Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Erscheinungsjahr
- 2006 (26) (entfernen)
Dokumenttyp
Schlagworte
- Electron backscatter diffraction (5)
- Steel (3)
- Embrittlement (2)
- Hydrogen (2)
- AFM (1)
- Brennstoffe (1)
- Closed test sequence (1)
- Component tests (1)
- Copper Microstructures (1)
- Crystal orientation (1)
- Epoxy Interphase (1)
- Explosivstoffe (1)
- FIB (1)
- Fügeverfahren (1)
- Growth competition (1)
- Heißrisssicherheit (1)
- Holz (1)
- Hydrogen diffusion (1)
- Hydrogen pickup (1)
- Integritätsprüfung (1)
- Iron meteorites (1)
- Kaltrisssicherheit (1)
- Kraftstoffe (1)
- Kurdjumov-Sachs (1)
- MVT-Test (1)
- Modul (1)
- Nanoscale Characterization (1)
- Nickel alloy (1)
- Nishiyama-Wassermann (1)
- Numerical simulation (1)
- Orientation relationships (1)
- Permeation experiments (1)
- Resonanzmessung (1)
- SEM (1)
- Single crystal (1)
- Stahltragwerke (1)
- Supermartensitics (1)
- TEKKEN-Test (1)
- Ultraschallechoverfahren (1)
- detection of elongated objects in low SNR condition (1)
- dynamic programming (1)
- object detection (1)
A new algorithm for detection of longitudinal crack-like indications in radiographic images is developed in this work. Conventional local detection techniques give unsatisfactory results for this task due to the low signal to noise ratio (SNR ~ 1) of crack-like indications in radiographic images. The usage of global features of crack-like indications provides the necessary noise resistance, but this is connected with prohibitive computational complexities of detection and difficulties in a formal description of the indication shape. Conventionally, the excessive computational complexity of the solution is reduced by usage of heuristics. The heuristics to be used, are selected on a trial and error basis, are problem dependent and do not guarantee the optimal solution. Not following this way is a distinctive feature of the algorithm developed here. Instead, a global characteristic of crack-like indication (the estimation function) is used, whose maximum in the space of all possible positions, lengths and shapes can be found exactly, i.e. without any heuristics. The proposed estimation function is defined as a sum of a posteriori information gains about hypothesis of indication presence in each point along the whole hypothetical indication. The gain in the information about hypothesis of indication presence results from the analysis of the underlying image in the local area. Such an estimation function is theoretically justified and exhibits a desirable behaviour on changing signals. The developed algorithm is implemented in the C++ programming language and testet on synthetic as well as on real images. It delivers good results (high correct detection rate by given false alarm rate) which are comparable to the performance of trained human inspectors.
Im Rahmen eines DFG-Forschungsvorhabens (FOR 537) wird ein Teilprojekt an der BAM bearbeitet. Ziel dieser Arbeit ist die quantitative Beschreibung und Bewertung des Korrosionsfortschrittes an Stahlproben mit kleinen Kathodenflächen (Eigenkorrosion) mittels elektrochemischer Messungen. Für die Untersuchungen wurden Betonproben mit eingebetteten Stahlelektroden hergestellt. Dabei wurden gezielt betontechnologische Parameter variiert. Dabei ist der Beton als Elektrolyt zu betrachten. Nach bestimmten Zeitintervallen werden die Betonproben aufgebrochen und die eingebetteten Stahlelektroden durch visuelle Inspektion und anschließende Bestimmung des Masseverlustes bewertet. Zur Charakterisierung des Betons (Elektrolyt) dient das Verfahren der Quecksilberporosimetrie. Mit dem Verfahren lassen sich die Zusammenhänge zwischen den betontechnologischen Parametern und der Porenstruktur aufzeigen und mittels der umfangreichen Variation der Betonparameter die Auswirkung auf den Korrosionsfortschritt nachweisen.
ür die Berücksichtigung mechanischer Belastungen unterhalb der Streckgrenze ist im Rahmen einer zuverlässigen Bauteilauslegung die Kenntnis der elastischen Konstanten von besonderer Bedeutung. Für die experimentelle Bestimmung des Elastizitätsmoduls wurde eine Vielzahl von Verfahren entwickelt, die zum Teil werkstoffspezifisch Eingang in die Normung gefunden haben.
Prinzipiell können diese Verfahren in zwei Gruppen unterteilt werden: die statischen und die dynamischen Prüfverfahren. Die statischen Verfahren beruhen auf der direkten Messung des Spannungs-Dehnungs-Zusammenhangs während einer mechanischen Belastung im elastischen Verformungsbereich (Zug, Biegung, Druck). Die dynamischen Verfahren basieren auf der Schwingungsanregung eines Prüfkörpers und der Analyse der resultierenden Schwingungen (Resonanzmethode oder Impulsanregungsmethode) oder auf der Messung der Ultraschallausbreitungsgeschwindigkeit.
Stellvertretend für die dynamischen Verfahren wird im ersten Teil dieses Beitrages die Resonanzmethode vorgestellt. Der zweite Teil dieses Beitrages fasst die werkstoffabhängigen Ergebnisse der E-Modulbestimmung mit statischen Verfahren im Zug- und Biegeversuch zusammen.
The epoxy/metal interface regions are recognized as crucial for the mechanical reliability of composite materials. In particular, the spatial stress distribution is governed by modulus variations, which may result from the physical-chemical interactions between epoxy and the metal surface. The properties of the interphase between bulk polymer and metal were analyzed in nanometer scale. It was aimed to characterize the stiffness gradient of the polymeric interphase, which was formed by a thermoset being cured in contact with a metal surface.
The competitive growth of columnar grains in a single-grain selector, which is used for directional solidification of single-crystal blades from nickel-based superalloys, has been investigated by electron backscattered diffraction and local X-ray diffraction analysis. It has been found that the competitive grain growth in a starter block is determined by the crystallographic factor: rapidly growing grains with the axial orientation close to the [001] direction dominate in this part of the casting. For the competitive grain growth in a helicoidal separator, the geometric factor (the position of a grain at the input of the separator) is also important. The results obtained suggest that an appropriate geometry of the single-grain selector was chosen. In addition, the distribution of the orientations of columnar grains obtained by electron backscattered diffraction, can be used for approximate estimation of the yield of suitable (i.e., with the deviation of the axial orientation from the [001] direction within a specified tolerance) single-crystal blades.
Fatigue crack propagation investigations have been performed in austenitic-ferritic duplex stainless steel H22N5M3 in air and during hydrogen charging, using various frequencies of loading. Strong differences of crack propagation velocity depending on the test conditions were noticed. Lower frequency with applied hydrogen charging led to the huge increase of crack propagation velocity compared to the tests performed in air. To understand such a behaviour in each case and characterize crack mode, the samples were observed using electron back-scattered diffraction (EBSD). It was shown that in air, the fatigue crack propagation involved plastic deformation and the resulting cracks had ductile character. The presence of hydrogen led to more brittle mode of cracking. This effect was also connected with frequency of loading: lower frequency, which assured longer time for hydrogen-crack tip interaction, resulted in the highest crack propagation velocity and the brittle cracking mode with lower amount of plastic deformation. The performed observations indicated that the path of the crack went mostly transgranularly through both austenite and ferrite phases. Phase and grain boundaries were not the preferred paths for crack propagation.
The hydrogen influence on the microstructure of the austenitic-ferritic Cr22-Ni5-Mo3 stainless steel was investigated. Cathodic hydrogen charging was performed electrochemically from aqueous solution of 0.1M H2SO4 with hydrogen entry promoter addition. The aim of this study was to reveal microstructural changes appearing during the hydrogen charging and particularly to clarify the occurrence of phase transformations induced by hydrogen. The specific changes in both phases of steel were observed. In the ferritic phase, strong increase of dislocation density was noticed. Longer time of hydrogen charging leaded also to the strips and twin plates formation in ferrite phase. In the austenitic phase, the generation of stacking faults, followed by the formation of α' martensite was remarked.
Schadstellen im Inneren von Holzbauteilen (z. B. Innenfäule) oder baulich unzugängliche Oberflächenfäule stellen ein besonderes Problem dar, da diese von außen schlecht erkannt werden können und bei einer ausgeprägten Schädigung zu einem plötzlichen Versagen des Bauteils führen können. Ziel der vorliegenden Arbeit war es, eine Messapparatur zu entwickeln und damit zu untersuchen, ob und unter welchen Bedingungen Ultraschallechoverfahren an Holzbauteilen möglich sind. Weiter sollte untersucht werden, welche Schäden und Minderdicken mit Ultraschallecho von nur einer zugänglichen Seite aus geortet werden können.
The increasing application of supermartensitic steels for welded pipelines is an economical alternative to the hitherto used higher-alloyed materials in the North Sea oil and gas indus-try. Failure in such constructions must at any rate be excluded for economical and ecologi-cal reasons. The application of these steels for the transport of corrosive mixtures may, however, involve hydrogen pickup with subsequent hydrogen-assisted stress corrosion cracking. It is therefore necessary not only to assure the weldability, but particularly to have best possible knowledge of the service behaviour and of the failure risk. In order to ensure the transferability of test results to real joined components, innovative test methods are in-creasingly required to be incorporated into a closed test sequence. It will be demonstrated how it is possible to gain significant advantages from the direct comparison between ex-perimentally determined results from component weld tests on the one hand and material-specific data from small-scale tests on the other hand and numerical simulations. These data that have now been made available are of major importance for industrial applications and are considered to provide a sound basis for realistic lifetime assessments.