Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Dokumenttyp
- Vortrag (3)
- Dissertation (1)
- Sonstiges (1)
Referierte Publikation
- nein (5)
Schlagworte
- WIG-Schweißen (5) (entfernen)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (3)
Experimentelle Charakterisierung der WIG-Schweißeignung einer Hoch- und Mittelentropie-Legierung
(2021)
Hoch- und Mittelentropie-Legierungen (engl. High/Medium Entropy Alloys–HEA/MEA) sind relativ neue Werkstoffklassen. Im Gegensatz zu herkömmlichen Legierungen bestehen HEA aus fünf bzw. MEA aus drei oder vier Legierungselementen im äquiatomaren Gleichgewicht. Um diese als reale Bauteile in die Anwendung zu überführen, muss die Verarbeitbarkeit ausführlich erforscht werden. In dieser Präsentation werden dafür erste Ergebnisse der schweißtechnischen Verarbeitung mittels WIG-Schweißen dargestellt. Dazu wurden zunächst die Schweißparameter mit einer Referenzlegierung (Ni-Basislegierung: 2.4858) bestimmt und auf eine CoCrFeMnNi-HEA sowie eine CoCrNi-MEA übertragen.
Experimentelle Charakterisierung der WIG-Schweißeignung einer Hoch- und Mediumentropie-Legierung
(2021)
Equiatomic multi-element systems with defined entropy are a relatively new mate-rial concept for alloy production. These alloys consist of at least five elements in equiatomic distribution in the case of high entropy alloys (HEA) and three to four elements in equiatomic distribution in the case of medium entropy alloys (MEA). Previous studies on these alloys have focused primarily on their production, micro-structure and the resulting material properties. Meanwhile, the focus here is on the processing of the alloys and their influence on future applications. Up to now, there has been insufficient knowledge of the materials and processes involved in weld-ing.
In this work, therefore, the weldability of a CoCrFeMnNi-HEA and a CoCrNi-MEA by means of a TIG welding process was investigated as a basic system. To this end, the welding parameters were first determined on a reference alloy (Ni-based: 2.4858) and transferred to the welding of the CoCrFeMnNi-HEA and CoCrNi-MEA. Weldability was assessed by testing the absence of defects and microstructures obtained. The weld metal exhibited the dendritic microstructure typical of TIG, with microsegregations forming as interdendritic phases. Increased hardness was de-tected in the weld metal compared to the base metal. In the heat-affected zone, there was little grain growth and, in both alloys, the formation of hot cracks after welding. The cause of the cracks was to be found in the specimen preparation, which had an influence on the subsequent processing. After elimination of this in-fluence, no welding process-related imperfections were found in the CoCrFeMnNi-HEA and CoCrNi-MEA.
In summary, both materials show good fusion weldability by TIG welding. The re-sults of this work thus contribute to the understanding of the weldability of HEA and in particular for CoCrNi-MEA, which was considered in this depth for the first time.
Experimentelle Charakterisierung der WIG-Schweißeignung einer Hoch- und Mediumentropie-Legierung
(2021)
Equiatomic multi-element systems with defined entropy are a relatively new mate-rial concept for alloy production. These alloys consist of at least five elements in equiatomic distribution in the case of high entropy alloys (HEA) and three to four elements in equiatomic distribution in the case of medium entropy alloys (MEA). Previous studies on these alloys have focused primarily on their production, micro-structure and the resulting material properties. Meanwhile, the focus here is on the processing of the alloys and their influence on future applications. Up to now, there has been insufficient knowledge of the materials and processes involved in weld-ing.
In this work, therefore, the weldability of a CoCrFeMnNi-HEA and a CoCrNi-MEA by means of a TIG welding process was investigated as a basic system. To this end, the welding parameters were first determined on a reference alloy (Ni-based: 2.4858) and transferred to the welding of the CoCrFeMnNi-HEA and CoCrNi-MEA. Weldability was assessed by testing the absence of defects and microstructures obtained. The weld metal exhibited the dendritic microstructure typical of TIG, with microsegregations forming as interdendritic phases. Increased hardness was de-tected in the weld metal compared to the base metal. In the heat-affected zone, there was little grain growth and, in both alloys, the formation of hot cracks after welding. The cause of the cracks was to be found in the specimen preparation, which had an influence on the subsequent processing. After elimination of this in-fluence, no welding process-related imperfections were found in the CoCrFeMnNi-HEA and CoCrNi-MEA.
In summary, both materials show good fusion weldability by TIG welding. The re-sults of this work thus contribute to the understanding of the weldability of HEA and in particular for CoCrNi-MEA, which was considered in this depth for the first time.
Hochentropielegierungen sind eine neue Materialklasse. Um diese in die als reale Bauteile zu in die Anwendung zu überführen muss die Verarbeitbarkeit ausführlich erforscht werden. In dieser Präsentation werden dafür erste Ergebnisse der schweißtechnischen Verarbeitung mittels Rührreib- und WIG-Schweißen dargestellt.
Grain refinement is an important opportunity to improve mechanical properties of fusion welds and the weldability (cracking sensitivity) of the base metal. In this thesis, grain refinement was achieved for aluminium welds by additions of a grain refiner. For this purpose, inserts consisting of aluminium base metal and small additions of commercial Al Ti5B1 grain refiner were cast, deposited in base metal plates, and fused in a gas tungsten arc (GTA) welding process. As a result, higher grain refiner additions increased the weld’s titanium and boron content resulting in a significant decrease in the weld metal mean grain size up to 86%. This grain size reduction led to a transition from predominantly columnar to equiaxed grain shape (columnar to equiaxed transition CET). The grain refinement was thereby found to be strongly dependent upon the base metal chemical composition. Accordingly, the grain refining efficiency was the highest in commercial pure Al (Alloy 1050A, Al 99.5), followed by Alloy 6082 (Al Si1MgMn) and Alloy 5083 (Al Mg4.5Mn0.7). In this regard, the parameters P and Q were applied to investigate the influence of alloying elements on the supply of constitutional undercooling during solidification and on final grain size. Also, WDS (wavelength dispersive x-ray spectroscopy) and TEM (transmission electron microscopy) analysis found an increasing number of particles rich in Ti and B. These substrates are probably TiB2 particles coated by Al3Ti likely nucleating Al grains during solidification. The variation in torch speed showed that increasing torch speeds support the CET effect leading to many small and equiaxed grains at high torch speed. To give explanations for this observation, the thermal conditions, that are controlled by welding parameters such as torch speed, were determined with temperature measurements via thermocouples. These measurements revealed that solidification parameters like solidification growth rate, cooling rate, (local) thermal gradient and solidification time vary significantly along the solidification front (from weld centreline to weld fusion line). In a further step, the solidification parameters were related to the corresponding grain size and shape. On the basis of this comparison, an analytical approach was used to model the CET. This allowed the prediction of critical values for both solidification growth rate and thermal gradient, at which the CET occurs in aluminium weld metal. The influence of grain refinement on the weld mechanical properties was investigated in tensile tests. Accordingly, the ductility of Alloy 5083 welds was increased through grain refinement whereas no improvement in weld metal strength was observed. Furthermore, tear tests with notched specimens revealed for Alloy 1050A that the resistance against initiation and propagation of cracks in the weld metal can be enhanced through grain refinement. In addition, when welding Alloy 6082, weld metal grain refinement prevented the formation of centreline solidification cracking that was present only in welds with unrefined grain structure. On the basis of the above experiments, the Ti/B contents needed in commercial filler wires or rods to allow optimum weld metal grain refinement were estimated. Accordingly, this work gives specific recommendations to filler material producers through a simple calculation that considers the influence of base alloy and welding process. The results show that the Ti/B contents defined by the corresponding standards for filler alloys are too low to allow weld metal grain refinement.