Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Erscheinungsjahr
- 2018 (76) (entfernen)
Dokumenttyp
- Zeitschriftenartikel (31)
- Vortrag (29)
- Beitrag zu einem Tagungsband (11)
- Posterpräsentation (5)
Schlagworte
- Additive manufacturing (9)
- Laser metal deposition (9)
- Laser beam welding (8)
- Solidification cracking (7)
- Additive Fertigung (6)
- Laser welding (5)
- Digitalisierung (4)
- Microstructure (4)
- ProMoAM (4)
- Additive Manufacturing (3)
- High power laser beam welding (3)
- Laserstrahlschweißen (3)
- Numerical modelling (3)
- Numerical simulation (3)
- Thick-walled steel (3)
- Adaptives Schweißen (2)
- Bulging (2)
- CFD-model (2)
- Condition monitoring (2)
- Critical strain (2)
- DED (2)
- Dimensional accuracy (2)
- Dissimilar metal weld overlays (2)
- Electromagnetic weld pool support (2)
- Embedded electronics (2)
- FE-model (2)
- Ferromagnetischer Stahl (2)
- Grain size (2)
- Hybrid laser arc welding (2)
- Hybrid laser-arc welding (2)
- In situ strain (2)
- Laser-metal-deposition (2)
- Laserimplantation (2)
- Lichtbogensensorik (2)
- MSG-Engspaltschweißen (2)
- Multiple reflections (2)
- Numerical process simulation (2)
- Offshore wind (2)
- Optical measurement (2)
- Process chain (2)
- Process simulation (2)
- Prozessmonitoring (2)
- Pulsed laser beam welding (2)
- Residual stress (2)
- Selektive-laser-melting (2)
- Single pass welding (2)
- Strain rate (2)
- Thermography (2)
- Transient heat transfer (2)
- Vaporization (2)
- Weld pool dynamics (2)
- Weld pool geometry (2)
- Weld pool shape (2)
- Welding simulation (2)
- 316L (1)
- 9%Ni steel (1)
- 9%Ni steel, (1)
- AM (1)
- Adaptive MSG-Lichtbogenprozesse (1)
- Adaptive MSG-Lichtbogenschweißprozesse (1)
- Adaptive control (1)
- Adaptive welding beam oscillation (1)
- Adative arc welding processes (1)
- Aluminium-Druckgusslegierung (1)
- Anlagen (1)
- Arc sensor (1)
- Automated manufacturing (1)
- Automation (1)
- Automatisierte Fertigung (1)
- Automotive application (1)
- Beam oscillation (1)
- Beam oscillations (1)
- Boundary element method (1)
- Build-up strategy (1)
- Bulging effect (1)
- CFD model (1)
- Cimensional Accuracy (1)
- Clad steels (1)
- Coarse grained heat affected zone (1)
- Coarse-grained heat-affected zone (1)
- Computational fluid dynamics (1)
- Control (1)
- Conventional Ni-based austenitic welding electrode (1)
- Cracking mechanism (1)
- Cryogenic steel (1)
- Current density (1)
- DIC (1)
- Datenmanagement (1)
- Defekte (1)
- Deformed geometry (1)
- Density measurement (1)
- Deposition rate (1)
- Design of experiments (1)
- Die-cast aluminum (1)
- Digital Image Correlation (1)
- Digital image correlation (1)
- Digitalisation (1)
- Digitization (1)
- Directed Energy Deposition (1)
- Edge effects (1)
- Electromagnetic influence (1)
- Electromagnetic support (1)
- Electromagnetic weld pool support system (1)
- Elektromagnetische Schmelzbadbeeinflussung (1)
- Elektromagnetische Schmelzbadunterstützung (1)
- Equivalent heat source (1)
- Equivalent stress concentration factors (1)
- Equivalent volumetric heat source (1)
- Ermüdungsfestigkeit (1)
- Ferritic welding electrode (1)
- Ferromagnetic steels (1)
- Fiber laser (1)
- Finite element method (FEM) (1)
- Formgedächtnislegierungen (1)
- Fresnel reflection (1)
- Full penetration (1)
- Fusion Zone (1)
- Fusion zone size (1)
- Fusion zone, nickel alloys (1)
- Füllgradregelung (1)
- GMA welding (1)
- GMR sensors (1)
- GTAW (1)
- Gap bridgeability (1)
- Gap bridging (1)
- Gleeble testing (1)
- Grade S960QL steel (1)
- HSLA (1)
- Heat flow (1)
- Heissrisse (1)
- High brightness (1)
- High power (1)
- High-power fibre laser (1)
- High-power laser beam (1)
- High-strength steel sheets (1)
- Hohlprofilknoten (1)
- Hot cracking test (1)
- Hybrid-laser-arc welding (1)
- Hydrostatic and arc pressure exceed the Laplace pressure (1)
- Impact absorbed energy (1)
- Karosseriebau (1)
- Kerbspannungskonzept (1)
- Keyhole welding (1)
- Künstliche Intelligenz (1)
- LME (1)
- Laser Metal Deposition (1)
- Laser beam melting (1)
- Laser keyhole welding (1)
- Laser surfacing (1)
- Laser- und Lichtbogenenergie (1)
- Laser-Pulver-Auftragschweißen (1)
- Laser-beam welding, (1)
- Laser-hybrid welding (1)
- Laser-metal-depositon (1)
- Laser-plasma hybrid (1)
- Laserpulverauftragschweißen (1)
- Laserstrahl-Hybridschweißen (1)
- Laserstrahlschmelzen (1)
- Life Cycle Assessment (1)
- Life Cycle Assessment (LCA) Fusion welding (1)
- Life Cycle Assessment (LCA) Impact categories (1)
- Life Cycle Assessment (LCA) Schweißprozesse (1)
- Life Cycle Assessment (LCA) Umweltwirkungen (1)
- Liquid metal embrittlement (1)
- Local critical strain (1)
- Low carbon steel (1)
- Low heat input GMA welding (1)
- Low heat input Gma welding (1)
- MAG Prozesssteuerung (1)
- Magnetic stray field (1)
- Magnettechnik (1)
- Material modeling (1)
- Materialmodellierung (1)
- Mechanical properties (1)
- Melt pool dynamics (1)
- Microstructure Tensile strength (1)
- Misalignment of edges (1)
- Moving mesh (1)
- Narrow gap welding (1)
- Narrow-gap welding (1)
- Neural networks (1)
- Neutron diffraction (1)
- NiTi-Legierungen (1)
- Nickel alloys (1)
- Normen (1)
- Notch stress approach (1)
- Novel metrology (1)
- Novel optical metrology (1)
- Numerical welding simulation (1)
- Oberflächenmessung (1)
- Oberflächenstrukturierung (1)
- Oszillierendes Magnetfeld (1)
- Partial penetration (1)
- Pipeline (1)
- Plasma-transferred-arc (1)
- Plume heating (1)
- Porenreduktion (1)
- Porosity (1)
- Porosity reduction (1)
- Profilvermessung (1)
- Prozesskette (1)
- Prozessregelung (1)
- Resistance spot welding (1)
- SLM printed plasma torch (1)
- SMAW (1)
- Schmelzbadstütze (1)
- Schweißdatenmanagement (1)
- Schweißnahtgeometrie (1)
- Secondary heat source (1)
- Sensor (1)
- Sensorik (1)
- Stainless Steel (1)
- Stainless steel (1)
- Statistische Versuchsplanung (1)
- Strain-rate (1)
- Stress-strain behavior (1)
- Surface cracks (1)
- TIG-welding (1)
- Temperature behavior (1)
- Temperature distribution (1)
- Tensile strength (1)
- Thermal cycles (1)
- Thermografie (1)
- Thick plates (1)
- Ti-6Al-4V (1)
- Titandiborid (1)
- Titanium alloy (1)
- Transformable steels (1)
- Tubular joints (1)
- Turbine components (1)
- Umweltwirkungen (1)
- Vapor recondensation (1)
- Vernetzte Produktion (1)
- Viscoplasticity (1)
- Weld pool (1)
- Weld seam geometry (1)
- Welding Simulation (1)
- X153CrMoV12 (1)
- Zinc (1)
- Äquivalente Spannungskonzentrationsfaktoren (1)
- Ökobilanzierung (1)
Organisationseinheit der BAM
- 9.3 Schweißtechnische Fertigungsverfahren (76) (entfernen)
Eingeladener Vortrag
- nein (29)
Due to rapid, localized heating and cooling, distortions accumulate in additive manufactured laser metal deposition (LMD) components, leading to a loss of dimensional accuracy or even cracking. Numerical welding simulations allow the prediction of these deviations and their optimization before conducting experiments. To assess the viability of the simulation tool for the use in a predictive manner, comprehensive systems as well as to choose the optimal product matches, product analysis methods are needed. Indeed, most of the known methods aim to analyze a product or one product family on the physical level. Different product families, however, may differ largely in terms of the number and nature of components. This fact impedes an efficient comparison and choice of appropriate product family combinations for the production system. A new methodology is proposed to analyze existing products in view of their functional and physical architecture. The aim is to Cluster these products in new assembly oriented product families for the optimization.
The paper deals with the integration of a light emitting diode (LED) into an additive manufactured metal component. Selective laser melting (SLM) and laser metal deposition (LMD) are used. The material used is the chrome-nickel steel 316L. The basic component is manufactured by means of SLM and consists of a solid body and an area with grid structure. The solid body includes a duct in the shape of a groove with a recess for the positioning of the power cable. The LED is embedded in the grid structure via an inlet from the solid body. In further processing, the groove is filled with LMD. Two strategies with different parameter combinations were investigated. It shows that a high energy input near the power cable leads to its destruction. By using multiple parameter combinations during the manufacturing process, this destruction can be prevented. There was a comparison of both strategies with regard to the necessary number of tracks and duration of welding time.
The paper deals with the integration of a light emitting diode (LED) into an additive manufactured metal component. Selective laser melting (SLM) and laser metal deposition (LMD) are used. The material used is the chrome-nickel steel 316L. The basic component is manufactured by means of SLM and consists of a solid body and an area with grid structure. The solid body includes a duct in the shape of a groove with a recess for the positioning of the power cable. The LED is embedded in the grid structure via an inlet from the solid body. In further processing, the groove is filled with LMD. Two strategies with different parameter combinations were investigated. It shows that a high energy input near the power cable leads to its destruction. By using multiple parameter combinations during the manufacturing process, this destruction can be prevented. There was a comparison of both strategies with regard to the necessary number of tracks and duration of welding time.
In einer Vielzahl technischer Anwendungen spielt die Aufrechterhaltung eines definierten Reibungs- und Verschleißverhaltens zwischen bewegten Oberflächen für die Sicherheit und Funktionalität eine entscheidende Rolle. Die Oberflächentechnik versucht durch geeignete Verfahren die Randschichten zu ertüchtigen, um Reibung und Verschleiß zu kontrollieren. Eine Verbesserung der Materialeigenschaften kann durch flächige Beschichtungen erreicht werden. Zusätzlich ermöglichen Oberflächenstrukturierungen breite Möglichkeiten zur Beeinflussung des Schmierungszustandes bzw. der Kontaktbedingungen. Neben Negativstrukturen bieten ebenfalls erhabene Mikrostrukturen großes Potenzial zur Beeinflussung des tribologischen Verhaltens. Ihr Einsatz ist aber aufgrund der besonderen Verschleißproblematik erhabener Strukturen momentan limitiert, so dass in der Regel zusätzliche verschleißreduzierende Beschichtungen notwendig werden.
In diesem Beitrag wurde das Verfahren der Laserimplantation angewandt, mit dem erhabene und separierte Oberflächenstrukturen hoher Verschleißfestigkeit in einem Fertigungsschritt erzeugbar sind. Das Verfahren basiert auf einem lokalisierten Dispergieren von Hartstoffpartikeln. Hierfür wurde erstmalig ein gepulster Faserlaser mit hoher Strahlqualität zur Erzeugung punkt- und linienförmiger Mikrostrukturen angewandt. Versuche wurden auf dem Kaltarbeitsstahl X153CrMoV12 unter Anwendung von Titandiborid als Hartstoff durchgeführt. Anhand von Härtemessungen konnte gezeigt werden, dass sowohl punkt- als auch linienförmige Strukturen mit Härten über 1000 HV1 und einer feinkörnigen Mikrostruktur mit feinverteilten Hartstoffpartikeln herstellbar sind. Des Weiteren war es möglich, die Implantgeometrien, welche an Querschliffen und durch Weißlichtinterferometeraufnahmen erfasst wurden, durch die Pulsleistung und Pulsdauer zu steuern.
Dissimilar metal weld overlays of nickel-base alloys on low-alloy steel components are commonly used in the oil and gas, petrochemical, and power generation industries to provide corrosion and oxidation resistance in a wide range of service Environments and temperatures. Traditionally, dissimilar weld overlays are produced using cold or hot wire gas tungsten arc welding.
This study aims to identify and evaluate potential advantages of low heat input gas metal arc welding processes over the conventional gas tungsten arc welding in the production of such overlays. Parts I and II of this publication series described characteristics of the heat-affected zone and the transition zone region of alloy 625 on grade 22 steel overlays. These results indicate a good resistance against hydrogen-assisted cracking, which is being verified within this third part of the publication series. To determine the hydrogen-assisted cracking susceptibility, welded samples are tested using the delayed hydrogen-assisted cracking test. Fractography is performed using scanning electron microscopy along with energy dispersive spectroscopy. The results confirm the suitability and efficiency of low heat input gas metal arc welding for dissimilar weld overlays. Variation of the postweld heat treatment procedure bears potential for improvement in this respect.
With the recent rise in the demand for additive manufacturing (AM), the need for reliable simulation tools to support experimental efforts grows steadily. Computational welding mechanics approaches can simulate the AM processes but are generally not validated for AM-specific effects originating from multiple heating and cooling cycles. To increase confidence in the outcomes and to use numerical simulation reliably, the result quality Needs to be validated against experiments for in-situ and post-process cases. In this article, a validation is demonstrated
for a structural thermomechanical simulation model on an arbitrarily curved Directed Energy Deposition (DED)part: at first, the validity of the heat input is ensured and subsequently, the model’s predictive quality for in-situ
deformation and the bulging behaviour is investigated. For the in-situ deformations, 3D-Digital Image Correlation measurements are conducted that quantify periodic expansion and shrinkage as they occur. The results show a strong dependency of the local stiffness of the surrounding geometry. The numerical Simulation model is set up in accordance with the experiment and can reproduce the measured 3-dimensional in-situ displacements. Furthermore, the deformations due to removal from the substrate are quantified via 3D-scanning, exhibiting considerable distortions due to stress relaxation. Finally, the prediction of the deformed shape is discussed in regards to bulging simulation: to improve the accuracy of the calculated final shape, a novel Extension of the model relying on the modified stiffness of inactive upper layers is proposed and the experimentally observed bulging could be reproduced in the finite element model.
Laser-Metal-Deposition (LMD) and Plasma-Transferred-Arc (PTA) are well known Technologies which can be used for cladding purposes. The prime objective in combining LMD and PTA as a Hybrid Metal Deposition-Technology (HMD) is to achieve high Deposition rates at low thermal Impact. Possible applications are coatings for wear protection or repair welding for components made of steel. The two energy sources (laser and Plasma arc) build a Joint process Zone and are configurated to constitute a stable process at laser powers between 0.4-1 kW (defocused) and Plasma currents between 75-200 A. Stainless steel 316L serves as filler material. For this HMD process, a Plasma Cu-nozzle is designed and produced by powder bed based Selective Laser Melting. The potential of the HMD Technology is investigated and discussed considering existing process. This paper demonstrates how the interaction of the two energy sources effects the following application-relevant properties: Deposition rate, powder Efficiency and energy Input.
Pores in additive manufactured metal parts occur due to different reasons and affect the part Quality negatively. Few investigations on the origins of porosity are available, especially for Ni-based super alloys. This paper presents a new study to examine the influence of common processing Parameters on the Formation of pores in parts built by laser metal Deposition using Inconel 718 powder. Further, a comparison between the computed tomography (CT) and the Archimedes method was made. The Investigation Shows that CT is able to identify different kinds of pores and to give further Information about their distribution. The identification of some pores as well as their shape can be dependent on the Parameter Setting of the Analysis tool. Due to limited measurement Resolution, CT is not able to identify correctly pores with Diameters smaller than 0.1 mm, which leads to a false decrease on Overall porosity. The applied Archimedes method is unable to differentiate between gas porosity and other Kinds of holes like internal cracks or lack of Fusion, but it delivered a proper value for Overall porosity. The method was able to provide suitable data for the statistical Evaluation with design of Experiments, which revealed significant Parameters ont he Formation of pores in LMD.
In den letzten Jahren hat vor allem die Nachfrage nach additiven Fertigungstechnologien und Reparaturverfahren für Hochfeste Werkstoffe einen starken Aufschwung erlebt. Ein Verfahren, welches sich neben der Herstellung von Beschichtungen besonders für diese Anwendungen eignet, ist das Laser-Pulver-Auftragschweißen. Es wird besonders für Reparaturen bzw. zur Herstellung von teuren Bauteilen, wie Werkzeuge oder Turbinenteilen, eingesetzt. Da diese Teile oft großen mechanischen sowie thermischen Belastungen ausgesetzt sind, ist es besonders wichtig, dass die erzeugte Struktur eine hohe Qualität aufweist. In dieser Arbeit wird die statistische Versuchsplanung genutzt, um Modelle für die Oberflächenbeschaffenheiten von Inconel 718 zu generieren. Als Grundlage dient hierbei ein zentral zusammengesetzter Versuchsplan mit großem Parameterfenster. So wird die Leistung zwischen 550 Watt und 1950 Watt, der Vorschub von 530 mm/min bis 920 mm/min, der Pulvermassenstrom von 3 g/min bis 12 g/min sowie der Spotdurchmesser von 1 mm bis 2 mm variiert. Auf diese Weise wird die Spurgeometrie beeinflusst. Darüber hinaus wird das Überlappungsverhältnis zwischen 20% bis 50% verändert. Die Auswertung der Oberflächenbeschaffenheit erfolgt mit dem auf der Fokusvariation basierendem Oberflächenmessgerät Alicona Infinite-Focus. Dieses Verfahren der 3D Mikrokoordinatenmesstechnik gewährleistet eine zuverlässige Auswertung der Spurgeometrie, der Welligkeit sowie die Messung der mittleren arithmetischen Höhe Sa zur Bestimmung der Oberflächenrauheit. Anschließend werden die generierten Modelle verifiziert. Ziel dabei ist, kostenintensive Vorversuche in Zukunft einzusparen. Darüber hinaus wird das Prozessverständnis erweitert und signifikante Einflussfaktoren identifiziert.
The laser hybrid welding process offers many advantages regarding deep penetration, increased welding velocity and with the help of the supplied filler wire an improved bridgeability to gap and misalignment tolerances. High power laser systems with a power of approx. 30 kW are already available on the market. Nevertheless, multi-layer technology with an arc process is still used for welding of plates from a thickness from 20 mm. A potential cause is the process instability with increasing laser power. It is inevitable that gravity drop-out due to the high hydrostatic pressure at increasing wall thickness especially at welding in flat position and with a low welding speed. The surface tension decreases with increasing root width resulting from low welding velocities. To prevent such inadmissible defects of the seam a use of weld pool support is required. Usual weld pool support systems such as ceramic or powder supports require a mechanical detachment which is time-consuming. The electromagnetic weld pool support system described in this work shows an alternative weld pool support which works contactless. It is based on generating Lorentz forces in the weld pool due to oscillating magnetic field and induced eddy currents. This innovative technology offers single pass welds up to 28 mm in flat position and reduced welding velocity with a laser power of just 19 kW. It also leads to improved mechanical-technological properties of the seams because of the slow cooling rate. With usage of an electromagnetic weld pool support the limitation of the hybrid laser arc welding process in the thick sheet metal will be extend.