Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Erscheinungsjahr
Dokumenttyp
Sprache
- Englisch (54)
Referierte Publikation
- ja (54) (entfernen)
Schlagworte
- Nanoparticles (15)
- Electron microscopy (10)
- Nanomaterials (4)
- SEM (4)
- Sample preparation (4)
- Shape (4)
- Spectroscopic ellipsometry (4)
- Titanium dioxide (4)
- Nanotechnology (3)
- Size (3)
- Advanced materials (2)
- Bisphenol A (2)
- Characterisation (2)
- Concentration (2)
- EDS (2)
- EPMA (2)
- Elemental composition (2)
- Image analysis (2)
- Katalysator (2)
- Multi-sample analysis (2)
- Nano (2)
- Particle (2)
- Particle size (2)
- Photooxidation (2)
- Porous materials (2)
- Quantum dots (2)
- SAXS (2)
- Standardization (2)
- Standards (2)
- Surface chemical analysis (2)
- Thin films (2)
- ToF-SIMS (2)
- X-ray photoelectron spectroscopy (2)
- ACEnano (1)
- AFM (1)
- Absorption spectrometry (1)
- Abwasser (1)
- Advanced material (1)
- Amorphous phases (1)
- Amperometry (1)
- Artificial intelligence (1)
- Atomic force microscopy (1)
- Auger Electron Spectroscopy (1)
- Automated image analysis (1)
- Automation (1)
- Bearing steel (1)
- Benchmarking (1)
- Bipyramid (1)
- Boehmite (1)
- Boehmite nanoparticles (1)
- Brunauer-Emmett-Teller (1)
- CEN (1)
- Calcium monofluoride (1)
- Catalysis (1)
- Cationic photocuring (1)
- Cerium oxide (1)
- Certification (1)
- Certified reference nanomaterials (1)
- Charge (1)
- Chemistry (1)
- Classification (1)
- Coating (1)
- Complementary methodology and metrology (1)
- Complex-shape (1)
- Composites (1)
- Controlled morphology (1)
- Controlled periodic illumination (1)
- Core–shell particles (1)
- Correlative analysis (1)
- Cross-sectioning (1)
- Crosslinking density (1)
- Crystallinity (1)
- Cyclic voltammetry (1)
- Cycloaliphatic epoxy oligosiloxane (1)
- Cyclometalated iridium (III) complexes (1)
- DSSC (1)
- Data correlation (1)
- Data readiness level (1)
- Decision support (1)
- Definition (1)
- Depth profiling (1)
- Dodecanethiol (1)
- EDX (1)
- ESR (1)
- Electrocatalysis (1)
- Electrochemical catalysts (1)
- Electrochemistry (1)
- Electrolysis (1)
- Electron probe microanalysis (1)
- Electrospun nanocomposite fiber (1)
- Energy dispersive X-ray spectroscopy (1)
- Epoxy (1)
- Epoxy conversion degree (1)
- Epoxy nanocomposites (1)
- European Centre (1)
- FAIRification (1)
- FeNi (1)
- Fenton (1)
- Film thickness (1)
- Focused ion beam tomography (1)
- Functionalized graphene (1)
- Governance (1)
- Graphite furnace (1)
- HR-CS-MAS (1)
- Hard-energy X-ray photoelectron spectroscopy (1)
- High-resolution (1)
- Homogeneity (1)
- Hybrid metrology (1)
- Hybrid metrology measurement (1)
- Hydrogen evolution reaction (1)
- ISO (1)
- Identification (1)
- Image segmentation (1)
- Imaging surface chemical analysis (1)
- Immunoassay (1)
- In-situ SAXS/WAXS (1)
- Infrared nano AFM (1)
- Inter-laboratory comparison (1)
- Intermediate phases (1)
- Intermodulation (1)
- Intermodulation AFM (1)
- Interphase (1)
- Intrinsic OER activity (1)
- Iron oxide (1)
- K-rich Birnessite (K0.45MnO2) (1)
- Layer-by-layer deposition (1)
- Lifetime analysis (1)
- Ligand exchange (1)
- Line scan (1)
- Lubricated contact (1)
- Luminescent lifetime (1)
- Machine learning (1)
- Magic-sized cluster (1)
- Magnetische Nanopartikel (1)
- Magnetpartikel (1)
- Mapping (1)
- Mechanical properties (1)
- Mesoporosity (1)
- Mesoporous iridium oxide films (1)
- Method development (1)
- Mixed metal oxide (1)
- Nano-safety (1)
- Nanocomposite (1)
- Nanocomposites (1)
- Nanomaterial analysis (1)
- Nanomaterial categorisation (1)
- Nanomaterial definition (1)
- Nanomaterial legislation (1)
- Nanomaterial regulation (1)
- Nanomechanical charecteisation (1)
- Nanomechanical properties (1)
- Nanoparticle concentration (1)
- Nanopowder (1)
- Nanosafety (1)
- Nanoscale EDX analysis (1)
- Nanoscale T-SEM (1)
- Neural networks (1)
- Non-classical crystallization theory (1)
- Non-destructive ambient analysis (1)
- Ochratoxin A (1)
- One-pot synthesis (1)
- Optically active surfaces (1)
- Oxygen evolution reaction (1)
- Oxygen evolution reaction (OER) (1)
- Particle size and shape distribution (1)
- Perfluorooctanoic Acid (PFOA) (1)
- Phosphates (1)
- Photoelectrochemistry (1)
- Photoreforming (1)
- Physicochemical characterization (1)
- Polyethylene glycol (1)
- Porosimetry (1)
- Porosity (1)
- Pphosphates (1)
- Quality assurance (1)
- Quantum yield (1)
- Real-time infrared spectroscopy (1)
- Reference material (1)
- Reference materials (1)
- Regulation (1)
- Reproducibility (1)
- Risk asessment (1)
- Roughness (1)
- Ru dye sensitizer (1)
- SEM/EDS (1)
- STEM-in-SEM (1)
- Sabatier (1)
- Scanning probe microscopy (1)
- Secondary ion mass spectrometry (1)
- Semiconductor nanocrystals (1)
- SiGe (1)
- Singulettsauerstoff (1)
- Size distribution (1)
- Size measurement (1)
- Size measurements (1)
- Small-angle X-ray scattering (1)
- Solar concentrator (1)
- Solar energy (1)
- Sonochemical synthesis (1)
- Stability (1)
- Standard operation procedures (1)
- Standardisation (1)
- Strontium titanate (1)
- Struvite (1)
- Surface functionalization (1)
- Synthesis (1)
- T-SEM (1)
- TEM (1)
- TKD (1)
- TRL (1)
- Thermoplastics (1)
- Thermosets (1)
- Thin film metrology (1)
- Thin mesoporous films (1)
- Thiols (1)
- Threshold (1)
- TiO2 (1)
- TiO2 films (1)
- Traceable nanoparticle size measurements; (1)
- Transition metal (1)
- Transition metals (1)
- Transmission Kikuchi diffraction (1)
- Transmission electron microscopy (1)
- Trends (1)
- VAMAS (1)
- Volcano plot (1)
- Volume specific surface area (1)
- Wastewater (1)
- Wear particle analysis (1)
- X-ray Fluorescence (1)
- X-rays (1)
- XPS (1)
- Xerogel (1)
- Zinc oxide (1)
- Zirconium (1)
- ZnSe (1)
- analytical service (1)
- transmission mode (1)
Organisationseinheit der BAM
- 6 Materialchemie (47)
- 6.1 Oberflächen- und Dünnschichtanalyse (47)
- 1 Analytische Chemie; Referenzmaterialien (13)
- 1.2 Biophotonik (5)
- 6.6 Physik und chemische Analytik der Polymere (5)
- 1.8 Umweltanalytik (4)
- 6.3 Strukturanalytik (4)
- 5 Werkstofftechnik (3)
- P Präsident (3)
- P.0 Präsident und andere (3)
Paper des Monats
- ja (5)
The mechanism of action of zirconium permanent modifiers on graphite surfaces was investigated in order to understand its influence on the analytical signal in atomic and molecular absorption spectrometry (AAS/MAS). For this, the molecule formation of CaF was studied, which is used for the indirect analytical determination of fluorine in high-resolution continuum source graphite furnace molecular absorption spectrometry (HR-CS-GFMAS). The kinetics of this reaction was established by monitoring its molecular spectrum at different atomisation temperatures. An Arrhenius plot showed a pseudo-first order reaction with respect to fluorine (n = 1). An intermediate state was isolated, and its structure was elucidated by spectroscopic methods: scanning electron microscopy with energy dispersive X-ray spectroscopy (SEMEDX), X-ray photoelectron spectroscopy (XPS), X-ray absorption spectroscopy (XANES and EXAFS), and Raman microspectroscopy. We propose here a mechanism, where ZrO2 acts as a heterogeneous catalyst: after a pyrolytic step, an intermediate state of ZrO(OCaF) is activated, and at higher temperatures, CaF(g) is released from the zirconium-coated graphite surface. No evidence of the formation of zirconium carbide was found. Consequently, as the CaF formation is catalysed by a heterogeneous catalyst, surface modifications with ZrO2 nanoparticles and ZrO xerogels were investigated in order to increase the surface area. Their influence was evaluated in the molecule formation of CaF, CaCl, CaBr, and CaI. Graphite furnace modification with zirconium oxide nanoparticles proves to be the best choice for fluorine analysis with a signal enhancement of more than eleven times with respect a non-coated graphite furnace. However, the influence of zirconium modifications in the analytical signals of Cl, and I is lower than the F signals or even negative in case of the Br. Understanding zirconium modifiers as heterogeneous catalysts offers a new perspective to AAS and MAS, and reveals the potential of surface analytical methods for development of improved permanent modifiers and graphite furnace coatings.
Iron Oxide Nanocubes as a New Certified Reference Material for Nanoparticle Size Measurements
(2023)
The rational design and increasing industrial use of nanomaterials require a reliable characterization of their physicochemical key properties like size, size distribution, shape, and surface chemistry. This calls for nanoscale reference materials (nanoRMs) for the validation and standardization of commonly used characterization methods closely matching real-world nonspherical nano-objects. This encouraged us to develop a nonspherical nanoRM of very small size consisting of 8 nm iron oxide nanocubes (BAM-N012) to complement spherical gold, silica, and polymer nanoRMs. In the following, the development and production of this nanoRM are highlighted including the characterization by transmission electron microscopy (TEM) and small-angle X-ray scattering (SAXS) as complementary methods for size and shape parameters, homogeneity and stability studies, and calculation of a complete uncertainty budget of the size features. The determination of the nanocubes’ edge length by TEM and SAXS allows a method comparison. In addition, SAXS measurements can also provide the mean particle number density and the mass concentration. The certified size parameters, area equivalent circular diameter and square edge length, determined by TEM with a relative expanded uncertainty below 9%, are metrologically traceable to a natural constant for length, the very precisely known (111) lattice spacing of silicon. Cubic BAM-N012 qualifies as a certified nanoRM for estimating the precision and trueness, validation, and quality assurance of particle size and shape measurements with electron microscopy and SAXS as well as other sizing methods suitable for nanomaterials. The production of this new iron oxide nanocube RM presents an important achievement for the nanomaterial community, nanomaterial manufacturers, and regulators.
The new recommended definition of a nanomaterial, 2022/C 229/01, adopted by the European Commission in 2022, will have a considerable impact on European Union legislation addressing chemicals, and therefore tools to implement this new definition are urgently needed. The updated NanoDefiner framework and its e-tool implementation presented here are such instruments, which help stakeholders to find out in a straightforward way whether a material is a nanomaterial or not. They are two major outcomes of the NanoDefine project, which is explicitly referred to in the new definition. This work revisits the framework and e-tool, and elaborates necessary adjustments to make these outcomes applicable for the updated recommendation. A broad set of case studies on representative materials confirms the validity of these adjustments. To further foster the sustainability and applicability of the framework and e-tool, measures for the FAIRification of expert knowledge within the e-tool’s knowledge base are elaborated as well. The updated framework and e-tool are now ready to be used in line with the updated recommendation. The presented approach may serve as an example for reviewing existing guidance and tools developed for the previous definition 2011/696/EU, particularly those adopting NanoDefine project outcomes.
The reinforcing effect of boehmite nanoparticles (BNP) in epoxy resins for fiber composite lightweight construction is related to the formation of a soft but bound interphase between filler and polymer. The interphase is able to dissipate crack propagation energy and consequently increases the fracture toughness of the epoxy resin. Usually, the nanoparticles are dispersed in the resin and then mixed with the hardener to form an applicable mixture to impregnate the fibers. If one wishes to locally increase the fracture toughness at particularly stressed positions of the fiber-reinforced polymer composites (FRPC), this could be done by spraying nanoparticles from a suspension. However, this would entail high costs for removing the nanoparticles from the ambient air. We propose that a fiber fleece containing bound nanoparticles be inserted at exposed locations. For the present proof-of-concept study, an electrospun polycarbonate nonwoven and taurine modified BNP are proposed. After fabrication of suitable PC/EP/BNP composites, the thermomechanical properties were tested by dynamic mechanical analysis (DMA). Comparatively, the local nanomechanical properties such as stiffness and elastic modulus were determined by atomic force microscopy (AFM). An additional investigation of the distribution of the nanoparticles in the epoxy matrix, which is a prerequisite for an effective nanocomposite, is carried out by scanning electron microscopy in transmission mode (TSEM). From the results it can be concluded that the concept of carrier fibers for nanoparticles is viable.
Thermoplastic modified thermosets are of great interest especially due to their improved fracture toughness. Comparable enhancements have been achieved by adding different nanofillers including inorganic particles such as nanosized boehmite. Here, we present a nanomechanical study of two composite systems, the first comprising a polycarbonate (PC) layer in contact with epoxy resin (EP) and the second consisting of a PC layer containing boehmite nanoparticles (BNP) which is also in contact with an EP layer. The interaction between PC and EP monomer is tested by in situ Fourier transformed infrared (FT-IR) analysis, from which a reaction induced phase separation of the PC phase is inferred. Both systems are explored by atomic force microscopy (AFM) force spectroscopy. AFM force-distance curves (FDC) show no alteration of the mechanical properties of EP at the interface to PC. However, when a PC phase loaded with BNP is put in contact with an epoxy system during curing, a considerable mechanical improvement exceeding the rule of mixture was detected.
The trend of BNP to agglomerate preferentially around EP dominated regions and the stiffening effect of BNP on EP shown by spatial resolved measurements of Young's modulus, suggest the effective presence of BNP within the EP phase.
Since its isolation, graphene has received growing attention from academia and industry due to its unique properties. However, the “what is my material” barrier hinders further commercialization. X-ray photoelectron spectroscopy (XPS) is considered as a method of choice for the determination of the elemental and chemical composition. In this work the influence of the morphology of graphene particles on the XPS results is studied and investigated as a function of X-ray energy, using conventional XPS with Al K𝜶 radiation and hard X-ray photoemission spectroscopy (HAXPES) using Cr K𝜶 radiation. Thereby, the information depth is varied between 10 and 30 nm. For this purpose, two commercial powders containing graphene nanoplatelets with lateral dimensions of either ≈100 nm or in the micrometer range are compared. These larger ones exist as stack of graphene layers which is inspected with scanning electron microscopy. Both kinds of particles are then functionalized with either oxygen or fluorine. The size of the graphene particles is found to influence the degree of functionalization. Only the combination of XPS and HAXPES allows to detect the functionalization at the outermost surface of the particles or even of the stacks and to provide new insights into the functionalization process.
This chapter provides an overview of what standards are, why they are important, and how they are developed. There is a focus on the work of standards committees relevant to nanotechnology measurement and characterization with tables detailing the standards that are currently available for a large number of different techniques, materials, and applications at the nanoscale.
In this paper, the accurate determination of the size and size distribution of bipyramidal anatase nanoparticles (NPs) after deposition as single particles on a silicon substrate by correlative Scanning Electron Microscopy (SEM) with Atomic Force Microscopy (AFM) analysis is described as a new measurement procedure for metrological purposes. The knowledge of the exact orientation of the NPs is a crucial step in extracting the real 3D dimensions of the particles. Two approaches are proposed to determine the geometrical orientation of individual nano‐bipyramides: (i) AFM profiling along the long bipyramid axis and (ii) stage tilting followed by SEM imaging. Furthermore, a recently developed method, Transmission Kikuchi Diffraction (TKD), which needs preparation of the crystalline NPs on electron‐transparent substrates such as TEM grids, has been tested with respect to its capability of identifying the geometrical orientation of the individual NPs. With the NPs prepared homogeneously on a TEM grid, the transmission mode in a SEM, i.e., STEM‐in‐SEM (or T‐SEM), can be also applied to extract accurate projection dimensions of the nanoparticles from the same sample area as that analysed by SEM, TKD and possibly AFM. Finally, Small Angle X‐ray Scattering (SAXS) can be used as an ensemble technique able to measure the NPs in liquid suspension and, with ab‐initio knowledge of the NP shape from the descriptive imaging techniques, to provide traceable NP size distribution and particle concentration.
Luminescent solar concentrators (LSC) allow to obtain renewable energy from building integrated photovoltaic systems. As promising efficient and long-term stable LSC fluorophores semiconductor nanocrystals like Quantum dots (QDs) with size and composition tunable optoelectronic properties have recently emerged. The most popular II/VI or IV/VI semiconductor QDs contain, however, potentially hazardous cadmium or lead ions, which is a bottleneck for commercial applications. A simple aqueous based, microwaveassisted synthesis for environmentally friendly and highly emissive AgInS2/ ZnS QDs is developed using 3-mercaptopropionic acid (MPA) and glutathione (GSH) and their incorporation into polylaurylmethacrylate (PLMA) polymer slabs integrable in LSC devices (10.4 × 10.4 × 0.2 cm3, G = 12.98).
With this simple approach, optical power efficiencies (OPE) of 3.8% and 3.6% and optical quantum efficiencies (OQE) of 24.1% and 27.4% are obtained, which are among the highest values yet reported.
The obvious benefits derived from the increasing use of engineered nano-, new, and advanced materials and associated products have to be weighed out by a governance process against their possible risks. Differences in risk perception (beliefs about potential harm) among stakeholders, in particular nonscientists, and low transparency of the underlying decision processes can lead to a lack of support and acceptance of nano-, new, and other advanced material enabled products. To integrate scientific outcomes with stakeholders needs, this work develops a new approach comprising a nine-level, stepwise categorization and guidance system entitled “Knowledge, Information, and Data Readiness Levels” (KaRLs), analogous to the NASA Technology Readiness Levels. The KaRL system assesses the type, extent, and usability of the available data, information, and knowledge and integrates the participation of relevant and interested stakeholders in a cocreation/codesign process to improve current risk assessment, communication, and governance. The novelty of the new system is to communicate and share all available and relevant elements on material related risks in a user/stakeholder-friendly, transparent, flexible, and holistic way and so stimulate reflection, awareness, communication, and a deeper understanding that ultimately enables the discursive process that is needed for the sustainable risk governance of new materials.