Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Dokumenttyp
Sprache
- Englisch (83)
- Deutsch (8)
- Portugiesisch (1)
Schlagworte
- Cement (19)
- Rheology (13)
- Superplasticizer (8)
- Structural build-up (7)
- Alkali-activated materials (6)
- Cement hydration (6)
- Hydration (6)
- Concrete (5)
- Thixotropy (5)
- BOFS (4)
- Early hydration (4)
- Microstructure (4)
- Polysaccharides (4)
- Portland cement (4)
- Rheological properties (4)
- Additive manufacturing (3)
- Adsorption (3)
- Cement paste (3)
- DFG SPP 2005 (3)
- Durability (3)
- Hydraulic reactivity (3)
- Hydrothermal treatment (3)
- Polycarboxylate ether (PCE) (3)
- 3D concrete printing (2)
- AAM (2)
- Admixture (2)
- Alite (2)
- Basic oxygen furnace slag (2)
- Bio-based concrete (2)
- Brown coal fly ash (2)
- C3A (2)
- C3A hydration (2)
- Calcined clay (2)
- Calcium sulfoaluminate cement (2)
- Ceramics (2)
- Characterization (2)
- Chemical admixtures (2)
- Compressive strength (2)
- Delayed addition (2)
- Depletion force (2)
- Education (2)
- Engineered recycled mineral admixtures (2)
- Ettringite (2)
- Fließmittel (2)
- GGBFS (2)
- In-situ XRD (2)
- Internal sulfate resistance (2)
- Laser-induced slip casting (2)
- MIC (2)
- Material characterization (2)
- Microbially induced corrosion (2)
- Model calibration (2)
- Modelling (2)
- Mortar (2)
- Papierasche (2)
- Penetration test (2)
- Polycarboxylate ether (2)
- Polycarboxylatether (2)
- Polyphosphate (2)
- Pore solution composition (2)
- Redox potential (2)
- Rheologie (2)
- Silica beads (2)
- Slag (2)
- Sr isotopes (2)
- Steel corrosion (2)
- Sulfide (2)
- Sustainability (2)
- Test methods (2)
- Zementleim (2)
- 1H NMR relaxometry (1)
- AFM (1)
- Accelerated test (1)
- Accelerated testing (1)
- Accelerator (1)
- Acid resistance (1)
- Acoustic emission (1)
- Admixtures (1)
- Agricultural by-product (1)
- Alite hydraulic reactivity (1)
- Alkali aktivierte Bindemittel (1)
- Alkali silica reaction (1)
- Alkali-activated concrete (1)
- Alkali-activated slag (1)
- Alternative materials (1)
- Açaí fiber (1)
- Berliner Tuffsteinfassaden (1)
- Betondickglasfenster des Glockenturms am Eiermannbau (1)
- Bindemittel (1)
- Biochar (1)
- Biogene Schwefelsäurekorrosion (1)
- Biogenic acid corrosion (1)
- Building with earth (1)
- C&D waste (1)
- C3S (1)
- Calcium silicate (1)
- Calcium sulfoaluminate (CSA) cement (1)
- Carbon dioxide emissions (1)
- Carbon footprint (1)
- Carbonation (1)
- Charge density (1)
- Circular economy (1)
- Civil Engineering (1)
- Climate (1)
- Clinker reduction, carbon emission (1)
- Clinker substitute (1)
- Compatibility (1)
- Compressed earth (1)
- Corrosion (1)
- Corrosion inhibitor (1)
- Cracks (1)
- Critical chloride content (1)
- Crystalline admixture (1)
- Damage analysis (1)
- Decarbonisation (1)
- Defect detection (1)
- Demolition wastes (1)
- Denkmalpflege (1)
- Dissolution (1)
- Dredging mud (1)
- Dye (1)
- Dyes (1)
- Earth block masonry (1)
- Environment (1)
- Environmental benefits (1)
- Erdbau (1)
- Ettringen tuff (1)
- Fassade (1)
- Fire spalling (1)
- Fluidity (1)
- Fluorescence (1)
- Free polymer (1)
- Frost salt attack (1)
- Future‑oriented standards (1)
- Geopolymers (1)
- Gold mit Synchrotronstrahlung (1)
- Green urban construction (1)
- Heat flow calorimetry (1)
- Hybride Zemente (1)
- Hydratationswärme (1)
- Hydration kinetics (1)
- Hydration products (1)
- Hydration stoppage (1)
- Hydrogarnet (1)
- Hydrothermal Calcination (1)
- Hydrothermale Calcinierung (1)
- Hydroxylellestadite (1)
- Impacts (1)
- Inorganic polymers (1)
- Interfacial forces (1)
- Interlaboratory test (1)
- Ionic stregth (1)
- Ions (1)
- Iron ore tailings (1)
- Iron speciation (1)
- Kaiser-Wilhelm-Gedächtniskirche (1)
- Kalorimetrie (1)
- Kalzinierter Ton (1)
- Kandelaber des Ensembles am Charlottenburger Tor (1)
- Kieselsol (1)
- Lattices (1)
- Layered double hydroxide (1)
- Lehmstabilisierung (1)
- Leichte Gesteinskörnung (1)
- Limestone powder (1)
- Lithium (1)
- Lithium aluminosilicates (1)
- Load-bearing behaviour (1)
- Low-carbon construction (1)
- Low-cement concrete (1)
- Lunar regolith (1)
- Materials (1)
- Mauerwerkbruch (1)
- Method development (1)
- Mining tailing (1)
- Mining tailings (1)
- Mitigation strategies (1)
- Moisture content (1)
- Moisture transport (1)
- Nanosilica (NS) (1)
- Natural fibers (1)
- Non-destructive testing (1)
- Nonferrous slag (1)
- Optical spectroscopie (1)
- PCE (1)
- PCE-Based superplasticizer (1)
- Packing density (1)
- Paper sludge ash (1)
- Paste (1)
- Pergamonmuseums (1)
- Phase development (1)
- Photoluminescence (1)
- Polycarboxylate ether (PCE), (1)
- Polycarboxylate superplasticizer (1)
- Polycarboxylate superplasticizers (PCE) (1)
- Polymers (1)
- Polypropylene fiber (1)
- Polyvinyl alcohol fiber (1)
- Pore solution (1)
- Pore structure (1)
- Porosity (1)
- Portland Cement (1)
- Portland clinker (1)
- Potassium ions (1)
- Provenance (1)
- Provenancing (1)
- Putz (1)
- Quality assurance (1)
- Quartzite mining tailing (1)
- Radiografische Untersuchung (1)
- Raman spectroscopy (1)
- Rammed earth (1)
- Recycled aggregate (1)
- Recycled materials (1)
- Recycled mineral admixture (1)
- Reflection spectroscopy (1)
- Reinforced concrete (1)
- Resource (1)
- Resting time (1)
- Reststoffe (1)
- Retardation (1)
- Rheological (1)
- Rheological property (1)
- Rheometry (1)
- Rice husk ash (1)
- Road pavement (1)
- Rohstoffliches Recycling (1)
- Sample piece size (1)
- Schalenbildung (1)
- Schriftrollen vom Toten Meer (1)
- Sciences (1)
- Self-healing (1)
- Sensitivity (1)
- Setting (1)
- Sintering (1)
- Sisal fiber (1)
- Soaking time (1)
- Softening temperature (1)
- Sol-gel (1)
- Solvent replacement (1)
- Sorption isotherm (1)
- Speichermaterial (1)
- Stability (1)
- Steam-cured concrete (1)
- Steel slag (1)
- Steel-concrete interface (1)
- Steelmaking slag (1)
- Stray current (1)
- Sulfate resistant cement (SRC) (1)
- Superplasticizers (1)
- Supplementary cementitious material (1)
- Supplementary cementitous materials (1)
- Sustainable cement (1)
- Sustainable construction (1)
- Test setup (1)
- Testing procedure (1)
- Texture analyzer (1)
- Thermal analysis (1)
- Thermal treatment (1)
- Tobermorite (1)
- Tuff (1)
- Tuffstein (1)
- UHPC (1)
- Ultrasound gel (1)
- Upscaling (1)
- Verwitterung (1)
- Viscosity modifying agents (1)
- Wasserbeständigkeit (1)
- Waste management (1)
- Weathering (1)
- Weibern tuff (1)
- Working mechanism (1)
- X-ray absorption near-edge structure (1)
- X-ray absorption spectroscopy (1)
- X-ray diffraction (1)
- Yield stress (1)
- Zement (1)
Organisationseinheit der BAM
- 7.4 Baustofftechnologie (92) (entfernen)
Eingeladener Vortrag
- nein (22)
Ground Granulated Blast-Furnace Slag (GGBFS), a by-product of the iron-making process, has gained significant attention as a supplementary cementitious material and has become increasingly popular in recent years due to its remarkable properties. GGBFS can significantly reduce the environmental impact of cement production when it comes to building concrete structures. GGBFS can either be blended with ordinary Portland cement (OPC) (up to a 90% replacement), or it can be used in the production of alkali-activated materials (AAMs). However, a comprehensive understanding of the pore solution composition is necessary for understanding various aspects of cementitious materials and their durability, including corrosion behavior, passivation of steel, and resistance to deteriorative processes. In the present work, the pore solutions of seven different GGBFS-containing cements (alkali-activated slag, alkali-activated slag/fly ash blends, a hybrid alkaline cement, CEM III/C, and CEM III/B) were extracted and analysed by inductively coupled plasma-optical emission spectroscopy, ion chromatography, pH, redox potential, and conductivity measurements. For comparison, a Portland cement pore solution was analysed similarly. The Concentrations of reduced sulfur were noteworthy in all GGBFS-containing cements, particularly in alkali-activated cements, where concentrations were notably higher compared to standard cements. The redox potentials of the pore solutions were primarily dictated by the concentrations of reduced sulfur, although other factors may contribute. Additionally, sulfur species in the pore solutions had an impact on pH, electrical conductivity, and other properties pertinent to the corrosion of reinforcements.
While alkali-activated binders offer certain advantages over traditional Portland cement binders, particu¬larly in terms of resistance against chemical attacks and potentially environmental footprint, their degra¬dation mechanisms remain incompletely understood at present, specifically carbonation. Thus, this study investigates the impact of natural and accelerated carbonation (1% and 4% CO2) on three different compositions of alkali-activated concretes: 100% calcined clay (C100) binder, 100% ground blast furnace slag (S100) binder, and a 40% calcined clay and 60% blast furnace slag blend (C40S60). C100 concretes exhibit faster carbonation kinetics, with five times greater natural carbonation depths than S100. This difference diminishes under accelerated carbonation, showing a 1.5 times difference for 1% CO2 and complete carbonation for 4% CO2 at 90 days. The results thus confirm that accelerated carbonation testing of low-Ca alkali-activated concretes yields results that are not representative of natural carbonation. The C40S60 sample demonstrates a carbonation profile similar to a CEM I concrete, i.e., a high carbonation resistance. Microstructure analysis indicates the formation of three polymorphs of calcium carbonate for S100 (calcite, vaterite, and aragonite), with a higher CO2 concentration favouring aragonite over vaterite. C100 exhibits no calcium carbonates; instead, sodium carbonates form, including trona for 4% CO2 and natrite for both accelerated tests. C40S60 shows calcium and sodium carbonates, although to a lesser extent, containing predominantly calcite and minor signals of natrite. Suitable compositions, like C40S60, prove as effective during natural or accelerated carbonation tests as conventional Portland cement concrete.
Esta pesquisa avaliou o fenômeno de autocicatrização nas propriedades mecânicas e absorção capilar de concretos estruturais. Foram avaliados dois aditivos cristalizantes em pó, dosados de acordo com o teor recomendado pelos fabricantes. Aditivos cristalizantes aumentam a densidade do gel C-S-H e formam cristais insolúveis, bloqueando fissuras. Três traços de concreto foram produzidos: referência, aditivo-X com 0,8% e aditivo-Y com 2,0% em relação a massa do cimento. Aplicou-se 75% da carga de ruptura aos 3- e 14-dias para gerar microfissuras e comparar com a referência. Posteriormente, a autocicatrização foi avaliada aos 28- e 76-dias. A propriedade de resistência à compressão axial foi determinada aos 28-dias, revelando que os aditivos cristalizantes contribuíram para um aumento médio de 12% desta propriedade. A idade do carregamento dos concretos não apresentou um impacto significativo na resistência à compressão axial, mas apontou resultados significativos entre os tipos de aditivos estudados, conforme ANOVA. As propriedades de absorção de água por capilaridade foram avaliadas aos 28- e 76-dias, indicando uma redução de absorção de água média de 42% devido ao uso dos aditivos cristalizantes. Em conclusão, a incorporação dos aditivos cristalizantes contribuiu de maneira positiva para a autocicatrização dos concretos estudados, indicando uma recuperação parcial das microfissuras.
The output of C&D waste is increasing year by year, among which low-quality recycled brick aggregates (RBAs) have not been well utilized and brought environmental burden. The durability of steam-cured concrete (HCC) is often compromised due to the detrimental effects of this curing regime on the long-term performance and microstructure development of the concrete material. To address this issue, this study investigates the potential of incorporating RBAs to improve the long-term durability of HCC. The results demonstrate that the incorporation of a small amount of RBA (10–20%) not only enhances the 28-d strength of HCC by 2.5–11.3%, but also improves its impermeability by mitigating heat damage effects. The combined application of fine and coarse RBA was found to effectively balance the negative effects of coarse RBA on the performance of HCC. Furthermore, the utilization of RBA in HCC was shown to have economic and environmental benefits. The results of this study demonstrate a simple and effective approach to improve the long-term durability of HCC while promoting the high-value utilization of solid waste.
Future lunar exploration will be based on in-situ resource utilization (ISRU) techniques. The most abundant raw material on the Moon is lunar regolith, which, however, is very scarce on Earth, making the study of simulants a necessity. The objective of this study is to characterize and investigate the sintering behavior of EAC-1A lunar regolith simulant. The characterization of the simulant included the determination of the phase assemblage, characteristic temperatures determination and water content analysis. The results are discussed in the context of sintering experiments of EAC-1A simulant, which showed that the material can be sintered to a relative density close to 90%, but only within a very narrow range of temperatures (20–30 °C). Sintering experiments were performed for sieved and unsieved, as well as for dried and non-dried specimens of EAC-1A. In addition, an analysis of the densification and mechanical properties of the sintered specimens was done. The sintering experiments at different temperatures showed that the finest fraction of sieved simulant can reach a higher maximum sintering temperature, and consequently a higher densification and biaxial strength. The non-dried powder exhibited higher densification and biaxial strength after sintering compared to the dried specimen. This difference was explained with a higher green density of the non-dried powder during pressing, rather than due to an actual influence on the sintering mechanism. Nevertheless, drying the powder prior to sintering is important to avoid the overestimation of the strength of specimens to be fabricated on the Moon.
It is well known that cement manufacture, including CaCO3 calcination and clinker formation, is associated with substantial energy consumption and significant greenhouse gas emissions. Alkali-activated binders (AAB) and concretes made from them can significantly contribute to reducing CO2 emissions caused by the construction industry. However, to what extent and for how long concretes made from AAB can protect the steel in reinforced concrete components from corrosion is still unclear. Unlike PC-based binders, AABs are made by reacting alkaline solutions with solid precursors such as fly ash and ground granulated blast furnace slag (GGBFS). Therefore, steel reinforcement corrosion mechanisms in AAMs differ from PC-based binders. The present study aims to evaluate the corrosion behavior of steel rebar in alkali-activated materials (AAMs) synthetic pore solution with different chemical concentrations representing different GGBFS and Flay Ash based binders by performing electrochemical tests to measure the corrosion rate and corrosion potential of steel rebar. This information can be used to improve the design of AAMs in order to ensure a longer service life for these materials.
Admixtures are important constituents to enhance the performance of concrete. They allow for more efficient use of binders which can mitigate negative environmental impacts from producing cement-based materials. Commonly used rheology modifying agents like polycarboxylate ethers or cellulose ethers are synthetic or semi-synthetic, respectively. This requires additional energy consumption for their production and global supply chains particularly for many developing regions, which will be large consumers of concrete in the future. However, many locally available bio-based polysaccharides could be effectively used instead. These polymers are often overlooked by engineers and scientists due to their limited distribution and inherent complexity, yet they represent an underleveraged source of precursors for admixtures. This study investigates the action mechanisms of some bio-based rheology modifying agents, i.e., acacia gum and miscanthus gum, and provides a comparison to a conventionally modified starch. The results show that the mechanism of action of these polymers is closely related to the composition of the mixture, mixing regime, and the composition of the aqueous phase. Depending on the agent, either plasticizing or stabilizing effects on rheology can be revealed.
The effect of resting time on the rheological properties of cement suspensions is generally explained by early formed structure and overconsumption of polycarboxylate superplasticizers (PCEs). In this paper, we propose that the influence of resting time on the rheological properties is closely related to size variation of non-absorbed PCE. To identify this, glass bead suspensions were prepared with various amounts of PCE and ionic solution, and their rheological properties were evaluated at various times. We found that the yield stress increases with time at higher PCE concentrations and higher ionic strength solutions. Adsorbed PCE during resting tends to bridge the particles rather than disperse them. In addition, it was found that hydrodynamic radius of PCE increased with resting time, and depletion forces resulting from non-absorbed PCE size changes correlate well with the increased yield stress.
In this paper, we demonstrate the value of 1H NMR
relaxometry for studying the hydration of clinker-reduced, more
climate-friendly cementitious binders. The results were obtained
on typical CEM I cements and samples containing two different
reactive agricultural ashes as well as non-reactive biochars as
supplementary cementitious materials. The findings prove that
time-resolved NMR measurements provide valuable additional
information when combined with classical heat flow calorimetry.
Steelmaking slag is a by-product of steel production of which 4.5 Mt were produced in 2020 in Germany alone. It is mainly used in road construction, earthwork and hydraulic engineering. A smaller part is returned to the metallurgical circle, used as fertilizer or landfilled.
With this use, iron oxides still contained in steelmaking slag are lost. In addition, the possibility of producing higher-grade products from steelmaking slag is foregone. In recent decades, many researchers have investigated the production of Portland cement clinker and crude iron from basic oxygen furnace slags (BOFS) via a reductive treatment. Carbothermal treatment of liquid BOFS causes a reduction of iron oxides to metallic iron, which separates from the mineral phase due to its higher density. Simultaneously, the chemical composition of the reduced slag is adapted to that of the Portland cement clinker.
In this study, German BOFS was reduced in a small-scale electric arc furnace using petrol coke as a reducing agent. The resulting low-iron mineral product had a similar chemical composition to Portland cement clinker and was rich in the tricalcium silicate solid solution alite (Ca3SiO5). Based on its chemical and mineralogical composition, similar to that of Portland cement clinker, the reduced BOFS has the potential to react comparably. In our study, the reduced BOFS produced less heat of hydration compared to OPC and its hydraulic reaction was delayed. However, adding gypsum has been shown to accelerate the hydration rate of the reduced BOFS compared to that known from the calcium silicates of Portland cement clinker.
Further research to improve the hydraulic properties of the reduced slag is essential. If successful, producing a hydraulic binder and crude iron from BOFS could have economic and ecological benefits for both the cement and steel industry.