Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Dokumenttyp
- Zeitschriftenartikel (135)
- Beitrag zu einem Tagungsband (69)
- Vortrag (27)
- Forschungsbericht (4)
- Posterpräsentation (1)
Schlagworte
- Laser beam welding (56)
- Additive manufacturing (13)
- Laser metal deposition (12)
- Microstructure (11)
- Numerical simulation (11)
- Solidification cracking (11)
- DED (10)
- Laserstrahlschweißen (10)
- Mechanical properties (10)
- Additive Manufacturing (9)
- Hybrid laser-arc welding (8)
- Laser welding (8)
- Numerical modeling (8)
- Thick-walled steel (8)
- Weld pool shape (8)
- Additive Fertigung (7)
- Porosity (7)
- Resistance spot welding (7)
- Element transport (6)
- Hybrid laser arc welding (6)
- Laserhybridschweißen (6)
- Magnetohydrodynamics (6)
- AM (5)
- Artificial neural network (5)
- Directed Energy Deposition (5)
- Gründungsstrukturen (5)
- Hochfester Stahl (5)
- Hybrid Laser Arc Welding (5)
- Liquid metal embrittlement (5)
- Magnetic field (5)
- Solidification (5)
- Widerstandspunktschweißen (5)
- Crack (4)
- Critical strain (4)
- Deep penetration (4)
- Deep penetration laser beam welding (4)
- Directed energy deposition (4)
- Endkrater (4)
- Grain refinement (4)
- High power laser beam welding (4)
- Inconel 718 (4)
- Laser Metal Deposition (4)
- Laser hybrid welding (4)
- Liquid Metal Embrittlement (4)
- Offshore Windenergieanlagen (4)
- Simulation (4)
- Weld pool dynamics (4)
- 9%Ni steel (3)
- Automatisierte Fertigung (3)
- Bulging effect (3)
- Cryogenic steel (3)
- Crystal branch development (3)
- Electromagnetic Weld Pool Support (3)
- Elektromagnetische Schmelzbadunterstützung (3)
- End crater (3)
- Equivalent heat source (3)
- Full Penetration (3)
- Gap bridgeability (3)
- Heat conduction (3)
- Künstliche Intelligenz (3)
- Laser energy distribution (3)
- Laser-Pulver-Auftragschweißen (3)
- Laserimplantation (3)
- Leichtbau (3)
- Mathematical modeling (3)
- Mechanical mismatching (3)
- Molten pool dynamics (3)
- Multi-physical modelling (3)
- Numerical modelling (3)
- Numerical process simulation (3)
- Partial penetration (3)
- Periodic solidification pattern (3)
- Process simulation (3)
- Quality assurance (3)
- Ray tracing (3)
- Rundnaht (3)
- Thick Materials (3)
- Welding simulation (3)
- AISI D2 (2)
- Advanced high strength steel (2)
- Advanced high strength steels (2)
- Auftragschweißen (2)
- Automatisierte schweißtechnische Fertigung (2)
- Bulge effect (2)
- Bulge formation (2)
- Charpy impact toughness (2)
- Circumferential weld (2)
- DED-EB (2)
- Data preparation (2)
- Defokussierung (2)
- Digitalisierung (2)
- Dimensional accuracy (2)
- Directed Enery Deposition (2)
- Dissimilar metal weld overlays (2)
- Dual phase steel (2)
- Duplex AISI 2205 (2)
- EBAM (2)
- Edge quality (2)
- Electromagnetic backing (2)
- Electromagnetic support (2)
- Electromagnetic weld pool support (2)
- Electron beam welding (2)
- Elektronenstrahlschweißen (2)
- FGM (2)
- Flüssigmetallinduzierte Rissbildung (2)
- Full penetration (2)
- Grain size (2)
- Hardness (2)
- Heat treatment (2)
- High-power laser beam welding (2)
- Hot crack (2)
- Hot cracking (2)
- Hybrid welding (2)
- In situ strain (2)
- Keyhole collapse (2)
- Keyhole mode welding (2)
- LME (2)
- Laser-Hybridschweißen (2)
- Laser-metal-deposition (2)
- Matching ferritic welding electrode (2)
- Melt pool dinamics (2)
- Melt pool dynamics (2)
- Metal mixing (2)
- Neuronales Netz (2)
- Nickel (2)
- Optical measurement (2)
- Oscillating magnetic field (2)
- Oscillating vapor plume (2)
- Path planning (2)
- Pipe manufacturing (2)
- Preheating (2)
- Process monitoring (2)
- RSW (2)
- Refill friction stir spot welding (2)
- SMAW (2)
- Schweißnahtbewertung (2)
- Selective Laser Melting (2)
- Single pass welding (2)
- Stainless Steel (2)
- Strain rate (2)
- Submerged arc welding (2)
- Superellipse (2)
- Testing method (2)
- Thermal cycles (2)
- Thermo-fluid flow (2)
- Ti-6Al-4V (2)
- TiB2 (2)
- Transient heat transfer (2)
- Umweltwirkungen (2)
- Verfahrensvergleich (2)
- WAAM (2)
- Weld defects (2)
- Welding thermal cycle (2)
- Wire arc additive manufacturing (2)
- Wire electron beam additive manufacturing (2)
- Zinc coated steel (2)
- Zink (2)
- Ökobilanzierung (2)
- Überlappbereich (2)
- 316L (1)
- 9%Ni steel, (1)
- AC magnetic field (1)
- AGIL (1)
- AHSS (1)
- AM feature integration (1)
- Adaptive control (1)
- Adaptive welding beam oscillation (1)
- Advanced High-Strength Steel (AHSS) (1)
- Advanced high-strength steel (1)
- Advanced high-strength steels (1)
- Al-Mg-Si-Legierungen (1)
- Al/Mg alloys (1)
- AlMg0.7SiTiB filler wire (1)
- Alloy 247 (1)
- Aluminium-Druckguss (1)
- Aluminum alloys (1)
- Aluminum bronze (1)
- Analytical model (1)
- Artificial Intelligence (1)
- Artungleiche Werkstoffe (1)
- As-shielded arc welding (1)
- Aufgelöste Tragstrukturen (1)
- Auftriebskräfte (1)
- Austenitic welding electrode (1)
- Automated manufacturing (1)
- Automated welding (1)
- Automatisierte schweißtechniche Fertigung (1)
- Automobilindustrie (1)
- Automotive application (1)
- Bending test (1)
- Bewegtes Gitter (1)
- Bionik (1)
- Boundary element method (1)
- Build-up strategy (1)
- Bulging (1)
- Bulging effects (1)
- CFD model (1)
- CFD-model (1)
- Calculation time (1)
- Carbon dioxide footprint (1)
- Cimensional Accuracy (1)
- Circumferential welds (1)
- Clad steels (1)
- Clustering (1)
- Coarse grained heat affected zone (1)
- Coarse-grained heat-affected zone (1)
- Columnar crystal growth (1)
- Computer vision (1)
- Condition monitoring (1)
- Conventional Ni-based austenitic welding electrode (1)
- Convolutional neural network (1)
- Cracking (1)
- Crater (1)
- Cryogenic Steel (1)
- CuSn1 (1)
- DED-LB (1)
- DIC (1)
- Damage prediction (1)
- Deep learning (1)
- Deformed geometry (1)
- Dendrite growth (1)
- Density measurement (1)
- Deposition rate (1)
- Deposition welding (1)
- Design of experiments (1)
- Dickblech (1)
- Die-cast aluminum (1)
- Die-casted aluminum (1)
- Digital Image Correlation (1)
- Digitalization (1)
- Digitization (1)
- Direct Energy Deposition (1)
- Direct Laser Metal Deposition (1)
- Direct energy deposition (1)
- Directed Energy Depositio (1)
- Dissimilar joints (1)
- Distortion (1)
- Distortion simulation (1)
- Duplex (1)
- Duplex steels (1)
- EBSD (1)
- Edge effects (1)
- Efficient modelling (1)
- Eindringprüfung (1)
- Electro-thermomechnical model (1)
- Electrode geometry (1)
- Electromagnetic (1)
- Electromagnetic influence (1)
- Electromagnetic stirring (1)
- Electromagnetic supported degassing (1)
- Electromagnetic weld pool support system (1)
- Electron beam (1)
- Elektonenstrahlschweißen (1)
- Elektromagnetische Badstütze (1)
- Elektromagnetische Porenreduktion (1)
- Elektromagnetische Schmelzbadbeeinflussung (1)
- Elektromagnetische Schmelzbadsicherung (1)
- Elektromagnetische Schmelzbadstütze (1)
- Embedded electronics (1)
- End-crater (1)
- Energy parameters of the arc (1)
- Environmental impact categories (1)
- Equivalent stress concentration factors (1)
- FE-model (1)
- FEM (1)
- Fatigue tests (1)
- Ferritic welding electrode (1)
- Ferromagnetic steels (1)
- Ferromagnetischer Stahl (1)
- Fiber laser (1)
- Filler material distribution (1)
- Filler wire (1)
- Filler wire mixing (1)
- Fine-grained Steel (1)
- Finite Element Method (1)
- Finite element method (1)
- Finite element method (FEM) (1)
- Finite element simulation (1)
- Flange width (1)
- Flüssigmetallversprödung (1)
- Forschungsdatenmanagement (1)
- Fresnel reflection (1)
- Friction stir welding (1)
- Functionally Graded Materials (1)
- Funktionally Graded Material (1)
- Fusion zone (1)
- Fusion zone profile (1)
- Fusion zone size (1)
- Fusion zone, nickel alloys (1)
- Fügequalität (1)
- Fügetechnologie (1)
- GMA welding (1)
- GTAW (1)
- Galvanized steel (1)
- Gap bridging (1)
- Gas shielded arc welding (1)
- General analytical solutions (1)
- Gleeble (1)
- Gleeble testing (1)
- Grade S960QL steel (1)
- Grain structure (1)
- Greens function method (1)
- HSLA (1)
- Hardly separable problem (1)
- Heat Input (1)
- Heat Treatment (1)
- Heat flow (1)
- Heat input (1)
- Heissrisse (1)
- Heißrisse (1)
- Heißzug (1)
- High brightness (1)
- High power (1)
- High process speeds (1)
- High speed laser cladding (1)
- High strength steels (1)
- High-Power Welding (1)
- High-power fibre laser (1)
- High-power laser (1)
- High-power laser beam (1)
- High-strength fine-grained steels (1)
- High-strength low-alloy steel (1)
- High-strength steel sheets (1)
- Highspeed-plasma-laser-cladding (1)
- Hochleistungslaserstrahlschweißen (1)
- Hochleistungsschweißen (1)
- Hohlprofilknoten (1)
- Hold time (1)
- Hot Cracks (1)
- Hot cracking test (1)
- Hybrid Laser-Arc Welding (1)
- Hybrid components (1)
- Hybrid-laser-arc welding (1)
- Hybridschweißen (1)
- Hydrostatic and arc pressure exceed the Laplace pressure (1)
- Impact absorbed energy (1)
- Implementierung (1)
- Inconel 625 (1)
- Inconel 939 (1)
- Industrial and Manufacturing Engineering (1)
- Instumented indentation test (1)
- Integrated alignment features (1)
- KI (1)
- Kaltzähe Stähle (1)
- Kerbspannungskonzept (1)
- Keyhole mode laser beam welding (1)
- Keyhole stability (1)
- Kl (1)
- Knotenweise Zwangsbedingungen (1)
- Körperschall (1)
- Künstliche Neuronale Netze (1)
- L-PBF (1)
- LMD (1)
- LPA (1)
- Lamé curves (1)
- Lamé curves approximation (1)
- Laser (1)
- Laser Beam Welding (1)
- Laser Metal Deposition (LMD) (1)
- Laser Metal Deposition; Laser Beam Welding; Duplex; Stainless Steel (1)
- Laser Powder Bed Fusion (1)
- Laser cutting (1)
- Laser implantation (1)
- Laser keyhole welding (1)
- Laser melting (1)
- Laser metal deposition (LMD) (1)
- Laser powder bed fusion (1)
- Laser powder-based directed energy deposition (1)
- Laser surfacing (1)
- Laser- und Lichtbogenenergie (1)
- Laser-Pulver-Auftragschweißen (LPA) (1)
- Laser-Pulver-Auftragschweißen; Laserstrahlschweißen, Duplex, Pufferschichten (1)
- Laser-beam welding, (1)
- Laser-hybrid welding (1)
- Laser-plasma hybrid (1)
- Laserdispergieren (1)
- Laserpulverauftragschweißen (1)
- Leichtbauprinzipien (1)
- Lichtbogensensorik (1)
- Life Cycle Assessment (LCA) Fusion welding (1)
- Life Cycle Assessment (LCA) Impact categories (1)
- Life Cycle Assessment (LCA) Schweißprozesse (1)
- Life Cycle Assessment (LCA) Umweltwirkungen (1)
- Life cycle assessment (1)
- Lightweight principles (1)
- Liquid Metal Embrittlement (LME) (1)
- Local critical strain (1)
- Local fatigue spproaches (1)
- Low Temperature Toughness (1)
- Low feed rates (1)
- Low heat input GMA welding (1)
- Low heat input Gma welding (1)
- MAG Prozesssteuerung (1)
- MHD (1)
- MSG-Engspaltschweißen (1)
- MSG-Schweißen (1)
- Magnesium Alloy (1)
- Magnesium alloy (1)
- Magnetic bath support (1)
- Maritime Components (1)
- Matching ferritic filler metal (1)
- Material modeling (1)
- Mechanical Properties (1)
- Mechanical properties of the joints (1)
- Mechanical property (1)
- Mechanical-technological properties (1)
- Mechanisch technologische Kennwerte (1)
- Metallic vapour plume (1)
- Microstructure Tensile strength (1)
- Misalignment of edges (1)
- Misalignment of the edges (1)
- Mittelrippendefekt (1)
- Model calibration (1)
- Model order reduction (1)
- Modellierung (1)
- Molten pool behaviour (1)
- Moving mesh (1)
- Multi - physical modeling (1)
- Multi-materials joining (1)
- Multiple reflections (1)
- Narrow gap welding (1)
- Neural networks (1)
- Ni-based austenitic filler metal (1)
- Ni-based austenitic welding electrode (1)
- Ni-based superalloy (1)
- NiCrBSi (1)
- Nickel alloys (1)
- Nickel-based superalloy (1)
- Nickelbasis-Superlegierungen (1)
- Notch stress approach (1)
- Novel metrology (1)
- Numerical Simulation (1)
- Numerical analysis (1)
- Numerical simulations (1)
- Numerical welding simulation (1)
- Numerical welding simulations (1)
- Numerische ISmulation (1)
- Offshore Windenergie (1)
- Offshore wind turbines (1)
- Open science (1)
- Open source (1)
- OpenScience (1)
- Optical flow (1)
- Optical measurment technique (1)
- Optische Emissionsspektroskopie (OES) (1)
- Partial penetration welding (1)
- Pearlitic microstructure (1)
- Penetration depth (1)
- Phase field method (1)
- Pipe Welding (1)
- Pipe weld preparation (1)
- Pipeline (1)
- Pipeline steel X120 (1)
- Pipeline steel of grade X120 (1)
- Plane crystalization (1)
- Plasma cutting (1)
- Plasma-Transferred-Arc (1)
- Plasma-cut samples (1)
- Plasma-cutting (1)
- Plasma-transferred-arc (1)
- Plastic deformation (1)
- Plume heating (1)
- Porosity reduction (1)
- Porosität (1)
- Post-weld heat treatment (1)
- Powder Analysis (1)
- Precipitation hardening aluminum alloys (1)
- Preheatin (1)
- Process chain (1)
- Profilvermessung (1)
- Proper generalized decomposition (1)
- Prozesskette (1)
- Prozesssimulation (1)
- Prozessüberwachung (1)
- Prüfverfahren (1)
- Pufferschichten (1)
- Pulsed laser beam welding (1)
- Qualität (1)
- Qualitätssicherung (1)
- Rail tracks (1)
- Ray teacing (1)
- Ray tracing method (1)
- Ray-tracing (1)
- Ray-tracing methods (1)
- Recycling (1)
- Research data management (1)
- Residual stress (1)
- Resistance Spot Welding (RSW) (1)
- Rundnähte (1)
- SLM printed plasma torch (1)
- Schallemissionsanalyse (SEA) (1)
- Schutzgas (1)
- Schutzgasschweißen (1)
- Schweißeignung (1)
- Schweißen von kaltzähen Stählen (1)
- Schweißnahtgeometrie (1)
- Schweißprozesse (1)
- Schweißsimulation (1)
- Schweißstruktursimulation (1)
- Schweißtechnik (1)
- Schweißunregelmäßigkeiten (1)
- Seam geometry (1)
- Secondary heat source (1)
- Selektive-laser-melting (1)
- Sensor (1)
- Sensorik (1)
- Ship building (1)
- Shipbuilding steel (1)
- Single-pass welding (1)
- Software (1)
- Solidification behaviour (1)
- Solidification craking (1)
- Stahl und Aluminium (1)
- Stainless steels (1)
- Steady-state weld pool (1)
- Steel (1)
- Steel and Al (1)
- Strain fields prediction (1)
- Strain measurement (1)
- Strain-rate (1)
- Stress-strain behavior (1)
- Superalloy (1)
- Superelliptic Lamé curves (1)
- Support structures (1)
- Surface cracks (1)
- Surface texturing (1)
- TIG welding (1)
- Technical crack detection (1)
- Temperature behavior (1)
- Temperature distribution (1)
- Tensile properties (1)
- Tensile resistance spot welding experiment (1)
- Tensile strength (1)
- Texture (1)
- Thermo-capillary convection (1)
- Thermo-fluid dynamics (1)
- Thermographie (1)
- Thermography (1)
- Thick materials (1)
- Thick plate welding (1)
- Thick plates (1)
- Thick steel plates (1)
- Thick-Walled Steel (1)
- Thick-plate welding (1)
- Thick-walled Structures (1)
- Thin steel plates (1)
- Three-dimensional crystallization (1)
- Titanium alloy (1)
- Toughness (1)
- Transformable steels (1)
- Tubular X-joints (1)
- Tubular joints (1)
- Tungsten carbide (1)
- Turbine components (1)
- Turbulence (1)
- Two-dimensional solidification (1)
- Two-run welding technique (1)
- Ultrasonic vibration (1)
- Unterpulverschweißen (1)
- V-notch impact toughness (1)
- Vapor recondensation (1)
- Vaporization (1)
- Verzug (1)
- Viscoplasticity (1)
- WEBAM (1)
- Wear resistance (1)
- Weld end crater (1)
- Weld imperfections (1)
- Weld pool (1)
- Weld pool behavior (1)
- Weld pool geometry (1)
- Weld pool modeling (1)
- Weld pool shape approximation (1)
- Weld root (1)
- Weld seam geometry (1)
- Weldability (1)
- Welding (1)
- Welding Current (1)
- Welding Simulation (1)
- Welding parameter (1)
- Welding process simulation (1)
- Weldx (1)
- Widerstandpunktschweißen (1)
- Windkraftanlagen (1)
- Wineglass shape (1)
- Wire Electron Beam Additive Manufacturing (1)
- Wire feed laser beam welding (1)
- Wire-based additive manufacturing (1)
- Wärmenachbehandlung (1)
- X8Ni9 (1)
- Zinc (1)
- Zinkbeschichtung (1)
- deposition welding (1)
- digital image correlation (1)
- dual phase steel (1)
- highspeed plasma laser cladding (1)
- laser energy distribution (1)
- laser hybrid welding (1)
- resistance spot welding (1)
- thermal cycles (1)
- thick plate welding (1)
- Äquivalente Spannungskonzentrationsfaktoren (1)
- Äquivalente Wärmequelle (1)
- Ökonomische und ökologische Vorteile (1)
- ГИДРОДИНАМИКА (1)
- КОНВЕКЦИЯ (1)
- ЛАЗЕРНАЯ СВАРКА (1)
- МЕТОД КОНЕЧНЫХ ЭЛЕМЕНТОВ (1)
- СВАРОЧНАЯ ВАННА (1)
- ТЕМПЕРАТУРНОЕ ПОЛЕ (1)
- ТЕПЛОПРОВОДНОСТЬ (1)
- ЧИСЛЕННОЕ МОДЕЛИРОВАНИЕ (1)
Organisationseinheit der BAM
- 9.3 Schweißtechnische Fertigungsverfahren (236) (entfernen)
Eingeladener Vortrag
- nein (27)
Automatisierungs- und Regelkonzepte für das MSG-Engspaltschweißen - Pendel- und Füllgradregelung
(2018)
Das MSG-Engspaltschweißen eignet sich auf Grund der I-Nahtvorbereitung besonders für das wirtschaftliche Fügen bei hohen Blechdicken über 100 mm und bietet darüber hinaus zusätzliche technologische Vorteile. Für die automatisierte Anwendung des Verfahrens unter Produktionsbedingungen muss dabei die Prozesssicherheit auch für mitunter große Variationen der Spaltbreite entlang der Schweißnaht gesichert bleiben. In erster Linie betrifft dies bei mechanischer Auslenkung der Drahtelektrode die Adaption der Pendelbewegung auf die jeweilige Spaltbreite um eine ausreichende Flankenanbindung zu garantieren. Für die Online-Regelung der Pendelbewegung mittels Lichtbogensensorik wurde eine Methode implementiert die die notwendigen Pendelwinkel an jeder Nahtflanke unabhängig ermittelt und darüber hinaus Fehlstellungen des Brenners sowie Veränderungen des Kontaktrohrabstandes und der Prozessparameter eigenständig kompensiert. Eine Füllgradregelung auf Grundlage optischer Erfassung und Auswertung der Schweißnahtgeometrie wurde zusätzlich eingesetzt um bei veränderlichen Nahtquerschnittsflächen einen vorgegebenen, gleichbleibenden Lagenaufbau zu erzielen.
Partial penetration welding with fiber laser on 20mm thick plates was carried out in horizontal position to study the role of secondary heating in modeling of high power fiber laser welding. Experiments were carried out using 18.8kW laser with 1.5 m/min welding speed at Ar assist gas flow rates of 0, 17, 29, and 40 l/min, all four cases show similar bead shape with bright emission of vapor plume. Numerical simulations were performed using volume of fluid method by considering three different models as models A–C. Model A considers only Fresnel reflection inside the keyhole using real time tracking of free surface. Model B considers vapor recondensation flux inside keyhole along with model A. Finally, model C is used, which considers vapor plume heating at 4100K temperature along with models A B. Secondary heating by recondensation and vapor plume is vital in modeling of high power fiber laser welding; especially, the upper part of the bead is more influenced due to secondary heating. Tungsten particles are also used to visualize the flow pattern of melt pool.
Das bislang zur Vermeidung unzulässiger Wurzelüberhöhungen beim Laserstrahlschweißen von Aluminiumlegierungen bzw. austenitischem Stahl eingesetzte Verfahren der elektromagnetischen Schmelzbadstütze konnte innerhalb der vorliegenden Untersuchung erfolgreich zur Kompensation des hydrostatischen Druckes von ferromagnetischen Stählen übertragen werden. Es wurden dabei Laserstrahlschweißversuche in PA-Position an bis zu 20 mm dickem Duplexstahl 1.4462 sowie Baustahl S235JR durchgeführt. Unter konstanten Schweißparametern wurden Durchschweißungen generiert. Dem hydrostatischen Druck wurde unter Verwendung der Technologie zur elektromagnetischen Schmelzbadunterstützung durch Variation der Oszillationsfrequenz und der AC-Leistung des Magnetsystems entgegengewirkt.
Zunächst konzentrierten sich die Versuche auf den Duplexstahl 1.4462, welcher jeweils aus 50 % Ferrit und Austenit besteht. Hierbei konnte festgestellt werden, dass zur idealen Kompensation von 15 mm bei einer Frequenz von 1,7 kHz eine AC-Leistung von 1,6 kW erforderlich ist, die Schweißnähte aber bereits bei einer AC-Leistung von ca. 0,8 kW in die Bewertungsgruppe B der DIN EN ISO 13919-1:1996-09 eingeordent werden können. Zur idealen Kompensation des hydrostatischen Druckes bei 20 mm dickem Duplexstahl war eine um 20 % höhere AC-Leistung notwendig. Im Anschluss an die Versuche mit dem Duplexstahl wurden die Untersuchungen auf bis zu 20 mm dicke Proben aus Baustahl S235JR erweitert. Für 15 mm konnten die Schweißnähte bei einer Frequenz von 1,7 kHz ab einer AC-Leistung von 1,3 kW in die Bewertungsgruppe B eingeordnet werden. Zur idealen Kompensation von 20 mm dickem Baustahl war eine AC-Leistung von 1,6 kW bei einer Frequenz von 636 Hz nötig. Mit steigender AC-Leistung konnte in allen Versuchsreihen eine sukzessive Verringerung
der Wurzelüberhöhung demonstriert werden.
A three-dimensional multi-physics numerical model was developed for the calculation of an appropriate equivalent volumetric heat source and the prediction of the transient thermal cycle during and after fusion welding. Thus the modelling process was separated into two studies. First, the stationary process simulation of full-penetration keyhole laser beam welding of a 15 mm low-alloyed steel thick plate in flat position at a welding speed of 2 m/min and a laser power of 18 kW was performed. A fixed keyhole with a right circular cone shape was used to consider the energy absorbed by the workpiece and to calibrate the model. In the calculation of the weld pool geometry and the local temperature field, the effects of phase transition, thermo-capillary convection, natural convection and temperature-dependent material properties up to evaporation temperature were taken into account. The obtained local temperature field was then used in a subsequent study as an equivalent heat source for the computation of the transient thermal field during the laser welding process and the cooling stage of the part. The system of partial differential equations, describing the stationary heat transfer and the fluid dynamics, were strongly coupled and solved with the commercial finite element software COMSOL Multiphysics 5.0. The energy input in the transient heat transfer simulation was realised by prescription of the nodes temperature. The prescribed nodes reproduced the calculated local temperature field defining the equivalent volumetric heat source. Their translational motion through the part was modelled by a moving mesh approach. An additional remeshing condition and helper lines were used to avoid highly distorted elements. The positions of the elements of the polygonal mesh were calculated with the Laplace’s smoothing approach. Good correlation between the numerically calculated and the experimentally observed weld bead shapes and transient temperature distributions was found.
Recently developed fibre lasers provide multi-kilowatt beam power with high quality at impressive energy efficiency. Combined with gas metal arc welding (GMAW) equipment these lasers can be used in a hybrid process to weld thick-walled constructions single-pass, that are currently welded using multi-pass techniques. The main benefits are a reduction of heat induced distortions, due to the low heat input, as well as savings in filler material and process time. Probable applications can be found in power generation, ship building and pipeline constructions. An orbital (girth) laser-hybrid process using a 20 kW fibre laser and a GMAW torch is currently examined at the BAM, Berlin. The aim of this research is to obtain a stable and crack free girth welding process and to demonstrate its application in pipeline construction. The experiments are carried out on 16 mm thick plates as well pipe rings with 36" (914 mm) pipe diameter of X65. Particular welding parameters, such as welding speed, GMAW power, arc length are varied and their influence on the appearance of the weld in the different welding positions is analyzed. Even though issues remain that demand further research it could already be shown that the rings can be welded using a girth hybrid process that is divided into two half girth processes in downward direction.
One of the main factors affecting the use of lasers in the industry for welding thick structures is the process accompanying solidification cracks. These cracks mostly occurring along the welding direction in the welding center, and strongly affect the safety of the welded components. In the present study, to obtain a better understanding of the relation between the weld pool geometry, the stress distribution and the solidification cracking, a three-dimensional computational fluid dynamic (CFD) model was combined with a thermo-mechanical model. The CFD model was employed to analyze the flow of the molten metal in the weld pool during the laser beam welding process. The weld pool geometry estimated from the CFD model was used as a heat source in the thermal model to calculate the temperature field and the stress development and distributions. The CFD results showed a bulging region in the middle depth of the weld and two narrowing areas separating the bulging region from the top and bottom surface. The thermo-mechanical simulations showed a concentration of tension stresses, transversally and vertically, directly after the solidification during cooling in the region of the solidification cracking.
Electromagnetic weld pool support system is illustrated successfully for hybrid laser arc welding of 20 -30 mm ferromagnetic Steels Welding of thick-walled steels in flat position and reduced welding velocities is possible Gap and misalignment between welded plates can be tolerated by use of this Technology Opportunity to reduce the laser beam power because of reduced welding velocity respectively increase of weldable material thickness with a 20 kW- fibre laser Mechanical properties of welds are in correspondence with requirements of Standards.
Hybrides Auftragschweißen: Potentiale des laserunterstützten Plasma-Pulver-Auftragschweißens (PTA)
(2018)
In diesem Beitrag wurden Untersuchungen zu einem neuartigen hybriden Laser-Plasma-Beschichtungsverfahren vorgestellt. Mit dem Ziel, die Produktivität und Wirtschaftlichkeit von Korrosions- und Verschleißschutzschichten zu steigern, wurde das kostengünstige PTA-Verfahren durch einen Laser als zweite Energiequelle ergänzt. Die vorlaufende Laserstrahlung stabilisiert den Plasmalichtbogen und ermöglicht erst eine Auftragsschweißung bei hohen Geschwindigkeiten. Die hohen Auftragraten von 4,2-5,7 kg/h bei gleichzeitig Streckenenergien von 630-720 J/cm zeigen das mögliche Potential des vorgestellten hybriden Ansatzes. In weiteren Untersuchungen muss der Prozess z.B. in Bezug auf die Oberflächenwelligkeit der Beschichtungen über eine Parameteroptimierung weiter verbessert werden. Nach den bisherigen gesammelten Erfahrungen mit dem Hybridprozess ist davon auszugehen, dass durch eine Anpassung der Energiedichteverteilung das Lasers, die Prozessgeschwindigkeiten noch einmal gesteigert werden können.
An approach to develop an arc sensor for gap width estimation during automated NG-GMAW with a weaving electrode motion is introduced by combining arc sensor readings with optical measurements of the groove shape to allow precise analyses of the process. The two test specimen welded for this study were designed to feature a variable groove geometry in order to maximize efficiency of the conducted experimental efforts, resulting in 1696 individual weaving cycle records with associated arc sensor measurements, process parameters and groove shape information. Gap width was varied from 18 mm to 25 mm and wire feed rates in the range of 9 m/min to 13 m/min were used in the course of this study. Artificial neural networks were applied as a modelling tool to derive an arc sensor for estimation of gap width suitable for online process control that can adapt to changes in process parameters as well as changes in the weaving motion of the electrode. Wire feed rate, weaving current, sidewall dwell currents and angles were defined as inputs to calculate the gap width. The evaluation of the proposed arc sensor model shows very good estimation capabilities for parameters sufficiently covered during the experiments.
In recent years, laser beam welding has found wide applications in many industrial fields. Solidification cracks are one of the most frequently encountered welding defects that hinder obtaining a safe weld joint. Decades of research have shown that one of the main causes of such cracks are the strain and the strain rate. Obtaining meaningful measurements of these strains has always been a major challenge for scientists, because of the specific environment of the measurement range and the many obstacles, as well as the high temperature and the plasma plume. In this study, a special experimental setup with a high-speed camera was employed to measure the strain during the welding process. The hot cracking susceptibility was investigated for 1.4301 stainless steel, and the critical strain required for solidification crack formation was locally and globally determined.