Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Erscheinungsjahr
- 2016 (2)
Dokumenttyp
- Vortrag (2) (entfernen)
Sprache
- Englisch (2)
Referierte Publikation
- nein (2)
Schlagworte
- Damage (2) (entfernen)
Eingeladener Vortrag
- nein (2)
A significant number of German concrete motorway pavements have shown damage only a few years after construction. The alkali-silica-reaction (ASR) is often one of the reasons for this damage. German guidelines and regulations focus on the optimisation of the concrete composition to avoid damage due to ASR. Moreover, diverse research projects have dealt with the development and optimisation of ASR performance test methods with and without external alkali supply.
However, the influence of other parameters on the occurrence and intensity of a damaging ASR had not yet been taken into account. Such parameters include, e.g., insufficient curing and the modifications of concrete’s porosity due to the use of slip form pavers. Likewise, the increased traffic loading had not yet been considered. The Federal Institute for Materials Research and Testing (BAM) assesses these parameters and processes in a number of projects. These projects aim primarily to increase the durability of the concrete pavements, in particular by improving preventive measures that may be taken before or after the construction of concrete pavements. This paper gives a short overview of BAM’s projects concerning ASR in concrete pavements. Furthermore, results regarding the influence of the cyclic traffic loading on ASR are presented.
Strain hardening ultra high performance fibre reinforced cementitious composites (UH-PFRCC) exhibit increased strength, ductility, and energy absorption capacity when compared to their quasi-brittle, unreinforced counterparts. A mesoscale finite element model can depict the underlying causes for the structural response of UHPFRC and thus help to optimize the fibre content, the fibre dimensions, and the fibre orientation.
Furthermore, it facilitates the investigation of strain rate effects in UHPFRCC under dynamic loading. The mesoscale model can either be used directly or as a representative volume element for a macroscale model.
This work proposes a two-dimensional and a three- dimensional mesoscale finite element model to simulate the structural response of strain hardening UHPFRCC. The mesoscale model employs an implicit gradient enhanced damage model, proposed by Peerlings et al., for the cement matrix and a local bond stress-slip model, proposed by Elige-hausen, Popov, and Bertero, for the bond between the cement matrix and the steel fibres. The steel fibres are modeled discretely as one-dimensional truss elements that are coupled to the cement matrix via bond elements. The implementation of hooked end fibres is realized in the constitutive equations of the bond elements.
The tensile stress-strain response of UHPFRCC is a consequence of local matrix cracking and bond failure. Both phenomena can be depicted when modeling the cement matrix, the steel fibres, and the fibre-to-matrix bond explicitly. In this work, the parameters for the constitutive equations of each constituent are determined through uniaxial Tension tests, bending tests, and fibre pullout tests. Additionally, UHPFRCC specimens are simulated with the same parameters and compared to experimental results.