Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Erscheinungsjahr
Dokumenttyp
Schlagworte
- Electron backscatter diffraction (25)
- EBSD (20)
- SEM (9)
- Pattern matching (6)
- Phase identification (6)
- Simulation (6)
- Orientation relationship (5)
- Steel (5)
- Crystal orientation (4)
- EDX (4)
- Kikuchi pattern (4)
- Kikuchi patterns (4)
- Microstructure (4)
- Corrosion (3)
- Energy dispersive x-ray spectroscopy (3)
- FIB (3)
- Gold (3)
- Hydrogen (3)
- Kikuchi diffraction (3)
- Kurdjumov-Sachs (3)
- Meteorite (3)
- Nishiyama-Wassermann (3)
- Porosity (3)
- Single crystal (3)
- Superalloy (3)
- ToF-SIMS (3)
- XRD (3)
- AFM (2)
- Ceramic (2)
- Creep (2)
- Diffusion (2)
- Electron diffraction (2)
- Electron energy (2)
- Embrittlement (2)
- Energy distribution (2)
- GaP (2)
- Gitterkonstanten (2)
- HIP (2)
- Interface (2)
- Iron meteorite (2)
- Lattice parameters (2)
- Martensite (2)
- Ni-base superalloy (2)
- Nickel alloys (2)
- Nickel-based superalloys (2)
- Phasenidentifikation (2)
- Quasicrystal (2)
- Scanning electron microscopy (2)
- TEM (2)
- X-ray diffraction (2)
- 3D printing (1)
- AA2024-T3 (1)
- AISI 304L (1)
- Additive manufacturing (1)
- Al-alloy (1)
- Alloys (1)
- Aluminium oxide (1)
- Angle measurement (1)
- Antiphase boundary (1)
- Approximant (1)
- Austenitic stainless steel (1)
- Automated Bragg angle determination (1)
- Azimuthal projection (1)
- Backscattered electron imaging (1)
- Backscattered electrons (1)
- Bacteria (1)
- Biogeochemical cycling (1)
- Biogeochemistry (1)
- Biomineralisation (1)
- Bragg angles (1)
- Brass (1)
- Carbide phase NbC (1)
- Chalcopyrite (1)
- Channeling (1)
- Characterization (1)
- Chloride (1)
- Chrystal orientation (1)
- Cobald based alloy (1)
- Color coding (1)
- Color key (1)
- Composition (1)
- Coordinate transformation (1)
- Creep strength (1)
- Creep under thermal cycling (1)
- Crystal class (1)
- Crystal lattice period (1)
- Crystal structure (1)
- Crystallography (1)
- Cupriavidus metallidurans (1)
- Data fusion (1)
- Data processing (1)
- Defect density (1)
- Dermbach (1)
- Diaspore (1)
- Dimensional mismatch of crystalline lattice periods (misfit) (1)
- Dislocation structure (1)
- Duplex steel (1)
- Dynamical simulation (1)
- EBSD pattern (1)
- EDS (1)
- Elastic constants (1)
- Electron Rutherford backscattering (1)
- Equal area projection (1)
- Eutectic (1)
- Explosive welding (1)
- Faceting (1)
- Finland (1)
- First derivative (1)
- Friedel's rule (1)
- Fundamental zone (1)
- GaAs (1)
- GaN (1)
- Geometrical model (1)
- Gnomonic projection (1)
- Gnomonic projections (1)
- Grain boundary precipitates (1)
- Grain structure (1)
- Growth competition (1)
- Hardening (1)
- Heat treatment (1)
- Heat-resistant nickel alloys (1)
- Hematite (1)
- Hibbingite (1)
- High temperature corrosion (1)
- High temperature nickel-based eutectic alloys (1)
- High temperatures (1)
- Hot steam (1)
- Hydrogen assisted cracking (1)
- Hydrogen embrittlement (1)
- Hydrogen-assisted cracking (1)
- In-situ composites (1)
- Inconel 718 (1)
- Intensity (1)
- Interdiffusion (1)
- Intermetallic compound (1)
- Invar (1)
- Iron (1)
- Iron meteorites (1)
- Isostatic hot pressing (HIP) (1)
- Kikuchi bands (1)
- Kinematic approach (1)
- Kriechen (1)
- Laser beam melting (1)
- Lattice parameter determination (1)
- Laves phase (1)
- Lean duplex stainless steel (1)
- Light microscopy (1)
- Maghemite (1)
- Magmatic and hydrothermal processes (1)
- Magnetite (1)
- Mean atomic number (1)
- Metal additive manufacturing (1)
- Method combination (1)
- Microstructur (1)
- Microstructure evolution (1)
- Microstructure, γ/γ' misfit (1)
- Misorientation (1)
- Mobility (1)
- Modeling (1)
- Monte Carlo simulation (1)
- Multiphase microstructure (1)
- NGS (1)
- Nanomaterial (1)
- Natural silver wires (1)
- Neutron diffraction (1)
- Nickel alloy (1)
- Nickel-base superalloys (1)
- Nitride (1)
- Non-centrosymmetry (1)
- OpenGL (1)
- Orientation description (1)
- Orientation mapping (1)
- Orientation precision (1)
- Orientation relationships (1)
- Oxidation (1)
- Parabolic flight (1)
- Pattern quality (1)
- Pattern simulation (1)
- Phase analysis (1)
- Phase distribution (1)
- Phase transformation (1)
- Plastic deformation (1)
- Platinum-group-metals (1)
- Polarity (1)
- Pole figure (1)
- Porous materials (1)
- Powder diffraction (1)
- Pre-Columbian ceramics (1)
- Projection center (1)
- Projection imaging (1)
- Projective geometry (1)
- Pseudobrookite (1)
- Pseudosymmetry (1)
- Real-time rotation (1)
- Residual stress (1)
- S-phase (1)
- SEM–EDS/EBSD (1)
- Sample holder (1)
- Sample preparation (1)
- Segregation (1)
- Semiconductor (1)
- Single-crystal (1)
- Single-crystals (1)
- Sphalerite (1)
- Stereographic projection (1)
- Strain (1)
- Structure solution (1)
- Subgroup (1)
- Superconductor (1)
- Superlegierung (1)
- Symmetry groups (1)
- Synchrotron radiations (1)
- Synthesis (1)
- Teaching (1)
- Temper (1)
- Temperature (1)
- Tetragonal distortion (1)
- Tetragonality (1)
- Texture (1)
- Thermobimetal (1)
- Three-dimensional tomographies (1)
- TiO2 (1)
- Time-of-flight secondary ion mass spectrometry (1)
- Titanite (1)
- Transmission Kikuchi diffraction (1)
- Vacancies (1)
- Wear (1)
- X-ray diffraction analysis (1)
- atomic imaging (1)
- crystal orientation (1)
- electron backscatter diffraction (1)
- electron backscattering (1)
- electron diffraction (1)
- holography (1)
- negative crystal growth (1)
- photoemission (1)
- pole figure (1)
- µ-gravity (1)
- γ- и γ'-фазы, период кристаллической решетки (1)
- γ/γ' matrix (1)
- высокие температуры (1)
- жаропрочные нике- левые сплавы (1)
- монокристалл (1)
- рентгеноструктурный анализ (1)
Organisationseinheit der BAM
- 5 Werkstofftechnik (36)
- 5.1 Mikrostruktur Design und Degradation (33)
- 9 Komponentensicherheit (4)
- 5.2 Metallische Hochtemperaturwerkstoffe (3)
- 5.5 Materialmodellierung (3)
- 9.0 Abteilungsleitung und andere (2)
- 1 Analytische Chemie; Referenzmaterialien (1)
- 1.4 Prozessanalytik (1)
- 5.4 Multimateriale Fertigungsprozesse (1)
- 6 Materialchemie (1)
Paper des Monats
- ja (1)
Eingeladener Vortrag
- nein (6)
Using the method of directional solidification, single crystals of experimental nickel-based superalloys with negative, zero, and positive γ/γ' misfits are obtained. The γ' solvus, solidus, and liquidus temperatures of the alloys are determined, and the microstructures of the alloys after directional solidification, heat treatment, and creep tests are investigated. Creep tests are performed at temperatures of 800 and 1000°C. It is found that single crystals of the alloy with a negative γ/γ' misfit have the highest creep resistance and lifetime (the crystal lattice period of the γ' phase is smaller than that of the γ matrix).
To visualize the varying tetragonal distortions in high carbon martensitic steels by EBSD, two different approaches have been applied on backscattered Kikuchi diffraction (BKD) patterns. A band-edge refinement technique called Refined Accuracy (RA) (Oxford Instruments) is compared with a technique called Pattern Matching (PM), which optimizes the fit to a simulated BKD signal. RA distinguishes between hypothetical phases of different fixed 𝑐∕𝑎, while PM determines a best fitting continuous 𝑐∕𝑎 by projective transformation of a master pattern. Both techniques require stored BKD patterns.
The sensitivity of the 𝑐∕𝑎-determination was tested by investigating the microstructure of a ferritic steel with an expected 𝑐∕𝑎 = 1. The influence of the Kikuchi pattern noise on 𝑐∕𝑎 was compared for a single or 40 averaged frames per measuring point, and turned out to be not significant. The application of RA and PM on the martensitic microstructure delivered qualitatively similar maps of 𝑐∕𝑎. The comparison of RA and PM shows that RA is suitably fast and precise during mapping the martensite 𝑐∕𝑎 ratio in analyses of high carbon martensite, especially for fast initial surveys. As RA leads quantitatively to higher noise in 𝑐∕𝑎, the PM analysis can be used for higher precision results.
A band width determination using the first derivative of the band profile systematically underestimates the true Bragg angle. Corrections are proposed to compensate for the resulting offset Δa/a of the mean lattice parameters derived from as many Kikuchi band widths as possible. For dynamically simulated Kikuchi patterns, Δa/a can reach up to 8% for phases with a high mean atomic number Z, whereas for much more common low-Z materials the offset decreases linearly. A predicted offset Δa/a = f(Z) is therefore proposed, which also includes the unit-cell volume and thus takes into account the packing density of the scatterers in the material. Since Z is not always available for unknown phases, its substitution by Zmax, i.e. the atomic number of the heaviest element in the compound, is still acceptable for an approximate correction. For simulated Kikuchi patterns the offset-corrected lattice parameter deviation is Δa/a < 1.5%. The lattice parameter ratios, and the angles α, β and γ between the basis vectors, are not affected at all.1.5%. The lattice parameter ratios, and the angles , and between the basis vectors, are not affected at all.
The derivation of a crystal structure and its phase-specific parameters from a single wide-angle backscattered Kikuchi diffraction pattern requires reliable extraction of the Bragg angles. By means of the first derivative of the lattice profile, an attempt is made to determine fully automatically and reproducibly the band widths in simulated Kikuchi patterns. Even under such ideal conditions (projection centre, wavelength and lattice plane traces are perfectly known), this leads to a lattice parameter distribution whose mean shows a linear offset that correlates with the mean atomic number Z of the pattern-forming phase. The consideration of as many Kikuchi bands as possible reduces the errors that typically occur if only a single band is analysed. On the other hand, the width of the resulting distribution is such that higher image resolution of diffraction patterns, employing longer wavelengths to produce wider bands or the use of higher interference orders is less advantageous than commonly assumed.
This paper presents the results of a study of the morphology and structure at the weld interface in a brass–Invar bimetal, which belongs to the class of so-called thermostatic bimetals, or thermobimetals. The structure of the brass–Invar weld interface was analyzed using optical microscopy and scanning electron microscopy (SEM), with the use of energy-dispersive X-ray (EDX) spectrometry and back-scattered electron diffraction (BSE) to identify the phases. The distribution of the crystallographic orientation of the grains at the weld interface was obtained using an e-Flash HR electron back-scatter diffraction (EBSD) detector and a forward-scatter detector (FSD). The results of the study indicated that the weld interface had the wavy structure typical of explosive welding. The wave crests and troughs showed the presence of melted zones consisting of a disordered Cu–Zn–Fe–Ni solid solution and undissolved Invar particles. The pattern quality map showed that the structure of brass and Invar after explosive welding consisted of grains that were strongly elongated towards the area of the highest intensive plastic flow. In addition, numerous deformation twins, dislocation accumulations and shear bands were observed. Thus, based on the results of this study, the mechanism of Cu–Zn–Fe–Ni structure formation can be proposed.
The morphology of pores partially shrunk during a half-hour HIP at temperature of 1288 °C and pressure of 103 MPa has been investigated in nickel-based superalloy CMSX-4. The investigation resulted in the following findings: surrounding the shrinking pores by a c¢-shell (Ni3Al), faceting of the pores surface by {023} and {011} planes, and formation the submicroscopic satellite pores connected by channels with the neighboring larger pores. It is assumed that the formation of the c¢-shell around the pores and the faceting of the pore surface is due to diffusion processes occurring during pore shrinkage, and therefore these findings can be considered as arguments supporting the vacancy model of pore annihilation. The submicroscopic satellite pores are expected to be the result of dividing the casting pores of a complex initial shape during their shrinking. The connecting channels are probably required for the gas to escape from the rapidly shrinking small satellite pores into the slowly shrinking large pore. Thus, it is reasonable to assume that the casting pores may contain some amount of gas.
A nickel-based eutectic alloy with a γ/γ'-NbC structure was directionally solidified with a planar front. The specimens were tested for creep under sawtooth thermal cycling in the temperature range from 600 to 1100°C. It has been established that the lifetime under the conditions of thermal cycling is about five times shorter than it is predicted by the linear damage accumulation rule on the basis of results of isothermal creep tests. Faster creep under thermal cycling is caused by the rapid coarsening of the γ/γ' microstructure due to the periodic partial dissolution and reprecipitation of the γ' phase in heating and cooling half-cycles.
The temperature dependences of the periods of the crystal lattices of the γ and γ' phases, their dimensional mismatch (misfit), and volume fraction of the γ' phase of an experimental single-crystal hightemperature nickel-based alloy have been determined by X-ray diffraction analysis in the temperature range of 18–1150°C. The temperature ranges in which intense changes in the structural and phase characteristics of the alloy under study take place have been determined.
An analytical model for forecasting the temperature dependence of γ/γ' misfit in heat-resistant nickel alloys is proposed. The model accounts for the concentration dependences of the periods of crystalline lattices of the γ and γ' phases (Vegard law), thermal expansion of the γ and γ' lattices, and dissolution of the γ' phase at high temperatures. Adequacy of calculations of misfit is confirmed by comparison with the results of measurements using methods of X-ray and neutron diffraction. The model is applied for development of a nickel alloy with positive misfit.
Inconel 718 is a precipitation strengthened, nickel-based super alloy of interest for the Additive Manufacturing (AM) of low volume, complex parts to reduce production time and cost compared to conventional subtractive processes. The AM process involves repeated rapid melting, solidification and reheating, which exposes the material to non-equilibrium conditions that affect elemental segregation and the subsequent formation of solidification phases, either beneficial or detrimental. These variations are difficult to characterize due to the small length scale within the micron sized melt pool. To understand how the non-equilibrium conditions affect the initial solidification phases and their critical temperatures, a multi-length scale, multi modal approach has been taken to evaluate various methods for identifying the initial phases formed in the as-built Inconel 718 produced by laser-powder bed fusion (L-PBF) additive manufacturing (AM). Using a range of characterization tools from the bulk differential thermal analysis (DTA) and x-ray diffraction (XRD) to spatially resolved images using a variety of electron microscopy tools, a better understanding is obtained of how these minor phases can be properly identified regarding the amount and size, morphology and distribution. Using the most promising characterization techniques for investigation of the as-built specimens, those techniques were used to evaluate the specimens after various heat treatments. During the sequence of heat treatments, the initial as-built dendritic structures recrystallized into well-defined grains whose size was dependent on the temperature. Although the resulting strength was similar in all heat treated specimens, the elongation increased as the grain size was refined due to differences in the precipitated phase distribution and morphology.