Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Erscheinungsjahr
Dokumenttyp
- Vortrag (53)
- Beitrag zu einem Tagungsband (19)
- Posterpräsentation (5)
- Zeitschriftenartikel (3)
- Buchkapitel (3)
- Forschungsbericht (2)
- Beitrag zu einem Sammelband (1)
Referierte Publikation
- nein (86) (entfernen)
Schlagworte
- Hydrogen (27)
- Welding (26)
- Wasserstoff (16)
- Schweißen (12)
- Diffusion (11)
- Fügetechnik (8)
- High-entropy alloy (8)
- Hydrogen assisted cracking (8)
- Creep-resistant steel (7)
- Forschung (6)
- Carrier gas hot extraction (5)
- ISO 3690 (5)
- Mechanical properties (5)
- Microstructure (5)
- Studie (5)
- Thermal desorption analysis (5)
- Degradation (4)
- Pipelines (4)
- Research (4)
- Review (4)
- UP-Schweißen (4)
- Electrochemical permeation (3)
- High Entropy Alloy (3)
- High-strength steel (3)
- Hydrogen diffusion (3)
- Spannungsrelaxationsriss (3)
- Submerged arc welding (3)
- Wasserstofftechnologien (3)
- Weld metal (3)
- Wärmenachbehandlung (3)
- Additive manufacturing (2)
- Component (2)
- Component Test (2)
- Corrosion (2)
- Creep-resistant Steel (2)
- Diffusion Coefficient (2)
- Experimental design (2)
- High-strength Steel (2)
- Hochfest (2)
- Hydrogen concentration (2)
- Kaltrissprüfung (2)
- MAG Welding (2)
- Machining (2)
- Numerical Modeling (2)
- Numerical modeling (2)
- Offshore (2)
- Permeation (2)
- Pipeline (2)
- Prüfverfahren (2)
- Residual Stresses (2)
- Scanning kelvin probe force microscopy (2)
- Stahl (2)
- Steel (2)
- Stress corrosion cracking (2)
- TIG welding (2)
- Acicular ferrite (1)
- Activation energy (1)
- Additive Fertigung (1)
- Aerospace materials (1)
- Anlagenbau (1)
- Application properties (1)
- Arc melting technique (1)
- Austenitic stainless steel (1)
- Bauteilversuch (1)
- Bedarf (1)
- Bedeutung (1)
- Calculation (1)
- Carrier Gas Hot Extraction (1)
- Carrier gas hot extraction (CGHE) (1)
- Charpy toughness (1)
- Chemical corrosion (1)
- Component test (1)
- Constitution diagram (1)
- Cooling rate (1)
- Corrosion testing (1)
- Cracking (1)
- Creep resisting materials (1)
- Creep-resisting materials (1)
- Degradation of Mechanical Properties (1)
- Dickblech (1)
- Digital Image Correlation (DIC) (1)
- Dissimilar metal weld (1)
- Dissimilar metal weld (DMW) joint (1)
- Dissimilar weld joints (1)
- Duplex stainless steel (1)
- Eigenspannungen (1)
- Electrochemical corrosion (1)
- Elevated Temperatures (1)
- Elevated temperatures (1)
- Embrittlement (1)
- Energieerzeugung (1)
- Ersatzgeometrie (1)
- FSW (1)
- Forschungsprojekt (1)
- Friction stir welding (1)
- Gas analytic (1)
- Handbook (1)
- Heat control (1)
- Heat treatment (1)
- Heat treatment condition (1)
- High entropy alloy (1)
- High manganese steel (1)
- High strength steel (1)
- High strength steels (1)
- High-Strength Steel (1)
- High-pressure (1)
- High-strength (1)
- High-strength steels (1)
- Hochentropie Legierung (1)
- Hochentropielegierung (1)
- Hochfeste Stähle (1)
- Hochfester Stahl (1)
- Hollow tensile specimen (1)
- Hydrogen embrittlement (1)
- Hydrogen measurement (1)
- Hydrogen trapping (1)
- I-Girder (1)
- I-Träger (1)
- I-girder (1)
- Imperfektion (1)
- Infractstructure (1)
- Joining (1)
- Joining process (1)
- Kaltriss (1)
- Kaltrissbildung (1)
- Komponenten (1)
- Korrosion (1)
- Korrosionsschutz (1)
- Loch- u. Spaltkorrosion (1)
- Material properties (1)
- Measurement (1)
- Medium entropy alloy (1)
- Mediumentropie Legierung (1)
- Messung (1)
- Metallurgie (1)
- Metals (1)
- Minimum waiting time (1)
- Mischverbindung (1)
- Mock-up (1)
- Multi-principal element alloys (1)
- Multielement-Legierung (1)
- Multielementlegierungen (1)
- Multiple principal element alloy (1)
- Multiple-principal element alloy (1)
- NDT (1)
- Normung (1)
- Numerical Simulation (1)
- Numerical simulation (1)
- Numerische Simulation (1)
- Overview (1)
- PWHT (1)
- Perspektiven (1)
- Post weld heat treatment (1)
- Pressure Vessel Steel (1)
- Process parameters (1)
- Processing (1)
- Prozesse (1)
- Repair Welding (1)
- Reparatur (1)
- Research and Development (1)
- Residual Stress (1)
- Riss (1)
- Rührreibschweißen (1)
- Schallemissionsanalyse (1)
- Schweißeigenspannungen (1)
- Schweißeignung (1)
- Schweißverbindung (1)
- Sectioning method (1)
- Spannungsrelaxationsrisse (1)
- Spannungsrisskorrosion (1)
- Standardization (1)
- Stress relief cracking (1)
- Surface Integrity (1)
- Surface integrity (1)
- T24 / 7CrMoVTiB10-10 (1)
- Technologies (1)
- Temperature (1)
- Temperature effect (1)
- Testing (1)
- Thermal desorption analysis (TDA) (1)
- Thoughness (1)
- Traglastverhalten (1)
- Trapping and diffusion (1)
- Trägergasheißextraktion (1)
- UP Schweißen (1)
- Ultra high strength steels (1)
- Ultrasonic Assisted Machining (1)
- Ultrasonic machining (1)
- Ultrasonic-assisted milling (1)
- WIG (1)
- Waiting time (1)
- Warmfeste Stähle (1)
- Weld Joint (1)
- Weld heat input (1)
- Weld joint (1)
- Weld residual stresses (1)
- Welding parameters (1)
- Werkstoff (1)
- Werkstoffe (1)
- Wärmebehandlung (1)
- carrier gas hot extraction (1)
Organisationseinheit der BAM
- 9 Komponentensicherheit (68)
- 9.0 Abteilungsleitung und andere (60)
- 9.4 Integrität von Schweißverbindungen (43)
- 9.2 Versuchsanlagen und Prüftechnik (17)
- 6 Materialchemie (3)
- 6.2 Material- und Oberflächentechnologien (3)
- 8 Zerstörungsfreie Prüfung (2)
- 8.4 Akustische und elektromagnetische Verfahren (2)
- 5 Werkstofftechnik (1)
- 5.1 Mikrostruktur Design und Degradation (1)
Paper des Monats
- ja (1)
The presentation gives an overview of BAM's activities on processing influences and application properties of MPEAs in the form of joined and machined high and medium entropy alloys (CoCrFeMnNi and CoCrNi). In the case of welding, the focus is on defect-free welded joints with sufficient mechanical properties. In the case of machining, the focus is on the possible influence on the surface quality of the materials through adequate milling parameters. In addition, the hydrogen absorption and diffusion properties as well as the electrochemical corrosion behavior are fundamentally examined.
For the hydrogen-based energy economy of tomorrow, the construction of the necessary infrastructure will play a central role. Most materials used to date, such as welded steels, can be prone to hydrogen embrittlement under certain conditions. This includes the classic delayed cold cracking during welding as well as degradation phenomena during service of components in hydrogen-containing environment. For the evaluation of any hydrogen effect, for example, on the mechanical properties of a welded metallic material, the hydrogen content must be precisely determined. In the case of weld seams, the carrier gas hot extraction (CGHE) according to ISO 3690 is meanwhile state-of-the-art. CGHE is based on accelerated hydrogen degassing due to the thermal activation of hydrogen at elevated temperatures. In addition to the quantification of hydrogen, thermal desorption analysis (TDA) with varying heating rates can be used to determine and evaluate the hydrogen trapping at microstructural defects in the material. For both techniques, experimental and metrological influences must be considered, which have a major effect on the result. For example, ISO 3690 suggests different sample geometries and minimum extraction times for CGHE. This study summarizes the results and experiences of numerous investigations at the Federal Institute for Materials Research and Testing (BAM) with different sample temperatures and geometries (ISO 3690 type B and cylindrical TDA samples) regarding the influence of the sample surface (polished/welded), measurement accuracy depending on the sample volume and the insufficient monitoring of the effect of PI control on the extraction temperature. A deviating extraction temperature from the target temperature can significantly falsify the measurement results. Based on the results, methods are shown which allow the desired extraction temperature to be reached quickly without physically interfering with the measuring equipment. This serves to significantly improve the reliability of the hydrogen measurement through increased signal stability and accelerated hydrogen desorption. In general, an independent temperature measurement with dummy samples is recommended for the heating procedure of choice to exclude possible undesired temperature influences before the measurement. The methods described can be transferred directly to industrial applications
Wasserstoff erfüllt die zentrale Rolle für die Umwandlung der bisherigen fossil-basierten Energieerzeugung und -nutzung auf eine dekarbonisierte, nachhaltige Form. Dazu muss der Wasserstoff erzeugt, gespeichert, transportiert werden, bevor er wieder der Nutzung zugeführt wird. Hierzu sind entlang der gesamtem Prozesskette Wasserstofftechnologien notwendig, die einen sicheren Betrieb erfordern. Hierbei kommt dem schweißtechnischen Anlagen- und Behälterbau wesentliche Bedeutung zu, insbesondere (aber nicht ausschließlich) für Speicherung und Transport des Wasserstoffes. Der vorliegende Beitrag gibt einen kurzen Überblick, wo und wie die konventionelle Schweißtechnik hierzu wichtige Beiträge leistet. Die additive Fertigung, also das „Drucken“ von Bauteilen wird dabei zunehmend wichtiger, entlang der gesamtem Prozesskette der Wasserstofftechnologien. Gleichwohl darf nicht unterschätzt werden, dass auch wesentlicher Bedarf an der Erweiterung und teilweiser Neufassung von bestehenden Regel- und Normenwerken besteht.
Wasserstoff erfüllt die zentrale Rolle für die Umwandlung der bisherigen fossil-basierten Energieerzeugung und -nutzung auf eine dekarbonisierte, nachhaltige Form. Dazu muss der Wasserstoff erzeugt, gespeichert, transportiert werden, bevor er wieder der Nutzung zugeführt wird. Hierzu sind entlang der gesamtem Prozesskette Wasserstofftechnologien notwendig, die einen sicheren Betrieb erfordern. Hierbei kommt dem schweißtechnischen Anlagen- und Behälterbau wesentliche Bedeutung zu, insbesondere (aber nicht ausschließlich) für Speicherung und Transport des Wasserstoffes. Der vorliegende Beitrag gibt einen kurzen Überblick, wo und wie die konventionelle Schweißtechnik hierzu wichtige Beiträge leistet. Die additive Fertigung, also das „Drucken“ von Bauteilen wird dabei zunehmend wichtiger, entlang der gesamtem Prozesskette der Wasserstofftechnologien. Gleichwohl darf nicht unterschätzt werden, dass auch wesentlicher Bedarf an der Erweiterung und teilweiser Neufassung von bestehenden Regel- und Normenwerken besteht.
In the course of tomorrow's hydrogen-based energy transition, the construction of the corresponding infrastructure will play a central role. In that context, large diameter long-distance transmission pipelines for hydrogen will be the backbone in the European Union with service pressures from 70 to 90 bar (e.g., de-pending on national regulations). It is a major goal to repurposing the existing natural gas (NG) infrastructure despite the necessity of new pipelines. From that point of view repair welding or further welding of branch pipe etc. can be necessary during in-service, i.e., permanent flow of pressurized hydrogen. The reason is that a shut-down of large diameter pipelines is not easy or sometimes merely impossible. At the moment, it is entirely open if current repair welding procedures for NG pipe-lines can be transferred to pure hydrogen pipelines. For that reason, a collaborative project between BAM, DVGW (German Association for Gas and Water Professions) and a large number of gas grid operators, pipeline manufacturers and construction companies was initiated in 2023 to answer questions on: (1) How many hydrogen is additionally absorbed during the preheating and maintaining at interpass temperature under remaining operational pressures? (2) Is the hydrogen concentration sufficient to reach a critical condition? (3)Which material and weld microstructure are the most susceptible? (4) Is there a difference in the repair welding behavior of NG pipelines with materials in “used” condition? (5) Which welding parameters and joint dimensions must be ensured for safe repair welding? The final aim of this project is the publication of a recommended practice for repair welding of in-service hydrogen pipelines. For that reason, the present study gives an overview on: (A) current practice in repair welding of in-service pipelines and (b) plans for hydrogen pipelines and first results of international research projects.
This contribution briefly summarizes the standardization activities in accordance with the "Nationale Roadmap Wasserstofftechnologien" and presents selected results on the activities in Germany with scope on hydrogen transport in pipelines. The talk was given during a panel discussion to set-up a steering committee for standardization for hydrogen pipelines and welding , coordinated by the International Institute of Welding.
Der Vortrag gibt einen kurzen Überblick über die Bedeutung der Fügetechnik in Wasserstofftechnologien und über zukünftige FuE-Bereiche. Fügetechnologien haben dabei wesentliche Bedeutung für die Umsetzung von technischen Komponenten der Wasserstofftechnologien. Forschungsschwerpunkte ergeben sich insbesondere für die Erzeugung und den Transport des Wasserstoffs.
Offshore wind turbines (OWT) are a key factor of the sustainable energy generation of tomorrow. The continuously increasing installation depths and weight of the OWTs require suitable foundation concepts like monopiles or tripods. Typically, mild steels like the S420ML are used with plate thicknesses up to several hundreds of mm causing high restraints in the weld joints. Due to the large plate thickness, submerged arc welding (SAW) with multiple wires is the state-of-the-art welding procedure. As a result of the very high stiffness of the construction, a certain susceptibility for time-delayed hydrogen-assisted cracking (HAC) may occur. The evaluation of crack susceptibility is very complex due to the component size and stiffness of real offshore structures. For this purpose, a near-component test geometry was developed to transfer the real stiffness conditions to laboratory (i.e., workshop) scale. The investigated mock-up, weighing 350 kg, comprised heavy plates (thickness 50 mm, seam length 1,000 m) joined by a 22-pass submerged arc weld. Additional stiffeners simulated the effect of high restraint or shrinkage restraint of the weld. Extreme scenarios of hydrogen absorption during welding were simulated via the use of welding fluxes in dry (HD < 5 ml/100g Fe) and moisture condition (HD > 15 ml/100g Fe). The residual stresses were determined by a robot X-ray diffractometer. Areas of critical tensile residual stress (at the level of the yield strength) were found in the weld metal and heat affected zone. To identify possible delayed cracking, the welds were tested by phased array ultrasonic testing (PAUT) after 48 h. Summarized, no significant occurrence of HAC was detected, indicating the high crack resistance of the welded joint, i.e., a suitable combination of base material, welding consumable and welding parameters.
The study provides an overview of the aspects of joining and its importance in manufacturing of components for the more and more important field of hydrogen as key factor for the energy transition to a decarburized future. To this end, the fundamentals of the technology fields of hydrogen production, storage, transport, and application are presented and the state of the art of manufacturing of components for hydrogen technologies by joining is summarized. Based on representative examples from practice, research and development, the importance of joining technology in hydrogen technologies is clearly highlighted and perspectives for the future are derived. From a macroeconomic perspective, the focal points, or trends of joining technologies here include: the erection of new infrastructure for hydrogen storage and transport, and the safe conversion of existing natural gas infrastructure and its challenges for welded materials. In addition, we show the problems that are anticipated with in-service repair welding of hydrogen pipelines. In hydrogen applications, the efficient mass production of fuel cells and electrolysers is becoming increasingly important. For that reason, the importance of additive manufacturing is highlighted. Finally, the challenges for technical regulations and standardization by using hydrogen are shown.
Multi-principal element alloys (MPEAs) are innovative materials that have attracted extensive research attention within the last decade. MPEAs are characterized by a solid solution of equiatomic metallic elements. Depending on the number of elements, they are also referred as high entropy alloys (HEAs with n ≥ 4 elements like CoCrFeMnNi) and medium-entropy alloys (MEA with n = 3 elements CoCrNi). Depending on the alloy concept, MPEAs show exceptional properties in terms of mechanical performance or corrosion resistance at extreme environments. In that connection, hydrogen and its challenges for the most metallic materials gets more and more important. MPEAs are candidate materials for the substitution of conventional materials like austenitic stainless steels e.g., at very high-pressure up to 1000 bar. Those pressures are typically reached in valves or compressors for refueling of tanks with operational pressure of 700 bar. So far, the susceptibility of HEA/MEAs to hydrogen assisted cracking (if any) and the especially the underlying hydrogen uptake and diffusion was not within the scientific scope and not investigated in detail yet. For that reason, we focused on the hydrogen absorption the characterization of the hydrogen diffusion and trapping at elevated temperatures in a CoCrFeMnNi-HEA (each element with 20 at.-%) and CoCrNi-MEA, each element with 33.3 at.-%). As reference grade, the commercially available austenitic stainless steel AISI 316L was investigated. High-pressure hydrogen charging was conducted at different pressures in autoclave environment with maximum value of 1,000 bar. Thermal desorption analysis (TDA) via carrier gas hot extraction with coupled mass spectrometry was used with a max. heating rate of 0.5 K/s up to 650 °C. The measured desorption spectra of the different samples were deconvoluted into a defined number of individual peaks. The individually calculated peak temperatures allowed the definition of activation energies for predominant trap sites in the respective materials as well as the percentage share of the totally absorbed hydrogen concentration. The results present for the first time the complex interaction of both MPEAs and high-pressure hydrogen charging. A deconvolution of four peaks was selected and a main desorption peak was identified the dominant hydrogen trap containing the biggest share of the absorbed hydrogen concentration. The chemical composition an austenitic phase of both MPEAs is responsible for delayed hydrogen diffusion and strong, but mostly reversible, trapping. The comparison with the 316L samples showed significantly higher activation energies in the MPEAs, whereas hydrogen was also trapped at very high extraction temperatures. The absorbed maximum hydrogen concentration at 1,000 bar was 130 ppm for the CoCrFeMnNi-HEA, 50 ppm for the CoCrNi-MEA and 80 ppm for the 316L. It is interesting that the CoCrFeMnNi-HEA has obviously a way higher trapping capability compared to the conventional austenitic 316L, which could be a major advantage in terms of resistance to hydrogen assisted cracking.