Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Erscheinungsjahr
- 2023 (113) (entfernen)
Dokumenttyp
- Vortrag (113)
Referierte Publikation
- nein (113)
Schlagworte
- Additive Fertigung (14)
- Wasserstoff (11)
- Additive manufacturing (9)
- Ultraschallunterstütztes Fräsen (9)
- Welding (9)
- Hochfester Stahl (8)
- Mechanical properties (8)
- TIG welding (8)
- Additive Manufacturing (7)
- Eigenspannungen (7)
- Hydrogen (7)
- LIBS (7)
- Oberflächenintegrität (7)
- Schweißen (7)
- Laser beam welding (6)
- Residual stress (6)
- In situ measurement (5)
- Microstructure (5)
- Duplex stainless steel (4)
- Electromagnetic backing (4)
- Fügetechnik (4)
- Laser hybrid welding (4)
- Legierungsmodifikation (4)
- Pipeline (4)
- Pipelines (4)
- Studie (4)
- WRC 1992 diagram (4)
- Werkzeugverschleiß (4)
- Charpy impact toughness (3)
- DED-Arc (3)
- Digital image correlation (3)
- Digitalisation (3)
- Dissimilar metal weld (DMW) joint (3)
- Fatigue (3)
- Forschung (3)
- High-entropy alloy (3)
- Hydrogen assisted cracking (3)
- ISO 3690 (3)
- Multi-principal element alloys (3)
- Numerical modeling (3)
- Reparatur (3)
- Research (3)
- Submerged arc welding (3)
- Thick-plate welding (3)
- Varestraint-Test (3)
- Zerspankräfte (3)
- AlSi10Mg (2)
- Calibration free (2)
- Carrier gas hot extraction (2)
- Cold cracking (2)
- Cyclic R-curve (2)
- Deep penetration laser beam welding (2)
- Digitalisierung (2)
- Dissimilar metal weld (2)
- Duplex Stainless Steel (2)
- Eisenaluminid (2)
- Fatigue crack propagation (2)
- Fracture Mechanics (2)
- Grain refinement (2)
- Heat accumulation (2)
- High strength steel (2)
- High-pressure (2)
- High-strength steel (2)
- High-strength steels (2)
- Hohlzugprobe (2)
- Inconel 718 (2)
- Laser Powder Bed Fusion (2)
- Laser powder bed fusion (2)
- Life Cycle Assessment (2)
- Microstructure characterization (2)
- Numerical simulation (2)
- Offshore (2)
- PBF-LB/M (2)
- Quality Assurance (2)
- Qualitätsinfrastruktur (2)
- Repair Welding (2)
- Repair-welding (2)
- Residual stresses (2)
- Short crack (2)
- Solidification cracking (2)
- Steel (2)
- Thermal cycles (2)
- Thermography (2)
- Wasserstofftechnologien (2)
- (U)HMWPE (1)
- 100Cr6 (1)
- AGIL (1)
- AISI 316L (1)
- Additive manufacturing (AM) (1)
- Adiabatic shear bands (1)
- Ageing (1)
- Arc welding (1)
- Auftragschweißen (1)
- Bauteilversuch (1)
- Biotische/abiotische Faktoren (1)
- Bruchmechanik (1)
- Build direction (1)
- Chunky graphite (1)
- Chunky-Graphit (1)
- Cold cracking safety (1)
- Component Assessment (1)
- Component assessment (1)
- Component test (1)
- Computed Tomography (1)
- Crack closure (1)
- Crack propagation (1)
- Creep (1)
- Creep-resistant steel (1)
- Crystal branch development (1)
- DED-arc (1)
- Database (1)
- Dataspace (1)
- Debye-Waller-Faktor (1)
- Defekte (1)
- Diffraction (1)
- Diffusion (1)
- Digital Image Correlation (DIC) (1)
- Digital image correlation (DIC) (1)
- Digitale Bildkorrelation (DIC) (1)
- Digitale Qualitätssicherung (1)
- Ductile Cast Iron (1)
- Duktiles Gusseisen (1)
- Duplex stainless steels (1)
- Dynamic Fracture Toughness (1)
- Dynamische Beanspruchung (1)
- EA4T railway axle steel (1)
- Erneuerbare Energien (1)
- Failure Assessment Diagram (1)
- Fatigue limit (1)
- Fatigue threshold (1)
- Ferngasleitung (1)
- Ferritic spheroidal (1)
- Filler wire mixing (1)
- Finite Element Analysis (1)
- Finite element analysis (1)
- Fracture toughness (1)
- Friction (1)
- Friction stir welding (1)
- Fusion welding (1)
- Gradient-enhanced damage (1)
- Graphite cast iron (1)
- Graphitentartung (1)
- Gusseisen mit Kugelgraphit (1)
- Gusseisen mit Kugelgraphit GJS (1)
- H2-Abbau (1)
- H2Safety@BAM (1)
- Harmonisation (1)
- Heat control (1)
- Heat treatment (1)
- Heat treatments (1)
- Heating rate (1)
- Heißrisse (1)
- High strength AlMgSi aluminium alloys (1)
- High temperature alloys (1)
- High-power laser (1)
- High-resolution camera (1)
- High-strength (1)
- High-strength Steels (1)
- High-strength filler metals (1)
- Hochdruck (1)
- Hochentropiewerkstoff (1)
- Hollow tensile specimen (1)
- Hybrid components (1)
- Hybrid part (1)
- Hybrid repair (1)
- Imperfektion (1)
- In situ monitoring (1)
- In-service (1)
- Infractstructure (1)
- Infrared thermography (1)
- Ionic liquid (1)
- Irradiation (1)
- Joining (1)
- Kaltrissbildung (1)
- Keyhole collapse (1)
- Keyhole dynamics (1)
- Keyhole porosity (1)
- Kontamination von H2 (1)
- LIPSS (1)
- Laboratory specimens (1)
- Laser energy absorption (1)
- Laser energy distribution (1)
- Laser welding (1)
- Laser-based powder bed fusion of metal (PBF-LB/M) (1)
- Lattice structure (1)
- Lubrication (1)
- MAG welding (1)
- MIC (1)
- Magnetic field (1)
- Master Curve Method (1)
- Master Curve-Konzept (1)
- MatCom (1)
- Materialprüfung (1)
- Measurement (1)
- Mechanische Eigenschaften (1)
- Melt pool dinamics (1)
- Messung (1)
- Metallschutzgasschweißen (1)
- Metals (1)
- Mikroorganismen (1)
- Mock-up (1)
- ModuH2Pipe@BAM (1)
- Molten pool (1)
- Multiple-principal element alloy (1)
- Normung (1)
- Offshore wind turbine (1)
- Oscillating magnetic field (1)
- Oscillating vapor plume (1)
- PAG (1)
- PBF-LB/M/316L (1)
- PBF/LB-M (1)
- Periodic solidification pattern (1)
- Phase field modeling (1)
- Porosity (1)
- Position detection (1)
- Post processing heat treatment (1)
- Preciptiates (1)
- Probabilistic Assessment (1)
- Probengeometrie (1)
- Process Monitoring (1)
- Process Simulation (1)
- Process parameter optimization (1)
- Prüfung (1)
- Prüfverfahren (1)
- QI Digital (1)
- Quality-X (1)
- Qualitätssicherung (1)
- Quantification (1)
- Ray tracing (1)
- Recognition (1)
- Reduced Order Model (1)
- Representative Specimens (1)
- Representative specimens (1)
- Residual Stress (1)
- Residual Stresses (1)
- Review (1)
- Riss (1)
- Rührreibschweißen (1)
- SHPB (1)
- Schweißverbindung (1)
- Schwer spanbar (1)
- Shielding gas (1)
- Split Hopkinson bar (1)
- Standardization (1)
- Stress relief cracking (1)
- Structure (1)
- Surface integrity (1)
- Temperature dependent absorption (1)
- Tensile performance (1)
- Tensile properties (1)
- Testing (1)
- Thermal desorption analysis (1)
- Thermal history (1)
- Thick-walled steel (1)
- Thoughness (1)
- TiAl64V (1)
- Tool wear (1)
- Tribology (1)
- Trägergasheißextraktion (1)
- Ultrasonic assisted milling (1)
- Unterirdische Speicher (1)
- Viscoplasticity (1)
- WAAM (1)
- WAXD (1)
- Wasserstofflagerung (1)
- Wear (1)
- Weld pool dynamics (1)
- Weldments (1)
- Werkstatt (1)
- Werkzeuglebensdauer (1)
- Wind energy (1)
- i-TRIBOMAT (1)
- Überblick (1)
Organisationseinheit der BAM
- 9 Komponentensicherheit (113) (entfernen)
Eingeladener Vortrag
- nein (113) (entfernen)
Direct energy deposition additive manufacturing technologies utilizing an electric arc offer a great potential in generating large volume metal components. However, the selection of process parameters that yield the desired near net shape design as well as the requested mechanical component behavior is not a trivial task due to the complex relationship. Exemplarily for additive manufacturing of high-strength precipitation hardening AlMgSi-aluminum alloy this paper shows the application of a newly developed matching solid welding wire doped with TiB as grain refiner. The correlation between process parameters and component quality is examined analyzing the size and distribution of pores as well as the grain morphology. Furthermore, the influences of different post-weld heat treatments are evaluated to meet the reference mechanical properties of the corresponding wrought material. Finally, the digital integration of the entire additive manufacturing chain enables an overall traceability of the relevant process steps which is the basis for a reliable subsequent quality assessment.
In manufacturing, fusion welding processes use a lot of resources, which presents an opportunity to reduce environmental impact. While there is a general understanding of the environmental impact of these processes, it is difficult to quantitatively assess key parameters. This study introduces a welding-specific methodology that uses life cycle assessment (LCA) to evaluate the environmental impact of fusion welding technologies. Our approach analyses the main parameters that affect the environmental performance of different welding techniques, including traditional methods and additive manufacturing through the Direct Energy Deposition-Arc (DED-Arc) process. We integrate real-time resource usage data to offer an innovative framework for directly deriving environmental impacts. This research contributes to optimising welding processes by providing a precise and quantifiable measure of their ecological impact, facilitating the advancement of sustainable manufacturing practices.
Life cycle assessment of fusion welding processes considering upstream and downstream process steps
(2023)
In manufacturing, fusion welding processes consume significant resources, presenting a significant opportunity for reducing environmental impact. Although there is a qualitative understanding of the environmental implications of these processes, a quantitative assessment of key parameters remains complex. This study introduces a welding-specific methodology that employs life cycle assessment (LCA) to quantitatively evaluate the environmental footprint of fusion welding technologies. Our approach identifies and analyses the principal parameters affecting the environmental performance of various welding techniques, including traditional joint welding and additive manufacturing via the Direct Energy Deposition-Arc (DED-Arc) process. Real-time resource usage data is integrated to offer an innovative framework for directly deriving environmental impacts. This research contributes to optimising welding processes by providing a precise and quantifiable measure of their ecological impact. This facilitates the advancement of sustainable manufacturing practices.
In der Abschlusspräsentation des ZIM-Kooperationsvorhabens "TeWuFeAl" werden die wichtigsten Ergebnisse zusammengefasst dargestellt. Ziel des Projektes war die Entwicklung einer Prozess- und Werkzeugtechnologie für das ultraschallunterstützte Fräsen von im Kokillenguss hergestellter Eisen- und Titan-Aluminid-Bauteilen. Auf Basis einer eigens entwickelten Werkzeugtechnologie und Prozessführung konnten die Belastungen auf das Werkzeug und die Oberfläche von Bauteilen aus dem schwer zerspanbaren Eisenaluminid bei der frästechnischen Bearbeitung signifikant verringert werden. Die Messung der Prozesskräfte und der thermischen Belastung der Werkzeugschneide ermöglicht die Ermittlung geeigneter Zerspanungsparameter für eine maximale Werkzeuglebensdauer. Die Anwendung des ultraschallunterstützten Fräsens (USAM) wirkt sich vorteilhaft auf den Zerspanprozess aus. Neben einer deutlichen verlängerung der Werkzeuglebensdauer, zeigen sich Vorteile in Bezug auf die topographischen, metallurgischen sowie mechanischen Eigenschaften der erzeugten Oberflächenintegrität. Die durch USAM erzeugte homogene Bauteiloberfläche weist eine reduzierte Defektdichte und verringerte Rauheitskennwerte auf. Besonders vielversprechend sind die Ergebnisse der Messungen der Eigenspannungen im Tiefenprofil der Oberfläche. Die Werkzeugoszillation bewirkt eine, vergleichbar zum Strahlprozess, Verdichtung der Oberfläche was in Druckeigenspannungen resultiert. Diese potenziell vorteilhaften Druckeigenspannungen können maßgeblich zur Risssicherheit hochbelasteter Komponenten und somit zum Leichtbau und Ressourceneffizienz beitragen.
Additive manufacturing (AM) processes enable the efficient production of advanced constructions. New developments in topology optimization are leading to weight-optimized designs of increasing complexity. Direct energy deposition processes (DED) such as wire and arc-based additive manufacturing are an important method of additive manufacturing. The wire filler metals enable a wide range of materials, while the arc process provides a high deposition rate compared to laser and powder-based processes. Combined with the use of high-strength steels, the thickness of walls or components can be significantly reduced in the context of lightweight construction, which results in significant savings in energy, costs, time and resources. Suitable high-strength steel filler metals are commercially available for DED-arc AM processes. However, guidelines and quantitative knowledge about welding stresses and cold cracking issues during component production and service are lacking. This limits the industrial application considerably. In a joint project of BAM and Chemnitz University of Technology, the main influences and complex interactions of material, production process, design and processing steps on the residual stress level are investigated. The aim is to develop processing recommendations and a cold cracking test for economical processing and stress-related design of high-strength steels with DED-arc. This study focuses on residual stress analysis by neutron diffraction (ND) and X-ray diffraction (XRD) on defined test specimens. The ND analysis were performed at the Paul Scherrer Institute- Villigen, Switzerland (PSI) and the XRD analysis at BAM. The study shows a quantitative and qualitative comparison of the residual stress magnitudes and distribution between the component bulk (ND) and surface (XRD) analyses. The ND analysis reveals that in DED-arc AM walls the residual stresses dominate in the direction of welding and are negligibly small in each case transverse to the direction of welding. The topology of the analyzed residual stresses shows almost identical residual stress maps compared to XRD. In addition, the residual stresses are significantly influenced by the solid phase transformation of the material due to low cooling times and less post heat treatment cycles of following AM layers in the area of the top layer.
Additive manufacturing (AM) processes enable the efficient production of advanced constructions. New developments in topology optimization are leading to weight-optimized designs of increasing complexity. Direct energy deposition processes (DED) such as wire and arc-based additive manufacturing are an important method of additive manufacturing. The wire filler metals enable a wide range of materials, while the arc process provides a high deposition rate compared to laser and powder-based processes. Combined with the use of high-strength steels, the thickness of walls or components can be significantly reduced in the context of lightweight construction, which results in significant savings in energy, costs, time and resources. Suitable high-strength steel filler metals are commercially available for DED-arc AM processes. However, guidelines and quantitative knowledge about welding stresses and cold cracking issues during component production and service are lacking. This limits the industrial application considerably. In a joint project of BAM and Chemnitz University of Technology, the main influences and complex interactions of material, production process, design and processing steps on the residual stress level are investigated. The aim is to develop processing recommendations and a cold cracking test for economical processing and stress-related design of high-strength steels with DED-arc. This study focuses on residual stress analysis by neutron diffraction (ND) and X-ray diffraction (XRD) on defined test specimens. The ND analysis were performed at the Paul Scherrer Institute- Villigen, Switzerland (PSI) and the XRD analysis at BAM. The study shows a quantitative and qualitative comparison of the residual stress magnitudes and distribution between the component bulk (ND) and surface (XRD) analyses. The ND analysis reveals that in DED-arc AM walls the residual stresses dominate in the direction of welding and are negligibly small in each case transverse to the direction of welding. The topology of the analyzed residual stresses shows almost identical residual stress maps compared to XRD. In addition, the residual stresses are significantly influenced by the solid phase transformation of the material due to low cooling times and less post heat treatment cycles of following AM layers in the area of the top layer.
Additive manufacturing (AM) processes enable the efficient production of advanced constructions. New developments in topology optimization are leading to weight-optimized designs of increasing complexity. Direct energy deposition processes (DED) such as wire and arc-based additive manufacturing are an important method of additive manufacturing. The wire filler metals enable a wide range of materials, while the arc process provides a high deposition rate compared to laser and powder-based processes. Combined with the use of high-strength steels, the thickness of walls or components can be significantly reduced in the context of lightweight construction, which results in significant savings in energy, costs, time and resources. Suitable high-strength steel filler metals are commercially available for DED-arc AM processes. However, guidelines and quantitative knowledge about welding stresses and cold cracking issues during component production and service are lacking. This limits the industrial application considerably. In a joint project of BAM and Chemnitz University of Technology, the main influences and complex interactions of material, production process, design and processing steps on the residual stress level are investigated. The aim is to develop processing recommendations and a cold cracking test for economical processing and stress-related design of high-strength steels with DED-arc. This study focuses on residual stress analysis by neutron diffraction (ND) and X-ray diffraction (XRD) on defined test specimens. The ND analysis were performed at the Paul Scherrer Institute- Villigen, Switzerland (PSI) and the XRD analysis at BAM. The study shows a quantitative and qualitative comparison of the residual stress magnitudes and distribution between the component bulk (ND) and surface (XRD) analyses. The ND analysis reveals that in DED-arc AM walls the residual stresses dominate in the direction of welding and are negligibly small in each case transverse to the direction of welding. The topology of the analyzed residual stresses shows almost identical residual stress maps compared to XRD. In addition, the residual stresses are significantly influenced by the solid phase transformation of the material due to low cooling times and less post heat treatment cycles of following AM layers in the area of the top layer.
Stresses in repair welding of high-strength steels Part 2: Heat Control and Stress Optimization
(2023)
In welding of high-strength steels, e.g., for foundations and erection structures of wind energy plants, unacceptable defects can occasionally be found in the weld area, which should be removed by thermal gouging and subsequent re-welding. High shrinkage restraint of repair welds may lead to crack formation and component failure, particularly in interaction with degraded microstructures and mechanical properties due to repair cycles. This study aims for elaboration of recommendations for repair concepts appropriate to the stresses and materials involved to avoid cold cracking, damage and expensive reworking. In part 1 [1] of this study systematic investigations of influences of shrinkage restraint on residual stresses and cold cracking risk during repair welding of two high-strength steels S500MLO for offshore application and S960QL for mobile crane structures were focussed. In this part 2, the microstructure and residual stresses due to gouging and influences of heat control parameters in repair welding are analysed. A clear reduction in residual stress after gouging can be observed, especially for the specimens with restrained transverse shrinkage. Gouging to a depth of approx. 2/3 of the seam height does not lead to a complete relaxation of the observed reaction forces. Particularly for the higher strength steel S960QL, there are pronounced areas influenced by the gouging process in which a degradation of the microstructure and properties should be assumed. Overall, the repair welds show a significant increase in the width of the weld and HAZ compared to the original weld, especially in the case of S960QL/G89. The repair welds show higher welding-induced stresses than the original welds, especially in the areas of the HAZ and the base metal close to the weld seam. This behaviour can be attributed overall to increased restraint conditions due to the remaining root weld or shorter gouge grooves. In good agreement with earlier investigations, the residual stresses transverse to the weld can be significantly reduced by upwardly limited working or interpass temperatures and the reaction stresses resulting from high restraint conditions can be effectively counteracted. The influence of the heat input on the stress formation is low compared to the interpass temperature for both test materials.
The sustainable and resource-efficient production of wind energy plants requires the use of modern high-strength fine-grain structural steels. This applies to both foundation and erection structures, like mobile or ship cranes. During the assembly of steel structures, unacceptable defects can occasionally be found in the weld area. In most cases, the economical solution would be local thermal gouging of the affected areas and re-welding. Due to the high shrinkage restraint of the joint groove in the overall structure, the superposition of global and local welding-induced stresses may lead to crack formation and component failure, particularly in interaction with the degradation of the microstructure and mechanical properties of high-strength steels during the repair process. However, manufacturers hardly have any information about these issues and there is a lack of recommendations and guidelines to take these safety-relevant aspects into account in adequate repair concepts. The aim of this research is to derive recommendations for repair concepts appropriate to the stresses and materials involved providing a basis for standards and guidelines to avoid cold cracking, damage and expensive reworking especially for high-strength steels. Part 1 of this study involves systematic investigations of influences of shrinkage restraint during repair welding of two high-strength steels S500MLO for offshore application and S960QL for mobile crane structures. The quantification of the shrinkage restraint of repair weld joints was achieved by means of experimental and numerical restraint intensity analysis. In welding experiments with self-restrained slot specimens, restraint intensity and introduction of hydrogen via the welding arc using anti spatter spray were varied systematically to analyse the effect on welding result, residual stresses, and cold cracking. It could be shown that increasing restraint intensities result in significantly higher transverse residual stress levels. In the case of hydrogen introduction S500MLO showed no cold cracking independent of the restraint conditions. However, S960QL was found to be considerably cold cracking sensitive if hydrogen is introduced. With increasing restraint intensity length and number of cold cracks increases significantly. Part 2 [1] of this study is focussed on microstructure and residual stresses due to gouging and stress optimization via adequate heat control parameters in repair welding.