Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Dokumenttyp
- Vortrag (32) (entfernen)
Sprache
- Englisch (32)
Referierte Publikation
- nein (32)
Schlagworte
- Broadband dielectric spectroscopy (6)
- Dielectric spectroscopy (3)
- Thin polymer films (3)
- Thin polymeric films (3)
- Discotic Liquid Crystals (2)
- Discotic liquid crystals (2)
- Neutron scattering (2)
- Polymer based nanocomposites (2)
- Polymers with intrinsic microporosity (2)
- Broadband Dielectric Spectroscopy (1)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (32)
In the course of miniaturizing modern technology down to the molecular scale, understanding the materials behavior has to be investigated and deviations from the bulk that might arises from confinement effects has to be understood. Here, a combination of nano-sized relaxation spectroscopies (Broadband dielectric spectroscopy (BDS) and Specific heat spectroscopy (SHS); employing AC nanochip calorimetry) were utilized to investigate the glassy dynamics of ultra-thin films of blends of Poly (vinyl methyl ether) (PVME) / Polystyrene (PS) 50:50 wt-%, which are miscible bulk (thicknesses: 8nm - 200nm, film thickness was controlled by ellipsometry, film topography by AFM). Both methods are sensitive to different probes; where SHS senses entropy fluctuations while BDS measures dipole fluctuations. For BDS measurements, a recently developed nano-structured electrode sample arrangement is employed; where ultra-thin films are spin-coated on an ultra-flat highly conductive silicon wafer, sandwiched between a wafer with nanostructured SiO2 nano-spacers with heights between 35 nm and 70 nm. The method was applied for film thicknesses up to 50 nm. For thicker films, the samples were prepared between crossed electrodes. It was proven that, for 50 nm films, both contact methods will lead to identical results. By measuring the dynamic Tg in dependence of the film thickness, SHS showed that the Tg of the whole film was strongly influenced by a nanometer-thick surface layer at the polymer/air interface due to a self-assembling process [1]. The dynamic Tg obtained from the SHS measurements decrease with decreasing film thickness, evidencing the importance of a mobile surface layer at the polymer/air interface for the glass transition of the whole film. Compared to the SHS results, the BDS measurements show a completely different behavior. At high temperatures, the temperature dependence of the relaxation times of the films follows that of bulk-like PS/PVME; obeying the VFT-law. With decreasing temperature, the temperature dependence deviates from the VFT to an Arrhenius law; where the apparent activation energy decreases with decreasing film thickness. This is the first example where confinement induced changes were observed by BDS for ultra-thin films. All results were analyzed in details in a comprehensive discussion.
The basics of broadband dielectric spectroscopy were introduced in detail. The analysis of the data was discussed. As application of broadband dielectric spectroscopy the alpha-relaxation (dynamic glass transition) and the chain dynamics of polymers were ilustrated. Further the application of dielectric spectroscopy to polymerbased nanocomposites and high preformance polymers was discussed in Detail.
The basics of broadband dielectric spectroscopy were introduced in detail. The analysis of the data was discussed. As application of broadband dielectric spectroscopy the alpha-relaxation (dynamic glass transition), the chain dynamics of polymers, and the behavior of a high performance polymer were illustrated.
The basics of broadband dielectric spectroscopy were introduced in detail. The analysis of the data was discussed. As application of broadband dielectric spectroscopy the alpha-relaxation (dynamic glass transition) and the chain dynamics of polymers were illustrated. Further the application of dielectric spectroscopy to advanced functional materials.
Broadband dielectric spectroscopy in the frequency range from 10-1 to 109 Hz is employed to revisit the segmental dynamics of the miscible blend system poly(vinyl methyl ether)/polystyrene (PVME/PS) in dependence on the composition firstly in the bulk state. Here especially the case of high polystyrene concentrations is considered. It is important to note that only the molecular dynamics of PVME segments as affected by PS is observed because the dipole moment of polystyrene is negligible. Three relaxation processes are found which are due to fluctuations of differently constrained or confined PVME segments. The degree of the confinement of PVME segments due to PS is discussed in dependence on the composition.
Further a spatial confinement is considered by investigating thin films of the PVME/PS blend where the film thickness was varied from 100 nm down to 5 nm. Two concentrations of PVME/PS (50/50 wt% and 25/75 wt%) are investigated. To measure nanometer thick films a novel electrode system based on nanostructured electrodes was employed. Nanostructured electrodes can be considered as a cut-edge technology in dielectric spectroscopy. The relaxation spectra of the films showed multiple processes which are discussed in dependence on the film thickness.
The basics of broadband dielectric spectroscopy were introduced in detail. The analysis of the data was discussed. As application of broadband dielectric spectroscopy the alpha-relaxation (dynamic glass transition) and the chain dynamics of polymers were ilustrated. Further the application of dielectric spectroscopy to polymerbased nanocomposites and high preformance polymers was discussed in detail.
In the course of miniaturizing modern technology down to the molecular scale, understanding the materials behavior has to be investigated and deviations from the bulk have to be understood. A combination of nano-sized relaxation spectroscopies (Broadband Dielectric Spectroscopy (BDS) and Specific Heat Spectroscopy (SHS)) employing AC nanochip calorimetry were utilized to investigate the glassy dynamics of ultra-thin films of blends of Poly (vinyl methyl ether) (PVME) / Polystyrene (PS) (50:50 and 25/75 wt-%), which are miscible in the bulk (thicknesses: 8nm - 200nm, film thickness was controlled by ellipsometry, film topography by AFM). Both methods are sensitive to different probes; where SHS senses entropy fluctuations BDS measures dipole fluctuations. For BDS measurements, a recently developed nano-structured electrode sample arrangement is employed. By measuring the dynamic glass transition in dependence of the film thickness, SHS showed that the Tg of the whole film was strongly influenced by a nanometer-thick surface layer at the polymer/air interface due to a self-assembling process. Compared to the SHS results the BDS measurements show a completely different behavior. At high temperatures the temperature dependence of the relaxation times of the films follows that of bulk-like PS/PVME obeying the VFT-law. With decreasing temperature the temperature dependence deviates from the VFT to an Arrhenius law where the apparent activation energy decreases with decreasing film thickness. This is the first example were confinement induced changes were observed by BDS for ultra-thin films. All results were analyzed in detail in a comprehensive discussion.
Semicrystalline polymers have to be described by a three phase model consisting of a mobile amorphous (MAF), a crystalline (CF), and a rigid amorphous fraction (RAF). For nanocomposites based on a semicrystalline polymer the RAF is due to both the crystallites (RAFcrystal) and the filler (RAFfiller). In most cases a separation of both contributions is not possible without further assumptions. Polymer nanocomposite based on poly(L-lactide) and MgAl layered double hydroxide nanofiller were prepared. Due to the low crystallization rate of PLA its crystallization can be suppressed by a high enough cooling rate, and the RAF is due only to the nanofiller. The MAF, CF, and RAF were estimated by Temperature Modulated DSC. For the first time CF, MAF, RAFcrystal, and RAFfiller could be estimated. It was found, that RAFfiller increases linearly with the concentration of the nanofiller. Furthermore, RAFcrystal is only slightly influenced by the presence of the nanofiller.