Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Dokumenttyp
- Zeitschriftenartikel (1)
- Dissertation (1)
Sprache
- Englisch (2)
Schlagworte
- Rheometry (2) (entfernen)
Organisationseinheit der BAM
This paper presents the results of an interlaboratory study of the rheological properties of cement paste and ultrasound gel as reference substance. The goal was to quantify the comparability and reproducibility of measurements of the Bingham parameters yield stress and plastic viscosity when measured on one specific paste composition and one particular ultrasound gel in different laboratories using different rheometers and measurement geometries.
The procedures for both in preparing the cement paste and carrying out the rheological measurements on cement paste and ultrasound gel were carefully defined for all of the study’s participants. Different conversion schemes for comparing the results obtained with the different measurement setups are presented here and critically discussed. The procedure proposed in this paper ensured a reasonable comparability of the results with a coefficient of variation for the yield stress of 27% and for the plastic viscosity of 24%, despite the individual measurement series’ having been performed in different labs with different rheometers and measurement geometries.
The objective of this work is to demonstrate the practical application and sensitivity of ultrasound as a high frequency Dynamic Mechanical Analysis DMA technique for the characterisation of polymers. Conventional DMA techniques are used to determine thermo mechanical behaviour of polymers by typically employing dynamic shear or tensile loading modes at defined frequencies between 0.1 and 50 Hz. Sound waves may also be employed for DMA applications and depending on type of wave propagated, shear G´, G´´ and longitudinal L´, L´´ storage or loss modulus and tan (δ) may be determined from the measured acoustic parameters sound velocity and amplitude. The primary advantage of ultrasound DMA is that due to the compact sensor size it can easily be integrated into most manufacturing processes. To demonstrate the sensitivity of ultrasound to variations in the viscoelastic properties of polymers, the acoustic properties of a cured epoxy with an observed glass transition temperature of 86 °C (tan(δ) peak, 1Hz) were monitored in a temperature range from 20 to 200 °C and compared to conventional DMA results. The influence of measurement frequency, dispersion, hysteresis, reflections at material boundaries, and changes in material density on the measured sound velocity and amplitude were taken into account. To support conclusions a wide range of experimental data was evaluated using sensors operating in the frequency ranges 400 to 800 kHz and 3 to 6 MHz. The ultrasound results are compared to the tensile moduli E´, E´´ and tan(δ) measured using a conventional DMA technique operating at 0.1 to 33 Hz. Using different evaluation strategies such as the Williams Landel Ferry WLF equation it was possible to study the sensitivity of wave propagation to variations in the viscoelastic behaviour of a polymer. Taking advantage of this background knowledge, further experimental results are presented with the aim of demonstrating the sensitivity of this technique for cure monitoring applications and to the material transformations: gelation and vitrification. For this purpose an epoxy resin was cured at a range of constant temperatures whereby the curing reaction and the corresponding change in viscoelastic properties were monitored. Analysis techniques employed included ultrasound at 3 to 6 MHz, Differential Scanning Calorimeter DSC and Rheometry at 1 Hz. All results were summarised and presented graphically. Additionally an Arrhenius relationship was employed enabling direct comparison of results obtained from analysis techniques based on different working principles. Using this information, it was possible to demonstrate the practical application and the sensitivity of this technique to even small changes in viscoelastic properties of polymers.