Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Dokumenttyp
Sprache
- Englisch (168)
- Deutsch (11)
- Mehrsprachig (1)
Referierte Publikation
- nein (180) (entfernen)
Schlagworte
- Mechanochemistry (49)
- In situ (20)
- Nanoparticles (11)
- Calcium sulfate (9)
- Heterogeneous catalysis (8)
- C-F bond activation (7)
- Catalysis (7)
- MOFs (7)
- Phosphates (7)
- Polymorphism (7)
- Amorphous phases (6)
- Flexible crystals (6)
- In situ real-time monitoring (6)
- Struvite (6)
- Anhydrite (5)
- MALDI-TOF MS (5)
- Scattering (5)
- Synchrotron (5)
- Waveguide (5)
- Biobased polymers (4)
- Cocrystal (4)
- Crystallization (4)
- MOF (4)
- Mesoporosity (4)
- NTE (4)
- Oxygen Reduction Reaction (4)
- PGM-free catalyst (4)
- Polylactide (4)
- Reactive extrusion (4)
- SAXS/WAXS (4)
- Synthesis (4)
- Transition metal (4)
- Transition metals (4)
- XANES (4)
- XAS (4)
- XRD (4)
- ZCF (4)
- Ab-initio (3)
- Absorption edge tomography (3)
- Boehmite (3)
- Copolymer (3)
- Corrosion (3)
- Crystal Engineering (3)
- Cycloalyphatic epoxy oligosiloxane (3)
- Diffraction (3)
- EXAFS (3)
- Gypsum (3)
- High entropy alloys (3)
- High-entropy alloys (3)
- LC-MS (3)
- MALDI TOF MS (3)
- Mesocrystals (3)
- Metal phosphonates (3)
- Microstructure (3)
- Nanocomposite (3)
- PXRD (3)
- Polymorph (3)
- SAXS (3)
- Sol-gel (3)
- Solid-state (3)
- TDEP (3)
- Thermography (3)
- Time resolved (3)
- ZrF4 (3)
- Acoustic levitation (2)
- Affinity chromatography (2)
- Aktivkohle (2)
- Antibodies (2)
- Automated synthesis (2)
- BAMline (2)
- Bassanite (2)
- Cocrystals (2)
- Coordination polymers (2)
- Crystal (2)
- EU FP7 project NanoValid (2)
- GEXRF (2)
- Glutaraldehyde (2)
- Grazing exit (2)
- Green chemistry (2)
- High Pressure (2)
- In situ Raman (2)
- Inter-laboratory comparison (2)
- Iron oxide nanoparticles (2)
- Kinetic (2)
- Large-scale production (2)
- Lignin (2)
- Liquid chromatography (2)
- Mass spectrometry (2)
- Mass spectrometry of polymers (2)
- Mesocrystal (2)
- Metal organic framework (2)
- Mixed gas atmosphere (2)
- Non-classical crystallization theory (2)
- Particle size (2)
- Photocuring (2)
- Polycondensation (2)
- Polyglycerol (2)
- Proximatanalyse (2)
- Reductive amination (2)
- Reference material (2)
- Rietveld (2)
- Ring-opening polymerization (2)
- SEC (2)
- Scanning electron microscopy (2)
- Silica nanoparticles (2)
- SnO2 (2)
- Synchrotron studies (2)
- Synchrotron tomography (2)
- TEM (2)
- TRIS (2)
- Technical lignin (2)
- Thermogravimetrie (2)
- Zeolitic imidazolate framework (2)
- Zersetzungsgasanalyse (2)
- 1,2,3-triazole (1)
- 2D chromatography (1)
- 5-hydroxynicotinic acid (1)
- Absorption edge (1)
- Additive Manufacturing (1)
- Additive manufacturing (1)
- Admixtures (1)
- Affinity extraction (1)
- Affinity support (1)
- Aging (1)
- Alkaline earth metal (1)
- Alpha-tricalcium phosphate (1)
- Aluminum oxide (1)
- Amino acid analysis (1)
- Amorphous calcium sulfate (1)
- Amphiphilicity (1)
- Analytical techniques (1)
- Antibody purification (1)
- Aromatic amino acid analysis AAAA (1)
- Aromatic amino acid analysis aaaa (1)
- BSA (1)
- Beamline (1)
- Berliner Tuffsteinfassaden (1)
- Betondickglasfenster des Glockenturms am Eiermannbau (1)
- Binder Jetting (1)
- Bioabbaubare Polymere (1)
- Biobased (1)
- Biocomposite (1)
- Bioconjugation (1)
- Biodegradable polymers (1)
- Bioseparation (1)
- Bovine serum albumin (1)
- C-C coupling (1)
- Carrier (1)
- Catalyst (1)
- Cement (1)
- Chemically complex alloys (1)
- Chromatography (HIC) (1)
- Classification (1)
- Clean energy technology (1)
- Coating (1)
- Composites (1)
- Computational chemistry (1)
- Core-shell (1)
- CrMnFeCoNi (1)
- Crosslinking (1)
- Croyo-starage (1)
- Crystal Engeneering (1)
- Crystalinity (1)
- Crystallinity (1)
- Cycles (1)
- DFT (1)
- DSC (1)
- Density Functional Theory (1)
- Density-functional theory (1)
- Depollution (1)
- Digitization (1)
- Dipsersive XAS (1)
- Direct fluorine-metal bond (1)
- Dispersive XAS (1)
- Downstream processing (1)
- ESEM (1)
- Electrochemistry (1)
- Electrode materials (1)
- Electron microscopy (1)
- Energetic materials (1)
- Energy (1)
- Energy input (1)
- Energy production (1)
- Energy storage (1)
- Energy systems (1)
- Ettringen tuff (1)
- FT-IR (1)
- Fluorescence (1)
- Fluoride (1)
- Fluorides (1)
- Fluorinated MOFs (1)
- Fluorine Interaction (1)
- Functional materials (1)
- Functionality type distribution (1)
- Gas flow assisted powder deposition (1)
- Gold mit Synchrotronstrahlung (1)
- Grafting (1)
- Graphene related 2D materials (1)
- Green Chemistry (1)
- HF (1)
- HF-shuttle (1)
- Hard-energy X-ray photoelectron spectroscopy (1)
- Hexafluorobenzen (1)
- High temperature corrosion (1)
- High-pressure volumetric analyzer (HPVA) (1)
- Holzschutzmittel (1)
- Human plasma (1)
- Hydrogen Fuelling Stations (1)
- Hydrogen Storage (1)
- Hydrophobic interaction (1)
- Hyperbranched polymer (1)
- ICP-OES (1)
- Igg (1)
- Immunoglobulins (1)
- Immunoprecipitation (1)
- In Situ (1)
- In situ PXRD (1)
- In situ XRD (1)
- In-Situ Characterization (1)
- Inter-laborator comparison (1)
- Iron oxide (1)
- K-nearest neighbor (1)
- Kaiser-Wilhelm-Gedächtniskirche (1)
- Kandelaber des Ensembles am Charlottenburger Tor (1)
- Keggin Cluster (1)
- Kinetics (1)
- Knoevenagel (1)
- Knoevenagel condensation (1)
- Künstliche Intelligenz (1)
- LC / MALDI-TOF-MS coupling (1)
- LC x ESI-TOF-MS (1)
- LCCC (1)
- Lanthanide (1)
- Large-scale processing (1)
- Large-scale synthesis (1)
- Levitation (1)
- Lifetime (1)
- Lignosulfonate (1)
- Linker (1)
- MALDI (1)
- MALDI-TOF mass spectrometry (1)
- MOUSE (1)
- Material characterization (1)
- Mechanism (1)
- Mechanochemical oxidation (1)
- Mechanochemical syntheses (1)
- Mechanochemictry (1)
- Mechanochemie (1)
- Mesoporous (1)
- Metal organic frameworks (1)
- Metal-organic frameworks (MOFs) (1)
- Metal-organic-frameworks (1)
- Metal–organic frameworks (1)
- Method (1)
- Milling (1)
- Modification (1)
- Molar mass distribution (1)
- Molecular Conformation (1)
- Molecular masses (1)
- N-Chlorination (1)
- Nano (1)
- NanoValid (1)
- Nanoparticle size measurement (1)
- Nanoparticular TiO2 (Anatase) (1)
- Nanoplattform (1)
- Nanostructure (1)
- Nanostructure quantification (1)
- Non-classical crystallization (1)
- Normung (1)
- Nucleation (1)
- OER (1)
- Organic-inorganic adsorbents (1)
- Oxygen reduction reaction (1)
- PCA (1)
- Pair Distribution Functions (1)
- Particle (1)
- Pergamonmuseums (1)
- Periodate oxidation (1)
- Pharmaceuticals (1)
- Phenolic compounds (1)
- Phosphate (1)
- Phosphonates (1)
- Phosphonic acids (1)
- Poly(ether-sulfone) (1)
- Poly(lactides) (1)
- Polyglycolide (1)
- Polylaktid (1)
- Polylaktide (1)
- Polymers (1)
- Polymorphs (1)
- Polymorphy (1)
- Polyurethane (1)
- Pore structure (1)
- Postfluorination (1)
- Powder X-ray diffraction (1)
- Protein (1)
- Protein a (1)
- Protein hydrolysis (1)
- Protein immobilization (1)
- Protein quantification (1)
- Proton conducting materials (1)
- Proton conductivity (1)
- Proton cunductor (1)
- Proton exchange membrane fuel cells (1)
- Purification (1)
- Quality assurance (1)
- Quantification (1)
- Radiografische Untersuchung (1)
- Reconstructed ion chromatograms (1)
- Recycling (1)
- Renewable copolymers (1)
- Reversible Hydrogen Storage (1)
- Reversible adsorption. (1)
- Ring-expansion polymerization (1)
- Roadmap (1)
- Round Robin (1)
- SDS-PAGE (1)
- Sall-angle scattering (1)
- Sapphire (1)
- Scaffold (1)
- Schriftrollen vom Toten Meer (1)
- Self-assembled monolayer (SAM) (1)
- Semi-Interpenetrating Network (1)
- Short chained Phthalates (1)
- Short chained phthalates (1)
- Silver (1)
- Simvastatin (1)
- Single crystal (1)
- Single-source precursors (1)
- Size distribution (1)
- Size-exclusion chromatography (SEC) (1)
- Small angle x-ray scattering (1)
- Solid phase (1)
- Specific Surface Area (BET) (1)
- Stability (1)
- Stuccos (1)
- Sulfates (1)
- Sulfidation (1)
- Surface charge (1)
- Surface chemistry (1)
- Sustainability (1)
- Synchrotron CT (1)
- Synchrotron radiation (1)
- TGA (1)
- Technical Lignin (1)
- Temperature (1)
- Termites (1)
- Thermal degradation (1)
- Time-resolved (1)
- Tin acetates (1)
- Tomography (1)
- Total scattering analysis (1)
- Transesterification (1)
- Transmission electron microscopy (1)
- Two-dimensional chromatography (2D-LC) (1)
- Two-dimensional liquid chromatography (2D-LC) (1)
- Tyrosine (1)
- UV degradation (1)
- UV-curing (1)
- Uncertainty budget (1)
- Upconversion (1)
- WAXS (1)
- Weathering (1)
- Weibern tuff (1)
- X-ray and electron diffraction (1)
- X-ray diffraction (1)
- X-ray photoelectron spectroscopy (1)
- X-ray scattering (1)
- X-ray spectroscopy (1)
- XPS (1)
- Zeta potential (1)
- Zirconium (1)
- Zyklen (1)
- corrosion (1)
- high entropy alloys (1)
- oxidation (1)
- scanning electron microscopy (1)
- sulfidation (1)
Organisationseinheit der BAM
- 6.3 Strukturanalytik (180) (entfernen)
MALDI TOF Massenspektrometrie wurde verwendet, um Kristallisationsprozesse in Polyestern (Polylactide, Polyglycolide) zu untersuchen. Dabei konnte gezeigt werden, dass Zyklen und Linearen simultan, aber in unterschiedlichen Kristalliten, kristallisieren. Die dabei ablaufenden Umesterungen (Transesterifizierungen) konnten mit der MALDI TOF Massenspektrometrie nachgewiesen werden. Damit wurde ein völlig neues Anwendungsgebiet dieser MS Methode demonstriert.
Owing to a growing shortage of fluorspar, a raw material used for producing fluorinated base chemicals, fluorspar has been named among the 30 critical raw materials in the EU. 1 However, the sustainable transfer of fluorine atoms from one molecule to another using heterogeneous catalysts has not yet been reported. Herein, we present the heterogeneous catalyst zirconium chloro fluoride (ZCF) that performs dehydrofluorination of a fluoroalkane and consecutive hydrofluorination of an alkyne at room temperature.
The variability and heterogeneity in their structural composition is significant for nearly all synthetic and natural polymers. Beside molar mass also functionality type distribution, copolymer composition distribution and architectural features are responsible for changing the material properties.
A wide range of analytical techniques are available to get insight into these parameters. However, in most cases it is essential to combine different sophisticated techniques to get closer to actual structures and to avoid statistical averages.
Different liquid chromatographic separation modes and their coupling in a two-dimensional way (SEC, LCCC, HILIC, 2D-LC) in combination with suitable detection techniques (e.g. UV, RI, LS, IR, MALDI/ESI-MS) as well as techniques like BET, DCS, SEM/TEM were applied to make structural features visible.
A few aspects are discussed for structural different polylactides from various synthesis routes and their behavior in LC-MS.
Glycolide was polymerized in bulk by means of four different ROPPOC catalysts: tin(II) 2-ethylhexanoate (SnOct2), dibutyltin bis(pentafluoro-phenoxide) (BuSnOPF),zinc biscaproate (ZnCap), and zinc bis(pentafluoro-phenyl sulfide) (ZnSPF). The temperature was varied between 110 and 180°C and the time between 3 h and 7 days. For the few polyglycolides (PGAs) that were soluble extremely high molecular masses were obtained. The MALDI TOF mass spectra had all a low signal-to-noise ration and displayed the peaks of cyclic PGAs with a“saw-tooth pattern ”indicating formation of extended-ring crystallites in the mass range below m/z 2500. The shape of DSC curves varied considerably with catalyst and reaction conditions, whereas the long-distance values measured by SAXS were small and varied little with the polymeriza-tion conditions.
Kemnitz et al. developed a fluorolytic route to access metal fluorides 2 such as AlF3 3 and MgF2 4 which possess a high surface area. In aluminium-based systems, the synthetic approach led to amorphous xerogels that can be further converted into Lewis superacids.3 Still, despite zirconium oxide being described as a stronger Lewis acid than other metal oxides 4 zirconium fluoride-based materials have only recently been reported or investigated. 6 In this work we extend the class of amorphous Lewis acidic heterogeneous catalysts to an amorphous ZrF4 that is active in C-F bond activation.
Amorphous materials play an important role in C-F bond activation but face the difficulty of limited available structural information by methods such as powder XRD and solid-state MAS NMR spectroscopy especially if the nucleus is not abundant enough. Here, we present heterogeneous catalysts, active in C-F bond activation, where EXAFS allowed specifically elucidating the local structure, which would have not been possible elsewise.
AbstractThe high-temperature corrosion behaviors of the equimolar CrCoNi medium-entropy alloy and CrMnFeCoNi high-entropy alloy were studied in a gas atmosphere consisting of a volumetric mixture of 10% H2O, 2% O2, 0.5% SO2, and 87.5% Ar at 800 °C for up to 96 h. Both alloys were initially single-phase fcc with a mean grain size of ~ 50 μm and a homogeneous chemical composition. The oxide layer thickness of CrMnFeCoNi increased linearly with exposure time while it remained constant at ~ 1 μm for CrCoNi. A Cr2O3 layer and minor amounts of (Co,Ni)Cr2O4 developed on the latter while three oxide layers were detected on the former, i.e., a thin and continuous chromium rich oxide layer at the oxide/alloy interface, a dense (Mn,Cr)3O4 layer in the center and a thick and porous layer of Mn3O4 and MnSO4 at the gas/oxide interface. Additionally, a few metal sulfides were observed in the CrMnFeCoNi matrix. These results were found to be in reasonable agreement with thermodynamic calculations.
Calcium sulfate hemihydrate (CaSO4ᐧ0.5H2O), also known as bassanite, has been used as a precursor to produce gypsum (dihydrate, CaSO4ᐧ2H2O) for various construction and decorative purposes since prehistoric times. The main route to obtain hemihydrate is a thermal treatment of gypsum at temperatures typically between 150 °C and 200 °C to remove some of the structural water.
In this contribution, we introduce (Fig. 1) a more efficient and sustainable method (T < 100 °C) that enables the direct, rapid, and reversibly conversion of gypsum to bassanite using reusable high salinity aqueous solutions (brines with c[NaCl] > 4 M). The optimum conditions for the efficientproduction of bassanite in a short time (< 5 min) involve the use of brines with c(NaCl) > 4 M and maintaining a temperature, T > 80 °C. When the solution containing bassanite crystals is cooled down to around room temperature, eventually gypsum is formed. When the temperature is raised again to T > 80 °C, bassanite is rapidly re-precipitated. This contrasts with the typical behaviour of the bassanite phase in low salt environments.
Traditionally, hemihydrate is obtained through a solid state thermal treatment because bassanite is considered to be metastable with respect to gypsum and anhydrite in aqueous solutions, and therefore gypsum-to-bassanite conversion should not occur in water. Its very occurrence actually contradicts numerical thermodynamic predictions regarding solubility of calcium sulfate phases. By following the evolution of crystalline phases with in situ and time-resolved X-ray diffraction/scattering and Raman spectroscopy, we demonstrated that the phase stability in brines at elevated temperatures is inaccurately represented in the thermodynamic databases. Most notably for c(NaCl) > 4 M, and T > 80 °C gypsum becomes readily more soluble than bassanite, which induces the direct precipitation of the latter from gypsum. The fact that these transformations are controlled by the solution provides extensive opportunities for precise manipulation of crystal formation. Our experiments confirmed that bassanite remained the sole crystalline structure for many hours before reverting into gypsum. This property is extremely advantageous for practical processing and efficient crystal extraction in industrial scenarios.
Mechanochemistry has become a compelling method for producing (new) molecule s and mate-rials, but the inner workings of the milling jars remain a fascinating mystery. Advances in this field include tailor-made chemical systems and real-time revelations using techniques such as XRD and Raman spectroscopy.
This talk will discuss our recent progress in using X-ray diffraction and sophisticated spectros-copy to observe reactions in various material systems during ball milling and extrusion in real-time.
The complexity of mechanochemical reactions spans multiple scales and requires a holistic ap-proach. The categorisation of reactions by investigative methods precedes the exploration of real-time analysis that reveals macroscopic processes using synchrotron techniques.
During this exploration, one resounding realisation remains: We are on the threshold of under-standing. The complexity of mechanochemistry requires a collective effort, drawing on the ex-pertise of a diverse community. As we unravel the web of mechanochemical phenomena, we acknowledge the collaborative nature of this ongoing journey.