Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Dokumenttyp
- Zeitschriftenartikel (43)
- Vortrag (38)
- Posterpräsentation (19)
- Beitrag zu einem Tagungsband (1)
- Sonstiges (1)
Schlagworte
- Glass (29)
- Crystallization (14)
- Crack growth (12)
- Sintering (11)
- DCB (9)
- Water speciation (9)
- Soda-lime silicate glass (7)
- Vickers (7)
- Water content (7)
- EBSD (5)
- Foaming (5)
- Bildanalyse (4)
- Bioactive glass (4)
- Internal friction (4)
- Ontologie (4)
- Orientation (4)
- Oxidglas (4)
- Corrosion (3)
- Crystal orientation (3)
- Digitaler Zwilling (3)
- Diopside (3)
- Fracture Toughness (3)
- Glas (3)
- Glass ceramic (3)
- Glass powder (3)
- ML (3)
- NMR spectroscopy (3)
- Oxide Glasses (3)
- Silicate Glasses (3)
- Surface crystallization (3)
- Surface energy (3)
- Vickers indentation (3)
- Wasser (3)
- Al2O3 (2)
- Alkali zinc borate glasses (2)
- Bioactive Glass (2)
- Bond energy (2)
- Coating (2)
- Diffusion coefficient (2)
- Diopsid (2)
- Elastic constants (2)
- Fracture surface energy (2)
- Geothermal (2)
- GlasDigital (2)
- Glass composition (2)
- Glass transition (2)
- Glass-ceramic (2)
- IR (2)
- Infrared spectroscopy (2)
- Lead borate glasses (2)
- Martensitic steel (2)
- Material Digital (2)
- Mechanical properties (2)
- Microhardness (2)
- Powder (2)
- Relaxation (2)
- Risswachstum (2)
- Robotische Glasschmelzanlage (2)
- Soda-lime-silica glass (2)
- Sol-gel coating (2)
- Stress intensity factor (2)
- Superconducting magnet (2)
- Surface (2)
- Surface Energy (2)
- Viscosity (2)
- robotische Glasschmelzanlage (2)
- 3D REM (1)
- 3D etching (1)
- 3D glass structure model (1)
- 3D printing (1)
- Acid-leaching (1)
- Alkali aluminosilicate glasses (1)
- Alkali and alkaline earth silicate and borate glass (1)
- Aluminosilicate glasses (1)
- Analytical scanning electron microscopy (1)
- Artificial weathering (1)
- Atomic packing factor (1)
- Automated analysis (1)
- BCS (1)
- BTS (1)
- Behmite (1)
- Blähen (1)
- Borosilicate glass (1)
- Brittle fracture (1)
- Bruchflächen (1)
- Bubble formation (1)
- Calculated intrinsic fracture toughness (1)
- Ceramic multilayers (1)
- Co-firings (1)
- Coefficient of thermal expansion (1)
- Crack growth in air (1)
- Crack healing (1)
- Crosslinking (1)
- Crystal growth (1)
- Crystal growth velocity (1)
- Crystal lattice (1)
- Crystal morphology (1)
- Cytocompatibility (1)
- DCB geometry (1)
- Data space (1)
- Degradation (1)
- Density (1)
- Differential scanning calorimetry (1)
- Diffusion (1)
- Digitalisierung (1)
- Dissolved water (1)
- Dynamic mechanical analysis (1)
- Dynamisch Mechanische Analyse (1)
- Exposed metal sites (1)
- Facilitated activation (1)
- Ferrous phosphate hydrate (1)
- Formerkennung (1)
- Fracture Mechanics (1)
- Fracture surface (1)
- Fracture toughness (1)
- Fragility (1)
- Fraktographie (1)
- Fresnoit (1)
- Fresnoite (1)
- Gasabgabe (1)
- Gasgehalt (1)
- General Chemistry (1)
- Glass Ceramic (1)
- Glass crystallization stress (1)
- Glass melting (1)
- Glass screening device (1)
- Glass transformation temperature (1)
- Glass-ceramics definition (1)
- Growth kinetics (1)
- Growth rate (1)
- High pressure (1)
- High temperature (1)
- High-temperature oxidation (1)
- Hochtemperatur (1)
- Hydrogen diffusivity (1)
- Hydrogen permeability (1)
- Hydrogen permeation (1)
- Hydrous glass (1)
- IR spectroscopy (1)
- Inconel 625 (1)
- Indentation fracture toughness (1)
- Internal stresses (1)
- Ion beam erosion Sectioning (1)
- Ionic porosity (1)
- JMAK model (1)
- Kristallisation (1)
- Low expansion (1)
- MOF-74 (1)
- Martensitic steels (1)
- Materials Chemistry (1)
- Mechanical Engineering (1)
- Mechanics of Materials (1)
- Metals and Alloys (1)
- Microstructure (1)
- Milling (1)
- Mixed-linkers (1)
- Modeling (1)
- Moisture (1)
- NMR (1)
- Nb3Sn (1)
- Non-desired foaming (1)
- Nucleation (1)
- Nucleation mode (1)
- Nucleation tendency (1)
- Nydrogen melting (1)
- Ontology (1)
- Oriented surface crystallization (1)
- Oxidation protection (1)
- Oxide glass (1)
- Peem (1)
- Phase Separation (1)
- Phase transformations (1)
- Phosphate (1)
- Physical properties (1)
- Polymer (1)
- Polyurethane (1)
- Property simulation (1)
- Protective coating (1)
- Raman spectroscopy (1)
- Relaxationsphänomene (1)
- Resonance testing (1)
- Robot-assisted galss melting (1)
- Roboter (1)
- SEM (1)
- Sample preparation (1)
- Scaffolds (1)
- Shear thinning (1)
- Silicate glass (1)
- Silicatglas (1)
- Silicoborate glasses (1)
- Simulation (1)
- Sinter retardation (1)
- Sintern (1)
- Sinterung (1)
- Slow crack growth (1)
- Soda lime silicate glass (1)
- Soda-lime-silica (1)
- Sodium ion batteries (1)
- Sodiumborosilicate glasses (1)
- Solubility (1)
- Stable crack growth (1)
- Stress intensity (1)
- Stress-corrosion (1)
- Stress-strain behavior (1)
- Stress-strain-behavior (1)
- Structural defects (1)
- Struktur (1)
- Subcritical crack growth (1)
- Supersaturation (1)
- Surface Nucleation (1)
- Surface nucleation (1)
- Surface roughness (1)
- Synchrotron (1)
- Synchrotron micro-tomography (1)
- Thermal expansion (1)
- Thermo-optical measurement (1)
- Thermoanalytical Methods (1)
- Toughness (1)
- Vacuum hot extraction (1)
- Viscous sintering (1)
- Vivianite (1)
- Volume changes (1)
- Water (1)
- Water in glass (1)
- X-ray diffraction (1)
- XRM (1)
- Young`s modulus (1)
- Young´s modulus (1)
- Young’s Modulus (1)
- high pressure (1)
- infrared spectroscopy (1)
- phosphate glasses (1)
- water speciation (1)
Organisationseinheit der BAM
- 5.6 Glas (102) (entfernen)
Eingeladener Vortrag
- nein (38)
The knowledge of the temperature-induced changes of the superconductor volume and of the thermomechanical behavior of the different coil and tooling materials is required for predicting the coil geometry and the stress distribution in the coil after the Nb3Sn reaction heat treatment. In this paper, we have measured the Young’s and shear moduli of the HL-LHC 11 T Nb3Sn dipole magnet coil and reaction tool constituents during in situ heat cycles with the dynamic resonance method. The thermal expansion behaviors of the coil components and of a free standing Nb3Sn wire were compared based on dilation experiments.
A glass of the composition 37BaO·16CaO·47SiO2 wt% produced on an industrial scale is crystallized at 970 °C for times ranging from 15 min to 2 h. The crystallization at the immediate surface as well as the crystal growth into the bulk are analyzed using scanning electron microscopy (SEM) including energy dispersive X-ray spectroscopy (EDXS) and electron backscatter diffraction (EBSD) as well as X-ray diffraction in the Θ–2Θ setup (XRD). The immediate surface shows the oriented nucleation of walstromite as well as the formation of wollastonite and an unknown phase of the composition BaCaSi3O8. All three phases also grow into the bulk where walstromite ultimately dominates the kinetic selection and grows throughout the bulk due to a lack of bulk nucleation. Walstromite shows systematic orientation changes as well as twinning during growth. A critical analysis of the XRD-patterns acquired from various crystallized samples indicates that their evaluation is problematic and that phases detected by XRD in this system should be verified by another method such as EDXS.
Up to now, the mechanisms of surface nucleation and surface-induced texture formation are far from being understood. Corresponding phenomena are discussed hypothetically or even controversial, and related studies are restricted to very few glasses. In this talk the state of the art on mechanisms of surface nucleation are summarized. On one hand, mechanical damaged surfaces show high nucleation activity, at which the nucleation occurs at convex tips and edges preferentially. On the other hand, solid foreign particles are dominant nucleation sites at low damaged surfaces. They enable nucleation at temperatures even far above Tg. The nucleation activity of the particles is substantially controlled by their thermal and chemical durability. But no systematic studies on initially oriented crystal growth or nucleation from defined active nucleation sites have been pursued, so far. Therefore, the main objective of a just started project is to advance the basic understanding of the mechanisms of surface-induced microstructure formation in glass ceramics. We shall answer the question whether preferred orientation of surface crystals is the result of oriented nucleation or caused by other orientation selection mechanisms acting during early crystal growth. In both cases, crystal orientation may be caused by the orientation of the glass surface itself or the anisotropy and orientation of active surface nucleation defects. As a first attempt we focused on possible reorientation of separately growing surface crystals during early crystal growth. First results show clear evidence that separately growing crystals can reorient themselves as they are going to impinge each other.
Sintered bioactive glass scaffolds of defined shape and porosity, e.g. made via additive manufacturing, must provide sufficient bioactivity and sinterability. As higher bioactivity is often linked to high corrosion and crystallization tendency, a certain compromise between sintering ability and bioactivity is therefore required. Groh et al. developed a fluoride-containing bioactive glass (F3), which allows fiber drawing and shows a bioactivity well comparable to that of Bioglass®45S5.
To study whether and to what extent the sinterability of F3 glass powder is controlled by particle size, coarse and fine F3 glass powders (300-310µm and 0-32µm) were prepared by crushing, sieving and milling. Sintering, degassing and phase transformation during heating were studied with heating microscopy, vacuum hot extraction (VHE), DTA, XRD, and SEM.
For the coarse glass powder, sintering proceeds slowly and is limited by surface crystallization of primary Na2CaSi2O6 crystals. Although the crystallization onset of Na2CaSi2O6 is shifted to lower temperature, full densification is attained for the fine powder. This finding indicate that certain porosity might be tuned via particle size variation. Above 900°C, intensive foaming is evident for the fine powder. VHE studies revealed that carbon species are the main foaming source.
Borosilicate glasses (16Na2O–10B2O3–74SiO2, NBS) with water contents up to 22 mol% H2O were prepared to study the effect of water on structural relaxation using DTA, viscometry and internal friction measurements. The results show that the glass transition temperature Tg of DTA and the isokom temperature T12, of viscometry are in excellent agreement, confirming the equivalence of enthalpy and viscous relaxation for NBS glass. Combining Tg data with water speciation data demonstrates that OH groups are mainly responsible for the decrease of Tg with increasing hydration, while molecular water plays only a minor role. Internal friction spectra at 7.125 Hz confirm the decisive influence of water on mechanical relaxation. The temperature range of α-relaxation (glass transition) strongly decreases while two β-relaxation peaks (sub-Tg) progressively appear with increasing water content. A high temperature β-relaxation peak, attributed to the presence of OH groups, shifts from 670 to 450 K as total water content increases from 0.01 to 5 wt%. A low temperature β-relaxation peak, attributed to molecular water, appears at 380 K and 330 K in glasses containing 3 and 5 wt% H2O, respectively. These findings suggest that relaxation mechanism of different hydrous species at low temperature may contribute to fatigue of stressed glasses.
Die Festigkeit von Gläsern wird durch die Oberflächenqualität beeinflusst. Kommt es neben dem Auftreten von Defekten zusätzlich zum Risswachstum ausgehend hiervon, wird die Festigkeit minimiert. Das Wachstum hängt dabei maßgeblich von der Luftfeuchtigkeit ab. Dieses Ermüdungsverhalten von Gläsern besser zu verstehen und dabei die Mechanismen und den Einfluss von im Volumen eingebauten Wasser auf das unterkritische Risswachstum zu untersuchen, ist Ziel der Arbeiten. Als Teilprojekt im Rahmen des DFG Schwerpunktprogramms SPP 1594 „Ultrastrong glasses“ soll der Einfluss des im Volumen eingebauten Wassers auf die Rissspitze untersucht werden. Zusammen mit der Leibniz Universität Hannover und der TU Clausthal werden hierfür hochwasserhaltige Gläser (bis zu 8 Gew%) bei 8 kbar über die Flüssigphase synthetisiert, die makroskopisch den hohen Wasseranteil nachstellen. Die Charakterisierung erfolgt hinsichtlich des Wassereinbaus, der mechanischen Eigenschaften und des Risswachstums. Die Arbeiten in Berlin beziehen sich hierbei auf die Messungen des unterkritischen Risswachstums in Luft und Vakuum, sowie Verlustwinkelmessungen.
Erste Ergebnisse zeigen Unterschiede im korrosionsbeeinflussten (langsames) und inerten (schnelles und im Vakuum stattfindendes) Risswachstumsverhalten der untersuchten Gläsern. Die Rissgeschwindigkeit beim Übergang vom korrosionsbeeinflussten zum inerten Risswachstum ist hin¬gegen für alle Gläser ähnlich und folglich ein kinetisch durch den äußeren Wassertransport an die Rissspitze bestimmter Prozess. Der Widerstand gegen Risswachstum steigt mit Tg und zusätzlich kann anhand der Verlustwinkelmessungen ein Zusammenhang zwischen der Netzwerk- und der β-Relaxation ermittelt werden. Je höher der Wassergehalt im Glas ist, desto niedriger wird Tg und einfacher das Risswachstum, welches sich durch längere Risse kennzeichnet. Besonders stark tritt dieser Effekt bei einem Überschuss an molekularem Wasser auf.
Premature failure of glass under load is caused by sub-critical crack growth (SCCG) originate from microscopic flaws at the surface. While SCCG is related to the humidity of the ambient atmosphere, leading to stress corrosion phenomena at the crack tip, the detailed mechanism and the effect of different network formers are still not fully understood. For more clarity, various soda silicate glasses with a second network former were investigated by double cantilever beam technique: Na2O*Al2O3*SiO2 (NAS), Na2O*B2O3*SiO2 (NBS), Na2O*PbO*SiO2 (NPbS).
Three effects on the crack growth velocity, v, versus stress intensity, KI, curves were found out. The slope in region I, which is limited by corrosion, increases in the order NAS < NBS ≲ NPbS. The velocity range of region II reflecting the transition between corrosion effected and inert crack growth (region III), varies within one order of magnitude between the glasses. The KI region of inert crack growth strongly scatters between 0.4 and 0.9 MPam1/2. For comparison, crack growth at different humidity in commercial soda lime silicate glass (NCS) was measured.
Statistical analysis of Vickers induced subcritical crack growth in soda-lime silicate glasses
(2018)
Studies on Vickers induced subcritical crack growth are controversially discussed since the stresses that drive the crack growth are distributed three dimensionally within the material and cannot be retraced by available methods. Hence, empirical approaches are used to calculate mechanical material parameters such as the stress intensity factor KI. However, the results of these approaches show large deviations from those measured by standardized techniques such as double cantilever beam (DCB) or double cleavage drilled compression (DCDC). Yet, small specimen sizes and low specimen quantities can prevent the execution of DCB and DCDC measurements. Here we present an approach that is based on a statistical analysis of Vickers induced radial cracks. For this purpose more than 150 single radial cracks were analyzed. The cracks were generated in a commercial soda-lime silicate glass. The experiments were performed in a glovebox purged with dry nitrogen gas to minimize the influence of atmospheric water on crack growth. The temporally resolved evolution of the radial cracks was monitored in-situ using an inverted microscope equipped with a camera system directly below the Vickers indenter. An automated image analysis software was used to determine the crack length over time. The data show that the crack propagation and thereby the crack velocities are not uniformly but statistically distributed. These findings allow, using the statistical mean value of the distributions in combination with DCB data, a precise formulation of KI for each measured crack length.
The presence of water in the surrounding atmosphere of a propagating crack has a major influence on the subcritical crack growth. While these external phenomena are well understood, there is still a lack of knowledge on the influence of structurally bound water on crack propagation. Thus, our recent study aims on the analysis of crack propagation in water bearing soda-lime silicate glasses with up to 8 wt.% water. The samples were synthesized in an internally heated pressure vessel at 0.5 GPa. Since this preparation route limits the sample sizes, standard test geometries allowing for the determination of stress intensity factors, such as double cantilever beam, are not feasible. Thus, radial cracks in the hydrous glasses were initiated by Vickers indentation and crack growth was simultaneously captured with a camera system. An automated image analysis algorithm was used for the analysis of the crack length of each single video frame. To minimize influences by atmospheric water, all experiments were conducted in a glovebox purged with dry N2. About 150 cracks per glass composition were analyzed to provide statistical significance of the Vickers-induced SCCG. The results show that structurally bound water has a major influence on SCCG by means of crack lengths, growth rates and time of crack initiation.