methods. In addition, there is the harmonization of different laboratories. On the other hand, sample preparation methods must be validated and harmonized with regard to their recovery and subsequent analysis in the respective matrices. For this purpose, we produce reference material candidates in the form of tablets with different mass fractions and particle numbers of polyethelene terephthalate. In the presentation first measurement results by µ-Raman, µ-FTIR, pyrolysis-GC-MS and TED-GC/MS will be presented.
The presentation gives an overview of BAM's activities on processing influences and application properties of MPEAs in the form of joined and machined high and medium entropy alloys (CoCrFeMnNi and CoCrNi). In the case of welding, the focus is on defect-free welded joints with sufficient mechanical properties. In the case of machining, the focus is on the possible influence on the surface quality of the materials through adequate milling parameters. In addition, the hydrogen absorption and diffusion properties as well as the electrochemical corrosion behavior are fundamentally examined.
Ziel des FuE-Vorhabens ist die Entwicklung, Aufbau und Validierung eines gasto-mographischen Messsystems basierend auf stationärer und mobiler Sensorik zum Emissionsmonitoring in kommunalen Kläranlagen. Die Gastomographie basiert hierbei im Wesentlichen auf, aus unterschiedlichen Sichtwinkeln aufgenommenen, integralen Konzentrationsmessungen, anhand derer eine Rekonstruktion der Gasverteilung erfolgt. Das FuE-Projekt kombiniert hierfür stationäre Sensornetzwerke mit luftgestützten und bodengebundenen Robotersystemen in einem System. Letztere werden mit Reflektoren und/oder Gasdetektoren ausgestattet. Hierfür werden Open-Path-Gasmesstechnik basierend auf Tunable Diode Laser Ab-sorption Spectroscopy (TDLAS, primär CH4 in ppm·m) und In-situ-Gassensorik (CH4, ppm) auf Basis von z.B. Infrarot eingesetzt. Dies sind zwei komplementäre Methoden der Gasmessung: Die In-situ-Gassensorik ermöglicht Punktmessungen, wohingegen TDLAS-Sensoren Gaskonzentrationen integral über offene Messstre-cken von bis zu 60 m gegen Oberflächen messen. Die In-situ-Gassensorik wird für Referenzmessungen und ggf. zur Erhöhung der Rekonstruktionsqualität zum Ein-satz kommen. Die wesentlichen Neuheiten des Projekts sind:
• 2D-Gastomographie auf Basis eines mit TDLAS-basierter Open-Path-Gasmesstechnik und Reflektoren ausgestatteten heterogenen Messsystems.
• CT-basierte Rekonstruktionsalgorithmen, adaptiert an die komplexen Rahmenbedingungen.
• Validierung des Messsystems anhand realer Messungen auf Kläranlagen.
Der Vortrag gibt eine Übersicht zum Stand des Projekts zum Thema Gefügeveränderung bei trockener Grobbearbeitung. Es wurden vier verschiedene trockene Oberflächenbearbeitungsverfahren an 2 Werkstoffen eingesetzt um Testoberflächen zu schaffen. Die so gefertigten Oberflächen wurden lichtmikroskopisch untersucht und die jeweiligen Rauhigkeitskennwerte bestimmt. Weiterhin wurden metallografische Querschliffe angefertigt um die verfahrens- bzw. materialabhängigen Einflüsse auf mögliche Gefügeveränderungen zu untersuchen. Zusätzlich wurden elektrochemische Polarisationsversuche durchgeführt um die oberflächenspezifische Korrosionsbeständigkeit der nichtrostenden Stahlproben zu quantifizieren.
Der Vortrag gibt einen Überblick zu ultrakurzen Laserpulsen, der Ultrakurzpulslaser-Materialbearbeitung und der dabei ggf. auftretenden unerwünschten Röntgenstrahlung. Es wird die Laserbearbeitung von technischen und biologischen Materialien diskutiert. Schutzmöglichkeiten gegenüber der Röntgenstrahlung werden erörtert.
Im Rahmen des Vortrags wurden die Ergebnisse und die Methodik zur Erhebung von Forschungsbedarfen und Fähigkeitslücken bei den Behörden und Organisationen mit Sicherheitsaufgaben, welche im Rahmen des Projektes InnoBOSK durchgeführt wurden, vorgestellt. Den Schwerpunkt bildete dabei die Umsetzung der Workshops gemeinsam mit den Einsatzkräften und die Umsetzung der problemorientierten Erhebungsmethodik.
This contributions shows the first results of the ongoing interlaboratory comparisons under VAMAS/TWA 34 Nanoparticle populations related on the determination of pasrticle size distribution and relative concentration of nanoparticles and an example of an ILC running under VAMAS/TWA 41 Graphene and Related 2D Materials on the determination of the lateral diemsnions of graphene oxide flakes by Scanning Electron Microscopy. The link to related standardisation projects at ISO/TC Nanotechnologies are explained.
Advanced materials, such as nanomaterials, 2D materials, or thin films, play a crucial role in driving economic development and addressing major challenges in the coming years. These challenges include mitigating the impact of climate change, advancing lightweight engineering, enhancing catalysis, and improving medical applications.
To comprehend the performance of these materials and ensure their acceptance across various sectors as safe and sustainable for both humans and the environment, the availability of reference procedures, materials, and data is essential. One versatile tool for establishing such references and evaluating the proficiency of individual laboratories and their competencies is through (international) interlaboratory comparisons (ILC). Notably, initiatives like the Versailles Project on Advanced Materials and Standards (VAMAS) provide a platform for conducting ILCs.
This webinar will showcase various examples of interlaboratory comparisons, illustrating their impact on the development of reference products.