Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Erscheinungsjahr
- 2018 (40) (entfernen)
Dokumenttyp
- Zeitschriftenartikel (27)
- Beitrag zu einem Tagungsband (10)
- Vortrag (3)
Schlagworte
- Laser beam welding (6)
- Laser metal deposition (5)
- Solidification cracking (5)
- Additive manufacturing (4)
- Laser welding (4)
- Thick-walled steel (3)
- Critical strain (2)
- Electromagnetic weld pool support (2)
- Hybrid laser arc welding (2)
- Hybrid laser-arc welding (2)
- In situ strain (2)
- Laser-metal-deposition (2)
- Microstructure (2)
- Numerical simulation (2)
- Optical measurement (2)
- Single pass welding (2)
- Strain rate (2)
- 316L (1)
- 9%Ni steel (1)
- 9%Ni steel, (1)
- AM (1)
- Adaptive control (1)
- Adaptive welding beam oscillation (1)
- Additive Manufacturing (1)
- Automated manufacturing (1)
- Automatisierte Fertigung (1)
- Automotive application (1)
- Build-up strategy (1)
- Bulging (1)
- CFD model (1)
- CFD-model (1)
- Cimensional Accuracy (1)
- Clad steels (1)
- Coarse grained heat affected zone (1)
- Condition monitoring (1)
- Conventional Ni-based austenitic welding electrode (1)
- Cryogenic steel (1)
- DED (1)
- DIC (1)
- Deformed geometry (1)
- Density measurement (1)
- Deposition rate (1)
- Design of experiments (1)
- Die-cast aluminum (1)
- Digital Image Correlation (1)
- Digitalisierung (1)
- Digitization (1)
- Dimensional accuracy (1)
- Directed Energy Deposition (1)
- Dissimilar metal weld overlays (1)
- Edge effects (1)
- Electromagnetic influence (1)
- Electromagnetic support (1)
- Electromagnetic weld pool support system (1)
- Elektromagnetische Schmelzbadunterstützung (1)
- Embedded electronics (1)
- Equivalent heat source (1)
- Equivalent stress concentration factors (1)
- FE-model (1)
- Ferritic welding electrode (1)
- Ferromagnetic steels (1)
- Ferromagnetischer Stahl (1)
- Fiber laser (1)
- Finite element method (FEM) (1)
- Fresnel reflection (1)
- Full penetration (1)
- Fusion zone size (1)
- Fusion zone, nickel alloys (1)
- GMA welding (1)
- GTAW (1)
- Gap bridgeability (1)
- Gap bridging (1)
- Gleeble testing (1)
- Grade S960QL steel (1)
- Grain size (1)
- HSLA (1)
- Heat flow (1)
- High brightness (1)
- High power (1)
- High power laser beam welding (1)
- High-power fibre laser (1)
- High-power laser beam (1)
- High-strength steel sheets (1)
- Hohlprofilknoten (1)
- Hot cracking test (1)
- Hybrid-laser-arc welding (1)
- Hydrostatic and arc pressure exceed the Laplace pressure (1)
- Impact absorbed energy (1)
- Kerbspannungskonzept (1)
- Laser Metal Deposition (1)
- Laser keyhole welding (1)
- Laser surfacing (1)
- Laser- und Lichtbogenenergie (1)
- Laser-beam welding, (1)
- Laser-hybrid welding (1)
- Laser-plasma hybrid (1)
- Laserimplantation (1)
- Laserstrahlschweißen (1)
- Lichtbogensensorik (1)
- Life Cycle Assessment (LCA) Fusion welding (1)
- Life Cycle Assessment (LCA) Impact categories (1)
- Life Cycle Assessment (LCA) Schweißprozesse (1)
- Life Cycle Assessment (LCA) Umweltwirkungen (1)
- Liquid metal embrittlement (1)
- Local critical strain (1)
- Low heat input Gma welding (1)
- MAG Prozesssteuerung (1)
- MSG-Engspaltschweißen (1)
- Material modeling (1)
- Mechanical properties (1)
- Melt pool dynamics (1)
- Microstructure Tensile strength (1)
- Misalignment of edges (1)
- Multiple reflections (1)
- Narrow gap welding (1)
- Neural networks (1)
- Notch stress approach (1)
- Novel metrology (1)
- Numerical process simulation (1)
- Numerical welding simulation (1)
- Partial penetration (1)
- Pipeline (1)
- Plasma-transferred-arc (1)
- Plume heating (1)
- Porosity (1)
- Porosity reduction (1)
- Process chain (1)
- Process simulation (1)
- Profilvermessung (1)
- Pulsed laser beam welding (1)
- Residual stress (1)
- Resistance spot welding (1)
- SLM printed plasma torch (1)
- SMAW (1)
- Schweißnahtgeometrie (1)
- Secondary heat source (1)
- Selektive-laser-melting (1)
- Sensor (1)
- Sensorik (1)
- Stainless Steel (1)
- Strain-rate (1)
- Stress-strain behavior (1)
- Surface cracks (1)
- Temperature behavior (1)
- Temperature distribution (1)
- Tensile strength (1)
- Thick plates (1)
- Ti-6Al-4V (1)
- Titanium alloy (1)
- Transformable steels (1)
- Transient heat transfer (1)
- Tubular joints (1)
- Turbine components (1)
- Vapor recondensation (1)
- Vaporization (1)
- Viscoplasticity (1)
- Weld pool (1)
- Weld pool dynamics (1)
- Weld pool geometry (1)
- Weld pool shape (1)
- Weld seam geometry (1)
- Welding Simulation (1)
- Welding simulation (1)
- Zinc (1)
- Äquivalente Spannungskonzentrationsfaktoren (1)
Organisationseinheit der BAM
- 9.3 Schweißtechnische Fertigungsverfahren (40) (entfernen)
Eingeladener Vortrag
- nein (3)
A three-dimensional multi-physics numerical model was developed for the calculation of an appropriate equivalent volumetric heat source and the prediction of the transient thermal cycle during and after fusion welding. Thus the modelling process was separated into two studies. First, the stationary process simulation of full-penetration keyhole laser beam welding of a 15 mm low-alloyed steel thick plate in flat position at a welding speed of 2 m/min and a laser power of 18 kW was performed. A fixed keyhole with a right circular cone shape was used to consider the energy absorbed by the workpiece and to calibrate the model. In the calculation of the weld pool geometry and the local temperature field, the effects of phase transition, thermo-capillary convection, natural convection and temperature-dependent material properties up to evaporation temperature were taken into account. The obtained local temperature field was then used in a subsequent study as an equivalent heat source for the computation of the transient thermal field during the laser welding process and the cooling stage of the part. The system of partial differential equations, describing the stationary heat transfer and the fluid dynamics, were strongly coupled and solved with the commercial finite element software COMSOL Multiphysics 5.0. The energy input in the transient heat transfer simulation was realised by prescription of the nodes temperature. The prescribed nodes reproduced the calculated local temperature field defining the equivalent volumetric heat source. Their translational motion through the part was modelled by a moving mesh approach. An additional remeshing condition and helper lines were used to avoid highly distorted elements. The positions of the elements of the polygonal mesh were calculated with the Laplace’s smoothing approach. Good correlation between the numerically calculated and the experimentally observed weld bead shapes and transient temperature distributions was found.
The geometry of the melt pool in laser beam welding plays a major role to understand the dynamics of the melt and its solidification behavior. In this study, a butt configuration of 15 mm thick structural steel and transparent quartz glass was used to observe the weld pool geometry by means of high-speed camera and an infrared camera recording. The observations show that the dimensions of the weld pool vary depending on the depth. The areas close to the weld pool surface take a teardrop-shape. A bulge-region and its temporal evolution were observed approximately in the middle of the depth of the weld pool. Additionally, a 3D transient thermal-fluid numerical simulation was performed to obtain the weld pool shape and to understand the formation mechanism of the observed bulging effect. The model takes into account the local temperature field, the effects of phase transition, thermo-capillary convection, natural convection and temperature-dependent material properties up to evaporation temperature. The numerical results showed good accordance and were furthermore used to improve the understanding of the experimentally observed bulging effect.
In this study, a three-dimensional CFD-simulation model was developed to simulate the fluid flow in the weld pool. The CFD-model showed a bulging region in the middle of the depth, which is separated from the top surface and bottom surface by two narrowing regions. It can be concluded that the interaction of the movement of the laser source with the Marangoni vortex leads to a teardrop shape at the upper and bottom surface of the workpiece. Additionally, it shows that the bulging in the weld is a result of the backflows on the upper and lower sides due to the thermo-capillary-driven flows. The weld pool shape was used as a heat source in a two-dimensional thermomechanical model, which allows a highly accurate transformation of the weld pool dimensions obtained from the CFD model. This developed technique allows the consideration of physical aspects, which cannot be considered when using traditional heat sources. The mechanical model has shown that the chronological order of the solidification of the weld has a significant influence on the nature and distribution of the stresses in the weld. High tensile stress has been observed in the bulging region, i.e. in the susceptible region for solidification cracking, when compared to the other narrowing regions, which show compressive stress.
One of the main factors affecting the use of lasers in the industry for welding thick structures is the process accompanying solidification cracks. These cracks mostly occurring along the welding direction in the welding center, and strongly affect the safety of the welded components. In the present study, to obtain a better understanding of the relation between the weld pool geometry, the stress distribution and the solidification cracking, a three-dimensional computational fluid dynamic (CFD) model was combined with a thermo-mechanical model. The CFD model was employed to analyze the flow of the molten metal in the weld pool during the laser beam welding process. The weld pool geometry estimated from the CFD model was used as a heat source in the thermal model to calculate the temperature field and the stress development and distributions. The CFD results showed a bulging region in the middle depth of the weld and two narrowing areas separating the bulging region from the top and bottom surface. The thermo-mechanical simulations showed a concentration of tension stresses, transversally and vertically, directly after the solidification during cooling in the region of the solidification cracking.
In recent years, laser beam welding has found wide applications in many industrial fields. Solidification cracks are one of the most frequently encountered welding defects that hinder obtaining a safe weld joint. Decades of research have shown that one of the main causes of such cracks are the strain and the strain rate. Obtaining meaningful measurements of these strains has always been a major challenge for scientists, because of the specific environment of the measurement range and the many obstacles, as well as the high temperature and the plasma plume. In this study, a special experimental setup with a high-speed camera was employed to measure the strain during the welding process. The hot cracking susceptibility was investigated for 1.4301 stainless steel, and the critical strain required for solidification crack formation was locally and globally determined.
This paper represents the results for proposed optical flow method based on the Lucas-Kanade (LK) algorithm applied to two different problems. The following observations can be made:
- The estimated strain and displacement for conducted tensile test are generally very close to those measured with conventional DIC-technique.
- The LK technique allows measurement of strain or displacement without special selection of a region of interest.
Using a novel optical measurement technique together with the optical flow algorithm, a twodimensional deformation analysis during welding was conducted. This technique is the first to provide a measurement of the full strain field locally in the immediate vicinity of the solidification front. Additionally, the described procedure of the optical measurement allows the real material-dependent values of critical strain characterizing the transition to hot cracking during laser welding processes to be determined.
Due to rapid, localized heating and cooling, distortions accumulate in additive manufactured laser metal deposition (LMD) components, leading to a loss of dimensional accuracy or even cracking. Numerical welding simulations allow the prediction of these deviations and their optimization before conducting experiments. To assess the viability of the simulation tool for the use in a predictive manner, comprehensive systems as well as to choose the optimal product matches, product analysis methods are needed. Indeed, most of the known methods aim to analyze a product or one product family on the physical level. Different product families, however, may differ largely in terms of the number and nature of components. This fact impedes an efficient comparison and choice of appropriate product family combinations for the production system. A new methodology is proposed to analyze existing products in view of their functional and physical architecture. The aim is to Cluster these products in new assembly oriented product families for the optimization.
Distortions in Additive Manufacturing (AM) Laser Metal Deposition (LMD) occur in the newly-built component due to rapid heating and solidification and can lead to shape deviations and cracking. This paper presents a novel approach to quantify the distortions experimentally and to use the results in numerical simulation validation. Digital Image Correlation (DIC) is applied together with optical filters to measure in-situ distortions directly on a wall geometry produced with LMD. The wall shows cyclic Expansion and shrinking with the edges bending inward and the top of the sample exhibiting a slight u-shape as residual distortions. Subsequently, a structural Finite Element Analysis (FEA) of the experiment is established, calibrated against experimental temperature profiles and used to predict the in-situ distortions of the sample. A comparison of the experimental and numerical results reveals a good agreement in length direction of the sample and quantitative deviations in height direction, which are attributed to the material model used. The suitability of the novel experimental approach for measurements on an AM sample is shown and the potential for the validated numerical model as a predictive tool to reduce trial-and-error and improve part quality is evaluated.
Hybrides Auftragschweißen: Potentiale des laserunterstützten Plasma-Pulver-Auftragschweißens (PTA)
(2018)
In diesem Beitrag wurden Untersuchungen zu einem neuartigen hybriden Laser-Plasma-Beschichtungsverfahren vorgestellt. Mit dem Ziel, die Produktivität und Wirtschaftlichkeit von Korrosions- und Verschleißschutzschichten zu steigern, wurde das kostengünstige PTA-Verfahren durch einen Laser als zweite Energiequelle ergänzt. Die vorlaufende Laserstrahlung stabilisiert den Plasmalichtbogen und ermöglicht erst eine Auftragsschweißung bei hohen Geschwindigkeiten. Die hohen Auftragraten von 4,2-5,7 kg/h bei gleichzeitig Streckenenergien von 630-720 J/cm zeigen das mögliche Potential des vorgestellten hybriden Ansatzes. In weiteren Untersuchungen muss der Prozess z.B. in Bezug auf die Oberflächenwelligkeit der Beschichtungen über eine Parameteroptimierung weiter verbessert werden. Nach den bisherigen gesammelten Erfahrungen mit dem Hybridprozess ist davon auszugehen, dass durch eine Anpassung der Energiedichteverteilung das Lasers, die Prozessgeschwindigkeiten noch einmal gesteigert werden können.
Laser-Metal-Deposition (LMD) and Plasma-Transferred-Arc (PTA) are well known Technologies which can be used for cladding purposes. The prime objective in combining LMD and PTA as a Hybrid Metal Deposition-Technology (HMD) is to achieve high Deposition rates at low thermal Impact. Possible applications are coatings for wear protection or repair welding for components made of steel. The two energy sources (laser and Plasma arc) build a Joint process Zone and are configurated to constitute a stable process at laser powers between 0.4-1 kW (defocused) and Plasma currents between 75-200 A. Stainless steel 316L serves as filler material. For this HMD process, a Plasma Cu-nozzle is designed and produced by powder bed based Selective Laser Melting. The potential of the HMD Technology is investigated and discussed considering existing process. This paper demonstrates how the interaction of the two energy sources effects the following application-relevant properties: Deposition rate, powder Efficiency and energy Input.