Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Erscheinungsjahr
- 2019 (118) (entfernen)
Dokumenttyp
- Vortrag (52)
- Beitrag zu einem Tagungsband (30)
- Zeitschriftenartikel (25)
- Posterpräsentation (9)
- Forschungsbericht (2)
Schlagworte
- Additive manufacturing (12)
- Laser implantation (12)
- Additive Manufacturing (11)
- Laser beam welding (11)
- TiB2 (11)
- Thermography (10)
- Surface texturing (9)
- Additive Fertigung (8)
- AISI D2 (7)
- Laser Metal Deposition (7)
- Numerical simulation (7)
- Laserstrahlschweißen (6)
- Thermografie (6)
- 3D printing (5)
- Hybrid Laser Arc Welding (5)
- X38CrMoV5-3 (5)
- 3D Druck (4)
- Direct energy deposition (4)
- Duplex (4)
- Highspeed-plasma-laser-cladding (4)
- Keyhole mode welding (4)
- Low Cycle Fatigue (4)
- Mechanical properties (4)
- Open data (4)
- Open science (4)
- Solidification cracking (4)
- Ti-6Al-4V (4)
- Additive Manufacturing (AM) (3)
- Computed Tomography (3)
- Deposition welding (3)
- Digitalization (3)
- Electromagnetic Weld Pool Support (3)
- Element transport (3)
- End crater (3)
- Full Penetration (3)
- Heat conduction (3)
- High power laser beam welding (3)
- Hot-Stamping (3)
- Hybrid laser-arc welding (3)
- Inconel 718 (3)
- LPA (3)
- Laser Powder Bed Fusion (L-PBF) (3)
- Laser Pulver Auftragsschweißen (3)
- Laser metal deposition (3)
- Laserimplantation (3)
- Magnetohydrodynamics (3)
- Microstructure (3)
- Process monitoring (3)
- Research data management (3)
- Thick Materials (3)
- Weld pool shape (3)
- Welding (3)
- Advanced high strength steel (2)
- Aerosol measurements (2)
- Auftragschweißen (2)
- Boundary element method (2)
- Bulging effect (2)
- CT (2)
- Computed tomography (2)
- DED (2)
- Defokussierung (2)
- Direct Energy Deposition (2)
- Direct Laser Metal Deposition (2)
- Dual phase steel (2)
- End-crater (2)
- Endkrater (2)
- Fatigue (2)
- Fume (2)
- High Temperature Testing (2)
- Hot cracking (2)
- Keyhole mode laser beam welding (2)
- Korrosionsschutz (2)
- LCF (2)
- LMD (2)
- LME (2)
- Laser (2)
- Laser Beam Welding (2)
- Laser Powder Bed Fusion (2)
- Laser beam melting (2)
- Laser dispersing (2)
- Laserhybridschweißen (2)
- MHD (2)
- Mikrostruktur (2)
- Molten pool dynamics (2)
- NDT (2)
- NiCrBSi (2)
- Online Process Monitoring (2)
- Optical Tomography (2)
- Partial penetration (2)
- Particle gas emission (2)
- Pipeline steel X120 (2)
- Plasma (2)
- Plasma-Transferred-Arc (2)
- Plume (2)
- Porosity (2)
- Powder Bed Fusion (2)
- Presshärten (2)
- Process simulation (2)
- Prozesskette (2)
- Pufferschichten (2)
- RSW (2)
- Residual stress (2)
- Resistance spot welding (2)
- Rundnaht (2)
- Selected Laser Melting (2)
- Selective Laser Melting (2)
- Simulation (2)
- Solidification (2)
- Spatter (2)
- Stainless Steel (2)
- Superelliptic Lamé curves (2)
- Temperature field (2)
- Tensile Properties (2)
- Testing method (2)
- Ti64 (2)
- TiAl5V4 (2)
- Titan (2)
- Titanium (2)
- Tribologie (2)
- Tungsten carbide (2)
- Wear resistance (2)
- Weld pool behavior (2)
- Weld pool shape approximation (2)
- Zinc coated steel (2)
- Zugeigenschaften (2)
- Überlappbereich (2)
- AGIL (1)
- AM (1)
- Acoustic Emission (1)
- Advanced high strength steels (1)
- Aluminium-Druckguss (1)
- Artungleiche Werkstoffe (1)
- Auftriebskräfte (1)
- Bewegtes Gitter (1)
- Bulge (1)
- Bulging (1)
- Calculation time (1)
- Characterisation (1)
- Circumferential weld (1)
- Circumferential welds (1)
- Coarse-grained heat-affected zone (1)
- Computed tomography (CT) (1)
- Crack (1)
- Crack propagation (1)
- Cracking (1)
- Critical strain (1)
- Cryogenic Steel (1)
- Crystal Plasticity Modelling (1)
- DED-L (1)
- Data fusion (1)
- Digitalisierung (1)
- Directed Energy Deposition (1)
- Directed energy deposition (1)
- Dissimilar metal weld overlays (1)
- Distortion (1)
- Distortion simulation (1)
- Efficient modelling (1)
- Electro-thermomechnical model (1)
- Electrode geometry (1)
- Electromagnetic stirring (1)
- Electromagnetic weld pool support (1)
- Elektromagnetische Porenreduktion (1)
- Elektromagnetische Schmelzbadunterstützung (1)
- Elektromagnetsiche Schmelzbadbeeinflussung (1)
- Elemenet transport (1)
- Environment (1)
- Equivalent heat source (1)
- Fatigue tests (1)
- Fine-grained Steel (1)
- Finite element method (1)
- Forschungsdatenmanagement (1)
- Full penetration (1)
- Fusion zone (1)
- Fügetechnologie (1)
- Grain size (1)
- Grain structure (1)
- Heat saturation function (1)
- Heissrisse (1)
- High-power laser beam (1)
- Highspeed plasma (1)
- Hochleistungslaserstrahlschweißen (1)
- Hot crack (1)
- Hot stamping (1)
- Hybrid components (1)
- Hybrid laser arc welding (1)
- In situ Monitoring (1)
- In-situ Process Monitoring (1)
- Infrared Thermography (1)
- Infrared thermography (1)
- Knotenweise Zwangsbedingungen (1)
- Kurz- und Langriss-Ermüdungsbruchmechanik (1)
- L-PBF (1)
- Lack-of-fusion (1)
- Laser cladding (1)
- Laser hybrid welding (1)
- Laser surface texturing (1)
- Laser welding (1)
- Laser-Hybridschweißen (1)
- Laser-Pulver-Auftragschweißen (1)
- Laserdispergieren (1)
- Laserpulverauftragschweißen (1)
- Laserstrahlhybridschweißen (1)
- Liquid metal embrittlement (1)
- Local fatigue spproaches (1)
- Localized Laser Dispersing (1)
- Low Temperature Toughness (1)
- Low heat input GMA welding (1)
- Magnetic field (1)
- Mechanical Properties (1)
- Mechanical property (1)
- Melt pool behaviour (1)
- Melting (1)
- Microstructure characterisation (1)
- Mittelrippendefekt (1)
- Moving mesh (1)
- NbC (1)
- Neutron Diffraction (1)
- Neutron diffraction (1)
- Nickel alloys (1)
- Non-destructive Materials (1)
- Non-destructive testing (1)
- Numerical analysis (1)
- Numerical modelling (1)
- Numerische ISmulation (1)
- Numerische Simulation (1)
- Optical Emission Spectroscopy (1)
- Optical emission spectroscopy (1)
- Optical measurment technique (1)
- Optical tomography (1)
- Optische Tomografie (1)
- Oscillating magnetic field (1)
- Parabolic flight (1)
- Partial penetration laser hybrid welding (1)
- Path planning (1)
- Primär- und Sekundärspannungen (1)
- Process development (1)
- Prozessmonitoring (1)
- Prozesssimulation (1)
- Prozessüberwachung (1)
- Radiological inspections (1)
- Residual stresses (1)
- Rundnähte (1)
- SLM (1)
- Safety (1)
- Schweißeigenspannungen (1)
- Schweißeigenspannungs-Tiefen-Profile (1)
- Schweißen (1)
- Schweißen von kaltzähen Stählen (1)
- Schweißstruktursimulation (1)
- Selective Laser Melting (SLM) (1)
- SimCoLas (1)
- Stabilität von Eigenspannungen (1)
- Stahl und Aluminium (1)
- Standardisation (1)
- Steel (1)
- TaC (1)
- Tantalum carbide (1)
- Technical crack detection (1)
- Tensile testing (1)
- Themral cycles (1)
- Thermo-fluid dynamics (1)
- Thermo-fluid flow (1)
- Thermograhy (1)
- Thick materials (1)
- Thick-walled Structures (1)
- Thick-walled steel (1)
- Thick-walled steels (1)
- Tool steel (1)
- Toughness (1)
- Transient heat transfer (1)
- Tubular X-joints (1)
- Weld pool (1)
- Welding process simulation (1)
- X8Ni9 (1)
- deposition welding (1)
- digital image correlation (1)
- dual phase steel (1)
- highspeed plasma laser cladding (1)
- resistance spot welding (1)
- µ-gravity (1)
- Äquivalente Wärmequelle (1)
- кратер шва (1)
- кристаллизация, (1)
- плавление, (1)
- сварочная ванна (1)
- температурное поле (1)
- функция теплонасыщения (1)
Organisationseinheit der BAM
- 9.3 Schweißtechnische Fertigungsverfahren (118) (entfernen)
Eingeladener Vortrag
- nein (52)
High heat input leads to grain coarsening and softening in WM and HAZ; the tensile strength is reduced. Low heat input leads to inadmissible hardening in the WM; the impact strength is reduced.
The proposed t8/5-time of 3 s to 15 s could be achieved through the reduced welding velocity.
The concept of electromagnetic weld pool support system allowed single-pass welds in flat position without gravity drop-outs even for reduced welding speeds; in this way the heat input can be controlled.
The adaptation of the electromagnetic weld pool support system to laser and laser hybrid welding process can dramatically increase the potential field of application of these technologies for real industrial implementation.
Single-pass Hybrid Laser Arc Welding of Thick Materials Using Electromagnetic Weld Pool Support
(2019)
Hybrid laser-arc welding process allows single-pass welding of thick materials, provides good quality formation of joints with minimal thermal deformations and a high productivity in comparison with arc-based welding processes. Nevertheless, thick-walled steels with a thickness of 20 mm or more are still multi-pass welded using arc welding processes, due to increased process instability by increasing laser power. One limitation factor is the inadmissible formation of gravity drop-outs at the root. To prevent this, an innovative concept of electromagnetic weld pool support is used in this study. With help of such system a stable welding process can be established for 25 mm thick steel plates and beyond. Sound welds could be obtained which are tolerant to gaps and misalignment of the welded parts. The adaptation of this system to laser and hybrid laser-arc welding process can dramatically increase the potential field of application of these technologies for real industrial implementation.
The presented study deals with the performing and mechanical testing of single pass hybrid laser-arc welds (HLAW) on 25 mm thick plates made of steel grade S355J2. One of the challenges have to be solved at full penetration HLAW of thick plates is the drop formation occurring due to the disbalances of the forces acting in the keyhole and on the melt pool surface. Such irregularities mostly limit the use of high-power laser beam welding or HLAW of thick-walled constructions. To overcome this problem, an innovative concept of melt pool support based on generating Lorentz forces in the weld pool is used in this work. This method allows to perform high quality welds without sagging even for welding of 25 mm thick plates in flat position at a welding speed of 0.9 m min-1. For the obtain of full penetrated welds a laser beam power of 19 kW was needed. A high V-impact energy of up to 160 J could be achieved at the test temperature of 0 °C. Even at the most critical part in the weld root an impact energy of 60 J in average could be reached. The tensile strength of the weld reaches that of the base material. An introduce of the HLAW process with electromagnetic support of the melt pool in the industrial practice is an efficient alternative to the time- and cost-intensive arc-based multi-layer welding techniques which are established nowadays for joining of thick-walled constructions.
With global increases in clean energy demand, the natural gas is gaining in importance. Pipelines are the safest and most cost-effective way of transporting natural gas. Due to high transport volume and resulting high operation pressure, the demand for ultra-high strength steel grades such as X120 is very strong. As a result of the fact that these steels are produced by thermo-mechanical controlled processing, the welding process must be selected accordingly. Based on investigations, a high heat input such as by submerged arc welding process leads to softening in the weld metal and loss of strength whereas pure laser beam welding results in high cooling rates and deteriorate toughness of the weld metal. The objective of this research is to investigate the influence of heat input to mechanical properties of hybrid laser-arc welded pipeline steels of grade X120. Test specimens with a thickness of 20 mm could be welded without preheating in a single-pass with different welding velocities to observe the largest possible parameter window of the heat input. The achieved V-notch impact energy for hybrid laser-arc welded samples was 144±37 J at a testing temperature of -40 °C. With a tensile strength of 930±4 MPa the requirements of API 5L was achieved. To prevent gravity drop-outs at the slow welding speeds, an electromagnetic weld pool support system was used, which works contactless and is based on generating Lorentz forces. It was therefore possible to control the cooling rate in order to meet the requirements of the mechanical properties. By adapting the electromagnetic weld pool support to the laser and laser hybrid welding process, the application potential of these technologies for industrial implementation can be drastically increased.
Hybrid laser-arc welding offers many advantages, such as deep penetration, good gap bridge-ability, and low distortion due to reduced heat input. The filler wire which is supplied to the process is used to influence the microstructure and mechanical properties of the weld seam.
A typical problem in deep penetration high-power laser beam welding with filler wire and hybrid laser-arc welding is an insufficient mixing of filler material in the weld pool, leading to a non-uniform element distribution in the seam. In this study, oscillating magnetic fields were used to form a non-conservative component of the Lorentz force in the weld pool to improve the element Distribution over the entire thickness of the material. Full penetration hybrid laser-arc welds were performed on 20-mm-thick S355J2 steel plates with a nickel-based wire for different arrangements of the oscillating magnetic field. The Energy-dispersive X-ray spectroscopy (EDS) data for the distribution of two tracing elements (Ni and Cr) were used to analyze the homogeneity of dilution of the filler wire.
With a 30° turn of the magnetic field to the welding direction, a radical improvement in the filler material distribution was demonstrated. This would lead to an improvement of the mechanical properties with the use of a suitable filler wire.
As humanity contemplates manned missions to Mars, strategies need to be developed for the design and operation of hospitable environments to safely work in space for years. The supply of spare parts for repair and replacement of lost equipment will be one key need, but in-space manufacturing remains the only option for a timely supply. With high flexibility in design and the ability to manufacture ready-to-use components directly from a computeraided model, additive manufacturing (AM) technologies appear extremely attractive. For the manufacturing of metal parts, laser-beam melting is the most widely used AM process. However, the handling of metal powders in the absence of gravity is one prerequisite for its successful application in space. A gas flow throughout the powder bed is successfully applied to compensate for missing gravitational forces in microgravity experiments. This so-called gas-flow-assisted powder deposition is based on a porous Building platform acting as a filter for the fixation of metal particles in a gas flow driven by a pressure difference maintained by a vacuum pump.
Der Vortrag thematisiert die Behandlung von Schweißeigenspannungen bei der Auslegung geschweißter Bauteile. Ausgehend von Fragen der Klassifizierung unterschiedlicher Typen von Eigenspannungen wird auf Fragen der Behandlung von Primär- und Sekundärspannungen, der Ermittlung und Aussagefähigkeit von Eigenspannungs-Tiefen-Profilen und der Stabilität der Eigenspannungen bei zyklischer Beanspruchung eingegangen. Neben der Auslegung auf Bruch wird die Beschreibung der Ermüdungsrissausbreitung bei Vorhandensein von Eigenspannungen diskutiert, wobei neben der klassischen Langrissbruchmechanik auch Besonderheiten der Kurzrissbruchmechanik angesprochen werden.
The Influence of the Temperature Gradient on the Distribution of Residual Stresses in AM AISI 316L
(2019)
Steep temperature gradients and solidification shrinkage are the main contributors to the formation of residual stresses in additively manufactured metallic parts produced by laser beam melting. The aim of this work was to determine the influence of the temperature gradient.
Diffraction results show a similar pattern for both specimens, indicating the shrinkage to be more dominant for the distribution of residual stresses than the temperature gradient. Thermography results imply that a higher energy input result in higher compressive residual stresses in the bulk.
µCT is used to validate the capability of online monitoring for in-situ detection of defects during the L-PBF build process, which is a focus of the TF project ProMoAM.
Our first experiments show that online monitoring using thermography and optical tomography cameras are able to detect defects in the built part. But further research is needed to understand root cause of the correlation.
Rapid cooling rates and steep temperature gradients are characteristic of additively manufactured (AM) parts and important factors for residual stress formation which have implications on structural integrity. This study examined the influence of heat input on the distribution of residual stresses in two prisms produced by laser powder bed fusion (L-PBF) of austenitic stainless steel 316L.
The layers of the prisms were exposed using two distinct helix scanning strategies: one scanned from the centre to the perimeter and the other from the perimeter to the centre. Residual stresses were characterised at one plane perpendicular to the building direction at half of its build height using neutron diffraction. In addition, the defect distribution was analysed via micro X-ray computed tomography (µCT) in a twin specimen.
Both scanning strategies reveal residual stress distributions typical for AM: compressive stresses in the bulk and tensile stresses at the surface. However, temperature gradients and maximum stress levels differ due to the different heat input. Regarding the X-ray µCT results, they show an accumulation of defects at the corners where the laser direction turned through 90°.
The results demonstrate that neutron diffraction and X-ray µCT can be successfully used as non-destructive methods to analyse through-thickness residual stress and defect distribution in AM parts, and in the presented case, illustrate the influence of scanning strategies. This approach contributes to deeper assessment of structural integrity of AM materials and components.